Develop Bugs

[Q] rom help please!!

okay so i have 5 files that came with a stock gs3 i747 recovery folder, and im trying to place them in odin to fix my soft bricked phone. the files start with...
AP
BL
CP
CSC
D2.pit
i know where d2, csc, and bl go on odin, but im not sure about the other 2... please help someone :/

Is the bootloader from the recovery older than the bootloader on your phone? IMHO, confirm the bootloader version on the phone before attempting to flash.
Attempting to downgrade a 4.3 bootloader or flashing an incompatible mode/bootloader combination could brick your phone.
Are the files in a tar.md5 format? Think this is the only format that Odin will recognize.

audit13 said:
Is the bootloader from the recovery older than the bootloader on your phone? IMHO, confirm the bootloader version on the phone before attempting to flash.
Attempting to downgrade a 4.3 bootloader or flashing an incompatible mode/bootloader combination could brick your phone.
Are the files in a tar.md5 format? Think this is the only format that Odin will recognize.
Click to expand...
Click to collapse
im not 99 percent sure of the current bootloader on the phone right now, but my closest guess would be the bootloader from the I747UCUEMJB package i downloaded cause i used this package in the past to fix my phone which was soft bricked like it is now. oh and i figured out where to place everything on odin, but when i start it ends up failing.. heres the text im getting.
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
Looks like you are trying to downgrade the bootloader.

so i loaded the recovery from the folder in odin, and now my phone was on the att logo screen for at least 3 mins, then i went through setup and its saying theres an application preventing wifi from working.

What boot loader and modem are on your phone?

"UPDATE" i booted the phone in safe mode to check if there was an app blocking my wifi from turning on, and it still didnt work. so that means i need to reinstall my 4.3 firmware right?

I think you need a modem to match your bootloader.

Help with Odin error

Hello everyone.
Recently I flashed the Note4Mini Rom available here in the forum. I really like it. Only had a couple of minor issues, however it had a huge issue for me: I couldn't play Hearthstone with it.
So I decided to flash back to the Stock Rom. I downloaded the Portuguese version for my Smartphone (SM-N7505), since I am Portuguese, but when I try to flash it via Odin this is my log file.
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> modem.bin
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And I get the error saying that there was a problem flashing the software and to connect to kies and do the phone recovery thingy. That doesn't work. Kies does not detect the phone (Yes, I installed the drivers and tried both Kies2 and Kies3 and I'm running everything as admin)
Any help will be appreciated I kinda need the phone. I also had it rooted and TWRP installed. I don't know if I still have it after trying to flash the stock ROM but I can't access it anyway.
Cheers.

Quaekk said:
Hello everyone.
Recently I flashed the Note4Mini Rom available here in the forum. I really like it. Only had a couple of minor issues, however it had a huge issue for me: I couldn't play Hearthstone with it.
So I decided to flash back to the Stock Rom. I downloaded the Portuguese version for my Smartphone (SM-N7505), since I am Portuguese, but when I try to flash it via Odin this is my log file.
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> modem.bin
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And I get the error saying that there was a problem flashing the software and to connect to kies and do the phone recovery thingy. That doesn't work. Kies does not detect the phone (Yes, I installed the drivers and tried both Kies2 and Kies3 and I'm running everything as admin)
Any help will be appreciated I kinda need the phone. I also had it rooted and TWRP installed. I don't know if I still have it after trying to flash the stock ROM but I can't access it anyway.
Cheers.
Click to expand...
Click to collapse
Check whether you are trying to install a downgraded firmware. It will not allow you to downgrade your firmware.

Ok I solved it. I flashed TWRP using odin and it worked and then the phone rebooted into TWRP and showed an error ( which I couldn't read because it was too fast) and then booted into a fully working android (The ROM I was trying to flash). The phone is now 100% working. Thanks for the help anyway.

Actually this issue happen from latest 10 FW, I always flash custom recovery or root to solve it.

Help Unbricking S3

I have bricked my S3 before and have successfully unbricked it. This time is very much unlike the last, however. To start with, I don't know what caused the brick. My S3 has been working perfectly on rooted stock firmware for several months. The day it bricked, I was using it normally and hit the power button for it to go to sleep. 3 hours later I noticed I hadn't heard any notifications and I found that my phone wasn't turning on. So for starters, I don't even know what caused my phone to become bricked.
Anywho, I located the unbrick img, booted into Linux, and flashed the image to an SD card. Popped that into the S3 and....nothing. After some searching I found there was a specific unbrick img for the new bootloader that came with the KK updates. After flashing that image to the SD and popping it in the S3 I was greeted with the "Boot Recovery Mode" which appears to transfer to Odin Mode just fine.
I open Odin 3.07 and tried flashing the factory reset tar for NJ2 and I get this:
Code:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
So I found 2 different PIT files for my Sprint Galaxy S3 16GB. Both give me this error:
Code:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried this in Odin 3.09 and even 1.85 just to see if any of that would magically work. Nope. I saw several users report that rebooting the phone/PC would get the PIT to flash but nothing on that front either. So I'm guessing that means the PIT files are bad but I find that a little difficult to believe. I also noticed that Odin 1.85 reports the device as "Android+SLP" and not an S3. I also read about the S3 having a problem with its eMMC and that it would need to be shipped away for motherboard surgery. So I'm prepared to call the time of death on this phone but I figured I would give one last ditch attempt by presenting my situation to the genius collective of XDA. Any suggestions?

* N910AUCS2EQF1 * Full 4-File Odin 6.0.1 Firmware *

Hello!
Here is the full N910AUCS2EQF1 Odin manual update to 6.0.1 for everyone to enjoy. You can flash from any current version you have now it doesn't matter whether you are on 4.4.4, 5.1.1 or 6.0.1.
https://www.androidfilehost.com/?fid=745425885120746376
If for whatever reason you want to downgrade or don't like this build, you can safely downgrade to any of the below versions without any issues. After you flash a lower android version using Odin, phone might get stuck on AT&T logo. If that happens, all you need to do is boot into recovery and do a factory wipe/reset and phone will boot right up after that. Make sure you backup your data when upgrading or downgrading firmware so you don't loose any information..
N910AUCS2EQE1 (6.0.1) - https://www.androidfilehost.com/?fid=745425885120742009
N910AUCS2EPK4 (6.0.1) - https://www.androidfilehost.com/?fid=673368273298964563
N910AUCU2EPH5 (6.0.1) - https://www.androidfilehost.com/?fid=24651430732238073
N910AUCU2DOI2 (5.1.1) - https://www.androidfilehost.com/?fid=24438995911970946

Thanks. Will give it a try later.

Great job!
Does the Odin update wipe the phone?

Thanks for sharing this. I'm a few updates behind, so I presume this will be faster than installing multiple OTAs to get up to date.
Can someone recommend a safe download location for Odin? Some of the sites that come up in Google look a little shady. Thanks.

erm, which files go where? i get an error no matter where i put any file.

hello guys, anybody know how to backup full data if the phone dont have root ??

Flashing the firmware from Odin keeps failing.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
It's happened this way 3 times thus far. I'm assuming it's an issue with the BL? I don't know...Could be very wrong. But it keeps failing.

help
Phone gets stuck at the logo even after full wipe

D3ATHSTALK3R said:
Phone gets stuck at the logo even after full wipe
Click to expand...
Click to collapse
for how long?

toutanje said:
Hello!
Here is the full N910AUCS2EQF1 Odin manual update to 6.0.1 for everyone to enjoy. You can flash from any current version you have now it doesn't matter whether you are on 4.4.4, 5.1.1 or 6.0.1.
If for whatever reason you want to downgrade or don't like this build, you can safely downgrade to any of the below versions without any issues. After you flash a lower android version using Odin, phone might get stuck on AT&T logo. If that happens, all you need to do is boot into recovery and do a factory wipe/reset and phone will boot right up after that. Make sure you backup your data when upgrading or downgrading firmware so you don't loose any information..
Click to expand...
Click to collapse
Tried this repeatedly now. fails every time. cant get past system. tried different cables, different usb ports. fails every time. every 3rd boot gets me an mmc_read_failed. I am on QF1 already, and was trying to correct a corrupted over the air install. anyone able to help?
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
<ID:0/007> FAIL! (Write)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse

Hello all, anyone successfully used this to upgrade their phone... from the above, it looks like not the case... thanks!

ridgemagnet said:
Hello all, anyone successfully used this to upgrade their phone... from the above, it looks like not the case... thanks!
Click to expand...
Click to collapse
Yea, it worked perfectly fine for me.

Thx, where is N910AUCS2EQG1?

Gxzn said:
Yea, it worked perfectly fine for me.
Click to expand...
Click to collapse
which file did you use?

Thanks. I use this to updgrade an old phone that still had the Marshmallow beta on it.

Can someone repost the download link for N910AUCS2EQF1 I tried downloading it I've been getting really slow speeds and it stops during the download

no matter what mine just fails every time. Is there anything we can do?

F3AR420 said:
no matter what mine just fails every time. Is there anything we can do?
Click to expand...
Click to collapse
Are you still having trouble with this?

Did anyone successfully rooted sm-n910a with 6.0.1 ? if so, how?

Worked for me.
Loaded AP files first then the other 3 files after all at once.
Upgraded to 6.01 from 5.01 . I was surprised at how easy the process was as I have no knowledge on this subject.

Samsung T320 Bootloop / ODIN Help

Hope someone can assist here, feel like I have tried everything, and cannot get the issue resolved. Have spent 10+ hours, but many of the resources are outdated, or the links are no longer valid for downloads - understandable since a 6 year old device.
Took out my T320 after a while, and figured I would use it, turns out still on KitKat, so not much you can do with it. Figured I'd root, then flash Colt or Lineage on the Tab Pro.
Root was successful, TWRP recovery was successful as well, but then the flash was not working and caused a bootloop issue. Long story short, I am only able to get into Download mode, and unable to flash the stock US firmware, because I cannot find a working link anywhere.
ODIN allows me to flash BL, but get the error below when I select a tar to flash in the AP. Hope someone knows what the export below could point to as to why I cannot flash Lineage or Colt.
First part is for the BL - which is successful, second one is the ROM, which is a fail.
Nutshell -
Bootloop but able to get into Download mode
Cannot access Recovery
Kies does not recognize but ODIN does
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> PK
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

@xcobrax81 as you don't have the firmware yet try samfirm_reborn tool.
Search for it, doesn't have to be installed.
I guess you can take the canadian version, but I'm not sure as I live in Europe.
Get rid of Kies IMO it causes to much problems, just use Samsungs USB device drivers instead. That's what I do and it works fine.
Don't understand which ROM you were trying to flash with Odin as you said you don't have stock firmware.
Any custom ROM can only be flashed via TWRP.
Btw, which one did you try?
On my T325 I use 3.4.0-0.

bmwdroid said:
@xcobrax81 as you don't have the firmware yet try samfirm_reborn tool.
Search for it, doesn't have to be installed.
I guess you can take the canadian version, but I'm not sure as I live in Europe.
Get rid of Kies IMO it causes to much problems, just use Samsungs USB device drivers instead. That's what I do and it works fine.
Don't understand which ROM you were trying to flash with Odin as you said you don't have stock firmware.
Any custom ROM can only be flashed via TWRP.
Btw, which one did you try?
On my T325 I use 3.4.0-0.
Click to expand...
Click to collapse
Thanks for the guidance, I'll try that this week. Tried Colt and Lucid (the top 2 I found on this forum)
But I think it's more me than any issues with the ROMs