Hello!
Here is the full N910AUCS2EQF1 Odin manual update to 6.0.1 for everyone to enjoy. You can flash from any current version you have now it doesn't matter whether you are on 4.4.4, 5.1.1 or 6.0.1.
https://www.androidfilehost.com/?fid=745425885120746376
If for whatever reason you want to downgrade or don't like this build, you can safely downgrade to any of the below versions without any issues. After you flash a lower android version using Odin, phone might get stuck on AT&T logo. If that happens, all you need to do is boot into recovery and do a factory wipe/reset and phone will boot right up after that. Make sure you backup your data when upgrading or downgrading firmware so you don't loose any information..
N910AUCS2EQE1 (6.0.1) - https://www.androidfilehost.com/?fid=745425885120742009
N910AUCS2EPK4 (6.0.1) - https://www.androidfilehost.com/?fid=673368273298964563
N910AUCU2EPH5 (6.0.1) - https://www.androidfilehost.com/?fid=24651430732238073
N910AUCU2DOI2 (5.1.1) - https://www.androidfilehost.com/?fid=24438995911970946
Thanks. Will give it a try later.
Great job!
Does the Odin update wipe the phone?
Thanks for sharing this. I'm a few updates behind, so I presume this will be faster than installing multiple OTAs to get up to date.
Can someone recommend a safe download location for Odin? Some of the sites that come up in Google look a little shady. Thanks.
erm, which files go where? i get an error no matter where i put any file.
hello guys, anybody know how to backup full data if the phone dont have root ??
Flashing the firmware from Odin keeps failing.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
It's happened this way 3 times thus far. I'm assuming it's an issue with the BL? I don't know...Could be very wrong. But it keeps failing.
help
Phone gets stuck at the logo even after full wipe
D3ATHSTALK3R said:
Phone gets stuck at the logo even after full wipe
Click to expand...
Click to collapse
for how long?
toutanje said:
Hello!
Here is the full N910AUCS2EQF1 Odin manual update to 6.0.1 for everyone to enjoy. You can flash from any current version you have now it doesn't matter whether you are on 4.4.4, 5.1.1 or 6.0.1.
If for whatever reason you want to downgrade or don't like this build, you can safely downgrade to any of the below versions without any issues. After you flash a lower android version using Odin, phone might get stuck on AT&T logo. If that happens, all you need to do is boot into recovery and do a factory wipe/reset and phone will boot right up after that. Make sure you backup your data when upgrading or downgrading firmware so you don't loose any information..
Click to expand...
Click to collapse
Tried this repeatedly now. fails every time. cant get past system. tried different cables, different usb ports. fails every time. every 3rd boot gets me an mmc_read_failed. I am on QF1 already, and was trying to correct a corrupted over the air install. anyone able to help?
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
<ID:0/007> FAIL! (Write)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Hello all, anyone successfully used this to upgrade their phone... from the above, it looks like not the case... thanks!
ridgemagnet said:
Hello all, anyone successfully used this to upgrade their phone... from the above, it looks like not the case... thanks!
Click to expand...
Click to collapse
Yea, it worked perfectly fine for me.
Thx, where is N910AUCS2EQG1?
Gxzn said:
Yea, it worked perfectly fine for me.
Click to expand...
Click to collapse
which file did you use?
Thanks. I use this to updgrade an old phone that still had the Marshmallow beta on it.
Can someone repost the download link for N910AUCS2EQF1 I tried downloading it I've been getting really slow speeds and it stops during the download
no matter what mine just fails every time. Is there anything we can do?
F3AR420 said:
no matter what mine just fails every time. Is there anything we can do?
Click to expand...
Click to collapse
Are you still having trouble with this?
Did anyone successfully rooted sm-n910a with 6.0.1 ? if so, how?
Worked for me.
Loaded AP files first then the other 3 files after all at once.
Upgraded to 6.01 from 5.01 . I was surprised at how easy the process was as I have no knowledge on this subject.
Related
im trying to restore my phone back to full factory (removing root,recovery) everything back to stock and i got the samsung image and im getting fail on odin what can i do?
crimedave1987 said:
im trying to restore my phone back to full factory (removing root,recovery) everything back to stock and i got the samsung image and im getting fail on odin what can i do?
Click to expand...
Click to collapse
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
as what i remember when i brought my phone over 2 months ago i think i have the latest FW and i had to flash a zip to downgrade the SW VER.
and rooted now i just went to DOWNLOADING MODE and tried flashing the stock rom and i got whats above i cant get to to recovery or nothing
nevermind its fixed (cable issue)
crimedave1987 said:
nevermind its fixed (cable issue)
Click to expand...
Click to collapse
Just came across your thread.
Thanks for posting your solution.
Yes, the usb cord can be, and is often the culprit.
No doubt reading this thread will help others that find themselves in a similar situation
I've been searching the forums for 3 hours and it's gotten me nowhere.
I am trying to unroot my Note 4. Here are system specs and what I've tried:
Device Model: SM-N910P
PAC version: LP Beta-1 Nightly
Android Version: 5.0.2
Baseband version: N910PVPU2BOE1
I have tried to unroot with BOB7 using both Odin 3.07 and 3.09. Both times I get the error message on ODIN:
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
And on the phone:
sw rev check fail : [aboot]fused 2 > binary 1
[1] eMMC write fail: ABOOT
I have tried rerooting then using Odin to the same result. I am currently downloading ANIE to try that.
I have also tried swearing loudly, promised to throw virgins into a volcano to whatever deity will listen, promised my phone sexual favors and/or savage beatings, and I've consumed some whiskey.
What am I doing wrong?
U have to use a oe1 tar file and use odin you cant oding back to bob7 now that u have oe1 once u odin backto stock oel then you will be root less be careful that tar with most likely wipe internal info make sure u do a backup
Sent from my SM-N910P using Tapatalk
That's all I was missing?
OK, thanks!
Now where do I get an oe1?
JQuinnC said:
That's all I was missing?
OK, thanks!
Now where do I get an oe1?
Click to expand...
Click to collapse
The latest is OJ6. You can find it here :
http://forum.xda-developers.com/showthread.php?t=3250864
JQuinnC said:
That's all I was missing?
OK, thanks!
Now where do I get an oe1?
Click to expand...
Click to collapse
Use OJ6 tar (latest☺). You'll find it in Sprint Note 4 general forum.
Backup what you want to keep, wipe everything but extSdCard. Delete the Android folder on extSdCard. Power down and pull battery for at least 30 seconds before going to download mode. Use latest Odin with defaults, let it boot and run the setup wizard.
Sent from my SM-N910P using Tapatalk
I was trying to root my phone using the "Sprint Method" and couldn't get the Sprint or Verizon firmware to flash correctly
I was getting this error
Code:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> xbl.elf
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I had USB Debugging and OEM Unlocking enabled (Tried with OEM Unlocking disabled also)
Now the phone won't boot at all. I have tried to Factory reset it and get no errors BUT I'm stuck at the Boot logo forever (left it for ~2 hours)
I don't know if it matters but since the phone doesn't boot anymore so I cant enable OEM Unlocking again
Sorry if i'm being an idiot i'm new to this
Blake__ said:
I was trying to root my phone using the "Sprint Method" and couldn't get the Sprint or Verizon firmware to flash correctly
I was getting this error
Code:
Added!!
Odin engine v(ID:3.1203)..
File analysis..
SetupConnection..
Initialzation..
Set PIT file..
DO NOT TURN OFF TARGET!!
Get PIT for mapping..
Firmware update start..
SingleDownload.
emmc_appsboot.mbn
lksecapp.mbn
xbl.elf
FAIL! (Auth)
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
I had USB Debugging and OEM Unlocking enabled (Tried with OEM Unlocking disabled also)
Now the phone won't boot at all. I have tried to Factory reset it and get no errors BUT I'm stuck at the Boot logo forever (left it for ~2 hours)
I don't know if it matters but since the phone doesn't boot anymore so I cant enable OEM Unlocking again
Sorry if i'm being an idiot i'm new to this
Click to expand...
Click to collapse
as you found....this doesnt work anymore...hasnt worked in months. do you guys not read anything ever before just flashing stuff lol?
you should be able to boot into download mode and flash the stock firmware to get your device working again at least
Sent from my SM-N930W8 using Tapatalk 2
force70 said:
as you found....this doesnt work anymore...hasnt worked in months. do you guys not read anything ever before just flashing stuff lol?
you should be able to boot into download mode and flash the stock firmware to get your device working again at least
Sent from my SM-N930W8 using Tapatalk 2
Click to expand...
Click to collapse
All the tutorials I found and all the youtube videos never said this doesnt work...
Tried flashing stock firmware, It gives the same error. Maybe I have the wrong firmware or something? Can you give a link to the current firmware?
Blake__ said:
All the tutorials I found and all the youtube videos never said this doesnt work...
Tried flashing stock firmware, It gives the same error. Maybe I have the wrong firmware or something? Can you give a link to the current firmware?
Click to expand...
Click to collapse
trust me you dont want the current firmware unless you like only charging to 60% lol!
if you have a CAN model like mine you want the PI3 firmware..
force70 said:
trust me you dont want the current firmware unless you like only charging to 60% lol!
if you have a CAN model like mine you want the PI3 firmware..
Click to expand...
Click to collapse
I managed to flash the original firmware using the Verizon software recovery thing. During first boot I was also able to skip/cancel updates so now my note is running without any limits and updates disabled via Package Disabler
Hello,
I rooted my Samsung A520F with this HadesRom / Guide Klick
Everything worked fine but the only thing is, that my sim card is not recognised. I think the problem is the wrong bootloader.
Here are some Information:
Pic1
Pic2
From the Hadesrom I have the software of a A530F now.
Or is there another problem ?
Thanks in advance for you help!
StrohhutKevin
Did you update modem and bootloader to Oreo?
You need to do this if you came from N firmware or above
Baseminge said:
Did you update modem and bootloader to Oreo?
You need to do this if you came from N firmware or above
Click to expand...
Click to collapse
Thanks for the quick answer.
Ok. I think the problem is the bootloader.
I flashed the BL and CP from here for the A520F.
Flashing the CP was no problem, but when I want to flash the BL I get an Error in Odin:
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and in the Download Window on the phone it says:
SW REV. CHECK FAIL(BOOTLOADER) DEVICE: 8, BINARY: 4
I googled for that error message but I don't find the right solution. Maybe I understand it wrong.
Edit.: I found out that I already have the newest BL. The problem is that this version is further secured by Samsung. Here is a Guide how to get over this but I have no desire to do that so I flashed everything back to normal.
Thanks anyway @Baseminge
StrohhutKevin
StrohhutKevin said:
Thanks anyway @Baseminge[/B]
StrohhutKevin
Click to expand...
Click to collapse
Not at all man
StrohhutKevin said:
Thanks for the quick answer.
Ok. I think the problem is the bootloader.
I flashed the BL and CP from here for the A520F.
Flashing the CP was no problem, but when I want to flash the BL I get an Error in Odin:
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and in the Download Window on the phone it says:
SW REV. CHECK FAIL(BOOTLOADER) DEVICE: 8, BINARY: 4
I googled for that error message but I don't find the right solution. Maybe I understand it wrong.
Edit.: I found out that I already have the newest BL. The problem is that this version is further secured by Samsung. Here is a Guide how to get over this but I have no desire to do that so I flashed everything back to normal.
Thanks anyway @Baseminge
StrohhutKevin
Click to expand...
Click to collapse
Hello brother how did you flashed everything back to normal ?
Can you please share the links for getting back to normal
I am also stuck on custom ROM without sim cards
I have tried everything but couldn't get back to stock ROM
H
kaustubh99 said:
Hello brother how did you flashed everything back to normal ?
Can you please share the links for getting back to normal
I am also stuck on custom ROM without sim cards
I have tried everything but couldn't get back to stock ROM
Click to expand...
Click to collapse
I found the original stock on this page
"This forum does not allow me to post an outside link because I'm a new. Maybe you can Google for updato com"
Problem is that the phone is still "rooted". But that didn't bother me in any way. Everything is just fine like before.
Hope this helps. I'm not at home so if you stuck in some point write again.
StohhutKevin
StrohhutKevin said:
H
I found the original stock on this page
"This forum does not allow me to post an outside link because I'm a new. Maybe you can Google for updato com"
Problem is that the phone is still "rooted". But that didn't bother me in any way. Everything is just fine like before.
Hope this helps. I'm not at home so if you stuck in some point write again.
StohhutKevin
Click to expand...
Click to collapse
Thanks bro I am back to normal
Only few Samsung features won't work but that's fine
Hello, I was just wondering if anyone can help me fix this problem, anyways, I bought the phone it was on Android 9 Pie, I got the notification for software update, the phone was working fine, the owner said to me that there was a motherboard issue which I neglect and I'm fully sure that it's a software problem with the latest update, anyways, I downloaded and installed the update and when it finished It started going in nonstop bootloop, I tried flashing the device with the latest firmware, the Carier ID is: INS(INDIA), however when I try to flash the phone the Odin shows me this:
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5716 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone also says SW REV CHECK FAIL (Bootloader) Device 7, Binary: 6 after failed ODIN flashing
I know the error is saying to me that I'm trying to DOWN-grade the phone but it's the latest official firmware for the phone, i tried also flashing it with on BL and AP in Odin and Z3x tools, however when I try to flash it in Z3X tool and when I insert only AP and BL the loading on the phone goes to the middle, and sometimes Z3X tool shows that the flashing is done but it's still in a Bootloop.
Honestly I'm desperate for the help, any kind of help will be appreciated, if someone knows how to help and needs fruther information, feel free to ask.
Thanks in advance!
Also I cannot enter to Recovery Mode the phone either goes to Download Mode or constant bootloop
Well, i think the phone has the wrong CSC or something else.
I was seeing the SW REV CHECK FAIL part and it seems like that the phone's binary is U7, but firmware is U6, meaning that the phone has a different CSC.
If it's possible, flash another firmware with a different CSC, but with U7.
And tell if it works.
Do you have any link to U7 firmware I tried flashing with like 10 combinations, none of them worked, I was searching for U7 firmware but i couldn't find it, I haven't slept for 3 days trying to fix it, or if you can tell me how can I recognize the file combination has the U7 firmware, I think there's a some trick in reading the symobols in combination files but I don't know, thanks for replying!