Hope someone can assist here, feel like I have tried everything, and cannot get the issue resolved. Have spent 10+ hours, but many of the resources are outdated, or the links are no longer valid for downloads - understandable since a 6 year old device.
Took out my T320 after a while, and figured I would use it, turns out still on KitKat, so not much you can do with it. Figured I'd root, then flash Colt or Lineage on the Tab Pro.
Root was successful, TWRP recovery was successful as well, but then the flash was not working and caused a bootloop issue. Long story short, I am only able to get into Download mode, and unable to flash the stock US firmware, because I cannot find a working link anywhere.
ODIN allows me to flash BL, but get the error below when I select a tar to flash in the AP. Hope someone knows what the export below could point to as to why I cannot flash Lineage or Colt.
First part is for the BL - which is successful, second one is the ROM, which is a fail.
Nutshell -
Bootloop but able to get into Download mode
Cannot access Recovery
Kies does not recognize but ODIN does
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> PK
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
@xcobrax81 as you don't have the firmware yet try samfirm_reborn tool.
Search for it, doesn't have to be installed.
I guess you can take the canadian version, but I'm not sure as I live in Europe.
Get rid of Kies IMO it causes to much problems, just use Samsungs USB device drivers instead. That's what I do and it works fine.
Don't understand which ROM you were trying to flash with Odin as you said you don't have stock firmware.
Any custom ROM can only be flashed via TWRP.
Btw, which one did you try?
On my T325 I use 3.4.0-0.
bmwdroid said:
@xcobrax81 as you don't have the firmware yet try samfirm_reborn tool.
Search for it, doesn't have to be installed.
I guess you can take the canadian version, but I'm not sure as I live in Europe.
Get rid of Kies IMO it causes to much problems, just use Samsungs USB device drivers instead. That's what I do and it works fine.
Don't understand which ROM you were trying to flash with Odin as you said you don't have stock firmware.
Any custom ROM can only be flashed via TWRP.
Btw, which one did you try?
On my T325 I use 3.4.0-0.
Click to expand...
Click to collapse
Thanks for the guidance, I'll try that this week. Tried Colt and Lucid (the top 2 I found on this forum)
But I think it's more me than any issues with the ROMs
Related
Please be gentle; I'm new.
See the following:
THIS IS WHAT I GOT WHEN I FLASHED THE STOCK KERNEL<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
THIS IS WHAT I GET EVERY FREAKIN TIME I TRY TO GO BACK TO STOCK USING
SPH-D700-DG27-8Gb-REL.tar<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> param.lfs
<ID:0/005> Sbl.bin
<ID:0/005> boot.bin
<ID:0/005> recovery.bin
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I don't know what to do anymore :-( I'm at a loss. I've read all the posts; I've read all the tricks; and nada. I can't even access the recovery module in my phone. The only thing I can access is the download screen (1 + power button). The (volume down + camera + power button) stopped working. All I get when I press the power button is the Samsung Logo and that's it. I've changed usb ports, I've restarted the computer and phone, I've tried using different odin versions and in different windows settings (ie XP SP 2, Admin etc).
Is there anyone out there who can help me save a $100 bucks?
Thanks
-CNT
FYI: I use to have the Viperrom Trinity v3.0.3 and even the ViperROM [TRiNiTY v2.0] EXT4-RFS Dual DK28 4.0.4 at one point. <sigh>
This is a question, so it should go int the q&a section, not development.
As long as you can get into download mode you should still be able to recover the phone.
I think there's an official sprint updater somewhere you can try using instead of ODIN that might help...
You might try a different computer. Install the Galaxy S drivers, and use Odin there...
Moved to Q&A.
I would try Odin'ing to EB13 prerooted with CWM3 so you can put on any ROM after that from the link here:
http://forum.xda-developers.com/showthread.php?t=853209
Use the second one down for CWM3.
im trying to restore my phone back to full factory (removing root,recovery) everything back to stock and i got the samsung image and im getting fail on odin what can i do?
crimedave1987 said:
im trying to restore my phone back to full factory (removing root,recovery) everything back to stock and i got the samsung image and im getting fail on odin what can i do?
Click to expand...
Click to collapse
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
as what i remember when i brought my phone over 2 months ago i think i have the latest FW and i had to flash a zip to downgrade the SW VER.
and rooted now i just went to DOWNLOADING MODE and tried flashing the stock rom and i got whats above i cant get to to recovery or nothing
nevermind its fixed (cable issue)
crimedave1987 said:
nevermind its fixed (cable issue)
Click to expand...
Click to collapse
Just came across your thread.
Thanks for posting your solution.
Yes, the usb cord can be, and is often the culprit.
No doubt reading this thread will help others that find themselves in a similar situation
Hello, I'm a Noob to phone recovery and I think I've bitten off more than I can chew.
So I usually use a T mobile Galaxy S II but I wanted to upgrade to a Note II. My Flash -addicted friend gave me one that he believed he had "Bricked" beyond repair, but after reading around the forums I found that where there is Odin there is a way, I said I would try to recover it.
Well I'm not getting anywhere:crying: . on the Note II it shows:
ODIN MODE
PRODUCT NAME:
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
And on Odin 3.7 I keep getting:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I rebooted and retried and I got:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping...
and it hung there for the better par of the day.
I have a pit file I got from http://forum.xda-developers.com/showthread.php?t=2071403 and I have used multiple roms. I have tried clicking and unclicking re partition. I Have only Odin Mode, no recovery, and when I boot it on, it does not move pass the Samsung Galaxy Note II screen; no Android,no anything. I am also working on a Windows 7 Home Edition Laptop. I have a totally unrooted , straight from T mo Galaxy 2 that works perfectly at hand I can use to "copy" (It's my roommates) but I just needs some direction as to how.
Again , I am new to this and I apologize if this is a duplication. If there are answers in other forums, please link them here for me please. Thanks for all the time and direction in advance!
Cheshire_Ci86 said:
Hello, I'm a Noob to phone recovery and I think I've bitten off more than I can chew.
So I usually use a T mobile Galaxy S II but I wanted to upgrade to a Note II. My Flash -addicted friend gave me one that he believed he had "Bricked" beyond repair, but after reading around the forums I found that where there is Odin there is a way, I said I would try to recover it.
Well I'm not getting anywhere:crying: . on the Note II it shows:
ODIN MODE
PRODUCT NAME:
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
And on Odin 3.7 I keep getting:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I rebooted and retried and I got:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping...
and it hung there for the better par of the day.
I have a pit file I got from http://forum.xda-developers.com/showthread.php?t=2071403 and I have used multiple roms. I have tried clicking and unclicking re partition. I Have only Odin Mode, no recovery, and when I boot it on, it does not move pass the Samsung Galaxy Note II screen; no Android,no anything. I am also working on a Windows 7 Home Edition Laptop. I have a totally unrooted , straight from T mo Galaxy 2 that works perfectly at hand I can use to "copy" (It's my roommates) but I just needs some direction as to how.
Again , I am new to this and I apologize if this is a duplication. If there are answers in other forums, please link them here for me please. Thanks for all the time and direction in advance!
Click to expand...
Click to collapse
did u ever get the pit file?
I don't know if it matters or not, but I think you should use Odin ver.1.85.
If I'm wrong, somebody please correct me.
Sent from my SGH-T889 using xda premium
okay so i have 5 files that came with a stock gs3 i747 recovery folder, and im trying to place them in odin to fix my soft bricked phone. the files start with...
AP
BL
CP
CSC
D2.pit
i know where d2, csc, and bl go on odin, but im not sure about the other 2... please help someone :/
Is the bootloader from the recovery older than the bootloader on your phone? IMHO, confirm the bootloader version on the phone before attempting to flash.
Attempting to downgrade a 4.3 bootloader or flashing an incompatible mode/bootloader combination could brick your phone.
Are the files in a tar.md5 format? Think this is the only format that Odin will recognize.
audit13 said:
Is the bootloader from the recovery older than the bootloader on your phone? IMHO, confirm the bootloader version on the phone before attempting to flash.
Attempting to downgrade a 4.3 bootloader or flashing an incompatible mode/bootloader combination could brick your phone.
Are the files in a tar.md5 format? Think this is the only format that Odin will recognize.
Click to expand...
Click to collapse
im not 99 percent sure of the current bootloader on the phone right now, but my closest guess would be the bootloader from the I747UCUEMJB package i downloaded cause i used this package in the past to fix my phone which was soft bricked like it is now. oh and i figured out where to place everything on odin, but when i start it ends up failing.. heres the text im getting.
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
Looks like you are trying to downgrade the bootloader.
so i loaded the recovery from the folder in odin, and now my phone was on the att logo screen for at least 3 mins, then i went through setup and its saying theres an application preventing wifi from working.
What boot loader and modem are on your phone?
"UPDATE" i booted the phone in safe mode to check if there was an app blocking my wifi from turning on, and it still didnt work. so that means i need to reinstall my 4.3 firmware right?
I think you need a modem to match your bootloader.
Hello everyone.
Recently I flashed the Note4Mini Rom available here in the forum. I really like it. Only had a couple of minor issues, however it had a huge issue for me: I couldn't play Hearthstone with it.
So I decided to flash back to the Stock Rom. I downloaded the Portuguese version for my Smartphone (SM-N7505), since I am Portuguese, but when I try to flash it via Odin this is my log file.
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> modem.bin
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And I get the error saying that there was a problem flashing the software and to connect to kies and do the phone recovery thingy. That doesn't work. Kies does not detect the phone (Yes, I installed the drivers and tried both Kies2 and Kies3 and I'm running everything as admin)
Any help will be appreciated I kinda need the phone. I also had it rooted and TWRP installed. I don't know if I still have it after trying to flash the stock ROM but I can't access it anyway.
Cheers.
Quaekk said:
Hello everyone.
Recently I flashed the Note4Mini Rom available here in the forum. I really like it. Only had a couple of minor issues, however it had a huge issue for me: I couldn't play Hearthstone with it.
So I decided to flash back to the Stock Rom. I downloaded the Portuguese version for my Smartphone (SM-N7505), since I am Portuguese, but when I try to flash it via Odin this is my log file.
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> modem.bin
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And I get the error saying that there was a problem flashing the software and to connect to kies and do the phone recovery thingy. That doesn't work. Kies does not detect the phone (Yes, I installed the drivers and tried both Kies2 and Kies3 and I'm running everything as admin)
Any help will be appreciated I kinda need the phone. I also had it rooted and TWRP installed. I don't know if I still have it after trying to flash the stock ROM but I can't access it anyway.
Cheers.
Click to expand...
Click to collapse
Check whether you are trying to install a downgraded firmware. It will not allow you to downgrade your firmware.
Ok I solved it. I flashed TWRP using odin and it worked and then the phone rebooted into TWRP and showed an error ( which I couldn't read because it was too fast) and then booted into a fully working android (The ROM I was trying to flash). The phone is now 100% working. Thanks for the help anyway.
Actually this issue happen from latest 10 FW, I always flash custom recovery or root to solve it.