Develop Bugs

[Q] A Desire in strange condition

So, I've tried using a mod cooked by a online kitchen (cookmyrom se) and now I have a Desire in a very strange condition -
1. It has cyanogen mode, but without the Market application.
2. It has a terminal emulator.
3. It has clockworkmod, but I can't make it download the recovery thingy that actually makes it useful (even though I have both wifi and 3g, checked using the browser).
4. ADB on windows doesn't recognize the device. I updated it (last time I rooted the device was a lot of time to go).
5. The device is rooted (I managed to run terminal commands as root - su, etc).
6. Any time I try to put a Mod as update.zip it gives me an error about the signing (I tried official mods too :S).
7. Current version: 2.2
Baseband version: 32.42.00.32U_5.09.00.08
Kernel version: 2.6.34.5-cyanogenmodandroid giulio-laptop#7
HBOOT: 0.80.0000
Radio: 5.09.00.08
So , now all I want is to get some kind of control back - at the least the ability to dump a new mod. Any Desire expert can piece up the puzzle I created and help me?

1 Flash gapps
2 It should have
3 Your confusing rom manager and CWM. If you are rooted CWM should be on the phone when you manually boot in to recovery.
4 Either driver issues or adb isn't enabled on the phone.
5 Great
6 Turn of signature verification (in recovery go to install zip from sd, there is the option)
If you want to flash new rom:
Put a rom on the sd
Boot in to recovery (without rom manager)
Wipe data/factory reset and cache
Install zip from sd
Reboot recovery

First of all, thanks for helping. Unfortunately, I understood maybe half of what you wrote
1. I googled it and it seems that I still need a facility to flash stuff, which I don't have since I can't install CWM recovery.
2. I am. I have rom manager installed, but I can't flash Clockworkmod using rom manager. It says "Error while downloading from server. Please make sure that you have a stable internet connection (I have) and that your sd card is inserted and has enough space (inserted and has >1GB of free space)"
I don't understand what do you mean by
"If you are rooted CWM should be on the phone when you manually boot in to recovery."
I think I am rooted. As I said, I have root privileges and as I said, when I boot into recovery I only have 4 options (reboot, apply sdcard:update.zip, wipe data/factory reset, wipe cache partition).
4. I have both drivers and newest adb. I have all development options, including debugging on the phone (this is what you meant right?) enabled. I can try reinstalling everything.
6. Again - I don't have this option.

Bump. Still no solution, and I tried every unlocker method out there. Please help.

[Q] Stuck on bootscreen

Hey, My phone was working fine till yesterday. N when i tried to flash dk froyo .i had to change the kernel and i guess the bootscreen(htc logo) freezed because of that. I tried flashing hcdr and other kernels and even changed rom back to cm 7.But nothing seems to help.Only cwm is working on my phone. CAn someone help me please

btw its a wildfire

Your best bet Is to try run a ruu as that would reset the phone back to stock, bootloader and kernal, but depending on how you s-offed you may lose the ability to root.( untill you s-off again.) Good luck
sent from my steroid powered, cyanogenmod filled wrecking machine! using xda app.

Perform a full wipe (In CWM, Select "Data Wipe / Factory Reset", then, staying in CWM, go to Mounts and Storage, Select "Format /system". After this, flash a ROM (any) and check if it boots.

Tried. Its still not working. Can any1 post a nandroid backup file of any rom for wildfire. Please. I formatted my sd card too by mistake.

and while flashing a ruu. it always shows a error E:Failure at line 65 and something. Its different everytime

Connect your Wildfire to your PC, In CWM, Go to Mounts and Storage, and Select "Mount USB Storage". This will activate Mass Storage Mode and you can access your SDCard on your PC as normal. (I don't think anyone would upload a Nandroid backup of his own, it contains personal stuff like contacts and all. But, if someone does, good for you)

i mount usb storage n then do wat..? i tried flashing every rom possible. But its still not working. Is it the kernel's problem or what??

I am pretty certain performing a full wipe (Following options in CWM - 1: Data Wipe - Factory Reset, along with 2: Wipe Cache Partition, 3: Format /cache, 4: Format /system, 5: Format /data, 6: Wipe cache partition, 7: Wipe Dalvik Cache) in CWM and flashing a fresh ROM will fix your issue, UNLESS your phone is not bricked due to bad flash, but since you already claim that you have done that, I can't help you any further on this.
EDIT - Also one more thing - When you flash the kernel / ROM, do you get a confirmation message "Installation Complete"? What is your CWM version?

Yes i do.it says installation comple and its v3.0.0.6

Sense ROM's like DK will not work on CWM versions above 2.x.x.x. Anyway, since you tried CM7 already, One last suggestion in that case would be to try flashing the RUU via the bootloader.
Steps -
1: Download the RUU you want to install
2: Extract the rom.zip from the RUU. Procedure here
3: Once you have that rom.zip, Rename it to PC49IMG.zip
4: Transfer this to the root of your SDCard (i.e. - Not in any folders / sub-folders)
5: Restart device in HBoot Mode (Press Vol Down + Power simultaneously)
6: It will scan for the file, and ask to install. Follow On-Screen instructions.

Ill give it a try.

owe you big time man..Thanx a lot..

Return of the Jedi, Yoda is the man.
" once its gone,its GONE."

stuck at htc logo
cRo77y said:
Hey, My phone was working fine till yesterday. N when i tried to flash dk froyo .i had to change the kernel and i guess the bootscreen(htc logo) freezed because of that. I tried flashing hcdr and other kernels and even changed rom back to cm 7.But nothing seems to help.Only cwm is working on my phone. CAn someone help me please
Click to expand...
Click to collapse
search for syed zain ahmed on utube and see his video.. i cant post a link to the video coz i am new , after 10 post i will be able to post the link ... it helped me alot.. do try that method.

syed_786 said:
search for syed zain ahmed on utube and see his video.. i cant post a link to the video coz i am new , after 10 post i will be able to post the link ... it helped me alot.. do try that method.
Click to expand...
Click to collapse
Are you him by any chance?
Sent from my locked, tampered ville

wow, this is quite the thread revival, 2011 was ages ago....

help
Help?
or can anyone help me when I tried to install Custom MTD Partitions I'm stuck whit htc screen all to me erase what to do now when I want to install a new room again stuck please help I already tried all I do not have nor restore any deleted by mistake help

[Q] Soft-bricked One-V?

I seem to have soft-bricked my one-v and could really use some pointers.
The things I did to get the phone bricked:
- Unlock the bootloader
- Try to flash miui.
Since this attempt the phone only boots until the "quietly brilliant" screen appears (with a red "This build is for development purposes only..." warning, but I guess this just indicates the bootloader is unlocked right?)
Since then I have installed ClockWorkMod recovery image. This seems to work, I can get in recovery mode and do things like install specific zip files from sdcard.
Unfortunately whatever ROM I try to flash the result is the same: boot until the quietly brilliant screen and then nothing.
For instance, I tried to flash shpongle_primou_20130521.zip (the One-V is the GSM version) using the following steps:
- Download the above zip file
- Extract boot.img
- Copy the above zip file to sdcard using another phone (cannot boot with the one-v so I cannot use it to write to sdcard)
- Put the sdcard back into the One-V
- Start the phone in fastboot mode and connect to USB
- use fastboot to flash boot.img (flashboot flash boot boot.img)
- Switch to recovery mode
- Use ClockWorkMod to flash the zip file
- Reboot the phone
Result: hang in quietly brilliant screen. If I just let the phone alone it seems to reboot every 5 minutes or so.
I fear that I am doing something stupid due to a lack of understanding of some basic concept. Can you guys give me some pointers on how to proceed to unbrick the phone?

it seems u have not flashed the correct kernel for shpongle (the boot img inside zip doesnt work)
try this kernel (ONLY FOR SHPONGLE) http://www.mediafire.com/download/vj8vv8hjyhzg3xv/boot-HELLBOY-42-201305202359.img
Also do factory reset from recovery everytime u flash a rom( u can backup data via titanium backup)

Also, your command command should be fastboot flash boot boot.img.
Sent from my HTC One V using xda app-developers app

Awesome, I got SHPONGLE to work. Installing the correct boot.img and clearing all data did the trick.
Now I can try to install miui again but I have a stable situation (and backup ) to work with.
Thanks a lot!

I have the same issue with my HTC one V but it is the virgin mobile version ( I live in the east coast of U.S.A.)
Will I be able to use the same solution?
which is the right ROM and Kernel for me?

[Q] HELP E977 can't access Storage

[SOLVED] I've founded a flashable zip with the Stock rom. Flashed it, but still stucked on boot logo. Then i flashed BAM rom again and that's it!
The .zip file fixed all the firmware issues, but the system couldn't boot (maybe cus my phone is an e977 an the .zip is for e975) so i just instaled another ROM
Here is the zip for fixing IMEI, phone signal, accelerometer, wifi, bluetoth or (maybe) any other issue that may happen! (In case someone, somewhere, some time need it)
http://forum.xda-developers.com/showthread.php?t=2407489
U just need to backup your stuff (apps, music, photos...) install the zip, then install your favorite custom rom again and restore your stuff!
Hey guys. First of all, forgive me for any spelling mistakes, i'm Brazilian.
I've been passing thru a lot of problems with my E977 in the last few days. I've accidentaly formated the firmware in CWM (that was stupid, i know). After that, i've lost my connection signal, wifi, bluetooth and also the acelerometer.
Flashed a ZIP with the correct modem and the conections came back! But i just couldn't make the acelerometer work again(tried 5 diferent ROMs, including stock)
So, i came back to Stock by flashing the correct .KDZ but then i've got stuck on LG's Boot Logo.
Then i used the "teenyBin" and after google's boot logo the screen just turned off (???).
So i flashed latest CWM and from there i flashed BAM nightly ROM (TWRP was giving me an error) and now i can boot. BUT LOST THE CONECTIONS AGAIN!!!! And the acelerometer still not working.
I was trying to flash the modem .zip again, so i can at least use my cellphone, but then i discovered that my USB Storage also doesnt work. (Device is detected, but windows can't acces storage)
Opened the file manager and it gave me an error saying that the folder couldn't be found.
Gone in to settings and changed to root properties. After that i could open the file manager and noticed that the /sdcard folder is missing! And there is nothing under the folder "storage/emulated"
After that i tried to push the file with ADB, but it gave me a permition error.
Tried to push in recovery then, but ADB cant conect with my phone when it is using CWM recovery, only TWRP
So, i need to fix the internal storage issue AND the acelerometer issue.
I also have tried to flash KDZ again, but now LG's software can't conect with the phone (i think it's cus i removed the stock recovery).
Please somebody help me, i've been trying to fix this **** for the last 3 days!!!!!
[EDIT] Came back to TWRP and flashed the modem .zip thru sideload. No results. It's not the same problem as before
[EDIT²] I've lost my IMEI. What now?

Oh no! Your problem is the biggest problem I ever seen on xda.I think LG support is last option.

[Q] Failed to flash ROM, SGW doesn't boot

Hi everybody,
sorry for bothering you, but I think I might need some help.
I tried to flash ParanoidAndroid (first try ever to flash a smartphone) but failed 'somehow'.
Initial steps to create the problem
Initial Status: Gingerbread on a Galaxy W; Pretty old and pretty messed up
Download the update.zip to root the smartphone => Becoming root worked!
Download ParanoidAndroid
Download Clockwork Recovery
Created backups using Titanium Backup as root.
Copied ParanoidAndroid to the GalaxyWs internal sd card (yes, this was my mistake)
Wipe cach partition => It said, it worked, I don't know if it did
Rebooted phone => all fine
Rebooted into recovery mode applied update from SD-Card=> Selected ParanoidAndroid.zip => ErrorMessage (I think it was something like file corrupt, sorry I'm not sure about the specific words, but it sounded like this is no updatefile or this file is not a valid zip file.
Status of the problem
Bootup shows Samsung Logo
Bootup than shows GalaxyW-Screen Logo
Bootup than shows the android recovery symbol OR directly reboots
When trying to open the recovery menu, every second time I get the message "Updating (...) Installing MultiCSC... Can't access /system/csc/DBT/system"
If opening recovery menu works, I can only acces the internal storage of the galaxy to install an update (tried the paranoidandroid several times, it doesn't work)
When plugging in the galaxy w to my USB port, I don't get an USB storage shown on my 2 laptops (1 "Windows 7", 1 "Ubuntu 14.0?" )
neither odin (4.43) nor Heimdall are able to flash any files.
So, simple question, what can I do next?
-I cannot copy clockworkmod to my smartphone
-I don't know if I can easily overwrite the kernel or the bootloader.
I searched the forum but didn't find a clear solution, so sorry if this special configuration was already asked.
Thanks for your help and best regards
FrankyDroid

FrankyDroid said:
[*]Rebooted into recovery mode applied update from SD-Card=> Selected ParanoidAndroid.zip => ErrorMessage (I think it was something like file corrupt, sorry I'm not sure about the specific words, but it sounded like this is no updatefile or this file is not a valid zip file.
Click to expand...
Click to collapse
Your ROM's download has been cut either by a connection issue or by you, That is why I always have a backup rom in my SD Card. Also For kitkat, make sure you got CWM 6.0.4.5 or higher. Personally i use PhilZ Touch Recovery. It is simple enough for me. And odin recognizes your phone only in download mode. So make sure you go to download mode then plug the phone in. And also make sure while working with odin, unplug all USBs and other phones

Hey MayB4ck,
thank you for the tips, I finally got it running Using Philz Touch Recovery. Works like hell
Best regards
FrankyDroid