Develop Bugs

System partition, Internal SDcard issue?

Hello.
I am writing here as i am hoping that one of You experienced android users will be able to help me to fix my phone (i8150).
I am rather new to android and so far i have been following instructions very carefully and it wasn't the very first time i was flashing rom.
I did rooted my phone, flashed CWM Recovery via adb, used titanium backup, root explorer etc. Also its been long time since i started using Kezra V4 rom with ICS theme, unmodified vold.fstb. I never ever had any issues with the phone or rom.
To make things as clear as possible i will start with the brief info on what i did to my phone last week.
Last weekend (a week ago) i did a fresh install of Kezra v4 rom with ics theme, original vold.fstab, root explorer and launcher pro (placed in system/app).
Flashing process went fine, no errors in CWM (and yes i did wipe dalvik, cache, formatted system). Several apps were restored with titanium. Phone and rom were working as intended, no signs of slowdowns, errors etc.
Couple days latter i decided to add 1 ringtone and 1 notification sound. Both are ogg files and were placed to system/media/audio/ringtones and notifications. I did remember to mount as r/w change permissions and remount it as r/o. I rebooted phone once but i didn't see new ringtone or notification sound on the list so i rebooted it again. After second reboot the phone booted without any problems but once the system was loaded touch screen stopped to respond and the phone froze. I rebooted it again and this time everything went back to normal.
Yesterday i tried to copy new Kezra rom to my INTERNAL sdcar in order to flash it with CWM. But instead of that i stumbled upon a problem that is beyond my knowledge and comprehension. I DID NOT FLASH ANYTHING AT THIS POINT AS I LOST ACCESS TO CWM
- CWM Recovery disappeared - when i am trying to boot to CWM my phone turns off. There is very very very quick flash of the screen showing recovery but that is it.
- when copying 270mb rom to INTERNAL sdcard it stops at 10% with message that the file can not be read
- when copying smaller files, files are being copied from pc to phone but once the phone (usb storage) is disconnected from pc the files that were copied to internal sdcard are not there as if they were never copied
- i can copy files from external sdcard to internal sdcard with rootexplorer but after rebooting phone the files are gone from internal sdcard
- i can install any app from market or from sdcard but after rebooting, the installed app is gone, it doesnt exist in data/app, the cache files on internal sdcard are gone as well and the installed app is not on the list
- i can take pictures and if they are saved to internal sdcard they vanish after rebooting phone
- if i change any settings of the phone (volume, brightness, wifi settings, any settings) after rebooting phone the settings that i changed are reverted to the state from before rebooting
- i did try to delete those 2 files - ringtone and notification sound from the system/media/audio/ringtones and notification but after rebooting the phone they are still there not deleted (i do remember abot mounting r/w r/o and permissions)
- after formatting internal usb storage (settings/storage/format usb) and rebooting phone all the files are there - as if it was not formatted at all
- after formatting internal usb storage from pc and rebooting phone all the files are there - as if it was not formatted at all
- after "factory reset data" and rebooting phone nothing has changed as if it has not been reseted
- i tried to update superuser binary (my binary is 3.0.3) via wifi - there is new ver 3.0.3.2(ok), update(ok), downloading(ok),
gaining root(ok),remounting /system as rw (ok), md5sum(ok), changing file mode to 06755(ok), moving su (ok), checking md5sum(ok),
remounting /system as ro(ok), installed ver 3.0.3, update failed - superuser message -> "this updater cannot update the su binary on phones that have some kind of write protection on the system partition like S-ON"
Now i guess you are wondering if the phone works. Yes it does.
- it is eu phone bought in England and used in England
- the phone is not assigned to a network carrier, it is not locked in any way - network lock (off), network subset lock (off), SP lock (off), CP lock (off)
- I can make/receive calls and messages
- wifi, g3, tethering, bluetooth, gps, camera etc. are working fine
- all the applications including new apps are working fine as long as i don't reboot phone.
- I don't experience any slowdowns, crashes or freezes
- I have access to system files via root explorer, the phone is rooted
- i don't get any messages that file system is write protected
- rumdump works
- download mode works
Here is what i tried so far:
- flash CWM Recovery via adb but after rebooting i still have no access to recovery (no errors in adb - process completed)
- flash original stock recovery via adb but after rebooting i still have no access to recovery (no errors in adb - process completed)
- flash CWM Recovery via ODIN but after reboot i can not boot to CWM
- flash stock rom I8150XXKK1 via ODIN - no changes to rom. Phone is loadin the old rom
ODIN Explanation:
In both cases of flashin CWM and stock rom i followed the procedure step by step with and without automatic reboot. ODIN says that flashing is done and PASS. During automatic reboot phone doesnt reboot it only turns off. After manual reboot phone is loading old rom (Kezra V4 installed a week ago) and there is no sign of CWM.
So now i am wondering:
- is it software or hardware issue
- how can i identify and isolate the problem
- how to make the phone to save the changes after reboot
- how to get a working CWM Recovery so i can flash the phone
- How to make ODIN to flash the phone
What do You make out this?

Man.....I am so sorry.
I have never seen such a well documented OP...
Congrats on that first!!
I really am at a loss as to what to suggest, as you have covered so many bases yourself.
Just to me, looking again at your post, I don't really think those .ogg files have anything to do with it.
It seems your problems originated with flashing the Kezra Custom ROM.
To lose your Recovery Partition must mean some data corruption introduced by the flashing process.
I know you have flashed stock with ODIN, this was One Package??
I am not sure, but I think there may be Stock ROM which has seperate files.......???
It is just a suggestion, perhaps someone else may know.....
At least this will bump your post!!!
All I can say further is best of luck....hope it can be solved.
Also, there also is return for repair to Sammy.....as we say in Ireland.... Play the eejit!!
Sent from my SGW GT-I8150 using Tapatalk!!

Thanks Irish for taking your time to reply.
Well... yes i did my best to make the post as much descriptive as possible due to the nature of the issue itself.
When it comes to ODIN it was one file only. I didn't try with multiple files.
I don't think that ogg files itself are the source of all that mess. On the other hand i wouldn't blame Kezra rom.
As you noticed i tried to track down the time and place when it happend and how it all started.
It may be a coincidence but i suspect that "ogg glitch" (keep in mind that was the very first fail reboot and system crash of my phony since i bought it) has something to do with it. Why? All the settings, apps etc. in the phone are as they were set on Wednesday 28.03 including Alarm set to 8:00am. Same day "ogg glitch" occurred. Betwene Wednesday and Now no flashing has been done except all the mentioned steps (failed) that i have taken in order to restore my phone. Every time i reboot the phone, all the setting, apps etc. are being reverted to the state from before "ogg glitch"
Another thing is the message given by superuser while trying to update su binary. "Some kind of write protection like S-ON". (at this point i didn't have time to do a in depth search on "S-ON")
Now... i am not an expert but it makes me wonder... is it?
- internal phone memory (the chip itself) is corrupted or damaged
- the file system of internal memory is corupted
- system partition is corupted
- there is an issue with root access and permissions
- while copying ogg files to /system/... i made a mistake at some point and set wrong mount rw/ro and wrong permissions
- is such thing as "recovery loop" possible - after every each reboot the phone is "restored" to the state from before "ogg glitch"
When it comes to return to Samsung... The phone is not only working but is rooted, has a custom rom... She is not a VIRGIN mate.

Sorry, I didn't mean to say that Kezra's ROM is at fault......phew...nearly got into trouble there.
I meant that during the flash of the ROM, there may have been an event, loss of power??? which has caused corruption of the Partition system on your phone??
I know there is no locked Bootloader on our phone, which is what s-on indicates....usually HTC phones have/had this....hence problems with flashing Custom ROM's Recovery......
Somehow, your phone has got into a state which mimics locked bootloader, has to be corruption, IMO.
If you can locate ODIN files to flash separately, maybe will work, but I'm not sure..
As for returning to Samsung......
there is a thread here somewhere, Rio Saputro, where Sammy has accepted phones with boot-loops back for repair, due to hardware issues, so I am not sure haw much checking they do!!!

I can still access download mode but i think i wont be able to flash anything.
ODIN MODE
PRODUCT NAME: GTI8150
CUSTOM BINARY DOWNLOAD: NO
CURRENT KERNEL: UNKNOWN !!
Irish would You be so kind and compare that info with your downlod mode please?
Otherwise i think i will have to return my W to Samsung.
Cheers

jbs.sc said:
I can still access download mode but i think i wont be able to flash anything.
ODIN MODE
PRODUCT NAME: GTI8150
CUSTOM BINARY DOWNLOAD: NO
CURRENT KERNEL: UNKNOWN !!
Irish would You be so kind and compare that info with your downlod mode please?
Otherwise i think i will have to return my W to Samsung.
Cheers
Click to expand...
Click to collapse
Don't worry, your phone is not bricked.. Just download the Asian firmware from the development thread (it will have multiple files inside the package) and flash it through Odin (look for flashing process for multiple file package), you will be good to go.
Sent from my Novo704FC-E2 using Tapatalk

I have already tried multi part asian firmware provided by THE-E.
Same thing as with one file firmware.
With auto reboot phone just turns off and doesn't turn on.
Without auto reboot... well it just stays on and that's it.
After manual reboot i am back to the old rom.
I am using odin 4.43
Should i try other versions?
I do have factory gurantee on my phone till 2013 and if they won't accept it...
oh well s*** happens... not for the first nor the last time in my life. There is no fun of modding without a risk.

jbs.sc said:
I can still access download mode but i think i wont be able to flash anything.
ODIN MODE
PRODUCT NAME: GTI8150
CUSTOM BINARY DOWNLOAD: NO
CURRENT KERNEL: UNKNOWN !!
Irish would You be so kind and compare that info with your downlod mode please?
Otherwise i think i will have to return my W to Samsung.
Cheers
Click to expand...
Click to collapse
Hi friend.....
Not sure what your current state of play is, but my download mode was exactly as you have quoted above.
see this from last Christmas,
when I was in despair.....symptoms very similar to what you have now, after failed ODIN flash....I had no recovery and my phone would not boot, just download mode, as you have above.
However, I solved it pretty easily, after modifying my ODIN settings.
Unfortunately THE-E's instructions said "unmark Auto Reboot"......which is not correct.....
this meant the Flash never completed.......
See here for my celebratory post, much relieved...
This was very much like your recent experience.
I think there may be some hope/help for you there!!!!
Let me know......bast of luck......

Irish,
I did try with auto reboot marked. When ODIN starts the procedure of auto reboot the phone turns off but it doesn't turn on. ODIN waits for the phone till the flashing is completed and says PASS but the phone stays turned off anyway.
Btw. Perhaps i should use KIES to try to update and brick my phone.
I would have a valid reason to claim warranty

jbs.sc said:
Irish,
I did try with auto reboot marked. When ODIN starts the procedure of auto reboot the phone turns off but it doesn't turn on. ODIN waits for the phone till the flashing is completed and says PASS but the phone stays turned off anyway.
Btw. Perhaps i should use KIES to try to update and brick my phone.
I would have a valid reason to claim warranty
Click to expand...
Click to collapse
OK.....I think that was my last shot......I am out of ideas!!!
Maybe post screen shot of ODIN procedure if you can??
I can't remember how my phone reacted after PASS and Reboot, but that doesn't sound right.......
Can you post the ODIN Message output.....just so ppl can compare and perhaps help.

OK i tried to flash it again just to take screenshots. And again same thing.

OK.....just have a look at my thread here.......
which is a pdf of the Service manual I "procured"
There is something there about ODIN, which Samsung use as well....
I just noticed a little thing when using multiple files.....
they have also set the " Reset Time = 300" for their Flash.......
P.21....or [6 Level 1 Repair]........
the pdf files are a little out of sequence!!!!
Also, try flash without SD or SIM card inserted.....

Irish,
Just to let you know. I did what you suggested.
Flashing with timer, without sim card and without external memory did't help.
As far as i remember someone had similar problem, unfortunately solution was never found.
I think when it comes to ODIN i run out of options.
Thanks for all the help and assistance.

OK......out of suggestions here!!
It is just such a pity.....
download mode normally means "no brick-can flash"
Sorry we could not fix.....next move?? Sammy??
Best of luck anyway!!
Sent from my SGW GT-I8150 using Tapatalk!!

Did you try to flash only boot img? Not sure if that's possible but it looks like your boot is messed up.
Sent from my GT-I8150 using Tapatalk 2 Beta-5

I dont think it makes any difference what am i flashing.
Whether it is software or hardware problem it prevents phone from auto rebooting (and applying any changes made during flashing process)
Not only during ODIN auto reboot but also from download mode reboot (once in download mode you can press volume down button to reboot phone)

Just thinking if you try to do it part by part and not whole firmware in 1 go. But if you manage reflash image boot hope you should by fine

[Q] MIUI Rom gone wrong

okay so heres what happened.
I have an international htc one x that is indeed rooted with no roms installed.
I did create a back up and then tried to install the MIUI rom (but I dont really know where that is on my phone. I know I made one with rom manager. I dont have any backups on my computer though)
It worked, however, it didnt have wifi or data signals so i went back to try again.
I opened my bootloader screen. For the record, it is unlocked and hboot is version 1.73 if that helps.
I wiped cashe/data/delvic everything and even factory reset and installed the MIUI RD rom now hoping it would have a difference.
The darn thing got stuck on the MIUI bootloader for hours.
I did the same thing again a few times, sometimes in different orders and then it passed on and another screen came saying 'starting apps'. That got stuck for hours too.
Now I don't have any other roms on my phone, just the MIUI RD. The original miui just vanished too, i dont see it anymore. Also, when I put my USB wire to the phone and connect it to the pc, I cant transfer newer files into it. So this is all I have access to on my phone apparently.
I tried flashing a boot.img and a couple kernels but no luck. I've been trying to do this for all day and this is my first time so I don't know much about it.
I've been googling and somethings say to open cmd and type but i keep getting 'fastboot is not recognized as an internal or external command'
Currently, its not stuck at either the MIUI screen or the Starting Apps. but just the HTC logo screen and not going past.
I don't really want to install any new roms considering i've worked really hard to get this to work and I really want it now more so.
How do i fix this? I want to use this rom.

flash philz recovery (http://forum.xda-developers.com/showthread.php?t=2240646), usb mounting should work on that, then:
steps to install ROM
1. bootloader version should be 1.3x
2. copy ROM to SD Card
3. copy boot.img INCLUDED in the ROM zip to fastboot folder
4. flash the boot.img in fastboot
5. in recovery, wipe system/data/cache/everything
6. flash rom
7. restart

but how exactly do i put it on my phone? my computer isnt detecting my phone when i connect it? im sorry im not exactly an expert on this.

Go to recovery - mounts and storage - hook up the usb cable - tap the last option in the mounts and storage list and wait a few minutes. It won't be mounted instantly

ok i flashed the philtz recovery but when i flash the boot.img it says:
Finding update package
Opening update package
Installing update
installation aborted
for reference: http://forum.xda-developers.com/showthread.php?t=1957490
thats the rom i used and i flashed the boot.img flasher thats right above the download link
edit: also i tried just flashing the rom again and im still stuck on the HTC screen.
its not even going to the miui screen or starting apps anymore. :[

Boot.img must be flashed via fastboot. Not via recovery !

ok, i looked up how to fastboot, downloaded sdk files and i moved the boot.img into the fastboot folder and i opened command prompt there and wrote fastboot flash boot boot.img but i keep getting:
'fastboot is not recognized as an internal or external command'
what did i miss?
EDIT: ok, so the fastboot folder i got from the page didnt work so i used a different fastboot folder, dragged the .boot there and now it worked! finally passed the screen and wifi is connecting!
thank you!

Good, thanks to @tomascus. He summed it up real nice
Cheers

[Q] Failed to flash ROM, SGW doesn't boot

Hi everybody,
sorry for bothering you, but I think I might need some help.
I tried to flash ParanoidAndroid (first try ever to flash a smartphone) but failed 'somehow'.
Initial steps to create the problem
Initial Status: Gingerbread on a Galaxy W; Pretty old and pretty messed up
Download the update.zip to root the smartphone => Becoming root worked!
Download ParanoidAndroid
Download Clockwork Recovery
Created backups using Titanium Backup as root.
Copied ParanoidAndroid to the GalaxyWs internal sd card (yes, this was my mistake)
Wipe cach partition => It said, it worked, I don't know if it did
Rebooted phone => all fine
Rebooted into recovery mode applied update from SD-Card=> Selected ParanoidAndroid.zip => ErrorMessage (I think it was something like file corrupt, sorry I'm not sure about the specific words, but it sounded like this is no updatefile or this file is not a valid zip file.
Status of the problem
Bootup shows Samsung Logo
Bootup than shows GalaxyW-Screen Logo
Bootup than shows the android recovery symbol OR directly reboots
When trying to open the recovery menu, every second time I get the message "Updating (...) Installing MultiCSC... Can't access /system/csc/DBT/system"
If opening recovery menu works, I can only acces the internal storage of the galaxy to install an update (tried the paranoidandroid several times, it doesn't work)
When plugging in the galaxy w to my USB port, I don't get an USB storage shown on my 2 laptops (1 "Windows 7", 1 "Ubuntu 14.0?" )
neither odin (4.43) nor Heimdall are able to flash any files.
So, simple question, what can I do next?
-I cannot copy clockworkmod to my smartphone
-I don't know if I can easily overwrite the kernel or the bootloader.
I searched the forum but didn't find a clear solution, so sorry if this special configuration was already asked.
Thanks for your help and best regards
FrankyDroid

FrankyDroid said:
[*]Rebooted into recovery mode applied update from SD-Card=> Selected ParanoidAndroid.zip => ErrorMessage (I think it was something like file corrupt, sorry I'm not sure about the specific words, but it sounded like this is no updatefile or this file is not a valid zip file.
Click to expand...
Click to collapse
Your ROM's download has been cut either by a connection issue or by you, That is why I always have a backup rom in my SD Card. Also For kitkat, make sure you got CWM 6.0.4.5 or higher. Personally i use PhilZ Touch Recovery. It is simple enough for me. And odin recognizes your phone only in download mode. So make sure you go to download mode then plug the phone in. And also make sure while working with odin, unplug all USBs and other phones

Hey MayB4ck,
thank you for the tips, I finally got it running Using Philz Touch Recovery. Works like hell
Best regards
FrankyDroid

Device not detected

Hello everybody,
Here my problem :
I tried to install a custom rom, I failed. Now, my smartphone stay on the Asus logo screen. I tried to follow this - http://forum.xda-developers.com/zenfone2/general/guide-to-apply-ota-bootloop-rooted-zf2-t3127835 - to fix the problem, but when I connect phone and laptop, adb doesn't find the device.
If I continue and go in recovery mode (using TWRP), laptop can access the phone (I can see internal memory but not external).
And if I try the ADB sideload, there is no device again...
It's the first step, I don't see any other way to unbrick the phone...
Thanks in advance

http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256 be lucky your phone is recognized

Hello,
Frist, thank you for your answer. I had already tried this way but nothing. Finally, I fixed the problems (detect phone and unbrick phone).
1-In TWRP, I loaded recovery.img, boot.img and droidboot.img. Reboot in recovery mod, but I had the dead droid... so I pushed on power and volume up till I have a new screen.
2-In this part, I did a Wipe/Factory reset (useless I think), reboot in recovery mode (still dead droid). This time I selected the line "update with adb" (with an ASUS firmware). Then I had a message who told me update adb sideload. I did it and it installed the firmware. The smartphone reboot correctly.
Now, I have the same problem I had yesterday. In TWRP, my external storage isn't detected...

you use stock recovery or custom recovery, if you use stock recovery external-storage won't detected

Hello,
Thank you Bar4, I explained above how I fixed my problems. Now I'm searching a way to make TWRP (TWRP 3.0) detect my external storage to install Cyanogenmod 13.0. If it's really not possible, I would try with CWM (I have seen it in your screen).
Edit : I guess custom, TWRP. It's why I don't understand why it doesn't allow me to mount SD card or doesn't detect this same SD Card.

Mara Udé said:
Hello,
Thank you Bar4, I explained above how I fixed my problems. Now I'm searching a way to make TWRP (TWRP 3.0) detect my external storage to install Cyanogenmod 13.0. If it's really not possible, I would try with CWM (I have seen it in your screen).
Click to expand...
Click to collapse
i use twrp 3.0 too, but external sd detected. no need to put on external storage, you can flash Cm 13 through internal storage
if you want to install custom rom it's better if you make a backup first, so if happen you failed when installing new rom or maybe you don't like it (new rom) you can go back to stock rom through TWRP restore

Ok, failed again...

Try a different rom or redownload the rom it might have been a bad download.
The error message says there is no updater script in the zip meaning it can't install anything as the updater script tells what directories to install the files if I seen it correctly that is.
Sent from my ASUS_Z00AD using Tapatalk

Mara Udé said:
Ok, failed again...
Click to expand...
Click to collapse
maybe the CM 13 zip file you have download corrupted, try to re-download and re-flash it again. if still failed try another rom
( i'm using AICP Rom "based on CM 13 too") try it, it's awesome Rom ---> do clean install wipe all except internal storage and external storage
http://forum.xda-developers.com/zenfone2/development/rom-c-p-t3285951/post64645756#post64645756
http://opengapps.org/ ( select x86-6.0-nano )

Hi,
Sorry for this late answer. As I failed to install those roms (CM13, Bliss), I'm going to stop here and wait for the Marsmallow update. But I'm happy my phone isn't brik anymore.
Thank you all.

Oneplus 3 can't boot into OxygenOS after deleting file

Hey,
I wanted to create an nandroid backup in TWRP and got error 255 in the process.
I got the log of the failed update:
cloud.directupload.net/dfZq
So i searched for a solution, and the internet said that i should remove the file wich causes backup to fail. The logs said it was '/system/app/AndroidPay'
This is a file, not a folder.
So i removed the file, keeping an backup of it, booted into TWRP and the backup still failed.
To my surprise the boot into OxygenOS fails now. It shows the Oneplus Powerd by Android logo, turns black and reboots into twrp. Recovery and Bootloader seems to work fine.
So I connected my device with my computer and tried to get the file back to '/system/app' using adb.
I tried 'adb push AndroidPay /system/app' and it seems to be transferred succesfully, however the boot into oxygenOS is still not working.
I think it can be fixed by formatting the device and flash OxygenOS new to it, but I really don't wanna do that.
General Information:
Oneplus 3
OxygenOS 3.3.4
Rooted
Xposed Installed
No custom kernal
TWRP 3.0.2-0
File wich may be broken: cloud.directupload.net/dfZs
Is there an easyer way than resetting my whole phone to get it to work ?
I'm sorry for language mistakes or maybe leaving relevant information.
Thank you for help

I've had same problem today, my solution is restore "System" part (only system) from old backup, it saved my data and OP3 works fine after that

Wipe system, then flash OOS and it should work fine. If it doesn't Im afraid you need to do a full clean install since it isn't system related then.