Develop Bugs

[Solved] Bricked HTC ONE X (S720e) : Help Needed

Having Htc one x s720e ,Vendor: O2 UK, Last Version Was:1.29.206.11
Unlocked boot-loader Via HTC-Dev
flashed clockwork-touch-5.8.4.0-endeavoru.img
than From the recovery menu, performed a full wipe, as follows:
Selected Wipe Data or Factory Reset, and click Yes to confirm.
Selected Wipe Dalvik Cache
Selected Mounts and Storage, then selected Format /system and confirmed.
Than
Downloaded the following files:
HOX_4.2.zip (md5sum: 263be5dd54791b7c9d896505f094bc8d)
Slim_Common.zip (md5sum: a113d2d7bf326e64e79f427089154b33)
Flashed with Zip..
everything goes fine...
but cant boot the phone...
its in blinking mode.....HTC quality brilliant....
than .......
tried official RUU method..but getting error :cant update
any help....

crazy_kamal said:
Having Htc one x s720e ,Vendor: O2 UK, Last Version Was:1.29.206.11
Unlocked boot-loader Via HTC-Dev
flashed clockwork-touch-5.8.4.0-endeavoru.img
than From the recovery menu, performed a full wipe, as follows:
Selected Wipe Data or Factory Reset, and click Yes to confirm.
Selected Wipe Dalvik Cache
Selected Mounts and Storage, then selected Format /system and confirmed.
Than
Downloaded the following files:
HOX_4.2.zip (md5sum: 263be5dd54791b7c9d896505f094bc8d)
Slim_Common.zip (md5sum: a113d2d7bf326e64e79f427089154b33)
Flashed with Zip..
everything goes fine...
but cant boot the phone...
its in blinking mode.....HTC quality brilliant....
than .......
tried official RUU method..but getting error :cant update
any help....
Click to expand...
Click to collapse
You can relock the phone and flash the ruu. it wont work with an unlocked bootloader. The easiest method is to download the right RUU file for you phone. Check that by-
Enter fastboot on phone.
Open cmd on PC
-fastboot oem readcid
then you need to flash stock boot.img Search the forum, stock boot.img are all over here and place it in the fastboot directory.
-fastboot flash boot boot.img
and then relock bootloader.
-fastboot oem lock
make sure you download the right RUU for your CID.
Once you have it flash it.
hope this helps
Drew071

thanks a lot bro.....
solved phone with minor changes.....
1. fullwiped from recovery
2. erase cache in fastboot
3. flashed boot.img found in rom zip file
4. installed rom from recovery

no probs. If you face any problems in the future follow this thread for a comprehensive guide on what to do next.
http://forum.xda-developers.com/showthread.php?t=1660807
drew071
---------- Post added at 03:49 PM ---------- Previous post was at 03:27 PM ----------
just a heads up put [solved] in the header.
drew071

Help please
drew071 said:
no probs. If you face any problems in the future follow this thread for a comprehensive guide on what to do next.
http://forum.xda-developers.com/showthread.php?t=1660807
drew071
---------- Post added at 03:49 PM ---------- Previous post was at 03:27 PM ----------
just a heads up put [solved] in the header.
drew071
Click to expand...
Click to collapse
I know I'm a bit late to this, but I'm having a similar problem. Trouble is I can't find the right RUU version. Only found the 1.26 version, I need the 1.29.206.11. Can anyone help me in finding this, or alternatively if there is a stock restore I can have?
Currently running RD MIUI, Rooted, with CWM recovery. Microphone has stopped working and I need to send it back to O2 but want to get back to vanilla before I do.
Only part i'm stuck at is getting the stock ROM back, starting to get a little desperate!

drew071 said:
no probs. If you face any problems in the future follow this thread for a comprehensive guide on what to do next.
http://forum.xda-developers.com/showthread.php?t=1660807
drew071
---------- Post added at 03:49 PM ---------- Previous post was at 03:27 PM ----------
just a heads up put [solved] in the header.
drew071
Click to expand...
Click to collapse
Bro need little help from u........:angel:.
i tried to go back to stock rom...
everything u desribed, i follow n ok...
but getting this error: Error [140]: Bootloader version error
My CID : O2___001
Tried RUU :RUU_ENDEAVOR_U_ICS_40_O2_UK_1.26.206.2_Radio_1.1204.90.13_release_251230_signed
FULL INFO OF MY PHONE:
INFOversion: 0.5a
INFOversion-bootloader: 0.96.0000
INFOversion-baseband: 1.1204.90.13
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.29.206.11
INFOserialno: HTXXXXXXXX
INFOimei: 35XXXXXXXXXXX
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: None
INFObattery-status: good
INFObattery-voltage: 3841mV
INFOdevpower: 57
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!

[Q] hd stuck on boot screen,rooted but s-on

hi i hope someone can help my htc desire hd is s-on and bootloader locked but cant insall any roms this is the info on my phone its also rooted
c:\james>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 2.00.0029
INFOversion-baseband: 26.14.04.28_M
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 3.13.0.0
INFOserialno: SH11ARXxxxxx
INFOimei: 352668047339989
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9810000
INFOcidnum: HTC__001
INFObattery-status: good
INFObattery-voltage: 4182mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: fcef1579
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
finished. total time: 0.010s
i hope some one can tell me the correct ruu from shiped roms i have tried severall also the phone is rooted but cant install custom roms it has clockwork recovery v5.8.1.5 but wont let me install anything that way either
thanks for your help jimmy

You're S-On, bootloader locked, and rooted? Unlock your bootloader and fastboot flash a recovery. Root alone won't let you flash ROMs.

Nlo
bananagranola said:
You're S-On, bootloader locked, and rooted? Unlock your bootloader and fastboot flash a recovery. Root alone won't let you flash ROMs.
Click to expand...
Click to collapse
Thanks bananagranola can u tell me which one pls tried flashing ruu before with bootloaer unlocked

Not a RUU, a recovery.

bananagranola said:
Posting nonsense to get ten posts and posting in a language other than English are both not allowed.
Click to expand...
Click to collapse
Thank u for your warning，i got it.:fingers-crossed:
---------- Post added at 02:29 PM ---------- Previous post was at 02:17 PM ----------
bananagranola said:
Posting nonsense to get ten posts and posting in a language other than English are both not allowed.
Click to expand...
Click to collapse
By the way，can i enroll the registeredname is Chinese? I worried about this.:crying:

王强_Sir said:
By the way，can i enroll the registeredname is Chinese? I worried about this.:crying:
Click to expand...
Click to collapse
I believe you can. Just don't post without a translation.

Thread has been cleaned.
Please note all posts must be in English.

Hi can you tell me where to download the recovery tks

jimmymac1 said:
Hi can you tell me where to download the recovery tks
Click to expand...
Click to collapse
Google for clockworkmod. It should be the top result. Find the one for DHD. My finding it for you will take as much effort as your finding it yourself. This is a forum where you are expected to search and read for yourself; no one will hold your hand.

hi bananagranola ive done all that when i install roms it just keeps going back to htc white logo screen i installed this recovery-clockwork-2.5.1.2-ace-modaco-r2.img and then a rom

If you are not S-Off you need to fastboot flash the ROM zip's boot.img.

bananagranola said:
If you are not S-Off you need to fastboot flash the ROM zip's boot.img.
Click to expand...
Click to collapse
thank you mate you are diamond

If it helps boot into hboot then fastboot
Make sure you have the drivers installed
Connect phone and make sure it says fastboot usb
from the directory that contains adb, fastboot etc copy the recovery.img to it and run a cmd prompt
fastboot flash recovery recovery.img.
Reboot phone into recovery and you should have cwm or 4ext whatever recovery.img you used.
If you are s-on and want to use custom roms you'll have to unlock boot with htdev and manually fastboot flash the roms boot.img after installing the rom with the recovery you're using.
Stu

[Q] One X relocked with no rom on

Its been a while since flashing roms and I was going to sell my one x but needed stock software and unrooting. But I have ended up with my phone stuck in fast boot with it saying re locked at the top. I think i know where I went wrong but its too late. I dont have any backup because it was ages ago and I have tried various stock roms all returning errors. This is what I was following:
"fastboot oem Lock"
2) "fastboot oem rebootRUU"
3) "fastboot flash zip firmware.zip"
4) "fastboot reboot-bootloader"
5) "fastboot flash "unlocktoken Unlocktoken.bin"
6 "fastboot flash recovery openrecovery-twrp-2.6.3.0-4.18.401.2-endeavoru-JB.img
7) fastboot flash boot ( the boot.img from the custom rom)
8) go in to recovery and install the custom rom.
I got stuck at 6 giving me an error, I presume it was the wrong file.
Do I actually have to do fastboot oem Lock, because its relocked?
Could anybody help me out with what stock roms and file I need please? I know there are a lot of posts but each one is idividual and with different firmware.
Thanks Guys
This is some of my info:
c:\fastboot>fastboot getvar all
INFOversion: 0.5a
INFOversion-bootloader: 1.39.0000
INFOversion-baseband: 5.1204.164.30H
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.14.771.34
INFOserialno: ***********************
INFOimei: ********************
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: H3G__001
INFObattery-status: good
INFObattery-voltage: 3759mV
INFOdevpower: 27
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
Will it unlock if I send a new unlock ticket through htc dev website?

si_d_2003 said:
Its been a while since flashing roms and I was going to sell my one x but needed stock software and unrooting. But I have ended up with my phone stuck in fast boot with it saying re locked at the top. I think i know where I went wrong but its too late. I dont have any backup because it was ages ago and I have tried various stock roms all returning errors. This is what I was following:
"fastboot oem Lock"
2) "fastboot oem rebootRUU"
3) "fastboot flash zip firmware.zip"
4) "fastboot reboot-bootloader"
5) "fastboot flash "unlocktoken Unlocktoken.bin"
6 "fastboot flash recovery openrecovery-twrp-2.6.3.0-4.18.401.2-endeavoru-JB.img
7) fastboot flash boot ( the boot.img from the custom rom)
8) go in to recovery and install the custom rom.
I got stuck at 6 giving me an error, I presume it was the wrong file.
Do I actually have to do fastboot oem Lock, because its relocked?
Could anybody help me out with what stock roms and file I need please? I know there are a lot of posts but each one is idividual and with different firmware.
Thanks Guys
This is some of my info:
c:\fastboot>fastboot getvar all
INFOversion: 0.5a
INFOversion-bootloader: 1.39.0000
INFOversion-baseband: 5.1204.164.30H
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.14.771.34
INFOserialno: ***********************
INFOimei: ********************
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: H3G__001
INFObattery-status: good
INFObattery-voltage: 3759mV
INFOdevpower: 27
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
Will it unlock if I send a new unlock ticket through htc dev website?
Click to expand...
Click to collapse
I've got the same phone as you, i'll upload my H3G_001 backup of Jelly Bean
You will need to use Phillz Recovery or Clockwork Mod Recovery
---------- Post added at 03:23 PM ---------- Previous post was at 02:49 PM ----------
wigankev said:
I've got the same phone as you, i'll upload my H3G_001 backup of Jelly Bean
You will need to use Phillz Recovery or Clockwork Mod Recovery
Click to expand...
Click to collapse
https://dl.dropboxusercontent.com/u/92848413/H3G_001%20JellyBean.zip just unzip it flash Phillz or Clockwork Mod Recovery.

wigankev said:
I've got the same phone as you, i'll upload my H3G_001 backup of Jelly Bean
You will need to use Phillz Recovery or Clockwork Mod Recovery
Click to expand...
Click to collapse
Awesome mate, your a legend!
When you say to use phillz or cmr, can I use these because all I can do is access the fastboot screen? Even if I select recovery in fastboot the htc quietly brilliant screen pops up then goes back to fast boot menu.

si_d_2003 said:
Awesome mate, your a legend!
When you say to use phillz or cmr, can I use these because all I can do is access the fastboot screen? Even if I select recovery in fastboot the htc quietly brilliant screen pops up then goes back to fast boot menu.
Click to expand...
Click to collapse
Go on to HTC Dev and get another unlock token, and proceed to unlock again, then flash CWM or Phillz, then recover your phone with the backup i provided. I have also provided the stock htc recovery in the folder seperately.

wigankev said:
Go on to HTC Dev and get another unlock token, and proceed to unlock again, then flash CWM or Phillz, then recover your phone with the backup i provided. I have also provided the stock htc recovery in the folder seperately.
Click to expand...
Click to collapse
Ok Cheers dude, I will give them a while and let you know. Thanks for the help:good:

wigankev said:
Go on to HTC Dev and get another unlock token, and proceed to unlock again, then flash CWM or Phillz, then recover your phone with the backup i provided. I have also provided the stock htc recovery in the folder seperately.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1604439 i recommend using this to unlock bootloader with the token you received from HTC Dev.

Ok, so got it unlocked again, my viper rom was still installed so the phone boots up. Now to get your jelly bean on correct me if Im wrong, your jellybean zip, shall i unzip it? what shall i do with .img file and the others?

si_d_2003 said:
Ok, so got it unlocked again, my viper rom was still installed so the phone boots up. Now to get your jelly bean on correct me if Im wrong, all i do is put the zip on the phones hd the boot into recovery and then select restore? Just tried it and it says no file found, does your back up go into a specific folder? or just select install from zip?
Click to expand...
Click to collapse
No, on Clockword Mod or Phillz recovery you use Backup and Restore option, you don't flash the zip file, i zipped it up so i could upload to dropbox, just flash the 2013-02-05.20.39.08 folder under restore, there should be a folder called Clockword Mod on your SD Card or something like that.

Sorry for being an idiot im just concerned because I was up till 4.30 this morning trying to sort this out. in cwm folder is one called downloads which goes into recoveries folder, does the folder 2013....go in there? Then by flash do you mean going to fast boot- backup/restore - restore? because it says no file found still.

si_d_2003 said:
Sorry for being an idiot im just concerned because I was up till 4.30 this morning trying to sort this out. in cwm folder is one called downloads which goes into recoveries folder, does the folder 2013....go in there? Then by flash do you mean going to fast boot- backup/restore - restore? because it says no file found still.
Click to expand...
Click to collapse
On your storage you should have a file called clockworkmod and inside that you should have another folder in there called backup, so your 2013-02-05.20.39.08 file should be in that backup folder.

wigankev said:
On your storage you should have a file called clockworkmod and inside that you should have another folder in there called backup, so your 2013-02-05.20.39.08 file should be in that backup folder.
Click to expand...
Click to collapse
Sorry there is no back up folder in there. Ive tried installing phillz over cwm it says complete but after flashing and when i reboot its still cwm. and in rom manager when I try to update cwm it gives me an error.

wigankev said:
On your storage you should have a file called clockworkmod and inside that you should have another folder in there called backup, so your 2013-02-05.20.39.08 file should be in that backup folder.
Click to expand...
Click to collapse
So then go into CWM or Phillz recovery then go to Backup and Restore and restore that 2013-02-05.20.39.08 file, then you should be back on stock H3G rom, then just flash the recovery i put in the folder separately, then you should be fully stock, then relock your Hboot/bootloader then you should be able to update your rom OTA to 4.2.2 and hboot to 1.72

Ok, so finally got there in the end. Hopefully. I have one more question and i will leave you alone.....ive sent the lock message and the bootloader now says relocked again. Is this different from locked? Can i get it to say locked instead of relocked as this looks like its been rooted before?
Thanks

si_d_2003 said:
Ok, so finally got there in the end. Hopefully. I have one more question and i will leave you alone.....ive sent the lock message and the bootloader now says relocked again. Is this different from locked? Can i get it to say locked instead of relocked as this looks like its been rooted before?
Thanks
Click to expand...
Click to collapse
Relocked is correct, did you remember to flash the original htc recovery before relocking?

I did, but.....F### its stuck in bootloader loop now. The bloody phone booted and everything then when I restarted it its now stuck looping.

ok after unlocking the phone boots up fine. Is there something wrong when i go to lock it the it wont boot up?
Cheers dude

si_d_2003 said:
Whats the problem do you think? does that mean I have to:
unroot and install the the files you gave me then lock again. I cant even access recovery in the bootloader
Click to expand...
Click to collapse
are you flash the boot.img from your nand backup via fastboot?

Thant said:
are you flash the boot.img from your nand backup via fastboot?
Click to expand...
Click to collapse
No i didnt do that, I just recovered the nand via cwm, then I flashed recovery.img then locked it. It was stuck in loop then as soon as I unlocked it booted.

si_d_2003 said:
No i didnt do that, I just recovered the nand via cwm, then I flashed recovery.img then locked it. It was stuck in loop then as soon as I unlocked it booted.
Click to expand...
Click to collapse
now take the boot.img from nand backup and flash it via fastboot with the command fastboot flash boot nameofboot.img but you must unlock it again and after this relock it again

Ok cool, that looks like its worked. Thanks for that buddy! Do you know if there is any way to change the ****relocked*** back to ***locked***

Please help me

Hello there,
I have the htc one m8. tried to install custom rom while i did followed carefully all steps beside the annoying thing - s-off.
It hasnt says anything about it and i just did those steps:
Open bootloader
install TWRP recovery
flash the rom
Then my m8 reboot but stock on the htc green logo, tried almost everything i had in mind including use my dad GS4 to transfer stock rom into my SD card and then try to install it throw recovery mod which of course, failed.
dont know what alse to do i've been like this for 4-5 hours, please help me!! :crying::crying:

ben33891471 said:
Hello there,
I have the htc one m8. tried to install custom rom while i did followed carefully all steps beside the annoying thing - s-off.
It hasnt says anything about it and i just did those steps:
Open bootloader
install TWRP recovery
flash the rom
Then my m8 reboot but stock on the htc green logo, tried almost everything i had in mind including use my dad GS4 to transfer stock rom into my SD card and then try to install it throw recovery mod which of course, failed.
dont know what alse to do i've been like this for 4-5 hours, please help me!! :crying::crying:
Click to expand...
Click to collapse
Hold down the power button + vol up till your phone reboots (it'll take a bit, 20 seconds or so). AS SOON AS THE SCREEN GOES BLACK slide your finger from vol up to vol down. That will take you to your bootloader.
Hook up to your PC and get into ADB. Enter the command fastboot getvar all and post the readout here. Delete your serial no and IMEI from the readout before posting it for your own security.

xunholyx said:
Hold down the power button + vol up till your phone reboots (it'll take a bit, 20 seconds or so). AS SOON AS THE SCREEN GOES BLACK slide your finger from vol up to vol down. That will take you to your bootloader.
Hook up to your PC and get into ADB. Enter the command fastboot getvar all and post the readout here. Delete your serial no and IMEI from the readout before posting it for your own security.
Click to expand...
Click to collapse
Ok there:
version: 0.5
version-bootloader: 3.16.0.0000
version-baseband: 1.14.21331931.LA21G
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno:
imei:
imei2: Not Support
meid: 00000000000000
product: m8_ul_ca
platform: hTCBmsm8974
modelid: 0P6B12000
cidnum: CWS__001
battery-status: good
battery-voltage: 0mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 0a41237a
hbootpreupdate: 11
gencheckpt: 0

ben33891471 said:
Ok there:
version: 0.5
version-bootloader: 3.16.0.0000
version-baseband: 1.14.21331931.LA21G
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno:
imei:
imei2: Not Support
meid: 00000000000000
product: m8_ul_ca
platform: hTCBmsm8974
modelid: 0P6B12000
cidnum: CWS__001
battery-status: good
battery-voltage: 0mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 0a41237a
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
You have old firmware and probably tried flashing a 4.4.4 ROM. I would suggest getting S-Off to update your firmware. Also your version main is blank. That would give your actual firmware version, but I can tell it is 4.4.2 based from your hboot number. It is blank because the TWRP version you are using is either old or 2.8.1.0. Both will cause that. Update your recovery as well.
In the meantime, flash this in recovery. It is a stock ROM backup that should fix your issue.
If you are going to try to run newer versions of ROMs, you'll need to have newer firmware. You can either get S-Off to do that, or convert back to stock (stock ROM and recovery, unmodified system partition) and take the OTAs.

xunholyx said:
You have old firmware and probably tried flashing a 4.4.4 ROM. I would suggest getting S-Off to update your firmware. Also your version main is blank. That would give your actual firmware version, but I can tell it is 4.4.2 based from your hboot number. It is blank because the TWRP version you are using is either old or 2.8.1.0. Both will cause that. Update your recovery as well.
In the meantime,flash this in recovery[/URL]. It is a stock ROM backup that should fix your issue.
If you are going to try to run newer versions of ROMs, you'll need to have newer firmware. You can either get S-Off to do that, or convert back to stock (stock ROM and recovery, unmodified system partition) and take the OTAs.
Click to expand...
Click to collapse
Yes, my phone is a at&t one, 4.4.2. tried to install the new version of android revolution hd with the lolipop 5.0.
I'm downloading the stock rom you gave me, but how do i install it? via cmd? becuase i cant transfer it to my htc..

ben33891471 said:
Yes, my phone is a at&t one, 4.4.2. tried to install the new version of android revolution hd with the lolipop 5.0.
I'm downloading the stock rom you gave me, but how do i install it? via cmd? becuase i cant transfer it to my htc..
Click to expand...
Click to collapse
You can't put it onto your extSD? In the bootloader menu, pick hboot (vol keys to navigate, power button to select) and it will give you the option for booting into recovery.
Or in ADB/fastboot issue the command fastboot reboot-recovery

xunholyx said:
You can't put it onto your extSD? In the bootloader menu, pick hboot (vol keys to navigate, power button to select) and it will give you the option for booting into recovery.
Or in ADB/fastboot issue the command fastboot reboot-recovery
Click to expand...
Click to collapse
I'll use my sister gs4 to copy the rom to the SD card. Back to you soon with answer

xunholyx said:
You can't put it onto your extSD? In the bootloader menu, pick hboot (vol keys to navigate, power button to select) and it will give you the option for booting into recovery.
Or in ADB/fastboot issue the command fastboot reboot-recovery
Click to expand...
Click to collapse
omg its says failed right away when i do "swipe to confirm flash".. what should i do?

ben33891471 said:
omg its says failed after 2 sec.. what should i do?
Click to expand...
Click to collapse
Okay. I didn't explain the process thinking you would realize that it is a nandroid backup and not a ROM.
You have to place it into your TWRP backup folder.
Here are the instructions:
Q : How do i restore the stock nandroid backup
A : In general :
- Place the nandroid backup unpacked on the sdcard of the phone in the right backup folder
TWRP uses - TWRP\Backups\ or TWRP/Backups/serialnum/ (replace serialnum with your device's serial number. To have TWRP create the proper directory structure for you, just do a simple backup of just the boot partition and put the backup files in there) thanks to garyd9 for the additional info
- Flash the boot.img or boot.emmc.win file from the nandroid backup
- Make a full wipe in the recovery
- Restore the nandroid backup and reboot
If your backups are saved to your SD card, that's where to put it. It's always best to save nandroids to external.
---------- Post added at 01:16 PM ---------- Previous post was at 12:49 PM ----------
ben33891471 said:
omg its says failed right away when i do "swipe to confirm flash".. what should i do?
Click to expand...
Click to collapse
This will probably be easier for you. Download this ROM. It is 4.4.2 based and should work for you. It's not a backup, so no messing around putting it into a folder. Place it onto your extSD and flash it in recovery.

xunholyx said:
Okay. I didn't explain the process thinking you would realize that it is a nandroid backup and not a ROM.
You have to place it into your TWRP backup folder.
Here are the instructions:
Q : How do i restore the stock nandroid backup
A : In general :
- Place the nandroid backup unpacked on the sdcard of the phone in the right backup folder
TWRP uses - TWRP\Backups\ or TWRP/Backups/serialnum/ (replace serialnum with your device's serial number. To have TWRP create the proper directory structure for you, just do a simple backup of just the boot partition and put the backup files in there) thanks to garyd9 for the additional info
- Flash the boot.img or boot.emmc.win file from the nandroid backup
- Make a full wipe in the recovery
- Restore the nandroid backup and reboot
If your backups are saved to your SD card, that's where to put it. It's always best to save nandroids to external.
---------- Post added at 01:16 PM ---------- Previous post was at 12:49 PM ----------
This will probably be easier for you. Download this ROM. It is 4.4.2 based and should work for you. It's not a backup, so no messing around putting it into a folder. Place it onto your extSD and flash it in recovery.
Click to expand...
Click to collapse
I cant to full wipe, only System and cache. Dalvik cache and Data says Failed right away.
I couldn't restore from the backup its says failed as well.
I'm downloading this rom now, hopefully it will work.
Just to be sure, after the download done, i move the zip to my SD card then go to recovery and flash? no other things to do? commands?

ben33891471 said:
I cant to full wipe, only System and cache. Dalvik cache and Data says Failed right away.
I couldn't restore from the backup its says failed as well.
I'm downloading this rom now, hopefully it will work.
Just to be sure, after the download done, i move the zip to my SD card then go to recovery and flash? no other things to do? commands?
Click to expand...
Click to collapse
Yes, just flash it. If you have issues after the flash, retry the wipes and flash it again. Not being able to wipe dalvik and data is strange. What version of TWRP are you using? The newest is 2.8.4.0. I'm using 2.8.3.0 and don't have these problems. You should probably update your recovery. The system, cache, and dalvik get wiped automatically during the ROM install as the devs have that put into the install script.

xunholyx said:
Yes, just flash it. If you have issues after the flash, retry the wipes and flash it again. Not being able to wipe dalvik and data is strange. What version of TWRP are you using? The newest is 2.8.4.0. I'm using 2.8.3.0 and don't have these problems. You should probably update your recovery. The system, cache, and dalvik get wiped automatically during the ROM install as the devs have that put into the install script.
Click to expand...
Click to collapse
This is the name of file Official-TWRP-m8wlv
maybe you could give me the TWRP you have?

ben33891471 said:
This is the name of file Official-TWRP-m8wlv
maybe you could give me the TWRP you have?
Click to expand...
Click to collapse
That's the version for Verizon. Are you on Verizon? If so, you can find all the Verizon TWRP downloads here: http://techerrata.com/browse/twrp2/m8_wlv
If you aren't on Verizon, then that will be what is causing your issues.

xunholyx said:
That's the version for Verizon. Are you on Verizon? If so, you can find all the Verizon TWRP downloads here: http://techerrata.com/browse/twrp2/m8_wlv
If you aren't on Verizon, then that will be what is causing your issues.
Click to expand...
Click to collapse
Oh crap
I'm on AT&T
Just download this one http://www.handy-faq.de/forum/htc_o..._0_touch_recovery_2015_01_01_twrp_themes.html
is it ok?

ben33891471 said:
Oh crap
I'm on AT&T
Just download this one http://www.handy-faq.de/forum/htc_o..._0_touch_recovery_2015_01_01_twrp_themes.html
is it ok?
Click to expand...
Click to collapse
Maybe. The link I gave you is from the official TWRP website, just like this next link is. Flashing a recovery not meant for your device can really screw stuff up and possibly hard brick your phone. Be more careful.
You will want to use one of these recovery versions. I'm using 2.8.3.0, but I have heard good things about the newest 2.8.4.0.
http://techerrata.com/browse/twrp2/m8

ben33891471 said:
Oh crap
I'm on AT&T
Just download this one http://www.handy-faq.de/forum/htc_o..._0_touch_recovery_2015_01_01_twrp_themes.html
is it ok?
Click to expand...
Click to collapse
At&t and GSM variants use same recovery so flash 2.8.4.0 provided in the link above BY xunholyx.
Also i recommend to upgrade the rom by running stock backup and then update through official OTA ..

xunholyx said:
Maybe. The link I gave you is from the official TWRP website, just like this next link is. Flashing a recovery not meant for your device can really screw stuff up and possibly hard brick your phone. Be more careful.
You will want to use one of these recovery versions. I'm using 2.8.3.0, but I have heard good things about the newest 2.8.4.0.
http://techerrata.com/browse/twrp2/m8
Click to expand...
Click to collapse
Allright thanx, this one is for AT&T, right?
Listen the download of the viperone rom just stop in 695 MB
I really dont know what to do, you think after ill put this TWRP recovery you just bring me, and try to flash revolution rom or used the backup it will work?
Even if i dont have s-off ?

xunholyx said:
Maybe. The link I gave you is from the official TWRP website, just like this next link is. Flashing a recovery not meant for your device can really screw stuff up and possibly hard brick your phone. Be more careful.
You will want to use one of these recovery versions. I'm using 2.8.3.0, but I have heard good things about the newest 2.8.4.0.
http://techerrata.com/browse/twrp2/m8
Click to expand...
Click to collapse
ahsan64 said:
At&t and GSM variants use same recovery so flash 2.8.4.0 provided in the link above BY xunholyx.
Also i recommend to upgrade the rom by running stock backup and then update through official OTA ..
Click to expand...
Click to collapse
damm its not working not the TWRP 2.8.4.0 and not the 2.8.3.0
i just ****ing want my phone to get work again why im ****ing stupid i screw my phone
i dont care dont have root and the other **** things just want my phone to work again dont care even on stock
please help me i get nervous its almost 12 hours im try to solve this

ben33891471 said:
damm its not working not the TWRP 2.8.4.0 and not the 2.8.3.0
i just ****ing want my phone to get work again why im ****ing stupid i screw my phone
i dont care dont have root and the other **** things just want my phone to work again dont care even on stock
please help me i get nervous its almost 12 hours im try to solve this
Click to expand...
Click to collapse
what's not working.. ?
Or any error while installing rom .
Can you please show the commands how you are flashing recovery .

ahsan64 said:
what's not working.. "
Or error while installing rom .
Can you please show the commands how you are flashing recovery .
Click to expand...
Click to collapse
I type fastboot boot and then paste the file its done and restart but stock on the logo with the red words and when i tap on the screen there is vibrate but thats all
please help me bro i dont know what to do

Please help for my HTC One M8 update

I write here because i can't write to he's thread.
I installed the 6.0 rom for my HTC One M8 from graffixnyc, but has not sound and it write's driver error, unknown problem. What's the problem?
I have S-on, custom recovery (twrp) and unlock bootloader. Plus the Hboot write's wrong image error.
I can't convert the cid to GOOGL_001, i have T-MOB101. That's the problem?
Thanks for the help!
Sorry for my bad English, I'm Hungarian!

Old firmware probably, you likely need to go back to stock and wait for all ota updates . BTW, this should be in q and a not general

timbohobbs said:
Old firmware probably, you likely need to go back to stock and wait for all ota updates . BTW, this should be in q and a not general
Click to expand...
Click to collapse
I can't back to stock because, not have original rom, firmware and ruu for this M8. It's a DE phone supposedly, but i can use it from Hungary with my Hungary sim card.
I wanna try to upgrade once and the phone bricked and i install twrp and a stock rooted rom from android revolution hd.

You'll probably run into problems if your firmware is out of date. S off may get you out of a hole

peti439 said:
I can't back to stock because, not have original rom, firmware and ruu for this M8. It's a DE phone supposedly
Click to expand...
Click to collapse
By DE you mean Developer's Edition? But your top post says T-MOB101.
If you don't know what your version is, you'll never get an RUU to work.
You can restore to stock nandroid from the collection posted on these threads, but again you need to know your correct CID version.
Do fastboot getvar all, and post the output (be sure to delete IMEI and serial numbers, as these are personal info) and we may be able to determine your actual CID version.
---------- Post added at 02:31 PM ---------- Previous post was at 02:31 PM ----------
peti439 said:
I can't convert the cid to GOOGL_001, i have T-MOB101. That's the problem?
Click to expand...
Click to collapse
You need s-off to change CID.

redpoint73 said:
By DE you mean Developer's Edition? But your top post says T-MOB101.
Click to expand...
Click to collapse
T-Mobile DE (Germany) - T-MOB101 - software version no. x.xx.111.x

ckpv5 said:
T-Mobile DE (Germany) - T-MOB001 - software version no. x.xx.111.x
Click to expand...
Click to collapse
Thanks! I thought that might be the case, but it was ambiguous. That's why its best for folks to be specific and detailed when asking for help!
To OP, still need getvar output to properly identify the right stock nandroid.

redpoint73 said:
Thanks! I thought that might be the case, but it was ambiguous. That's why its best for folks to be specific and detailed when asking for help!
To OP, still need getvar output to properly identify the right stock nandroid.
Click to expand...
Click to collapse
Agreed ... a typo is corrected - should read T-MOB101

redpoint73 said:
Thanks! I thought that might be the case, but it was ambiguous. That's why its best for folks to be specific and detailed when asking for help!
To OP, still need getvar output to properly identify the right stock nandroid.
Click to expand...
Click to collapse
I go to my computer and make a picture for the cidnum number. Wait a little

Here's what i got. My Hboot is 3.19.0.0000 and the Radio is 1.25.214500021.06G ( I don't know this are need )
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.214500021
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.111.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxx
(bootloader) imei: xxxxxxx
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: T-MOB101
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

peti439 said:
Here's what i got.
Click to expand...
Click to collapse
I clearly posted previously (Post #5 above) to delete your IMEI and serial numbers from getvar output. These are personal data what should never be posted online. Please delete these numbers for your own protection.
---------- Post added at 09:37 AM ---------- Previous post was at 09:33 AM ----------
peti439 said:
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.214500021
(bootloader) version-main: 4.19.111.2
Click to expand...
Click to collapse
The above info indicates that firmware shouldn't be an issue.
Did you do a full wipe (data, cache, Dalvik) when installing the GPE ROM?
---------- Post added at 09:41 AM ---------- Previous post was at 09:37 AM ----------
peti439 said:
Plus the Hboot write's wrong image error.
I can't convert the cid to GOOGL_001, i have T-MOB101. That's the problem?
Click to expand...
Click to collapse
It sounds like you are trying to do 2 different things:
- Flash the ROM zip in TWRP
- Flash the RUU (s-off required)
Which is it? You need to make up your mind, and understand the difference between the 2.

redpoint73 said:
I clearly posted previously (Post #5 above) to delete your IMEI and serial numbers from getvar output. These are personal data what should never be posted online. Please delete these numbers for your own protection.
---------- Post added at 09:37 AM ---------- Previous post was at 09:33 AM ----------
The above info indicates that firmware shouldn't be an issue.
Did you do a full wipe (data, cache, Dalvik) when installing the GPE ROM?
Click to expand...
Click to collapse
I make a full wipe before install the rom ( i make a full wipe before install any rom ). I installed the rom, make the setup steps ( login, etc ) and I can't hear any sound. I make a reboot and I looked the driver error.

peti439 said:
I make a full wipe before install the rom ( i make a full wipe before install any rom ). I installed the rom, make the setup steps ( login, etc ) and I can't hear any sound. I make a reboot and I looked the driver error.
Click to expand...
Click to collapse
Try to flash again.
Did you read the ROM thread to see if others had this issue?

redpoint73 said:
Try to flash again.
Did you read the ROM thread to see if others had this issue?
Click to expand...
Click to collapse
I flashed the rom three times and doesn't work. I not see others have any issues.

---------- Post added at 09:41 AM ---------- Previous post was at 09:37 AM ----------
redpoint73 said:
It sounds like you are trying to do 2 different things:
- Flash the ROM zip in TWRP
- Flash the RUU (s-off required)
Which is it? You need to make up your mind, and understand the difference between the 2.
Click to expand...
Click to collapse
I try to flash the ruu with 0p6bdiag.zip in HBoot and try to flash the rom with twrp. That was the problem to writes the error in Hboot?

peti439 said:
I try to flash the ruu with 0p6bdiag.zip in HBoot and try to flash the rom with twrp. That was the problem to writes the error in Hboot?
Click to expand...
Click to collapse
"Wrong image" means you are trying to run an RUU that doesn't match your CID. You need s-off to change CID.
---------- Post added at 10:16 AM ---------- Previous post was at 10:15 AM ----------
peti439 said:
I flashed the rom three times and doesn't work. I not see others have any issues.
Click to expand...
Click to collapse
Try downloading the ROM zip to eliminate the possibility that it was corrupted during download.
Did you cancel the option in TWRP to root the ROM, as directed in the ROM thread?

redpoint73 said:
"Wrong image" means you are trying to run an RUU that doesn't match your CID. You need s-off to change CID.
---------- Post added at 10:16 AM ---------- Previous post was at 10:15 AM ----------
Try downloading the ROM zip to eliminate the possibility that it was corrupted during download.
Did you cancel the option in TWRP to root the ROM, as directed in the ROM thread?
Click to expand...
Click to collapse
I canceled to root the rom because I tried to root the rom, i got bootloop everytime.

peti439 said:
I canceled to root the rom because I tried to root the rom, i got bootloop everytime.
Click to expand...
Click to collapse
Which is expected, and clearly indicated in the ROM instructions.
But it sounds like at least on the latest flash attempts, you properly cancelled the root option.
I don't seen much reason for the bugs you are experiencing. Did you try to download the ROM again as previously suggested?

redpoint73 said:
Which is expected, and clearly indicated in the ROM instructions.
But it sounds like at least on the latest flash attempts, you properly cancelled the root option.
I don't seen much reason for the bugs you are experiencing. Did you try to download the ROM again as previously suggested?
Click to expand...
Click to collapse
I downloaded two times. Once my computer and second time to my girlfriend laptop ( that was three days ago ) and doesn't work, the zip was not corrupted.