[Q] hd stuck on boot screen,rooted but s-on - Desire HD Q&A, Help & Troubleshooting

hi i hope someone can help my htc desire hd is s-on and bootloader locked but cant insall any roms this is the info on my phone its also rooted
c:\james>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 2.00.0029
INFOversion-baseband: 26.14.04.28_M
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 3.13.0.0
INFOserialno: SH11ARXxxxxx
INFOimei: 352668047339989
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9810000
INFOcidnum: HTC__001
INFObattery-status: good
INFObattery-voltage: 4182mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: fcef1579
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
finished. total time: 0.010s
i hope some one can tell me the correct ruu from shiped roms i have tried severall also the phone is rooted but cant install custom roms it has clockwork recovery v5.8.1.5 but wont let me install anything that way either
thanks for your help jimmy

You're S-On, bootloader locked, and rooted? Unlock your bootloader and fastboot flash a recovery. Root alone won't let you flash ROMs.

Nlo
bananagranola said:
You're S-On, bootloader locked, and rooted? Unlock your bootloader and fastboot flash a recovery. Root alone won't let you flash ROMs.
Click to expand...
Click to collapse
Thanks bananagranola can u tell me which one pls tried flashing ruu before with bootloaer unlocked

Not a RUU, a recovery.

bananagranola said:
Posting nonsense to get ten posts and posting in a language other than English are both not allowed.
Click to expand...
Click to collapse
Thank u for your warning,i got it.:fingers-crossed:
---------- Post added at 02:29 PM ---------- Previous post was at 02:17 PM ----------
bananagranola said:
Posting nonsense to get ten posts and posting in a language other than English are both not allowed.
Click to expand...
Click to collapse
By the way,can i enroll the registeredname is Chinese? I worried about this.:crying:

王强_Sir said:
By the way,can i enroll the registeredname is Chinese? I worried about this.:crying:
Click to expand...
Click to collapse
I believe you can. Just don't post without a translation.

Thread has been cleaned.
Please note all posts must be in English.

Hi can you tell me where to download the recovery tks

jimmymac1 said:
Hi can you tell me where to download the recovery tks
Click to expand...
Click to collapse
Google for clockworkmod. It should be the top result. Find the one for DHD. My finding it for you will take as much effort as your finding it yourself. This is a forum where you are expected to search and read for yourself; no one will hold your hand.

hi bananagranola ive done all that when i install roms it just keeps going back to htc white logo screen i installed this recovery-clockwork-2.5.1.2-ace-modaco-r2.img and then a rom

If you are not S-Off you need to fastboot flash the ROM zip's boot.img.

bananagranola said:
If you are not S-Off you need to fastboot flash the ROM zip's boot.img.
Click to expand...
Click to collapse
thank you mate you are diamond

If it helps boot into hboot then fastboot
Make sure you have the drivers installed
Connect phone and make sure it says fastboot usb
from the directory that contains adb, fastboot etc copy the recovery.img to it and run a cmd prompt
fastboot flash recovery recovery.img.
Reboot phone into recovery and you should have cwm or 4ext whatever recovery.img you used.
If you are s-on and want to use custom roms you'll have to unlock boot with htdev and manually fastboot flash the roms boot.img after installing the rom with the recovery you're using.
Stu

Related

:S Phone cannot boot :/

My friend has just unlocked his bootloader using HTC Dev, this has left it S-ON, so he installed cwm, made a nandroid, then began flashing rom's, he flashed the boot.img separate via fastboot due to the s-on, yet aosp rom's just get stuck on the boot animation, and any sense rom, (including the backup) just boot straight to recovery :/ He's asked me for help but I'm at a loss to explain this :S
we have tried reflashing an RUU but it just complained about it being the wrong version even though there is no other version it could be
Any ideas?
Thanks in advance
Relock the bootloader, then root using the ace advanced kit. You will may find a link to it in xda or if you search for glevitan. The hack kit was removed from xda.
Sent from a dream.
l.m.prowse said:
My friend has just unlocked his bootloader using HTC Dev, this has left it S-ON, so he installed cwm, made a nandroid, then began flashing rom's, he flashed the boot.img separate via fastboot due to the s-on, yet aosp rom's just get stuck on the boot animation, and any sense rom, (including the backup) just boot straight to recovery :/ He's asked me for help but I'm at a loss to explain this :S
we have tried reflashing an RUU but it just complained about it being the wrong version even though there is no other version it could be
Any ideas?
Thanks in advance
Click to expand...
Click to collapse
you have to flash the boot.img in fastboot commands if you have unlocked the bootloader with HTCDEV. Do that, and the you will have a working phone.
HTCDEV is useless, I would suggest that u relock the bootloader and then use the Hack Kit....:good:
Teichopsia said:
Relock the bootloader, then root using the ace advanced kit. You will may find a link to it in xda or if you search for glevitan. The hack kit was removed from xda.
Sent from a dream.
Click to expand...
Click to collapse
glevitan said:
you have to flash the boot.img in fastboot commands if you have unlocked the bootloader with HTCDEV. Do that, and the you will have a working phone.
HTCDEV is useless, I would suggest that u relock the bootloader and then use the Hack Kit....:good:
Click to expand...
Click to collapse
We cannot get the phone to boot into a rom, therefore the hack kit is useless, it requires the phone to boot, and we've relocked and everything, it just refuses to boot any roms (yes we have been flashing the boot.img's via fastboot
l.m.prowse said:
We cannot get the phone to boot into a rom, therefore the hack kit is useless, it requires the phone to boot, and we've relocked and everything, it just refuses to boot any roms (yes we have been flashing the boot.img's via fastboot
Click to expand...
Click to collapse
Shhhh, saying the hack kit is useless will get you in a lot of trouble. Be patient, listen to glevitan.
@everyone, pardon him on my behalf - he doesn't know. Try to help him despite that comment.
Sent from a dream.
Teichopsia said:
Shhhh, saying the hack kit is useless will get you in a lot of trouble. Be patient, listen to glevitan.
@everyone, pardon him on my behalf - he doesn't know. Try to help him despite that comment.
Sent from a dream.
Click to expand...
Click to collapse
His advice was to use the hack kit, which we cannot do without a booting OS, which we currently do not have, which is the reason I posted here.
Teichopsia said:
Shhhh, saying the hack kit is useless will get you in a lot of trouble. Be patient, listen to glevitan.
@everyone, pardon him on my behalf - he doesn't know. Try to help him despite that comment.
Sent from a dream.
Click to expand...
Click to collapse
From what I've gathered, he's in a bootloop, unlocked with HTCDEV and has tried to flash the backed up boot.img via fastboot.
In this specific situation how is the hack kit any use to him if he can't get past the splash screen?
Perhaps double check the locations and files you're pushing/flashing and "fastboot erase cache" before and after.
I'm sure you've probably tried this already but it's the only other things I can think of causing the loop.
sprogurt said:
From what I've gathered, he's in a bootloop, unlocked with HTCDEV and has tried to flash the backed up boot.img via fastboot.
In this specific situation how is the hack kit any use to him if he can't get past the splash screen?
Perhaps double check the locations and files you're pushing/flashing and "fastboot erase cache" before and after.
I'm sure you've probably tried this already but it's the only other things I can think of causing the loop.
Click to expand...
Click to collapse
Yeah we've tried all of that :/ I can't think of any reason its doing it. It's the same as I do on my HOX, never had a single problem with it :/
l.m.prowse said:
Yeah we've tried all of that :/ I can't think of any reason its doing it. It's the same as I do on my HOX, never had a single problem with it :/
Click to expand...
Click to collapse
Ok, in order to flash a RUU you will have to relock your bootloader. The main version error is due to the unlocked bootloader.
If you still have CWM, before relocking the bootloader u can try to flash a custom rom and then flash the boot.img in fastboot (but doing a wipe first) If that is not working, then you gotta flash a RUU but wil only work if you relock the bootloader....:good:
glevitan said:
Ok, in order to flash a RUU you will have to relock your bootloader. The main version error is due to the unlocked bootloader.
If you still have CWM, before relocking the bootloader u can try to flash a custom rom and then flash the boot.img in fastboot (but doing a wipe first) If that is not working, then you gotta flash a RUU but wil only work if you relock the bootloader....:good:
Click to expand...
Click to collapse
We relocked the bootloader, and the RUU still said it was the wrong version, the image on the device is 1.13 whereas the ruu is 1.12.405.1, there is no 1.13 ruu :/
l.m.prowse said:
We relocked the bootloader, and the RUU still said it was the wrong version, the image on the device is 1.13 whereas the ruu is 1.12.405.1, there is no 1.13 ruu :/
Click to expand...
Click to collapse
ok, do the following, what CID number does the phone have?
boot in hboot, choose fastboot and then plug the phone (you should see fastboot usb in red). Now open a CMD as admin in the PC and type fastboot getvar all. Get the INFOcidnum...and paste it here...
glevitan said:
ok, do the following, what CID number does the phone have?
boot in hboot, choose fastboot and then plug the phone (you should see fastboot usb in red). Now open a CMD as admin in the PC and type fastboot getvar all. Get the INFOcidnum...and paste it here...
Click to expand...
Click to collapse
C:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0029
(bootloader) version-baseband: 26.14.04.28_M
(bootloader) version-cpld: None
(bootloader) version-microp: 0438
(bootloader) version-main: 3.13.0.0
(bootloader) serialno: SH0CFRX04874
(bootloader) imei: 352668046527618
(bootloader) product: ace
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PD9810000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3882mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: fcef1579
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) region-id: 0
That's everything it displayed
same problem
I have the same problem. I use bootloader from htc.dev, forgot to backup and i am stuck on fastboot mode. I have cwm but i succesfully instal miui rom, but i cant to use phone, because HTC logo dont move i follow you suggestions. I hope u can help me too.
INFOversion: 0.5
INFOversion-bootloader: 2.00.0029
INFOversion-baseband: 26.14.04.28
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 1.31.405.6
INFOserialno: SH11ZRX02646
INFOimei: 356299049533530
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9810000
INFOcidnum: HTC__001
INFObattery-status: good
INFObattery-voltage: 4194mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: fcef1579
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
finished. total time: 0.005s

[Q] Looking for Endeavour 1.29.206.11 please

I hope that this post is in the correct forum section - apologies if not and apologies if there is already a thread on this subject (I did try searching but nothing that provided a link to a RUU).
Here's what I've done:
Flashed a custom ROM to my UK O2 HTC One X
Then tried to restore it to stock without taking a Clockwork recovery backup (deleted all caches and storage in the process)
Tried to flash with stock RUU found online (1.26.206.2) but RUU software throws an error as the exisiting f/w is 1.29.206.11 and this is what it is expecting
I can access the HOX through fastboot to lock and unlock the device but I cannot see the "SD card" to copy over a custom ROM to at least get some life into the thing (it just sits at the white HTC loading screen until the battery dies).
Ideally I want to return the thing to stock (if anyone has a O2 UK 1.29.206.11 RUU) but failing that is there anyway to get a custom ROM on there (for installation with CWM) without my PC (Windows 7 or Mac available) seeing the HOX storage?
Thanks for reading and any help you can pass on.
brlauk_HOX said:
I hope that this post is in the correct forum section - apologies if not and apologies if there is already a thread on this subject (I did try searching but nothing that provided a link to a RUU).
Here's what I've done:
Flashed a custom ROM to my UK O2 HTC One X
Then tried to restore it to stock without taking a Clockwork recovery backup (deleted all caches and storage in the process)
Tried to flash with stock RUU found online (1.26.206.2) but RUU software throws an error as the exisiting f/w is 1.29.206.11 and this is what it is expecting
I can access the HOX through fastboot to lock and unlock the device but I cannot see the "SD card" to copy over a custom ROM to at least get some life into the thing (it just sits at the white HTC loading screen until the battery dies).
Ideally I want to return the thing to stock (if anyone has a O2 UK 1.29.206.11 RUU) but failing that is there anyway to get a custom ROM on there (for installation with CWM) without my PC (Windows 7 or Mac available) seeing the HOX storage?
Thanks for reading and any help you can pass on.
Click to expand...
Click to collapse
if you can get into to CWM there is an option to mount sd in there somewhere, if you can't get into it maybe try re-flashing it
seanicca said:
if you can get into to CWM there is an option to mount sd in there somewhere, if you can't get into it maybe try re-flashing it
Click to expand...
Click to collapse
Thanks for the reply - I tried that but CWM returns an error when trying to mount the SD card.
Tried flashing 1.26.206.2 through fast boot?
brlauk_HOX said:
Thanks for the reply - I tried that but CWM returns an error when trying to mount the SD card.
Click to expand...
Click to collapse
Cwm 5.8.4.0 allows sd mounting in recovery, try flashing that
sent from my One X using xda venom premium
xmoo said:
Tried flashing 1.26.206.2 through fast boot?
Click to expand...
Click to collapse
DO you mean extracting the 2 img files from the RUU zip and running from fastboot command prompt? If so, the second img file returns a [0000006] error.
brlauk_HOX said:
DO you mean extracting the 2 img files from the RUU zip and running from fastboot command prompt? If so, the second img file returns a [0000006] error.
Click to expand...
Click to collapse
Get the rom.zip and
adb reboot oem-78
fastboot flash zip rom.zip
http://forum.xda-developers.com/showthread.php?p=28665193
Sent from my HTC One X
I'm looking for this Nandroid too but all the links I've found are broken. Can anyone help out? Preferably a CWM backup if at all possible.
brlauk_HOX said:
I hope that this post is in the correct forum section - apologies if not and apologies if there is already a thread on this subject (I did try searching but nothing that provided a link to a RUU).
Here's what I've done:
Flashed a custom ROM to my UK O2 HTC One X
Then tried to restore it to stock without taking a Clockwork recovery backup (deleted all caches and storage in the process)
Tried to flash with stock RUU found online (1.26.206.2) but RUU software throws an error as the exisiting f/w is 1.29.206.11 and this is what it is expecting
I can access the HOX through fastboot to lock and unlock the device but I cannot see the "SD card" to copy over a custom ROM to at least get some life into the thing (it just sits at the white HTC loading screen until the battery dies).
Ideally I want to return the thing to stock (if anyone has a O2 UK 1.29.206.11 RUU) but failing that is there anyway to get a custom ROM on there (for installation with CWM) without my PC (Windows 7 or Mac available) seeing the HOX storage?
Thanks for reading and any help you can pass on.
Click to expand...
Click to collapse
blocka said:
I'm looking for this Nandroid too but all the links I've found are broken. Can anyone help out? Preferably a CWM backup if at all possible.
Click to expand...
Click to collapse
Install directly the RUU 1.26.206.2
Thant said:
Install directly the RUU 1.26.206.2
Click to expand...
Click to collapse
thank you appreciate the link
Thant said:
Install directly the RUU 1.26.206.2
Click to expand...
Click to collapse
BTW my HBOOT version is 0.96, this won't cause any issues will it when it comes to running the RUU?
blocka said:
BTW my HBOOT version is 0.96, this won't cause any issues will it when it comes to running the RUU?
Click to expand...
Click to collapse
Please post the result from command fastboot getvar all and delete IMEI and S/N
Thant said:
Please post the result from command fastboot getvar all and delete IMEI and S/N
Click to expand...
Click to collapse
fastboot getvar all
INFOversion: 0.5a
INFOversion-bootloader: 0.96.0000
INFOversion-baseband: None
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.29.206.11
INFOserialno: xxxxxxxxxxxxx
INFOimei: xxxxxxxxxxxxxxx
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: None
INFObattery-status: good
INFObattery-voltage: 4148mV
INFOdevpower: 100
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
finished. total time: 1.172s
fastboot oem readcid
... INFODEBUG: cid: O2___001
blocka said:
fastboot getvar all
INFOversion: 0.5a
INFOversion-bootloader: 0.96.0000
INFOversion-baseband: None
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.29.206.11
INFOserialno: xxxxxxxxxxxxx
INFOimei: xxxxxxxxxxxxxxx
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: None
INFObattery-status: good
INFObattery-voltage: 4148mV
INFOdevpower: 100
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
finished. total time: 1.172s
fastboot oem readcid
... INFODEBUG: cid: O2___001
Click to expand...
Click to collapse
Ok in this case Download RUU 2.17.206.2 and run the RUU the RUU 1.26.206.2 will not work for you. Lock the bootloader and run the RUU
Thant said:
Ok in this case Download RUU 2.17.207.2 and run the RUU the RUU 1.267.206.2 will not work for you.
Click to expand...
Click to collapse
Cheers! can you explain to a noob why this is the case? BTW the file in the link is only 15MB, is this the correct file size?
blocka said:
Cheers! can you explain to a noob why this is the case? BTW the file in the link is only 15MB, is this the correct file size?
Click to expand...
Click to collapse
Ok this is bad this RUU is not full must be 500-600 Mb= Surch from google to download the RUU 2.17.206.2 for HTC one X and install this in Android RUU files store is not the full. The case is you have 1.29.206.11 witch is newer vrom 1.26.206.2 and if you try to install it you will receive error wrong RUU.
EDIT: I think you will not find this RUU surch here in xda for nandroid backup for 1.29.206.11 and restor it and dont forget to restor the stock recovery too.
Thant said:
Ok this is bad this RUU is not full must be 500-600 Mb= Surch from google to download the RUU 2.17.206.2 for HTC one X and install this in Android RUU files store is not the full. The case is you have 1.29.206.11 witch is newer vrom 1.26.206.2 and if you try to install it you will receive error wrong RUU.
EDIT: I think you will not find this RUU surch here in xda for nandroid backup for 1.29.206.11 and restor it and dont forget to restor the stock recovery too.
Click to expand...
Click to collapse
Thanks for your help, appreciate it!
I've got the RUU you suggested from HERE
Now to apply this RUU all I need to do is run the file (exe) and follow the bouncing ball?
Then once flashed (back to stock), to install a custom recovery (so I can do a nandroid) is unlock the bootloader, install the recovery, and take the nandroid backup. To get the OTA Update(s), I'll need to relock the bootloader, do the automated system updater, redo nandroid, then onto a custom recovery once HBOOT has been updated via the OTA process?
EDIT: Take a nandroid backup first of course
blocka said:
Thanks for your help, appreciate it!
I've got the RUU you suggested from HERE
Now to apply this RUU all I need to do is run the file (exe) and follow the bouncing ball?
Then once flashed (back to stock), to install a custom recovery (so I can do a nandroid) is unlock the bootloader, install the recovery, and take the nandroid backup. To get the OTA Update(s), I'll need to relock the bootloader, do the automated system updater, redo nandroid, then onto a custom recovery once HBOOT has been updated via the OTA process?
EDIT: Take a nandroid backup first of course
Click to expand...
Click to collapse
NO You can't receive the OTA via custom recovery you need ctock recovery and stock rom unrooted
1) Lock your bootloader
2) Run the RUU
3) Apllay all update to 4.x.206.x 4.2.2 JB
4) Unlock your Bootloader
5) Install Philz custom recovery
6) Do a Nandroid Backup on 4.2.2.JB . Save on secure plase it is better to have 2 copies on nandroid on different place
7) If you wont Install custom rom or root the stock it is your decision and don't forget to flash the boot.img if you install custom rom
Thant said:
Ok in this case Download RUU 2.17.207.2 and run the RUU the RUU 1.26.206.2 will not work for you. Lock the bootloader and run the RUU
Click to expand...
Click to collapse
Hi - was just about to go through the process of reverting to stock when I noticed the RUU and link you suggested
Download RUU 2.17.207.2
Click to expand...
Click to collapse
actually is linked to RUU_ENDEAVOR_U_ICS_40_S_O2_UK_2.17.206.2_Radio_2.1204.135.20_release_275038_signed.exe.
So before I start I need to find out exactly what RUU I need, either 2.17.206.2 or 2.17.207.2.
Thanks for ya help .

I have a rogers htc one x and its stuck on boot screen

Alright so thus far i have
unlocked
rooted
installed twrp and then cwm recovery because i the tutorial called for twrp and i wanted to install with cwm
then here is where i had issues, i installed an Endeavor rom on my Evita device, it was an honest mistake
because its my friends phone and i did not know enough about it.
Now where i am at is i have tried different roms to try to fix it
then factory reset
the device has no rom from my understanding, gets stuck on boot but i can get into fastboot and adb push
files to the device with no real issue.
here is the getvar
C:\Android>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 2.14.0000
INFOversion-baseband: 0.23a.32.09.29
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main:
INFOversion-misc: PVT SHIP S-ON
INFOserialno: HT24BW300901
INFOimei: 359691042209067
INFOproduct: evita
INFOplatform: HBOOT-8960
INFOmodelid: PJ8310000
INFOcidnum: ROGER001
INFObattery-status: good
INFObattery-voltage: 4120mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-97c9a06e
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
so it has hbooot 2.14
was running android 4.1.1
i tried to install cm 10.1
the issue im running into is i try to flash a boot.img and get a verify fail, tried to ruu flash with zip and exe and verify fails.
help! i honestly wouldnt post if i wasnt desperate for help, ive been at this for 6 hours trying to fix this phone
xkronusx said:
INFOsecurity: on
Click to expand...
Click to collapse
I guess you had re-locked back the device?
You need unlock it yet again to flash custom things.
Curiousity drove me for the question, how you enede up with correct recovery and wrong custom ROM. Don't mess up evita and edeavoru again, it is dangerous.. Remember go back to X+ forum.
HebeGuess said:
I guess you had re-locked back the device?
You need unlock it yet again to flash custom things.
Curiousity drove me for the question, how you enede up with correct recovery and wrong custom ROM. Don't mess up evita and edeavoru again, it is dangerous.. Remember go back to X+ forum.
Click to expand...
Click to collapse
Yes i relocked the device to try and flash and ruu but nothing is completing, im not sure if im using the wrong ruu file
or maybe there's something im missing.
also im S'on if that matters.
Not the X+ but the HTC one XL (AT&T) forum
Mr Hofs said:
Not the X+ but the HTC one XL (AT&T) forum
Click to expand...
Click to collapse
Sorry! still confused with the naming schemes and everything.
Update flashed a boot.img after unlocking again and installed a recovery!
Thanks!
Mr Hofs said:
Not the X+ but the HTC one XL (AT&T) forum
Click to expand...
Click to collapse
Opps my bloody hell...
Thanks Mr Hofs, guess I need to take sleep now..
ANd, He is right XL not X+

[Q] can i get some luck? Going back to stock

Hello everybody,
I tried to install jellytime on my Desire HD, so i used Easy Ace Root Tool.
I used fastboot command to flash the boot.img to the phone and since then, the only menu available is the one of the bootloader.
As far as i tried the ruu packages fail to restore things.
Is there a way (preferably a guide) to return my phone to stock ?
Loading to fastboot now shows:
*** relocked ***
ACE PVT SHIP S-ON RL
HBOOT-2.00.0029
MICROP-0438
RADIO-26.14.04.28_M
eMMC-boot
Dec 22 2011, 14:28:19
Thanks!
gavanas said:
Hello everybody,
I tried to install jellytime on my Desire HD, so i used Easy Ace Root Tool.
I used fastboot command to flash the boot.img to the phone and since then, the only menu available is the one of the bootloader.
As far as i tried the ruu packages fail to restore things.
Is there a way (preferably a guide) to return my phone to stock ?
Loading to fastboot now shows:
*** relocked ***
ACE PVT SHIP S-ON RL
HBOOT-2.00.0029
MICROP-0438
RADIO-26.14.04.28_M
eMMC-boot
Dec 22 2011, 14:28:19
Thanks!
Click to expand...
Click to collapse
fastboot getvar all
and post the results.
nlooooo said:
fastboot getvar all
and post the results.
Click to expand...
Click to collapse
C:\Users\George Gavanas>fastboot getvar
INFOversion: 0.5
INFOversion-bootloader: 2.00.0029
INFOversion-baseband: 26.14.04.28_M
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 3.13.0.0
INFOserialno: SH15ZRX00171
INFOimei: ???
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9810000
INFOcidnum: HTC__001
INFObattery-status: good
INFObattery-voltage: 4035mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: fcef1579
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
finished. total time: 0.010s
gavanas said:
C:\Users\George Gavanas>fastboot getvar
INFOversion: 0.5
INFOversion-bootloader: 2.00.0029
INFOversion-baseband: 26.14.04.28_M
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 3.13.0.0
INFOserialno: *************************
INFOimei: **********************
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9810000
INFOcidnum: HTC__001
INFObattery-status: good
INFObattery-voltage: 4035mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: fcef1579
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
finished. total time: 0.010s
Click to expand...
Click to collapse
Go here
http://www.shipped-roms.com/index.php?category=android&model=Ace
download thi RUU
RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed.exe
And try to run it with phone in fastboot.
If that doesn't work try with some RUU that has 3.13.xxx.x main version (i.e. RUU_Ace_Sense30_S_hTC_Asia_WWE_3.13.707.4_R_Radio_12.65.60.29_26.14.04.28_M_release_234022_signed.exe)
both result in error...
The second says ID error
is there any way i can restore the original firmware? maybe put it in the sd card?
gavanas said:
both result in error...
The second says ID error
is there any way i can restore the original firmware? maybe put it in the sd card?
Click to expand...
Click to collapse
I found the rom.zip from the second file, renamed it to PD98IMG.zip and inserted it to my sd, but it say CID error.
I saw that everyone says about a goldcard but i don't seem to get it. The goldcard generator i downloaded say they could not locate the CID. Can i download a CID image?
Where should i put it, if i find one?
Thanks!
gavanas said:
I found the rom.zip from the second file, renamed it to PD98IMG.zip and inserted it to my sd, but it say CID error.
I saw that everyone says about a goldcard but i don't seem to get it. The goldcard generator i downloaded say they could not locate the CID. Can i download a CID image?
Where should i put it, if i find one?
Thanks!
Click to expand...
Click to collapse
I have tried many different ruu's and always get an error.
When i flash with PD98IMG i get a cid error
Is there any way out?
Even with a custom rom (jellytime)
Please help!!!:crying:
Use AAHK2
gavanas said:
I have tried many different ruu's and always get an error.
When i flash with PD98IMG i get a cid error
Is there any way out?
Even with a custom rom (jellytime)
Please help!!!:crying:
Click to expand...
Click to collapse
Try the AAHK2 Script. Make sure you follow all the instructions before using the script.. It will automatically do things for you and just follow the on screen instructions... At the end you will have your Stock Rom perfectly running... :good:
Delete your imei #
Get nloooo to delete it from the quote as well.
Sent from a dream.
gkprashu said:
Try the AAHK2 Script. Make sure you follow all the instructions before using the script.. It will automatically do things for you and just follow the on screen instructions... At the end you will have your Stock Rom perfectly running... :good:
Click to expand...
Click to collapse
I used AAHK2 when my phone got into a similar situation. It worked like charm
gavanas said:
I have tried many different ruu's and always get an error.
When i flash with PD98IMG i get a cid error
Is there any way out?
Even with a custom rom (jellytime)
Please help!!!:crying:
Click to expand...
Click to collapse
Do not use the AAHK2 if you are trying to return to stock for warranty purposes, thou I highly doubt that you still have warranty on this device .
In order to bypass the CID error you need to use a goldcard. Otherwise, you will need the exact ruu for your device.
glevitan said:
Do not use the AAHK2 if you are trying to return to stock for warranty purposes, thou I highly doubt that you still have warranty on this device .
In order to bypass the CID error you need to use a goldcard. Otherwise, you will need the exact ruu for your device.
Click to expand...
Click to collapse
After trying the 4.3 beta versions, i tried again to install the original firmware.
As before, the ruu setup did not work. It should, since my cid is HTC__001, and i was trying with every WWE version available.
Anyway, during setup, i found in the temp folder the rom.zip, and within it the necessary boot.img, system.img and recovery.img.
I flashed them through cmd using fastboot.
Everything worked out, now i am back to stock, but i guess that my phone is something like Frankenstein, using the radio and libraries from the last jellytime image i installed...
It works, but i don't recommend it. I think that i finally got lucky, and didn't brick my Desire HD.
Thanks for all your help and interest.
glevitan said:
Do not use the AAHK2 if you are trying to return to stock for warranty purposes, thou I highly doubt that you still have warranty on this device .
In order to bypass the CID error you need to use a goldcard. Otherwise, you will need the exact ruu for your device.
Click to expand...
Click to collapse
That is weird as ruu's flash all partitions.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
glevitan said:
That is weird as ruu's flash all partitions.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Click to expand...
Click to collapse
i think you misunderstood him mate, he flashrd only specific img files from ruu not the whole thing. in this case, radio doesnt get flashed, but that shouldnt be to big of a problem.
to op: custom roms dont contain radios. so radio that is on your device is the same as before you flashed jellytime
t0mas_ said:
i think you misunderstood him mate, he flashrd only specific img files from ruu not the whole thing. in this case, radio doesnt get flashed, but that shouldnt be to big of a problem.
to op: custom roms dont contain radios. so radio that is on your device is the same as before you flashed jellytime
Click to expand...
Click to collapse
Well, RILs are not compatible then, and many AOSP partitions can not work fine with Sense Roms. If he did that then his cell might explode....
forgot about rils and didnt know about partitions.
but expoding cells are not to be taken lightly, especially when put in trouser pocket

[Q] Stuck on HTC logo after flashing custom rom

I have an HTC Desire HD.
I unlocked it
s-off
rooted
flashed with cwm recovery
installed from ZIP file on SDCARD
rebooted
stuck on HTC logo regardless of what I attempt.
I have no idea where to go from here.
Any ideas?
Thanks
did you made full wipe?
What ROM?....which version of cwm? These are important factors
ClockworkMod Recovery v 5.8.1.5
I have tried different ROMs, all end up with the same scenario
cm-10.1-20130301-unofficial -ace
cm-JellyTime_R17.zip
I hope this answer helps you help me
Can you access boot loader? If so , go to it and post results of "fastboot getvar all". Maybe running an ruu will get u back on track.
Yest, bootloader is accessible and I attempted an RUU and ended up with the same result.
I will post the results of getvar all when I get home, stuck in traffic now
Thanks
-----------------------------------------
Here is the result of getvar all:-
INFOversion: 0.5
INFOversion-bootloader: 2.00.0029
INFOversion-baseband: 26.14.04.28_M
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 3.13.0.0
INFOserialno: SH12CRX01945
INFOimei: 356299049756800
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9810000
INFOcidnum: HTC__Y13
INFObattery-status: good
INFObattery-voltage: 4172mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: fcef1579
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
finished. total time: 0.031s
Is this were it stops?
No one has any idea to what it could be, no need for an absolute solution, a mere possible or a reflection as to what I could have done wrong would be appreciated.
LOL
What can i say to you?
As you stated on very first post of yours where you mentioned that your device is S-OFF? then why "INFOsecurity: on" ??
Simply flash any custom rom then extract boot.img from that custom rom .zip file and flash it through fastboot using command "fastboot flash boot boot.img"
Afterwards it should boot normally. Recovery has no issue nor given rom as you've mentioned on your post. Just requires boot.img to be flashed as your device is S-ON! not S-OFF.
I read a little sarcasm in that LOL
Thanks for the valuable info, I will attempt that as soon as I get home.
I will give feedback as to how successful my attempt has been.
I have attempted the proposed solution and I got the following error:
failed (remote: signature verify fail)
I read that could have to do with the fact that my bootloader is locked again. I did run a while back fastbood oem lock.
oem unlock returns an error.
So I attempted with the htcdev unlock code.bin again and unlocked it.
I ran the boot.img as instructed again and this time it was a success although it gave me a scare with the 4 reboots it performed
Thanks for the help, the tip from dr.patron99 was very helpful.

Categories

Resources