Gentlemen,
I was playing with ROMs as I typically did in the past, when the phone is now stuck on the SAMSUNG logo. I reflashed the stock ROM for my i747Rogers device using ODIN. I had the PDA field with the ROM in it, and Autoreboot and F.Reset.Time checked. Hit start.
Everything went fine and it rebooted. IT's stuck........HELP?
I can get it into Download mode and ODIN will recognize. Now what??
Thanks
DSSKing
Help? I need this phone for work..... Just need to get into it with ANY rom...
If you can boot into recovery try wiping/factory reset from the boot menu. This happened to me a while back when flashing cm 10
dssking said:
Help? I need this phone for work..... Just need to get into it with ANY rom...
Click to expand...
Click to collapse
Worst case scenario, get riff jtag done. I brick my galaxy s captivate a few years ago and that fixed it. Basically they plug the motherboard into a computer and push the ROM onto it. If you're in Toronto, I had it done at Ming Wireless downtown.
I took it to Pacific Mall (for those not in Toronto, It's THEE place for tech). A gentleman did a key sequence consisting of
the home, power and volume buttons..... got it to boot.
Wish I knew what he did. Moving forward, it's on 4.1.1 and rooted, so it won't take the update from Rogers. What's recomended>? What ROM to go with? I don't want to run into this again........
Suggestions?? Thanks guys.
dssking said:
I took it to Pacific Mall (for those not in Toronto, It's THEE place for tech). A gentleman did a key sequence consisting of
the home, power and volume buttons..... got it to boot.
Wish I knew what he did. Moving forward, it's on 4.1.1 and rooted, so it won't take the update from Rogers. What's recomended>? What ROM to go with? I don't want to run into this again........
Suggestions?? Thanks guys.
Click to expand...
Click to collapse
Yes, I also try to understand why I have a hard brick in the same day after making a jtag.
Root and flash TWRP-openrecovery-2.6.3.0-d2can trwp flash slim bean 4.2 with kernel-dkp aosp43 2013-09-20 steady hard bricked after 4.3 and also try to slim bean and still a hard brick.
Suggestions, thank you
I'm working on it now. I updated the 4.1.1 Rogers to 4.1.2 (Why, I don't know), but it wiped out my recovery. And, I'm guessing the root
too. So, starting over. I just don't want to run into what happened yesterday.
I have not been able to have a screen and I am dead brick to another jtag still do it as an idea of what to do to get back in touch bootloader mode or if I have to make a third jtag.
The only forum on xda that's being repaired, to make a sd card but no picture still works.
I never had a problem before
I forgot to tell that everything was fine and I wanted to restart and I stayed with a black screen.
Related
So I was rockin' my 4.1 rom earlier and listening to music when my headphone cord got stuck on my chair and my phone fell off my desk to the ground. Everything was still going but my touch screen stopped working. I hit the unlock (power) button and it would show the correct unlock screen but I could not slide to unlock.
I pulled the battery and ever since then my phone would not boot. Stuck in boot loops, etc. I tried restoring from Nandroid (even back to my 4.0.4 image) and it would get stuck on unable to load /data at the end. I eventually went back and installed Nexus Toolkit 7.0 on my home pc and proceeded to load the stock 4.0.2 back on and root. However, it still is stuck in a boot loop. I'm now at a loss of what to do. My sd card has already been wiped and my phone is still not booting.
I'm at your mercy if anyone can give me any direction - please!
jedil1c1ous said:
So I was rockin' my 4.1 rom earlier and listening to music when my headphone cord got stuck on my chair and my phone fell off my desk to the ground. Everything was still going but my touch screen stopped working. I hit the unlock (power) button and it would show the correct unlock screen but I could not slide to unlock.
I pulled the battery and ever since then my phone would not boot. Stuck in boot loops, etc. I tried restoring from Nandroid (even back to my 4.0.4 image) and it would get stuck on unable to load /data at the end. I eventually went back and installed Nexus Toolkit 7.0 on my home pc and proceeded to load the stock 4.0.2 back on and root. However, it still is stuck in a boot loop. I'm now at a loss of what to do. My sd card has already been wiped and my phone is still not booting.
I'm at your mercy if anyone can give me any direction - please!
Click to expand...
Click to collapse
Try restoring using ODIN
the process wipes all data, but since you said its already wiped that shouldnt be a problem for you.
IF it still doesnt work, then it isnt software, but rather hardware, and you should probably go get that fixed
good Luck
Return To Stock Using Odin:
http://forum.xda-developers.com/showthread.php?t=1620036
I have Verizon GN, can I still use ODIN?
jedil1c1ous said:
I have Verizon GN, can I still use ODIN?
Click to expand...
Click to collapse
Yes you can still use ODIN,
as ODIN is software for samsung phones,
just make sure you use the zerizon file ratehr than the sprint..
or there could be dragons ahead
but there will always be a way to return to stock
Although, i would use this, because it is mostly aimed towards Verizon Users..
http://www.galaxynexusforum.com/forum/rescue-squad/4707-how-return-stock-using-odin-vzw-gsm.html
Sorry for assuming you had sprint..
I dont know what was going on in my head
I found the correct VZW version within XDA... thanks for the tip... I actually have it running right now (fingers crossed).
Good Luck,
hopefully you get your phone back online
Wolfbeef123 said:
Good Luck,
hopefully you get your phone back online
Click to expand...
Click to collapse
Unfortunately, even after using ODIN I'm stuck in the boot loop. It must be busted hardware. Guess I will have to use the Samsung warranty service. Stink.
jedil1c1ous said:
Unfortunately, even after using ODIN I'm stuck in the boot loop. It must be busted hardware. Guess I will have to use the Samsung warranty service. Stink.
Click to expand...
Click to collapse
If you got your phone from Verizon, try them first. Easier than dealing with Samsung directly
harveydent said:
If you got your phone from Verizon, try them first. Easier than dealing with Samsung directly
Click to expand...
Click to collapse
I actually bought it through Amazon and called them and they said go to Verizon even without the purchased insurance.
My phone looks mint though so I'm very hopeful that I will receive service from the Verizon store.
Does the lock icon show while looping? You might think about a shot in the microwave for 3 seconds (don't take me seriously.....well maybe)
good day.
chopper the dog said:
Does the lock icon show while looping? You might think about a shot in the microwave for 3 seconds (don't take me seriously.....well maybe)
good day.
Click to expand...
Click to collapse
I did flash lock it with ODIN... so the unlock icon does not show. It boots to the animation and then restarts after it shows for 5 seconds. I think the touch screen is malfunctioning and causing it to reboot.
Can you turn it off and then turn it on while holding volume down and up at the same time (i.e., can you boot into fastboot/bootloader?)
If so... it's not over yet.
However, if you dropped it it's probably hardware. But if you can get into the bootloader, at least you can lock it before bringing it in.
looks like your nand chip failed. had the same problem with my S2 and even a JTAG didnt fix it, had to send it to warranty to have the board replaced
So I managed to Brick my sprint version of the galaxy s3. Like an idiot I overlooked a rom and used the i9300 version instead of my model version(nood move). Anyway I can't turn my phone on AT ALL!! I tried putting in into download and recovery and I get nothing. How do i fix this?? Anyone???
If u can't get download mode or recovery than there is no help. Maybe a jig if u have one but I'm not sure if they even work for the s3.
Sent from Galaxy SIII
musclehead84 said:
If u can't get download mode or recovery than there is no help. Maybe a jig if u have one but I'm not sure if they even work for the s3.
Sent from Galaxy SIII
Click to expand...
Click to collapse
Ahhhh shyt! These new phones are harder to fix now, never had this problem before, but its like if mess up once with these new galaxy s3's thats it, whats the point of flashing roms when you chance it every time. Thanks though man looks like I'll have to call to get a new one.
jsmoof21 said:
Ahhhh shyt! These new phones are harder to fix now, never had this problem before, but its like if mess up once with these new galaxy s3's thats it, whats the point of flashing roms when you chance it every time. Thanks though man looks like I'll have to call to get a new one.
Click to expand...
Click to collapse
Its not a problem as long as you flash a rom FOR YOUR PHONE.....
Did you try this?
jsmoof21 said:
So I managed to Brick my sprint version of the galaxy s3. Like an idiot I overlooked a rom and used the i9300 version instead of my model version(nood move). Anyway I can't turn my phone on AT ALL!! I tried putting in into download and recovery and I get nothing. How do i fix this?? Anyone???
Click to expand...
Click to collapse
I thought I hard brick my sons phone and here is what I did: Worth a try at this point.
Take battery out and do NOT put it back in. Take SD card out. Plug phone into computer and attempt download mode. Mine booted right up with this method when it wouldn't with anything else. If it does flash the stock rom through Odin right away and you are good to go.
tyler1037 said:
I thought I hard brick my sons phone and here is what I did: Worth a try at this point.
Take battery out and do NOT put it back in. Take SD card out. Plug phone into computer and attempt download mode. Mine booted right up with this method when it wouldn't with anything else. If it does flash the stock rom through Odin right away and you are good to go.
Click to expand...
Click to collapse
I just tried that and no luck. sounds like u soft bricked it. I can't get it to turn on period. The only thing that turns on is the lcd light but only for 10 seconds then shuts off. Thanks for the help though!
If your getting a light, even temporary, I'd boot a tinycore Linux and see what mode its in for that 10 seconds
18th.abn said:
If your getting a light, even temporary, I'd boot a tinycore Linux and see what mode its in for that 10 seconds
Click to expand...
Click to collapse
I gave up an ordered a new one lol that's the only solution I could come up with
galaxy s3 softbrick
jsmoof21 said:
I gave up an ordered a new one lol that's the only solution I could come up with
Click to expand...
Click to collapse
hey jsmoof21 did you got you galaxy s3 back from sprint, im asking because my is softbrick and i need to know if i can bring mine to sprint and getting a replacement because my dont start up eather. thanks
bonao1851 said:
hey jsmoof21 did you got you galaxy s3 back from sprint, im asking because my is softbrick and i need to know if i can bring mine to sprint and getting a replacement because my dont start up eather. thanks
Click to expand...
Click to collapse
Do you get a screen at all? You say you're softbricked but you also say it doesnt start up. If you are really just softbricked then you have a screen too, in which case you'll just look like an ass going to sprint because they will see you fuucked with it and laugh you out the store. If you are hardbricked then you would have just a black screen. If you have a screen, do some reading like you shouldve done in the first place and fix it yourself.
bonao1851 said:
hey jsmoof21 did you got you galaxy s3 back from sprint, im asking because my is softbrick and i need to know if i can bring mine to sprint and getting a replacement because my dont start up eather. thanks
Click to expand...
Click to collapse
Mine was hard bricked and it couldn't be turned on period. If yours is soft brick then you should be able to get it back into download mode but you can't get it to turn on at all, then you have a hard brick. I went to sprint and got a brand new one because they couldn't fix it either. So unless they can fix it you will have to get a new one!
Also Hard Bricked.
18th.abn said:
If your getting a light, even temporary, I'd boot a tinycore Linux and see what mode its in for that 10 seconds
Click to expand...
Click to collapse
On the advice for taking the battery out and trying to get into download mode, I tried and now without my battery in I get my red light but still no luck on download mode. any advice like "tinylinux". Sorry not a noob but not a pro so whereever that middle area is is where I stand. Thanks in advance.
UNBRICK
Hi please follow these steps
1 download stock firmware below
http://forum.xda-developers.com/showthread.php?t=1737859
2 download clock work mod (CWM-Recovery-LTE-SGS3-Sprint-v5.zip) below
http://www.epiccm.org/2012/06/cwm-recovery-on-all-sgs3-lte-variants.html
3 copy the CWM recovery zip to ext sd card using some card reader trough a pc and insert the sd card into your SGS3.
4 now i still presume your phone is still booting but gets stuck at samsung boot screen. reboot to ODIN mode and flash the
CWM file downloaded earlier with "AUTOREBOOT" unchecked.
5 once the cwm is flashed remove the usb cable and remove battery, hold for a sec and put the battery back again.
6 Reboot to recovery VOL UP + HOME Button + POWER, you should boot to CWM.
7 do DATA WIPE 3 times
8 do CACHE WIPE 3 times
9 under advanced do DALVIK CAHCE WIPE 3 times
10 click on reboot, as soon as you do it the vibrates, remove battery as soon as it vibrates.
11 put the battery back again and boot to odin mode again
12 flash stock firmware with F.RESET and AUTO REBOOT checked
13 your phone should reboot,
14 wait for it
please let me know if it helped.
Please do as it says without step number 3
pvinodnayak said:
Hi please follow these steps
1 download stock firmware below
http://forum.xda-developers.com/showthread.php?t=1737859
2 download clock work mod (CWM-Recovery-LTE-SGS3-Sprint-v5.zip) below
http://www.epiccm.org/2012/06/cwm-recovery-on-all-sgs3-lte-variants.html
3 copy the CWM recovery zip to ext sd card using some card reader trough a pc and insert the sd card into your SGS3.
4 now i still presume your phone is still booting but gets stuck at samsung boot screen. reboot to ODIN mode and flash the
CWM file downloaded earlier with "AUTOREBOOT" unchecked.
5 once the cwm is flashed remove the usb cable and remove battery, hold for a sec and put the battery back again.
6 Reboot to recovery VOL UP + HOME Button + POWER, you should boot to CWM.
7 do DATA WIPE 3 times
8 do CACHE WIPE 3 times
9 under advanced do DALVIK CAHCE WIPE 3 times
10 click on reboot, as soon as you do it the vibrates, remove battery as soon as it vibrates.
11 put the battery back again and boot to odin mode again
12 flash stock firmware with F.RESET and AUTO REBOOT checked
13 your phone should reboot,
14 wait for it
please let me know if it helped.
Please do as it says without step number 3
Click to expand...
Click to collapse
DUDE THANK YOU SO MUCH OMG
I had same stuck at boot screen but could get odin download mode still this literally saved my phone thanks your awesome!
I Screwed Up
Hello All,
I wish my first post was not for the issue of a bricked phone but it seems like it might be.
I have the sprint samsung S3 and was installing the http://forum.xda-developers.com/showthread.php?t=1905676 Rom and something seems to not have gone right.
I got an error and when I went to restart my phone I get nothing...
Thanks for the help and if I have no options would anyone like to by a lovely almost new GS3?
Jonathan
jonathanod said:
Hello All,
I wish my first post was not for the issue of a bricked phone but it seems like it might be.
I have the sprint samsung S3 and was installing the http://forum.xda-developers.com/showthread.php?t=1905676 Rom and something seems to not have gone right.
I got an error and when I went to restart my phone I get nothing...
Thanks for the help and if I have no options would anyone like to by a lovely almost new GS3?
Jonathan
Click to expand...
Click to collapse
I think you may have flashed your Sprint GS3 with an international GSM GS3 ROM. I think you are not going to be able to recover from that.
m20120 said:
I think you may have flashed your Sprint GS3 with an international GSM GS3 ROM. I think you are not going to be able to recover from that.
Click to expand...
Click to collapse
why are people still doing this?
nicholaaaas said:
why are people still doing this?
Click to expand...
Click to collapse
Some people really should get an iPhone...
Sent from my SPH-L710 using xda app-developers app
WHYDavid said:
Some people really should get an iPhone...
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Totally agree.That or a motorola
Try YouTubeing QBKing77 on his video for bricked S3's
Good luck. There will be a way to unbrick. Just have to find the right method.
[JellyBombed S3 via XDA premium]
Hey folks,
I was trying to flash a custom kernel (Phenomenal Extreme 4.0) from Clockworkmod on a rooted stock 4.1.2 rom and kernel. I placed the zips on my sd card, then flashed, but it was unsuccessful. Then, when I rebooted from CWM's main menu, the phone went dead. Nothing worked, no buttons, no nothing. Any combination I tried failed, from a simple reboot, to reboot into recovery, to a reboot into download mode. Took battery out, and placed it back in, still nothing.
I'd appreciate any help you can give me! If there's anything like a factory cable, that is still better than nothing. I think I bricked it, and no warranty (Samsung's 3 month is quite short). When I plug the phone in, the laptop responds with a sound but it's not the usual sound when you dock the device. A balloon says that device driver installation failed. Then nothing happens. In any case, I rooted it and there's a flash counter of 1 on it, even if I'm running stock everything. Again, I appreciate any help!
seokhun said:
Hey folks,
I was trying to flash a custom kernel (Phenomenal Extreme 4.0) from Clockworkmod on a rooted stock 4.1.2 rom and kernel. I placed the zips on my sd card, then flashed, but it was unsuccessful. Then, when I rebooted from CWM's main menu, the phone went dead. Nothing worked, no buttons, no nothing. Any combination I tried failed, from a simple reboot, to reboot into recovery, to a reboot into download mode. Took battery out, and placed it back in, still nothing.
I'd appreciate any help you can give me! If there's anything like a factory cable, that is still better than nothing. I think I bricked it, and no warranty (Samsung's 3 month is quite short). When I plug the phone in, the laptop responds with a sound but it's not the usual sound when you dock the device. A balloon says that device driver installation failed. Then nothing happens. In any case, I rooted it and there's a flash counter of 1 on it, even if I'm running stock everything. Again, I appreciate any help!
Click to expand...
Click to collapse
What forum did you find that kernel? Hopefully it was made for d2tmo.
+Bound for Valhalla!
I just checked, it wasn't. It's actually made for the international version -- my fault. Oh crap, I'm totally screwed, aren't I? *rolling eyes and a long sigh*
http://forum.xda-developers.com/showthread.php?t=1917234 My question is, it failed regardless, and why would it die AFTER I reboot the phone? It should've died right when I tried to install it through CWM.
seokhun said:
I just checked, it wasn't. It's actually made for the international version -- my fault. Oh crap, I'm totally screwed, aren't I? *rolling eyes and a long sigh*
http://forum.xda-developers.com/showthread.php?t=1917234 My question is, it failed regardless, and why would it die AFTER I reboot the phone? It should've died right when I tried to install it through CWM.
Click to expand...
Click to collapse
Google jtag repair.
That's an expensive paper weight.
|When Emotion Goes Up, Logic Goes Down|
I made a Nandroid before messing around.
Once I do the JTAG repair, can I restore using that Nandroid after re-rooting and flashing CWM? The guy who will be doing the JTAG said that it's dangerous because there's a risk of bricking involved.
I would just restore things individually, personally. I don't know what you had on there, but is there anything that you can't restore some other way ?
That happened to me when i flash wromg kernel. And I had a panic attack...but I somehow manage to go into recovery mod....if you can go into recovery mod...have no fear back up is there lol
Just wipe everything and restore your backup.
Sent from my SGH-T999 using xda premium
Send it back
Sent from my SGH-T999 using xda premium
seshaz said:
Send it back
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Hopefully you can get odin to recognise it...
tdotdot said:
Hopefully you can get odin to recognise it...
Click to expand...
Click to collapse
I had the same problem when I first got my S3. I flashed a file that was for my S2 not realizing and the phone responded the same way or didnt respond at all. Im not saying this will work but you can try. Do the proper button combo to get into download. It wont show anything on your scrren but the phone could still be in download mode. Go ahead and try connecting it to your computer and see if odin will recognize it. Make sure you have your drivers installed and dont forget to push volume up to get all the way into download mode. It worked for me once before and I hope to never have to try it again. If you have already tried this then your out of luck and will have to jtag.
JTAG is no scam. It is a VERY reliable source! Go for it.
Sent from my Galaxy Nexus using xda premium
Never mind, warranty exchange. I don't want to send my phone to strangers, even if it's legitimate. Still $45-$60 on the credit card.
I have a question though, as long as the phone is under warranty, I can exchange for a replacement an unlimited number of times, right?
Warranty Exchange!
seokhun said:
Never mind, warranty exchange. I don't want to send my phone to strangers, even if it's legitimate. Still $45-$60 on the credit card.
I have a question though, as long as the phone is under warranty, I can exchange for a replacement an unlimited number of times, right?
Click to expand...
Click to collapse
Yes you can...I did it with my S2 until I got one that did'nt have any signs of being refurbished. It looked brand new! I have even told them that something was wrong with the phone (hardware issue) when there was nothing wrong just because the one year warranty was about to run out and it had a few cosmedic blemishes..I have given them a lot of money in the past 9 years so I do'nt feel too bad... I did it with my Vibrant as well.
I downloaded the Jedi Mind Trick JB 2 ROM and installed it via clocwork mod recovery .. That went fine but it took me a few days to realize I didnt have a working video camera anymore on my phone.. so I thought to flash a stock ROOTed rom instead...
Then I found this threat about an updated version of Jedi Mind Trick's ROM labled JB 3.. So I wiped as much as I could in recovery and chose to format all the options it gave me in recover , Format system , data , cache , emms(or something) .. and now when I boot the phone , it shows the first flash screen , and the samsung logo starts to shimmer then it reboots back to the splash screen and repeats this process everal times before just going black and sitting there..
So I've successfully bootlooped my phone doing this..
MY PROBLEM -- I don't know how to charge my phone or connect to it to install anything else..
Is this a serious problem? How can I charge my phone to continue troubleshooting it? It still has some battery to try some things but I don't know how to hook it up to transfer any other roms to it via USB cable and PC in it's current state..
I'm very computer savvy but I'm trying to learn this phone modding stuff and I realy hope I didn't brick my phone in this process.
Can someone please help me out here? I'll be on the forums religiously until I figure this out.
What should I start doing first??
Any help would be greatly appreciated!! Thanks!
still working at it
I think I'm at the point of having to use ODIN to flash a new rom since i cannot simply copy this rom to the sdcard to use clockwork to flash it .. Am I correct on this ?
For some reason this rom I found (should be stock rooted tmobile gSII rom) does not want to open from ODIN's PDA button cause its in .zip and not .tar or anything... I'm not sure how to flash this rom with ODIN ( I'm not even 100% sure this is how its supposed to go) Any suggestions ?
phew
UPDATE - So I managed to research enough to find out that there is no way to flash a CUSTOM rom with ODIN.. SO I had to download a stock (presumably rooted) t-mobile rom and flash THAT ...
Now I'm back up with a rooted rom and will begin re-installing clockwork and then my custom deodexed rooted rom afterward.
Thanks for all who almost kinda tried to care to reply in this past 2 hours =) -- As previously mentioned.. I am a nerd.. I just suck at phone modding. Haha
So , looks like I'm in the clear now and don't need any more support on this particular topic yet.
zarklon said:
UPDATE - So I managed to research enough to find out that there is no way to flash a CUSTOM rom with ODIN.. SO I had to download a stock (presumably rooted) t-mobile rom and flash THAT ...
Now I'm back up with a rooted rom and will begin re-installing clockwork and then my custom deodexed rooted rom afterward.
Thanks for all who almost kinda tried to care to reply in this past 2 hours =) -- As previously mentioned.. I am a nerd.. I just suck at phone modding. Haha
So , looks like I'm in the clear now and don't need any more support on this particular topic yet.
Click to expand...
Click to collapse
Is this true? Through a recommendation (haven't done anything to my phone from rooting/flashing KANGSJUGGERNAUT2 years ago), I tried to flash CM10 and ended up with a bootloop myself. Tried flashing through ODIN but it kept crashing; does anyone know why?
Afterward, I tried to reflash it through CWM and from then on bootloops into a installation process that never completes.
For some reason my CWM turned super slow, freezes/hangs and reboots after a few minutes.
I gave the phone to a friend who does this stuff on the regular but he said my initial flash wasn't complete cause in download mode says I'm still running official? No clue.
I was told this via email/chat: "No luck, it won't even boot anymore, I think I'll just bring it back tmrw morn
10:43 PM
Sorry I'm at a wedding (yea I know random) I left my phone with coat check
OK I've narrowed down the reason but not the solution, you had an AOKP based ROM which fundamentally is based on CyanogenMod, but it wasn't correctly flashed as the phone still thought it has factory ROMs still running
11:10 PM
Clockworkmod(even though it was working before) wasn't accessing the partitions of the phone correctly so it wasn't properly wiping or flashing properly.
11:12 PM
So basically from the first time you flashed cwm it didn't flash properly then the next time you flashed using the new recovery it didn't flash anything it was supposed to do itself properly , so basically it was a chain of events in addition to a bad boot loader, that's why it never went to recovery or download mode correctly
11:13 PM
That's something that had to do with the way the phone was built meaning you may of had a bad bootloader from the very begin and are now feeling the synptoms
Basically, and I would hate to be the reason or partially the reason you have a dead phone, basically it was a matter of coincedencr that it happened as this could of happened at anytime, once you have a bad boot loader its pretty much down hill from there"
Any helpful insight as how I can rectify this? is my phone truly dead? Sorry about the quoted format, it was copied and pasted.
If I were in your boat, I'd use Odin and flash the stock 4.1.2 ROM.
Sent from my Nexus 7 using Tapatalk 4 Beta
tronmech said:
If I were in your boat, I'd use Odin and flash the stock 4.1.2 ROM.
Sent from my Nexus 7 using Tapatalk 4 Beta
Click to expand...
Click to collapse
The phone won't turn on, unable to go into recovery and download mode; plugged in usb (hear connection beep but pressing power button plays disconnect button) to no avail. What can I do to unbrick?
Stock 4.1.2? Possible over a hardbricked T989 with old 2.3.6?
JahJahLoO said:
The phone won't turn on, unable to go into recovery and download mode; plugged in usb (hear connection beep but pressing power button plays disconnect button) to no avail. What can I do to unbrick?
Stock 4.1.2? Possible over a hardbricked T989 with old 2.3.6?
Click to expand...
Click to collapse
sorry but i have to assume that you are not doing the 3 button recovery or download mode right.
Pull battery, put battery back in, hold power button & Vol +/- untill you see SAMSUNG on the screen ---> let go off power button(keep holding
Vol +/- button) .....u will see recovery. (assuming you did flash cwm before).
Let me know.
hit thanks.
sam.balia1012 said:
sorry but i have to assume that you are not doing the 3 button recovery or download mode right.
Pull battery, put battery back in, hold power button & Vol +/- untill you see SAMSUNG on the screen ---> let go off power button(keep holding
Vol +/- button) .....u will see recovery. (assuming you did flash cwm before).
Let me know.
hit thanks.
Click to expand...
Click to collapse
I believe I am doing it correct, I have been entering recovery and download mode many times, right before I soft bricked it.
And sorry, no, I've tried many times, many methods and my phone is confirmed as entirely hard bricked.
SUPAR SAD, but thank you!
dont give up
JahJahLoO said:
I believe I am doing it correct, I have been entering recovery and download mode many times, right before I soft bricked it.
And sorry, no, I've tried many times, many methods and my phone is confirmed as entirely hard bricked.
SUPAR SAD, but thank you!
Click to expand...
Click to collapse
you can try using adb and put the phone in dl mode.
sometimes its as easy as pull battery and wait awhile (20 min or more) and try again.
if you've exhausted all possibilities, you can use a jig to force a dl mode.
let me know
sam.balia1012 said:
you can try using adb and put the phone in dl mode.
sometimes its as easy as pull battery and wait awhile (20 min or more) and try again.
if you've exhausted all possibilities, you can use a jig to force a dl mode.
let me know
Click to expand...
Click to collapse
I don't know what adb is, or how to use it; I have, however seen my friend RDP to my desktop and do something and used the term 'adb' in his attempt to code through the phone.
I've done that battery waiting period, for nearly an hour and still no result.
After doing some researching, I have found that many people have stated a USB JIG would not be applicable to a 'hard bricked' phone. I really wanted to try as it looked like the most, simple and inexpensive solution.
JahJahLoO said:
I don't know what adb is, or how to use it; I have, however seen my friend RDP to my desktop and do something and used the term 'adb' in his attempt to code through the phone.
I've done that battery waiting period, for nearly an hour and still no result.
After doing some researching, I have found that many people have stated a USB JIG would not be applicable to a 'hard bricked' phone. I really wanted to try as it looked like the most, simple and inexpensive solution.
Click to expand...
Click to collapse
If you know for a fact that you bricked your s2, maybe wrong rom or kernel that u flashed by accident then.....
contact these guys.... http://brickedmyphone.com/contact-me/
good like and click thanks if you agree.
sam.balia1012 said:
If you know for a fact that you bricked your s2, maybe wrong rom or kernel that u flashed by accident then.....
contact these guys.... http://brickedmyphone.com/contact-me/
good like and click thanks if you agree.
Click to expand...
Click to collapse
Lols, you're really fishing for them "Thanks"; you got it buddy. Very swift responses. :cyclops:
Anyway, I'm still searching the net for anymore possible solutions.
Thanks.
JahJahLoO said:
Lols, you're really fishing for them "Thanks"; you got it buddy. Very swift responses. :cyclops:
Anyway, I'm still searching the net for anymore possible solutions.
Thanks.
Click to expand...
Click to collapse
fishing for them ???????
what the hell does that even mean? it seems that brick did hit u in the head!!!
sam.balia1012 said:
fishing for them ???????
what the hell does that even mean? it seems that brick did hit u in the head!!!
Click to expand...
Click to collapse
It might as well have... :crying:
Hi friends!!
After my S4 decided to run away without insurance I had to revert back to my s2. It still had Hellybean on it so I upgraded it to PA 4.45 just to check it out on my phone. Then I went into the instructions on how to unlock the phone. I went to revert it back to stock ICS that it came with to do so and when I rebooted it gets stuck at the samsung logo that pulses. I can't get into recovery but I still can get into download mode but nothing works when flashed. I tried using ODIN for every stock ROM available and still nothing. I never bricked a phone before and this doesn't seem like one to me since the bricks I fixed before have never been able to go into DL mode without being jigged, Can somebody help me. I need this running asap for medical reasons. I'm a sitting duck without this phone if something should happen to me. I live alone and have no land line if I need to call 911.
ScottPomroy said:
Hi friends!!
After my S4 decided to run away without insurance I had to revert back to my s2. It still had Hellybean on it so I upgraded it to PA 4.45 just to check it out on my phone. Then I went into the instructions on how to unlock the phone. I went to revert it back to stock ICS that it came with to do so and when I rebooted it gets stuck at the samsung logo that pulses. I can't get into recovery but I still can get into download mode but nothing works when flashed. I tried using ODIN for every stock ROM available and still nothing. I never bricked a phone before and this doesn't seem like one to me since the bricks I fixed before have never been able to go into DL mode without being jigged, Can somebody help me. I need this running asap for medical reasons. I'm a sitting duck without this phone if something should happen to me. I live alone and have no land line if I need to call 911.
Click to expand...
Click to collapse
Are you trying to boot into recovery while you are plugged into a computer?
Sent from my SGH-T989
jrc2 said:
Are you trying to boot into recovery while you are plugged into a computer?
Sent from my SGH-T989
Click to expand...
Click to collapse
Of course not. But I think the problem may be that I didn't know that Kies was still installed in this computer.
And removing Kies didn't work either. I was talking to a guy that does jtag repair near me he said try that first. Gave me a pit file and it didn't help.
ScottPomroy said:
Of course not. But I think the problem may be that I didn't know that Kies was still installed in this computer.
And removing Kies didn't work either. I was talking to a guy that does jtag repair near me he said try that first. Gave me a pit file and it didn't help.
Click to expand...
Click to collapse
Here is something something that has worked for me twice. Use JOdin3 ( https://builds.casual-dev.com/jodin3/) Plug your phone in before going to the websute and put the TWRP tar file in PDA. Click start. It will say it needs to obtain a pit file. Click OK. Ignore the part about using in the download mode combo. It should bootloop your phone and you then might be able to unplug your phone and boot into recovery. I use this as a last resort but it has worked twice for me.
Sent from my SGH-T989