Hey folks,
I was trying to flash a custom kernel (Phenomenal Extreme 4.0) from Clockworkmod on a rooted stock 4.1.2 rom and kernel. I placed the zips on my sd card, then flashed, but it was unsuccessful. Then, when I rebooted from CWM's main menu, the phone went dead. Nothing worked, no buttons, no nothing. Any combination I tried failed, from a simple reboot, to reboot into recovery, to a reboot into download mode. Took battery out, and placed it back in, still nothing.
I'd appreciate any help you can give me! If there's anything like a factory cable, that is still better than nothing. I think I bricked it, and no warranty (Samsung's 3 month is quite short). When I plug the phone in, the laptop responds with a sound but it's not the usual sound when you dock the device. A balloon says that device driver installation failed. Then nothing happens. In any case, I rooted it and there's a flash counter of 1 on it, even if I'm running stock everything. Again, I appreciate any help!
seokhun said:
Hey folks,
I was trying to flash a custom kernel (Phenomenal Extreme 4.0) from Clockworkmod on a rooted stock 4.1.2 rom and kernel. I placed the zips on my sd card, then flashed, but it was unsuccessful. Then, when I rebooted from CWM's main menu, the phone went dead. Nothing worked, no buttons, no nothing. Any combination I tried failed, from a simple reboot, to reboot into recovery, to a reboot into download mode. Took battery out, and placed it back in, still nothing.
I'd appreciate any help you can give me! If there's anything like a factory cable, that is still better than nothing. I think I bricked it, and no warranty (Samsung's 3 month is quite short). When I plug the phone in, the laptop responds with a sound but it's not the usual sound when you dock the device. A balloon says that device driver installation failed. Then nothing happens. In any case, I rooted it and there's a flash counter of 1 on it, even if I'm running stock everything. Again, I appreciate any help!
Click to expand...
Click to collapse
What forum did you find that kernel? Hopefully it was made for d2tmo.
+Bound for Valhalla!
I just checked, it wasn't. It's actually made for the international version -- my fault. Oh crap, I'm totally screwed, aren't I? *rolling eyes and a long sigh*
http://forum.xda-developers.com/showthread.php?t=1917234 My question is, it failed regardless, and why would it die AFTER I reboot the phone? It should've died right when I tried to install it through CWM.
seokhun said:
I just checked, it wasn't. It's actually made for the international version -- my fault. Oh crap, I'm totally screwed, aren't I? *rolling eyes and a long sigh*
http://forum.xda-developers.com/showthread.php?t=1917234 My question is, it failed regardless, and why would it die AFTER I reboot the phone? It should've died right when I tried to install it through CWM.
Click to expand...
Click to collapse
Google jtag repair.
That's an expensive paper weight.
|When Emotion Goes Up, Logic Goes Down|
I made a Nandroid before messing around.
Once I do the JTAG repair, can I restore using that Nandroid after re-rooting and flashing CWM? The guy who will be doing the JTAG said that it's dangerous because there's a risk of bricking involved.
I would just restore things individually, personally. I don't know what you had on there, but is there anything that you can't restore some other way ?
That happened to me when i flash wromg kernel. And I had a panic attack...but I somehow manage to go into recovery mod....if you can go into recovery mod...have no fear back up is there lol
Just wipe everything and restore your backup.
Sent from my SGH-T999 using xda premium
Send it back
Sent from my SGH-T999 using xda premium
seshaz said:
Send it back
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Hopefully you can get odin to recognise it...
tdotdot said:
Hopefully you can get odin to recognise it...
Click to expand...
Click to collapse
I had the same problem when I first got my S3. I flashed a file that was for my S2 not realizing and the phone responded the same way or didnt respond at all. Im not saying this will work but you can try. Do the proper button combo to get into download. It wont show anything on your scrren but the phone could still be in download mode. Go ahead and try connecting it to your computer and see if odin will recognize it. Make sure you have your drivers installed and dont forget to push volume up to get all the way into download mode. It worked for me once before and I hope to never have to try it again. If you have already tried this then your out of luck and will have to jtag.
JTAG is no scam. It is a VERY reliable source! Go for it.
Sent from my Galaxy Nexus using xda premium
Never mind, warranty exchange. I don't want to send my phone to strangers, even if it's legitimate. Still $45-$60 on the credit card.
I have a question though, as long as the phone is under warranty, I can exchange for a replacement an unlimited number of times, right?
Warranty Exchange!
seokhun said:
Never mind, warranty exchange. I don't want to send my phone to strangers, even if it's legitimate. Still $45-$60 on the credit card.
I have a question though, as long as the phone is under warranty, I can exchange for a replacement an unlimited number of times, right?
Click to expand...
Click to collapse
Yes you can...I did it with my S2 until I got one that did'nt have any signs of being refurbished. It looked brand new! I have even told them that something was wrong with the phone (hardware issue) when there was nothing wrong just because the one year warranty was about to run out and it had a few cosmedic blemishes..I have given them a lot of money in the past 9 years so I do'nt feel too bad... I did it with my Vibrant as well.
Related
During an attempt to flash a rom using odin to my rooted sgs2, odin crashed and closed before it was finished. I tried restarting odin, wouldnt see phone.
Removed battery from phone, reconnected to odin and tried using the one click odin to reflash back to stock. Also tried using odin with other roms to flash back.
Heres my problem.
When i power on the phone, it says the Galazy S2 i9100 for a few seconds, then just turns off.
I can open odin, or odin one click, plug in phone, shows me yellow w/com and added. I click start, it gets to Setupconnection and then just sits there.
I have tried
- Different roms and both one click and normal odin.
- Different usb cables
- Different usb ports
- Multiple computers
Is there any way to get past this? God i hope someone can either point me somewhere or help me out.
Reinstall Samsung Kies to your laptop or pc so the proper drivers are re-installed. Once complete with that install, plug your phone into the pc and put the phone into USB mode, hopefully the pc will recognize your phone and install the NEW DEVICE drivers after a few moments. Depending on your pc, sometimes it takes many seconds for your pc to recognize and bring up the drop down menu for the newly recognized drive. BE PATIENT. If the pc does recognize your phone, start Odin again. If Odin also see's your phone, which it now should, you should see a COM:# connection in the ID:COM box of Odin. Doesn't matter what COM # is, as long as something is there. You can now use Odin because it see's your phone. Once you start Odin flashing, make sure not to disconnect anything until you see the upper left GREEN PASS box in Odin. Once its GREEN with PASS in that box, you're finished. You can d/c your phone from the pc and the phone is probably rebooting anyway.
OFC, if your phone will not stay power'd up, all of the above is for nought. Wish I could be more helpful.
Keep in mind that I do not intend to insult intelligence but everyone has limits in experience and I always try to explain in the simplest way I can. No disrespect intended.
Good Luck!
R
Thanks for the reply,
How am i supposed to put the phone in usb mode when i cant boot it?
That does create a problem, I would do some research on a USB Jig for your phone. Search at eBay for: Samsung Galaxy S2 Epic 4G Touch USB Jig
I'm not sure if this will help a phone that will not power up but it does have its uses for Root'd phone especially using Odin to flash and to remover that nasty YELLOW Triangle that comes from ROOT ROMS that are unsign'd.
Wish I could help you further.
R
Scribes said:
Thanks for the reply,
How am i supposed to put the phone in usb mode when i cant boot it?
Click to expand...
Click to collapse
Try to put in download mode if not try a jig ... If that fails it's sprint or jtag
Sent from my SPH-D710 using xda premium
It does power on, basically shows the sgs boot logo (black backgroud w/ white text) then goes dark, but its actually still on cause it gets hot.
I can get it into download mode and i can get it into the android recovery.
Theres gotta be a way to recover with an update.zip from the android recovery via the sd card........
There you go, you have two of us saying about the same thing. Just make sure you get the correct JIG if you go that route. It's like $2.00 and arrives from China in like 2 weeks.
http://www.ebay.com/sch/i.html?_fro...e+for+Samsung+Galaxy+S2/i9100/i9000/T959/i897
---------- Post added at 09:41 AM ---------- Previous post was at 09:37 AM ----------
humm, an idling phone shouldn't get hot. That tells me you've got something going on. I think you just progress'd passed my pay grade my friend.
Heres another thing, as i mentioned in my first post.
The boot logo says i-9100....
and this is a sprint phone, isnt it a d710?
So im gussing in my late night haze i screwed myself by loading an i9100 rom/bootloader/whatever the hell that is.
Samsung calls it: I9100
Sprint calls it: SPH710
We call it: Epic 4G Touch
I see, so thats not the problem?
Im just gonna keep posting here while i mess with this incase i trigger someones mind for a fix.
(picture was here apparently i cannot post an external link yet. Was just a picture of device manager and odin sitting at SetupConnection)
The only way to get odin to see my phone, is if i open odin, put phone in download mode, plug phone in, then uninstall the com port via device manager, reinstall it. When i rescan for hardware changes, odin goes yellow as seen in the picture, i click start, then it sits at SetupConnection all day, so im guessing its losing the connection after it finds it.
My only solution here is via usb card i think, but i cant find a signed package. Cant someone just pull theirs from a stock phone? Why wouldnt that work?
Well, if you can get Odin to work, unroot to full stock with this:
http://www.megaupload.com/?d=ISD9AOP0
Right, getting odin to work is the real problem though i think.
Stuck at SetupConnection forever
This is super frustrating... going without a phone is impossible, work emails, texts, calls, ahhhh
..and there is no way to completely reload the entire phone using an update.zip off the sd card, one that is signed?
I know i used to do that on my droid, and all though i know this is a totally different game, i still have android recovery, one would think it would be possible if the package was signed. unsigned ones just fail, but at least i can attempt to run them from there.
If someone can find a way to do that, and it works for my phone, i will paypal $50
Let me see what I can find for ya....
I have searched two different Forums for a flashable unroot to stock with NO luck. Everything I found requires Odin. Sorry Buddy.
Correct me if I'm wrong but isn't the i-9100 a whole different phone??? Looking at the specs and release date I would believe so. Sounds like he did an ics update for a phone that wasn't the Sph-d710 or something..
http://www.gsmarena.com/samsung_i9100_galaxy_s_ii-3621.php
Sent from my SPH-D710 using XDA App
not sure, all I know it by is: SPH 710
~ via My Epic 4G Touch & XDA'a app ~
Have you tried just flashing a kernel only in Odin
Sent from my SPH-D710 using xda premium
You tried flashing ICS on your phone, didn't you? B/C I'm pretty sure that's why you are seeing I9100 while booting up. If that is the case, do a search here as there are multiple people who have done this, and none of them have been able to fix it.
Sorry, your only solution is exchange at Sprint if you can, or JTAG.
help
beezar said:
You tried flashing ICS on your phone, didn't you? B/C I'm pretty sure that's why you are seeing I9100 while booting up. If that is the case, do a search here as there are multiple people who have done this, and none of them have been able to fix it.
Sorry, your only solution is exchange at Sprint if you can, or JTAG.
Click to expand...
Click to collapse
does not mean he flashed ICS when you odin a kernel that is not signed ie with CWM you will get yellow triangle and it will say i9100 too ..... so does not mean he flashed ics ... if odin sees the phone on a com port he probably didnt .... try flashing a working kernel from our phone
I did attempt to flash ICS. I could find where i got it, but it was supposedly for the Epic 4G touch, aka sprint sgs2 variant.
I am a network and systems admin, i should have known better. I jumped the gun and got ahead of myself. I have rooted and put roms on the og droid, and the droid x, samsung is a different beast all together.
However, i went in to sprint the day after i did this, they looked at it, no insurance, no replacement warranty, they didnt ask me anything, and THEY determined it was a factory defect , they had me sign a sheet that said "After researching found phone to be a factory defect and the solution from SPRINT is to replace the phone. $37.41, and 22 hours later i had a brand new SGS2 in my hand.
They hadnt sent my phone in yet. I honestly am not sure if they are going to be able to tell if i did anything to it or not, i may have just hosed the bootloader enough that odin wont connect, so they probably will have to use something like jtag in house to reflash it, or replace the chip or whatever they do. Even so, if they do see that i was messing with it, and say it voided my warranty, i have a signed receipt showing my payment and agreeing to pay for the replacement at $37.41, and that THEY determined the flaw. My brother in law is a lawyer, so i asked him, because i was curious if they would look at my phone at the service center or hub or whatever, and determine it was my fault. He assured me they could try, but it would all fall back to the employee who had me sign the agreement, so even if they dont like what i did, they are beyond doing anything about it.
I doubt they will even notice it, im sure they will try to boot it, then just flash it or however they do it.
Either way, im not worried anymore.
So...someone wanna point my idiot ass to an actual good rom, with a good method, that works for my phone? lol. I cant stand touchwiz, huge icons and cant replace them ....wtf is that all about.
I've done some research on this and haven't found and answer, so im putting it out there for you guys to get at me and let me know. I have been experiencing Rolling restarts on my phone. The phone will boot up fully, but randomly it will just restart it self. At times if I just push the power button, to turn of the screen, the phone will restart again. The phone also has an issue of staying in black and not coming back on, so I have to take the battery out in order for me to get it back to boot up.
Notes:
Im running EL29 Stock. Nothing special at all.
If there is a thread already created for this, I apologize, but ive looked and I couldn't find it.
I'm experiencing something similar except i'm running AGAT's tFH13 rom and kernel.
Every time I get the phone into recovery or even download mode, the phone just reboots itself.
Out of curiosity I opened the mobile odin app and it gave me an error saying it could not detect the device model. -_-
bas85 said:
I've done some research on this and haven't found and answer, so im putting it out there for you guys to get at me and let me know. I have been experiencing Rolling restarts on my phone. The phone will boot up fully, but randomly it will just restart it self. At times if I just push the power button, to turn of the screen, the phone will restart again. The phone also has an issue of staying in black and not coming back on, so I have to take the battery out in order for me to get it back to boot up.
Notes:
Im running EL29 Stock. Nothing special at all.
If there is a thread already created for this, I apologize, but ive looked and I couldn't find it.
Click to expand...
Click to collapse
Can you dump a logcat and attach?
(From ADB Shell)
Code:
logcat -d -f /sdcard/logdump.txt
Might help explain what's going on.
bas85 said:
I've done some research on this and haven't found and answer, so im putting it out there for you guys to get at me and let me know. I have been experiencing Rolling restarts on my phone. The phone will boot up fully, but randomly it will just restart it self. At times if I just push the power button, to turn of the screen, the phone will restart again. The phone also has an issue of staying in black and not coming back on, so I have to take the battery out in order for me to get it back to boot up.
Notes:
Im running EL29 Stock. Nothing special at all.
If there is a thread already created for this, I apologize, but ive looked and I couldn't find it.
Click to expand...
Click to collapse
That's pretty odd, I don't think I've ever heard of something like that happening unless there was something physically wrong with your phone.. have you ever tried to use Odin to reinstall a stock Rom? & out of curiosity do you have an antivirus app?
I did the Reflash back to stock through odin. Took it to sprint this morning though and found that it was a bad battery. So easy fix but annoying problem.
And with that being said, It did it to me again! Guess that wasn't the issue.
j7jman said:
That's pretty odd, I don't think I've ever heard of something like that happening unless there was something physically wrong with your phone.. have you ever tried to use Odin to reinstall a stock Rom? & out of curiosity do you have an antivirus app?
Click to expand...
Click to collapse
I have used Odin to reinstall a stock rom before. I do have an Antivirus app called Lookout. It might be something physically wrong with the phone at this point im not sure what to do.
*update* Just took it back to sprint and they replaced it for me for free. Went from black to white
I've been trying to flash it back to stock to take it to sprint but my phone just keeps rebooting even whilst in recovery mode. :-\
Sent from my cm_tenderloin using Tapatalk 2
bas85 said:
*update* Just took it back to sprint and they replaced it for me for free. Went from black to white
Click to expand...
Click to collapse
How long have you had your phone? I am having the exact same issues. My 1 year Samsung warranty expires on the 15th...
Was your phone rooted when you brought it in?
twoslo said:
I've been trying to flash it back to stock to take it to sprint but my phone just keeps rebooting even whilst in recovery mode. :-\
Sent from my cm_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
I would say keep trying. Mine was doing that too but it finally held out long enough once to not restart on me. What I did was i just tapped the screen ever 10-15 seconds. Not sure if that did anythign or if I was lucky but It made it through.
MoMatt said:
How long have you had your phone? I am having the exact same issues. My 1 year Samsung warranty expires on the 15th...
Was your phone rooted when you brought it in?
Click to expand...
Click to collapse
I had my phone for less than a year. I had a sprint warranty and the Samsung 1 year warranty. Both covered this issue with no problem. I suggest taking it in if you cant find a solution to the problem. But if your rooted. Flash back to stock.
I was able to restore to a previous backup. From there i got Mobile Odin working and was able to flash the FH13 OTA, rooted though. I still can't get the power button to work and its still randomly rebooting but not as often. Still trying to get the phone to STAY in download mode to flash to stock(unrooted) with Odin.
twoslo said:
I was able to restore to a previous backup. From there i got Mobile Odin working and was able to flash the FH13 OTA, rooted though. I still can't get the power button to work and its still randomly rebooting but not as often. Still trying to get the phone to STAY in download mode to flash to stock(unrooted) with Odin.
Click to expand...
Click to collapse
You can possibly take the "risk" but I took mine that was a Rooted Stock version, and it passed their software test, so they gave me the new phone. Also if its rebooting as much or as fast as mine was, Its hard for them to even run a real test because the phone wont give them a chance to. Its up to you tho to make that decision.
Finally got the phone to stay in download mode and i was able to flash the Unrooted FF18 OC.
Reboots are fewer now but power button still doesn't work. I checked my account and my phone is still under 1 year warranty & i have the insurance. I'll be heading to sprint after work today.
Thanks for your tips and replies. :good:
Same issue. The power button on this phone is iffy. At least i think that's the problem
Swyped from a Galaxy S2 on CM10
update : they are replacing my phone because the power button is broken
It's gonna be a few days till I get the new one, tech says they are back ordered?
The stability and shutdown issues for me seem to be caused by a bad battery. Brought it into Sprint and they gave me a new one, no charge. Seems to have solved the problem.
Ok, so I searched high and low and saw nothing about anyone who couldn't get there GS3 to boot at all . . .
So My rogers I747M was succesfully rooted with Odin root not trip. And then i flashed It with the generic rooted jelly bean ROM. Successful again everything seemed fine. So i was confident in shooting for CM10(even though ive had troubles in the past) And i put the zip. in the sd and booted into CWM recovery and did a factory reset, cache and dalvik. Went to install CM10 from sd and it gave me error 7. so i reboot device and loaded into the stock rooted jellybean again to try and put another fill in the SD. Tried booting into recovery again. Now nothing at all, I have tried pulling the battery, even for hours. And then button combos..Nothing. Leaving cord in with battery out,button combos,battery in...Nothing
I'm afraid of the worst ATM, i had the unbrickable Captivate before this with my JIG and all, I'd did this to that phone, but the JIG saved me.
So the phone doesn't boot and you can't enter recovery?
The error 7 was cause by you not having the latest version of cwm.
Now for the brick part: try pulling out the battery, put it back and do the button com to enter recovery , old it for like ten seconds. Then plug it to your computer to see if Odin dectects it.
Once you tried it give me some feedback and I will check for further help. But if you are sure you didn't flash a wrong ROM for your device or a wrong kernel. The error 7 shouldn't have bricked your phone
Sent from my SGH-I747 using xda app-developers app
liltitiz said:
So the phone doesn't boot and you can't enter recovery?
The error 7 was cause by you not having the latest version of cwm.
Now for the brick part: try pulling out the battery, put it back and do the button com to enter recovery , old it for like ten seconds. Then plug it to your computer to see if Odin dectects it.
Once you tried it give me some feedback and I will check for further help. But if you are sure you didn't flash a wrong ROM for your device or a wrong kernel. The error 7 shouldn't have bricked your phone
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Still No luck, whenever i try to plug it in the computer, it just gives me three quick "DUH_DUH_DUH"s as is to tell me the computer failed to recognize. I'm afraid i may have to take it back to rogers, it's not two weeks old yet so perhaps ill get away with defective, i wonder if they deem that sort of thing in store or at the depot. Because i know they wont get it too boot there, so if they did it in store perhaps ill just get an exchange
Yeah go ahead with the replacement they will not check into it. Worst case scenario, they will fix it and send it back to you
Sent from my SGH-I747 using xda app-developers app
And luckily i woke up early this morning with confidence that I could spill some crazy story that made it sound like it overheated and died, and now I've got a new one, best be careful with this, i think im going to stay away from CM10, its killed 2 phones of mine lol, I believe any answer i will get will say that it was a user error thanks anyway !!!
I was making a TWRP Backup when all of the sudden my phone just randomly turns off. I grabed my phone and it was really hot. Tried turning it on, but nothing happened. Then I connected it to the ac adapter and it turned on, but it would go to the LG logo, the screen turns black then it restarts. This does not stop unless I unplug it. I had previously made two backups before and nothing like this happened, but this time I enabled conpression<-------- This must have been what caused this. All I want to know is if this can be fixed or not. If it could be fixed I would be so happy if somone could tell me how to fix this. THANK YOU. P.S. THIS PHONE IS A BEAST. D
cgtrr34 said:
I was making a TWRP Backup when all of the sudden my phone just randomly turns off. I grabed my phone and it was really hot. Tried turning it on, but nothing happened. Then I connected it to the ac adapter and it turned on, but it would go to the LG logo, the screen turns black then it restarts. This does not stop unless I unplug it. I had previously made two backups before and nothing like this happened, but this time I enabled conpression<-------- This must have been what caused this. All I want to know is if this can be fixed or not. If it could be fixed I would be so happy if somone could tell me how to fix this. THANK YOU. P.S. THIS PHONE IS A BEAST. D
Click to expand...
Click to collapse
Can you boot into recovery and restore a previous backup?
Sent from my LG-LS970 using Tapatalk 2
cowfodder said:
Can you boot into recovery and restore a previous backup?
Sent from my LG-LS970 using Tapatalk 2
Click to expand...
Click to collapse
It does not let me go into recovery, the screen goes black then restarts. All I can do is go into fastboot and Download mode.
cgtrr34 said:
It does not let me go into recovery, the screen goes black then restarts. All I can do is go into fastboot and Download mode.
Click to expand...
Click to collapse
Likely bricked. Do you have flashing notification and capacitive lights? Have you LGNPST'd? If yes to both of those questions, you're in the same predicament as I was and hopefully you have insurance, because your phone is fried.
xboxfanj said:
Likely bricked. Do you have flashing notification and capacitive lights? Have you LGNPST'd? If yes to both of those questions, you're in the same predicament as I was and hopefully you have insurance, because your phone is fried.
Click to expand...
Click to collapse
I do have flashing notification and capacitive lights. But I don't know what LGNPST is.(sorry I'm new to this) this is my first android phone
cgtrr34 said:
I do have flashing notification and capacitive lights. But I don't know what LGNPST is.(sorry I'm new to this) this is my first android phone
Click to expand...
Click to collapse
Sounds like you are toast. Take it to Sprint and have em swap it out for ya. Hopefully you either have insurance or are within your 14-days to return it.
xboxfanj said:
Sounds like you are toast. Take it to Sprint and have em swap it out for ya. Hopefully you either have insurance or are within your 14-days to return it.
Click to expand...
Click to collapse
Will they swap a rooted and unlocked phone?
cgtrr34 said:
Will they swap a rooted and unlocked phone?
Click to expand...
Click to collapse
Sprint's policy on root is to document it but not do anything about it, so they would swap it. If you're worried, I can help you restore stock firmware.
xboxfanj said:
Sprint's policy on root is to document it but not do anything about it, so they would swap it. If you're worried, I can help you restore stock firmware.
Click to expand...
Click to collapse
How could I restore it to stock firmware. And also thank you for replying back and helping me out
cgtrr34 said:
How could I restore it to stock firmware. And also thank you for replying back and helping me out
Click to expand...
Click to collapse
I will PM you about that since it is against forum rules and perhaps laws to post copyrighted stuff here.
xboxfanj said:
I will PM you about that since it is against forum rules and perhaps laws to post copyrighted stuff here.
Click to expand...
Click to collapse
OK thank You so much!
cgtrr34 said:
I was making a TWRP Backup when all of the sudden my phone just randomly turns off. I grabed my phone and it was really hot. Tried turning it on, but nothing happened. Then I connected it to the ac adapter and it turned on, but it would go to the LG logo, the screen turns black then it restarts. This does not stop unless I unplug it. I had previously made two backups before and nothing like this happened, but this time I enabled conpression<-------- This must have been what caused this. All I want to know is if this can be fixed or not. If it could be fixed I would be so happy if somone could tell me how to fix this. THANK YOU. P.S. THIS PHONE IS A BEAST. D
Click to expand...
Click to collapse
WTF!!!!! I just bricked my phone in less then 24 hours of owning it. I just rooted and unlocked it and right after making a TWRP Backup and rebooting my phone wouldn't turn on and it was HOT AS HELL!!
I got it exchanged at Best Buy but now im scared to do anything with it.
shook187 said:
WTF!!!!! I just bricked my phone in less then 24 hours of owning it. I just rooted and unlocked it and right after making a TWRP Backup and rebooting my phone wouldn't turn on and it was HOT AS HELL!!
I got it exchanged at Best Buy but now im scared to do anything with it.
Click to expand...
Click to collapse
Same happened to me. The phone overheats in recovery, so do what you need to do and then get out of it.
xboxfanj said:
Same happened to me. The phone overheats in recovery, so do what you need to do and then get out of it.
Click to expand...
Click to collapse
Im on the new phone and Im using clockwork and all is fine so far. I definitely suggest guys stop using twrp.
Sent from my LG-LS970 using XDA Premium HD app
Restore to stock when stuck at LG logo screen
xboxfanj said:
I will PM you about that since it is against forum rules and perhaps laws to post copyrighted stuff here.
Click to expand...
Click to collapse
Would you please help me out to restore to stock from a stuck LG logo screen? I can't even boot into fastboot or recovery. I tried LGNPST number of tries with different .bin files with no luck. I also tried a lot of diff things, too. Please email me at [email protected]. Thank you very much!
phatjulie said:
Would you please help me out to restore to stock from a stuck LG logo screen? I can't even boot into fastboot or recovery. I tried LGNPST number of tries with different .bin files with no luck. I also tried a lot of diff things, too. Please email me at [email protected]. Thank you very much!
Click to expand...
Click to collapse
I suggest you TEP it.
Sent from my LG-LS970 using xda premium
phatjulie said:
Would you please help me out to restore to stock from a stuck LG logo screen? I can't even boot into fastboot or recovery. I tried LGNPST number of tries with different .bin files with no luck. I also tried a lot of diff things, too. Please email me at [email protected]. Thank you very much!
Click to expand...
Click to collapse
Pull battery using a torx t5 screwdriver and phillips #00 if you don't have insurance.
xboxfanj said:
Pull battery using a torx t5 screwdriver and phillips #00 if you don't have insurance.
Click to expand...
Click to collapse
What's the purpose of pulling battery out? Just a try? I'm gonna have to get it from Fry's tomorrow and try that first.
phatjulie said:
What's the purpose of pulling battery out? Just a try? I'm gonna have to get it from Fry's tomorrow and try that first.
Click to expand...
Click to collapse
Because your phone doesn't know if it needs to be in charging mode or booting. Pulling battery will fix it.
Sent from my LG-LS970 using xda app-developers app
I had a similar problem as you. Upon getting the phone I rooted and used the FreeGee app from the Google Play store to unlock the bootloader. Everything seemed fine and dandy, until one day when I let my phone's battery drain completely. Pluggin it in to a wall charger resulted in the failed boot where the LG logo flashes before going to a blank, but backlit screen. Luckily, the first few times this happened, through a combination of quickly plugging and unplugging the usb cord and holding the volume up+power button, I could get it into recovery (TWRP). Then a simple cache & dalvik cache wipe, and the phone would boot up as if nothing ever happened. Very strange.
Well yesterday this happened again, however, this time there was no getting the phone into recovery. My previous methods of button mashing and plugging and unplugging weren't working. So, I decided to bite the bullet and use LGNPST to get back to ZV7. Now, like you mentioned, this failed boot would automatically happen, without pressing the power button to turn it on. So it was difficult to get the phone to stay off. I found that with the phone unplugged, if you continue to press the power button until the blank backlit screen turns off, AND continue to hold the power button for an additional five seconds, the phone would stay off and not auto power on into the failed boot.
Once I was able to get the phone to stay off, I pressed the middle of the volume key to depress both volume up and down, and then plugged a usb cord that was attached to my computer. This powered on the phone into download mode. Following the LGNPST guide I was able to get to around 67% complete before my phone turned off and an error message flashed on the computer screen telling me to power cycle the phone and reconnect. Well, the whole 67%/85% LGNPST failure is apparently common and not indicative of an actual failure; HOWEVER, my phone became completely unresponsive. It wouldn't power on at all. It didn't matter if the usb was unplugged or connected to the computer or wall charger. So, I was forced to unplug the battery. I followed this tutorial and successfully disconnected and reconnected the battery cord, and the phone shot back to life. It even booted up into the factory stock ZV7 rom. I guess that LGNPST was successful. It looked like I was on my way to returning my phone to breezy's deodexed ZV9 stock rom that I was previously running.
I went ahead and re-rooted, ran the FreeGee app again, and rebooted into recovery. Then I made a backup and attempted to flash my new rom. Now, I think this is where I royally screwed up. I was pleasantly surprised to see my screen layout and all of my settings still intact after LGNPST back to ZV7 and thought I could just wipe the caches and ignore the factory reset and system wipe before flashing. Perhaps it was this, but part of me also thinks there might be something wrong with my battery draining extremely fast in recovery.
I proceeded to flash and all seemed good, but rebooting resulted in the LG logo failed boot that we have already discussed. So, I went ahead and repeated the LGNPST-re-root process numerous times (switching to the freegee 0.5 batch file instead of the app). Everytime after the first initial restore, I could never get my phone to enter recovery. As soon as I rebooted after using freegee, the phone would be soft bricked again. Sometimes I would get the LG logo thing, other times I would get the dreaded alternating flashing red notification light and soft keys. A battery pull was usually required in these circumstances before I could get back into download mode to start all over.
I was about ready to give up when I took to the LGOG irc channel. That's when Xboxfanj stepped in and helped me out IMMENSELY. Over the course of several hours, he walked me through flashing some partitions in ADB. At times it seemed like there was no hope and that I should have just returned the phone, but he failed to acquiesce, we pushed forth trying a couple of other bootloader options. The new bootloader appeared to have fixed the phones erratic behavior with powering on and off, but I had no rom to boot into and no recovery. Xboxfanj recommended using fastboot to flash over a recovery. Once in the new bootloader screen my Windows XP machine detected new hardware and wanted some drivers. I attempted to use the [ADB/FB/APX Driver] Universal Naked Driver 0.72, but XP indicated that I was missing 'winusbcoinstaller2.dll'.
I grabbed winusbcoinstaller2.dll from here and all was good. Fastboot recognized the phone, I was able to flash recovery and subsequently boot into recovery. From there I reformatted the system, wiped data/factory restore, wiped cache, wiped dalvik cache, and flashed breezy's ZV9 deodexed rom.
Fortunately, after around 7 hours, I am happy to say my phone is back to being rooted, unlocked, and running ZV9. It powers on and off properly and can get into recovery without a hitch. I'm still curious what will happen if I let my battery drain completely. Perhaps I'll try it some time this week. I'll be sure to post back here if/when I do that. All in all, it was a harrowing, but educational experience.
Anyway, just wanted to give a big THANK YOU to Xboxfanj! You really are the man :good:. Thanks for your patience and determination.
Hi friends!!
After my S4 decided to run away without insurance I had to revert back to my s2. It still had Hellybean on it so I upgraded it to PA 4.45 just to check it out on my phone. Then I went into the instructions on how to unlock the phone. I went to revert it back to stock ICS that it came with to do so and when I rebooted it gets stuck at the samsung logo that pulses. I can't get into recovery but I still can get into download mode but nothing works when flashed. I tried using ODIN for every stock ROM available and still nothing. I never bricked a phone before and this doesn't seem like one to me since the bricks I fixed before have never been able to go into DL mode without being jigged, Can somebody help me. I need this running asap for medical reasons. I'm a sitting duck without this phone if something should happen to me. I live alone and have no land line if I need to call 911.
ScottPomroy said:
Hi friends!!
After my S4 decided to run away without insurance I had to revert back to my s2. It still had Hellybean on it so I upgraded it to PA 4.45 just to check it out on my phone. Then I went into the instructions on how to unlock the phone. I went to revert it back to stock ICS that it came with to do so and when I rebooted it gets stuck at the samsung logo that pulses. I can't get into recovery but I still can get into download mode but nothing works when flashed. I tried using ODIN for every stock ROM available and still nothing. I never bricked a phone before and this doesn't seem like one to me since the bricks I fixed before have never been able to go into DL mode without being jigged, Can somebody help me. I need this running asap for medical reasons. I'm a sitting duck without this phone if something should happen to me. I live alone and have no land line if I need to call 911.
Click to expand...
Click to collapse
Are you trying to boot into recovery while you are plugged into a computer?
Sent from my SGH-T989
jrc2 said:
Are you trying to boot into recovery while you are plugged into a computer?
Sent from my SGH-T989
Click to expand...
Click to collapse
Of course not. But I think the problem may be that I didn't know that Kies was still installed in this computer.
And removing Kies didn't work either. I was talking to a guy that does jtag repair near me he said try that first. Gave me a pit file and it didn't help.
ScottPomroy said:
Of course not. But I think the problem may be that I didn't know that Kies was still installed in this computer.
And removing Kies didn't work either. I was talking to a guy that does jtag repair near me he said try that first. Gave me a pit file and it didn't help.
Click to expand...
Click to collapse
Here is something something that has worked for me twice. Use JOdin3 ( https://builds.casual-dev.com/jodin3/) Plug your phone in before going to the websute and put the TWRP tar file in PDA. Click start. It will say it needs to obtain a pit file. Click OK. Ignore the part about using in the download mode combo. It should bootloop your phone and you then might be able to unplug your phone and boot into recovery. I use this as a last resort but it has worked twice for me.
Sent from my SGH-T989