[Q] Samsung t989 Galaxy S II - Bootloop HELP please :( - T-Mobile Samsung Galaxy S II SGH-T989

I downloaded the Jedi Mind Trick JB 2 ROM and installed it via clocwork mod recovery .. That went fine but it took me a few days to realize I didnt have a working video camera anymore on my phone.. so I thought to flash a stock ROOTed rom instead...
Then I found this threat about an updated version of Jedi Mind Trick's ROM labled JB 3.. So I wiped as much as I could in recovery and chose to format all the options it gave me in recover , Format system , data , cache , emms(or something) .. and now when I boot the phone , it shows the first flash screen , and the samsung logo starts to shimmer then it reboots back to the splash screen and repeats this process everal times before just going black and sitting there..
So I've successfully bootlooped my phone doing this..
MY PROBLEM -- I don't know how to charge my phone or connect to it to install anything else..
Is this a serious problem? How can I charge my phone to continue troubleshooting it? It still has some battery to try some things but I don't know how to hook it up to transfer any other roms to it via USB cable and PC in it's current state..
I'm very computer savvy but I'm trying to learn this phone modding stuff and I realy hope I didn't brick my phone in this process.
Can someone please help me out here? I'll be on the forums religiously until I figure this out.
What should I start doing first??
Any help would be greatly appreciated!! Thanks!

still working at it
I think I'm at the point of having to use ODIN to flash a new rom since i cannot simply copy this rom to the sdcard to use clockwork to flash it .. Am I correct on this ?
For some reason this rom I found (should be stock rooted tmobile gSII rom) does not want to open from ODIN's PDA button cause its in .zip and not .tar or anything... I'm not sure how to flash this rom with ODIN ( I'm not even 100% sure this is how its supposed to go) Any suggestions ?

phew
UPDATE - So I managed to research enough to find out that there is no way to flash a CUSTOM rom with ODIN.. SO I had to download a stock (presumably rooted) t-mobile rom and flash THAT ...
Now I'm back up with a rooted rom and will begin re-installing clockwork and then my custom deodexed rooted rom afterward.
Thanks for all who almost kinda tried to care to reply in this past 2 hours =) -- As previously mentioned.. I am a nerd.. I just suck at phone modding. Haha
So , looks like I'm in the clear now and don't need any more support on this particular topic yet.

zarklon said:
UPDATE - So I managed to research enough to find out that there is no way to flash a CUSTOM rom with ODIN.. SO I had to download a stock (presumably rooted) t-mobile rom and flash THAT ...
Now I'm back up with a rooted rom and will begin re-installing clockwork and then my custom deodexed rooted rom afterward.
Thanks for all who almost kinda tried to care to reply in this past 2 hours =) -- As previously mentioned.. I am a nerd.. I just suck at phone modding. Haha
So , looks like I'm in the clear now and don't need any more support on this particular topic yet.
Click to expand...
Click to collapse
Is this true? Through a recommendation (haven't done anything to my phone from rooting/flashing KANGSJUGGERNAUT2 years ago), I tried to flash CM10 and ended up with a bootloop myself. Tried flashing through ODIN but it kept crashing; does anyone know why?
Afterward, I tried to reflash it through CWM and from then on bootloops into a installation process that never completes.
For some reason my CWM turned super slow, freezes/hangs and reboots after a few minutes.
I gave the phone to a friend who does this stuff on the regular but he said my initial flash wasn't complete cause in download mode says I'm still running official? No clue.
I was told this via email/chat: "No luck, it won't even boot anymore, I think I'll just bring it back tmrw morn
10:43 PM
Sorry I'm at a wedding (yea I know random) I left my phone with coat check
OK I've narrowed down the reason but not the solution, you had an AOKP based ROM which fundamentally is based on CyanogenMod, but it wasn't correctly flashed as the phone still thought it has factory ROMs still running
11:10 PM
Clockworkmod(even though it was working before) wasn't accessing the partitions of the phone correctly so it wasn't properly wiping or flashing properly.
11:12 PM
So basically from the first time you flashed cwm it didn't flash properly then the next time you flashed using the new recovery it didn't flash anything it was supposed to do itself properly , so basically it was a chain of events in addition to a bad boot loader, that's why it never went to recovery or download mode correctly
11:13 PM
That's something that had to do with the way the phone was built meaning you may of had a bad bootloader from the very begin and are now feeling the synptoms
Basically, and I would hate to be the reason or partially the reason you have a dead phone, basically it was a matter of coincedencr that it happened as this could of happened at anytime, once you have a bad boot loader its pretty much down hill from there"
Any helpful insight as how I can rectify this? is my phone truly dead? Sorry about the quoted format, it was copied and pasted.

If I were in your boat, I'd use Odin and flash the stock 4.1.2 ROM.
Sent from my Nexus 7 using Tapatalk 4 Beta

tronmech said:
If I were in your boat, I'd use Odin and flash the stock 4.1.2 ROM.
Sent from my Nexus 7 using Tapatalk 4 Beta
Click to expand...
Click to collapse
The phone won't turn on, unable to go into recovery and download mode; plugged in usb (hear connection beep but pressing power button plays disconnect button) to no avail. What can I do to unbrick?
Stock 4.1.2? Possible over a hardbricked T989 with old 2.3.6?

JahJahLoO said:
The phone won't turn on, unable to go into recovery and download mode; plugged in usb (hear connection beep but pressing power button plays disconnect button) to no avail. What can I do to unbrick?
Stock 4.1.2? Possible over a hardbricked T989 with old 2.3.6?
Click to expand...
Click to collapse
sorry but i have to assume that you are not doing the 3 button recovery or download mode right.
Pull battery, put battery back in, hold power button & Vol +/- untill you see SAMSUNG on the screen ---> let go off power button(keep holding
Vol +/- button) .....u will see recovery. (assuming you did flash cwm before).
Let me know.
hit thanks.

sam.balia1012 said:
sorry but i have to assume that you are not doing the 3 button recovery or download mode right.
Pull battery, put battery back in, hold power button & Vol +/- untill you see SAMSUNG on the screen ---> let go off power button(keep holding
Vol +/- button) .....u will see recovery. (assuming you did flash cwm before).
Let me know.
hit thanks.
Click to expand...
Click to collapse
I believe I am doing it correct, I have been entering recovery and download mode many times, right before I soft bricked it.
And sorry, no, I've tried many times, many methods and my phone is confirmed as entirely hard bricked.
SUPAR SAD, but thank you!

dont give up
JahJahLoO said:
I believe I am doing it correct, I have been entering recovery and download mode many times, right before I soft bricked it.
And sorry, no, I've tried many times, many methods and my phone is confirmed as entirely hard bricked.
SUPAR SAD, but thank you!
Click to expand...
Click to collapse
you can try using adb and put the phone in dl mode.
sometimes its as easy as pull battery and wait awhile (20 min or more) and try again.
if you've exhausted all possibilities, you can use a jig to force a dl mode.
let me know

sam.balia1012 said:
you can try using adb and put the phone in dl mode.
sometimes its as easy as pull battery and wait awhile (20 min or more) and try again.
if you've exhausted all possibilities, you can use a jig to force a dl mode.
let me know
Click to expand...
Click to collapse
I don't know what adb is, or how to use it; I have, however seen my friend RDP to my desktop and do something and used the term 'adb' in his attempt to code through the phone.
I've done that battery waiting period, for nearly an hour and still no result.
After doing some researching, I have found that many people have stated a USB JIG would not be applicable to a 'hard bricked' phone. I really wanted to try as it looked like the most, simple and inexpensive solution.

JahJahLoO said:
I don't know what adb is, or how to use it; I have, however seen my friend RDP to my desktop and do something and used the term 'adb' in his attempt to code through the phone.
I've done that battery waiting period, for nearly an hour and still no result.
After doing some researching, I have found that many people have stated a USB JIG would not be applicable to a 'hard bricked' phone. I really wanted to try as it looked like the most, simple and inexpensive solution.
Click to expand...
Click to collapse
If you know for a fact that you bricked your s2, maybe wrong rom or kernel that u flashed by accident then.....
contact these guys.... http://brickedmyphone.com/contact-me/
good like and click thanks if you agree.

sam.balia1012 said:
If you know for a fact that you bricked your s2, maybe wrong rom or kernel that u flashed by accident then.....
contact these guys.... http://brickedmyphone.com/contact-me/
good like and click thanks if you agree.
Click to expand...
Click to collapse
Lols, you're really fishing for them "Thanks"; you got it buddy. Very swift responses. :cyclops:
Anyway, I'm still searching the net for anymore possible solutions.
Thanks.

JahJahLoO said:
Lols, you're really fishing for them "Thanks"; you got it buddy. Very swift responses. :cyclops:
Anyway, I'm still searching the net for anymore possible solutions.
Thanks.
Click to expand...
Click to collapse
fishing for them ???????
what the hell does that even mean? it seems that brick did hit u in the head!!!

sam.balia1012 said:
fishing for them ???????
what the hell does that even mean? it seems that brick did hit u in the head!!!
Click to expand...
Click to collapse
It might as well have... :crying:

Related

GN not starting

hi,
i need help my GN is not starting after I flashed a theme all i can just get into clock mode recovery even i didn't have any back up or any restore point it just shows google logo when i start. Please helppppppppppppppppppp pleaseeeeeee
thankzzz
now i am stuck on below attachment please help thnkzz so much for all reply till now
since you didn't do a Android your basically screwed so all you data is gone you only hope is to transfer a file through fastboot(can you even do that?) Or boot to Odin mode and flash a stock image
Sent from my Galaxy Nexus using XDA App
GSM or LTE Gnex? What ROM were you running?
Golden rule: Do a backup before doing anything to your phone!
Now all you can do is to download EXACTLY same ROM as you were using by now, wipe cache/dalvik-cache, flash this ROM once again and hope that i'll boot. If it won't you'll have to wipe /data is well.
Sleuth255 said:
GSM or LTE Gnex? What ROM were you running?
Click to expand...
Click to collapse
HI
its gsm i tried to flashed the same rom but still the same only i can access is to recovery
cordell507 said:
since you didn't do a Android your basically screwed so all you data is gone you only hope is to transfer a file through fastboot(can you even do that?) Or boot to Odin mode and flash a stock image
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
tnkz bro but i am new to android please help how to do it with Odin
well since you can boot into recovery try searching in your sdcard folders if youve left a ROM .zip there laying around and if this is the case just flash it and youre back on track
nonione said:
well since you can boot into recovery try searching in your sdcard folders if youve left a ROM .zip there laying around and if this is the case just flash it and youre back on track
Click to expand...
Click to collapse
unfortunatly i delete system file and data file also in recovery i tried to flash the zip update but no result helpppppppppppppppp
salym said:
unfortunatly i delete system file and data file also in recovery i tried to flash the zip update but no result helpppppppppppppppp
Click to expand...
Click to collapse
This will help you get back to stock
http://forum.xda-developers.com/showthread.php?t=1392310
Sent from my GNex {GSM} T-Mobile
Change your spark plugs.
Sent from my Nexus in Texas.
spaceman860 said:
This will help you get back to stock
http://forum.xda-developers.com/showthread.php?t=1392310
Sent from my GNex {GSM} T-Mobile
Click to expand...
Click to collapse
Hi bro i tired with Odin but stops on userdata any help thnkzzzz
salym said:
hi,
i need help my GN is not starting after I flashed a theme all i can just get into clock mode recovery even i didn't have any back up or any restore point it just shows google logo when i start. Please helppppppppppppppppppp pleaseeeeeee
thankzzz
Click to expand...
Click to collapse
i am stuck on this now please help
ouch... softbrick.
put your phone down.
take a deep breath or two.
If you are old enough, grab a beer and relax for a bit. Think calming thoughts.
Now, start learning about how to mod your GNex. We can help.
Here's your First assignment:
find out if you still have a bootloader by booting into fastboot mode. Report back with your findings and a screenshot!
Sleuth255 said:
ouch... softbrick.
put your phone down.
take a deep breath or two.
If you are old enough, grab a beer and relax for a bit. Think calming thoughts.
Now, start learning about how to mod your GNex. We can help.
Here's your First assignment:
find out if you still have a bootloader by booting into fastboot mode. Report back with your findings and a screenshot!
Click to expand...
Click to collapse
Still have a bootloader? Are you serious? You need to learn how to use an android device as well.
To the OP: Do a factory reset in Clockwork and go to mounts
and format /system. Flash the ROM zip. Profit.
Absolutely serious. Have you been reading this thread? The OP needs to start at ground zero and stop just trying every tool he/she sees. My purpose was to get this person to do some research and I was establishing a knowledge baseline. One plan I was considering was to help the OP install the GNex toolkit then locate stock images and obtain a working build. Your cryptic one liner bit should prove vastly more useful to this guy though. I'll let you have at it and go back to my dev work. lol at least this post was a good way to make sure gapps/root capabilities are properly cooked into my latest test build ....
Sent from my Full AOSP on Toro using xda premium
Sleuth255 said:
ouch... softbrick.
put your phone down.
take a deep breath or two.
If you are old enough, grab a beer and relax for a bit. Think calming thoughts.
Now, start learning about how to mod your GNex. We can help.
Here's your First assignment:
find out if you still have a bootloader by booting into fastboot mode. Report back with your findings and a screenshot!
Click to expand...
Click to collapse
U r right i am not good in android but i tried to be and this happens, meanwhile nothing shows after i start the device it shows the !!!! mark with device the PC logo,this happens due to ODin actually the SUMSUNG ADB interface shows ! mark because i cant debug from device even no bootloader works any more thnkz for replying
*facepalm*
OP, you are holding it wrong.
I can think of at least 2 ways to recover from a situation like this. Both are well described in these forums (search works 99% of the time).
....
Oh come on, you don't have the zip of the last rom you flashed, get another one, hey, its free right? **** we dont know nothing about but we'll flash it anyways!
Man...If you have cwm recovery, you're safe. No need to go messing with fastboot (forget odin) just yet. Now stop wasting everybody's time and learn to help yourself.
Here's a few tags to get you started:
cwm, recovery, adb, bootloader, fastboot
bk201doesntexist said:
*facepalm*
OP, you are holding it wrong.
I can think of at least 2 ways to recover from a situation like this. Both are well described in these forums (search works 99% of the time).
....
Oh come on, you don't have the zip of the last rom you flashed, get another one, hey, its free right? **** we dont know nothing about but we'll flash it anyways!
Man...If you have cwm recovery, you're safe. No need to go messing with fastboot (forget odin) just yet. Now stop wasting everybody's time and learn to help yourself.
Here's a few tags to get you started:
cwm, recovery, adb, bootloader, fastboot
Click to expand...
Click to collapse
i tried more than one day on this issue its only starts with !!! mark on it nothing else, i have attached the pic i cant access any bootloader or any cwm or any thing all i did with Odin and stuck to attached pic even i start the device its shows the same pic.
http://www.youtube.com/watch?v=WdM2M8Nz6QQ this I used on Odin
thnkzz
As I suspected earlier, it appears that the OP may have trashed his bootloader partition when he tried using Odin to flash the 4.0.2 factory image (which includes a bootloader). At one point he had CWM but not any more since he can't boot to the recovery partition.
Another possibility is that the Odin tool itself places the device in this mode and it can't be manually reverted by starting up in fastboot mode. Looking at the picture, it literally appears that the phone is saying that a flashing operation is half finished but the phone has lost the PC connection... This would be a lot like what I've experienced with iPhones.
In either case, I can deduce that Odin is the tool to use to clear this softbrick.
Hopefully, it'll be flame-off now Sdobron. Perhaps you might want to help out here since I'm not up to speed on the Odin tool myself and would like to learn more about it.
@salym: I know this may be redundant but I need to establish your problem baseline empirically. Once again, can you verify that when you hold vol down/vol up then press power that you get the image you posted?
Use Fastboot!
Dude, it looks like your problem is with crappy boot sector.
While turning on your phone, hold both volume up and volume down buttons, and long press power button untill you feel single vibrate feedback.
Then connect your phone to the computer via USB, and if it doesn't detect drivers, google "samsung android usb driver". Additionally you can install PDANet application (X64 or x86 depending on you system).
THen download Fastboot - there are plenty of instructions how to flash it, and flash stock images (that come with radio, boot sector, rom itself, etc) - there are also plenty of discussions about how to do it. PM if you have any other questions!

[Q] Gnex wont boot. Cant flash from fastboot (too many links error)

CDMA GALAXY NEXUS> Hey guys, I was running Romanbb's 4.0.4 build earlier today. I clicked on a video (which may or may not have been on a porn site) all of a sudden my screen went all wacky. Where it was kind of fuzzy and running diagnal across the screen. I could only see part of it. I thought I might have gotten a virus or something because i have never had one of my devices do this before. So I immideatly rebooted the phone into recovery and wiped eveything including formatting system. I went to flash a nandroid I had of black ice and in the middle of flashing that my phone rebooted itself and stayed there (bootlooping at the google logo) I can get into fastboot and I can get into recovery about one out of every ten times but I cant do anything in recovery because the phone turns itself off insted of booting recovery most of the time (I have clockwork touch) When I do get into recovery without it turning off it reboots if I try to flash anything. It seems to be stable in fastboot (thank god!) but When I get it connected in Wugs Root tool kit and try to flash the stock image it goes through the motions and says FAILED on every step exept the first (which I believe is checking radio). It says ( error too many links) on the first two) and I cant remember the error on the last four but I have tried it a couple times so I can replicate it if needed. Can anyone tell me what to do from here? I really appreciate in advance!!! If this is a hardware error then I would like to get it back to stock to get it replaced. It is weird that it happened while running a rom. Its not like I messed up while flashing or anything.
ADB will recognize it in Fastboot. I already set all of that up when I rooted. when I try to flash the stock+unroot option on wugfresh's toolbox it errors out on every step like there is something wrong with my internal sd on my phone? Im wondering if I should try odin. IDK? Im hoping somebody who has seen this or had this happen before will save the day and tell me what to do.
lol why did you rush into CWM and start wiping things? you should have let it reboot and it probably could have been a one off..
you can try this http://rootzwiki.com/topic/14145-od...actory-odin-restore-402-with-radios-unrooted/
It is stable in fastboot but in cwr it is still geeking out
It still is glitching in cwr. most of the time it either turns off or reboots when I try to go into cwr. i can wipe but if I flash anything it freezes at the point where it starts writing to storage. I have never seen anything like this before.
I have now tried oden as well
It looks like it is a problem with the hardware. The phone is only a couple months old if that. So I really wish I could flash the stock image or at least get rid of cwm. but that is not looking likely. Here are a couple pics of odin showing the problem. Any guidace would be much appreciated. This SUCKS
Why in the heck are you trying to use Odin?
I can only get into fastboot and odin.
CWM wont let me do anything. it crashes and reboots into a bootloop if I try to flash anything. The poster above suggested odin. I dont know what else to do. Please help if you can!
Can you get a screencap of when it fails fastbooting the stock images?
yes
yes, give me couple min and I will post it. Thank you!
I guess I cant. This is all I get now
drumdestroyer said:
yes, give me couple min and I will post it. Thank you!
I guess I cant. This is all I get now
Click to expand...
Click to collapse
How are you attempting to access fastboot?
Vol + and Vol - and power all at the same time
Vol + and Vol - and power all at the same time from powered off
And oden was Vol - and power at the same time from powered off
Now no matter what I push it goes to the screen with the yellow triangle.
That screen says you (now) have a corrupt partition.
At this point, you must use Odin, which is unfortunate. What URL did you use to download the image? The current image in that thread was on multiupload.
drumdestroyer said:
Vol + and Vol - and power all at the same time from powered off
And oden was Vol - and power at the same time from powered off
Now no matter what I push it goes to the screen with the yellow triangle.
Click to expand...
Click to collapse
during my rooting attempt I had a problem with the two vol buttons. It was quite frustrating. Keep trying them and try pressing the power button a fraction of a second sooner.
I downloaded the one later in the thread
Here's the Modem: http://dl.dropbox.co...15.EK02_LTE.tar
Here's the System: http://dl.dropbox.co...L53F_signed.tar
from this thread on page 3 housry23 posted them from his dropbox:
http://rootzwiki.com/topic/14145-od...restore-402-with-radios-unrooted/page__st__30
there were a couple other posts right around the same time with it but they all were the same file name
I thought I saw the same files in the xda thread i found also
I used that thread because it is the one that the second post linked for me.
drumdestroyer said:
Vol + and Vol - and power all at the same time from powered off
And oden was Vol - and power at the same time from powered off
Now no matter what I push it goes to the screen with the yellow triangle.
Click to expand...
Click to collapse
Send it to me. I might be able to fix it. PM me.
Sent from my Galaxy Nexus using xda premium
loveubuntu said:
during my rooting attempt I had a problem with the two vol buttons. It was quite frustrating. Keep trying them and try pressing the power button a fraction of a second sooner.
Click to expand...
Click to collapse
no luck with that. it seems to only open to the "corupted partision" screen. Thanks for the suggestion.
ljwnow said:
Send it to me. I might be able to fix it. PM me.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I pm'd you to ask how you could fix it. Just wondering if I could do it. I can follow instructions well. I have never had a problem and have been flashing stuff for a year or so. IDK what happened here.
I can't help but I wanted to share that I had a similar experience. I was bonne stock and clicked on a you tube video and my phone immediately shut down and tried to reboot itself, but only would boot loop. I had to manually reformat my partitions to recover. Sounds like your case might be even worse. Still don't know what my problem was.
Sent from my Galaxy Nexus using XDA
Thanks. Any feedback is appreciated.
so you can't get into bootloader or odin screen any more? if so try using a Jig it works to get the phone into odin mode for me. i used the same usb jig i made for the captivate.
I got the same suggestion from someone else. I have to wait until radio shack opens in the morning and I will give it a shot. Otherwise, I went by verizon and they are having samsung send me a replacment. I would much rather keep this one if I can though
I tried flashing the stock image from fastboot and it failed though when I could get there, and I also tried flashing the stock image through oden when I could get there and both failed multiple times so I don't have much hope. I think something broke.
I am headed to radio shack now. Be back soon with a answer as to wheather I can save my baby or not.

PLEASE HELP!! Did I just brick my brand new SIII

Ok I was following this root toolkit step by step..... everything seemed to be going smoothly, I was flashing Odin and when the phone powered off to reboot, nothing happened. It did not reboot and on the toolkit page it just says ``waiting for device to be detected``.... but nothing. I tried to power up the phone manually and nothing...for a split second an image of a completely drained battery with a ``loading circle`` in the center of the battery, but then it disappears and still nothing but a dead phone. I tried to boot the phone up holding the home button, volume down and power and a warning message comes up saying....
Warning: A custom OS can cause critical problems in phone and installed applications. If you want to download a custom OS, press the volume up key. Otherwise, press the volume down key to cancel and restart phone``
I tried the volume down and `` SAMSUNG`` appears for a split second then dead again.
Can somebody PLEASE help me....... Im so stupid...Ive had this brand new phone for less than 12 hours!! Thank you all in advance and I hope to hear from anyone. .
This is the toolkit I used was Samsung Galaxy Root Toolkit V3.0....SGS3 Snapdragon Toolkit V1.0
At the end of the steps it stated xda was the source so I figured it was legit.
Jeff
how long did you wait for the phone to reboot?
if you can get to the warning about the custom os again, that's a good sign. when you do that, press volume up and use odin to load a stock rooted rom and you should be fine.
sent from my I747
cehf said:
how long did you wait for the phone to reboot?
if you can get to the warning about the custom os again, that's a good sign. when you do that, press volume up and use odin to load a stock rooted rom and you should be fine.
sent from my I747
Click to expand...
Click to collapse
Thank you so much for the fast reply. Yes I pressed up and the downloading screen came up. On the top is says in red Odin Mode.... how do I go about usin Odin again... I was just following the step by step before and I dont want to screw anything else up, would you mind walking me through this.... Yes Im a super noob, Im sorry for the inconvenience.... is there still a chance of being able to root this device (sorry my exclaimation marks dont work)
This is step by step guide.. Visit it
http://reviews.cnet.co.uk/mobile-phones/how-to-recover-a-bricked-samsung-galaxy-s3-50009490/
Sent from my ST21i2 using xda premium
I want to do this but im worried that if I get off the Odin Mode screen I wont get it back again....is that possible
jscottbb6 said:
I want to do this but im worried that if I get off the Odin Mode screen I wont get it back again....is that possible
Click to expand...
Click to collapse
Don't worry you'll get the odin screen again just use odin to flash back to stock and you'll be good to go
Sent from the scary door.....
jscottbb6 said:
I want to do this but im worried that if I get off the Odin Mode screen I wont get it back again....is that possible
Click to expand...
Click to collapse
ok then, how do I get into recovery mode from the Odin Mode Downloading Do not turn off target!! screen
jscottbb6 said:
ok then, how do I get into recovery mode from the Odin Mode Downloading Do not turn off target!! screen
Click to expand...
Click to collapse
Ok, I cant get into Recovery Mode... when I press Home, Volume up and power, Samsung appears for a split second with Recovery mode in blue letters... but then disappears along with a small vibrate pulse...
jscottbb6 said:
Ok, I cant get into Recovery Mode... when I press Home, Volume up and power, Samsung appears for a split second with Recovery mode in blue letters... but then disappears along with a small vibrate pulse...
Click to expand...
Click to collapse
I just realized that wen I flashed Odin it told me to choose i9300 as my phone model and that is the European model correct...This is what most likely caused this headache isnt it.... Anyways, im still stuck on the Odin Mode screen and the volume home and power buttons do nothing.....
sorry i never replied after that haha.
try using this guide.
sent from my I747
cehf said:
sorry i never replied after that haha.
try using this guide.
sent from my I747
Click to expand...
Click to collapse
the link doesnt work my friend
jscottbb6 said:
the link doesnt work my friend
Click to expand...
Click to collapse
works for me!
maybe the second time is the trick?
sent from my I747
cehf said:
works for me!
maybe the second time is the trick?
sent from my I747
Click to expand...
Click to collapse
ok it worked that time.... thank you so much...but right now im stuck on the red odin mode screen and I dont know what do do now
jscottbb6 said:
ok it worked that time.... thank you so much...but right now im stuck on the red odin mode screen and I dont know what do do now
Click to expand...
Click to collapse
well use the odin-flashables in the thread i just linked you to. you'll want to keep it in download mode (which is what you're in)
is your battery charged? you're going to want it to be when your flash anything.
sent from my I747
cehf said:
well use the odin-flashables in the thread i just linked you to. you'll want to keep it in download mode (which is what you're in)
is your battery charged? you're going to want it to be when your flash anything.
sent from my I747
Click to expand...
Click to collapse
I dont think my battery is charged and I have no way of charging it now or knowing exactly how much juice is in it
jscottbb6 said:
I dont think my battery is charged and I have no way of charging it now or knowing exactly how much juice is in it
Click to expand...
Click to collapse
Please bare with me man... im a super noob and I really had no business trying this in the first place...all ive done in the past is some custom theming... I dont even know where you are talking about when u said go to Odin flashables.... I just got the phone and it was locked to Rogers.... I went online and found a free unlock service provider thread cuz Im with Fido and I did that, bought a micro SIM card and everything was working great... until i did this... now Ive been in front of this computer for the last 7 hours stuck on this and I just want to either fix this or have it rooted ASAP... I have a HUGE headache and I have to bring my daughter to daycare in an hour and then work 12 hourstonight so I have to get to bed soon... but I dont want to leave it like this..... im so upset with myself right now grrrr I really appreciate your help brother... sorry if im frustrating you
jscottbb6 said:
Please bare with me man... im a super noob and I really had no business trying this in the first place...all ive done in the past is some custom theming... I dont even know where you are talking about when u said go to Odin flashables.... I just got the phone and it was locked to Rogers.... I went online and found a free unlock service provider thread cuz Im with Fido and I did that, bought a micro SIM card and everything was working great... until i did this... now Ive been in front of this computer for the last 7 hours stuck on this and I just want to either fix this or have it rooted ASAP... I have a HUGE headache and I have to bring my daughter to daycare in an hour and then work 12 hourstonight so I have to get to bed soon... but I dont want to leave it like this..... im so upset with myself right now grrrr I really appreciate your help brother... sorry if im frustrating you
Click to expand...
Click to collapse
What image would I flash if the phone WAS with Rogers but I unlocked the service carrier
Can someone please just tell me what to do. This is what ive done to it:
-Factory Rogers GalaxyS3
-used free online carrier unlock so I could use my Fido SIM.. (didnt know unlock was not necessary to go from Rogers to Fido)
-Idiot me used SGS3 International Root Toolkit from here - http://androidrootaccess.blogspot.ca/2012/07/rooting-samsung-galaxy-s3.html on a canadian model
-it didnt reboot back up after flashing Odin and cant get into recovery mode....only download screen in Odin Mode
WHAT DO I DO... someone please tell me what to do to either A) return it back to STOCK or B) ROOT IT Properly. Ive never done this before so telling me to go somewhere and download this and unzip it and yada yada yada means nothing to me. Can someone just give me a link to put into Odin that will make this all better....PLEASE... I havent even had this phone for 24 hours yet and I need it for work at 7pm tonight and its 930am now. Any help will be GREATLY appreciated.... and yes I know I sound pathetic and useless lol....Thanks in advance guys!!
Jeff
PS- what if I use ODIN and flash CWM-Recovery-LTE-SGS3-v5.tar.md5 .......will that allow me to wipe and factory reset
jscottbb6 said:
Can someone please just tell me what to do. This is what ive done to it:
-Factory Rogers GalaxyS3
-used free online carrier unlock so I could use my Fido SIM.. (didnt know unlock was not necessary to go from Rogers to Fido)
-Idiot me used SGS3 International Root Toolkit from here - http://androidrootaccess.blogspot.ca/2012/07/rooting-samsung-galaxy-s3.html on a canadian model
-it didnt reboot back up after flashing Odin and cant get into recovery mode....only download screen in Odin Mode
WHAT DO I DO... someone please tell me what to do to either A) return it back to STOCK or B) ROOT IT Properly. Ive never done this before so telling me to go somewhere and download this and unzip it and yada yada yada means nothing to me. Can someone just give me a link to put into Odin that will make this all better....PLEASE... I havent even had this phone for 24 hours yet and I need it for work at 7pm tonight and its 930am now. Any help will be GREATLY appreciated.... and yes I know I sound pathetic and useless lol....Thanks in advance guys!!
Jeff
PS- what if I use ODIN and flash CWM-Recovery-LTE-SGS3-v5.tar.md5 .......will that allow me to wipe and factory reset
Click to expand...
Click to collapse
If you can still get into download mode (big yellow triangle) and ODIN will recognize you phone, you can get everything you need from this forum thread to root it and then install TWRP or CWM. http://forum.xda-developers.com/showthread.php?t=1739426
If you would prefer to just get back to stock for today, you can get what you need here. http://forum.xda-developers.com/showthread.php?t=1968625
Do not deviate from these two threads. Everything you need is contained within the first post of each of those threads.
Make sure you get the correct files for your phone (AT&T, Bell, Rogers etc.) It actually doesn't really matter as long as they are files for the AT&T Samsung Galaxy S3 or I747 model. For the sake of making it easy on you, use the Rogers files as you are in Canada on the Rogers/Fido network.
I know you are in panic mode but seriously, take your time and READ the posts about how to do it. Rushing anything in this game can easily screw your phone up for good as you have already experienced first hand.
If you cannot get your phone to go into full download mode and have ODIN on your PC connect to your phone, you have it borked it up beyond easy everyday repair.
jscottbb6 said:
Can someone please just tell me what to do. This is what ive done to it:
-Factory Rogers GalaxyS3
-used free online carrier unlock so I could use my Fido SIM.. (didnt know unlock was not necessary to go from Rogers to Fido)
-Idiot me used SGS3 International Root Toolkit from here - http://androidrootaccess.blogspot.ca/2012/07/rooting-samsung-galaxy-s3.html on a canadian model
-it didnt reboot back up after flashing Odin and cant get into recovery mode....only download screen in Odin Mode
WHAT DO I DO... someone please tell me what to do to either A) return it back to STOCK or B) ROOT IT Properly. Ive never done this before so telling me to go somewhere and download this and unzip it and yada yada yada means nothing to me. Can someone just give me a link to put into Odin that will make this all better....PLEASE... I havent even had this phone for 24 hours yet and I need it for work at 7pm tonight and its 930am now. Any help will be GREATLY appreciated.... and yes I know I sound pathetic and useless lol....Thanks in advance guys!!
Jeff
PS- what if I use ODIN and flash CWM-Recovery-LTE-SGS3-v5.tar.md5 .......will that allow me to wipe and factory reset
Click to expand...
Click to collapse
I am not in your position, so please don't blame if it gets worse, but I've done several flashes so I am going to explain what would I do.
Go into the link http://forum.xda-developers.com/showthread.php?t=1739426
and download this and follow the instructions there
Rogers Image
Current I747MVLDLK4 (JB 4.1.1)
Mirror 1: Download root66_RWC_I747MVLDLK4.7z
Second,
Extract the root66_xxx_.tar.md5 from the .7z file you downloaded.
Use Odin, put phone into download mode [with phone off, hold vol. down + home + power ], connect to computer and open Odin.
once in odin click the PDA field and select the root66_xxx_.tar.md5 you downloaded.
Leave Auto Reboot and F. Reset Time checked.
click start and
when done let phone reboot.
If you have issues flashing with Odin please ensure you are using the microusb cable that came with the phone, users have had issues using other cables.
If you just want a stock, rooted phone with no custom recovery, no plans to flash custom roms, etc. then you can stop HERE.
those instructions are very clear as to what to do, but if you don't understand one let me know and I will try to explain it
edit: this video might be easier to follow on how to get odin working http://www.xda-developers.com/android/how-to-root-the-samsung-galaxy-s-iii-xda-developer-tv/

[Q] Possible Bricked Tab 3 SMT10R

All, I did watch the guide and I did spend nigh-on 3 hours, no exaggeration, trying to find my solution.
But it looks like I've really messed up big time!!!!
Idiot that I am, I had everything running perfectly before, however I have become far to over confident and i think i have bricked my device!! I flashed this thinking it was rom that was stable (http://forum.xda-developers.com/showthread.php?t=2561064)
Unfortunately its left my device unable to turn off & will only will restart showing the Samsung logo. I installed previously a custom recovery & cannot access it. I also cannot access download mode.
When you stop laughing at me can you please advise my wisest course of action? Stupid thing is I can flash and mess around with my GNex until the cows come home, but this has me flummoxed and greatly worried.
I look forward to any reply's.
Albertna said:
All, I did watch the guide and I did spend nigh-on 3 hours, no exaggeration, trying to find my solution.
But it looks like I've really messed up big time!!!!
Idiot that I am, I had everything running perfectly before, however I have become far to over confident and i think i have bricked my device!! I flashed this thinking it was rom that was stable (http://forum.xda-developers.com/showthread.php?t=2561064)
Unfortunately its left my device unable to turn off & will only will restart showing the Samsung logo. I installed previously a custom recovery & cannot access it. I also cannot access download mode.
When you stop laughing at me can you please advise my wisest course of action? Stupid thing is I can flash and mess around with my GNex until the cows come home, but this has me flummoxed and greatly worried.
I look forward to any reply's.
Click to expand...
Click to collapse
Sorry to say this, when follow this thread then you see that is an test.build
1. Can you start your rom into recovery mode?
Is your answere yes than follow step 2.
1A. Can you start your tab into download mode, is your answere yes. Flash the stockrom by odin.
2. Download a flash able rom on your pc , copy this on your ext sdcard.
3.but the sdcard into your tab.
4.start your tab into recovery mody , do a full wipe, and than flash the rom from your ext.sdcard
cross your fingers and hope that your tab booted.
bierma32 said:
Sorry to say this, when follow this thread then you see that is an test.build
1. Can you start your rom into recovery mode?
Is your answere yes than follow step 2.
1A. Can you start your tab into download mode, is your answere yes. Flash the stockrom by odin.
2. Download a flash able rom on your pc , copy this on your ext sdcard.
3.but the sdcard into your tab.
4.start your tab into recovery mody , do a full wipe, and than flash the rom from your ext.sdcard
cross your fingers and hope that your tab booted.
Click to expand...
Click to collapse
Thank you for the reply..No i cannot start tab into recovery mode or download mod.
Albertna said:
Thank you for the reply..No i cannot start tab into recovery mode or download mod.
Click to expand...
Click to collapse
As previously said, cwm or odin are the only ways you can do to revert to stock because you flashed a test cm rom. Did you try to charge your tab maybe you have lowbattery. Or maybe one of your volume keys and home button are broken.
Sent from my SM-T210R using xda app-developers app
Try Usb jig, it may works for you.
Albertna said:
All, I did watch the guide and I did spend nigh-on 3 hours, no exaggeration, trying to find my solution.
But it looks like I've really messed up big time!!!!
Idiot that I am, I had everything running perfectly before, however I have become far to over confident and i think i have bricked my device!! I flashed this thinking it was rom that was stable (http://forum.xda-developers.com/showthread.php?t=2561064)
Unfortunately its left my device unable to turn off & will only will restart showing the Samsung logo. I installed previously a custom recovery & cannot access it. I also cannot access download mode.
When you stop laughing at me can you please advise my wisest course of action? Stupid thing is I can flash and mess around with my GNex until the cows come home, but this has me flummoxed and greatly worried.
I look forward to any reply's.
Click to expand...
Click to collapse
don't blame my rom lol. Hold volume down , home button and power at the same time for like 20 secs then it will be in download mode. I have soft bricked it over 50 times. same for recovery you have to hold , vol up , home , and power until tab reboots to tab 3 logo then keep holding it for like 3 secs then let go it will go into recovery.
Thanks for all the prompt comments, yep panic over I managed to get into download mode & re-flashed the standard rom.
Albertna said:
Thanks for all the prompt comments, yep panic over I managed to get into download mode & re-flashed the standard rom.
Click to expand...
Click to collapse
Just curious- how did you get it into Download Mode?
Sent from my SM-T310 using Tapatalk

Nasty Bootloop after Flash on Sprint G2

Last night I installed geefree on my phone from the app store and used it to install TWRP. I downloaded a nightly CM11 and an appropriate gapps. Using geefree I rebooted to recovery (never figured out the button combination to boot to recovery "naturally") and installed both of the zips. This could be where I made my mistake, I installed both at the same time.
Now my phone loops, displaying the LG logo for a few seconds, then shutting off and rebooting before repeating the process. I can't seem to get it to go into download mode or the recovery menu. I've tried power+up, power+down, down+up and each of those while plugging the device in, etc. I can get the device to a hardware key control mode, though it doesn't seem too useful.
How can I save my phone? This forum has been a great resource in the past and I'm very grateful for the many tutorials I've followed rooting other devices. Hopefully you guys can save the day once again!
Volume up plus power is how to access recovery on sprint.
What stock sw version were you on before you flashed cm?
Did you wipe data before flashing?
Sent from my LG-LS970 using xda app-developers app
I was using stock 4.2.2, I believe. I didn't wipe the data (shame on me), a bad habit that I picked up from my first rooted device, the Samsung Moment. It didn't ever matter on that one, afaik. Thanks for the reply!
Edit: Volume up and power whether plugged in or not takes me to the hardware key control mode screen.
Second Edit: http://forum.xda-developers.com/showthread.php?t=2432476&page=35 I also found this thread where someone seems to be experiencing similar issues and they fix it with "LG Utility." Is that a PC application? It's a little vague to google, but I've been trying!
I have a bootloop issue every time i flash a rom i have to wipe all but sd flash roms and gapps the i do a restore from twrp and oly restore my boot image only and they boot no prob
I'm kind of starting to suspect my power button doesn't work at all for whatever reason. I have a lot of difficulty getting the phone to shut down, then it doesn't seem to easily power up. It's a strange collection of problems. Would a Sprint repair place be able to fix this?
If they have parts on hand if not either a swap out or a sendoff
Same problem here - bootloop and no download mode - CWM works! - urgently need help
I guess I have the same problem as InlineFourPower (apart from that my power-button has no problem).
I am stuck in bootloop since I tried to upgrade to Kitkat a few days ago. Now I can´t get into download mode any more, nor into fastboot or anything else. Only CWM works.
From within CWM I can successfully flash ROMs but that doesn´t help, since afterwards I am still stuck in bootloop. It is possible, however, to push files via adb-commands while I am in CWM.
Does anybody have an idea how to go from here or how to get download-mode back?
Device is recognized but can´t be mounted - bricked forever?
Parinibbana said:
I guess I have the same problem as InlineFourPower (apart from that my power-button has no problem).
I am stuck in bootloop since I tried to upgrade to Kitkat a few days ago. Now I can´t get into download mode any more, nor into fastboot or anything else. Only CWM works.
From within CWM I can successfully flash ROMs but that doesn´t help, since afterwards I am still stuck in bootloop. It is possible, however, to push files via adb-commands while I am in CWM.
Does anybody have an idea how to go from here or how to get download-mode back?
Click to expand...
Click to collapse
I tried a few things on Linux.
After terminal-command "ls /dev/sd*" when the device is unplugged from the computer I get "/dev/sda".
When the device is connected via USB, I get: "/dev/sda /dev/sdb"
So sdb is my LG G2.
So I went on to the next command: "gdisk -l /dev/sdb"
As a result I get: "Problem opening /dev/sdb for reading! Error is 123."
Does it mean that the phone isn´t mounted or what? Now I´ve connected my phone to another Linux machine with the same result. It is recognised (p.e. as sdd), but there is no sdd1. Seems as if it is recognized, but can´t be mounted. Does that mean my device is bricked for good? That´s it?
to get the phone into download mode you have to plug the usb cord in and hold VOL+, so to get this right as I have a case on mine, plug the usb into the phone first then hold VOL+ and plug into usb port on the computer.
it does take a loooong time to power down the phone with the button when stuck in a boot loop, just keep holding it until it shuts off, it will shut off eventually!!
plug the phone in while in download mode to install drivers and set com ports, then unplug before you begin your flash with LGFlashTool, hope this helps you out.
Cronic2009 said:
to get the phone into download mode you have to plug the usb cord in and hold VOL+, so to get this right as I have a case on mine, plug the usb in first then hold VOL+ and plug into usb port.
it does take a loooong time to power down the phone with the button when stuck in a boot loop, just keep holding it until it shuts off, hope this helps
Click to expand...
Click to collapse
Thanks Cronic2009 for your advice.
There are, however, szenarios where download-mode is not accessible any more. Neither by using the hardware-keys, nor by using the adb-command.
After four days of resarch and a lot of trial and error, I finally unbricked my F320L using the two adb-commands outlined at the beginning of that thread: http://forum.xda-developers.com/showthread.php?t=2451696
Worked like a charm.
Thanks everyone for your advice.
no problem buddy, glad you got it figured out, good luck to you from here on out!
FYI, that link doesn't work
I just wanted to ask anyone who might know, since the bootloader of the LS980 is locked, we cannot "break" this correct, so no matter what commands we decide to run through root, we cant touch the true bootloader there for LS980 fail safe? (Besides Acts of God, EMP, ect)
Cronic2009 said:
no problem buddy, glad you got it figured out, good luck to you from here on out!
Click to expand...
Click to collapse
Thanks for letting me know. I corrected the link in my previous post.
Be sure if you use a aosp based rom to flash the ZV8 modem. Your can use dr87 or furnance kernals after you flash the zva modem althought i have encountered soft brick due to this.
so i'm having this exact issue and i don't know how to get out of it. i just need to transfer the radio to my phone somehow but nothing shows up under adb devices. i'm trying to the lg mobile support tool now. its downloading the software. but if it doesn't work does any one have any fixes?
edit: i fixed it by following this http://forum.xda-developers.com/showthread.php?p=51637410&highlight=download+fail#post51637410
pitbullmommy45245 said:
so i'm having this exact issue and i don't know how to get out of it. i just need to transfer the radio to my phone somehow but nothing shows up under adb devices. i'm trying to the lg mobile support tool now. its downloading the software. but if it doesn't work does any one have any fixes?
edit: i fixed it by following this http://forum.xda-developers.com/showthread.php?p=51637410&highlight=download+fail#post51637410
Click to expand...
Click to collapse
Thank You for sharing you fixed your issue pittbullmommy but the link you posted points back to a post about a failed run on LGFlashTool, will you please fix the link and point it to the post/guide you used to fix your phone, it may help others stuck in a similar situation, glad to hear you got it fixed and working, best of luck with it from here on out!
Hi all
was just about to start a new thread but didn't want to get into trouble..anyway I am in need of some assistance please.my ls980 has been bricked for some time now been searching all over the internet for a solution to be stuck back at square one.found this video on youtube which is pretty much exactly what my phone is doing.I have used lg flash tool to revert to stock and still nothing I lost root doing that but last night,I managed to regain root access I have no idea how but it happened when i clicked ioroot batch file i went into download mode and it stated bottom left ROOTED in red so i managed that but that is it still doing what is being shown in the video its on youtube
watch?v=PjLF-pBhZSY
please if anyone has the know how I would like to fix this phone rather then bin it thank you all happy 4th everyone
After using tot and flash tool to get back to stock, did you try going into stock recovery and do a factory data reset? I know it sounds stupid especially after a tot but try it. Couldn't hurt
Sent from my LG-LS980 using Tapatalk
Borderline noob here, so please bear with me...
I have been using TWRP 2.7.0.0 to do all my work, and I was able to get the Lego ROM installed with ZVA. I got into too big of a hurry and forgot to make a backup of stock. I've also been unsuccessful in trying to install ZVC modem and firmware. Thankfully ZVA works as does the LEGO ROM, but I'd like to have stock there to access as well. The stockZVC that's on the Android Development page has been getting stuck (bootloop?) on the Sprint Spark logo. I've done TWRP's factory reset with no success. Any help would be great.
Thanks in advance!
Yes sir I've tried that and more to no avail is there anything I can do through adb I'm on stock recovery phone doesn't stay on long enough to install anything
sarfdawg said:
Borderline noob here, so please bear with me...
I have been using TWRP 2.7.0.0 to do all my work, and I was able to get the Lego ROM installed with ZVA. I got into too big of a hurry and forgot to make a backup of stock. I've also been unsuccessful in trying to install ZVC modem and firmware. Thankfully ZVA works as does the LEGO ROM, but I'd like to have stock there to access as well. The stockZVC that's on the Android Development page has been getting stuck (bootloop?) on the Sprint Spark logo. I've done TWRP's factory reset with no success. Any help would be great.
Thanks in advance!
Click to expand...
Click to collapse
You ever get her fixed?

Categories

Resources