Develop Bugs

[Q] HOX stuck on slash screen

Hi,
It goes to show that a little knowledge is a dangerous thing!!!
I flashed my phone with Team Viper 2.6 (I think) and all was working fine ubtil I tried another Rom, can't remember which one and the phone will not boot past the HTC white screen.
After many hours of being unsuccessful, I sent the phone back to HTC for repair and after a few days they said that the mainboard needed replacing for almost £200 !!! So i decided against that and got the phone back.
I can get into HBoot and Fasboot USB, also can get into TWRP, so tried to reload Team Viper, as that is the only backup I had. It went through the installation process OK, but still won't get past the flash screen.
Here are some details of the phone:
*****UNLOCKED*****
Endeavoru PUT SHIP S-ON RL
HBOOT-1.39.0000
CPLD-None
MICROP-None
Radio-5.1204.162.29
eMMC-bootable: disabled
CPU-bootable: disabled
HW Secure boot: enabled
MODEM PATH: OFF
Dec 17 2012, 13:59:37
Using Hassoons Tool I got the following:-
bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.162.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.401.31
(bootloader) serialno: Removed for security
(bootloader) imei: 353043057835673
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3758mV
(bootloader) devpower: 37
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.876s
Sorry for the detailed post, but I wanted provide as much info as possible.
Now my question is: CAN SOMEONE PROVIDE A VERY SIMPLISTIC PROCEDURE TO RESTORE TO STOCK?
I feel the that phone is not "bricked" but maybe I'm wrong.
Your help and expertise would be so much appreciated for this noobie!!:fingers-crossed:

ovation99 said:
Hi,
It goes to show that a little knowledge is a dangerous thing!!!
I flashed my phone with Team Viper 2.6 (I think) and all was working fine ubtil I tried another Rom, can't remember which one and the phone will not boot past the HTC white screen.
After many hours of being unsuccessful, I sent the phone back to HTC for repair and after a few days they said that the mainboard needed replacing for almost £200 !!! So i decided against that and got the phone back.
I can get into HBoot and Fasboot USB, also can get into TWRP, so tried to reload Team Viper, as that is the only backup I had. It went through the installation process OK, but still won't get past the flash screen.
Here are some details of the phone:
*****UNLOCKED*****
Endeavoru PUT SHIP S-ON RL
HBOOT-1.39.0000
CPLD-None
MICROP-None
Radio-5.1204.162.29
eMMC-bootable: disabled
CPU-bootable: disabled
HW Secure boot: enabled
MODEM PATH: OFF
Dec 17 2012, 13:59:37
Using Hassoons Tool I got the following:-
bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.162.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.401.31
(bootloader) serialno: Removed for security
(bootloader) imei: 353043057835673
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3758mV
(bootloader) devpower: 37
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.876s
Sorry for the detailed post, but I wanted provide as much info as possible.
Now my question is: CAN SOMEONE PROVIDE A VERY SIMPLISTIC PROCEDURE TO RESTORE TO STOCK?
I feel the that phone is not "bricked" but maybe I'm wrong.
Your help and expertise would be so much appreciated for this noobie!!:fingers-crossed:
Click to expand...
Click to collapse
You probably just need to flash the boot.img from the rom zip...extract it to your fastboot folder and then execute " fastboot flash boot boot.img" and then "fastboot erase cache" using cmd (command prompt) and then reboot
Sent from my HTC One X using xda app-developers app

Sadman Khan said:
You probably just need to flash the boot.img from the rom zip...extract it to your fastboot folder and then execute " fastboot flash boot boot.img" and then "fastboot erase cache" using cmd (command prompt) and then reboot
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Thanks for the reply, but where would I get the boot.img from?
Would that be from the Team Viper ROM, or do I download from elsewhere?

Look in the flashable zip. Simply extract the boot.img from the zip:thumbup:
Sent from my HTC One X using xda app-developers app

ovation99 said:
Thanks for the reply, but where would I get the boot.img from?
Would that be from the Team Viper ROM, or do I download from elsewhere?
Click to expand...
Click to collapse
U have a backup of viper rom right? And twrp recovery? So there is a boot.emmc.win file in twrp folder on your sd card.. Flash this boot file from fastboot( b4 or after restoring the backup)

ovation99 said:
Thanks for the reply, but where would I get the boot.img from?
Would that be from the Team Viper ROM, or do I download from elsewhere?
Click to expand...
Click to collapse
You will find it in the rom zip file or you can download the viper kernel from the rom's thread..either of them will work for you.. good luck mate
Sent from my HTC One X using xda app-developers app

Sadman Khan said:
You will find it in the rom zip file or you can download the viper kernel from the rom's thread..either of them will work for you.. good luck mate
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Thanks to all you guys for your help, but did as you suggested and still no further forward.
Is there a ROM that will return my phone to stock complete with kernel, boot.img etc, that will re-install everything, wike a Windows re-installation. Or am I asking too much here?
I am losing faith in this and I can see it being dumped in the trash before long.

Flash this recovery
http://db.tt/SPXdFfPw
Rename it to recovery.img and flash it :
Fastboot flash recovery recovery.img
Fastboot erase cache
Then flash the boot.img from the viper x 3.7.5 (open the rom.zip with 7zip and copy the file)
Fastboot flash boot boot.img
Fastboot erase cache
Then go into recovery and wipe all :
Factory reset
Wipe cache partition
Mounts & storage - format cache,data,system
Advanced - wipe dalvik cache
Then install the viper x rom.zip and follow instructions.
When you get a question about a kernel....choose viper x delivered !
Done

HOX stuck on splash screen
Mr Hofs said:
Flash this recovery
Rename it to recovery.img and flash it :
Fastboot flash recovery recovery.img
Fastboot erase cache
Then flash the boot.img from the viper x 3.7.5 (open the rom.zip with 7zip and copy the file)
Fastboot flash boot boot.img
Fastboot erase cache
Then go into recovery and wipe all :
Factory reset
Wipe cache partition
Mounts & storage - format cache,data,system
Advanced - wipe dalvik cache
Then install the viper x rom.zip and follow instructions.
When you get a question about a kernel....choose viper x delivered !
Done
Click to expand...
Click to collapse
Many thanks for your detailed and simple instructions.
Howerver, I am having trouble finding the Viper X 3.7.5 ROM, could you post a link for download?
Again, many many thanks:fingers-crossed:

http://forum.xda-developers.com/showthread.php?t=2087443
Here you go

Mr Hofs said:
http://forum.xda-developers.com/showthread.php?t=2087443
Here you go
Click to expand...
Click to collapse
Mr Hofs, many thanks for the links. I downloaded 3.7.4 and the update 3.7.5.
That was the good bit......I tried to push the ROM using adb in command mode, but I couldn't get it to recognise the phone.
I thought I maybe able to drop the files onto the sd card via Windows, but althought the phone is recognised in Device Manager, it doesn't show up in Windows Explore.
I am sorry that all your help and advice has been wasted, maybe it will help others whose phone isn't as sick as mine.
I may have another go tomorrow, but it's looking like it's headed for that great waste bin in the sky.:crying:

If you want to copy the rom to the phone you go into the recovery and then to
Mounts & storage - mount as mass storage (last option in that list)
Its now a usb diskdrive and windows will recognize it (if its not, wait long enough like a minute or so. It can take a while)
Then copy the stuff you need.

Mr Hofs, Many thanks for your help.
I downloaded 3.7.4 and update 3.7.5 and tried adb push and sideload but my device wasn't recognised, although W8 could see it in Device Manager.
I will give it one more go today and if that doesn't work, it's that great trash bin in the skt.
Again many thanks for your help.:crying:

Like i said you don't need to sideload or adb anything, just do as above and you can copy it normally

Mr Hofs said:
Like i said you don't need to sideload or adb anything, just do as above and you can copy it normally
Click to expand...
Click to collapse
Mr Hofs, YOU ARE THE MAN !!!
I finally got it working and thereby saving me almost £200 for a HTC repair. Robbin' barst***s !!
I cannot thank you enough for your help and perseverence with a newbie.
I have printed your instructions for future reference. It's great to get help from someone who really knows what they're talking about.
Thank You, Thank You, Thank You. :good::good::good:

Very good !!!
CASE CLOSED !

Mr Hofs said:
Very good !!!
CASE CLOSED !
Click to expand...
Click to collapse
Mr Hofs,
Just one last question.... is there a way to get back to the Viper default settings, colours etc, without re-installing the ROM?

What do you mean exactly with colours and stuff, did you flash a theme ?

Mr Hofs said:
What do you mean exactly with colours and stuff, did you flash a theme ?
Click to expand...
Click to collapse
Yes I did ! I used your dark and yellow theme, but the trouble is now that I can't read texts and the normal (HTC) settings are all in yellow and very difficult to read.
Should I do a complete install of Viper again?

Lol did you picked the yellow theme on the skin picker ?

htc one x stuck on boot-loader CM 10.2

Hi I installed cm 10.2 correctly step by step but still stuck on bootloader. i did fastboot flash boot boot.img from fastboot and also erase cache in fastboot also did a full wipe but still nothing
my phone sid is htc_203
thanks in advance

bujarg said:
Hi I installed cm 10.2 correctly step by step but still stuck on bootloader. i did fastboot flash boot boot.img from fastboot and also erase cache in fastboot also did a full wipe but still nothing
my phone sid is htc_203
thanks in advance
Click to expand...
Click to collapse
What's your hboot version, maybe you could post the contents of the fastboot command: "fastboot getvar all" but make sure you mask your Serialnumber and IMEI.

hi
webpatrick said:
What's your hboot version, maybe you could post the contents of the fastboot command: "fastboot getvar all" but make sure you mask your Serialnumber and IMEI.
Click to expand...
Click to collapse
Here are result from command fastboot getvar all;
C:\1> fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.31.0000
(bootloader) version-baseband: 5.1204.162.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.401.600
(bootloader) serialno:
(bootloader) imei:
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__203
(bootloader) battery-status: good
(bootloader) battery-voltage: 4133mV
(bootloader) devpower: 100
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
thanks

OK, odd version-main, hboot seems fine it's 1.3+ . Maybe first try a sense ROM (ARHD or Maximus, they are close to stock)

I have had similar installs go wrong. Did you wipe dalvik as well.
Sent from my Avatar ROM that kicks buttski!!!

webpatrick said:
OK, odd version-main, hboot seems fine it's 1.3+ . Maybe first try a sense ROM (ARHD or Maximus, they are close to stock)
Click to expand...
Click to collapse
Currently I have installed HD Revolution but I like to put CM 10.2
did you mean after this trying to instal CM 10.2 or what....?
And yes i did also Dalvik wipe but still the same stuck on Bootloader

bujarg said:
Currently I have installed HD Revolution but I like to put CM 10.2
did you mean after this trying to instal CM 10.2 or what....?
And yes i did also Dalvik wipe but still the same stuck on Bootloader
Click to expand...
Click to collapse
Yes, you can try, but be aware that 10.2 hasn't have a stable release yet for our beloved hox.

Btw. just read somewhere that the .600 has to be read like:
Code:
3.14.401.600 = 3.14.401.6
3.14.401.31 = 3.14.401.31
You should be able to flash the RUU of 3.14.401.31 via executable.
But you need to flash stock recovery and re-lock.

webpatrick said:
Btw. just read somewhere that the .600 has to be read like:
Code:
3.14.401.600 = 3.14.401.6
3.14.401.31 = 3.14.401.31
You should be able to flash the RUU of 3.14.401.31 via executable.
But you need to flash stock recovery and re-lock.
Click to expand...
Click to collapse
I have tried to flash 3.14.401.31 but it says not compatible with your phone
thanks for help provided

Strange, cause HTC__203 is a (HTC-FRA) European WWE device, and your version main is also 3.14.401.*
Are you sure you have flashed the stock firmware and re-locked your device?

Remove android secure and data from your sd and reboot, I've had cm boot loop a few times because oh that even after a full wipe.
Sent from my HTC One X using xda app-developers app

webpatrick said:
Strange, cause HTC__203 is a (HTC-FRA) European WWE device, and your version main is also 3.14.401.*
Are you sure you have flashed the stock firmware and re-locked your device?
Click to expand...
Click to collapse
yes i did everything as described first flashed stock than locked bootloader than install ruu 3.14.401.31 but install will stop in the middle i get error device not compatible with this ruu

Need help urgently.... Boot loop.

Hello;
I turned my One X on after about a month of not using (got a nexus 5). I'm giving it to my dad.
It just boot loops, I have 20.6 SD rom with his stock kernal. I've wiped cache, factory reset, dalvik. Wiped via fastboot and reinstalled the kernal.
I DONT have the rom files on the SD Card any more and i get an error when I try to mount storage from CWM.
Any ideas It would be greatly appreciated as it's about time my dad got rid of his standard phone.

ben-fisher-bro said:
Hello;
I turned my One X on after about a month of not using (got a nexus 5). I'm giving it to my dad.
It just boot loops, I have 20.6 SD rom with his stock kernal. I've wiped cache, factory reset, dalvik. Wiped via fastboot and reinstalled the kernal.
I DONT have the rom files on the SD Card any more and i get an error when I try to mount storage from CWM.
Any ideas It would be greatly appreciated as it's about time my dad got rid of his standard phone.
Click to expand...
Click to collapse
post the result from command fastboot getvar all
The other thing is to instal Philz recovery and in recovery to mount the SD card. Copy your rom to SD card, flash boot.img, flash rom.

ben-fisher-bro said:
Hello;
I turned my One X on after about a month of not using (got a nexus 5). I'm giving it to my dad.
It just boot loops, I have 20.6 SD rom with his stock kernal. I've wiped cache, factory reset, dalvik. Wiped via fastboot and reinstalled the kernal.
I DONT have the rom files on the SD Card any more and i get an error when I try to mount storage from CWM.
Any ideas It would be greatly appreciated as it's about time my dad got rid of his standard phone.
Click to expand...
Click to collapse
Try to flash twrp recovery or phillz via fastboot and then the rom. And wipe fastboot cache
Sent from my EndeavorU using Tapatalk 4

and313 said:
Try to flash twrp recovery or phillz via fastboot and then the rom. And wipe fastboot cache
Sent from my EndeavorU using Tapatalk 4
Click to expand...
Click to collapse
I do9nt have access to transfer stuff to the phone. It doesn't let me!

ben-fisher-bro said:
I do9nt have access to transfer stuff to the phone. It doesn't let me!
Click to expand...
Click to collapse
Go in bootloader press volume down + power button and after this connect the phone to computer and run the command fastboot getvar all
Do you have fastboot command on your PC if no download from here

Thant said:
Go in bootloader press volume down + power button and after this connect the phone to computer and run the command fastboot getvar all
Do you have fastboot command on your PC if no download from here
Click to expand...
Click to collapse
C:\Fastboot>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.164.30H
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.28.771.9
(bootloader) serialno: HT23XW125***
(bootloader) imei: 359188043******
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: H3G__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3749mV
(bootloader) devpower: 27
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!

ben-fisher-bro said:
C:\Fastboot>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.164.30H
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.28.771.9
(bootloader) serialno: HT23XW125***
(bootloader) imei: 359188043******
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: H3G__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3749mV
(bootloader) devpower: 27
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
Click to expand...
Click to collapse
Ok Lock your bootloader if you unlocked him, in bootloader you must see LOCKED or RELOCKED this is importand.
Download this RUU_ENDEAVOR_U_ICS_40_H3G_UK_1.29.771.11 and install update to latest JB 4.2.2
or you can download Philz recovery and use the command fastboot flash recovery recovery.img
Report back
EDIT: if the first RUU not working you can try with this RUU_ENDEAVOR_U_ICS_40_S_H3G_UK_2.17.771.3
EDIT2: Strange you have too high hboot version for your main version

Thant said:
Ok Lock your bootloader if you unlocked him, in bootloader you must see LOCKED or RELOCKED this is importand.
Download this RUU_ENDEAVOR_U_ICS_40_H3G_UK_1.29.771.11 and install update to latest JB 4.2.2
or you can download Philz recovery and use the command fastboot flash recovery recovery.img
Report back
EDIT: if the first RUU not working you can try with this RUU_ENDEAVOR_U_ICS_40_S_H3G_UK_2.17.771.3
EDIT2: Strange you have too hicgh hboot version for your main version
Click to expand...
Click to collapse
I've flashed philz, but I still get a boot loop! I still cannot transfer files. AM I missing something?

ben-fisher-bro said:
I've flashed philz, but I still get a boot loop! I still cannot transfer files. AM I missing something?
Click to expand...
Click to collapse
Start the phone in bootloader and choice recovery inside you have option to mount SD car choise mount sd Card and connect the phone to computer wait 3-5 minutes and you will see the sd card ion your computer copy the rom of your choice and install the rom dont forget to flash the boot.img. I give you the RUU to go back to stock this is your other option.

Thant said:
Start the phone in bootloader and choice recovery inside you have option to mount SD car choise mount sd Card and connect the phone to computer wait 3-5 minutes and you will see the sd card ion your computer copy the rom of your choice and install the rom dont forget to flash the boot.img. I give you the RUU to go back to stock this is your other option.
Click to expand...
Click to collapse
I'm doing this but nothing is showing on my computer

ben-fisher-bro said:
I'm doing this but nothing is showing on my computer
Click to expand...
Click to collapse
Try different usb ports/cables...

ben-fisher-bro said:
I'm doing this but nothing is showing on my computer
Click to expand...
Click to collapse
try to lock the bootloader and run RUU in my links.
Update yor HTC drivers

Dont forget you have to wait a bit on phillz recovery (possibly twrp also) to mount the sd. Should take about a minute which is normal
Sent from my EndeavorU using Tapatalk 4

Send that phone to me,I will do that for you....
Gesendet von meinem HTC One X mit Tapatalk

manne48 said:
Send that phone to me,I will do that for you....
Gesendet von meinem HTC One X mit Tapatalk
Click to expand...
Click to collapse
Help him via teamviewer, easier then sending it off to somebody he doesn't know (not that you are not credible or anything) but i would not 'just' send my phone in

Yes,thats true,if he wants this he can send a mail.....
Gesendet von meinem HTC One X mit Tapatalk

Mr Hofs said:
Help him via teamviewer, easier then sending it off to somebody he doesn't know (not that you are not credible or anything) but i would not 'just' send my phone in
Click to expand...
Click to collapse
Better done this through Teamviewer.
Sent from my HTC One X using xda app-developers app

[Q] Messed up my One X

Hi XDA,
I'm stuck with my HTC One X (non-branded, probably the international version?). I have read a lot of guides, but can't seem te find the right solution for my problem. I hope you can give me some advice how to fix my One X.
First of all; I rooted my phone, put Clockworkmod Recovery on it, made a complete backup with it and installed MaximusHD on it (and probably flashed the kernel, as mentioned on the How-to).
This was in september last year. Everything worked fine.
Yesterday I wanted to install the newest Cyanogen (cm-11-20140325-NIGHTLY-endeavoru), so I did a Factory Reset and wiped cache and dalvik through recovery. When trying to install I got an error message: set_metadata_recursive: some files could not load.
After that I tried some other roms. The latest Miui and Cyanogen cm-10.1.0-RC3-endeavoru installed succesfully, but all the signals were not working (no wifi, bluetooth, data, mobile operator).
It wasn't even possible to install back the OptimusHD rom (got the set_metadata_recursive error upon instal).
After searching this error message I read about updating ClockWorkMod to the latest version. Through fastboot I could finally update CWM, but this didn't solve the error.
It was possible for me to restore my own backup through CWM, but I got the same problem with all network/signals not working.
I tried to return to stock with RUU, by following a guide. Can't find the link again, but I first needed to relock and than install the folowing exe on my pc;
RUU_Endeavor_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed
My device showed a HTC logo, but at the end of the installation the exe gave me an message that it couldn't update or something.
I also tried guide, but now my device is Relocked, so it won't work.
My device information;
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.162A.
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.20.401.1
(bootloader) serialno: SH255W100213
(bootloader) imei: 3530430xxxxxxxx
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 3634mV
(bootloader) devpower: 31
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
*** RELOCKED ***
*** Security Warning ***
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.39.0000
CPLD-None
MICROP-None
RADIO-5.1204.162A.29
eMMC-bootmode: disabled
CPU-bootmode:disabled
HW Secure boot: OFF
Can someone please help me with the next step to fix my phone? I think I need to unlock him first, but don't want to do anything untill I know if I do it right.

At first... Unlock bootloader again,....then always if you flash a Rom you have to flash the boot.img through fastboot which is inside each Rom.zip....second yea like you saw then you need a newer recovery...the best is to use this recovery http://downloads.sourceforge.net/pr...5bfb18530caaa2&ts=1395833912&use_mirror=cznic
(Sry for the long link )
There you can flash kitkat roms and sense roms so you don't have to change each time the recovery...all is working fine there...then again do the factory reset and flash the Rom you want...then boot into bootloader and flash the boot.img of the Rom you want to use...like I said the boot.img is inside the zip you flashed
Gesendet von meinem HTC One X mit Tapatalk

1. Unlock bootloader again
2. Flash latest twrp recovery
3. Wipe data, system, dalvik and cache from recovery
4. Extract boot.img from the rom zip file you want to flash on your pc
5. Flash a new ROM
6. Flash boot.img from fastboot
7. Reboot

Thanks for the quick answers!
Flashing the boot.img of the rom did the trick!:victory:

You can press thanx button too...

a.broken.star said:
You can press thanx button too...
Click to expand...
Click to collapse
Never ask for a press on the thanks button,they press it when they press it
He thanked you in person that's just as good

Mr Hofs said:
Never ask for a press on the thanks button,they press it when they press it
He thanked you in person that's just as good
Click to expand...
Click to collapse
I thought he is new here (this is the only two posts he made) thats why he didnt knew that theres a thanx button too... so i said...
anyways.. you are right..... :good:

He will learn it in the future

HTC One X Stock Firmware JB 4.2.2 S5

Hi Guys,
It's been a while since I wrote on this forum... I may be tired, but I can't work out a few things:
I have a T-Mobile UK HTC One X, due to some circumstances I needed to completely wipe...
I was already running an unbranded stock firmware on it, but after the complete wipe i wanted to install JB 4.2.2 S5 - I usually unlock the bootloader, install clockworks, copy the original unedited complete firmware zip on it and install it via the recovery, then relock the bootloader and job done, but I cannot seem to find a complete unedited rom, is either RUU.exe (which I cannot run as the PC wont see the phone due to no firmware on it, I think) or nandrom backups which I don't really want, all the OTA ones seem to just be updates and am stuck with a phone that only has clockwork recovery on it....
Where can I get an official unedited zip that I can install via clockworks?
Thanks

LondonVirus said:
Hi Guys,
It's been a while since I wrote on this forum... I may be tired, but I can't work out a few things:
I have a T-Mobile UK HTC One X, due to some circumstances I needed to completely wipe...
I was already running an unbranded stock firmware on it, but after the complete wipe i wanted to install JB 4.2.2 S5 - I usually unlock the bootloader, install clockworks, copy the original unedited complete firmware zip on it and install it via the recovery, then relock the bootloader and job done, but I cannot seem to find a complete unedited rom, is either RUU.exe (which I cannot run as the PC wont see the phone due to no firmware on it, I think) or nandrom backups which I don't really want, all the OTA ones seem to just be updates and am stuck with a phone that only has clockwork recovery on it....
Where can I get an official unedited zip that I can install via clockworks?
Thanks
Click to expand...
Click to collapse
Give the result from command fastboot getvar version-main

Thant said:
Give the result from command fastboot getvar version-main
Click to expand...
Click to collapse
version-main: 3.16.110.4
cidnum: T-MOB005
But as I said, I want a non branded, complete flash room please

LondonVirus said:
version-main: 3.16.110.4
cidnum: T-MOB005
But as I said, I want a non branded, complete flash room please
Click to expand...
Click to collapse
sorry fastboot getvar all and delte your S/N and IMEI from the info I didn't read what you wamt you want rom with sense 5 give the result to see your hboot version

Thant said:
sorry fastboot getvar all and delte your S/N and IMEI from the info I didn't read what you wamt you want rom with sense 5 give the result to see your hboot version
Click to expand...
Click to collapse
C:\Android\sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.163R.30
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.16.110.4
(bootloader) serialno: -
(bootloader) imei: -
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: T-MOB005
(bootloader) battery-status: low
(bootloader) battery-voltage: 3446mV
(bootloader) devpower: 0
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.826s
Sorry it took me a while... life and kids eh lol... I am trying to sort this phone for the MRS, I have a Galaxy S5, great device
I must say I would even be happy with the TMO UK RUU, this pone is doing my head in at the moment and really don't have the time to be messing with it now, just need it working...
I wanted to change Super CID it but apparently it will need to be s-off and cant get round to do that, I wanted to install a non branded RUU but this is not allowed due to the wrong CID arg, stupid phones, was easier to flash unbranded firmware to old Nokia on Symbian...

LondonVirus said:
C:\Android\sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.163R.30
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.16.110.4
(bootloader) serialno: -
(bootloader) imei: -
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: T-MOB005
(bootloader) battery-status: low
(bootloader) battery-voltage: 3446mV
(bootloader) devpower: 0
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.826s
Sorry it took me a while... life and kids eh lol... I am trying to sort this phone for the MRS, I have a Galaxy S5, great device
I must say I would even be happy with the TMO UK RUU, this pone is doing my head in at the moment and really don't have the time to be messing with it now, just need it working...
I wanted to change Super CID it but apparently it will need to be s-off and cant get round to do that, I wanted to install a non branded RUU but this is not allowed due to the wrong CID arg, stupid phones, was easier to flash unbranded firmware to old Nokia on Symbian...
Click to expand...
Click to collapse
You have good hboot for sense 5 rom 4.2.2 install MaximusHD or ARHD or any sense 5 rom and you are ready to go.

I wanted a stock ROM, the Mrs is not very technical minded lol and a customer ROM won't help her, either TMO UK or in branded, where can I get the RUU for it?
Thanks all

Unfortunately T-Mobile skipped the sense 5, 4.2.2 update, I have the same device and cid and called them countless times, spoke to managers and had it escalated to the highest level only to be told they would not be updating past 4.1.1
Every other network pushed that but them, if you stick to stock T-Mobile ROM you would be missing 2 very important updates, one being the heartbleed patch.
Just grab MaximusHD from the development forum, its the best sense 5 ROM out there and has important ota updates too.

I suppose I will have install it via the custom recovery, could I not install the unbranded RUU 4.2.2? Does anyone know how to s-off correctly, so that I can change the CID.
By the way thank you all for your replies

LondonVirus said:
I suppose I will have install it via the custom recovery, could I not install the unbranded RUU 4.2.2? Does anyone know how to s-off correctly, so that I can change the CID.
By the way thank you all for your replies
Click to expand...
Click to collapse
NO S-OFF for HOX

Thant said:
NO S-OFF for HOX
Click to expand...
Click to collapse
I assume that HOX means Htc One X lol... so I will not be able to change the CID?
Any "re-pack" unedited versions of the genuine unbranded europe RUU that I can install via custom recovery?
Thanks again all

There must be a way to s-off the Maximus HD ROM says "1. Make sure your device is unlocked or have s-off"
Why would it say that on "http://forum.xda-developers.com/showthread.php?t=2410320" if there was no s-off ways? am confused lol

LondonVirus said:
There must be a way to s-off the Maximus HD ROM says "1. Make sure your device is unlocked or have s-off"
Why would it say that on "http://forum.xda-developers.com/showthread.php?t=2410320" if there was no s-off ways? am confused lol
Click to expand...
Click to collapse
Don't be confused mate..HOX can s-off but via java card( will cost money to make it).In here no have chance to be s-off.

Installation of Maximus HD no hanging on this screen, flashed Kernel and wiped the memory fkn phones!

LondonVirus said:
Installation of Maximus HD no hanging on this screen, flashed Kernel and wiped the memory fkn phones!
Click to expand...
Click to collapse
Never mind, seems to have worked lol

LondonVirus said:
Never mind, seems to have worked lol
Click to expand...
Click to collapse
Phone hanging on boot screen don't know why...

LondonVirus said:
Phone hanging on boot screen don't know why...
Click to expand...
Click to collapse
are you flashed the boot.img from maximushd archive via fastboot with the command fastboot flash boot boot.img

Thant said:
are you flashed the boot.img from maximushd archive via fastboot with the command fastboot flash boot boot.img
Click to expand...
Click to collapse
Thank you for your reply, I did flash the boot via the "Kernel+Flasher+21.0.0" looking at the coding inside the batch file, it calls a batch in a sub-folder with the command fastboot flash boot boot.img, and I did run it and got Okay message in the command window...

LondonVirus said:
Thank you for your reply, I did flash the boot via the "Kernel+Flasher+21.0.0" looking at the coding inside the batch file, it calls a batch in a sub-folder with the command fastboot flash boot boot.img, and I did run it and got Okay message in the command window...
Click to expand...
Click to collapse
do it manually like I write you in my post not with flasher or tool

Thant said:
do it manually like I write you in my post not with flasher or tool
Click to expand...
Click to collapse
---------------------------------------------------------------------------------------------------------------------
C:\Android\sdk\platform-tools>fastboot flash zip rom.zip
sending 'zip' (716000 KB)...
OKAY [ 90.451s]
writing 'zip'...
(bootloader) Can not find [android-info.txt] in zipped image!
FAILED (remote: 24 parsing android-info fail)
finished. total time: 125.830s
---------------------------------------------------------------------------------------------------------------------
fastboot oem rebootRUU
fastboot flash zip rom.zip <----- This is Maximus HD....
and this is after a flashed the correct kernel/boot.img....