HTC One X Stock Firmware JB 4.2.2 S5 - HTC One X

Hi Guys,
It's been a while since I wrote on this forum... I may be tired, but I can't work out a few things:
I have a T-Mobile UK HTC One X, due to some circumstances I needed to completely wipe...
I was already running an unbranded stock firmware on it, but after the complete wipe i wanted to install JB 4.2.2 S5 - I usually unlock the bootloader, install clockworks, copy the original unedited complete firmware zip on it and install it via the recovery, then relock the bootloader and job done, but I cannot seem to find a complete unedited rom, is either RUU.exe (which I cannot run as the PC wont see the phone due to no firmware on it, I think) or nandrom backups which I don't really want, all the OTA ones seem to just be updates and am stuck with a phone that only has clockwork recovery on it....
Where can I get an official unedited zip that I can install via clockworks?
Thanks

LondonVirus said:
Hi Guys,
It's been a while since I wrote on this forum... I may be tired, but I can't work out a few things:
I have a T-Mobile UK HTC One X, due to some circumstances I needed to completely wipe...
I was already running an unbranded stock firmware on it, but after the complete wipe i wanted to install JB 4.2.2 S5 - I usually unlock the bootloader, install clockworks, copy the original unedited complete firmware zip on it and install it via the recovery, then relock the bootloader and job done, but I cannot seem to find a complete unedited rom, is either RUU.exe (which I cannot run as the PC wont see the phone due to no firmware on it, I think) or nandrom backups which I don't really want, all the OTA ones seem to just be updates and am stuck with a phone that only has clockwork recovery on it....
Where can I get an official unedited zip that I can install via clockworks?
Thanks
Click to expand...
Click to collapse
Give the result from command fastboot getvar version-main

Thant said:
Give the result from command fastboot getvar version-main
Click to expand...
Click to collapse
version-main: 3.16.110.4
cidnum: T-MOB005
But as I said, I want a non branded, complete flash room please

LondonVirus said:
version-main: 3.16.110.4
cidnum: T-MOB005
But as I said, I want a non branded, complete flash room please
Click to expand...
Click to collapse
sorry fastboot getvar all and delte your S/N and IMEI from the info I didn't read what you wamt you want rom with sense 5 give the result to see your hboot version

Thant said:
sorry fastboot getvar all and delte your S/N and IMEI from the info I didn't read what you wamt you want rom with sense 5 give the result to see your hboot version
Click to expand...
Click to collapse
C:\Android\sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.163R.30
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.16.110.4
(bootloader) serialno: -
(bootloader) imei: -
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: T-MOB005
(bootloader) battery-status: low
(bootloader) battery-voltage: 3446mV
(bootloader) devpower: 0
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.826s
Sorry it took me a while... life and kids eh lol... I am trying to sort this phone for the MRS, I have a Galaxy S5, great device
I must say I would even be happy with the TMO UK RUU, this pone is doing my head in at the moment and really don't have the time to be messing with it now, just need it working...
I wanted to change Super CID it but apparently it will need to be s-off and cant get round to do that, I wanted to install a non branded RUU but this is not allowed due to the wrong CID arg, stupid phones, was easier to flash unbranded firmware to old Nokia on Symbian...

LondonVirus said:
C:\Android\sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.163R.30
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.16.110.4
(bootloader) serialno: -
(bootloader) imei: -
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: T-MOB005
(bootloader) battery-status: low
(bootloader) battery-voltage: 3446mV
(bootloader) devpower: 0
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.826s
Sorry it took me a while... life and kids eh lol... I am trying to sort this phone for the MRS, I have a Galaxy S5, great device
I must say I would even be happy with the TMO UK RUU, this pone is doing my head in at the moment and really don't have the time to be messing with it now, just need it working...
I wanted to change Super CID it but apparently it will need to be s-off and cant get round to do that, I wanted to install a non branded RUU but this is not allowed due to the wrong CID arg, stupid phones, was easier to flash unbranded firmware to old Nokia on Symbian...
Click to expand...
Click to collapse
You have good hboot for sense 5 rom 4.2.2 install MaximusHD or ARHD or any sense 5 rom and you are ready to go.

I wanted a stock ROM, the Mrs is not very technical minded lol and a customer ROM won't help her, either TMO UK or in branded, where can I get the RUU for it?
Thanks all

Unfortunately T-Mobile skipped the sense 5, 4.2.2 update, I have the same device and cid and called them countless times, spoke to managers and had it escalated to the highest level only to be told they would not be updating past 4.1.1
Every other network pushed that but them, if you stick to stock T-Mobile ROM you would be missing 2 very important updates, one being the heartbleed patch.
Just grab MaximusHD from the development forum, its the best sense 5 ROM out there and has important ota updates too.

I suppose I will have install it via the custom recovery, could I not install the unbranded RUU 4.2.2? Does anyone know how to s-off correctly, so that I can change the CID.
By the way thank you all for your replies

LondonVirus said:
I suppose I will have install it via the custom recovery, could I not install the unbranded RUU 4.2.2? Does anyone know how to s-off correctly, so that I can change the CID.
By the way thank you all for your replies
Click to expand...
Click to collapse
NO S-OFF for HOX

Thant said:
NO S-OFF for HOX
Click to expand...
Click to collapse
I assume that HOX means Htc One X lol... so I will not be able to change the CID?
Any "re-pack" unedited versions of the genuine unbranded europe RUU that I can install via custom recovery?
Thanks again all

There must be a way to s-off the Maximus HD ROM says "1. Make sure your device is unlocked or have s-off"
Why would it say that on "http://forum.xda-developers.com/showthread.php?t=2410320" if there was no s-off ways? am confused lol

LondonVirus said:
There must be a way to s-off the Maximus HD ROM says "1. Make sure your device is unlocked or have s-off"
Why would it say that on "http://forum.xda-developers.com/showthread.php?t=2410320" if there was no s-off ways? am confused lol
Click to expand...
Click to collapse
Don't be confused mate..HOX can s-off but via java card( will cost money to make it).In here no have chance to be s-off.

Installation of Maximus HD no hanging on this screen, flashed Kernel and wiped the memory fkn phones!

LondonVirus said:
Installation of Maximus HD no hanging on this screen, flashed Kernel and wiped the memory fkn phones!
Click to expand...
Click to collapse
Never mind, seems to have worked lol

LondonVirus said:
Never mind, seems to have worked lol
Click to expand...
Click to collapse
Phone hanging on boot screen don't know why...

LondonVirus said:
Phone hanging on boot screen don't know why...
Click to expand...
Click to collapse
are you flashed the boot.img from maximushd archive via fastboot with the command fastboot flash boot boot.img

Thant said:
are you flashed the boot.img from maximushd archive via fastboot with the command fastboot flash boot boot.img
Click to expand...
Click to collapse
Thank you for your reply, I did flash the boot via the "Kernel+Flasher+21.0.0" looking at the coding inside the batch file, it calls a batch in a sub-folder with the command fastboot flash boot boot.img, and I did run it and got Okay message in the command window...

LondonVirus said:
Thank you for your reply, I did flash the boot via the "Kernel+Flasher+21.0.0" looking at the coding inside the batch file, it calls a batch in a sub-folder with the command fastboot flash boot boot.img, and I did run it and got Okay message in the command window...
Click to expand...
Click to collapse
do it manually like I write you in my post not with flasher or tool

Thant said:
do it manually like I write you in my post not with flasher or tool
Click to expand...
Click to collapse
---------------------------------------------------------------------------------------------------------------------
C:\Android\sdk\platform-tools>fastboot flash zip rom.zip
sending 'zip' (716000 KB)...
OKAY [ 90.451s]
writing 'zip'...
(bootloader) Can not find [android-info.txt] in zipped image!
FAILED (remote: 24 parsing android-info fail)
finished. total time: 125.830s
---------------------------------------------------------------------------------------------------------------------
fastboot oem rebootRUU
fastboot flash zip rom.zip <----- This is Maximus HD....
and this is after a flashed the correct kernel/boot.img....

Related

[Q] OTA doesn't match my RUU? HTC One X

Can anyone help and explain the process for me to have an up to date 4.2.2 Android HTC One X?
Basically I had previously tried to install Viper X on my HTC One X with total failure - phone is rooted & unlocked SIM.
So I had to learn the hard way and found a RUU that worked on the phone after flashing it - however the OTA will not install 1. On it's own 2. Manually via CWM.
There is an error via CWM when trying to update OTA_ENDEAVOR_U_JB_50_S_H3G_UK_4.18.771.4-3.14.771.34_release_3327518r9ohuh8uqo0olne.zip I guess it is telling me it's not the same CID?
My CID is H3G_001 currently although I am not sure that this is the correct one for my phone - it was the only RUU I could find that worked!
So I ask:
1. Is there available an update that I can manually install for my RUU? and where can I find it?
2. Is there another stock recovery RUU I can install and then update the OTA my phone has downloaded? and if so where can I download it and how do I install?
Really hoping you guys can help?
PS - Does my RUU have to be branded to 3 (Three) ? Can it not be a Tmobile stock ROM as that's whom I am with?
Fingers crossed someone has the answer . . . . .
To be able to receive the 4.2.2 you need following things:
Stock Rom
Stock Kernel
Stock Recovery
Unlocked/Relocked/Locked bootlaoder doesn't matter.
Patience
Root will be lost after OTA.
If you have all of this you just have to wait for it to arrive for your CID.
For now it's only out on WWE cids and some Vodaphone ones...
To get the stock rom ether restore a nandroid or install a RUU for 4.0.3 or higher, and update it to 4.1.1.
Then it's just waiting...
Alternatively you could flash the stock WWE version that you can get at the ARHD thread, but it's better to wait for the OTA as it will update the hboot as well
desmond1303 said:
To be able to receive the 4.2.2 you need following things:
Stock Rom
Stock Kernel
Stock Recovery
Unlocked/Relocked/Locked bootlaoder doesn't matter.
Patience
Root will be lost after OTA.
If you have all of this you just have to wait for it to arrive for your CID.
For now it's only out on WWE cids and some Vodaphone ones...
To get the stock rom ether restore a nandroid or install a RUU for 4.0.3 or higher, and update it to 4.1.1.
Then it's just waiting...
Alternatively you could flash the stock WWE version that you can get at the ARHD thread, but it's better to wait for the OTA as it will update the hboot as well
Click to expand...
Click to collapse
Cheers for the info - problem is I am unsure which stock rom to use and where to get it from - any idea's? - I tried a few previously by guesswork but then had issues like no Wi-Fi or No signal etc - the one I have now was the only one that worked - CID H3G_UK - not sure which operator it was on. Can you point me to a good stock rom where I can start?
JRNY2112 said:
Cheers for the info - problem is I am unsure which stock rom to use and where to get it from - any idea's? - I tried a few previously by guesswork but then had issues like no Wi-Fi or No signal etc - the one I have now was the only one that worked - CID H3G_UK - not sure which operator it was on. Can you point me to a good stock rom where I can start?
Click to expand...
Click to collapse
The one I am using at the moment is H3G_001 and its a 3 Three ROM maybe if I put H3G_UK on it I would get all the updates again?
post the results of fastboot getvar all
nogotaclue said:
post the results of fastboot getvar all
Click to expand...
Click to collapse
Here you go:
By the way the CID is H3G_001
C:\>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.164.30H
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.771.34
(bootloader) serialno: xxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxx
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: H3G__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3857mV
(bootloader) devpower: 61
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.895s
C:\>
this is a nandroid for your cid and main version https://docs.google.com/file/d/0B6Nhau4n1i__NWN6VTQxcWgzbkk/edit from matt95's thread. follow his instructions and Don't forgot to flash the stock recovery once the nandroid is installed. once all that is done you should be able to OTA to 4.2.2.
Edit:- oh and ignore the virus warning, it's just because it's too big for google drive to scan
The same problem
Hey everyone,
I have almost the same problem. everyone is receiving the OTA update except me. I emailed the HTC support center and they said since my phone was purchased in Singapore I won't get the update. (Even though I live in the UK)
So, does anyone know how I should change my ROM to a UK version so I get the update? (I'm not very technical, please someone explain to me in simple words)
Thank you everyone in advance.

Hi, need some help

Ive been reading this section of the forum for 2 nights now. read various threads and none the wiser.
Ive unlocked my htc one x using the windroid htc one app which worked fine, but installing a rom was not as easy. now < i admit, i dived in and installed a ROM without seeing what else it needs to work ( am used to flashing nexus roms) and now its stuck at the HTC screen. Now i've tried various ways to rectify the proplem. uisng various roms, flashing boot.img before flashing the rom, no go. tried older roms, no go.
I know the hboot needs updating, but without a cid id then i cant find a matching firmware.zip.
Ive tried to do a RUU boot by locking the bootloader but get this:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash zip rom.zip
sending 'zip' (153709 KB)...
OKAY [ 19.444s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 29.009s
So am at a loss and asking for help.
(bootloader) version: 0.5a
(bootloader) version-bootloader: 0.95.0000
(bootloader) version-baseband: 2.1204.135.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.11
(bootloader) serialno: HT
(bootloader) imei:
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: None
(bootloader) battery-status: good
(bootloader) battery-voltage: 3990mV
(bootloader) devpower: 82
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
hope the above info helps.
ajg008 said:
Ive been reading this section of the forum for 2 nights now. read various threads and none the wiser.
Ive unlocked my htc one x using the windroid htc one app which worked fine, but installing a rom was not as easy. now < i admit, i dived in and installed a ROM without seeing what else it needs to work ( am used to flashing nexus roms) and now its stuck at the HTC screen. Now i've tried various ways to rectify the proplem. uisng various roms, flashing boot.img before flashing the rom, no go. tried older roms, no go.
I know the hboot needs updating, but without a cid id then i cant find a matching firmware.zip.
Ive tried to do a RUU boot by locking the bootloader but get this:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash zip rom.zip
sending 'zip' (153709 KB)...
OKAY [ 19.444s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 29.009s
So am at a loss and asking for help.
(bootloader) version: 0.5a
(bootloader) version-bootloader: 0.95.0000
(bootloader) version-baseband: 2.1204.135.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.11
(bootloader) serialno: HT
(bootloader) imei:
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: None
(bootloader) battery-status: good
(bootloader) battery-voltage: 3990mV
(bootloader) devpower: 82
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
hope the above info helps.
Click to expand...
Click to collapse
Lock your bootloader fastboot oem lock after this run RUU 1.29.401.11 as administrator and follow the instruction. After RUU finish update the phone to latest JB from Settings/About/Software Updates!
Report back
thanks. Downloading now, will try when i return home from work
Thant said:
Lock your bootloader fastboot oem lock after this run as administrator and follow the instruction. After RUU finish update the phone to latest JB from Settings/About/Software Updates!
Report back
Click to expand...
Click to collapse
thanks for your help that got the phone back to booting properly
I flashed it and it worked. I got myself back to the latest update. Now i tried various roms again as i'm one for experimenting but some of the newest ones dont seem to want to work.
ones i've tried>
Android_Revolution_HD-One_X_33.1
HTC_One_X_-_MaximusHD_21.0.0
OneX The Next Chapter! v1.2
but none of them worked for me.
So i went lower with
cm-10.1.3-endeavoru which worked
then updated to
cm-10.2.0-endeavoru and flashed the boot.img for it to work.
Now for the other roms, what am i missing? is it the firmware.zip? hboot level?
Am bowing down to Thant, and hoping he can tell a mere minion what he's doing wrong
I don't think you updated far enough ! Post the outcome of :
Fastboot getvar version-main
Edit :
I see thant is offline, so i chip in......
Mr Hofs said:
I don't think you updated far enough ! Post the outcome of :
Fastboot getvar version-main
Edit :
I see thant is offline, so i chip in......
Click to expand...
Click to collapse
the result is:
version-main: 2.17.401.2
What i thought. You need to run another ruu and update many more ota's
Here is the ruu
http://www.persianhtc.net/index.php...Radio_2.1204.135.20_release_274900_signed.exe
Mr Hofs said:
What i thought. You need to run another ruu and update many more ota's
Here is the ruu
[ul]h*tp://w*w.persianhtc.net/index.php?dir=One%20X%28Endeavor%29/rom/original/exe/&file=RUU_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2_Radio_2.1204.135.20_release_274900_signed.exe[/url]
Click to expand...
Click to collapse
downloading now, but need sleep now and will report back tomorrow.
thanks very much for your help.
bows to Mr Hofs
Same here.
cyanogenmod stable rom not recognising sim, and not being recognised by htc sync
Hi i just unlocked and rooted my phone. one of the first things i did after having rooted it was go into rom-manager and download the highest rated cyanogen mod stable rom...expecting it to reboot itself and do the update automatically once id downloaded the file i was suprised when nothing happened...so i put it into recovery mode myself and searched the phone's storage for the rom file...it was infact two files, one the rom, the other gapps...i installed both of them and rebooted the phone...at first i was left on cyanogenmod bootloop...after a few restarts, and factory resets, i eventually got past the cyanogen mod intro wheel, to its actual introduction *asking me to choose a language*, as soon i choose my language i get notification asking me to insert my simcard (it already is, OF COURSE...), as i go through the rest of the setup there is no network coverage or internet..so i cant simply download rom-manager and try another flash..it also wont come up as a recognised device on my macbook...ive downloaded another flash of cyanogenmod on my laptop along with a new gapps, but im utterly lost about what to do now...i cant even put them on the phone....
wud love any help
The recovery version I'm using is clockworkMod Recovery v5.8.2.7
And here is my bootloader
ENDEAVORU PVT SHIP 2-ON RL
HBOOT-1.72.0000
CPLD-None
RADIO-5.1204.167.31
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
MODEM PATH: OFF
Jun 21 2013,18:24:21
tekkr said:
Hi i just unlocked and rooted my phone. one of the first things i did after having rooted it was go into rom-manager and download the highest rated cyanogen mod stable rom...expecting it to reboot itself and do the update automatically once id downloaded the file i was suprised when nothing happened...so i put it into recovery mode myself and searched the phone's storage for the rom file...it was infact two files, one the rom, the other gapps...i installed both of them and rebooted the phone...at first i was left on cyanogenmod bootloop...after a few restarts, and factory resets, i eventually got past the cyanogen mod intro wheel, to its actual introduction *asking me to choose a language*, as soon i choose my language i get notification asking me to insert my simcard (it already is, OF COURSE...), as i go through the rest of the setup there is no network coverage or internet..so i cant simply download rom-manager and try another flash..it also wont come up as a recognised device on my macbook...ive downloaded another flash of cyanogenmod on my laptop along with a new gapps, but im utterly lost about what to do now...i cant even put them on the phone....
wud love any help
The recovery version I'm using is clockworkMod Recovery v5.8.2.7
And here is my bootloader
ENDEAVORU PVT SHIP 2-ON RL
HBOOT-1.72.0000
CPLD-None
RADIO-5.1204.167.31
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
MODEM PATH: OFF
Jun 21 2013,18:24:21
Click to expand...
Click to collapse
Rom manager not working on S-ON devices flash the boot.img manually from fastboot with command fastboot flash boot boot.img take the boot.img from rom arhiv wich you want to install
Thant said:
Rom manager not working on S-ON devices flash the boot.img manually from fastboot with command fastboot flash boot boot.img take the boot.img from rom arhiv wich you want to install
Click to expand...
Click to collapse
the reason i'm so frustrated is aside from the supposedly stable build of cyanogen mod i downloaded in rommanager not working, the rom doesnt recognise my sim, i dont have access to the internet, so i cant simply download a new rom to flash straight from rom manager...as well as this the wifi doesn't seem to work on this flash...and to make matters worse it's not being recognised by the drivers...i'm using htc sync manager..when i plug in the phone it will open htc sync manager but wont show that a phone is paired to my macbook
...when u say manually can i do this directly from my phone or do i need to connect it to a computer?
You must connect it to PC..And then go to fastboot and flash boot.img file..Then you will have signal,wifi etc..
big noob said:
You must connect it to PC..And then go to fastboot and flash boot.img file..Then you will have signal,wifi etc..
Click to expand...
Click to collapse
its not being recognised as a device since i flashed the *cyanogen mod stable rom*...i plugged it to my computer though, and put it into fastboot and it says FASTBOOT USB...the options it gives me from here are
HBOOT
REBOOT
REBOOT BOOTLOADER
POWER DOWN
Here is guide how to use ADB on macbook:
http://forum.xda-developers.com/showthread.php?t=1917237
And then you can use fastboot commands..
Mr Hofs said:
What i thought. You need to run another ruu and update many more ota's
Here is the ruu
[ul]ht*p://w*w.persianhtc.net/index.php?dir=One%20X%28Endeavor%29/rom/original/exe/&file=RUU_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2_Radio_2.1204.135.20_release_274900_signed.exe[/url]
Click to expand...
Click to collapse
ive tried that but keep getting signature error
ajg008 said:
ive tried that but keep getting signature error
Click to expand...
Click to collapse
Relocked the bootloader ?
Mr Hofs said:
Relocked the bootloader ?
Click to expand...
Click to collapse
yep fastboot oem lock
Then it might be easier to flash the 3.14.401 firmware to upgrade the hboot to 1.39. Then you can flash any rom you want, and there is also a ruu for that. Sorry i have no time to explain now (heading home from work)
Look for the firmware placeholder thread, read the instructions and download the 3.14.401 firmware.zip from there.
http://forum.xda-developers.com/showthread.php?t=1957376
Mr Hofs said:
Then it might be easier to flash the 3.14.401 firmware to upgrade the hboot to 1.39. Then you can flash any rom you want, and there is also a ruu for that. Sorry i have no time to explain now (heading home from work)
Look for the firmware placeholder thread, read the instructions and download the 3.14.401 firmware.zip from there.
[rl]htp://forum.xda-developers.com/showthread.php?t=1957376[/url]
Click to expand...
Click to collapse
i already had the ota 3.14.401 and got the firmware.zip from there.
its installed fine and i now can put most roms onto it.
:victory: thank you Mr Hofs
So i get this right in my head. The phones firmware.zip needed updated so it would update hboot and other things.
Now to flash roms is the procedure to flash the boot.img contained inside first then install the rom <----which is they way ive being doing it

wi-fi not working on M8

Hello,
I want to buy a second hand HTC M8 and it has a issue with wi-fi.. it won't turn on or connect to wi-fi. from the screen shots i see that it has network (3g network). the guy selling the m8 says that a friend of his tried to put a custom rom on the phone and after that the wifi stopped working. here are the printscreens send by him. could you tell me if i can repair it myself or it is the wi-fi chip damaged.
Wifi doesn't work because the ROM is 4.4.4 but device is still 4.4.2
(can see this from the baseband version)
You can easily fix this by put in correct ROM version
can it be done without s-off? with a ruu.exe?
This s the bootloader
cabasse_tronic said:
can it be done without s-off? with a ruu.exe?
Click to expand...
Click to collapse
No need S-Off.
Get info on fastboot getvar all for this device then we will know whether to use RUU or stock backup
i'll buy it tonight and after that we'll be talking here hope for the best. thanks guys.
cabasse_tronic said:
i'll buy it tonight and after that we'll be talking here hope for the best. thanks guys.
Click to expand...
Click to collapse
You better remove the 3rd pic where it shows the IMEI no. & Serial No. Those are sensitive data.
Anyway ... checked your IMEI, it is a EU version, so there is a RUU available which you can directly update it to the latest Lollipop version 4.16.401.10
thanks. will remove those pictures. i will but it tonight.
Is it for a good price due to WiFi not working? If so, the devil on my right shoulder says it serves them right for modding the phone without doing the proper research! Or researching properly to (easily) fix the problem, for that matter.
the price is ok. my old htc m7 + 100 euro
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.00
(bootloader) version-baseband: 1.15.213315
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH4xxxxxxxxxxxxx
(bootloader) imei: 35xxxxxxxxxxxxxxx
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: VODAP001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.053s
Help me to get it stock please !!
Remove serial no. in your post
I'll write simple guide on how to get back on stock and update to the latest lollipop when I'm home in next 3 - 4 hrs (if no one attend to this yet)
i see that the phone has Vodap001 CID but the soft on it (rooted one) is for the HTC_00x CID.. problem? i have got a stock backup, unzipped it, putted in TWRP backup folder, now i restore it and after that flash the stock recovery?? is that all?
It's a Vodafone UK M8, but still easy restored to stock
To be honest, I'd get it back to 1.54.161.x using the backups @ckpv5 will post, S-OFF with Sunshine and then convert it to the unbranded handset using the 4.16.401.10 RUU (using the guide in my signature)
skirmish please .. one m7 i could do it with no problem but this guy kills me
Can't write proper guide as I'm driving....
Follow this guide : http://forum.xda-developers.com/showpost.php?p=59034701&postcount=4
But don't use that 3.29.161.9, you need to restore 1.54.161.10 and its recovery then proceed multiple OTA up to lollipop 4.19.161.2
You can get the needed files here : http://forum.xda-developers.com/showpost.php?p=58606328&postcount=4278
Note : if you have plan to S-Off your device, do it after restore 1.54.161.10
if you want to keep it S-On, just proceed OTA. Later you can install any custom lollipop ROM if you want to
fastboot flash recovery open. img ... stuck on entering recovery.. sweet as hell
cabasse_tronic said:
fastboot flash recovery open. img ... stuck on entering recovery.. sweet as hell
Click to expand...
Click to collapse
Don't use version 2.8.4.0 or 2.8.5.0
Try 2.8.1.0
ckpv5 said:
Don't use version 2.8.4.0 or 2.8.5.0
Try 2.8.1.0
Click to expand...
Click to collapse
You are my guardian angel.. another one ) unrar the backup like in that short tutorial, putted in the backup folder.. twrp doen't see it.. can't restore..
cabasse_tronic said:
Hello,
I want to buy a second hand HTC M8 and it has a issue with wi-fi.. it won't turn on or connect to wi-fi. from the screen shots i see that it has network (3g network). the guy selling the m8 says that a friend of his tried to put a custom rom on the phone and after that the wifi stopped working. here are the printscreens send by him. could you tell me if i can repair it myself or it is the wi-fi chip damaged.
Click to expand...
Click to collapse
you could follow my guide on the viperone thread , steps 1 to 6 would get you onto stock android lollipop with a stock recovery , just do a full setup at step 6 , my guide proceeds past this point to then install a custom recovery and a custom rom but if you stop at step 6 after setting up the phone you will be unbranded stock
hope this helps
http://forum.xda-developers.com/showpost.php?p=59055916&postcount=20651

[Q] HTC One m8 fingerprint update error

Helllo there!
I'm making a new thread because I couldn't find anyone with the exact same problem and don't want to brick my phone or such.
Now to the problem: every time I try to update my HTC one m8 (Europe) it stops when installling and tells me this:
Code:
Finding update package...
Opening update package...
Verifying update package...
Installing update...
L50QCT.01.101.007
Package expects build fingerprint of htc/htc_europe/htc_m8:4.4.4/KTU84P/389838.9:user/release-keys
or htc/htc_europe/htc_m8:5.0.1/LRX22C/448934.10:user/release-keys;
this device has htc/htc_europe/htc_m8:4.4.4/KTU84P/389838.6:user/release-keys.
Installation aborted.
Write host_mode 0 done
getvar all:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.22.21331147A1.29G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.28.401.9
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
The phone is rooted, the bootloader unlocked, it has the stock recovery, it's s-on and it says "software status: modified".
The only thing I can see in the error is that this nine:
Code:
htc/htc_europe/htc_m8:4.4.4/KTU84P/389838.[B][U]9[/U][/B]:user/release-keys
is a six
Code:
htc/htc_europe/htc_m8:4.4.4/KTU84P/389838.[B][U]6[/U][/B]:user/release-keys
on mine.
I am pretty new here still, so i don't know how to fix it, and i don't want to break it.
Best regards
Schmix
Root phone
vinayluck said:
Root phone
Click to expand...
Click to collapse
What are you trying to say?
Schmix said:
What are you trying to say?
Click to expand...
Click to collapse
You should post your getvar all (deleting your imei number and S./N ) there is a post here but it is in german with the same problem which points to an incorrect recovery!
http://www.android-hilfe.de/wiederh...ge-expects-build-fingerprint-fingerprint.html
Shepps
vinayluck said:
Root phone
Click to expand...
Click to collapse
Being rooted or not has no bearing on OTA update.
Also, it seems that you are trying to tell the OP to root (not completely clear, with the 2 word post), when he clearly states he is already rooted.
Getvar info added!
By the way, the other guy had a different problem.
Has anyone got an idea of whats wrong?
Schmix said:
Helllo there!
I'm making a new thread because I couldn't find anyone with the exact same problem and don't want to brick my phone or such.
Now to the problem: every time I try to update my HTC one m8 (Europe) it stops when installling and tells me this:
Code:
Finding update package...
Opening update package...
Verifying update package...
Installing update...
L50QCT.01.101.007
Package expects build fingerprint of htc/htc_europe/htc_m8:4.4.4/KTU84P/389838.9:user/release-keys
or htc/htc_europe/htc_m8:5.0.1/LRX22C/448934.10:user/release-keys;
this device has htc/htc_europe/htc_m8:4.4.4/KTU84P/389838.6:user/release-keys.
Installation aborted.
Write host_mode 0 done
getvar all:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.22.21331147A1.29G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.28.401.9
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
The phone is rooted, the bootloader unlocked, it has the stock recovery, it's s-on and it says "software status: modified".
The only thing I can see in the error is that this nine:
Code:
htc/htc_europe/htc_m8:4.4.4/KTU84P/389838.[B][U]9[/U][/B]:user/release-keys
is a six
Code:
htc/htc_europe/htc_m8:4.4.4/KTU84P/389838.[B][U]6[/U][/B]:user/release-keys
on mine.
I am pretty new here still, so i don't know how to fix it, and i don't want to break it.
Best regards
Schmix
Click to expand...
Click to collapse
Download and run the 3.28.401.10 RUU first (a quick search here and you'll find it), then run this one.
Schmix said:
Getvar info added!
By the way, the other guy had a different problem.
Has anyone got an idea of whats wrong?
Click to expand...
Click to collapse
Wrong stock recovery image.
OTA needs stock recovery 3.28.401.9 (389838.9) or 4.16.401.10 (448934.10)
but you installed 3.28.401.6 (389838.6)
Get the right recovery image, OTA will proceed.
I have one here - 3.28.401.9_recovery.img : http://sourceforge.net/projects/htconem8/files/Recovery/3.28.401.9_recovery.img/download
ckpv5 said:
Wrong stock recovery image.
OTA needs stock recovery 3.28.401.9 (389838.9) or 4.16.401.10 (448934.10)
but you installed 3.28.401.6 (389838.6)
Get the right recovery image, OTA will proceed.
I have one here - 3.28.401.9_recovery.img : http://sourceforge.net/projects/htconem8/files/Recovery/3.28.401.9_recovery.img/download
Click to expand...
Click to collapse
Okay thank you so far!
But now it comes up with a different error; It says "/system/xbin/nc has unexpected contents".
Let me tell you the whole story:
Some time ago i installed busybox, xposed and xprivacy (and luckypatcher) and used it normaly.
Then the Lollipop update came around and since it wasnt working (giving out the unexpected contend error) i thought it would be a good idea to just do a factory reset.
It didnt work afterwards either, so i went here to ask what the problem was, and i was told it was because of xposed.
However, xposed wasn't installed anymore (the app), and (i think) the newer versions installed it somewhere else, so installing and then uninstalling (the button in the app) it didnt delete the old directory. (Btw. in an last attempt i tried installing the stick recovery and got the wrong one apparently)
So yeah, i have no idea on how to fix this problem, but i would be okay with having to reset my phone.
Schmix said:
But now it comes up with a different error; It says "/system/xbin/nc has unexpected contents".
So yeah, i have no idea on how to fix this problem, but i would be okay with having to reset my phone.
Click to expand...
Click to collapse
That's expected
There are a few methods to solve your problem.
The easiest one is RUU it back to stock.
Follow this thread : http://forum.xda-developers.com/showthread.php?t=2735235
You need to relock bootloader and also make a backup of your internal storage files/pic/music or whatever you like to keep.
The RUU will update your device to the latest
ckpv5 said:
That's expected
There are a few methods to solve your problem.
The easiest one is RUU it back to stock.
Follow this thread : http://forum.xda-developers.com/showthread.php?t=2735235
You need to relock bootloader and also make a backup of your internal storage files/pic/music or whatever you like to keep.
The RUU will update your device to the latest
Click to expand...
Click to collapse
But i don't have S-Off... is that a problem?
And are the files correct?
Schmix said:
But i don't have S-Off... is that a problem?
And are the files correct?
Click to expand...
Click to collapse
You don't have S-Off - that's why you need to relock bootloader
That's the only difference - read the thread thoroughly.
First step - relock bootloader with command fastboot oem lock
then follow the step 3 onwards
Also note you need to use htc_fastboot.exe not the usual fastboot.exe
Anything you need to ask, you can ask there. I believe @EddyOS will gladly help you
ckpv5 said:
You don't have S-Off - that's why you need to relock bootloader
That's the only difference - read the thread thoroughly.
First step - relock bootloader with command fastboot oem lock
then follow the step 3 onwards
Also note you need to use htc_fastboot.exe not the usual fastboot.exe
Anything you need to ask, you can ask there. I believe @EddyOS will gladly help you
Click to expand...
Click to collapse
Keep meaning to add a few bits that can be done with S-ON, been super busy of late!
ckpv5 said:
You don't have S-Off - that's why you need to relock bootloader
That's the only difference - read the thread thoroughly.
First step - relock bootloader with command fastboot oem lock
then follow the step 3 onwards
Also note you need to use htc_fastboot.exe not the usual fastboot.exe
Anything you need to ask, you can ask there. I believe @EddyOS will gladly help you
Click to expand...
Click to collapse
Thank you very much, I got it to work now!
Have a good day!
ckpv5 said:
Wrong stock recovery image.
OTA needs stock recovery 3.28.401.9 (389838.9) or 4.16.401.10 (448934.10)
but you installed 3.28.401.6 (389838.6)
Get the right recovery image, OTA will proceed.
I have one here - 3.28.401.9_recovery.img : http://sourceforge.net/projects/htconem8/files/Recovery/3.28.401.9_recovery.img/download
Click to expand...
Click to collapse
I have the same issue with my htc desire 820n can you help me pleas
ammarhigh said:
I have the same issue with my htc desire 820n can you help me pleas
Click to expand...
Click to collapse
I believe you do know this is M8 thread and not HTC Desire 820n
But .. this is what you can do to fix your problem ...
Check for OTA as usual, download OTA then select install later.
Connect your device to PC then copy the OTA zip from internal storage\download folder to PC
Open the OTA zip with 7-zip, you'll see firmware.zip. Open firmware.zip and extract out recovery.img <--- this is the one that you need.
Boot your device to bootloader
Fastboot flash this extracted recovery.img
Reboot, check for OTA again, this time select install now
Done
I'm sorry for posting here but i did it and it's not working when i'm flashing the recovery i tooked it from the OTA it's give me error when flashing it the update is lollipop and i'm on kitkat 4.4.4
Sent from my HTC Desire 820 using XDA Free mobile app

Various problems.!

Forget this sorted it all out, now running SRom ported lollipop with sense 7 from the M9. Hboot no red text and faux locked/original/son. Super CID.
For the record, it's always a firmware/dalvic cache problem (98%)
Hi Guys so Im rooted running Android Revoluton HD ROMs on an international O2 phone S-on
I thought I would wipe the entire phone, bleach it like a PC and reinstall.
Not a problem except various elements dont work.
I installed Stock ROM (I think KitKat)
I installed ARHD 22. (Kit Kat) everything worked
I installed ARHD 34.(Jellybean Sense 6) no wifi
I installed ARDH 40.(Jellybean Sense 7) no HTC TV
I installed ARHD 41.(Jellybean Sense7) no images in Blinkfeed?
I know its probably because I wiped the misc folder but up until I did a clean wipe I could use all of these roms without a glitch.
So is it firmware?
What do I need to put back on my phone for them all to work
I am S-on at the moment and I know that isnt whats stopping these roms working.
Any suggestions?
eskimosound said:
Hi Guys so Im rooted running Android Revoluton HD ROMs on an international O2 phone S-on
I thought I would wipe the entire phone, bleach it like a PC and reinstall.
Not a problem except various elements dont work.
I installed Stock ROM (I think KitKat)
I installed ARHD 22. (Kit Kat) everything worked
I installed ARHD 34.(Jellybean Sense 6) no wifi
I installed ARDH 40.(Jellybean Sense 7) no HTC TV
I installed ARHD 41.(Jellybean Sense7) no images in Blinkfeed?
I know its probably because I wiped the misc folder but up until I did a clean wipe I could use all of these roms without a glitch.
So is it firmware?
What do I need to put back on my phone for them all to work
I am S-on at the moment and I know that isnt whats stopping these roms working.
Any suggestions?
Click to expand...
Click to collapse
It's firmware. You most probably have kitkat firmware and lolipop based roms will mess up your wifi and stuff. Take an ota or stay on kitkat.
Thanks will try
Do I just flash the zip file?
Im sure I probs do
eskimosound said:
Thanks will try
Do I just flash the zip file?
Im sure I probs do
Click to expand...
Click to collapse
If you are S-ON don't flash firmware. Just don't. You can flash rom zips, recoveries, kernels. You can write on these partitions with s-on: recovery, boot, system and data.
I've just used Sunshine to get S-off, what a joy to use!
So now I can just flash them right?
I've got my cid number matched it up with the ota and bingo?
Right?
eskimosound said:
I've just used Sunshine to get S-off, what a joy to use!
So now I can just flash them right?
I've got my cid number matched it up with the ota and bingo?
Right?
Click to expand...
Click to collapse
well im come from HTC One M7, and as long as the M8 is pretty much the same, you dont need s-off to flash the same firmware which your already on, or the next one step up, after all, this is exactly what an OTA does for you.
However, now your s-off anyway, you canflash any RUU or firmware you like, just make sure cid and mid match first. :good:
EDIT: there ia also no need to lock or re-lock the bootloader to flash anything now that your S-off, leave it unlocked all the time for everything, its a common problem on the M7 forums at the moment, people who are s-off or even s-on, locking bootloaders with custom rom's or recovery's on thier phones.
Thanks, so with the ota there are two for O2 my cid is O2___001 am I right that I can take the 001 OR the 002?
eskimosound said:
Thanks, so with the ota there are two for O2 my cid is O2___001 am I right that I can take the 001 OR the 002?
Click to expand...
Click to collapse
in all honesty, I would of thought the CID 001 and 002 were in the same ota, have you checked the android-info.txt file within the OTA itself, its just a zip file.
possible to post your fastboot getvar all without imei and serial number please, also a link to the OTA's your downloading would be good.
Well I've just tried to flash both....I enter recovery instal zip right?
It's giving me an error.
Will tell you that info in a minute when I get on my pc
eskimosound said:
Well I've just tried to flash both....I enter recovery instal zip right?
It's giving me an error.
Will tell you that info in a minute when I get on my pc
Click to expand...
Click to collapse
personnaly, if your just trying to get to Lollipop, I would change my CID to HTC__001 (thats 2 underscores, CID is always 8 digits)
Change MID if required.
and then flash the WWE International Lollipop full RUU, piece of cake. http://forum.xda-developers.com/htc-one-m8/general/htc-one-m8-european-signed-ruu-0p6bimg-t2911563
But if the original isn't flashing what hope have I got with an HTC one. It's interesting to know though that I can change it.
So what next?
Oh hang on I will post my stats
OK Guys,
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.21331147A1.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.20.206.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dcdaa6e0
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.028s
eskimosound said:
But if the original isn't flashing what hope have I got with an HTC one. It's interesting to know though that I can change it.
So what next?
Oh hang on I will post my stats
Click to expand...
Click to collapse
Flashing an OTA manually is a different kettle of fish, its just an OTA not a full RUU, and you would still have to be full stock in order for it to succeed.
however, if you just require the firmware in order to use a custom LP rom, then just pull the firmware.zip out of the OTA and flash it.
you would then have to put a custom recovery back on your phone, copy a rom to your sdcard, and flash it from within TWRP recovery.
And im trying to flash O2 OTA
for here
http://forum.xda-developers.com/showthread.php?t=2701376
eskimosound said:
OK Guys,
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.21331147A1.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.20.206.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dcdaa6e0
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.028s
Click to expand...
Click to collapse
you already have the latest firmware on your phone !!!
I installed ARHD 41.( Sense7) no images in Blinkfeed? ------ pulled from your first post, this is a common problem, if you mean its face ache, there is a fix for it on playstore.
OK is tere an RUU for O2 uk?
So im extracting the firmware at the mo, then I will flash it then I will try and install ARHD 41....
Im right that the O2___002 is an upgraded version of the 001 and its what I need right?
Otherwise im just replacing like for like.
eskimosound said:
OK is tere an RUU for O2 uk?
So im extracting the firmware at the mo, then I will flash it then I will try and install ARHD 41....
Im right that the O2___002 is an upgraded version of the 001 and its what I need right?
Otherwise im just replacing like for like.
Click to expand...
Click to collapse
nope O2___002 is a different cid, you need to use the 001 files, however, its the same as you already have on your phone.
CID is just carrier ID, so O2___001 will be something like O2 UK and 002 might be something like O2 france, no difference in files, just different regions.
Seanie280672 said:
nope O2___002 is a different cid, you need to use the 001 files, however, its the same as you already have on your phone.
Click to expand...
Click to collapse
So if its the same and ive got a problem its not the firmware right?
Or is it just an update.
I will tell you this is really easy but telling people how to do it is confusing
eskimosound said:
So if its the same and ive got a problem its not the firmware right?
Or is it just an update.
I will tell you this is really easy but telling people how to do it is confusing
Click to expand...
Click to collapse
nope its not your firmware, just checked a cid list, 002 is O2 DE, 001 is O2 UK http://forum.gsmhosting.com/vbb/f485/archive-htc-cid-list-1604812/
Make sure of a couple of things when flashing a custom ROM, check for problems other are having with it, by reading some of the later posts is what I always do, just a few pages, also and this is a must, read the OP's flashing instructions, so many people bypass this step, the most important step is to make sure your using the dev's recommended custom recovery for flashing.
I always full wipe before flashing anything, so in TWRP first factory reset, and then goto wipe - advanced - select everything except your internal storage and SDcard, and then always reboot back into recovery after the wipes before flashing the rom, it will nag you and say you have no OS installed, ignore it and Do Not Intall to SuperSU, the custom rom flash will do that for you.
During the rom installation, again I always select full wipe when given the option, you then know you have a clean slate to build the rom on.
eskimosound said:
So if its the same and ive got a problem its not the firmware right?
Or is it just an update.
I will tell you this is really easy but telling people how to do it is confusing
Click to expand...
Click to collapse
Your firmware is already current, and should work with latest ARHD. Blinkfeed not showing image is a known issue reported by others.
No need to mess with RUUs or firmware zips.

Categories

Resources