Related
Does any one else's a100 become super laggy after a few minutes of being on.. I am running the latest flex reaper I even overclock it all the way but I get this huge lag after the first few minutes of being on.. anyone else experience this or have a fix for this?
Crimson Ghoul said:
Does any one else's a100 become super laggy after a few minutes of being on.. I am running the latest flex reaper I even overclock it all the way but I get this huge lag after the first few minutes of being on.. anyone else experience this or have a fix for this?
Click to expand...
Click to collapse
I do not experience this issue. When you flashed the rom, did you do a clean install? Have you formatting the device?
Yup.. I format everything.. I use the touch recovery and just use every option that it provides and wipe everything.. It even does it when there is nothing installed. I usually delete almost all the useless system apps that I don't use like the google music app and all of the ones civato provides... I even change the animation settings to .5 in the developer section.. should I turn them off all together?
Crimson Ghoul said:
Yup.. I format everything.. I use the touch recovery and just use every option that it provides and wipe everything.. It even does it when there is nothing installed. I usually delete almost all the useless system apps that I don't use like the google music app and all of the ones civato provides... I even change the animation settings to .5 in the developer section.. should I turn them off all together?
Click to expand...
Click to collapse
The animations should not have anything to do with it. Does this only occur on that rom? Have you tried other roms and experienced that issue?
not many other roms out there.. I have used stock and his.. had the same issue on both.. Also happens on my brother's a500.. it usually happens when unlocking and going into any app.. it sits there for a few seconds and then opens whatever it is i opened
Crimson Ghoul said:
not many other roms out there.. I have used stock and his.. had the same issue on both.. Also happens on my brother's a500.. it usually happens when unlocking and going into any app.. it sits there for a few seconds and then opens whatever it is i opened
Click to expand...
Click to collapse
This is starting to sound like a hardware issue. Before that is concluded, you could:
- Make sure the governor is not set to "conservative"
- Try a clean install of CM9
If the problem still arises, its most likely a hardware issue.
I'm using the OC kernel and have it to 1500.. I also always leave it on performance.. I figure it would kill my battery life but I don't use it much.. and i tried cm9 also.. too many issues as of right now
Crimson Ghoul said:
I'm using the OC kernel and have it to 1500.. I also always leave it on performance.. I figure it would kill my battery life but I don't use it much.. and i tried cm9 also.. too many issues as of right now
Click to expand...
Click to collapse
It doesn't seem it can be anything else but a hardware issue in that case.
NB. Overclocking to a high frequency can cause instability and bring about that issue (but since you experienced it on the stock rom, its quite likely not to be that).
the overclocking helps to speed it up a tad bit.. for the most part it just lags.. i did a clean install just now
Thought I would jump in. Stock ics would slow down and lag on me, jittery transitions poor performance in games or movies, but it took an hour not a few minutes. However testing the T20 kernel before the release kernel had that exact issue, bogging and lagging within minutes.
His release kernel doesnt do it, and flex extreme as well as my cm9 builds don't, even with T20 kernel. Consider flashing that kernel to see what happens.
Side note...what issues did you have with cm9? And what release? My build 1 has been running for 3 days no reboots stable as can be undervolted and OC when needed. Something to maybe think to try to see if it persists. T20 kernel works fine with it too.
Tapatalked from my Galaxy S II.
Crimson Ghoul said:
Does any one else's a100 become super laggy after a few minutes of being on.. I am running the latest flex reaper I even overclock it all the way but I get this huge lag after the first few minutes of being on.. anyone else experience this or have a fix for this?
Click to expand...
Click to collapse
Yup, EVERYTIME I turned on my screen then unlocked it to laggggggg for a lil while. I'm now using CM9 n that issues gone. Try CM9
forum.xda-developers.com/showthread.php?t=1705554
A100 Running CM9 Nightly ROM n ezT20 OC Kernel :-D
To prevent the lagg after unlock, I set the governor to ondemand and the minimum frequency to 312.
eww245 said:
To prevent the lagg after unlock, I set the governor to ondemand and the minimum frequency to 312.
Click to expand...
Click to collapse
That reminds me...setting a screen off profile with the same min/Max speed can cause issues with that, give Max a notch or two higher. And don't have it change the governor leave it the same. So like interactive screen on Myst nit be conservative screen off, doesn't work that way.
Tapatalked from my Galaxy S II.
I had the same issue on stock. I noticed there are 2 weather applications installed (version 1 and version 2) immediately after I disabled the old weather application (version 1) this stopped happening. I used the ICS GUI to do the disable.
This might not be the case in custom rom, but is true for stock. Post reply and let me know if this fixed it for you also.
Crimson Ghoul said:
Does any one else's a100 become super laggy after a few minutes of being on.. I am running the latest flex reaper I even overclock it all the way but I get this huge lag after the first few minutes of being on.. anyone else experience this or have a fix for this?
Click to expand...
Click to collapse
Do you have a micro SD card plugged in? Try reformatting the card with a computer. Worked for me.
Sent from my A100 using XDA
I felt the need to add my two cents in this....this has been happening to me for the longest with the flex reaper rom ONLY. I've used stock and ZN's rom and those did not lag after unlock...only flex reaper. I'm currently using flex reaper and still experience it from time to time but doesn't destroy my day at all...
Give the CM9 nightly ROM's a go. No Bluetooth n no HDMI audio, but everything else is fine n damn smooth. Those issues will be fixed though
A100 Running CM9 Nightly ROM n ezT20 OC Kernel :-D
eww245 said:
To prevent the lagg after unlock, I set the governor to ondemand and the minimum frequency to 312.
Click to expand...
Click to collapse
I installed Flex 100 Reaper with stock and it it seemed to run smooth enough. Then I installed the OC kernal, and started to get lag. I was looking around to find the OC settings, but can't see it anywhere in settings..
Can anyone direct me to where can I adjust the governor/max/min CPU settings?
Sorry for the noob question.
htc_softbank said:
I installed Flex 100 Reaper with the OC kernal, and started to get lag. I was looking around to find the OC settings, but can't see it anywhere in settings..
Can anyone direct me to where can I adjust the governor/max/min CPU settings?
Sorry for the noob question.
Click to expand...
Click to collapse
Setcpu from the play store.
The overclock settings are not integrated like CM.
Hi guys,
I'm a bit of a noob so please bear with me. I recently rooted my phone (SGH-I747M Telus), I have CWM recovery installed. I was interested in overclocking so I installed this kernel on my stock rooted rom (I installed the "sammy" one). I also cleared the delvik cache, cache, and fixed permissions before rebooting. Now I'm having a weird problem with video playback. I get these bleep like sounds, like you might hear on a spaceship, lol. The normal audio plays in addition to these sounds. Yet, regular audio plays fine (mp3s), same with youtube. So, my question is, why? Is there any way of fixing this? I'd rather not play around the stock ROM. I made a backup before doing anything and recently tried to restore the boot, but I got an invalid md5 check.
-JC
Okay, I was able to fix my problem by flashing the stock at&t kernel... but I would still like to be able to overclock... is there another kernel that I can try or a way to fix the problem with the kernel I already tried? Thanks.
If you still want to try previous kernel your problem might be because of heavy undervolting , kernel creator posted this voltage chart.
You can experiment by increasing voltage and see if that helps.
Or you can just try this faux kernel , its pretty good also, we don't have many kernel choices for Samsung based roms at this early development cycle.
ghost77 said:
If you still want to try previous kernel your problem might be because of heavy undervolting , kernel creator posted this voltage chart.
You can experiment by increasing voltage and see if that helps.
Or you can just try this faux kernel , its pretty good also, we don't have many kernel choices for Samsung based roms at this early development cycle.
Click to expand...
Click to collapse
Thanks for the reply... but I was able to fix the problem. It was something wrong with the settings of SetCPU which I installed earlier. I changed it from on demand to performance and now all is well. Now I have a question about battery life. Will overclocking drain battery a lot faster? I imagine it would only make a difference if I was doing CPU intensive things.
JustChillin1414 said:
Thanks for the reply... but I was able to fix the problem. It was something wrong with the settings of SetCPU which I installed earlier. I changed it from on demand to performance and now all is well. Now I have a question about battery life. Will overclocking drain battery a lot faster? I imagine it would only make a difference if I was doing CPU intensive things.
Click to expand...
Click to collapse
Well.. performance setting makes it so that your CPU runs 100% all the time. I don't think that will be battery friendly . Overclock generally uses more power and battery longevity will depend on your usage.
You can try messing with setcpu settings. Try Conservative, then limit minimum speed to 384 and max to your preference. Try your movie again.
Current kernels and setcpu are a bit quirky.
I had the same issues on ktoonsez Sammy. Ended up back at stock AT&T. I've heard it's an issue with many of the kernels but a fix is on the way. Couldn't find a way to get rid of it, but that's not to say it can't be done. Don't have much time to tinker right now.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Its a known issue on ktoonsez kernel. Flash faux's kernel, it has the same features (as well as GPU OC) and doesn't have the audio issue.
I'm running Albinoman's JB RC3 ROM, and like it a lot. The only significant problem I have is occasional severe sluggishness. When it happens, I'll open IntelliControl and I notice either of two things going on:
1) I'll see that the max CPU speed has been reset to 664000 or something close to that (it's always the same number, but I don't remember exactly what it is...600-something). Once I crank the max limit back up to 1036800, things are good again. What keeps resetting the CPU limit to such a low level, and how do I stop it from doing that???
2) I'll see that the CPU is maxed out at 1036800, but I can't figure out what's chewing up the CPU. What tool can I use to see what process is consuming all the CPU cycles when that happens?
Thanks for the help...
1. I can't tell you why it happens... but I know it is a common problem on the JB ROMs (on the Dinc). There was quite a lot of discussion about it. I know the devs are aware of the issue and were working on it.
2. I don't know of anything that will graph percentage of cpu cycles, or anything exactly like that. But try hooking the phone up to the PC and run ddms (part of the adb tool set) and see what it is doing (or failing to do). While ddms is running in verbose mode it will give you a running output of everything the phone is doing (along with all the errors and warnings).
MysticCobra said:
I'm running Albinoman's JB RC3 ROM, and like it a lot. The only significant problem I have is occasional severe sluggishness. When it happens, I'll open IntelliControl and I notice either of two things going on:
1) I'll see that the max CPU speed has been reset to 664000 or something close to that (it's always the same number, but I don't remember exactly what it is...600-something). Once I crank the max limit back up to 1036800, things are good again. What keeps resetting the CPU limit to such a low level, and how do I stop it from doing that???
Click to expand...
Click to collapse
That's because he's using an older version of Evervolv's qsd8k-common. It was fixed on Oct 10 with Change I3a0fff83: powerHAL: fix the screen off bug. This is one of the reasons I do nightlys, is to get all the new tweaks. This bug won't be fixed in his ROM till he resyncs his source and recompiles. It's triggered by the screen turning off. There's a workaround with Tasker, but since this bug is no longer in my ROM, I quit looking at it.
MysticCobra said:
2) I'll see that the CPU is maxed out at 1036800, but I can't figure out what's chewing up the CPU. What tool can I use to see what process is consuming all the CPU cycles when that happens?
Click to expand...
Click to collapse
CPUSpy is a pretty good app.
MysticCobra said:
I'm running Albinoman's JB RC3 ROM, and like it a lot. The only significant problem I have is occasional severe sluggishness. When it happens, I'll open IntelliControl and I notice either of two things going on:
1) I'll see that the max CPU speed has been reset to 664000 or something close to that (it's always the same number, but I don't remember exactly what it is...600-something). Once I crank the max limit back up to 1036800, things are good again. What keeps resetting the CPU limit to such a low level, and how do I stop it from doing that???
2) I'll see that the CPU is maxed out at 1036800, but I can't figure out what's chewing up the CPU. What tool can I use to see what process is consuming all the CPU cycles when that happens?
Thanks for the help...
Click to expand...
Click to collapse
For #1, a possible fix could be to use this power.qsd8k.so provided by tiny4579:
http://forum.xda-developers.com/showpost.php?p=32552961&postcount=264
Replacing this file fixed the issue on Pons's ROM, but it may wreak havoc on Albinoman's, I have no way to know. Make sure you have a good nandroid backup before attempting to use it. Or, just wait for Albinoman to release a newer ROM with the problem fixed in the source.
musical_chairs said:
For #1, a possible fix could be to use this power.qsd8k.so provided by tiny4579:
http://forum.xda-developers.com/showpost.php?p=32552961&postcount=264
Replacing this file fixed the issue on Pons's ROM, but it may wreak havoc on Albinoman's, I have no way to know. Make sure you have a good nandroid backup before attempting to use it. Or, just wait for Albinoman to release a newer ROM with the problem fixed in the source.
Click to expand...
Click to collapse
It should work fine on Albinoman's ROM. powerHAL is a generic jellybean feature and should work on all JB ROM's. You won't need the fix however on either of Pon's ROMs whether AOKP or CM10.
I'm finding the same issue on the 11/08 build. I replaced the file with the one you uploaded, yet no change. Still reverts to 614 when the screen is off.
I'm managing it with both Incredicontrol and Juicedefender, so on wake it returns to 1075, and the SAv2 seems much smoother than interactive for me. If there's a fix in the newer builds I may flash one (if I get the time), but for now I'm really impressed by how well this one is running.
Thanks,
...sorry...I was on the phone...
omniatic said:
I'm finding the same issue on the 11/08 build. I replaced the file with the one you uploaded, yet no change. Still reverts to 614 when the screen is off.
I'm managing it with both Incredicontrol and Juicedefender, so on wake it returns to 1075, and the SAv2 seems much smoother than interactive for me. If there's a fix in the newer builds I may flash one (if I get the time), but for now I'm really impressed by how well this one is running.
Thanks,
...sorry...I was on the phone...
Click to expand...
Click to collapse
It's supposed to change to 614 on screen off. The bug was that it would stick at 614 even on screen on.
I don't recommend that lib for cm. It's outdated.
Also I don't use sav2 anymore as it doesn't and won't implement project butter. Also interactive can be more aggressive than sav2 as it can jump frequency on touch via boostpulse which sav2 doesn't have.
Sent from my Galaxy Nexus using Tapatalk 2
Oh, well, then I guess I'll give the interactive another try. Maybe just needs to settle in longer. Got so used to ICS, wasn't sure what to expect from JB. Guess it's time I read back a few pages and see what else I've missed.
...sorry...I was on the phone...
Thanks, guys--appreciate the help!
Maybe its out of topic but since i still cant post on dev sub forum i wanna ask a question here to pons.
Im running your CM10 20121114, whenever i play music with appolo it always reboot my dinc.
Is any other had this problem too?
alph0 said:
Maybe its out of topic but since i still cant post on dev sub forum i wanna ask a question here to pons.
Im running your CM10 20121114, whenever i play music with appolo it always reboot my dinc.
Is any other had this problem too?
Click to expand...
Click to collapse
Yep, just a tad bit off topic.
I haven't had this problem before. Granted, I've never played music off my Inc, but I haven't heard anyone else complain, either. Can you PM a logcat? And it's always preferable to report errors off latest versions (currently 1120).
PonsAsinorem said:
Yep, just a tad bit off topic.
I haven't had this problem before. Granted, I've never played music off my Inc, but I haven't heard anyone else complain, either. Can you PM a logcat? And it's always preferable to report errors off latest versions (currently 1120).
Click to expand...
Click to collapse
Thanks for the reply Pons. Yes i think i will download the latest build sooner and test it again. Hope it (randon reboot with apollo) will not happen again on my dinc. But if it still, i will pm you the logcat.
alph0 said:
Thanks for the reply Pons. Yes i think i will download the latest build sooner and test it again. Hope it (randon reboot with apollo) will not happen again on my dinc. But if it still, i will pm you the logcat.
Click to expand...
Click to collapse
I use Apollo Music regularly on Pons's CM10, it works fine, doesn't reboot.
alph0 said:
Maybe its out of topic but since i still cant post on dev sub forum i wanna ask a question here to pons.
Im running your CM10 20121114, whenever i play music with appolo it always reboot my dinc.
Is any other had this problem too?
Click to expand...
Click to collapse
Try flashing to his newest build. It fixed a few problems for me and is incredibly fast. I had to reflash gapps from goo.im though because play store was force closing. Also, doubletwist is a better music player imo because it has a better interface and has good integration with the lockscreen.
since yesterday I have a lot problems with my the CPU on my SGS4 + PA. My CPU is on 100% every second and I can't do anything. Do somebody have this problem too? I have this CFW http://forum.xda-developers.com/showthread.php?t=2314523
daerias said:
since yesterday I have a lot problems with my the CPU on my SGS4 + PA. My CPU is on 100% every second and I can't do anything. Do somebody have this problem too? I have this CFW http://forum.xda-developers.com/showthread.php?t=2314523
Click to expand...
Click to collapse
Was this after a recent update? If so, go back to an earlier version. It could just be a glitch with a nightly if you're doing that. If you haven't been updating recently then.....
Check the kernel governor. See if it's set to peformance or lagfree or something like that.
If that isn't it, check battery stats to see what is consuming the most power. Use a 3rd party app like Better Battery Stats instead of the one that comes with Android. See if something is always on. You could have a wakelock that's killing you. If you do, ditch that app and see if it improves.
If that doesn't help, reinstall the rom. Dirty flash over the one you have. See if that fixes it.
If that fails, do a clean install of the rom and add your apps back 1 by 1 until the problem is triggered. Then you'l lknow what's causing it.
Problem solved, it was my SD-Card 16GB. Without SD it is all OK again
No SD card support with paranoid Rom?
Pp.
sent from my P5113 using TouchPal mind control keyboard. (Beta)
Hi all. I have a Samsung Galaxy S3 (I-747) running the latest d2lte nightly build of CM11. What brings me here today is very bad battery problems. These have burdend me since I got the phone (before I installed CM11.) I would like to know what could pottentally be causing the problem. I have tried many things to fix such as turning off all not needed features, greenify certain apps, enabling android runtime(ART), going to privacy advisior and turning off all keep awake settings for my apps, and turning off sync settings. Here is a 50 minute test showing you all the battery drain(to me) of my phone with little to moderate usage. All help is appciated thanks!
Try turning off wifi, sync, NFC, Bluetooth, data, and any other toggle when not in use. Also greenify any app you can. Finally turn your screen brightness to the lowest possible setting without hindering your view.
If none of that helps, I would try another battery with more mAh.
StoneyJSG said:
Try turning off wifi, sync, NFC, Bluetooth, data, and any other toggle when not in use. Also greenify any app you can. Finally turn your screen brightness to the lowest possible setting without hindering your view.
If none of that helps, I would try another battery with more mAh.
Click to expand...
Click to collapse
Thanks for the feedback but as stated in the original post, all of these have been turned off and greenify has also been used. Neither helped nor solved the problem. As for a bigger battery I prefer to keep my phone slim but will consider it.
You could always try another 2600 mAh battery and see if it helps. You might also want to try a data wipe reset or restore a previous Nandroid backup....just a suggestion.
StoneyJSG said:
You could always try another 2600 mAh battery and see if it helps. You might also want to try a data wipe reset or restore a previous Nandroid backup....just a suggestion.
Click to expand...
Click to collapse
May try that too, wanna confirm its the battery before I try though as its a waste of $ if its not. I looked at the hidden menu(dail *#*#4636#*#*) battery usage settings and it says my battery is in good health. Leading me to believe it maybe my phone has faulty hardware but gonna try peoples suggestions before I say that's the cause too.
KentuckyGuy447 said:
Thanks for the feedback but as stated in the original post, all of these have been turned off and greenify has also been used. Neither helped nor solved the problem. As for a bigger battery I prefer to keep my phone slim but will consider it.
Click to expand...
Click to collapse
maybe a custom kernel. or read up (if needed) on kernel tweaking. my favorite was always quantum and ktoonsez kernel. just make sure thats its made for your device and android version.
http://forum.xda-developers.com/showthread.php?t=2390147
http://forum.xda-developers.com/showthread.php?t=1756776
"all i can really do , is stay out of my own way and let the will of heaven be done"
Install No Frills CPU from the app store and set the min to 300 and max to 4.3. For the governor, I like ondemand and noop.
audit13 said:
Install No Frills CPU from the app store and set the min to 300 and max to 4.3. For the governor, I like ondemand and noop.
Click to expand...
Click to collapse
that dang @audit13 busting out with some custom tweaking.
:good::thumbup:
"all i can really do , is stay out of my own way and let the will of heaven be done"
audit13 said:
Install No Frills CPU from the app store and set the min to 300 and max to 4.3. For the governor, I like ondemand and noop.
Click to expand...
Click to collapse
Isn't ondemand the worst? (Besides performance) and won't a CPU tuner app conflict with CM's built in one? Just making sure.
EDIT: I seen its compatible, will revert to default CPU settings on CM and try this app.
mrrocketdog said:
maybe a custom kernel. or read up (if needed) on kernel tweaking. my favorite was always quantum and ktoonsez kernel. just make sure thats its made for your device and android version.
http://forum.xda-developers.com/showthread.php?t=2390147
http://forum.xda-developers.com/showthread.php?t=1756776
"all i can really do , is stay out of my own way and let the will of heaven be done"
Click to expand...
Click to collapse
Will look into but this is a off question. (Again I'm a noob lol) will a different kernel conflict with CM?
KentuckyGuy447 said:
Will look into but this is a off question. (Again I'm a noob lol) will a different kernel conflict with CM?
Click to expand...
Click to collapse
should be o.k. i've done it many times. but then again , i would go with @audit13's suggestion first. no flashing worries ! again , just my two cents.
"all i can really do , is stay out of my own way and let the will of heaven be done"
I used ondemand on a Nexus4, Moto G, , HTC One XL, and Note 3. In sleep mode, the phones, on average, drop about 1% every 2 hours. Once you start using the phone to surf, talk, etc., the battery start to drop but it's a lot better than stock settings.
The kernel you use can also have an impact on battery performance.
There should be no problem with using another cpu app with a CM ROM. I have done this on my Motorola Atrix and Moto G running a CM-based ROM.
Thanks again guys! Will try, test and report back in a day or two.
Installed Quantum Kernel and now Android System is power hungry. It is also still draining ridiculously fast, same as before. (Didn't fully charge my phone so don't be alarmed about battery percentage.)
KentuckyGuy447 said:
Alright I got a question, I'm gonna gonna flash Quantum Kernel 4.4.4 final alongside my CM11 ROM but I am using Android Runtime Instead of dalvik. Will this in anyway cause any problems?
Click to expand...
Click to collapse
best to check in quantum thread to see if is ART capable. i cant remember offhand if is or not.
"all i can really do , is stay out of my own way and let the will of heaven be done"
Look up Better Battery Stats. You can get it from the play store, but I think you can find a free version posted to xda forums if you look around. It keeps track of wakelocks and system states better than the built in battery monitor.
It will let you see if you have a rogue app or service keeping your phone from getting to deep sleep when not in use.
jason2678 said:
Look up Better Battery Stats. You can get it from the play store, but I think you can find a free version posted to xda forums if you look around. It keeps track of wakelocks and system states better than the built in battery monitor.
It will let you see if you have a rogue app or service keeping your phone from getting to deep sleep when not in use.
Click to expand...
Click to collapse
+1.
if want.
https://www.dropbox.com/sh/80e67e4o295sle6/AAAh1SYcl0mJkpK7_yXIpodja?dl=0
"all i can really do , is stay out of my own way and let the will of heaven be done"
Alright I've got myself in a minor pickle. I am currently testing Quantum Kernel and will let you guys know the results. The problem is my SMS has stopped working as in I can't send any texts. Idk if its were I played around in the Testing Menu or if its the kernel. What do you guys think?
KentuckyGuy447 said:
Alright I've got myself in a minor pickle. I am currently testing Quantum Kernel and will let you guys know the results. The problem is my SMS has stopped working as in I can't send any texts. Idk if its were I played around in the Testing Menu or if its the kernel. What do you guys think?
Click to expand...
Click to collapse
personally never had an issue with texts running quantum kernel , but
perhaps clearing data/cache in sms would help.(?).
"all i can really do , is stay out of my own way and let the will of heaven be done"
mrrocketdog said:
personally never had an issue with texts running quantum kernel , but
perhaps clearing data/cache in sms would help.(?).
"all i can really do , is stay out of my own way and let the will of heaven be done"
Click to expand...
Click to collapse
Sadly it didn't work :'(