Develop Bugs

mssmison did it!: CyanogenMod 5.07 test 3. for kaiser!

wifi working with patch.
http://forum.xda-developers.com/attachment.php?attachmentid=325161&d=1273647492
http://forum.xda-developers.com/showthread.php?t=679680

could someone resize it to 240x320 please? cant wait to try this

Heads up! New Kaiser Wifi update: http://forum.xda-developers.com/showpost.php?p=6456191&postcount=33
Old one replaced build.prop with wrong version. Reinstall and use the new Wifi update.
Also to get rid of android-rebooting-problems with GPS Test application do the following:
1. Start terminal emulator
2. su
3. cd system/lib/hw
4. rwsystem
5. rm sensors.msm7k.so
6. rosystem
7. exit
8. exit
9. restart phone

So how is it? I'm too lazy to install it.

Dukenukemx said:
So how is it? I'm too lazy to install it.
Click to expand...
Click to collapse
Seems like a really nice build. I'm using 320x428 with 144 dpi. A bit slow because I'm currently not running in NAND but I would expect it to perform quite well once I go back to running NAND again.
I haven't tested it very much yet as I'm doing some experiments in WinMO at the moment.

just tried
hey
i just downloaded this and i have to say im impressed about this.
as i love the eclair design and everything and the donut speed i have to say this is impressing because it is FAST! not as fast as donut but pretty much the same. that could be due to the 500 mHz OC but i just like that build.
just needs to be optimized a bit, maybe a few apps like astro and others
and as the developer has a new phone we need a new one.
But i have to say its awesome!
i love it already and just tried it for 9 min.
just the OC needs to be removed i noticed right now and is there any way to set another value for the screen sensebility because quiet often it does not react on a touch.
so keep updating this!
nick

nice rom but it chews through battery like crazy. With a full charge battery will drop from 99 to 75(battery fix removed OC and set 1400 value) with just a 10min phone call and a couple txts. I think what we need is a new kernel highly optimized for battery life using the latest patches. Judging from the name alone of the kernel its running right now 2.6.25-01051-gc362ac-dirty and the fact that 2.6.25 was released in jul 2008 i think theres room for tons for improvement.
Does anyone know how to adjust the microphone gain? my friends complain they cant hear me..

The wifi scan interval is set to 15 seconds by default in this release. That will have a negative effect on battery life if you are out of range of a known network and have wifi enabled. I'll put together an update to change this when time allows. I use 120 seconds myself.

kallt_kaffe said:
The wifi scan interval is set to 15 seconds by default in this release. That will have a negative effect on battery life if you are out of range of a known network and have wifi enabled. I'll put together an update to change this when time allows. I use 120 seconds myself.
Click to expand...
Click to collapse
Thanks to update.
It working good on Polaris.
Also i change interval to 180 and density to 120 in .prop

Here's an update that changes the wifi scan delay to 120 seconds and also (not tested yet) changes the model name from Vogue to Kaiser.

i'm still trying to figure out if it's possible, somehow, to flash an update.zip file (to be able to use the cyanogenmod skins) with the nomorootfs we're using, instead of converting the skins to metamorph format
does anyone know if it's possible or how to do it?

Can't get wifi to work with updates, which one should I need?

kallt_kaffe's works for me. If something isn't working like it should, power off the phone and remove the battery. Then hold down the power button to remove any remaining power left. Place batter back in and try again.
Also, make sure to always fix permissions when you apply updates, even for wifi.

Dukenukemx said:
kallt_kaffe's works for me. If something isn't working like it should, power off the phone and remove the battery. Then hold down the power button to remove any remaining power left. Place batter back in and try again.
Also, make sure to always fix permissions when you apply updates, even for wifi.
Click to expand...
Click to collapse
edit: how stupid can I be? I've bought another phone and forgot to add the mac adress.

Certainly think mod needs work. So far the battery meter is off, and all this time I thought it drained less power. A lot of pop ups to force close apps. A lot of apps are running that I don't use.
mssmison didn't say he was going to put any more effort into it either. Hopefully, someone will pick it up.

Dukenukemx said:
Certainly think mod needs work. So far the battery meter is off, and all this time I thought it drained less power.
Click to expand...
Click to collapse
Try deleting /data/system/batterystats.bin. That usually helps when the batterymeter has gone bad.
A lot of pop ups to force close apps. A lot of apps are running that I don't use.
Click to expand...
Click to collapse
Have you removed or renamed /lib/modules/hw/sensors.msm7k.so? After I removed that it runs very stable for me.

kallt_kaffe how do you do it?
I'm new to the androidinstall.tar method. I'm tyring to run from haret but it seems impossible.
You said you where experimenting with something in winmo, so that implies you're using haret? Are you running from haret?
When I try, Polymod, and Mssmission they don't show an install option, when I try myn and incubus I get it installed but I get no sound. It was actually your gps kernel that let me get things installed all other kernels i tried had non-functional dpads within the installer environment. Also, trying another kernel once installed didn't fix the sound issue.
Anyhow just let me know if you're using Haret. I wonder whats up with the sound and missing install option. I tried the install two different ways one with a 2gb fat32 partition, and then another attempt using three primary partitions 1.3gb fat32, 300mb ext, 300mb ext. All installers then would give me options beside's fat, but not all intallers would have an install option.. I'm using radio 1.71.09.01.eMo, model: kais100, os: wm6.5 (shifu v.3)

kallt_kaffe said:
Have you removed or renamed /lib/modules/hw/sensors.msm7k.so? After I removed that it runs very stable for me.
Click to expand...
Click to collapse
I try start Skyforce game, but it forceclose.
It can work after i added "sensors.sapphire.so" into /lib/modules/hw/

I've installed the cyanogenMod updater from the marketplace, but it can only find older versions, no experimental versions, whatever option I set in the program.Anyone?

Dukenukemx said:
Certainly think mod needs work. So far the battery meter is off, and all this time I thought it drained less power. A lot of pop ups to force close apps. A lot of apps are running that I don't use.
Click to expand...
Click to collapse
battery life has been fantastic for me on this build...
although I reverted back to 400mhz and got rid of compcache.
I am sure that OCing to 500 by default is draining the battery faster.
I would rather a usable phone than a fast one...(although it still seems very fast to me)

[Help] Lots of freezes and crushes after updating to 4.0.5

Hi,
I've had my Archos G9 80 updated to the latest android official 4.0.5 from and since then i'm expriencing lots of crushes and freezes. I'm getting them randomly with no specific app working.
Also, i have tried to do full formats (Android + Data), and still having same issues.
Does anyone have any idea what else i can try?
Thanks.

I had lots of freezes too (not only with the latest firmware). They seem to be gone since I changed the CPU govenor from "hotplug" to "interactive". I'm not sure yet that it was the reason, but try it and let us know if it helps.

DeeDroid said:
I changed the CPU govenor from "hotplug" to "interactive".
Click to expand...
Click to collapse
how this is done? Ι have the same problem!

africa_twin said:
how this is done? Ι have the same problem!
Click to expand...
Click to collapse
Yes, can this be done from the phone itself? Within the ROM?

You can set this in any tool that is intended for overclocking. I don't overclock, I only changed the Govenor.
I use "SetCPU". ("No-frills CPU Control" should do the same.)

So does this have any other effects on the phone?

RichWPX said:
So does this have any other effects on the phone?
Click to expand...
Click to collapse
Nothing too serious. Your CPU is clocked dynamically so it doesn't run full speed when there is nothing to compute(save energy). To my understanding the govenor is basically a policy to manage how quickly the frequency steps up/down on changing CPU load. So "powersave" is supposed to save energy but make the system a little less reactive than "interactive" Governor for example. I think I read somewhere "hotplug" deactivates the second core on low load situations, I suspect for some strange reason my device might have crashed sometimes on trying to wake up the sleeping second core. Well maybe I'm wrong, that's why I'm interested if it helps others.
I didn't notice any change in battery lifetime, mostly it's the display anyway that drains the battery. Everything is running well, battery lifetime is great too and no crash/freeze at all since i changed that setting and it crashed almost every damn day before, no matter if it was Honeycomb or ICS.

I downgraded the device to 4.0.4 and since then, no crushes.. I guess for some reason 4.0.5 isn't stable on my device.. ill stick with this version unroll they get another one out..
To downgrade, just install official update file of the version you want to upgrade to..

DeeDroid said:
Nothing too serious. Your CPU is clocked dynamically so it doesn't run full speed when there is nothing to compute(save energy). To my understanding the govenor is basically a policy to manage how quickly the frequency steps up/down on changing CPU load. So "powersave" is supposed to save energy but make the system a little less reactive than "interactive" Governor for example. I think I read somewhere "hotplug" deactivates the second core on low load situations, I suspect for some strange reason my device might have crashed sometimes on trying to wake up the sleeping second core. Well maybe I'm wrong, that's why I'm interested if it helps others.
I didn't notice any change in battery lifetime, mostly it's the display anyway that drains the battery. Everything is running well, battery lifetime is great too and no crash/freeze at all since i changed that setting and it crashed almost every damn day before, no matter if it was Honeycomb or ICS.
Click to expand...
Click to collapse
Thanks! And I have notices ICS is not as snappy as GB was... I mean GB flew! Swiping the screen, it feels a little off now.

RichWPX said:
Thanks! And I have notices ICS is not as snappy as GB was... I mean GB flew! Swiping the screen, it feels a little off now.
Click to expand...
Click to collapse
GB? Gingerbread? Guess you mean Honeycomb. Anyway, I experienced ICS to be much better.

DeeDroid said:
I had lots of freezes too (not only with the latest firmware). They seem to be gone since I changed the CPU govenor from "hotplug" to "interactive". I'm not sure yet that it was the reason, but try it and let us know if it helps.
Click to expand...
Click to collapse
changing govenor from "hotplug" to "interactive" seems to help against random freezes. 4 days without problems until now i had freezes with ics, but never with honeycomb.
device: archos 101g9
[ROM] Archos ICS - Firmware 4.0.5(4.0.3) - ROOT & BUSYBOX , Only for SDE (thanks surdu_petru)

DeeDroid said:
I had lots of freezes too (not only with the latest firmware). They seem to be gone since I changed the CPU govenor from "hotplug" to "interactive". I'm not sure yet that it was the reason, but try it and let us know if it helps.
Click to expand...
Click to collapse
That seems to be my problem too. Setcpu requires root. is there a very easy way to do this, just to run this setcpu? There used to be a z4 tool, but can't seem to find it anymore.
Edit I see that I need superoneclick. Will temporary root suffice or will I need permanent root to change the governor setting.and keep it so.

Unfortunately all know temp root variants tend to brake things- im Honeycomb sound, in ICS 3d driver.
The only real option is to enable SDE and use custom firmware.
As for freezes- try reinstalling apps. Direct upgrade from Honeycomb does not work for all
tapatalked from Xperia Arc S

DeeDroid said:
GB? Gingerbread? Guess you mean Honeycomb. Anyway, I experienced ICS to be much better.
Click to expand...
Click to collapse
I have the same experience. Hc was laggy and slow. Ics is much faster and smoother.
Sent from my ARCHOS 80G9 using Tapatalk

gen_scheisskopf said:
Unfortunately all know temp root variants tend to brake things- im Honeycomb sound, in ICS 3d driver.
The only real option is to enable SDE and use custom firmware.
As for freezes- try reinstalling apps. Direct upgrade from Honeycomb does not work for all
tapatalked from Xperia Arc S
Click to expand...
Click to collapse
sorry for the n00b question, but SDE stands for ??? S ? Develeper Edition ?
Will "Superoneclick" not root my device ?

sbtwister said:
sorry for the n00b question, but SDE stands for ??? S ? Develeper Edition ?
Click to expand...
Click to collapse
Special Developer Edition
sbtwister said:
Will "Superoneclick" not root my device ?
Click to expand...
Click to collapse
No, it won't. Gen9 system layout is different than for most other devices

hey, back to topic
5 days without freeze with govenor "interactive". i witched back to "hot plug" this morning and had to reboot my tablet 2 times today. for my case, "interactice" seems to help against random freezes.

mines performance intstead of interactive... experienced some freezing n interactive..

Man I'm really pissed.
Yesterday I had to hard reboot 7 times
Sent from my X8 using xda premium

hmm,
sounds not good. archos stands not for high quality i guess. we get what we pay . i had an archos 101g8, now a 101g9 and trouble with hard-/firmwares since 2010. i think, this was the last one - no furthermore advantures
@IrishStuff09: you did reformat for ics or upgrade from honeycomb? the best way is to start from scratch and skip upgrades.

[ROM][ICS 4.0.3] [27.05.2012] HeroICS v3

Hello,
I'm reactivating this thread since I cannot talk with samm every now and then to update the OP from this thread here.
What works:
It is stable for a daily driver but there are definitely things that doesn't work. For starters, the Hero is too small for ICS since we don't have any GPU posibility. Adreno 130 drivers are oh, too small and too bad for animations on ICS, they suck even in GB and Froyo. Still, the statusbar and fling are much smoother than other android releases because that's how ICS is built. It is more RAM friendly and it looks, well, sexy!
Will try and update this rom when it will be possible. We might jump on the bandwagon of 4.0.4 if I can make it to move faster than it moves right now (yes, I have an experimental build).
If one of you want to join me to develop this rom further, send a PM and I will send you some details about what is in the works, how far it is. I know there are few people that can work on builds here on Hero thread but if we work together, we can pull this out one more time.
FLASH THIS AT YOUR OWN RISK. I AM NOT RESPONSIBLE FOR:
- YOUR BRAIN
- YOUR HOUSE
- YOUR PHONE!
ON with the ROM. What has been changed:
Added:
Code:
- Google Music apk (yes, official google music app);
- Explorer.apk
- Latest and greatest LV Kernel 1.2+
- Revert to Evtoolbox back from 4.0.3 builds
- Set the cpu to scale at 352-672 from startup
- Tweaked the build.prop a little (added some experimental lines)
Why this is v3?
Because the memory management inside the kernel (remember, INSIDE THE KERNEL) is tweaked and fixed to nice values in order to allow our hero to better multitasking (you can find these values in my other rom called 1ceCream BEAST Flavor). No need for tweaks in init.d to do the job, no bull****.
Just plain and simple!
If you are texting someone, sending an email, playing a game, doing something, and you are locking the screen, after unlocking you will find that the application is ON the screen, and is not closed how it is in many other roms for hero. The multitasking with my values is so much better, you will definitely like it!
Click to expand...
Click to collapse
The rom moves fast, even if it is ICS, I have the animations on and no force GPU in Developer settings and it is still moving so much fast than the older builds.
Overall, I am happy with this release and I hope you will be too! Post me some of your opinion and tell me if it is fast or am I dreaming!
Some user's feedback:
Loxxy said:
wow 'HeroICS v3' is running on rocket power !!! what the hell
amazing job
Click to expand...
Click to collapse
Carrier Internet connection issue:
- Create Manual APN for provider's internet connection.
DOWNLOAD HeroICS v3

If you make these changes maybe you'll see better performance, the hero can't handle dithering on anything higher than stock GB or Sense froyo and doesn't have enough RAM for 48mb of dalvik heapsize. I may be wrong but these always worked for me in the past altough ICS is supposed to be better on RAM.
dalvik.vm.execution-mode=int:fast
dalvik.vm.heapsize changed to 24m or 32mb
persist.sys.use_dithering=0

Good work. Flashing now.
How about keeping this as lite as possible, only the absolute essentials pre-installed, everything else as optional zips / apk. For instance, I personally have no use for the music player.
I would really like to see a bare bones, fast and stable ics rom where you just add what you need.
---------- Post added at 03:56 AM ---------- Previous post was at 03:16 AM ----------
Unexpected reboot just as I was about to install Opera Mini. Followed by: "New Sim Detected, reboot required." Never seen that before.
I've applied CSL00's values.
Wonder if V6 Supercharger or Auto Memory Manager can improve things.
Play Store is noticeably faster. Unsure if was CSL00's values or the introduction of AMM.
Regarding the error message: 'No more room on this home screen.'
In Play Store app. Menu > Settings > Deselect Auto-add widgets.
Second unexpected reboot, otherwise things are getting faster. No wifi issues, BT still won't pair.
Running AMM on 'Aggressive.'

CSL00 said:
If you make these changes maybe you'll see better performance, the hero can't handle dithering on anything higher than stock GB or Sense froyo and doesn't have enough RAM for 48mb of dalvik heapsize. I may be wrong but these always worked for me in the past altough ICS is supposed to be better on RAM.
dalvik.vm.execution-mode=int:fast
dalvik.vm.heapsize changed to 24m or 32mb
persist.sys.use_dithering=0
Click to expand...
Click to collapse
dalvik execution mode was on fast until I changed it in the last second to "jit".
vm.heapsize was changed to 48 because I was testing 32 mb and I saw that it takes a little while to enter in one application. With 48 mb the time is reduced somehow. Please feel free to change it to 32 mb if you want. Dithering, well here is a mistery, I don't know if this works in ICS. It does look a little better than with it changed to 0 and my phone can suport dithering pretty well.
About the reboots, please install set cpu and set your max cpu frequency to a respectable value such as 691 or lower. I suggest using governor smartassV2.
The whole rom does feel a little snappier but we have an issue when someone calls you and after 20 seconds the call gets interrupted. I'll look into that today after work and see if I can fix it somehow.
I've tried Supercharger, the V8 doesn't wanna start on ICS and when applied V6 with option 6, the phone just got stuck on bootloop.
The reason that I've made it like this with apk.s that you can easly uninstall is that I didn't want you guys to have to flash any other optional zips or anything. But as I said, feel free to do what ever you want and uninstall those unused apps.
Oh, If you want to try supercharger yourself, you have to first delete these scripts from /etc/init.d:
03tweaks
04netspeed
05fixsdcardspeed
06loopy_smoothness_tweak
15cleanup_init_ram
16sqlite_optimize
17speedy_modified
Just to avoid any unexpected issues.
L.E:
CAN SOMEONE PLEASE, make a LOGCAT while you are in a call and save it to a txt? I want to see if we can narrow down the problem of disconnecting. I am unable to make a logcat atm.

1ceb0x, back to using your original build.prop, and Setcpu. Things seem more stable.
I'm looking for a notification toggle (cm-style) that has no icon when running (or only hides it, leaves a space.)
I will make a logcat, but I've tried aLogrec and all it seems to produce is an empty file. Should it not be dumping info on any activity I do?

lost101 said:
1ceb0x, back to using your original build.prop, and Setcpu. Things seem more stable.
I'm looking for a notification toggle (cm-style) that has no icon when running (or only hides it, leaves a space.)
I will make a logcat, but I've tried aLogrec and all it seems to produce is an empty file. Should it not be dumping info on any activity I do?
Click to expand...
Click to collapse
Seems stable than samm000's build.prop?
Glad to hear this.
As for the logcat, you cannot use any of the readers on the market because they will not work on ics. I've tried to make a log using android sdk but it seems that we need a file called 'main' in /dev/logs. I tried to make the file manually but then I've encountered an EOF read error on cmd. I forgot to make permissions for the respective file. Will make it again now and see how it goes.
As for cm notification toggle, I don't know what are you talking about. The notification toggle on ICS is nicer than any other available .
Tell me if you have calls issue (your call is disconnected after some seconds)?

Well it is probably more stable because I reduced the cpu speed.
In a voicecall now, 2mins+. Call lost around 3 mins.
6mins+ this time and still going...

lost101 said:
Well it is probably more stable because I reduced the cpu speed.
In a voicecall now, 2mins+. Call lost around 3 mins.
Click to expand...
Click to collapse
Did you checked the box "Force GPU rendering" in Develop Options?
Is it stable because I've added graphical tweaks and some tweaks to speed...

Yeah, 'Force GPU rendering' is enabled. In a voicecall now, 10mins+.
I ended the call myself at 22mins.

lost101 said:
Yeah, 'Force GPU rendering' is enabled. In a voicecall now, 10mins+
Click to expand...
Click to collapse
10 minutes without disconnecting? What's your settings on network? GSM ONLY, or WCDMA preferred?
(to see this, please go to dialer and dial *#*#4636#*#* , then go to Phone information, scroll down and you will see the value above the button "Turn Off Radio").
as default the version is WCDMA preferred. What Radio firmware are you using?
also, did you installed Habarug's tweak to hide the end button call during a call? (it's in samm000's thread).
this information will be helpful! cheers

WCDMA preferred. Radio: 63.18.55.06PU_6.35.15.11
I have not installed Habarug's tweak.

lost101 said:
WCDMA preferred. Radio: 63.18.55.06PU_6.35.15.11
I have not installed Habarug's tweak.
Click to expand...
Click to collapse
and you had 10 minutes without disconnecting? you were able to end the call normally?

1ceb0x said:
and you had 10 minutes without disconnecting? you were able to end the call normally?
Click to expand...
Click to collapse
It was 22mins when I ended the call myself.
Regarding notification toogle this is what I mean: 15 toggle status bar as implemented in this rom. Check the video.

Very ODD.
I have 63.18.55.06OU_6.35.15.01 on my device with WCDMA preferred but I keep getting call disconnected after 10 seconds or so.... regarding the notification status bar power widget, I don't know what to say. I'm not a dev so...
i'm trying to find a way to make a log cat of the calling issue because I don't really want to change my radio because my version seems to be battery friendly...
thank you for your support

Obviously the notification thing isn't even important right now. I shouldn't really have mentioned it.
I thought this radio was considered one of the best to be using, and find the battery life to be good on it.

Don't know if its the best really. But I've flashed it anyway. Since this will end my calling interrupt, it will be a small price to pay if the battery doesn't play well.
Will test the voice calling. Btw, I am maybe working on RC2, with some new tweaks and fixed latinime.apk keyboard..
can confirm right now that the latinime.apk is fixed.
@Habarug: are you using my mod or sam's rom?

Thanks lost, will try your radio, im on .14 atom

Just to clarify, the radio I am using still has calls dropping with ics. It seems to happen at random times. 1 minute into a call, 3 minutes or not at all. Maybe it's because of the numbers I am ringing. I can't be sure they would not drop anyway. But it sounds like it is doing better than some other radios.
Also, what about having a build based off ics 4.0.4?

lost101 said:
Just to clarify, the radio I am using still has calls dropping with ics. It seems to happen at random times. 1 minute into a call, 3 minutes or not at all. Maybe it's because of the numbers I am ringing. I can't be sure they would not drop anyway. But it sounds like it is doing better than some other radios.
Also, what about having a build based off ics 4.0.4?
Click to expand...
Click to collapse
we have to fix this issues first and then talk about another version. anyhow, 4.0.4 is much laggier than this version. i saw a bit of logcat and some awkwardly errors regarding the "animations" but i was unable to save the log for future use.
I've asked Maclaw, a dev from Galaxy Gio/Fit/Mini who made CM9 possible on those device to look at our build and maybe with some luck he can see something that make this calls drop...
managed to past 3 minutes in call with your radio version lost101. cheers
L.E: I am unable to send PM's. so i cannot ask Maclaw for help.. too bad! I'll just have to post on their op!

Come on people.. test the build!

[Q] Does anyone else's A100 slow down

Does any one else's a100 become super laggy after a few minutes of being on.. I am running the latest flex reaper I even overclock it all the way but I get this huge lag after the first few minutes of being on.. anyone else experience this or have a fix for this?

Crimson Ghoul said:
Does any one else's a100 become super laggy after a few minutes of being on.. I am running the latest flex reaper I even overclock it all the way but I get this huge lag after the first few minutes of being on.. anyone else experience this or have a fix for this?
Click to expand...
Click to collapse
I do not experience this issue. When you flashed the rom, did you do a clean install? Have you formatting the device?

Yup.. I format everything.. I use the touch recovery and just use every option that it provides and wipe everything.. It even does it when there is nothing installed. I usually delete almost all the useless system apps that I don't use like the google music app and all of the ones civato provides... I even change the animation settings to .5 in the developer section.. should I turn them off all together?

Crimson Ghoul said:
Yup.. I format everything.. I use the touch recovery and just use every option that it provides and wipe everything.. It even does it when there is nothing installed. I usually delete almost all the useless system apps that I don't use like the google music app and all of the ones civato provides... I even change the animation settings to .5 in the developer section.. should I turn them off all together?
Click to expand...
Click to collapse
The animations should not have anything to do with it. Does this only occur on that rom? Have you tried other roms and experienced that issue?

not many other roms out there.. I have used stock and his.. had the same issue on both.. Also happens on my brother's a500.. it usually happens when unlocking and going into any app.. it sits there for a few seconds and then opens whatever it is i opened

Crimson Ghoul said:
not many other roms out there.. I have used stock and his.. had the same issue on both.. Also happens on my brother's a500.. it usually happens when unlocking and going into any app.. it sits there for a few seconds and then opens whatever it is i opened
Click to expand...
Click to collapse
This is starting to sound like a hardware issue. Before that is concluded, you could:
- Make sure the governor is not set to "conservative"
- Try a clean install of CM9
If the problem still arises, its most likely a hardware issue.

I'm using the OC kernel and have it to 1500.. I also always leave it on performance.. I figure it would kill my battery life but I don't use it much.. and i tried cm9 also.. too many issues as of right now

Crimson Ghoul said:
I'm using the OC kernel and have it to 1500.. I also always leave it on performance.. I figure it would kill my battery life but I don't use it much.. and i tried cm9 also.. too many issues as of right now
Click to expand...
Click to collapse
It doesn't seem it can be anything else but a hardware issue in that case.
NB. Overclocking to a high frequency can cause instability and bring about that issue (but since you experienced it on the stock rom, its quite likely not to be that).

the overclocking helps to speed it up a tad bit.. for the most part it just lags.. i did a clean install just now

Thought I would jump in. Stock ics would slow down and lag on me, jittery transitions poor performance in games or movies, but it took an hour not a few minutes. However testing the T20 kernel before the release kernel had that exact issue, bogging and lagging within minutes.
His release kernel doesnt do it, and flex extreme as well as my cm9 builds don't, even with T20 kernel. Consider flashing that kernel to see what happens.
Side note...what issues did you have with cm9? And what release? My build 1 has been running for 3 days no reboots stable as can be undervolted and OC when needed. Something to maybe think to try to see if it persists. T20 kernel works fine with it too.
Tapatalked from my Galaxy S II.

Crimson Ghoul said:
Does any one else's a100 become super laggy after a few minutes of being on.. I am running the latest flex reaper I even overclock it all the way but I get this huge lag after the first few minutes of being on.. anyone else experience this or have a fix for this?
Click to expand...
Click to collapse
Yup, EVERYTIME I turned on my screen then unlocked it to laggggggg for a lil while. I'm now using CM9 n that issues gone. Try CM9
forum.xda-developers.com/showthread.php?t=1705554
A100 Running CM9 Nightly ROM n ezT20 OC Kernel :-D

To prevent the lagg after unlock, I set the governor to ondemand and the minimum frequency to 312.

eww245 said:
To prevent the lagg after unlock, I set the governor to ondemand and the minimum frequency to 312.
Click to expand...
Click to collapse
That reminds me...setting a screen off profile with the same min/Max speed can cause issues with that, give Max a notch or two higher. And don't have it change the governor leave it the same. So like interactive screen on Myst nit be conservative screen off, doesn't work that way.
Tapatalked from my Galaxy S II.

I had the same issue on stock. I noticed there are 2 weather applications installed (version 1 and version 2) immediately after I disabled the old weather application (version 1) this stopped happening. I used the ICS GUI to do the disable.
This might not be the case in custom rom, but is true for stock. Post reply and let me know if this fixed it for you also.

Crimson Ghoul said:
Does any one else's a100 become super laggy after a few minutes of being on.. I am running the latest flex reaper I even overclock it all the way but I get this huge lag after the first few minutes of being on.. anyone else experience this or have a fix for this?
Click to expand...
Click to collapse
Do you have a micro SD card plugged in? Try reformatting the card with a computer. Worked for me.
Sent from my A100 using XDA

I felt the need to add my two cents in this....this has been happening to me for the longest with the flex reaper rom ONLY. I've used stock and ZN's rom and those did not lag after unlock...only flex reaper. I'm currently using flex reaper and still experience it from time to time but doesn't destroy my day at all...

Give the CM9 nightly ROM's a go. No Bluetooth n no HDMI audio, but everything else is fine n damn smooth. Those issues will be fixed though
A100 Running CM9 Nightly ROM n ezT20 OC Kernel :-D

eww245 said:
To prevent the lagg after unlock, I set the governor to ondemand and the minimum frequency to 312.
Click to expand...
Click to collapse
I installed Flex 100 Reaper with stock and it it seemed to run smooth enough. Then I installed the OC kernal, and started to get lag. I was looking around to find the OC settings, but can't see it anywhere in settings..
Can anyone direct me to where can I adjust the governor/max/min CPU settings?
Sorry for the noob question.

htc_softbank said:
I installed Flex 100 Reaper with the OC kernal, and started to get lag. I was looking around to find the OC settings, but can't see it anywhere in settings..
Can anyone direct me to where can I adjust the governor/max/min CPU settings?
Sorry for the noob question.
Click to expand...
Click to collapse
Setcpu from the play store.
The overclock settings are not integrated like CM.

[Q] Lollipop, The Aggressive App Killer

Does this even need an explanation? Lollipop kills apps like it's his hobby.
Even with only a few light (on RAM) user apps running in the background you sometimes find yourself staring at your launcher home screen that, you could've sworn, was just showing a different app a second ago.
Or the times when, after multi-tasking a bit, your phone starts becoming painfully slow. Turns out that some apps are so stubborn that they go on strike (continuously restarting) when LP kills them.
I'm sure many have experienced this. And I have seen some devs address this issue here and there. I though it would be useful to gather the info into one thread, to ease our (or my?) frustration on this issue.
What I wanna know is, what causes it exactly (why didn't it happen on KK?), and is there a solution to this? Or at some way to calm LP down a bit with his killing of innocent apps.
Thanks.

Djalaal said:
Does this even need an explanation? Lollipop kills apps like it's his hobby.
Even with only a few light (on RAM) user apps running in the background you sometimes find yourself staring at your launcher home screen that, you could've sworn, was just showing a different app a second ago.
Or the times when, after multi-tasking a bit, your phone starts becoming painfully slow. Turns out that some apps are so stubborn that they go on strike (continuously restarting) when LP kills them.
I'm sure many have experienced this. And I have seen some devs address this issue here and there. I though it would be useful to gather the info into one thread, to ease our (or my?) frustration on this issue.
What I wanna know is, what causes it exactly (why didn't it happen on KK?), and is there a solution to this? Or at some way to calm LP down a bit with his killing of innocent apps.
Thanks.
Click to expand...
Click to collapse
Im running 1/8 FML with synapse injected R10 kernel on my toro and with ksm and laptop mode enabled in synapse, I haven't had a launcher redraw in days. I don't have anything whitelisted either. However, the trade-off I have at the moment is I cant seem to stream videos on my stock browser. Havent tried a different browser or anything. I just uncheck those two settings and reboot and all is well, but my phone certainly works much better now, and no redraws, with neph settings for LMK
Hope something helps someone!
Thanks

erk1725 said:
Im running 1/8 FML with synapse injected R10 kernel on my toro and with ksm and laptop mode enabled in synapse, I haven't had a launcher redraw in days. I don't have anything whitelisted either. However, the trade-off I have at the moment is I cant seem to stream videos on my stock browser. Havent tried a different browser or anything. I just uncheck those two settings and reboot and all is well, but my phone certainly works much better now, and no redraws, with neph settings for LMK
Hope something helps someone!
Thanks
Click to expand...
Click to collapse
Perhaps you can noobify that a bit, lol. I had to google almost everything you mentioned. As I understand it, this Synapse allows you to tweak the kernel? And this KSM settings can improve this RAM issue? Care to elaborate? And what is laptop mode?
I've read about adjusting the LMK values to calm LP down a little. Any idea though why this was so necessary in LP, but not in KK? Is stock LP 'naturally' more RAM hungry than KK?

Djalaal said:
Perhaps you can noobify that a bit, lol. I had to google almost everything you mentioned. As I understand it, this Synapse allows you to tweak the kernel? And this KSM settings can improve this RAM issue? Care to elaborate? And what is laptop mode?
I've read about adjusting the LMK values to calm LP down a little. Any idea though why this was so necessary in LP, but not in KK? Is stock LP 'naturally' more RAM hungry than KK?
Click to expand...
Click to collapse
I can try to elaborate little bit, as Ive been flashing things and researching xda a lot, but I am still noob in how/why things are the way they are. From what I gather lollipop just handles memory differently then kk did. I think that is some of the reason as to why the "recent apps" persist through reboots now. Remember, our device was not really supposed to run kk and certainly not meant to run lollipop. The developers here are without a doubt amazing in what they know and what they do for us users. A new kernel and driver was necessary to run lollipop on the aging gnex. Now, some of the issues we are experiencing is a google issue and will only seem to get fixed when they get around to it. I know my nexus 7 (old) has some memory issues and lag and redraws from time to time....not as much as I noticed with my gnex before the changes were made I stated in the above post. I recently helped my friend root and upgrade his oneplus one to lollipop and he has the same issues we all have, maybe not as bad, but they are noticeable
A lot of the questions you have, have been discussed recently in bsmitty83 kernel thread, since I asked them. There are links there as to what KSM and laptop mode are and what they do. KSM-kernel same page merging helps with RAM and I believe laptop mode helps to conserve power. A lot of these things are geared at devices with low ram like the aging gnex, but the developers have done a great job at making lollipop a daily driver. Most users I think use trickstermod from playstore to tune kernel settings, and that is ok, however, you must purchase the paid version to tweak low memory settings, which I did. However, synapse, also found on playstore can also be used to tweak kernel settings, but the kernel has to contain UCI support for the synapse app to work. Synapse has more settings available to tweak than trickster does, like KSM and laptop mode, which have helped me very much. The only kernel I'm aware of that has UCI support for synapse is bsmitty83 Full_Auto R10, because osmosis made it work
Hopefully this was rather accurate and helpful and not convoluted! ha.....im sure some more knowledgeable people will come and correct anything I said that may be incorrect, but in the meantime, read through the R10 kernel thread and see what you come up with
What ROM and kernel are you currently using?
Thank you

erk1725 said:
...
The only kernel I'm aware of that has UCI support for synapse is bsmitty83 Full_Auto R10, because osmosis made it work.
...
What ROM and kernel are you currently using?
Click to expand...
Click to collapse
I'm currently using AOSP rom (by freshgimmi) and the Full Auto R10 you mentioned. I'll try injecting the new ramdisk now and see how it goes.

I noticed this issue as well for the first several days . However once I installed the new bootanimation from arter97 the issue doesn't occur anymore. Not sure if it's related but all I did was mount /system as rw and copied into the new lollipop boot animation from here: http://forum.xda-developers.com/android/software/arm-arm64-android-5-0-lollipop-t3032247
Djalaal said:
Does this even need an explanation? Lollipop kills apps like it's his hobby.
Even with only a few light (on RAM) user apps running in the background you sometimes find yourself staring at your launcher home screen that, you could've sworn, was just showing a different app a second ago.
Or the times when, after multi-tasking a bit, your phone starts becoming painfully slow. Turns out that some apps are so stubborn that they go on strike (continuously restarting) when LP kills them.
I'm sure many have experienced this. And I have seen some devs address this issue here and there. I though it would be useful to gather the info into one thread, to ease our (or my?) frustration on this issue.
What I wanna know is, what causes it exactly (why didn't it happen on KK?), and is there a solution to this? Or at some way to calm LP down a bit with his killing of innocent apps.
Thanks.
Click to expand...
Click to collapse

SpideyTheMan said:
I noticed this issue as well for the first several days . However once I installed the new bootanimation from arter97 the issue doesn't occur anymore. Not sure if it's related but all I did was mount /system as rw and copied into the new lollipop boot animation from here: http://forum.xda-developers.com/android/software/arm-arm64-android-5-0-lollipop-t3032247
Click to expand...
Click to collapse
I know about this issue. It is a memory leak during boot. It is a good catch, though all you're changing is the bootanimation.zip. AFAIK, it should not affect your system's performance after boot, once your phone is up and running. My issue is a different thing entirely. I never got bootloops (that is, when not messing around with xposed).

Okay, you're right. As a test last night I switched from FML 5.0.2 to LiquidSmooth's LP ROM and I'm not seeing any aggressive app kills in LiquidSmooth.
Djalaal said:
I know about this issue. It is a memory leak during boot. It is a good catch, though all you're changing is the bootanimation.zip. AFAIK, it should not affect your system's performance after boot, once your phone is up and running. My issue is a different thing entirely. I never got bootloops (that is, when not messing around with xposed).
Click to expand...
Click to collapse

erk1725 said:
Im running 1/8 FML with synapse injected R10 kernel on my toro and with ksm and laptop mode enabled in synapse, I haven't had a launcher redraw in days. I don't have anything whitelisted either. However, the trade-off I have at the moment is I cant seem to stream videos on my stock browser. Havent tried a different browser or anything. I just uncheck those two settings and reboot and all is well, but my phone certainly works much better now, and no redraws, with neph settings for LMK
Hope something helps someone!
Thanks
Click to expand...
Click to collapse
I have got synapse up and running. I AM wondering though, what LMK settings are you using? Cause the neph settings I know of tell me to set empty app to 370, but synapse only allows max 320... If you're following different settings, could you link the post for me?

Djalaal said:
I have got synapse up and running. I AM wondering though, what LMK settings are you using? Cause the neph settings I know of tell me to set empty app to 370, but synapse only allows max 320... If you're following different settings, could you link the post for me?
Click to expand...
Click to collapse
Glad you got everything up and running.....Im using Neph's settings for LMK, and your correct the empty app only goes up to 320 in synapse. There was a post somewhere where Neph said he was still tweaking his LMK values and I believe he mentioned about lower empty app to 330 or something, so I just set it to 320 in synapse and call it a day