Develop Bugs

Car mount

Anyone found a good car windshield mount for using GPS?
All the ones I've seen looks like they'd block view and are all designed to hold it vertically. (Would be be afraid of it falling out if there were not support on all 4 sides)

here's the samsung OEM one, probably the most secure but i just don't like the amount of visual "real estate" it takes up - ie too likely to block view of the road http://www.samsung.com/us/consumer/...ype=acc_detail&subsubtype=car-kits&returnurl=
i ordered one of these, fairly cheap, and it is a 3 point grip, off ebay, but figured it would serve till i decided which one i wanted to go with
might just make out of fiberglass to mount low on top of the dashboard (ie no pedestal)
same seller on ebay has two others, one is very similiar to the samsungs in term of the pedestal and the other is vent mount
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=190409500795&ssPageName=STRK:MEWNX:IT

http://www.amazon.com/gp/product/B00343295O/
I'm thinking about this one. I don't want anything on my windshield or dash.
-bZj

down8 said:
http://www.amazon.com/gp/product/B00343295O/
I'm thinking about this one. I don't want anything on my windshield or dash.
-bZj
Click to expand...
Click to collapse
I actually like that one... My phone doesn't get here until Tuesday (hopefully) but this looks like a great option

i like the samsung one actually, looks sturdy and secure, and the details say it comes with a suction cup windshield mount and a dash mount. I signed up to be notified of when the backorder clears up. Considering I cleared up my phone's gps issues today, i'm actually excited for this.

larryccf said:
here's the samsung OEM one, probably the most secure but i just don't like the amount of visual "real estate" it takes up - ie too likely to block view of the road http://www.samsung.com/us/consumer/...ype=acc_detail&subsubtype=car-kits&returnurl=
i ordered one of these, fairly cheap, and it is a 3 point grip, off ebay, but figured it would serve till i decided which one i wanted to go with
might just make out of fiberglass to mount low on top of the dashboard (ie no pedestal)
same seller on ebay has two others, one is very similiar to the samsungs in term of the pedestal and the other is vent mount
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=190409500795&ssPageName=STRK:MEWNX:IT
Click to expand...
Click to collapse
I like that mount let us know how you like it.

speoples20 said:
I like that mount let us know how you like it.
Click to expand...
Click to collapse
actually have it here now (came in the other day) and i was more impressed with it than i expected to be - the mechanical functions of the suction lock handle &
the knob that tightens the ball socket at the back of the holder (that socket that lets you finitely adjust angle 3 dimensionally) is actually impressively solid
the plastic holder shell, once i got it on the bracket, is stronger than i imagined - for $11 shipped, i'm happy and may just stay with this one

I bought this one
http://cgi.ebay.com/UNIVERSAL-CAR-M...Accessories&hash=item1c1429513c#ht_2148wt_784
It's tiny, I love it

larryccf said:
here's the samsung OEM one, probably the most secure but i just don't like the amount of visual "real estate" it takes up - ie too likely to block view of the road ...
Click to expand...
Click to collapse
I'm thinking of buying that ebay one. Does it have a hole for the camera? Not that I will use it too much but it would be cool to have a dash cam

dublued said:
I'm thinking of buying that ebay one. Does it have a hole for the camera? Not that I will use it too much but it would be cool to have a dash cam
Click to expand...
Click to collapse
wouldn't take much to cut a hole in it, but that isn't a bad idea - i've actually had moments where i thought about getting one everytime some idiot nearly causes an accident by cutting in front of me, from 2 lanes over to make an exit ramp he shouldn't be trying to make, only to hit the brakes hard just as he's in front of me (the cabs in vegas have em)

I got one that mounts in the cup holder. In my truck the windshield is too far away but there is a cup holder in the perfect position. The main cup holder that I use is still open so I don't lose anything. Also, it rotates to landscape mode (either direction) with a click.
http://www.amazon.com/Bracketron-UC..._1?ie=UTF8&s=automotive&qid=1279480388&sr=8-1

yea i guess it wouldn't take too much effort to take a dremel to the mount and make a hole for the camera.
Some one a few posts up linked to a very small mount that would leave the top of the phone uncovered.

i don't know if you guys know about the brodit/proclip ones, but they have been the best mount i've found for just about any phone or device i've ever used.
its an intermodal system that has an attatchment custom made for your car model and a separate one for your specific device.
i have found those to be the absolute best, hands down. i live in socal and spend a good part of my life on the road so i have tried about every brand and these are the best.
http://www.proclipusa.com/
they only have one for the galaxy s right now, but i emailed my customer service rep and he emailed back right away telling me they are working on a custom one for the vibrant and that he would email me when they were done.
i am currently using my hd2 mount with the gelskin on which sorta works until they come up with one for this device.

diaa08 said:
i don't know if you guys know about the brodit/proclip ones, but they have been the best mount i've found for just about any phone or device i've ever used.
its an intermodal system that has an attatchment custom made for your car model and a separate one for your specific device.
i have found those to be the absolute best, hands down. i live in socal and spend a good part of my life on the road so i have tried about every brand and these are the best.
they only have one for the galaxy s right now, but i emailed my customer service rep and he emailed back right away telling me they are working on a custom one for the vibrant and that he would email me when they were done.
i am currently using my hd2 mount with the gelskin on which sorta works until they come up with one for this device.
Click to expand...
Click to collapse
looks really nice, but hella expensive once you add the car mount and the device holder. i thought samsung's was expensive, but unless there's some huge benefit to the proclip i'm going to probably get samsung's or a 3rd party generic mount like arkon's universal mount

well the advantage such as it is is that once you buy the car mount it works for all devices in the future and fits your specific car like a glove. especially useful if you have a unique car (i drive an element) where suction mounts or other things don't work. i know its expensive, but i've found it to be worth it. my devices never fall or hit anything or vibrate and are always exactly within arms reach. definitely an investment though.

I haven't received my phone yet but does anybody know if the Vibrant has a "Car Mode"
I know the original droid would sense the magnets in the oem car mount go into car mode automatically. The Droid X does also.

dublued said:
I haven't received my phone yet but does anybody know if the Vibrant has a "Car Mode"
I know the original droid would sense the magnets in the oem car mount go into car mode automatically. The Droid X does also.
Click to expand...
Click to collapse
sort of.
It's not like my old nexus one .
All it does is reads you your emails and texts

diaa08 said:
....they only have one for the galaxy s right now, but i emailed my customer service rep and he emailed back right away telling me they are working on a custom one for the vibrant and that he would email me when they were done....
Click to expand...
Click to collapse
I thought the dimensions and specs for the internation galaxy s and the vibrant were identical?
siberslug said:
sort of.
It's not like my old nexus one .
All it does is reads you your emails and texts
Click to expand...
Click to collapse
How do you put it into car mode?

jblade1000 said:
How do you put it into car mode?
Click to expand...
Click to collapse
I'm pretty sure you could install that one car app on the Vibrant. I forgot what it was exactly called. Anyways, go to Settings > Text to Speech > Driving Mode.

jblade1000 said:
I thought the dimensions and specs for the internation galaxy s and the vibrant were identical?
Click to expand...
Click to collapse
i think you might be right... i know they are usually very specific about testing and stuff, so if that's the case im sure they will update the listing to say its available for both. on the hd2 the dimensions were slightly off and they had a mount for the tmous hd2 out about three days after launch.
EDIT: looking at official specs, the vibrant is supposed to be 0.3mm wider, for what its worth
dunno about the car mode, but doesn't sound like its the same thing. the question would be: does the vibrant have a magnetic sensor? otherwise its just going to have to be some kind of app, which i do not believe is included, but might be available on market...

Need a quality windshield mount

Hey guys, im in the market for a windshield mount for my EVO, and most of the ones I have seen on amazon have pretty bad reviews. What are some good ones you guys can recommend that can also work in landscape mode, and only on the windshield. Preferably with a pretty long neck as my windshield is a bit far. I looked through a few pages but didnt see much. Thanks!

There is a Kensington iphone, I know..it works, that people were raving about here that I purchased. For the price it is very good and 1/3 cheaper then the official Evo dock sold at Sprint stores.. Do some legwork and look in this section for the thread.

fmedina2 said:
Hey guys, im in the market for a windshield mount for my EVO, and most of the ones I have seen on amazon have pretty bad reviews. What are some good ones you guys can recommend that can also work in landscape mode, and only on the windshield. Preferably with a pretty long neck as my windshield is a bit far. I looked through a few pages but didnt see much. Thanks!
Click to expand...
Click to collapse
Search for my thread called 'Low profile car mount' and you'll find a good one.
Sent from my EVIL EVO using the XDA app.

Arkon Mega Clip all the way (+ Pro Fit VSM mounts)
best way to go in my opinion is the Arkon Mega Clip
The guys there are incredibly helpful (Spoke w a sales guy called Mark who was great), products are great, and they also provide VSMs (vehicle specific mounts) if you dont want the clip/suction cup connection. VSMs look much more clean in the car in my opinion. Not crazy expensive either.
They source their VSM mounts from a company called Pro Fit. Check their website out as well to see all the mounts they have. My Mazda 3 2010 wasnt supported according to their site, but again, very helpful guy called Ryan (he's the guy who actually installs the clips and takes pictures for the installation instructions...amongst other things Im sure) told me that it actually was, they just hadn't had a chance to update their site yet.
Hope this info helps someone.

fmedina2 said:
Hey guys, im in the market for a windshield mount for my EVO, and most of the ones I have seen on amazon have pretty bad reviews. What are some good ones you guys can recommend that can also work in landscape mode, and only on the windshield. Preferably with a pretty long neck as my windshield is a bit far. I looked through a few pages but didnt see much. Thanks!
Click to expand...
Click to collapse
Here you go:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=270641897373

i360 said:
There is a Kensington iphone, I know..it works, that people were raving about here that I purchased. For the price it is very good and 1/3 cheaper then the official Evo dock sold at Sprint stores.. Do some legwork and look in this section for the thread.
Click to expand...
Click to collapse
+1 for the Kensington. just got one the other day. pretty happy with it so far
google: "Kensington K39210US Vehicle Mount"

Scottie2H said:
+1 for the Kensington. just got one the other day. pretty happy with it so far
google: "Kensington K39210US Vehicle Mount"
Click to expand...
Click to collapse
Indeed... The Kingston was originally created for the iPhone/iTouch but works just perfect for us EVO users. HERE is my thread where you can see several reviews, one in the first post and one in THIS post. The goosneck is super strong and doesn't move while driving and at the same time when you need to adjust it can be done so with a little effort. That's a good thing as the gooseneck should be very stiff. In fact, so far it's the best I've seen to date. If I had to choose an alternative it would most likely be the HTC's OEM vehicle mount. Kind of pricey but if nothing else works for you. The only drawback I see of the HTC mount is it doesn't have a gooseneck, instead it has a small stem. This doesn't work out to well if your windshield has a very deep slope to it as the mount would be sitting too far back and you would have to squint to see your route or terrain on your map.
AMAZON has it selling for $11.99 right now. I haven't seen a better deal on anything else pertaining to a car mount that is low profile for the EVO.

i have been using a rocketfish GPS mount i got at best buy it has acctually been working really well. It fits the evo with any case has nice rubber grips ont he sides where it clamps and has to little feet that turn out to hold the "bottom" yuo can use in landscape or portrait and so far the suction cup has help on very well for me. the phone hasnt budged even going over train tracks and pot holes.
cost like 20$ they have them over by the GPS units

ProClipUSA

I am a big fan of these mounting/holder solutions. A little expensive but it is a brainless and clean installation that I have used for many years with various phones. Here is the response I got back from them regarding a Xoom holder:[FONT=&quot]
[/FONT][FONT=&quot]
Thank you for your continued interest in our products. We do anticipate making a Holder for the Xoom tablet, however due to the large number of new products we are developing, we cannot give a specific date as to when this will be available. You will be notified by e-mail as soon as the Holder has been received at our warehouse and is ready for online ordering.
http://www.proclipusa.com/
[/FONT]

o wow! I was about to order the ram one for my car buutttt... I wonder how long this will be?

sportedwood said:
o wow! I was about to order the ram one for my car buutttt... I wonder how long this will be?
Click to expand...
Click to collapse
Not sure but when the Captivate first came out, it took nearly two months before the holder was available.

Seems like they could modify the bracket for the iPad and make it a 'universal' adjustable tablet mount.
More variety and less models so less outlay on different types.
But what do I know...I'm just a consumer!

I ordered the Ram Mount and now its saying its out of stock with no date as to when

rljohnson said:
Seems like they could modify the bracket for the iPad and make it a 'universal' adjustable tablet mount.
More variety and less models so less outlay on different types.
But what do I know...I'm just a consumer!
Click to expand...
Click to collapse
they do this to an extent, but the deal with proclip/brodit is that they make a really high quality product that is tailored specifically for your device. part of why they are so good; its hard to explain how perfect my galaxy s mount from them is. I've often wondered how they make money (other than the price) given how much manpower they must expend just to make a bracket that works perfectly for each car and device. They said the same thing as the OP got about my phone and it took about 2 months for it to come to fruition, willing to wait if that is indeed the case.

double post. deleted.

[Update 5.16.12] (Magnetic) Steelie Mobile Device Holder W/pics

Anybody heard of this new car mount yet?
Steelie Mobile Device Holder
They also have an iPad tabletop stand.
Just ordered the car kit cause It looks like a great product. I love this idea!!!
The best thing is that if you send them your case. They'll punch a hole in it so that the magnet can mount straight to the phone and is a little more discrete.
They were originally on Kickstarter and almost doubled their goal.
Just wanted to post/support a (what seems to me like a great product) that is MADE IN THE U.S.A.
What do you guys think?
And no I am not affiliated with them in any way.
*****Update 5.16.12*****
Just received the car kit!
Includes:
1 x STEELIE Ball
1 x STEELIE Socket
1 x Alcohol prep pad
1 x Primer stick
1 x Instructions
Uploaded some photo's to show all that is included with instructions.
Also dims of "STEELIE Ball" (for dashboard) and "STEELIE socket" (for phone).
Will update in a few more days with results in
*Ease of use
*Ease if installation
*Durability
*GPS interference (if any)
*Anything you all might ask in the meantime

Im not 100% positive, but i think this will mess your GPS and NFC obviously.

evochuck said:
Im not 100% positive, but i think this will mess your GPS and NFC obviously.
Click to expand...
Click to collapse
Me either but when mine comes I'll post a review with pics and a video after some testing.
Although I can't test NFC. I will post GPS results from Google Navigation.
Sent from my Galaxy Nexus using XDA

Looks good, went to buy one for holding my Nexus in the car for $35. Went through to Paypal - shipping to Australia? $45!!!! NOPE.

wakd said:
Looks good, went to buy one for holding my Nexus in the car for $35. Went through to Paypal - shipping to Australia? $45!!!! NOPE.
Click to expand...
Click to collapse
That's unfortunate. Did you try to email them to see if they can help you with possibly offering different shipping options?

Saw these guys at a small town fair in Louisville, CO a week ago. Looked like a good product and the guys who own the company were very enthusiastic and helpful. I specifically asked about GPS interference etc. and they said they'd evaluated several phones with no issues.
I also expressed concern about the size/thickness of the engagement point on the phone and they said that they were working on a lower profile version.
Would really like to see these guys do well. Another small business emerging from middle-class America. Gotta love that.

Similar idea to tetrax, but may be easier to find a mounting spot since it looks like it doesn't need the same sq inch spot if you're not using the vent mounted version.

Wow, this is awesome and perfect for my needs! Just went in for one!
I have a window mount currently but it's a pain if I want to rotate it at all because you have to loosen the ball joint and then tighten it back up. And it's almost impossible to do it with the phone in the holder while keeping it at the angle you want.
That, and the suction cup will fall off from time to time. I've also gotten "yelled at" by a cop for having it up as well, so this will "obstruct my view" way less!
This is so much simpler to use, even though it will add a slight bit of bulk.

blue2107 said:
Anybody heard of this new car mount yet?
Steelie Mobile Device Holder
They also have an iPad tabletop stand.
Just ordered the car kit cause It looks like a great product. I love this idea!!!
The best thing is that if you send them your case. They'll punch a hole in it so that the magnet can mount straight to the phone and is a little more discrete.
They were originally on Kickstarter and almost doubled their goal.
Just wanted to post/support a (what seems to me like a great product) that is MADE IN THE U.S.A.
What do you guys think?
And no I am not affiliated with them in any way.
*****Update 5.16.12*****
Just received the car kit!
Includes:
1 x STEELIE Ball
1 x STEELIE Socket
1 x Alcohol prep pad
1 x Primer stick
1 x Instructions
Uploaded some photo's to show all that is included with instructions.
Also dims of "STEELIE Ball" (for dashboard) and "STEELIE socket" (for phone).
Will update in a few more days with results in
*Ease of use
*Ease if installation
*Durability
*GPS interference (if any)
*Anything you all might ask in the meantime
Click to expand...
Click to collapse
Thanks for posting about this here, Iv been researching this product everywhere that I can, but its a hard product to find info about, and whats even worse is that the company has not returned my calls or emails in 3 days since contacting them. Either way I found the steelie product on sale here and I already bought it. http://www.123inkcartridges.ca/accessories-product/ST_C.html and now Im hoping it can be used with my galaxy note i717. Now this is a big phone, probably the biggest and heaviest on the market and im worried it will not work. Does anyone know if my phone will work? Also the steelie on this website looks different than all the other steelie pictures iv found, is the one I bought an older or newer version of the steelie? I already contacted 123 ink cartridges and they assured me that its not counterfeit.

Let us know how the thing feels with a big ol', honkin' magnet on the back of it. I'm intrigued, but think having a magnet the size of a 50-cent piece on the back of my GNex would make my having a pretty custom case rather pointless.
The site also says it doesn't interfere with NFC. I'm dubious and would love to hear from some third parties.

shanek17 said:
Thanks for posting about this here, Iv been researching this product everywhere that I can, but its a hard product to find info about, and whats even worse is that the company has not returned my calls or emails in 3 days since contacting them. Either way I found the steelie product on sale here and I already bought it. http://www.123inkcartridges.ca/accessories-product/ST_C.html and now Im hoping it can be used with my galaxy note i717. Now this is a big phone, probably the biggest and heaviest on the market and im worried it will not work. Does anyone know if my phone will work? Also the steelie on this website looks different than all the other steelie pictures iv found, is the one I bought an older or newer version of the steelie? I already contacted 123 ink cartridges and they assured me that its not counterfeit.
Click to expand...
Click to collapse
NEVER MIND! the one i bought was a counterfeit... lame. oh well im getting a refund on it.

Any updates?
I see that they offer the Steelie Magnetic Phone Socket for purchase by itself, but dont see it listed for sale anywhere. Would be nice for different cell phone uses that drive the same car. I guess you could always mount it to a easy to swap out phone case if you have the same phone as other users.

Car mount for DIN (aftermarket stereo) space?

I have extra space under my stereo that I would like to somehow use for a phone mount. Any ideas?

Check in here, more specifically this . Let us know what you come up with (and take pictures!)

subvertz said:
Check in here, more specifically this . Let us know what you come up with (and take pictures!)
Click to expand...
Click to collapse
This is exactly what I'm looking for. Does he have any kind of instructions to do it?

Wow, that is ghetto. Mold it in with some duramix, flexible filler, and some paint. It's a little more work but it won't look like a Jerry rigged monstrosity.

I'm not sure exactly what parts he used, but the rods are theaded into the rings clamped into the center bracket. The threading makes it spread adjust to fit into the dash cubby.
Blown89, stick around here and you'll find the aftermarket hasn't been kind to us, so in the first 7 months A.G. (After Gnex), we had to Jerry rig things. For some applications its still the only way. While a precision molded, flush inset, pogo charging, quick release dash mound would obviously be better, we don't stifle creativity here.
If you are concerned about appearances, you could orient the spreaders vertically, which would then be hidden by the phone when mounted.

subvertz said:
Blown89, stick around here and you'll find the aftermarket hasn't been kind to us, so in the first 7 months A.G. (After Gnex), we had to Jerry rig things. For some applications its still the only way.
Click to expand...
Click to collapse
The only difference between that mount and one that looks factory is a little more time, effort, and knowledge. I understand that many people use wood and hardware store odds and ends because they don't know any better. Car audio sites have great information on how to integrate things like that into dash pieces should anyone want to tackle such a project.