Related
Anyone found a good car windshield mount for using GPS?
All the ones I've seen looks like they'd block view and are all designed to hold it vertically. (Would be be afraid of it falling out if there were not support on all 4 sides)
here's the samsung OEM one, probably the most secure but i just don't like the amount of visual "real estate" it takes up - ie too likely to block view of the road http://www.samsung.com/us/consumer/...ype=acc_detail&subsubtype=car-kits&returnurl=
i ordered one of these, fairly cheap, and it is a 3 point grip, off ebay, but figured it would serve till i decided which one i wanted to go with
might just make out of fiberglass to mount low on top of the dashboard (ie no pedestal)
same seller on ebay has two others, one is very similiar to the samsungs in term of the pedestal and the other is vent mount
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=190409500795&ssPageName=STRK:MEWNX:IT
http://www.amazon.com/gp/product/B00343295O/
I'm thinking about this one. I don't want anything on my windshield or dash.
-bZj
down8 said:
http://www.amazon.com/gp/product/B00343295O/
I'm thinking about this one. I don't want anything on my windshield or dash.
-bZj
Click to expand...
Click to collapse
I actually like that one... My phone doesn't get here until Tuesday (hopefully) but this looks like a great option
i like the samsung one actually, looks sturdy and secure, and the details say it comes with a suction cup windshield mount and a dash mount. I signed up to be notified of when the backorder clears up. Considering I cleared up my phone's gps issues today, i'm actually excited for this.
larryccf said:
here's the samsung OEM one, probably the most secure but i just don't like the amount of visual "real estate" it takes up - ie too likely to block view of the road http://www.samsung.com/us/consumer/...ype=acc_detail&subsubtype=car-kits&returnurl=
i ordered one of these, fairly cheap, and it is a 3 point grip, off ebay, but figured it would serve till i decided which one i wanted to go with
might just make out of fiberglass to mount low on top of the dashboard (ie no pedestal)
same seller on ebay has two others, one is very similiar to the samsungs in term of the pedestal and the other is vent mount
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=190409500795&ssPageName=STRK:MEWNX:IT
Click to expand...
Click to collapse
I like that mount let us know how you like it.
speoples20 said:
I like that mount let us know how you like it.
Click to expand...
Click to collapse
actually have it here now (came in the other day) and i was more impressed with it than i expected to be - the mechanical functions of the suction lock handle &
the knob that tightens the ball socket at the back of the holder (that socket that lets you finitely adjust angle 3 dimensionally) is actually impressively solid
the plastic holder shell, once i got it on the bracket, is stronger than i imagined - for $11 shipped, i'm happy and may just stay with this one
I bought this one
http://cgi.ebay.com/UNIVERSAL-CAR-M...Accessories&hash=item1c1429513c#ht_2148wt_784
It's tiny, I love it
larryccf said:
here's the samsung OEM one, probably the most secure but i just don't like the amount of visual "real estate" it takes up - ie too likely to block view of the road ...
Click to expand...
Click to collapse
I'm thinking of buying that ebay one. Does it have a hole for the camera? Not that I will use it too much but it would be cool to have a dash cam
dublued said:
I'm thinking of buying that ebay one. Does it have a hole for the camera? Not that I will use it too much but it would be cool to have a dash cam
Click to expand...
Click to collapse
wouldn't take much to cut a hole in it, but that isn't a bad idea - i've actually had moments where i thought about getting one everytime some idiot nearly causes an accident by cutting in front of me, from 2 lanes over to make an exit ramp he shouldn't be trying to make, only to hit the brakes hard just as he's in front of me (the cabs in vegas have em)
I got one that mounts in the cup holder. In my truck the windshield is too far away but there is a cup holder in the perfect position. The main cup holder that I use is still open so I don't lose anything. Also, it rotates to landscape mode (either direction) with a click.
http://www.amazon.com/Bracketron-UC..._1?ie=UTF8&s=automotive&qid=1279480388&sr=8-1
yea i guess it wouldn't take too much effort to take a dremel to the mount and make a hole for the camera.
Some one a few posts up linked to a very small mount that would leave the top of the phone uncovered.
i don't know if you guys know about the brodit/proclip ones, but they have been the best mount i've found for just about any phone or device i've ever used.
its an intermodal system that has an attatchment custom made for your car model and a separate one for your specific device.
i have found those to be the absolute best, hands down. i live in socal and spend a good part of my life on the road so i have tried about every brand and these are the best.
http://www.proclipusa.com/
they only have one for the galaxy s right now, but i emailed my customer service rep and he emailed back right away telling me they are working on a custom one for the vibrant and that he would email me when they were done.
i am currently using my hd2 mount with the gelskin on which sorta works until they come up with one for this device.
diaa08 said:
i don't know if you guys know about the brodit/proclip ones, but they have been the best mount i've found for just about any phone or device i've ever used.
its an intermodal system that has an attatchment custom made for your car model and a separate one for your specific device.
i have found those to be the absolute best, hands down. i live in socal and spend a good part of my life on the road so i have tried about every brand and these are the best.
they only have one for the galaxy s right now, but i emailed my customer service rep and he emailed back right away telling me they are working on a custom one for the vibrant and that he would email me when they were done.
i am currently using my hd2 mount with the gelskin on which sorta works until they come up with one for this device.
Click to expand...
Click to collapse
looks really nice, but hella expensive once you add the car mount and the device holder. i thought samsung's was expensive, but unless there's some huge benefit to the proclip i'm going to probably get samsung's or a 3rd party generic mount like arkon's universal mount
well the advantage such as it is is that once you buy the car mount it works for all devices in the future and fits your specific car like a glove. especially useful if you have a unique car (i drive an element) where suction mounts or other things don't work. i know its expensive, but i've found it to be worth it. my devices never fall or hit anything or vibrate and are always exactly within arms reach. definitely an investment though.
I haven't received my phone yet but does anybody know if the Vibrant has a "Car Mode"
I know the original droid would sense the magnets in the oem car mount go into car mode automatically. The Droid X does also.
dublued said:
I haven't received my phone yet but does anybody know if the Vibrant has a "Car Mode"
I know the original droid would sense the magnets in the oem car mount go into car mode automatically. The Droid X does also.
Click to expand...
Click to collapse
sort of.
It's not like my old nexus one .
All it does is reads you your emails and texts
diaa08 said:
....they only have one for the galaxy s right now, but i emailed my customer service rep and he emailed back right away telling me they are working on a custom one for the vibrant and that he would email me when they were done....
Click to expand...
Click to collapse
I thought the dimensions and specs for the internation galaxy s and the vibrant were identical?
siberslug said:
sort of.
It's not like my old nexus one .
All it does is reads you your emails and texts
Click to expand...
Click to collapse
How do you put it into car mode?
jblade1000 said:
How do you put it into car mode?
Click to expand...
Click to collapse
I'm pretty sure you could install that one car app on the Vibrant. I forgot what it was exactly called. Anyways, go to Settings > Text to Speech > Driving Mode.
jblade1000 said:
I thought the dimensions and specs for the internation galaxy s and the vibrant were identical?
Click to expand...
Click to collapse
i think you might be right... i know they are usually very specific about testing and stuff, so if that's the case im sure they will update the listing to say its available for both. on the hd2 the dimensions were slightly off and they had a mount for the tmous hd2 out about three days after launch.
EDIT: looking at official specs, the vibrant is supposed to be 0.3mm wider, for what its worth
dunno about the car mode, but doesn't sound like its the same thing. the question would be: does the vibrant have a magnetic sensor? otherwise its just going to have to be some kind of app, which i do not believe is included, but might be available on market...
has anyone purchased a decent car mount for the vibrant? I'm all over the web looking for one that I certainly wouldn't regret in buying. So, please post links, opinions, and maybe pics. thank you
I do not have it yet, but i saw this get posted several times with some good reviews http://www.dealextreme.com/details.dx/sku.37823
The Verizon Fascinate is coming out this week and the press release says there will be a mount. I'm going to take my phone by a Verizon store and see if they have one they'll open and let me check fit.
Car Dock – Attachable to the windshield or dashboard, the car dock displays turn-by-turn GPS navigation instructions, rotates freely between landscape and portrait modes, and features a preloaded Samsung “Car Home” application, giving customers access to everything the “Desk Home” app can do while on the go. The car dock is available for $39.99.
Click to expand...
Click to collapse
http://www.androidguys.com/2010/09/07/official-verizon-drops-samsung-fascinate-days-sept-9/
Due to the similar size and shape, I'm betting most generic ipod touch/iphone mounts out there will fit. Planning on checking walmarts offerings and maybe bestbuy sometime this week.
I just bought this:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150481766101&ssPageName=STRK:MEWNX:IT
I think its great if you're not using a case, snaps right it and doesn't move, and the mount seems nice and firm. The holes for the speakerphone and camera are all in the right places so its good to go.
Only complaint i have is the top snap portion is a little long and gets caught in the seam between the front and back cover if you're not careful. I snipped a tiny bit off the end of it to blunt the end a little bit, and am careful to pull the snap back when i slide the phone in, and its nice.
There are is a thread in here as well and/or the i9000 accessories forum that discusses a few options if you are using a case.
Xidroid said:
The Verizon Fascinate is coming out this week and the press release says there will be a mount. I'm going to take my phone by a Verizon store and see if they have one they'll open and let me check fit.[/url]
Click to expand...
Click to collapse
And on that note, i called my corp Verizon rep and ordered one - free overnight shipping. Part# is "SAMI500MNT"
SHould be here tomorrow @ 3:30'ish, that's when Mr. Fedex shows up.
I'll post details and pics if it's legit and ends up workin on the Vibrant.
(had to edit quote as i'm too new to post links)
Much to my dismay, not only is the micro-USB connector lower on the Fascinate than on the Vibrant, rendering the dock useless unless you remove the Vibrant's battery cover & insert at an angle, but the phone doesn't seem to recognize the usb connection. Although it does give you the audible signal that it's been plugged in - the charging indicator disappears immediately and audio is not passed through the 3.5mm jack at the back of the dock.
The overall design of the car dock is very nice and I can only hope TMO will bring something along these lines for the Vibrant.
Here are some pics of the car dock for the Fascinate, for those who happened to be curious.
LabattZ said:
Much to my dismay, not only is the micro-USB connector lower on the Fascinate than on the Vibrant, rendering the dock useless unless you remove the Vibrant's battery cover & insert at an angle, but the phone doesn't seem to recognize the usb connection. Although it does give you the audible signal that it's been plugged in - the charging indicator disappears immediately and audio is not passed through the 3.5mm jack at the back of the dock.
The overall design of the car dock is very nice and I can only hope TMO will bring something along these lines for the Vibrant.
Click to expand...
Click to collapse
That's too bad, it looked promising. Thanks for jumping on it and trying for us.
Since the Galaxy is light in weight and came with 2 back covers, I did a DIY with velcro. I lined it up to my center dash (horizontally), hooked up the AUX and charger and BAM...only 5 bucks! I now have Google NAV/traffic and .MP4s at my finger tips.
DaSmittyman said:
I do not have it yet, but i saw this get posted several times with some good reviews http://www.dealextreme.com/details.dx/sku.37823
Click to expand...
Click to collapse
I just ordered this one. I'll let everyone know how well it performs when it arrives.
I got this Arkon car mount.
http://www.amazon.com/Arkon-IPM515-...L68S/ref=sr_1_2?ie=UTF8&qid=1287158680&sr=8-2
It says its for iPhone, but works just as well with most phones out there.
I have this mount:
http://www.amazon.com/Arkon-Univers...U3GA/ref=sr_1_5?ie=UTF8&qid=1287178030&sr=8-5
Works great and holds the phone firmly.
The clingo mounts look awesome and have tons.of good reviews.
Texted While Driving
DKYang said:
I got this Arkon car mount.
http://www.amazon.com/Arkon-IPM515-...L68S/ref=sr_1_2?ie=UTF8&qid=1287158680&sr=8-2
It says its for iPhone, but works just as well with most phones out there.
Click to expand...
Click to collapse
Just got this mount today and well.......it's a very tight fit. This is perfect for anything smaller than the Vibrant size, otherwise it's a tight fit or won't fit at all. I won't recommend it if you need a mount where you can move the phone in and out of the mount quickly, otherwise, it should do well.
I use this one:
http://www.meritline.com/car-holder...-windshield-with-suction-mount---p-54018.aspx
With my Vibrant. Works great. You've got to be careful with the clip though to make sure you don't release it too soon it it'll snag between the battery cover and phone.
Overall very nice & doesn't obscure the phone at all & the phone can rotate 360 degrees with almost no effort (though it hasn't happened accidentally or when I've hit a bump or anything).
Anyone ever heard of proclipusa.com? They are a bit expensive but I had it for my iPhone in my 06 acura TL and it was awesome! Haven't ordered for the vibrant yet but am going to soon.
Sent from my SGH-T959 using XDA App
tekkguy said:
I have this mount:
http://www.amazon.com/Arkon-Univers...U3GA/ref=sr_1_5?ie=UTF8&qid=1287178030&sr=8-5
Works great and holds the phone firmly.
Click to expand...
Click to collapse
I got that too and it works pretty well. I've got an Xterra and it has a bumpy ride =\
~SB
Edit: I only use the vent not the windshield mount...
Xidroid said:
That's too bad, it looked promising. Thanks for jumping on it and trying for us.
Click to expand...
Click to collapse
Official dock is now available... the cheapest I could find it was at Newegg for $35. Part #ECS-M979BEGSTA, I think (but some stores use this same part number for the Fascinate dock).
tjhart85 said:
I use this one:
http://www.meritline.com/car-holder...-windshield-with-suction-mount---p-54018.aspx
With my Vibrant. Works great. You've got to be careful with the clip though to make sure you don't release it too soon it it'll snag between the battery cover and phone.
Overall very nice & doesn't obscure the phone at all & the phone can rotate 360 degrees with almost no effort (though it hasn't happened accidentally or when I've hit a bump or anything).
Click to expand...
Click to collapse
i have this one also and love it. tight fit and no matter how bumpy the road or water is (yes i use it on the boat) it stays exactly where you put it. on problem is you have to take it out of the case...
any good ones? and do they fit on a windshield without block everything haha
I got this after some research... i've got the same problem... do not want anything to block my view as i'm sitting very low in a full bucket seat. I've ordered, but haven't reach me yet hopefully within the next few days...
http://www.ebay.com.sg/itm/NEW-10-T...?pt=US_Tablet_Accessories&hash=item3f11a55ff1
I keep meaning to get this one. I like it because it's got clips on the sides and the bottom. It has really good ratings and is really cheap, so it seems like it would be a good one. I don't own it, though, so I don't honestly know.
http://www.amazon.com/MENB-ME-04-Wi...XKVY/ref=sr_1_1?ie=UTF8&qid=1322255942&sr=8-1
Athenon87 said:
I keep meaning to get this one. I like it because it's got clips on the sides and the bottom. It has really good ratings and is really cheap, so it seems like it would be a good one. I don't own it, though, so I don't honestly know.
http://www.amazon.com/MENB-ME-04-Wi...XKVY/ref=sr_1_1?ie=UTF8&qid=1322255942&sr=8-1
Click to expand...
Click to collapse
I have this one. It works pretty well with an acceptable amount of vibration. Only issue was the suction cup portion became detached at the joint from the mount portion. Nothing a little gorilla glue couldn't fix though.
Sent from my Xoom using xda premium
Don't know if anyone has come across this yet, but I hope to be ordering this soon: Ram mount. Apparently it works with cases as well.
I have this mount and it is great. Hardly any vibration. Good company and mounts.
Sent from my Xoom using xda premium
nooomoto said:
I have this one. It works pretty well with an acceptable amount of vibration. Only issue was the suction cup portion became detached at the joint from the mount portion. Nothing a little gorilla glue couldn't fix though.
Sent from my Xoom using xda premium
Click to expand...
Click to collapse
Is the suction cup really strong enough to hold the (fairly considerable) weight of the Xoom?
The suction holder I have for my TomTom is the best I have used so far and even that falls off occasionally with the meagre weight of my TomTom. I don't really care about my TomTom but I don't want to be picking bits of Xoom out of my footwell.
mobileweasel said:
Don't know if anyone has come across this yet, but I hope to be ordering this soon: Ram mount. Apparently it works with cases as well.
Click to expand...
Click to collapse
Where are you going to mount this? Just curious, because I can't see drilling into the dash for that.
mobileweasel said:
Don't know if anyone has come across this yet, but I hope to be ordering this soon: Apparently it works with cases as well.
Click to expand...
Click to collapse
RE: Ram mount
Ive got one in my vehicle now. I have nothing but positive things to say about it. The customer service I got from Ram Mount was outstanding! They even offered me 3d solid models so I could mock up my build before installing.
mobileweasel said:
Don't know if anyone has come across this yet, but I hope to be ordering this soon: Ram mount. Apparently it works with cases as well.
Click to expand...
Click to collapse
We use these to mount Xoom tablets on our tow motors. They work VERY well even in a manufacturing environment.
C.Durbin
Athenon87 said:
I keep meaning to get this one. I like it because it's got clips on the sides and the bottom. It has really good ratings and is really cheap, so it seems like it would be a good one. I don't own it, though, so I don't honestly know.
http://www.amazon.com/MENB-ME-04-Wi...XKVY/ref=sr_1_1?ie=UTF8&qid=1322255942&sr=8-1
Click to expand...
Click to collapse
I just ordered myself one of these the other day. It was half the price of the ram mount and review of the ram mount were stating how the arm was a little to short. Anybody has any updated opinions or tips on using the MENB-ME-04-Windshield?
I already know that I would never leave this thing on the windshield with my xoom if i get out of the car.
I've been using this for a ciuple of weeks now. It is a vent-mounted holder and, as my vents are a little bit to the loose side, I was a little afraid the whole thing wouldn't provide a solid mount for the rather heavy xoom... However, it sits in the car, not as stiff as a rock, but close enough Also, all it blocks are my vents, nothing else
If you guys want, I can post some pictures
Neurosis said:
I got this after some research... i've got the same problem... do not want anything to block my view as i'm sitting very low in a full bucket seat. I've ordered, but haven't reach me yet hopefully within the next few days...
Click to expand...
Click to collapse
I also bought this mount and I love it. Work extremely well. I've tried a few other ones and this one is by far the best.
I've been using a Ram Mount (product #RAM-HOL-MOTO3U) in my car since last Christmas and absolutely love it. It's mounted to a AMPs mounting plate that extends a couple of inches out from the console. I had the plate installed years ago for satellite radio use (no longer needed!). To accomplish the mounting I also utilized one of Ram Mount's arm-style ball mounts (product #RAM-B-101U).
This solution isn't the cheapest, but I think it's the best. It can be positioned in just about any fashion with the double socketed arm, stays off the windshield/out of your line of sight, and is immediately accessible right above the gear shift.
I can post some pics later if anyone is interested.
I decided that I'd go ahead and get a tablet so I went with this device. I primarily got this so my daughter could watch movies on car trips and my wife can dub around the net at home. Most all the mounting discussion seems to be front-seat mounts but I'm looking to mount for the back seat, prefereable on a driver's side headrest. I was looking at the Grip Daddy (http://gripdaddymounts.com/) mounts, and debating between the two they offer but I havne't been able to find too much about them.
I was wondering if anyone had any feedback or experience with them, or alternatives they'd prefer? I'm looking for rear-headrest mounting and would prefer the ability to position it near the middlle, but directly behind the driver's headrest is also fine. ('08 Dodge Caravan)
Thanks for any suggestions, or even tips in general about mounting this thing.
Wouldn't something like this work as well for a fraction?
http://www.ebay.com/itm/320731033899?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Thanks for the response, I didn't articulate that clearly enough, but that's the reason I'm asking. I see a lot of mounts that are around that price, but I didn't know if there was something about the Grip Daddy and it's $60 price tag that actually made it worth it, or if the inexpensive non OEM ebay/amazon items are as good as OEM. (That's what I usually buy for my cell phones)
I haven't seen any discussion about headrest mounts at all so I was just kind of throwing it out there in case there was someone else who had experience with this type of mount. I'll just end up getting the cheap one and posting something about it.
The Grip Daddy defenitivly looks more robust, but is it worth it?
I don't know if the eBay / Chineese stuff is sturdy or loose, but usually it's "decent enough". And for the price, well, even if it's a worthless peace of junk, it's 10$ so you will still be able to put food on the table!
I will most likely buy one in the next month or so, I'll let you know if you didn't got one by then!
NOTE: The Grip Daddy is installed on the "upper" part of the headrest, that might be a problem if it's used by kids (mostly)
Well, my daughter is young so she wont be interacting with it unsupervised. We're basically only going to use it as a television for longer car trips so with her strapped in her car seat, this will be just the right distance away.
I went ahead and ordered this one. I didn't want to buy from overseas, as well as wait for the overseas shipping.
http://www.ebay.com/itm/360394774751
I'll post back, with some pix about how it goes.
Spovik said:
http://www.ebay.com/itm/360394774751
Click to expand...
Click to collapse
So I got this in today and I set it up. I can't say I'm too impressed. It's probably fine, unless you hit a bump. It's flimsy and cheap. I initially mounted it with the support holding the tablet upward, but that was way too flimsy. I opted to mount it going down rather than up and I figure if I can put some sort of support behind it to make it secure, but overall it will get the job done.
If you're looking for a headrest mount and plan on using it relatively regularly, I'd spend a little extra for a more rugged mount.
I'm in my third cheap headrest mount. They all broke on the same spot, the pivot joint, different brands bought on amazon and eBay...enough. the grip daddy seems interesting and cheaper than the pad holder...can't decide yet.
Oh yeah, what broke them was my 7 year old daughter
Leaving the car with the backpack, other times, the 2nd row seat laying on it for passengers coming in and out of the 3rd row.
Sent from my Transformer Prime TF201 using xda premium
I totally agree with you.
Mine has not broken in over a year of operation, but it makes noise. it is always creaking if it is holding a tablet. I am looking from something more robust as well and had not seen that one that you found. There was another brand out there that looked promising for a $30 price range, but I cannot think of the name right now. (Arkon? http://www.arkon.com/tablet-accessories/universal-tablet-headrest-mount.html).
Anywho, If anyone tries out the Gripdaddy, I would love to know how it works. That creaking is driving me insane!!!
I ended up buying the proclip mount. No ball joints, it's aespherical joint hold together by a screw. Can't easily break this. Expensive, but versatile, since i already have a coupke of device holders.
Proclipusa.com
do you already have it, or are you waiting for it?
I noticed that they did not list the GT 10.1 in the drop down box...
crashmw said:
do you already have it, or are you waiting for it?
I noticed that they did not list the GT 10.1 in the drop down box...
Click to expand...
Click to collapse
I'm waiting for it. After i got just the headrest support bits, I ordered the 10.1 holders from the main page, they're suppose to be compatible with any device holder they sell.
Sent from my GT-P6800 using xda premium
Okay, got it, installed one, going to install the other later today.
BEST HEADREST MOUNT EVER. Solid as a rock, at least as solid as your seat/headrest poles. It can stay as close to the back of the seat/headrest as you want, so if any removable case [edit: holder] could be slick, this is it. The other ones I bought on ebay/Amazon (4 in total, all broken by kids/3rd row seat reclining) were big, and they would leave the tablet in the way (say when the kids need to go through one door only). Not this one.
As a bonus, since I bought the slide mounts (male/female) so that the tablet mount is removable, it can leave virtually no trace there's a mount there, quick and easy in/out.
Very expensive for what it is, but you're not paying for the material, but for the engineering. At least that's what I told myself after forking close to $250.00 for it...grr.
Thanks for the follow up,but $250 is not worth it to me. We don't spend enough time in the car at this point to justify me spending that much money on a mount.
If you're happy with it, that's what counts.
anyone else find any lower priced successful options?
Go with Gripdaddy
Although Gripdaddy is a bit more pricey ($60 instead of $10), yes, there is a reason. Unlike the other cheaper models, Gripdaddy does not just break. I've had mine for several months, and it has yet to fail me. It's not made out of cheap plastic - it LASTS! I don't see the shaking either. Instead of spending tons of money replacing the cheap, plastic headrest mounts - I suggest buying the Gripdaddy once and not worrying about future problems.
Anybody heard of this new car mount yet?
Steelie Mobile Device Holder
They also have an iPad tabletop stand.
Just ordered the car kit cause It looks like a great product. I love this idea!!!
The best thing is that if you send them your case. They'll punch a hole in it so that the magnet can mount straight to the phone and is a little more discrete.
They were originally on Kickstarter and almost doubled their goal.
Just wanted to post/support a (what seems to me like a great product) that is MADE IN THE U.S.A.
What do you guys think?
And no I am not affiliated with them in any way.
*****Update 5.16.12*****
Just received the car kit!
Includes:
1 x STEELIE Ball
1 x STEELIE Socket
1 x Alcohol prep pad
1 x Primer stick
1 x Instructions
Uploaded some photo's to show all that is included with instructions.
Also dims of "STEELIE Ball" (for dashboard) and "STEELIE socket" (for phone).
Will update in a few more days with results in
*Ease of use
*Ease if installation
*Durability
*GPS interference (if any)
*Anything you all might ask in the meantime
Im not 100% positive, but i think this will mess your GPS and NFC obviously.
evochuck said:
Im not 100% positive, but i think this will mess your GPS and NFC obviously.
Click to expand...
Click to collapse
Me either but when mine comes I'll post a review with pics and a video after some testing.
Although I can't test NFC. I will post GPS results from Google Navigation.
Sent from my Galaxy Nexus using XDA
Looks good, went to buy one for holding my Nexus in the car for $35. Went through to Paypal - shipping to Australia? $45!!!! NOPE.
wakd said:
Looks good, went to buy one for holding my Nexus in the car for $35. Went through to Paypal - shipping to Australia? $45!!!! NOPE.
Click to expand...
Click to collapse
That's unfortunate. Did you try to email them to see if they can help you with possibly offering different shipping options?
Saw these guys at a small town fair in Louisville, CO a week ago. Looked like a good product and the guys who own the company were very enthusiastic and helpful. I specifically asked about GPS interference etc. and they said they'd evaluated several phones with no issues.
I also expressed concern about the size/thickness of the engagement point on the phone and they said that they were working on a lower profile version.
Would really like to see these guys do well. Another small business emerging from middle-class America. Gotta love that.
Similar idea to tetrax, but may be easier to find a mounting spot since it looks like it doesn't need the same sq inch spot if you're not using the vent mounted version.
Wow, this is awesome and perfect for my needs! Just went in for one!
I have a window mount currently but it's a pain if I want to rotate it at all because you have to loosen the ball joint and then tighten it back up. And it's almost impossible to do it with the phone in the holder while keeping it at the angle you want.
That, and the suction cup will fall off from time to time. I've also gotten "yelled at" by a cop for having it up as well, so this will "obstruct my view" way less!
This is so much simpler to use, even though it will add a slight bit of bulk.
blue2107 said:
Anybody heard of this new car mount yet?
Steelie Mobile Device Holder
They also have an iPad tabletop stand.
Just ordered the car kit cause It looks like a great product. I love this idea!!!
The best thing is that if you send them your case. They'll punch a hole in it so that the magnet can mount straight to the phone and is a little more discrete.
They were originally on Kickstarter and almost doubled their goal.
Just wanted to post/support a (what seems to me like a great product) that is MADE IN THE U.S.A.
What do you guys think?
And no I am not affiliated with them in any way.
*****Update 5.16.12*****
Just received the car kit!
Includes:
1 x STEELIE Ball
1 x STEELIE Socket
1 x Alcohol prep pad
1 x Primer stick
1 x Instructions
Uploaded some photo's to show all that is included with instructions.
Also dims of "STEELIE Ball" (for dashboard) and "STEELIE socket" (for phone).
Will update in a few more days with results in
*Ease of use
*Ease if installation
*Durability
*GPS interference (if any)
*Anything you all might ask in the meantime
Click to expand...
Click to collapse
Thanks for posting about this here, Iv been researching this product everywhere that I can, but its a hard product to find info about, and whats even worse is that the company has not returned my calls or emails in 3 days since contacting them. Either way I found the steelie product on sale here and I already bought it. http://www.123inkcartridges.ca/accessories-product/ST_C.html and now Im hoping it can be used with my galaxy note i717. Now this is a big phone, probably the biggest and heaviest on the market and im worried it will not work. Does anyone know if my phone will work? Also the steelie on this website looks different than all the other steelie pictures iv found, is the one I bought an older or newer version of the steelie? I already contacted 123 ink cartridges and they assured me that its not counterfeit.
Let us know how the thing feels with a big ol', honkin' magnet on the back of it. I'm intrigued, but think having a magnet the size of a 50-cent piece on the back of my GNex would make my having a pretty custom case rather pointless.
The site also says it doesn't interfere with NFC. I'm dubious and would love to hear from some third parties.
shanek17 said:
Thanks for posting about this here, Iv been researching this product everywhere that I can, but its a hard product to find info about, and whats even worse is that the company has not returned my calls or emails in 3 days since contacting them. Either way I found the steelie product on sale here and I already bought it. http://www.123inkcartridges.ca/accessories-product/ST_C.html and now Im hoping it can be used with my galaxy note i717. Now this is a big phone, probably the biggest and heaviest on the market and im worried it will not work. Does anyone know if my phone will work? Also the steelie on this website looks different than all the other steelie pictures iv found, is the one I bought an older or newer version of the steelie? I already contacted 123 ink cartridges and they assured me that its not counterfeit.
Click to expand...
Click to collapse
NEVER MIND! the one i bought was a counterfeit... lame. oh well im getting a refund on it.
Any updates?
I see that they offer the Steelie Magnetic Phone Socket for purchase by itself, but dont see it listed for sale anywhere. Would be nice for different cell phone uses that drive the same car. I guess you could always mount it to a easy to swap out phone case if you have the same phone as other users.