Anyone found a good car windshield mount for using GPS?
All the ones I've seen looks like they'd block view and are all designed to hold it vertically. (Would be be afraid of it falling out if there were not support on all 4 sides)
here's the samsung OEM one, probably the most secure but i just don't like the amount of visual "real estate" it takes up - ie too likely to block view of the road http://www.samsung.com/us/consumer/...ype=acc_detail&subsubtype=car-kits&returnurl=
i ordered one of these, fairly cheap, and it is a 3 point grip, off ebay, but figured it would serve till i decided which one i wanted to go with
might just make out of fiberglass to mount low on top of the dashboard (ie no pedestal)
same seller on ebay has two others, one is very similiar to the samsungs in term of the pedestal and the other is vent mount
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=190409500795&ssPageName=STRK:MEWNX:IT
http://www.amazon.com/gp/product/B00343295O/
I'm thinking about this one. I don't want anything on my windshield or dash.
-bZj
down8 said:
http://www.amazon.com/gp/product/B00343295O/
I'm thinking about this one. I don't want anything on my windshield or dash.
-bZj
Click to expand...
Click to collapse
I actually like that one... My phone doesn't get here until Tuesday (hopefully) but this looks like a great option
i like the samsung one actually, looks sturdy and secure, and the details say it comes with a suction cup windshield mount and a dash mount. I signed up to be notified of when the backorder clears up. Considering I cleared up my phone's gps issues today, i'm actually excited for this.
larryccf said:
here's the samsung OEM one, probably the most secure but i just don't like the amount of visual "real estate" it takes up - ie too likely to block view of the road http://www.samsung.com/us/consumer/...ype=acc_detail&subsubtype=car-kits&returnurl=
i ordered one of these, fairly cheap, and it is a 3 point grip, off ebay, but figured it would serve till i decided which one i wanted to go with
might just make out of fiberglass to mount low on top of the dashboard (ie no pedestal)
same seller on ebay has two others, one is very similiar to the samsungs in term of the pedestal and the other is vent mount
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=190409500795&ssPageName=STRK:MEWNX:IT
Click to expand...
Click to collapse
I like that mount let us know how you like it.
speoples20 said:
I like that mount let us know how you like it.
Click to expand...
Click to collapse
actually have it here now (came in the other day) and i was more impressed with it than i expected to be - the mechanical functions of the suction lock handle &
the knob that tightens the ball socket at the back of the holder (that socket that lets you finitely adjust angle 3 dimensionally) is actually impressively solid
the plastic holder shell, once i got it on the bracket, is stronger than i imagined - for $11 shipped, i'm happy and may just stay with this one
I bought this one
http://cgi.ebay.com/UNIVERSAL-CAR-M...Accessories&hash=item1c1429513c#ht_2148wt_784
It's tiny, I love it
larryccf said:
here's the samsung OEM one, probably the most secure but i just don't like the amount of visual "real estate" it takes up - ie too likely to block view of the road ...
Click to expand...
Click to collapse
I'm thinking of buying that ebay one. Does it have a hole for the camera? Not that I will use it too much but it would be cool to have a dash cam
dublued said:
I'm thinking of buying that ebay one. Does it have a hole for the camera? Not that I will use it too much but it would be cool to have a dash cam
Click to expand...
Click to collapse
wouldn't take much to cut a hole in it, but that isn't a bad idea - i've actually had moments where i thought about getting one everytime some idiot nearly causes an accident by cutting in front of me, from 2 lanes over to make an exit ramp he shouldn't be trying to make, only to hit the brakes hard just as he's in front of me (the cabs in vegas have em)
I got one that mounts in the cup holder. In my truck the windshield is too far away but there is a cup holder in the perfect position. The main cup holder that I use is still open so I don't lose anything. Also, it rotates to landscape mode (either direction) with a click.
http://www.amazon.com/Bracketron-UC..._1?ie=UTF8&s=automotive&qid=1279480388&sr=8-1
yea i guess it wouldn't take too much effort to take a dremel to the mount and make a hole for the camera.
Some one a few posts up linked to a very small mount that would leave the top of the phone uncovered.
i don't know if you guys know about the brodit/proclip ones, but they have been the best mount i've found for just about any phone or device i've ever used.
its an intermodal system that has an attatchment custom made for your car model and a separate one for your specific device.
i have found those to be the absolute best, hands down. i live in socal and spend a good part of my life on the road so i have tried about every brand and these are the best.
http://www.proclipusa.com/
they only have one for the galaxy s right now, but i emailed my customer service rep and he emailed back right away telling me they are working on a custom one for the vibrant and that he would email me when they were done.
i am currently using my hd2 mount with the gelskin on which sorta works until they come up with one for this device.
diaa08 said:
i don't know if you guys know about the brodit/proclip ones, but they have been the best mount i've found for just about any phone or device i've ever used.
its an intermodal system that has an attatchment custom made for your car model and a separate one for your specific device.
i have found those to be the absolute best, hands down. i live in socal and spend a good part of my life on the road so i have tried about every brand and these are the best.
they only have one for the galaxy s right now, but i emailed my customer service rep and he emailed back right away telling me they are working on a custom one for the vibrant and that he would email me when they were done.
i am currently using my hd2 mount with the gelskin on which sorta works until they come up with one for this device.
Click to expand...
Click to collapse
looks really nice, but hella expensive once you add the car mount and the device holder. i thought samsung's was expensive, but unless there's some huge benefit to the proclip i'm going to probably get samsung's or a 3rd party generic mount like arkon's universal mount
well the advantage such as it is is that once you buy the car mount it works for all devices in the future and fits your specific car like a glove. especially useful if you have a unique car (i drive an element) where suction mounts or other things don't work. i know its expensive, but i've found it to be worth it. my devices never fall or hit anything or vibrate and are always exactly within arms reach. definitely an investment though.
I haven't received my phone yet but does anybody know if the Vibrant has a "Car Mode"
I know the original droid would sense the magnets in the oem car mount go into car mode automatically. The Droid X does also.
dublued said:
I haven't received my phone yet but does anybody know if the Vibrant has a "Car Mode"
I know the original droid would sense the magnets in the oem car mount go into car mode automatically. The Droid X does also.
Click to expand...
Click to collapse
sort of.
It's not like my old nexus one .
All it does is reads you your emails and texts
diaa08 said:
....they only have one for the galaxy s right now, but i emailed my customer service rep and he emailed back right away telling me they are working on a custom one for the vibrant and that he would email me when they were done....
Click to expand...
Click to collapse
I thought the dimensions and specs for the internation galaxy s and the vibrant were identical?
siberslug said:
sort of.
It's not like my old nexus one .
All it does is reads you your emails and texts
Click to expand...
Click to collapse
How do you put it into car mode?
jblade1000 said:
How do you put it into car mode?
Click to expand...
Click to collapse
I'm pretty sure you could install that one car app on the Vibrant. I forgot what it was exactly called. Anyways, go to Settings > Text to Speech > Driving Mode.
jblade1000 said:
I thought the dimensions and specs for the internation galaxy s and the vibrant were identical?
Click to expand...
Click to collapse
i think you might be right... i know they are usually very specific about testing and stuff, so if that's the case im sure they will update the listing to say its available for both. on the hd2 the dimensions were slightly off and they had a mount for the tmous hd2 out about three days after launch.
EDIT: looking at official specs, the vibrant is supposed to be 0.3mm wider, for what its worth
dunno about the car mode, but doesn't sound like its the same thing. the question would be: does the vibrant have a magnetic sensor? otherwise its just going to have to be some kind of app, which i do not believe is included, but might be available on market...
Related
has anyone purchased a decent car mount for the vibrant? I'm all over the web looking for one that I certainly wouldn't regret in buying. So, please post links, opinions, and maybe pics. thank you
I do not have it yet, but i saw this get posted several times with some good reviews http://www.dealextreme.com/details.dx/sku.37823
The Verizon Fascinate is coming out this week and the press release says there will be a mount. I'm going to take my phone by a Verizon store and see if they have one they'll open and let me check fit.
Car Dock – Attachable to the windshield or dashboard, the car dock displays turn-by-turn GPS navigation instructions, rotates freely between landscape and portrait modes, and features a preloaded Samsung “Car Home” application, giving customers access to everything the “Desk Home” app can do while on the go. The car dock is available for $39.99.
Click to expand...
Click to collapse
http://www.androidguys.com/2010/09/07/official-verizon-drops-samsung-fascinate-days-sept-9/
Due to the similar size and shape, I'm betting most generic ipod touch/iphone mounts out there will fit. Planning on checking walmarts offerings and maybe bestbuy sometime this week.
I just bought this:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150481766101&ssPageName=STRK:MEWNX:IT
I think its great if you're not using a case, snaps right it and doesn't move, and the mount seems nice and firm. The holes for the speakerphone and camera are all in the right places so its good to go.
Only complaint i have is the top snap portion is a little long and gets caught in the seam between the front and back cover if you're not careful. I snipped a tiny bit off the end of it to blunt the end a little bit, and am careful to pull the snap back when i slide the phone in, and its nice.
There are is a thread in here as well and/or the i9000 accessories forum that discusses a few options if you are using a case.
Xidroid said:
The Verizon Fascinate is coming out this week and the press release says there will be a mount. I'm going to take my phone by a Verizon store and see if they have one they'll open and let me check fit.[/url]
Click to expand...
Click to collapse
And on that note, i called my corp Verizon rep and ordered one - free overnight shipping. Part# is "SAMI500MNT"
SHould be here tomorrow @ 3:30'ish, that's when Mr. Fedex shows up.
I'll post details and pics if it's legit and ends up workin on the Vibrant.
(had to edit quote as i'm too new to post links)
Much to my dismay, not only is the micro-USB connector lower on the Fascinate than on the Vibrant, rendering the dock useless unless you remove the Vibrant's battery cover & insert at an angle, but the phone doesn't seem to recognize the usb connection. Although it does give you the audible signal that it's been plugged in - the charging indicator disappears immediately and audio is not passed through the 3.5mm jack at the back of the dock.
The overall design of the car dock is very nice and I can only hope TMO will bring something along these lines for the Vibrant.
Here are some pics of the car dock for the Fascinate, for those who happened to be curious.
LabattZ said:
Much to my dismay, not only is the micro-USB connector lower on the Fascinate than on the Vibrant, rendering the dock useless unless you remove the Vibrant's battery cover & insert at an angle, but the phone doesn't seem to recognize the usb connection. Although it does give you the audible signal that it's been plugged in - the charging indicator disappears immediately and audio is not passed through the 3.5mm jack at the back of the dock.
The overall design of the car dock is very nice and I can only hope TMO will bring something along these lines for the Vibrant.
Click to expand...
Click to collapse
That's too bad, it looked promising. Thanks for jumping on it and trying for us.
Since the Galaxy is light in weight and came with 2 back covers, I did a DIY with velcro. I lined it up to my center dash (horizontally), hooked up the AUX and charger and BAM...only 5 bucks! I now have Google NAV/traffic and .MP4s at my finger tips.
DaSmittyman said:
I do not have it yet, but i saw this get posted several times with some good reviews http://www.dealextreme.com/details.dx/sku.37823
Click to expand...
Click to collapse
I just ordered this one. I'll let everyone know how well it performs when it arrives.
I got this Arkon car mount.
http://www.amazon.com/Arkon-IPM515-...L68S/ref=sr_1_2?ie=UTF8&qid=1287158680&sr=8-2
It says its for iPhone, but works just as well with most phones out there.
I have this mount:
http://www.amazon.com/Arkon-Univers...U3GA/ref=sr_1_5?ie=UTF8&qid=1287178030&sr=8-5
Works great and holds the phone firmly.
The clingo mounts look awesome and have tons.of good reviews.
Texted While Driving
DKYang said:
I got this Arkon car mount.
http://www.amazon.com/Arkon-IPM515-...L68S/ref=sr_1_2?ie=UTF8&qid=1287158680&sr=8-2
It says its for iPhone, but works just as well with most phones out there.
Click to expand...
Click to collapse
Just got this mount today and well.......it's a very tight fit. This is perfect for anything smaller than the Vibrant size, otherwise it's a tight fit or won't fit at all. I won't recommend it if you need a mount where you can move the phone in and out of the mount quickly, otherwise, it should do well.
I use this one:
http://www.meritline.com/car-holder...-windshield-with-suction-mount---p-54018.aspx
With my Vibrant. Works great. You've got to be careful with the clip though to make sure you don't release it too soon it it'll snag between the battery cover and phone.
Overall very nice & doesn't obscure the phone at all & the phone can rotate 360 degrees with almost no effort (though it hasn't happened accidentally or when I've hit a bump or anything).
Anyone ever heard of proclipusa.com? They are a bit expensive but I had it for my iPhone in my 06 acura TL and it was awesome! Haven't ordered for the vibrant yet but am going to soon.
Sent from my SGH-T959 using XDA App
tekkguy said:
I have this mount:
http://www.amazon.com/Arkon-Univers...U3GA/ref=sr_1_5?ie=UTF8&qid=1287178030&sr=8-5
Works great and holds the phone firmly.
Click to expand...
Click to collapse
I got that too and it works pretty well. I've got an Xterra and it has a bumpy ride =\
~SB
Edit: I only use the vent not the windshield mount...
Xidroid said:
That's too bad, it looked promising. Thanks for jumping on it and trying for us.
Click to expand...
Click to collapse
Official dock is now available... the cheapest I could find it was at Newegg for $35. Part #ECS-M979BEGSTA, I think (but some stores use this same part number for the Fascinate dock).
tjhart85 said:
I use this one:
http://www.meritline.com/car-holder...-windshield-with-suction-mount---p-54018.aspx
With my Vibrant. Works great. You've got to be careful with the clip though to make sure you don't release it too soon it it'll snag between the battery cover and phone.
Overall very nice & doesn't obscure the phone at all & the phone can rotate 360 degrees with almost no effort (though it hasn't happened accidentally or when I've hit a bump or anything).
Click to expand...
Click to collapse
i have this one also and love it. tight fit and no matter how bumpy the road or water is (yes i use it on the boat) it stays exactly where you put it. on problem is you have to take it out of the case...
So it's time to find a car mount for the SGS2.
For the HD2 I used an air vent mount (this). I don't like the windscreen suction mounts (just my preference, even though they tend to be more flexible in terms of positioning the device), and the positioning of the air vent mount is almost perfect in my car. The only thing that is a little annoying is that the fixed one obviously don't allow any turning at all, which can be annoying when it's sunny as I'd prefer to have the screen point more directly at me.
Therefore I'm looking for an air vent mount that has some sort of swivel included - basically something similar to this for, or perhaps something more generic like this or this.
Has anyone used any of these (or the windscreen suction mount equivalents) from either Ultimate Addons or Arkon? How well made and durable are they? How well do they hold their position?
Are there other ones I've missed that I should consider?
Thanks in advance for any input!
I'm looking for the same thing, preferably specific to the S2 (much better to slip it into a custom holder, rather than placing it in a generic one then tighten the grips etc).
Something like this (no link allowed.. see gripmount on mobilefun) on the air vent would be great.
I also like vent holders! I just buy a cheap generic one and modify it to fit my needs.
Obviously this involves taking apart my vent and drilling holes in the phone holder, put you get just the thing you need! Plus its also wayyyy more stable as you use cable ties to get it solidly in place.
The mounts that usually come with the vent holder are flimsy and usually end up falling off!
The gripmount on mobilefun looks great, but I can't see how it manages to fit the SGS2 both with and without a case! I'm using a silicone skin with mine and would rather have something that will work without me having to take it on and off. Is the mount slightly bendy so the phone just clips in? Anyone got any experience of these?
I've decided to just hold fire until the official Samsung mount comes out - it looks pretty good on their website and I can order the desktop dock at the same time.
Breffo multi-fuctional Car-dock/Cradle
I saw this product last year and thought this might be interesting?! My apologies for not yet have those for review, didn't need it yet. But when i have a car this i would definitely buy.
The brand is Breffo and the product is Spiderpodium, there website is www.breffo.com
Interesting idea . . . on fleabay for £13 (item 200603319280)
Might pick one up and see how it works as a vent holder . . .
Edit: The reviews are great, so ordered a black one off ebay. There are white ones for just £8 on Amazon if you're not fussed about colour! Will return and let y'all know how well it works . . .
Spiderpodium looks superb, definitely getting one of those. One of the ebay sellers is only around the corner from me, so I've contacted to ask if I can collect. Will report back once I've got hold of one.
I've made my own:
robbiekhan that looks awesome, good work. How much would you charge to make more had to ask lol
It's simple case (hah!!) of sticking and cutting a few bits together really so i couldn't charge to do such a thing as you'd be much better off doing it lol, plus it's fun, something you've made and it can be a conversation piece
My HTC Desire mount DIY article can be found on LifeHacker, method is exactly the same, just omit anything Desire for Galaxy S II
http://lifehacker.com/5593245/build-a-custom-phone-car-mount-for-under-10
Looks so cool! What case did you use - the one from ebay you mentioned in the other tread?
Just bought this: http://www.dealextreme.com/p/car-windshield-mini-holder-swivel-mount-for-cell-phone-5-0-7-5cm-41529
It's just under 4€ :O So you can't go wrong whit it.
http://youtu.be/ZR5oWIzW_Ns
EDIT: Also this might be interesting too: Mini Car Cigarette Powered 1000mA USB Adapter/Charger
Yup same case!
Yufina said:
Just bought this: http://www.dealextreme.com/p/car-windshield-mini-holder-swivel-mount-for-cell-phone-5-0-7-5cm-41529
It's just under 4€ :O So you can't go wrong whit it.
http://youtu.be/ZR5oWIzW_Ns
EDIT: Also this might be interesting too: Mini Car Cigarette Powered 1000mA USB Adapter/Charger
Click to expand...
Click to collapse
That looks very good actually! Going to buy! If anything it means I don't need to take my phone out of the case
I'm going to pick up a Griffin Windowseat I think, as I need something compatible with other phones too.
I have got one one the magic mounts (aka Dash Genie), but due to the textured back the SGS2 doesn't stick
If you wanted universal vent mount, have a look at this by Herbert Richter. If you however want a device specific, and if you want a small project, than I see that Brodit holder for Samsung Galaxy S II seems to be listed, you can covert this into a vent mount or windscreen suction mount using this adaptor plate.
Nice - thanks. For now I decided to take a punt on the £8 white Spiderpodium for its uniqueness - when it arrives I'll see how well made and durable it is, and if that doesn't work out I think a custom/self-made solution might well be the way to go.
Yufina said:
Just bought this: http://www.dealextreme.com/p/car-windshield-mini-holder-swivel-mount-for-cell-phone-5-0-7-5cm-41529
It's just under 4€ :O So you can't go wrong whit it.
http://youtu.be/ZR5oWIzW_Ns
Click to expand...
Click to collapse
Looks good and cheap enough!
Mine arrived this morning, check out a quick review and a couple of pics here
Summary: great! Will probably get another one, in fact
robbiekhan said:
I've made my own:
Click to expand...
Click to collapse
Looks very good!
Let's see if I can make one myself
Yufina said:
Just bought this: http://www.dealextreme.com/p/car-windshield-mini-holder-swivel-mount-for-cell-phone-5-0-7-5cm-41529
It's just under 4€ :O So you can't go wrong whit it.
http://youtu.be/ZR5oWIzW_Ns
EDIT: Also this might be interesting too: Mini Car Cigarette Powered 1000mA USB Adapter/Charger
Click to expand...
Click to collapse
I wonder if this will work if you attatch it to the windshield...
On the left of the SGS2 there are the volume buttons. And the miniholder, is really, ehhhh, mini... So I think the phone will hit the window, or if you place it in the holder in a way the phone does not hit the window the volume buttons will be pressed all the time...
I'd prefer something windshield mounted. If I'm not getting the 3-pin version, I don't see why I should have to remove my case for the car dock, so I'd like one of those generic car mounts.
I have no experience with them though. What's the best one? Any recommendations?
check out Ram Mounts. google it
They are the most sturdy, but can be expensive.
i use the X mount one with my gnex and its awesome.
FYI I saw someone mention using the standard Garmin nuvi suction cup mount, with a GN in a case it does seem to fit.
Sent from my Galaxy Nexus using XDA App
i have the european dock (3 pins present) and very firm. Little tight but other than that holds it very well
Javillanueva67 said:
i have the european dock (3 pins present) and very firm. Little tight but other than that holds it very well
Click to expand...
Click to collapse
This thread is about the verizon nexus. You say you have the european samsung dock with the pogo pins and the verizon phone fits in it?
If so, do the pins line up and work to put in in car mode?
I ordered the VZW/LTE specific version of the car dock from mycellworld.com. its supposedly legit in that it has the 3 pins and is definitely for the LTE handset. its on back order, supposed to ship next week. will review as soon as it shows up.
Sent from my Galaxy Nexus using Tapatalk
p.s. I have the extended OEM battery and I also have the generic car dock (no 3 pins) and it fits no problem.
Sent from my Galaxy Nexus using Tapatalk
I know you said you prefer windshield mounted but I just bought the Tetrax FIXWAY mount and I love it. There is a large thread on it with lots of pics/videos. That thread is one of the reasons I bought it.
I too was looking for a car mount to be used with a case and an extended battery. I was just going to use a generic one off of amazon that was like a clamp style. Even though the Tetrax doesn't suction cup to the windshield, I think it is worth you looking at if you haven't already.
I mounted mine onto my dash and think it works perfectly. It doesn't obstruct my view at all and its is just a quick glance down to check navigation/music.
The phone is really quick to just 'snap' it in place. The only downside to me is that you have to manually plug in the power and aux cords but I don't even see this as a true downside since you will have to do this with any generic mount you would need in order to keep the case on.
If you are interested and would like me to take any additional pictures for you just let me know and I would be happy to do what I can
ProClip adjustable width mount is what I'd recommend
bpowder1966 said:
check out Ram Mounts. google it
They are the most sturdy, but can be expensive.
i use the X mount one with my gnex and its awesome.
Click to expand...
Click to collapse
I ordered the X-grip mount with a medium size arm and the adhesive rubber ball base(I plan on keeping my car until its run into the ground) on January 11th.
Soon after ordering they informed me that the base wasn't in stock but it would ship out in 1-2 weeks. 2 weeks past with no word, then he said it would ship out at the end of the week. Still no shipping
I figured CS people would know not to give unrealistic ETA dates(especially when ram-mount makes the damn things themselves), especially over and over again, stringing the customer along...
rickt said:
I ordered the VZW/LTE specific version of the car dock from mycellworld.com. its supposedly legit in that it has the 3 pins and is definitely for the LTE handset. its on back order, supposed to ship next week. will review as soon as it shows up.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Let us know when you get it because I read a lot on the thread about the 3-pin that some people got burned by claims of the docks having 3 pin connection when they actually didn't. Keep us updated!
bpowder1966 said:
check out Ram Mounts. google it
They are the most sturdy, but can be expensive.
i use the X mount one with my gnex and its awesome.
Click to expand...
Click to collapse
Can it swivel to horizontal mode? Currently, this one seems to be the best.
jcwarren217 said:
I know you said you prefer windshield mounted but I just bought the Tetrax FIXWAY mount and I love it. There is a large thread on it with lots of pics/videos. That thread is one of the reasons I bought it.
I too was looking for a car mount to be used with a case and an extended battery. I was just going to use a generic one off of amazon that was like a clamp style. Even though the Tetrax doesn't suction cup to the windshield, I think it is worth you looking at if you haven't already.
I mounted mine onto my dash and think it works perfectly. It doesn't obstruct my view at all and its is just a quick glance down to check navigation/music.
The phone is really quick to just 'snap' it in place. The only downside to me is that you have to manually plug in the power and aux cords but I don't even see this as a true downside since you will have to do this with any generic mount you would need in order to keep the case on.
If you are interested and would like me to take any additional pictures for you just let me know and I would be happy to do what I can
Click to expand...
Click to collapse
I'm really tempted. Both options above are expensive. I was worried that the attachment thing might look like ****, but from the pictures in that thread, it doesn't look too bad. Same question though, can I turn it to landscape for Navigation? Also, how sturdy is the connection? Will it fall off as my car hits a bump or something?
acr89 said:
ProClip adjustable width mount is what I'd recommend
Click to expand...
Click to collapse
+1 to ProClip! They have a mount that can adjust with different cases, and it's very sturdy. The one I have mounts to my vent though (I prefer this anyway since my windshield is so...sloped). They are kinda pricey also, but they don't look too bulky and are specifically made for your car model. I love mine.
Would like to bump this thread to see if anyone else had suggestions for good universal car mounts/docks that will work with a GNEX in a case.
Samcobra said:
I'd prefer something windshield mounted. If I'm not getting the 3-pin version, I don't see why I should have to remove my case for the car dock, so I'd like one of those generic car mounts.
I have no experience with them though. What's the best one? Any recommendations?
Click to expand...
Click to collapse
try the iBolt pro dock alumina... this car dock works with just about any phone, and especially works great with the galaxy nexus.... this cardock allows you to place it on either the windshield, dashboard, or air vent since extra pins are supplied to place the dock there and theres no need to remove your case from your phone... which is a god send.. it only cost me about $35 on amazon, so i cant argue with the price... i have excellent photos of it, that i'll share as soon as i reach the 10 post mark, that allows me to attach files and externals link...
SNNTEC said:
i have excellent photos of it, that i'll share as soon as i reach the 10 post mark, that allows me to attach files and externals link...
Click to expand...
Click to collapse
You're past 10 posts, pics please!
Anybody heard of this new car mount yet?
Steelie Mobile Device Holder
They also have an iPad tabletop stand.
Just ordered the car kit cause It looks like a great product. I love this idea!!!
The best thing is that if you send them your case. They'll punch a hole in it so that the magnet can mount straight to the phone and is a little more discrete.
They were originally on Kickstarter and almost doubled their goal.
Just wanted to post/support a (what seems to me like a great product) that is MADE IN THE U.S.A.
What do you guys think?
And no I am not affiliated with them in any way.
*****Update 5.16.12*****
Just received the car kit!
Includes:
1 x STEELIE Ball
1 x STEELIE Socket
1 x Alcohol prep pad
1 x Primer stick
1 x Instructions
Uploaded some photo's to show all that is included with instructions.
Also dims of "STEELIE Ball" (for dashboard) and "STEELIE socket" (for phone).
Will update in a few more days with results in
*Ease of use
*Ease if installation
*Durability
*GPS interference (if any)
*Anything you all might ask in the meantime
Im not 100% positive, but i think this will mess your GPS and NFC obviously.
evochuck said:
Im not 100% positive, but i think this will mess your GPS and NFC obviously.
Click to expand...
Click to collapse
Me either but when mine comes I'll post a review with pics and a video after some testing.
Although I can't test NFC. I will post GPS results from Google Navigation.
Sent from my Galaxy Nexus using XDA
Looks good, went to buy one for holding my Nexus in the car for $35. Went through to Paypal - shipping to Australia? $45!!!! NOPE.
wakd said:
Looks good, went to buy one for holding my Nexus in the car for $35. Went through to Paypal - shipping to Australia? $45!!!! NOPE.
Click to expand...
Click to collapse
That's unfortunate. Did you try to email them to see if they can help you with possibly offering different shipping options?
Saw these guys at a small town fair in Louisville, CO a week ago. Looked like a good product and the guys who own the company were very enthusiastic and helpful. I specifically asked about GPS interference etc. and they said they'd evaluated several phones with no issues.
I also expressed concern about the size/thickness of the engagement point on the phone and they said that they were working on a lower profile version.
Would really like to see these guys do well. Another small business emerging from middle-class America. Gotta love that.
Similar idea to tetrax, but may be easier to find a mounting spot since it looks like it doesn't need the same sq inch spot if you're not using the vent mounted version.
Wow, this is awesome and perfect for my needs! Just went in for one!
I have a window mount currently but it's a pain if I want to rotate it at all because you have to loosen the ball joint and then tighten it back up. And it's almost impossible to do it with the phone in the holder while keeping it at the angle you want.
That, and the suction cup will fall off from time to time. I've also gotten "yelled at" by a cop for having it up as well, so this will "obstruct my view" way less!
This is so much simpler to use, even though it will add a slight bit of bulk.
blue2107 said:
Anybody heard of this new car mount yet?
Steelie Mobile Device Holder
They also have an iPad tabletop stand.
Just ordered the car kit cause It looks like a great product. I love this idea!!!
The best thing is that if you send them your case. They'll punch a hole in it so that the magnet can mount straight to the phone and is a little more discrete.
They were originally on Kickstarter and almost doubled their goal.
Just wanted to post/support a (what seems to me like a great product) that is MADE IN THE U.S.A.
What do you guys think?
And no I am not affiliated with them in any way.
*****Update 5.16.12*****
Just received the car kit!
Includes:
1 x STEELIE Ball
1 x STEELIE Socket
1 x Alcohol prep pad
1 x Primer stick
1 x Instructions
Uploaded some photo's to show all that is included with instructions.
Also dims of "STEELIE Ball" (for dashboard) and "STEELIE socket" (for phone).
Will update in a few more days with results in
*Ease of use
*Ease if installation
*Durability
*GPS interference (if any)
*Anything you all might ask in the meantime
Click to expand...
Click to collapse
Thanks for posting about this here, Iv been researching this product everywhere that I can, but its a hard product to find info about, and whats even worse is that the company has not returned my calls or emails in 3 days since contacting them. Either way I found the steelie product on sale here and I already bought it. http://www.123inkcartridges.ca/accessories-product/ST_C.html and now Im hoping it can be used with my galaxy note i717. Now this is a big phone, probably the biggest and heaviest on the market and im worried it will not work. Does anyone know if my phone will work? Also the steelie on this website looks different than all the other steelie pictures iv found, is the one I bought an older or newer version of the steelie? I already contacted 123 ink cartridges and they assured me that its not counterfeit.
Let us know how the thing feels with a big ol', honkin' magnet on the back of it. I'm intrigued, but think having a magnet the size of a 50-cent piece on the back of my GNex would make my having a pretty custom case rather pointless.
The site also says it doesn't interfere with NFC. I'm dubious and would love to hear from some third parties.
shanek17 said:
Thanks for posting about this here, Iv been researching this product everywhere that I can, but its a hard product to find info about, and whats even worse is that the company has not returned my calls or emails in 3 days since contacting them. Either way I found the steelie product on sale here and I already bought it. http://www.123inkcartridges.ca/accessories-product/ST_C.html and now Im hoping it can be used with my galaxy note i717. Now this is a big phone, probably the biggest and heaviest on the market and im worried it will not work. Does anyone know if my phone will work? Also the steelie on this website looks different than all the other steelie pictures iv found, is the one I bought an older or newer version of the steelie? I already contacted 123 ink cartridges and they assured me that its not counterfeit.
Click to expand...
Click to collapse
NEVER MIND! the one i bought was a counterfeit... lame. oh well im getting a refund on it.
Any updates?
I see that they offer the Steelie Magnetic Phone Socket for purchase by itself, but dont see it listed for sale anywhere. Would be nice for different cell phone uses that drive the same car. I guess you could always mount it to a easy to swap out phone case if you have the same phone as other users.
In search of a vehicle dock that will accommodate the size of the Galaxy S III with a case.
Preferably one that fits in the heating/AC vents, or mounts on the front of your dashboard and not on top of the dashboard. I guess one without the suction cup.
Going to be mainly used for Navigation.
Any suggestions?
SamsungVibrant said:
In search of a vehicle dock that will accommodate the size of the Galaxy S III with a case.
Preferably one that fits in the heating/AC vents, or mounts on the front of your dashboard and not on top of the dashboard. I guess one without the suction cup.
Going to be mainly used for Navigation.
Any suggestions?
Click to expand...
Click to collapse
I got this guy:
http://www.ebay.com/itm/160825622184?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Goes in the CD player. I wanted something that wasn't a windshield mount.
Maverick777 said:
I got this guy:
http://www.ebay.com/itm/160825622184?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Goes in the CD player. I wanted something that wasn't a windshield mount.
Click to expand...
Click to collapse
Thanks, never seen one that slides into the CD slot. Btw...that link said for iPhone 4S.
SamsungVibrant said:
Any suggestions?
Click to expand...
Click to collapse
http://www.slipgripcarmounts.com/Galaxy-S-III-I9300_c_27331.html
And chose one for you. I've ordered this one http://www.slipgripcarmounts.com/Sl...Using-OtterBox-Commuter-Case---_p_130841.html yesterday cause I've had the same one for my Fascinate for almost 2 years. Perfect fit and very good quality.
Maverick777 said:
I got this guy:
http://www.ebay.com/itm/160825622184?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Goes in the CD player. I wanted something that wasn't a windshield mount.
Click to expand...
Click to collapse
That's really cool!
Maverick777 said:
I got this guy:
http://www.ebay.com/itm/160825622184?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Goes in the CD player. I wanted something that wasn't a windshield mount.
Click to expand...
Click to collapse
That looks really cool. Does it go it and out of the CD player easily? Do you just leave it there or is it easy enough to quickly plug in when you want?
Does it still "see" the satellites well enough from the lower position in the car?
I assume you can confirm the GS3 fits well in it even though it says it's for iphone?
Anyone know of other CD mounts to compare to?
Amazon review for this one you got are generally very good.
http://www.amazon.com/Mounteks-Universal-Hands-Free-Devices-Magellan/dp/B004E5W3D4
Best car holder I've ever had!
Don't know if people just don't know about these or just don't like them. I got mine back in February and used it on my old E4GT and now the S3, I absolutly love it! The key is, for me anyways, getting a TPU case( always use TPU so no biggie there ) take an exacto knife and cut a perfect sized cut out for the tiny magnet. If you do it correctly the looks isn't bad at all( use the small magnet, works fine for me ) and more importantly it wont 'wobble' on the table, lays flat. Sorry don't have any pics of my old setup and haven't cut out my new one yet. Also, nice that we have replaceable back covers in case you're worried about it marring up the back if you want to remove it later.
As far as construction quality, magnet hold strenght both are superb, haven't hadd one inceidentl fall off the holder. Also magent doesn't seem to interfer with wifi or cell at all. NFC I haven't tested yet, but my suggestion would be to mount it towards the top side of the case away from the battery( like were the carrier logo is on the back )
Anyways just my 2 cents, check out youtube they have a couple good reviews of it on there.
http://eshop.tetrax.us/
I can't post pics/links but I followed Lifehacker's guide to making a car mount out of office supplies (site should be easy to find with that information). It works surprisingly well, even with the size of the S3 and the fact that my vehicle's vents aren't perfectly suited for the application. I thought it'd be kind of ghetto but it's hidden while in use and easy to remove and stash away when not in use.
I'll make a thread with pics once I have enough posts.
I got this one: http://www.amazon.com/SLIM-GRIP-WIN...CAR-STEREO/dp/B004H4FN6Q/ref=cm_aya_orig_subj
http://forum.xda-developers.com/showthread.php?t=1769055
Take your time and look around. There's plenty of car mounts that will fit this phone with a case.
Seems like most are the suction cup kind
will work for any phone even tablets
Sorry long time forum reader but first time posting. I can't post a link but search "soundgate m2 car mount"
You can probably find them cheaper. Used my for the og dinc for 2 years. I put the disc on my case instead of the phone. But I would have no reservations to put it directly on the phone as the disc is extremely unobtrusive. Just clean the spot you want to mount the arm really well with included wipe or rubbing alcohol. The arm mounts with a 3m adhesive pad and folds almost flush when not in use. Very slick. Put the discs on anything you want to dock to the arm. I forget how much weight it can handle but I saw a tablet being used as well. Sorry tried to upload pictures and after an afternoon of searching the forums on how to do it, i still cant get it. Just google "soundgate m2 car mount" you wont be dissapointed.
I have this one. I love it. Works with any case, holds tight. I have mine in the vents. http://www.breffo.com/collections/spiderpodium
lynseyw said:
I have this one. I love it. Works with any case, holds tight. I have mine in the vents. http://www.breffo.com/collections/spiderpodium
Click to expand...
Click to collapse
That looks interesting, never seen that before. How do you put that in your vent? Looks like it wasn't designed for that.
SamsungVibrant said:
That looks interesting, never seen that before. How do you put that in your vent? Looks like it wasn't designed for that.
Click to expand...
Click to collapse
you just kinda put it in the vents, and then bend it down. works great! It really stays put too. Check out the gallery section on the site, there are other pics of it in the vents. Got one for a friend and he loves it. It really does hold tight in the vent, even more so then ones designed for the vent. Easy to take out too
lynseyw said:
you just kinda put it in the vents, and then bend it down. works great! It really stays put too. Check out the gallery section on the site, there are other pics of it in the vents. Got one for a friend and he loves it. It really does hold tight in the vent, even more so then ones designed for the vent. Easy to take out too
Click to expand...
Click to collapse
Can I order if I live in the U.S.? Also I don't see the gallery.
lexluthor said:
That looks really cool. Does it go it and out of the CD player easily? Do you just leave it there or is it easy enough to quickly plug in when you want?
Does it still "see" the satellites well enough from the lower position in the car?
I assume you can confirm the GS3 fits well in it even though it says it's for iphone?
Anyone know of other CD mounts to compare to?
Amazon review for this one you got are generally very good.
http://www.amazon.com/Mounteks-Universal-Hands-Free-Devices-Magellan/dp/B004E5W3D4
Click to expand...
Click to collapse
It goes in very easy. It only takes a few seconds to install. It holds the S III securely even with a case on it.
Here's a video:
http://www.youtube.com/watch?v=B8uy-XfhEqQ&feature=related
Maverick777 said:
It goes in very easy. It only takes a few seconds to install. It holds the S III securely even with a case on it.
Here's a video:
http://www.youtube.com/watch?v=B8uy-XfhEqQ&feature=related
Click to expand...
Click to collapse
Does it hold the phone in the vertical position, or only horizontal?
RubenRybnik said:
Don't know if people just don't know about these or just don't like them. I got mine back in February and used it on my old E4GT and now the S3, I absolutly love it! The key is, for me anyways, getting a TPU case( always use TPU so no biggie there ) take an exacto knife and cut a perfect sized cut out for the tiny magnet. If you do it correctly the looks isn't bad at all( use the small magnet, works fine for me ) and more importantly it wont 'wobble' on the table, lays flat. Sorry don't have any pics of my old setup and haven't cut out my new one yet. Also, nice that we have replaceable back covers in case you're worried about it marring up the back if you want to remove it later.
As far as construction quality, magnet hold strenght both are superb, haven't hadd one inceidentl fall off the holder. Also magent doesn't seem to interfer with wifi or cell at all. NFC I haven't tested yet, but my suggestion would be to mount it towards the top side of the case away from the battery( like were the carrier logo is on the back )
Anyways just my 2 cents, check out youtube they have a couple good reviews of it on there.
http://eshop.tetrax.us/
Click to expand...
Click to collapse
wow that's nice! Why did you have to cut out a hole in your case, the link says it comes with a case (I'm assuming with the magnet attached)!
SamsungVibrant said:
In search of a vehicle dock that will accommodate the size of the Galaxy S III with a case.
Preferably one that fits in the heating/AC vents, or mounts on the front of your dashboard and not on top of the dashboard. I guess one without the suction cup.
Going to be mainly used for Navigation.
Any suggestions?
Click to expand...
Click to collapse
ProClip. It is a little more money, but well worth it. I would get the proper mount for your vehicle (vent or side mount) and the adjustable phone mount so you can use it with a case. The also make a clip so you can move the mount from car to car.
Sadly, mine was recently stolen, but they offered me a discount because of my loss.
So I created a ghetto version as a sort of joke in exchange.
http://m.youtube.com/watch?v=jH3XoLqfXsY
www.proclipusa.com
SamsungVibrant said:
In search of a vehicle dock that will accommodate the size of the Galaxy S III with a case.
Preferably one that fits in the heating/AC vents, or mounts on the front of your dashboard and not on top of the dashboard. I guess one without the suction cup.
Going to be mainly used for Navigation.
Any suggestions?
Click to expand...
Click to collapse
I use this one and I love it.. http://www.amazon.com/MSW-Exogear-Exomount-Universal-Mount/dp/B004Z8ZLOS/ref=sr_1_1?ie=UTF8&qid=1342868939&sr=8-1&keywords=exogear+car+mount