Related
Just bought the Xoom 2 Media Edition, and whilst I'm very happy with the tablet, the portfolio case is proving to be something of a letdown. Specifically it won't stay upright in the 'film watching' position; it just slides back and falls down :-(
Anyone else have any comments about this case?
Sent from my XOOM 2 ME using xda premium
Same problem here... Is a nice thin case but can't be used as a stand in any position.
Sent from my XOOM 2 ME using Tapatalk
I have uploaded a video demonstrating the problem to YouTube.
https://www.youtube.com/watch?v=1XOp8suI9NU
Sent from my Android tablet
Raised a support case with Motorola, and they are going to replace it. Will see if the replacement is any better when it arrives...
Sent from my Android tablet using xda premium
TheFluffyOne said:
I have uploaded a video demonstrating the problem to YouTube.
https://www.youtube.com/watch?v=1XOp8suI9NU
Sent from my Android tablet
Click to expand...
Click to collapse
the correct way
The rubberised strips on mine are on the other side of the flap on the case... no wonder it doesn't work!
Sent from my XOOM 2 ME using xda premium
Here's what mine looks like when open.
Sent from my Android phone
Your case is just fine... Fold it inside out. Try to see my photo....
Sent from my XOOM 2 ME using Tapatalk
If I try to fold it like that, it sits completely vertically and just falls forward. Will have a bit more of a play with it...
Sent from my XOOM 2 ME using xda premium
Replacement case arrived from Motorola and... it stays upright now! The problem with the first case was definitely that the rubberised strips weren't... er... rubbery enough
The 'correct' way to stand it up is as I attempted in my video; it just requires a case that's not faulty ;-)
Sent from my Android phone
The bad news is that after a week, the replacement case also has lost its ability to stand up. My conclusion is: don't bother with this case if you want to use it to prop up the Xoom :-(
The rubbery strips on the case that should prop it up seem to be a major design flaw. Bad show, Motorola.
Sent from my XOOM 2 ME using xda premium
I just got the Motorola, case from heck, to work. I used foam double sided mounting tape. The kind used to hang light pictures on the wall without using nails.
2 x ½" x 1" strips put into each groove. The tape did not stick well to the textured case. I heated it a shot from a gas lighter (biggest trick in this hack). Zoom's metal case is highly polished and touches the strips in a line. It does not get glue on it and is not sticky removed from the groove.
I'm sure that the strips will need replacement but it takes about 1 minute and I got roll of tape from a $1 store for a couple of feet or tape.
Bad Asciii
______________________________________________________
xxxxxxxxxx Rear ^
xxxxxxxxxx
xxxxxxxxxx Front v
=================================================
Try to get the forward edge of tape to roll up the groove on the forward side but not high enough to touch the glass when the case is closed.
TheFluffyOne said:
Replacement case arrived from Motorola and... it stays upright now! The problem with the first case was definitely that the rubberised strips weren't... er... rubbery enough
The 'correct' way to stand it up is as I attempted in my video; it just requires a case that's not faulty ;-)
Sent from my Android phone
Click to expand...
Click to collapse
Hello,
Could you please tell where did you buy this xoom 2 me case? Have an idea of it's sold in France too?
Thanks
Bought from Amazon.
Sent from my Android phone
Hmm I was probably going to end up getting this case but from what I have seen of it I might stay away
If your not happy...
TheFluffyOne said:
Just bought the Xoom 2 Media Edition, and whilst I'm very happy with the tablet, the portfolio case is proving to be something of a letdown. Specifically it won't stay upright in the 'film watching' position; it just slides back and falls down :-(
Anyone else have any comments about this case?
Sent from my XOOM 2 ME using xda premium
Click to expand...
Click to collapse
If you aren't happy with the case you got. I got one for my XOOM 2 10.1 that has multiple viewing angles, and it also detaches and can be rotated to multiple vertical angles.
http://secondshells.com/tablet-brands/motorola.html
---------- Post added at 03:20 PM ---------- Previous post was at 03:17 PM ----------
g2c said:
Hello,
Could you please tell where did you buy this xoom 2 me case? Have an idea of it's sold in France too?
Thanks
Click to expand...
Click to collapse
The company I bought mine from ships internationally. Check out the link above.
Today I was looking for Galaxy Nexus car mount holder on Amazon.
I came up with this car mount holder.
http://www.amazon.com/iOttie-Windsh...volution/dp/B00687N0GK/ref=zg_bs_2407763011_1
It is the best selling car mount.
http://www.amazon.com/gp/bestsellers/wireless/2407763011/ref=pd_zg_hrsr_cps_1_4_last
Is any of you tried this?
I have Galaxy Nexus GSM. I'm wondering if it fits.
I sent an email to the customer service but I'm wondering your comments
I sent email to customer service and this is the answer that i received
Dear xxx,
I have searched on google about your phone, and it says the width is 2.67 inches wide.
Our car mount's adjustable width size is from 2" to 3.2", so it won't be a problem.
Hope this information was helpful, and if you have any other question, please feel free to email us back.
Best regards,
Christina Kim
Click to expand...
Click to collapse
However, I'm considering to buy the OEM Galaxy Nexus car dock.
i used a slip grip with my cased droid x and found it worked very well.
SlipGrip Galaxy Nexus Options
That looks pretty good,I used to use a $5 belt clip from ebay on my Eris, but now they only make them facing in. Thanks for the link. A bit spendy, but the best option for a case I've seen.
Sent from my Galaxy Nexus using xda premium
You're welcome.
I checked threads about car holders and I couldn't see anything about this car holder. Even though it is the most popular one in Amazon shop, it is not popular here.
T-Keith said:
That looks pretty good,I used to use a $5 belt clip from ebay on my Eris, but now they only make them facing in. Thanks for the link. A bit spendy, but the best option for a case I've seen.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Does this car mount have a clear view when using the camera? Some car mounts you can see a bit of the mount attachment
Sent from my Galaxy Nexus using Tapatalk
I have the iOttie mount and its just decent. I have my Gnex in an otterbox defender case and it barely is wide enough to hold it..with maybe a 1/4" to spare..
My phone vibrated and fell out some. It might be more stable if I permanently mounted it to the dash instead of putting it on the windshield.
But give it a go if you want. Its dirt cheap on amazon.
Sent from my Galaxy Nexus using Tapatalk
Thanks for comment. I think I will order it.
I'm willing to buy an office car dock for GNEX GSM, but I think it is still not released?
mattbourge said:
I have the iOttie mount and its just decent. I have my Gnex in an otterbox defender case and it barely is wide enough to hold it..with maybe a 1/4" to spare..
My phone vibrated and fell out some. It might be more stable if I permanently mounted it to the dash instead of putting it on the windshield.
But give it a go if you want. Its dirt cheap on amazon.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
SNaReX said:
Today I was looking for Galaxy Nexus car mount holder on Amazon.
I came up with this car mount holder.
http://www.amazon.com/iOttie-Windsh...volution/dp/B00687N0GK/ref=zg_bs_2407763011_1
It is the best selling car mount.
http://www.amazon.com/gp/bestsellers/wireless/2407763011/ref=pd_zg_hrsr_cps_1_4_last
Is any of you tried this?
I have Galaxy Nexus GSM. I'm wondering if it fits.
I sent an email to the customer service but I'm wondering your comments
Click to expand...
Click to collapse
Similar item is avaliable at dx.com at a much cheaper price.
http://dx.com/universal-car-swivel-...sung-galaxy-nexus-i9250-galaxy-w-i9103-113496
This is what I ordered. I fabbed a charger cable to the bottom of it too.
http://www.amazon.com/Arkon-SM410-Universal-Windshield-Smartphones/dp/B003ELOOZO/ref=sr_1_1?s=wireless&ie=UTF8&qid=1330994745&sr=1-1
How did you do that?
ellisz said:
This is what I ordered. I fabbed a charger cable to the bottom of it too.
http://www.amazon.com/Arkon-SM410-Universal-Windshield-Smartphones/dp/B003ELOOZO/ref=sr_1_1?s=wireless&ie=UTF8&qid=1330994745&sr=1-1
Click to expand...
Click to collapse
Hi!
I've bought a new bumper (SPG Spigen Ultra Lumi Bumper).
Now I need a new car mount, because my old one does not fit with the bumper.
Any suggestions for new car cradle?
greets
m8980
The ibolt car dock is great. Works with or without a case. Does not work with the defender.
Sent from my SPH-L710 using Tapatalk 2
i have the arkon car mount (the one with mega grip) it fits on the garmin ball mount so it's prefect for me. amazon sells it for 13 bucks or so...
Sent from my GT-I9300 using xda app-developers app
Just got the imagnet on Amazon and I'm loving it so far. Holds great even off road and works with my uag case.
There are many choices for you here http://dx.com/s/car+mount . pls read the review before you decide which one to buy. Hope it'll help you find a suitable one.
Matt1024 said:
Just got the imagnet on Amazon and I'm loving it so far. Holds great even off road and works with my uag case.
Click to expand...
Click to collapse
Indeed, I am using this one too and very happy with that.
Imagnet is the best. Still on sale for $19.99.
iMagnet Cradle-less Magnetic Mount with Quick-snap Technology, Smartphone Car Windshield Dashboard Universal Holder
http://www.amazon.com/dp/B008IOQ3K6/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
http://www.amazon.com/Mountek-nGroove-Universal-Mount-Black/dp/B004G1L52Q
mount tek cd mount it works on some cars, no need for suction cups and half of us ditch the cd players at this point.
lcrazyaznl said:
http://www.amazon.com/Mountek-nGroove-Universal-Mount-Black/dp/B004G1L52Q
mount tek cd mount it works on some cars, no need for suction cups and half of us ditch the cd players at this point.
Click to expand...
Click to collapse
This is what I use too. Very unique design and works great.
Matt1024 said:
Just got the imagnet on Amazon and I'm loving it so far. Holds great even off road and works with my uag case.
Click to expand...
Click to collapse
How thick are the adhesive plates protruding from the case? can you post a pic?
Its about 5 sheets of copier paper. Very thin. A lot thinner than a credit card.
http://forum.xda-developers.com/showthread.php?t=1968549
I've been using the iOttie one touch mount. There's a newer one that just came out called the Easy Flex 2 but I've been using the original one called Easy One Touch. Best car mount I've used. There's a button on the dock plate that when pushed in the 2 arms grab onto the phone and it's pretty secure. To remove it just squeeze the 2 buttons on the side of the mount and the arms open up and the phone pops out.
It's not a powered dock so you have to plug in your adapter straight into the phone. Most times if my phone is fully charged I don't plug it in and it's a very clean look.
I keep an NFC sticker by the dock to turn on GPS and car mode so with this mount everything is just so quick. Check it out and let me know if you have any questions.
rebdogg said:
I've been using the iOttie one touch mount. There's a newer one that just came out called the Easy Flex 2 but I've been using the original one called Easy One Touch. Best car mount I've used. There's a button on the dock plate that when pushed in the 2 arms grab onto the phone and it's pretty secure. To remove it just squeeze the 2 buttons on the side of the mount and the arms open up and the phone pops out.
It's not a powered dock so you have to plug in your adapter straight into the phone. Most times if my phone is fully charged I don't plug it in and it's a very clean look.
I keep an NFC sticker by the dock to turn on GPS and car mode so with this mount everything is just so quick. Check it out and let me know if you have any questions.
Click to expand...
Click to collapse
I just bought this too, haven't got it yet, but it looks like a nice mount for sure.
(⊙＿⊙)
I found a cheaper version of the clingo mount http://dx.com/p/long-tube-car-stand-holder-for-iphone-samsung-htc-blackberry-black-156661 and ordered it to give it a try. Hopefully it'll be as sticky as the original and works with any case with smooth surface.
So I was watching this item for $18.99 for quite some time. I recieved a $25 Amazon Card for Christmas...to my surprise I found this case was now listed at $9..99 so I decide to get the car vent magnets as well ($6.99.)
Case
https://www.amazon.com/gp/product/B01M25X7TI/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Magnet
https://www.amazon.com/gp/product/B01M25X7TI/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
The case seems built very well. It does add some width, a little mass, but my no means does it turn the phone into a "brick" (pun intended.)It easily holds 3 cards; my license, my pistol permit, and my debit card (inside its protective sleeve...case is magnetic, just in case.) I actually like the look and feel and practicality of not needing to carry a wallet. So far, so good. I haven't driven with it magnetically attached to air vent clip so I can offer no opinion of the holding ability...some Amazon reviewers suggested purchasing a second magnets. All in all, I'd say this is a pretty good value.
I am intrigued by this case but your link for the magnet went to the information for the phone. Which magnetic vent mount did you use?
Hagbard57 said:
I am intrigued by this case but your link for the magnet went to the information for the phone. Which magnetic vent mount did you use?
Click to expand...
Click to collapse
Sorry... Here it is... Also after a full day....I really like this case!
https://www.amazon.com/Vena-Universal-Magnetic-Aluminum-Smartphones/dp/B01GW4GOUW
Sent from my LG-H918 using Tapatalk
Sweet! Thank you for the info. Just placed an order for the case and CD Slot Holder. If the CD Slot holder doesn't work I will switch to Vent case. Very interested to see how this works out.
joeygee23 said:
Sorry... Here it is... Also after a full day....I really like this case!
https://www.amazon.com/Vena-Universal-Magnetic-Aluminum-Smartphones/dp/B01GW4GOUW
Sent from my LG-H918 using Tapatalk
Click to expand...
Click to collapse
Hagbard57 said:
Sweet! Thank you for the info. Just placed an order for the case and CD Slot Holder. If the CD Slot holder doesn't work I will switch to Vent case. Very interested to see how this works out.
Click to expand...
Click to collapse
Case awesome!!... Single vent magnet held well on maiden voyage!
Sent from my LG-H918 using Tapatalk
So the magnet didn't bother your credit card magnetic strip?
Sent from my LG-H918 using Tapatalk
Pick_A_Name said:
So the magnet didn't bother your credit card magnetic strip?
Sent from my LG-H918 using Tapatalk
Click to expand...
Click to collapse
There's a rubber type lining...I kept my debit card in its paper sleeve just in case. Comment section on Amazon says no problems...
Sent from my LG-H918 using Tapatalk
Hagbard57 said:
Sweet! Thank you for the info. Just placed an order for the case and CD Slot Holder. If the CD Slot holder doesn't work I will switch to Vent case. Very interested to see how this works out.
Click to expand...
Click to collapse
Did you get yours yet?
Sent from my LG-H918 using Tapatalk
Sadly, it does not work with a Verizon branded LG V20, as there is no way to disable a so called Quick Case setting on a Verizon branded device.
inkdesigner said:
Sadly, it does not work with a Verizon branded LG V20, as there is no way to disable a so called Quick Case setting on a Verizon branded device.
Click to expand...
Click to collapse
That's too bad. I absolutely love it. Maybe you could try this one, which I'm planning to order very soon...
http://zoarah.com/matchnine-cardla-...amsung-galaxy-note-7-clone.html#/product/3236
Sent from my LG-H918 using Tapatalk
joeygee23 said:
Did you get yours yet?
Sent from my LG-H918 using Tapatalk
Click to expand...
Click to collapse
I did, I like the case but I love the CD Mount even better. Very non-obtrusive build and the magnet holds very well. I have put the including disc in my other case and I use them interchangeably.
Would definitely recommend both!
I bought the magnet, works amazing.
I used both of the metal plates that came with it because I use a case.
I have this case and I use it with a dashboard magnet mount that I found @ Marshalls. the case holds awesome over bumps and flying around in my car.
As for the case itself, Its been great so far. It makes it a little bulkier but I like it cause it makes it easier to handle. It is the best card case that I have found so far not counting any of those wallet cases.
The only thing I wish was that it was a little gripper than the material used.
It has a raised bevel so it doesnt lay flat on the screen and same with the rear camera for protection.
There are no covers for the ports except for the volume buttons.
It fits 3 cards snugly even if all 3 cards have raised numbers. The cards are easy to get out too as it has a little slope which makes it easier to slide the cards out. I usually carry drivers license and debit card while switching out the 3rd with either cash or a gift card. It's great not having to carry a wallet anymore.
Using a magnet mount in a vehicle is a lot easier than using the other kinds where you have to release the clamps or something.
I use it daily any time I'm driving and I have never had it fall off the mount although I have had the mount itself become unstuck from my dashboard but it was only twice when I didnt have it seated properly.
Can anyone recommend a good car mount?
I just bought some cheesy magnetic thing from Amazon. Will be returning ASAP. Ideally, I think I'm looking for something that can clip into either the air vents or on the dash of my car. I realized there probably aren't many pixel specific accessories made yet, but maybe someone has had good success with a different model for an earlier phone?
Anyway just wondering what you all were planning on using.
I've been using a good magnetic mount for the CD slot in my car since the Nexus 5 days. I like the Koomus brand of them from Amazon.
Sent from my Pixel 2 XL using Tapatalk
I personally been using ProClip for a while. With my Nexus 6 I have a universal one since I have a thin case it slips in. Mounts are made per vehicle too.
https://www.proclipusa.com/category/google-pixel-2
Sent from my Nexus 6 using Tapatalk
I've had the third generation iOttie car mount for about a year, and it is excellent. It doesn't have a vent clip, but its suction cup mount is very sturdy. It even comes with a little pad you can use if your dash is textured.
I second the ProClip. You can get a custom mount for your vehicle, and select a separate holder. I've got a custom mount and a universal holder that can be adjusted if you switch phones.
I second the recommendations for iOttie mounts. I bought their wireless charging one back when I got my Galaxy S6, but I still use it with my Pixels because it is incredibly convenient to secure and remove the device. Excellent quality, usability, and adjustability, well worth the purchase.
coolsilver said:
I personally been using ProClip for a while. With my Nexus 6 I have a universal one since I have a thin case it slips in. Mounts are made per vehicle too.
https://www.proclipusa.com/category/google-pixel-2
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Looks like a solid product! I have an '09 Kia Spectra and the dash doesn't look like an easy place to put a phone mount. I checked out their custom mount for my car and the only drawback I can see is it completely covers a vent (for a/c) which may or may not be an issues, I won't know until mounted but.. Any experience with that for you?
Yea on my prior vehicle I had it cover the vent. It was out far enough so it still put out air but it wasn't really directional as far as flow as before. Center ones I didn't care as much about being pointed at me to keep cool. It was a solid bracket though
coolsilver said:
Yea on my prior vehicle I had it cover the vent. It was out far enough so it still put out air but it wasn't really directional as far as flow as before. Center ones I didn't care as much about being pointed at me to keep cool. It was a solid bracket though
Click to expand...
Click to collapse
Thanks! They do look solid ...
I have an existing car mount for my S7 before I got the XL, it holds the phone in landscape and squeezes the sides. Little concerned that this may not be good for the squeeze sensors. Anyone think it could affect the sensors over time?
I have this one since May 2016 no issues and easy off and on for various phones..I have vent but they make cd slot and I think window too
iOttie
https://www.amazon.com/gp/product/B017HME9DC/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Sent using Tapatalk
Haven't used these myself, but they look pretty sweet...https://www.amazon.com/dp/B01DCSIRG0/ref=cm_sw_r_cp_awdb_KmO7zbB7T3BNE
Anybody used this one before?
Cowbell_Guy said:
Can anyone recommend a good car mount?
I just bought some cheesy magnetic thing from Amazon. Will be returning ASAP. Ideally, I think I'm looking for something that can clip into either the air vents or on the dash of my car. I realized there probably aren't many pixel specific accessories made yet, but maybe someone has had good success with a different model for an earlier phone?
Anyway just wondering what you all were planning on using.
Click to expand...
Click to collapse
Another vote for Proclip's mounting solution. The universal large holder works fine with my Pixel 2 XL with a (Caseology Parallax) case. It's pricey but it works beautifully.
I just ordered the IOAuto magnet holder to use with Proclip's mounting bracket. I'm tired of sliding my phone into the holder. 1st world problems, I know.
Sent from my Pixel 2 XL using Tapatalk
morbidhippy said:
I just ordered the iOttie magnet holder to use with Proclip's mounting bracket. I'm tired of sliding my phone into the holder.
Click to expand...
Click to collapse
How does that work exactly? Which iOttie did you buy, and how does it work with the ProClip bracket?
dberthia said:
How does that work exactly? Which iOttie did you buy, and how does it work with the ProClip bracket?
Click to expand...
Click to collapse
Oops, I meant IOAuto, not iOttie.
https://www.proclipusa.com/product/...xkJK2QwbcDyiiZdeiDsdvqZtMoM3Vg84aAjDOEALw_wcB
I bought the IOAuto Pro. It attaches to the vehicle mount that I purchased previously from Proclip. It comes with small circular metal disks that should be attached to your phone.
I hate the thought of using adhesive to stick anything on my phone so I'm going to try and place the disk between the phone and my TPU case. In think the magnet will still work fine.
Check out YouTube. I've seen a couple of videos of others installing it.
Sent from my Pixel 2 XL using Tapatalk
I like this simple magnetic holder:
Techmatte MagGrip Orbit Universal Air Vent Magnetic Car Mount Holder
It requires a thin metal plate which works fine if you use a TPU case or other case that's not too thick on the back; this way, it doesn't require any permanent application. I bought 3 for family members, and a friend got one after seeing mine. It's easy to mount, secure, very simple in design - it uses a steel ball that mounts to an air vent, and a magnetic piece that connects to the ball, giving easy adjustment in all directions, or complete removal. This magnetic piece connects to the phone's steel plate. My wife has an iphone 6P which works well; I have a nexus 5X.
coolsilver said:
I personally been using ProClip for a while. With my Nexus 6 I have a universal one since I have a thin case it slips in. Mounts are made per vehicle too.
https://www.proclipusa.com/category/google-pixel-2
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Adding a :good: for the ProClip. Mine just came yesterday and works perfect.
morbidhippy said:
I hate the thought of using adhesive to stick anything on my phone so I'm going to try and place the disk between the phone and my TPU case. In think the magnet will still work fine.
Click to expand...
Click to collapse
I'm curious to see if that works out for you. I'm intrigued, but it seems like $50 is a bit steep for that mount. If it works well for you with a case, I may consider it though.
I know my solution isn't going to be for everyone, but it works well for my needs. I have a hybrid Proclip/Ram Mount solution. Proclip for the center dash mount, then Ram Mounts for the rest (ball, short arm, and X Grip holder). It's more involved than the common solutions, but it puts my phone right whereIi want it and it's rock solid--which is important for those track days.
As mentioned upthread, this does partially block the vent, but on my Mustang not by too much, and the passenger still gets air flow when it's directed their way. A bonus is the phone stays nice & cool when staying on playing podcasts while commuting, or running the telemetry apps while on track.
I can strongly recommend this one. They're a little pricey but I have them in my truck, car, 4-wheeler and mountain bike. Just the spring clips are strong and when you add the rubber sling it'll hold on to the phone almost no matter what. This one actually fits my P2XL better than my PXL. https://www.amazon.com/gp/product/B0066BWMNU/ref=oh_aui_search_detailpage?ie=UTF8&psc=1