Develop Bugs

Looking for a windshield mount for my truck

I know there a few threads about windshield mounts but none of them have what I'm looking for. I am looking for a windshield mount for my 2000 Ram 1500. I want it to mount on the BOTTOM on the windshield and come to the edge of the dash so it will need to be fairly long. I switch between the Seidio Innocase II surface and the Seidio 3500mah extended battery so I need something that will accommodate both of those. I also need it to switch between portrait and landscape. The Kensington windshield mount for the Iphone looks like it would be great but it doesn't look like it will allow me to use my extended battery.
What have you guys found that might work for what I need?

ive been using this...
Scosche IUHW7 Windshield Vent Mount Kit.
its inexpensive it sitcks... it turns and fits all kinds of stuff

I think I got it for 12 bucks at walmart

bacidath said:
ive been using this...
Scosche IUHW7 Windshield Vent Mount Kit.
its inexpensive it sitcks... it turns and fits all kinds of stuff
Click to expand...
Click to collapse
I might have to see if my local walmart has that. Thanks.

http://www.seidioonline.com/product-p/ck17hev4c04.htm
it is not long but with a little modification it will work.
it also holds thee innocaseII and the extended battery one.
will car dock the phone

Ram Mounts are good in trucks
http://www.ram-mount.com/

Mountek MT5000
I bought this after finding a thread about it on another forum. Best accessory ever. Extremely quick and easy to install, rotates portrait/landscape ... can't complain about anything. It uses your CD slot - you just put it in the opening and clamp it down.
It's actually started to become a problem because I'm constantly distracted while driving by my cellphone now. It's just right there up in my face, gorgeous and begging to be played with.
Can't post the link since I'm new here ... but you can Google it easily.

I like the Clingo mount so much, I am going to mod the Sedio Active Innocase I have to make it work with it (smooth.velvty doesn't stick to Clingo).

sanyi83 said:
Ram Mounts are good in trucks
http://www.ram-mount.com/
Click to expand...
Click to collapse
I've used Ram Mounts in my Jeep, good stuff!
Sent from my Desire HD using XDA App

I've got a cheap Arkon universal mount I use in my car. Works great with my ballistics case or naked.
Dunno how long it is but I have am ikd z car and its mounted to the bottom of my windshield and comes to the dash edge. Probably 6in or more. It was tricky too cause my car has a high rake angle and I wanted it mounted so it wouldn't show Tue mount at all in videos. It does block half the camera but it clamps hard enough that you can scoot it up and get the camera free.
Sent from my (insert daily ROM name here) Evo 4g

When in its case, mine fits in my Garmin windshield mount
Sent from my PC36100 using XDA App

Why not just get the seidio innotraveler? It will fit both the extended battery and innocase power their website. I have it and love it, it actually extends pretty far.
Sent from my hand with XDA Premium installed

Because the seidio one is $50! Thats crazy for a windshield mount. I found one at bestbuy yesterday its by rocketfish and made for the iphone but it works with our phone to. It doesn't come to the edge of the dash but it will work.

ARKON Car Mount for SGS3 - I like it

Hi guys, I just picked up the ARKON SM515 mount for my GS3 and I love it. I think it was $16 on amazon. (link to their site http://www.arkon.com/Galaxy S III/slimgrip-galaxy-s-3-mini-windshield-car-mount.html ) They also have one called the AP515 which is for the iphone and its a few bucks cheaper but I just don't know if the GS3 will fit. The SM514 is similar to the 515 but it's a tiny bit bigger due to the adjustable arm (another great one to consider if you have the room for it) Anyway I mounted in a weird spot near my radio on the center of the dashboard. It can swivel in almost any direction which is cool and it's holding on tight. You can adjust the feet that hold the phone and they have rubber padding that way they won't scratch anything. I mounted mine using the included dashboard sticky pad. Here's a few pics taken with my bionic. (not the best camera)
p.s. In case any of you are wonder i'm using the Fosmon TPU + clear back case from amazon. It's around 6 bucks.

Deffinately thinking I'll order one. Been wanting a good mount for my car witht he new phone.

Arkon makes some FANTASTIC products - glad to know they didn't skimp out on the S3.

I bought the bad boy.
http://www.arkon.com/Galaxy S III/slimgrip-galaxy-s-3-car-floor-mount.html
I hate using AC and window mounts. This can sit right in between my e-brake and driver seat.

That's the exact mount I have in my car. I originally bought it for my Nook Color, but it also fits the S3 perfectly. Nice strong hold.
Sent from my SGH-T999 using Tapatalk 2

How removable is the dashboard sticky pad? Would it leave behind any gunk when taking it off? And how easy is it to take off/put on. Thanks.

Tryptonite said:
How removable is the dashboard sticky pad? Would it leave behind any gunk when taking it off? And how easy is it to take off/put on. Thanks.
Click to expand...
Click to collapse
Taking the phone off the mount is pretty easy but this thing does hold it pretty firmly in place. I don't know how easy The 3M sticky pad will come off as it feels pretty solid on there. In my case my dash is plastic so it should come off pretty easily (but not too easy I hope) . You may want to contact their customer service and see what they say about it

sebastianraven said:
I bought the bad boy.
http://www.arkon.com/Galaxy S III/slimgrip-galaxy-s-3-car-floor-mount.html
I hate using AC and window mounts. This can sit right in between my e-brake and driver seat.
Click to expand...
Click to collapse
That looks awesome.

Check out Mountek CD slot mount.
http://www.amazon.com/gp/aw/d/B004E5W3D4/ref=mp_s_a_1?qid=1342158086&sr=8-1
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Paging Dr B said:
Hi guys, I just picked up the ARKON SM515 mount for my GS3 and I love it. I think it was $16 on amazon. (link to their site http://www.arkon.com/Galaxy S III/slimgrip-galaxy-s-3-mini-windshield-car-mount.html ) They also have one called the AP515 which is for the iphone and its a few bucks cheaper but I just don't know if the GS3 will fit. The SM514 is similar to the 515 but it's a tiny bit bigger due to the adjustable arm (another great one to consider if you have the room for it) Anyway I mounted in a weird spot near my radio on the center of the dashboard. It can swivel in almost any direction which is cool and it's holding on tight. You can adjust the feet that hold the phone and they have rubber padding that way they won't scratch anything. I mounted mine using the included dashboard sticky pad. Here's a few pics taken with my bionic. (not the best camera)
p.s. In case any of you are wonder i'm using the Fosmon TPU + clear back case from amazon. It's around 6 bucks.
Click to expand...
Click to collapse
thanks for this. i've been looking for a good vehicle mount for a while

Im looking for something like this but with shorter neck.

For you guys that don't like windshield mounts, I've used the "sticky" Arkon mount. It works pretty well. I like the Mobile Grip, but if you use a big case like an otterbox, you'll probably be better off with the slim-grip, that thing will hold anything.
Mobile Grip: http://www.arkon.com/Galaxy S III/mobile-grip-galaxy-s-3-car-mount.html
Slim-Grip: http://www.arkon.com/Galaxy S III/slimgrip-galaxy-s-3-car-mount.html

sebastianraven said:
I bought the bad boy.
http://www.arkon.com/Galaxy S III/slimgrip-galaxy-s-3-car-floor-mount.html
I hate using AC and window mounts. This can sit right in between my e-brake and driver seat.
Click to expand...
Click to collapse
Looks interesting. Can you put up pictures/video when you get it installed? I'm wondering whether its long enough that you don't have to look down from the road too much to see the screen.

Shady Gambino said:
For you guys that don't like windshield mounts, I've used the "sticky" Arkon mount. It works pretty well. I like the Mobile Grip, but if you use a big case like an otterbox, you'll probably be better off with the slim-grip, that thing will hold anything.
Mobile Grip: http://www.arkon.com/Galaxy S III/mobile-grip-galaxy-s-3-car-mount.html
Slim-Grip: http://www.arkon.com/Galaxy S III/slimgrip-galaxy-s-3-car-mount.html
Click to expand...
Click to collapse
Yeah, their sticky mount is awesome!!! I just recently reviewed their Slim Grip Ultra with stick mount here on XDA: http://forum.xda-developers.com/showthread.php?t=2174449 - that mount works with ANY phone up to Note 2/Note 3 size and even 7"/8" tablets. Definitely recommend it.

go
good

Suggestions for a Phone Mount?

Good evening!
I'm in need of some suggestions.
I'd like to get a mount to put my phone in but I'm kind of out of ideas..
Here's where I'm at:
-I don't want a window mount. I've had one fall off and explode my phone before.
-I don't have a CD player so I can't use a CD slot mount.
-A cup holder mount wouldn't work well in a 04 Aveo's cup holder.
-A lighter mount wouldn't work because the cup holder is on top of it.
Otherwise, I have no idea where to mount my phone!
Any ideas/suggestions?

I bought a Kenu Airframe for my current phone (iPhone 5. Waiting for my OPO!). It's a mount that goes onto your air vent. The phone doesn't slip or move at all. I got it on sale. There's an Airframe+ for 5.5 inch screens. I haven't tried the Airframe+, but I suspect it works the same.

Can you let me know if the OPO fits in the original Airframe? People were reporting it working with a Galaxy S4 with a case so it might be close. The vents in my car are vertical, though, so I wonder if it would slip off...

strra said:
Can you let me know if the OPO fits in the original Airframe? People were reporting it working with a Galaxy S4 with a case so it might be close. The vents in my car are vertical, though, so I wonder if it would slip off...
Click to expand...
Click to collapse
Can confirm, the OPO fits in the original Airframe. Using it with mine, works great.
You can rotate the rubber teeth 360º so it can be used with any vent setup (vertical/horizontal/rotating vents)
EDIT: thread from the Oneplus Forum. https://forums.oneplus.net/threads/good-news-the-opo-is-fitting-in-the-kenu-airframe.26126/

randaddy said:
Can confirm, the OPO fits in the original Airframe. Using it with mine, works great.
You can rotate the rubber teeth 360º so it can be used with any vent setup (vertical/horizontal/rotating vents)
EDIT: thread from the Oneplus Forum. https://forums.oneplus.net/threads/good-news-the-opo-is-fitting-in-the-kenu-airframe.26126/
Click to expand...
Click to collapse
perfect. i'm going to see if i can find something about how it performs on vertical vents and that'll probably be the one i end up getting. Thank you!

OP have you looked at ProClip?
https://www.proclipusa.com/

mbudden said:
OP have you looked at ProClip?
https://www.proclipusa.com/
Click to expand...
Click to collapse
I have but when all is said and done, having to buy a clip then a mount, it seems to be restrictively expensive....

I got my OPO today. Here's some pictures of it in the mount. It cannot fit in the mount with a case on. I tried it with the Diztronic.

strra said:
I have but when all is said and done, having to buy a clip then a mount, it seems to be restrictively expensive....
Click to expand...
Click to collapse
I thought this also, but with my HTC One, and now my OPO I wouldn't go anywhere else but Brodit Proclips...they are perfect.
OPO has to use a universal clip, but even that fits than 2-3 other ones I've tried for the OPO.
If you have the cash, give it a go.

randaddy said:
Can confirm, the OPO fits in the original Airframe. Using it with mine, works great.
You can rotate the rubber teeth 360º so it can be used with any vent setup (vertical/horizontal/rotating vents)
EDIT: thread from the Oneplus Forum. https://forums.oneplus.net/threads/good-news-the-opo-is-fitting-in-the-kenu-airframe.26126/
Click to expand...
Click to collapse
foodgud said:
I got my OPO today. Here's some pictures of it in the mount. It cannot fit in the mount with a case on. I tried it with the Diztronic.
Click to expand...
Click to collapse
I've emailed their support and they said they're pretty sure that it'll work fine on my car and that if it doesn't, I can return it for a full refund.
This may be the way to go.
Thank you guys!

foodgud said:
I bought a Kenu Airframe for my current phone (iPhone 5. Waiting for my OPO!). It's a mount that goes onto your air vent. The phone doesn't slip or move at all. I got it on sale. There's an Airframe+ for 5.5 inch screens. I haven't tried the Airframe+, but I suspect it works the same.
Click to expand...
Click to collapse
foodgud said:
I got my OPO today. Here's some pictures of it in the mount. It cannot fit in the mount with a case on. I tried it with the Diztronic.
Click to expand...
Click to collapse
randaddy said:
Can confirm, the OPO fits in the original Airframe. Using it with mine, works great.
You can rotate the rubber teeth 360º so it can be used with any vent setup (vertical/horizontal/rotating vents)
EDIT: thread from the Oneplus Forum. https://forums.oneplus.net/threads/good-news-the-opo-is-fitting-in-the-kenu-airframe.26126/
Click to expand...
Click to collapse
I got my Airframe the other day and can confirm that it works just fine with the OPO and my vertical vents.
I have to make sure the direction of the vent is all the way up or it pushes the vent fin out of alignment (requiring me to take the dash apart to fix it!)
It's a little wobbly for my taste but it's better than the phone sitting on the seat next to me!
Thank you guys for the suggestion.

foodgud said:
I bought a Kenu Airframe for my current phone (iPhone 5. Waiting for my OPO!). It's a mount that goes onto your air vent. The phone doesn't slip or move at all. I got it on sale. There's an Airframe+ for 5.5 inch screens. I haven't tried the Airframe+, but I suspect it works the same.
Click to expand...
Click to collapse
strra said:
Can you let me know if the OPO fits in the original Airframe? People were reporting it working with a Galaxy S4 with a case so it might be close. The vents in my car are vertical, though, so I wonder if it would slip off...
Click to expand...
Click to collapse
randaddy said:
Can confirm, the OPO fits in the original Airframe. Using it with mine, works great.
You can rotate the rubber teeth 360º so it can be used with any vent setup (vertical/horizontal/rotating vents)
EDIT: thread from the Oneplus Forum. https://forums.oneplus.net/threads/good-news-the-opo-is-fitting-in-the-kenu-airframe.26126/
Click to expand...
Click to collapse
I have a kenu Airframe and the opo fits fine without a case. It does not fit with case.
I've just ordered the Airframe+ to compensate. I'm a huge fan of the Kenu and would highly recommend it to anyone.

atoy74 said:
I have a kenu Airframe and the opo fits fine without a case. It does not fit with case.
I've just ordered the Airframe+ to compensate. I'm a huge fan of the Kenu and would highly recommend it to anyone.
Click to expand...
Click to collapse
yeah, it is a VERY tight fit without a case

I bought the TYTL Capio. http://www.tylt.com/capio-nfc/
love it

Has anyone found a car mount/dock that has a built in charger and/or audio out? It's kind of a pain to have to hook up the charge cord and audio cord every time I want to put the phone in my car mount. My old Samsung G2 mount was like that. Just plug your charge cord into the mount, as well as your audio cord, then when you slipped the phone in the cradle, it would slide into the usb, start charging and have an audio out signal.

used an airframe for my nexus 5, i didnt like it, due to how it was positioned in my honda civic. it was always diagonal facing away from me.
i guess it depends on the car u have. ima try iOttie

SANOXY® Universal Car Mount Phone Holder/ 360 degree rotation Cube ... http://www.amazon.com/dp/B00GQIV62Q/ref=cm_sw_r_udp_awd_WC-.tb08CJ2XB
Best one I've had in yrs
Tried so many and this is the best one .
Sent from One Unique Phone & Its Mine.

oranium said:
SANOXY® Universal Car Mount Phone Holder/ 360 degree rotation Cube ... http://www.amazon.com/dp/B00GQIV62Q/ref=cm_sw_r_udp_awd_WC-.tb08CJ2XB
Best one I've had in yrs
Tried so many and this is the best one .
Sent from One Unique Phone & Its Mine.
Click to expand...
Click to collapse
Hey, question for ya

ghettopops said:
Hey, question for ya
Click to expand...
Click to collapse
What's up ?
Sent from One Unique Phone & Its Mine.

OnePlus One in car holder.

Would you guys share what holders and chargers do you use in your cars?
I am looking for something decent.
Thanks
Sent from my A0001 using XDA Free mobile app

I use the Keno+ for Phablets. I drive a 2013 Honda civic and it plugs right into the vent to the right of the steering wheel. It works great, never fallen out, easy to adjust. I'd definitely recommend this one. Kenu Airframe+ Car Mount for Phablets.

I recently picked up a Scosche MagicMount at Walmart. The price was decent and I was pleasantly surprised at how well it holds the phone in place. The steel plate fits inside my case, and the phone doesn't move when attached to the mount.
After using it a bit I decided the mount location was too low for my taste, so I just ordered this version to move it up higher and make it adjustable. I don't have the new one yet, so no pics, but if it works like the flat version I'll be happy.

I use this GreatShield mount:
http://www.amazon.com/gp/product/B00KVJAZVY?psc=1&redirect=true&ref_=oh_aui_detailpage_o09_s00
It's solid and holds the phone still, so I can't complain.

I use this one:
http://www.ebay.com/itm/151657398154
It is dirt cheap and actually nice quality. The suction thingy sticks to any surface.

iottie, i've never had a mount with this type of suction cup, it's crazy how well it grabs.

I use the Gripgo on my OPO with a Diztronic TPU case in my 2006 Honda civic
Sent from my A0001 using Tapatalk

I'm using this steering wheel clip:
http://www.ebay.co.uk/itm/251719151...49&var=550644989663&ssPageName=STRK:MEBIDX:IT
but this air vent mount is also good:
http://www.ebay.co.uk/itm/281693722904?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Why do I gave both? One for a vertical view and one for horizontal. They both hold and support the oneplus one.

The best option for this is with no doubt like this
http://www.aliexpress.com/item/Univ...-Stand-Holder-For-iPhone-HTC/32297935591.html
Wonderful, i bought about ten for my friends and me.

liver20 said:
The best option for this is with no doubt like this
http://www.aliexpress.com/item/Univ...-Stand-Holder-For-iPhone-HTC/32297935591.html
Wonderful, i bought about ten for my friends and me.
Click to expand...
Click to collapse
I'll vouch for these too. I even use 2 to hold my iPad mini on my dash. Although I bought them from ebay, more expensive at 2 for £5GBP, but you get them in 3 days rather than the estimated 30-60 days from aliexpress.
See pic

I use this iOtie holder and it is perfect. The gel pad sticks without any issue and I'm not worried about it falling off on these crappy Dallas roads.

Car Mount recommendation?

Can anyone recommend a good car mount?
I just bought some cheesy magnetic thing from Amazon. Will be returning ASAP. Ideally, I think I'm looking for something that can clip into either the air vents or on the dash of my car. I realized there probably aren't many pixel specific accessories made yet, but maybe someone has had good success with a different model for an earlier phone?
Anyway just wondering what you all were planning on using.

I've been using a good magnetic mount for the CD slot in my car since the Nexus 5 days. I like the Koomus brand of them from Amazon.
Sent from my Pixel 2 XL using Tapatalk

I personally been using ProClip for a while. With my Nexus 6 I have a universal one since I have a thin case it slips in. Mounts are made per vehicle too.
https://www.proclipusa.com/category/google-pixel-2
Sent from my Nexus 6 using Tapatalk

I've had the third generation iOttie car mount for about a year, and it is excellent. It doesn't have a vent clip, but its suction cup mount is very sturdy. It even comes with a little pad you can use if your dash is textured.

I second the ProClip. You can get a custom mount for your vehicle, and select a separate holder. I've got a custom mount and a universal holder that can be adjusted if you switch phones.

I second the recommendations for iOttie mounts. I bought their wireless charging one back when I got my Galaxy S6, but I still use it with my Pixels because it is incredibly convenient to secure and remove the device. Excellent quality, usability, and adjustability, well worth the purchase.

coolsilver said:
I personally been using ProClip for a while. With my Nexus 6 I have a universal one since I have a thin case it slips in. Mounts are made per vehicle too.
https://www.proclipusa.com/category/google-pixel-2
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Looks like a solid product! I have an '09 Kia Spectra and the dash doesn't look like an easy place to put a phone mount. I checked out their custom mount for my car and the only drawback I can see is it completely covers a vent (for a/c) which may or may not be an issues, I won't know until mounted but.. Any experience with that for you?

Yea on my prior vehicle I had it cover the vent. It was out far enough so it still put out air but it wasn't really directional as far as flow as before. Center ones I didn't care as much about being pointed at me to keep cool. It was a solid bracket though

coolsilver said:
Yea on my prior vehicle I had it cover the vent. It was out far enough so it still put out air but it wasn't really directional as far as flow as before. Center ones I didn't care as much about being pointed at me to keep cool. It was a solid bracket though
Click to expand...
Click to collapse
Thanks! They do look solid ...

I have an existing car mount for my S7 before I got the XL, it holds the phone in landscape and squeezes the sides. Little concerned that this may not be good for the squeeze sensors. Anyone think it could affect the sensors over time?

I have this one since May 2016 no issues and easy off and on for various phones..I have vent but they make cd slot and I think window too
iOttie
https://www.amazon.com/gp/product/B017HME9DC/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Sent using Tapatalk

Haven't used these myself, but they look pretty sweet...https://www.amazon.com/dp/B01DCSIRG0/ref=cm_sw_r_cp_awdb_KmO7zbB7T3BNE
Anybody used this one before?

Cowbell_Guy said:
Can anyone recommend a good car mount?
I just bought some cheesy magnetic thing from Amazon. Will be returning ASAP. Ideally, I think I'm looking for something that can clip into either the air vents or on the dash of my car. I realized there probably aren't many pixel specific accessories made yet, but maybe someone has had good success with a different model for an earlier phone?
Anyway just wondering what you all were planning on using.
Click to expand...
Click to collapse
Another vote for Proclip's mounting solution. The universal large holder works fine with my Pixel 2 XL with a (Caseology Parallax) case. It's pricey but it works beautifully.
I just ordered the IOAuto magnet holder to use with Proclip's mounting bracket. I'm tired of sliding my phone into the holder. 1st world problems, I know.
Sent from my Pixel 2 XL using Tapatalk

morbidhippy said:
I just ordered the iOttie magnet holder to use with Proclip's mounting bracket. I'm tired of sliding my phone into the holder.
Click to expand...
Click to collapse
How does that work exactly? Which iOttie did you buy, and how does it work with the ProClip bracket?

dberthia said:
How does that work exactly? Which iOttie did you buy, and how does it work with the ProClip bracket?
Click to expand...
Click to collapse
Oops, I meant IOAuto, not iOttie.
https://www.proclipusa.com/product/...xkJK2QwbcDyiiZdeiDsdvqZtMoM3Vg84aAjDOEALw_wcB
I bought the IOAuto Pro. It attaches to the vehicle mount that I purchased previously from Proclip. It comes with small circular metal disks that should be attached to your phone.
I hate the thought of using adhesive to stick anything on my phone so I'm going to try and place the disk between the phone and my TPU case. In think the magnet will still work fine.
Check out YouTube. I've seen a couple of videos of others installing it.
Sent from my Pixel 2 XL using Tapatalk

I like this simple magnetic holder:
Techmatte MagGrip Orbit Universal Air Vent Magnetic Car Mount Holder
It requires a thin metal plate which works fine if you use a TPU case or other case that's not too thick on the back; this way, it doesn't require any permanent application. I bought 3 for family members, and a friend got one after seeing mine. It's easy to mount, secure, very simple in design - it uses a steel ball that mounts to an air vent, and a magnetic piece that connects to the ball, giving easy adjustment in all directions, or complete removal. This magnetic piece connects to the phone's steel plate. My wife has an iphone 6P which works well; I have a nexus 5X.

coolsilver said:
I personally been using ProClip for a while. With my Nexus 6 I have a universal one since I have a thin case it slips in. Mounts are made per vehicle too.
https://www.proclipusa.com/category/google-pixel-2
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Adding a :good: for the ProClip. Mine just came yesterday and works perfect.

morbidhippy said:
I hate the thought of using adhesive to stick anything on my phone so I'm going to try and place the disk between the phone and my TPU case. In think the magnet will still work fine.
Click to expand...
Click to collapse
I'm curious to see if that works out for you. I'm intrigued, but it seems like $50 is a bit steep for that mount. If it works well for you with a case, I may consider it though.

I know my solution isn't going to be for everyone, but it works well for my needs. I have a hybrid Proclip/Ram Mount solution. Proclip for the center dash mount, then Ram Mounts for the rest (ball, short arm, and X Grip holder). It's more involved than the common solutions, but it puts my phone right whereIi want it and it's rock solid--which is important for those track days.
As mentioned upthread, this does partially block the vent, but on my Mustang not by too much, and the passenger still gets air flow when it's directed their way. A bonus is the phone stays nice & cool when staying on playing podcasts while commuting, or running the telemetry apps while on track.

I can strongly recommend this one. They're a little pricey but I have them in my truck, car, 4-wheeler and mountain bike. Just the spring clips are strong and when you add the rubber sling it'll hold on to the phone almost no matter what. This one actually fits my P2XL better than my PXL. https://www.amazon.com/gp/product/B0066BWMNU/ref=oh_aui_search_detailpage?ie=UTF8&psc=1