Hello,
I'm not sure if this is related to the GPS issue or the recent update, but my Chrome Browser stopped working. Every time I launch it it crashes within a few seconds without any FC dialogue.
My GPS works fine so I don't understand what's going on.
Has this been reported?
I'd try wiping cache and data for Chrome. I don't have this issue, and I haven't seen it reported by anyone else.
Sent from my SCH-I545 using Tapatalk 4
SonicJoe said:
I'd try wiping cache and data for Chrome. I don't have this issue, and I haven't seen it reported by anyone else.
Sent from my SCH-I545 using Tapatalk 4
Click to expand...
Click to collapse
Tried everything, still no go...
Here's some info:
Code:
Stock JSS15Q
Rooted
Bootloader Unlocked
Xposed Framework
Deeco7 said:
Tried everything, still no go...
Here's some info:
Code:
Stock JSS15Q
Rooted
Bootloader Unlocked
Xposed Framework
Click to expand...
Click to collapse
Yeah I have a similar set up on 15J, my Chrome does crash very frequently on certain pages. I noticed in CatLog it has something to do with Java. I suspect (although cannot confirm yet) it's related to Xposed Framework as it happened after I got it running on my device (or a module installed with Xposed).
For a temporary work-around I've been using Dolphin Browser with minimal usage issues.
TheAltruistic said:
Yeah I have a similar set up on 15J, my Chrome does crash very frequently on certain pages. I noticed in CatLog it has something to do with Java. I suspect (although cannot confirm yet) it's related to Xposed Framework as it happened after I got it running on my device (or a module installed with Xposed).
For a temporary work-around I've been using Dolphin Browser with minimal usage issues.
Click to expand...
Click to collapse
Thanks for your reply. Great to hear it not stock issue rather a modification.
Hopefully, Xposed Framework gets updated soon, but I'm wondering why my N4 is not affected of that is case.
Sent from my Nexus 4
Maybe it's just something we have with our tablets. I wouldn't immediately point fingers at Xposed but that was just a correlation for me. I've just been too lazy to make a Nandroid backup, uninstall and completely remove Xposed and all of the modules, just to figure out if it was Xposed.
I would test it out before you say this is the plausible cause.
However, I find that my issue may be related to XPrivacy more, but I need to test it some more to confirm
TheAltruistic said:
Maybe it's just something we have with our tablets. I wouldn't immediately point fingers at Xposed but that was just a correlation for me. I've just been too lazy to make a Nandroid backup, uninstall and completely remove Xposed and all of the modules, just to figure out if it was Xposed.
I would test it out before you say this is the plausible cause.
However, I find that my issue may be related to XPrivacy more, but I need to test it some more to confirm
Click to expand...
Click to collapse
I can confirm myself Xposed was the culprit. I was using version 2.1.4 and had upgraded to the latest '2.2' which had many bug fixes and updated 'XposedBridge.jar'.
Many thanks again.
Related
Anyone found one that works well after the update? No ads on my phone (rom'd Note2) apps but they are all over the place on the 7!
AdAway works for me, works via the hosts file so it blocks ads everywhere
AlderCass said:
AdAway works for me, works via the hosts file so it blocks ads everywhere
Click to expand...
Click to collapse
Same for me.
Yea I tried AdAway and it was wonky for me. Maybe bad download? Where did you guys get it? Thanks!
tgyberg said:
Yea I tried AdAway and it was wonky for me. Maybe bad download? Where did you guys get it? Thanks!
Click to expand...
Click to collapse
Try, making sure your SuperSU binary is up to date then clear the adaway's data in settings. Launch the app and download and apply the host file. I had to do this step a couple of times but once it updated without stopping/crashing everything has been working.
Sent from my Nexus 7 using Tapatalk 4
I noticed if the screen goes off while AdAway is updating the hosts file, it'll hang and the only way to get it up and running again is force stopping and clearing the app's data, but keep the screen on and you should be okay
buckeye_jeff said:
Try, making sure your SuperSU binary is up to date then clear the adaway's data in settings. Launch the app and download and apply the host file. I had to do this step a couple of times but once it updated without stopping/crashing everything has been working.
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
Worked! Took a couple of tries for me as well. Thanks :good:
tgyberg said:
Anyone found one that works well after the update? No ads on my phone (rom'd Note2) apps but they are all over the place on the 7!
Click to expand...
Click to collapse
Both Adblock Plus and AdAway are working fine for me - I use both, since they use entirely different methods of blocking ads. They never conflict for me, and whatever tiny loss of efficiency exists is a terrific trade for NEVER seeing an ad, anywhere.....ever.
They survived a non-OTA 4.4 upgrade and re-rooting for me. I lost wifi manager and the Xposed framework, but nothing else.
Nexus 7 2013 wifi stock rom, rooted, twrp, SuperSU, etc.
Is it in the play store?
tgyberg said:
Anyone found one that works well after the update? No ads on my phone (rom'd Note2) apps but they are all over the place on the 7!
Click to expand...
Click to collapse
I used to see it on my phone but not on my nexus 7
adaway and adblock plus run perfectly on mine.
I've had my g3 since it was released for pre-order. The past two days the device has been running really slow, everything I do it seems there's a second or two delay especially with text input, its just stock rooted with xposed and greenify, titanium used to freeze all the bloat but that was day 1, just yesterday I was messaging someone on Facebook and there was a delay in typing a message, haven't added many apps on the device either, also my phone doesn't get hot and I don't leave my brightness no more than 40%, usually at auto 0%, I really don't want to factory reset but I might have to seeing its to slow to use yet there isn't really much running on the device. Any help would be appreciated thanks
Also in dev options animations are turned off
mine was running like that when using the chainfire supersu app, i was also getting bad battery life due to a wakelock related to it. i switched to the chainsdd app and now the phone is super smooth and the battery life is greatly improved.
ymmv
adiliyo said:
mine was running like that when using the chainfire supersu app, i was also getting bad battery life due to a wakelock related to it. i switched to the chainsdd app and now the phone is super smooth and the battery life is greatly improved.
ymmv
Click to expand...
Click to collapse
I also got a parsing error when trying to install g3 tweaks box if it means anything, might try a factory reset or an exchange, thankfully I have a nexus 7 2013 but it's a piece due to the plagued random reboot problem
socalforlife said:
I also got a parsing error when trying to install g3 tweaks box if it means anything, might try a factory reset or an exchange, thankfully I have a nexus 7 2013 but it's a piece due to the plagued random reboot problem
Click to expand...
Click to collapse
that's odd, tweaks box installed without a hitch for me.
what method did you use to root?
adiliyo said:
that's odd, tweaks box installed without a hitch for me.
what method did you use to root?
Click to expand...
Click to collapse
It was the ioroot I believe
socalforlife said:
It was the ioroot I believe
Click to expand...
Click to collapse
i used towel root for what it's worth. also, if you installed anything around when it started to bog down, maybe uninstall recent apps and see if that helps
adiliyo said:
i used towel root for what it's worth. also, if you installed anything around when it started to bog down, maybe uninstall recent apps and see if that helps
Click to expand...
Click to collapse
Parsing error was trying to install tweaksbox 1.1 beta btw, so I ran antutu and got 32k
socalforlife said:
Parsing error was trying to install tweaksbox 1.1 beta btw, so I ran antutu and got 32k
Click to expand...
Click to collapse
i'm on the 1.1 beta, installed fine. i haven't used a benchmarking app in a long time, but that's a pretty normal number from what other reviewers have gotten on this phone
adiliyo said:
i'm on the 1.1 beta, installed fine. i haven't used a benchmarking app in a long time, but that's a pretty normal number from what other reviewers have gotten on this phone
Click to expand...
Click to collapse
Off-topic does your nexus 7 do random reboots?
socalforlife said:
Off-topic does your nexus 7 do random reboots?
Click to expand...
Click to collapse
no, it's been really stable since i got it. it's on the L preview right now and is running like a champ. had it on PA before that
Has anyone run across issues with the MobileIron SecureApps module not being found after previously working just fine on the most recent OxygenOS Beta 13?
Yes, Mine is constantly losing configs, saying its not registered but works again when a force check in is done.
You know how your work has the config set up? I just finished deploying for our work environment using android enterprise and it is working flawlessly with exception of a few add-on launchers. I run several different ROMs and it works on all of them.
Sent from my ONEPLUS 3 using Tapatalk
noobtoob said:
You know how your work has the config set up? I just finished deploying for our work environment using android enterprise and it is working flawlessly with exception of a few add-on launchers. I run several different ROMs and it works on all of them.
Click to expand...
Click to collapse
I am not sure. Now that I am on OOS Beta 19 it only seems to happen much less frequently. I have found you can just go to the Secure Apps app, it will prompt you for your password, and that this is enough to get the other apps (Mail, Calendar, etc) to see the Secure Apps and allow login. My Help desk raised a ticket with MobileIron, who acknowledge that they are aware of the issue. Now that I know I can get access restored by logging into Secure Apps module, it is not a headache anymore.
Why do you use such piece of software on rooted devices?
romskii said:
Why do you use such piece of software on rooted devices?
Click to expand...
Click to collapse
I am not rooted. That is what the Secure App module checks.
ariesgodofwar said:
I am not sure. Now that I am on OOS Beta 19 it only seems to happen much less frequently. I have found you can just go to the Secure Apps app, it will prompt you for your password, and that this is enough to get the other apps (Mail, Calendar, etc) to see the Secure Apps and allow login. My Help desk raised a ticket with MobileIron, who acknowledge that they are aware of the issue. Now that I know I can get access restored by logging into Secure Apps module, it is not a headache anymore.
Click to expand...
Click to collapse
So, mobile iron fixed this issue, I was reading through their android corner the other day. Should've posted the content here for you. When I get back to work tomorrow on Monday, I'll try and remember to post the fix.
It's pretty simple, just have to enable secureapps at startup, but can't remember where to do this.
Sent from my ONEPLUS 3 using Tapatalk
noobtoob said:
So, mobile iron fixed this issue, I was reading through their android corner the other day. Should've posted the content here for you. When I get back to work tomorrow on Monday, I'll try and remember to post the fix.
It's pretty simple, just have to enable secureapps at startup, but can't remember where to do this.
Sent from my ONEPLUS 3 using Tapatalk
Click to expand...
Click to collapse
Yes, please do. Thanks!
Fix?
ariesgodofwar said:
Yes, please do. Thanks!
Click to expand...
Click to collapse
From the Mobile Iron Support site:
Work Around
Enable Secure App Manager in App Auto-Launch.
On the One Plus device go to Settings > Apps
Click on Settings
Settings > Apps
Scroll down and click on App auto-launch
App auto-launch
Enable Secure App Manager
Enable Secure App Manager
Since I'm running AOSP, I'm not really running into any issues. I'm also using my device as a BYOD, but hopefully this helps.
I'm trying to install the [email protected] app on my device OnePlus 3 which is running on Oxygen OS 5 (Android 8.0.0), I'm getting similar error message. With Oxygen OS 5 there is no option to Enable Secure App Manager or modify App Auto Launch settings. What is the work around? Please help.
Suri
suri091 said:
I'm trying to install the [email protected] app on my device OnePlus 3 which is running on Oxygen OS 5 (Android 8.0.0), I'm getting similar error message. With Oxygen OS 5 there is no option to Enable Secure App Manager or modify App Auto Launch settings. What is the work around? Please help.
Suri
Click to expand...
Click to collapse
I checked the mobile iron forums and have not seen a work around for Oreo. Strange however, I have it installed and everything is running fine. Are you using the device in a BYOD environment or in a corporate owned state?
A lot of [email protected] has to do with the way it is set up (phone to server), so without knowing all of this information, I can't necessarily recommend any fixes.
Can you throw up some app settings and screen shots by chance? Please blur out any information before hand that is no one else should know.
Sent from my ONEPLUS A3000 using Tapatalk
I'm on android oreo, it's been months i'm using xposed on it when in comes out on Jan but this days I have this problem where while I'm typing on facebook messenger, can you guys help?
Im having the same problem, the moment I open any conversation, messenger closes/crash
Sent from my ONEPLUS A5010 using Tapatalk
Graddy01 said:
Im having the same problem, the moment I open any conversation, messenger closes/crash
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
Same here, I have to use messenger version 189 to not make it crash. 190+ you have to disable Xposed to enter a chat without the app crashing.
Good for you. Do you have the new messenger UI?
ChanceGPM said:
Good for you. Do you have the new messenger UI?
Click to expand...
Click to collapse
Nope, and I could care less about the new ui tbh, it's just an app.
agraceful said:
Nope, and I could care less about the new ui tbh, it's just an app.
Click to expand...
Click to collapse
Probably that's why it works for you then. It will stop working for you too probably when you get the new UI. And that seems to be random when users get it
ChanceGPM said:
Probably that's why it works for you then. It will stop working for you too probably when you get the new UI. And that seems to be random when users get it
Click to expand...
Click to collapse
They've already started pulling the new ui because of bugs, but again this has NOTHING to do with Xposed. Unless you're dumb enough to use that module for messenger, then again it's still not Xposed it's the horribly programmed module. I'll end this thread, any of you willing to post a log showing Xposed is crashing messenger, I'll fix it.
I don't use any module. It just crashes for me if I use a newer version than 189. If I disable xposed, messenger works again. It's just not me having this problem: https://www.google.se/amp/s/amp.reddit.com/r/xposed/comments/9lj66j/help_xposed_crashes_messenger/
It's true. Newer messenger versions tend to crash on devices with xposed (regardless what modules are used).
I was not able to even capture a log of such crashes, which is very weird.
loketa said:
I'm on android oreo, it's been months i'm using xposed on it when in comes out on Jan but this days I have this problem where while I'm typing on facebook messenger, can you guys help?
Click to expand...
Click to collapse
try to clear data
C3C076 said:
It's true. Newer messenger versions tend to crash on devices with xposed (regardless what modules are used).
I was not able to even capture a log of such crashes, which is very weird.
Click to expand...
Click to collapse
Grab Syslog from Play Google and drop the captured logs here so that it can be fixed. No logs no help
joluke said:
Grab Syslog from Play Google and drop the captured logs here so that it can be fixed. No logs no help
Click to expand...
Click to collapse
Did you even read my post?
I was not able to capture a logcat. It crashed without writing anything to the system log.
Not sure how the latest version behaves as I'm still on some older one.
(I am an xposed dev myself so I know what I'm doing)
C3C076 said:
Did you even read my post?
I was not able to capture a logcat. It crashed without writing anything to the system log.
Click to expand...
Click to collapse
Not the first time i see this happening for some reason. Weird stuff
Enviado do meu SM-N950F através do Tapatalk
I had been using the GPhone app that was provided by another dev, but it had a known issue where it wouldn't provide the call blocking/spam filtering features.
I recently ran across this article that shows a way to get these features working, and have the GPlay verison of the app download (and update) normally. I take no credit for the mod, but I did install it and it does work. I don't know if it call-blocks, but I guess I'll find out. I don't get many spam calls, but if someone else does please let us know that this sub-feature does work as intended.
Anyway, here's the article: https://android.gadgethacks.com/how...blocking-business-search-any-android-0192637/
Basically, it's a Magisk module that allows you to download the Play store app. It says that you have to install the app after installing the module, but I found this happened automatically... so maybe something changed on the backend?
In case the article disappears or something, the official project is here on GitHub: https://github.com/Magisk-Modules-Repo/GoogleDialerFramework
Just wanted to share this, as it seems to work... again, if anyone can confirm the call-blocking features, that would be great!
schwinn8 said:
I had been using the GPhone app that was provided by another dev, but it had a known issue where it wouldn't provide the call blocking/spam filtering features.
I recently ran across this article that shows a way to get these features working, and have the GPlay verison of the app download (and update) normally. I take no credit for the mod, but I did install it and it does work. I don't know if it call-blocks, but I guess I'll find out. I don't get many spam calls, but if someone else does please let us know that this sub-feature does work as intended.
Anyway, here's the article: https://android.gadgethacks.com/how...blocking-business-search-any-android-0192637/
Basically, it's a Magisk module that allows you to download the Play store app. It says that you have to install the app after installing the module, but I found this happened automatically... so maybe something changed on the backend?
In case the article disappears or something, the official project is here on GitHub: https://github.com/Magisk-Modules-Repo/GoogleDialerFramework
Just wanted to share this, as it seems to work... again, if anyone can confirm the call-blocking features, that would be great!
Click to expand...
Click to collapse
Or just use Xposed module. Search for framework.
Sent from my LG-H932 using XDA Labs
BROKEN1981 said:
Or just use Xposed module. Search for framework.
Click to expand...
Click to collapse
I had too many issues with Xposed in the past (on previous phones), which is why I stopped using it on this phone. I also did not know that such a framework existed and was the solution to the blocking capability. It makes sense that Xposed could do this, though, as you have said.
Does that mean you confirm that the framework fixes the ability to call-block/filter?
schwinn8 said:
I had too many issues with Xposed in the past (on previous phones), which is why I stopped using it on this phone. I also did not know that such a framework existed and was the solution to the blocking capability. It makes sense that Xposed could do this, though, as you have said.
Does that mean you confirm that the framework fixes the ability to call-block/filter?
Click to expand...
Click to collapse
Hahahaha my fault. I actually thought I was using an Xposed module. Turns out it was magisk this whole time.
Sent from my LG-H932 using XDA Labs
Edit, the magisk module does it all. It just installs the framework. Then you just clear data from play store.