[Q] sprint galaxy s3 wont turn on - Sprint Samsung Galaxy S III

I was putting a rom on my sprint galaxy s3 phone and i put the wrong rom. The rom wasnt for sprint phones. So now my phone wont turn on even when i press the volume home and power button. Is there any way to fix?

Yeah you can try this http://forum.xda-developers.com/showthread.php?p=43724690 which many have had success with. Or you can send it somewhere to have Jtag repair. Jtag will run you about 60 dollars the method I linked is free but you have to know what your doing. Since you bricked your device I'm not sure if you would be able to complete the steps needed. Good luck.
Sent from the future via Tapatalk 4

edfunkycold said:
yeah you can try this http://forum.xda-developers.com/showthread.php?p=43724690 which many have had success with. Or you can send it somewhere to have jtag repair. Jtag will run you about 60 dollars the method i linked is free but you have to know what your doing. Since you bricked your device i'm not sure if you would be able to complete the steps needed. Good luck.
sent from the future via tapatalk 4
Click to expand...
Click to collapse
thanks ill give it a try.

sflecha35 said:
thanks ill give it a try.
Click to expand...
Click to collapse
That method is supposed to work but it didn't for me I had to get a jtag
Sent from my SPH-L710 using xda app-developers app

idontknowmang said:
that method is supposed to work but it didn't for me i had to get a jtag
sent from my sph-l710 using xda app-developers app
Click to expand...
Click to collapse
yeah it didnt work for me either im also getting a jtag repair

sflecha35 said:
yeah it didnt work for me either im also getting a jtag repair
Click to expand...
Click to collapse
Its a sure way to go. If the memory is corrupt it takes a bit longer they had my s3 for 2 days
Sent from my SPH-L710 using xda app-developers app

Related

[Q] Hardbricked Flashed international Rom SGH-i747

Hard bricked Att model Galaxy S III i was being a dumbass and accidentally flashed a international Rom and when i plug my phone to the outlet without a battery it has a red light on, when theres a battery in and its plugged in the phone shows no light or anything Can a Jig work for this? Any tips or help
oh ya and it shows up that qhsub_dload when i plug it in to my laptop
It is not hardbricked.. just softbricked but seriously read the titles and ****.. people have recovered from it just go searching around or wait for a reply with a link.
I can not stress enough.. READ EVERYTHING or else.
Edit: See if it shows up in odin, if odin sees it can you flash one of the stock SGS III AT&T roms.
Yea jigs wont work but see if you can get it in download mode and flash a stock img for your phone not the international one
Sent from my SPH-L710 using xda premium
http://forum.xda-developers.com/showthread.php?t=1727443
Thread that talks about this very thing, and how to fix it.
smartguy044 said:
Yea jigs wont work but see if you can get it in download mode and flash a stock img for your phone not the international one
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
FYI .. JIGS do work for the SGSIII .. I still have my JIG from when I was using my SGSII SkyRocket .. this JIG works on the SGSIII with no problems .. I use it all the time when putting my phone back to AT&T Stock through ODIN (rather than using the key combo).
its not soft bricked i cant get to download mode at all and the boot up logo doesnt show up either
Your phone is a doorstop. You ****ed the partitioning and overwrote the bootloader with nonsense. No, jigs are useless here. You need jtag to fix it__ http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-iii-jtag-brick-repair/
Randomacts said:
It is not hardbricked.. just softbricked but seriously read the titles and ****.. people have recovered from it just go searching around or wait for a reply with a link.
I can not stress enough.. READ EVERYTHING or else.
Edit: See if it shows up in odin, if odin sees it can you flash one of the stock SGS III AT&T roms.
Click to expand...
Click to collapse
its hard bricked cant get to download mode i do have stock att rom tho... if only i could get to download mode id be fine
LordGeek said:
FYI .. JIGS do work for the SGSIII .. I still have my JIG from when I was using my SGSII SkyRocket .. this JIG works on the SGSIII with no problems .. I use it all the time when putting my phone back to AT&T Stock through ODIN (rather than using the key combo).
Click to expand...
Click to collapse
When you used a JIG on the SGIII were you hardbricked? did it still take you to download mode?
A jig will help you if your phone boots but won't enter recovery and download mode but if your phone doesn't boot at all, not even a vibration, the jig won't work. Your safest bet is to take it back to the store and get a new one. They won't check if it is rooted. Worst case scenario if your not under warranty anymore, they may repair it and charge you .
Sent from my SGH-I747 using xda app-developers app
liltitiz said:
A jig will help you if your phone boots but won't enter recovery and download mode but if your phone doesn't boot at all, not even a vibration, the jig won't work. Your safest bet is to take it back to the store and get a new one. They won't check if it is rooted. Worst case scenario if your not under warranty anymore, they may repair it and charge you .
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
hm.. i bought it from ABT but my carrier is AT&T who do you recommend giving it too?
amzi said:
hm.. i bought it from ABT but my carrier is AT&T who do you recommend giving it too?
Click to expand...
Click to collapse
Rumor has it you can ship it back to samsung and theyll fix it free under warranty and pay to ship it too. Ive heard 4 or 5 different people confirm this. Id give that a shot.
amzi said:
hm.. i bought it from ABT but my carrier is AT&T who do you recommend giving it too?
Click to expand...
Click to collapse
Go to an att store they'll check if it still under warranty and they should take care of the rest. It is also possible they hand you a new one right away. You can also try abt but I would go with att
Sent from my SGH-I747 using xda app-developers app
---------- Post added at 01:19 PM ---------- Previous post was at 01:17 PM ----------
Sending it to Samsung will also works but it can take up to one month before you get your phone back.
Sent from my SGH-I747 using xda app-developers app
liltitiz said:
Go to an att store they'll check if it still under warranty and they should take care of the rest. It is also possible they hand you a new one right away. You can also try abt but I would go with att
Sent from my SGH-I747 using xda app-developers app
---------- Post added at 01:19 PM ---------- Previous post was at 01:17 PM ----------
Sending it to Samsung will also works but it can take up to one month before you get your phone back.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
no warranty am i screwed?
billard412 said:
Rumor has it you can ship it back to samsung and theyll fix it free under warranty and pay to ship it too. Ive heard 4 or 5 different people confirm this. Id give that a shot.
Click to expand...
Click to collapse
no warranty am i screwed??
Check out mobiletechvideos. They can probably fix you up.
Sent from my SAMSUNG-SGH-I747 using xda premium
amzi said:
no warranty am i screwed??
Click to expand...
Click to collapse
No warranty on a SGSIII !!!!!!
You have 1 year .. the damn phone ain't a year old yet !!!
amzi said:
no warranty am i screwed?
Click to expand...
Click to collapse
Well, if you have no warranty, try with the store anyway. If they don't want to help you, you'll have to deal directly with Samsung's customers service. They may charge the repair but they'll get it fixed.
Sent from my SGH-I747 using xda app-developers app
liltitiz said:
Well, if you have no warranty, try with the store anyway. If they don't want to help you, you'll have to deal directly with Samsung's customers service. They may charge the repair but they'll get it fixed.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1727443
what about this? will this help at all??
Worth a try. At this point, what is it going to hurt?

[Q] Hard Bricked Tmobile Galaxy S3?

Yes, I too hard bricked my t999 but funny thing is I've didn't flash any roms. Here's what happened, I was already on Wicked V5 rom, I went to the galaxys3root.com and downloaded MIUI for Tmobile gs3. When I tried to restart my phone to recovery mode the phone just turned off and never turn on again. Someone please help me. I don't really have time to send my phone to Texas, does anyone know any other ways to fix this? Is there service around NJ or Philly area?
Have you done all the usual? Pull battery wait a few put it back in and try to get into recovery or download mode?
Sent from my SGH-T999 using xda premium
Reply
funziebear said:
Have you done all the usual? Pull battery wait a few put it back in and try to get into recovery or download mode?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Yes, no luck..
Arent u able to get into download mode? Seems like you havent flash another s 3 rom so you should be able to get into download mode.
I had dome several stupid thing on phone and thought it bricked but I was able to get working.
Sent from my SGH-T999 using xda premium
Reply
bikrame said:
Arent u able to get into download mode? Seems like you havent flash another s 3 rom so you should be able to get into download mode.
I had dome several stupid thing on phone and thought it bricked but I was able to get working.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Yes, I didn't flash any roms, at least any wrong ones, I've only downloaded the miui for tmobile version but phone turned off when I tried to reboot into recovery, I've tried to boot into download by taking out battery and pressing volume down+home+power and plugging battery but nothing happens..
lampardd said:
Yes, I didn't flash any roms, at least any wrong ones, I've only downloaded the miui for tmobile version but phone turned off when I tried to reboot into recovery, I've tried to boot into download by taking out battery and pressing volume down+home+power and plugging battery but nothing happens..
Click to expand...
Click to collapse
Have you tried recovery?
Sent from my SGH-T999 using xda app-developers app
Reply
chrisram88 said:
Have you tried recovery?
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Yes I've, all I'm getting is qhsusb_dload error in my device manager when I plug the phone to my pc.
Send it for JTAG repair or use a jig. Your phone might not be bricked, but there is something wrong with it.
Sent from my SGH-T989 using xda premium
Is it plugged in when you try to power on? Try it both unplugged and plugged if you havent already.
Also try holding power for about 10-20 seconds.
Sent from my SGH-T999 using xda app-developers app
Does it vibrate
Sent from my SGH-T999 using xda app-developers app
Reply
DocHoliday77 said:
Is it plugged in when you try to power on? Try it both unplugged and plugged if you havent already.
Also try holding power for about 10-20 seconds.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I've tried everything, the phone doesn't vibrate either.
lampardd said:
Yes I've, all I'm getting is qhsusb_dload error in my device manager when I plug the phone to my pc.
Click to expand...
Click to collapse
Yup that's a brick... Search qhsusb and see all the threads related. They are all bricks. Nothing you can do but jtag. Jig won't fix it.
Sent from my SGH-T999 using xda app-developers app
Reply
chrisram88 said:
Yup that's a brick... Search qhsusb and see all the threads related. They are all bricks. Nothing you can do but jtag. Jig won't fix it.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Okay, but is Texas the only place to get the phone fixed, no one else in US knows how to do this jtag thing besides mobiletech who's 2000 miles away from me?
lampardd said:
Okay, but is Texas the only place to get the phone fixed, no one else in US knows how to do this jtag thing besides mobiletech who's 2000 miles away from me?
Click to expand...
Click to collapse
Best and only place I know.
Sent from my SGH-T999 using xda app-developers app
lampardd said:
Yes, I too hard bricked my t999 but funny thing is I've didn't flash any roms. Here's what happened, I was already on Wicked V5 rom, I went to the galaxys3root.com and downloaded MIUI for Tmobile gs3. When I tried to restart my phone to recovery mode the phone just turned off and never turn on again. Someone please help me. I don't really have time to send my phone to Texas, does anyone know any other ways to fix this? Is there service around NJ or Philly area?
Click to expand...
Click to collapse
Same issue here! Any help?
rekamyenom said:
Same issue here! Any help?
Click to expand...
Click to collapse
so it seems that the common issue here is that u both downloaded MIUI from the same wepage... I would think a malicious download... and in all Honesty I had bad experiences the guy's tut.... (with the guy running the site) I dunno I dont want to point finger or nothing but 2 people with same problem?? I suspect treachery afoot... lol
scratch that... I scanned MIUI Zip file and it contained no threats... so I'm guessing a hardware mulfuction?? or simply u got a bad phone.
Try Samsung warranty since you can't get into download mode they shouldn't know it's rooted. I wouldn't say this is a user error since you didn't even flash a rom
Sent from my SGH-T999 using xda premium
md1008 said:
Try Samsung warranty since you can't get into download mode they shouldn't know it's rooted. I wouldn't say this is a user error since you didn't even flash a rom
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
And you think Samsung won't have a way to enter download mode and see the counter? it's there hardware they know it better than we do.
Sent From My Galaxy S3 Boricua 100%
I gaved up on trying to fix it myself. Send your phone to mobile tech videos, guy did a great job. However I found another person on eBay the other day with high ratings who also does the jtag for only $30. (mobiletech was 60). Good luck
Sent from my SGH-T999 using xda app-developers app
razielpr said:
And you think Samsung won't have a way to enter download mode and see the counter? it's there hardware they know it better than we do.
Sent From My Galaxy S3 Boricua 100%
Click to expand...
Click to collapse
Dont you have regular tmobile warranty? the phone wont power on, no water damage, sounds like a clear cut case of getting your phone swapped out for you.

[Q] Bricked S3 with Red LED and seen by computer?

I just bricked my S3 and whenever I plug it in, eventually, some combination of button presses makes a red LED show up, however, no screen on. Whats even weirder is that when I plug it in, it see's some thing called QHSUSB_DLOAD, and attempts to install drivers for it. I'm wondering if this might allow me to fix it? If all else fails, can someone refer me to a JTAG repair service...
Edit - When I attempt DL mode, I can even hear it disconnect, then reconnect. It fails the driver install though.
Unfortunately bud your hard bricked.
Sent from my SGH-T999 using XDA Premium App
What were you trying to do? Root? Using what method?
Sent from my SGH-T999 using xda premium
You are definitely hard bricked!
Sent from my SGH-T999
Wait what? So you are able to get it into download mode is what you are saying? Or you can't?
Wicked68 said:
What were you trying to do? Root? Using what method?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I was making a port from the S2. I changed the updater script to let it flash, it did, and then it killed me.
Update: WOW. T-Mobile replaced it for me! I don't even have warranty left! Yet again, my company saves me.
Sent from my SGH-T999 using xda app-developers app
What did you say to get them to replace it?
Sent from my SGH-T999 using xda premium
mrbmg said:
What did you say to get them to replace it?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
All I did was brought it into the store, handed it to the guy and said it was broken. Said I had a FACTORY warranty (from Samsung), and that Samsung told me to have the store do the replacement for me. The guy behind the desk said, "Yeah, whatever you stick your SIM into, as long as it's T-
Mobile, your covered. You can even buy phones offline,". It's going to be here monday. Shipped Friday, next day shipping, only 5$. I'm so happy I'm not paying 70$ for a JTAG... Not sure if this'll work for everyone, but it did for me!

Can i root my sg3 with a jig??

Sent from my useless no data sync gs3
smallyetzon said:
Sent from my useless no data sync gs3
Click to expand...
Click to collapse
Why not try an external micro SD?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
I don't think you can root your device with a jig, but the jig can help you if you mess up trying to do something to your device. But as far as rooting it, you might need to use ODIN.
Sent from my Galaxy S3
mhays705 said:
Why not try an external micro SD?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
rooting with a external sd card?? i wanna know how????
Sent from my useless no data sync gs3
TheKucho said:
I don't think you can root your device with a jig, but the jig can help you if you mess up trying to do something to your device. But as far as rooting it, you might need to use ODIN.
Sent from my Galaxy S3
Click to expand...
Click to collapse
thats the issue i cant connect to comp. due to a bad mini port
Sent from my useless no data sync gs3
smallyetzon said:
rooting with a external sd card?? i wanna know how????
Sent from my useless no data sync gs3
Click to expand...
Click to collapse
Put the files needed to flash to obtain root on an external and flash. Sorry thought it was self explanatory.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
mhays705 said:
Put the files needed to flash to obtain root on an external and flash. Sorry thought it was self explanatory.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
sorry but is not as simple as you think man i did that and try to flash cwm and superuser and it wont work since i have stock android recovery it says "signature verification failed"
Sent from my useless no data sync gs3
smallyetzon said:
thats the issue i cant connect to comp. due to a bad mini port
Sent from my useless no data sync gs3
Click to expand...
Click to collapse
So how would a jig do any good of you have a bad mini port?
There is a method to root by using terminal emulator and some files.
Look for it.
Its not hard.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
smallyetzon said:
sorry but is not as simple as you think man i did that and try to flash cwm and superuser and it wont work since i have stock android recovery it says "signature verification failed"
Sent from my useless no data sync gs3
Click to expand...
Click to collapse
I'm not quite familiar with mobile Odin. But flash a stock image that has twrp in it. Through mobile odib. Cwm is too buggy.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
mhays705 said:
I'm not quite familiar with mobile Odin. But flash a stock image that has twrp in it. Through mobile odib. Cwm is too buggy.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
to use mobile odin i need to be rooted thanks anyway
Sent from my useless no data sync gs3
jayRokk said:
So how would a jig do any good of you have a bad mini port?
There is a method to root by using terminal emulator and some files.
Look for it.
Its not hard.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
my mini port only charges so i thought the jig would do something but if it doesnt root then i wont need it, i found a method called motochopper tried it but it dont work with my version of gs3 i747 im crying out for help to see if there is a method i havent try or if it exist but thanks a lot
Sent from my useless no data sync gs3
http://item.mobileweb.ebay.com/viewitem?index=0&sbk=1&nav=SEARCH&itemId=140981411658
Its not hard to replace.
I've replaced my mic, camera, power button, and proximity sensor all for under 30$
The S3 is EASY to take apart and replace parts. Just try it. 2$ spent is way better over 200$
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
smallyetzon said:
to use mobile odin i need to be rooted thanks anyway
Sent from my useless no data sync gs3
Click to expand...
Click to collapse
Ah completely forgot about the root aspect. I believe there is a way to do it through a terminal emulator. But I know none of the specifics.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
jayRokk said:
http://item.mobileweb.ebay.com/viewitem?index=0&sbk=1&nav=SEARCH&itemId=140981411658
Its not hard to replace.
I've replaced my mic, camera, power button, and proximity sensor all for under 30$
The S3 is EASY to take apart and replace parts. Just try it. 2$ spent is way better over 200$
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
there is an11 pin soldering i think to do this huh a little challenging i got it replaced on a electronic shop for $60!!!! and came back charging but not connecting like if there is a bad pin or something i dont know
Sent from my useless no data sync gs3
mhays705 said:
Ah completely forgot about the root aspect. I believe there is a way to do it through a terminal emulator. But I know none of the specifics.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
i think you are talking about motochopper method but i tried that one thru terminal and everything went write but after i booted up still no root
Sent from my useless no data sync gs3
smallyetzon said:
there is an11 pin soldering i think to do this huh a little challenging i got it replaced on a electronic shop for $60!!!! and came back charging but not connecting like if there is a bad pin or something i dont know
Sent from my useless no data sync gs3
Click to expand...
Click to collapse
I would go back to that shop and get them to fix it right. That's too much money for a half ass job.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
mhays705 said:
I would go back to that shop and get them to fix it right. That's too much money for a half ass job.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
yeah man i did fight for it but they said its a risk customer takes when replacing an original part to a replacement part :banghead:
Sent from my useless no data sync gs3
smallyetzon said:
yeah man i did fight for it but they said its a risk customer takes when replacing an original part to a replacement part :banghead:
Sent from my useless no data sync gs3
Click to expand...
Click to collapse
WHAT???
Why would you do it then? Theyre pretty much telling you "If we do a s*** job its not our fault"
you should of gone somewhere were they were going to give you some king of warranty and someone who knows what theyre doing.
Thats a load of BS..... i apologize for the language but this is a risk you too that you shouldnt of taken. now youre left with a bas UBS port.
this is all i can think of, that will be the best bet
http://www.ebay.com/itm/Samsung-Gal...e_Replacement_Parts_Tools&hash=item2a2ef2edee
or go somewhere where they actually know what theyre doing.
jayRokk said:
WHAT???
Why would you do it then? Theyre pretty much telling you "If we do a s*** job its not our fault"
you should of gone somewhere were they were going to give you some king of warranty and someone who knows what theyre doing.
Thats a load of BS..... i apologize for the language but this is a risk you too that you shouldnt of taken. now youre left with a bas UBS port.
this is all i can think of, that will be the best bet
http://www.ebay.com/itm/Samsung-Gal...e_Replacement_Parts_Tools&hash=item2a2ef2edee
or go somewhere where they actually know what theyre doing.
Click to expand...
Click to collapse
Nah they said that after they install the part,, before, they told me the price and that they can fix it. So $60 + $150 = $210 ouch!! thats what i was afraid of im willing to sell it or exchange it for another one with someone but anyway i still have hope on a dev to make this happend for the i747 there is a lot of devices that can root without a computer
Sent from my useless no data sync gs3
smallyetzon said:
Nah they said that after they install the part,, before, they told me the price and that they can fix it. So $60 + $150 = $210 ouch!! thats what i was afraid of im willing to sell it or exchange it for another one with someone but anyway i still have hope on a dev to make this happend for the i747 there is a lot of devices that can root without a computer
Sent from my useless no data sync gs3
Click to expand...
Click to collapse
That ebay motherboard has everything working. All you would need to do is swapp out the motherboads.
(this is just connecting and disconnecting a few connectors)
its 150$ plus free shipping. its not bad and probably the cheapest if no one comes up with a way to root with out PC

[Q] Please help! Hard-bricked T999L

Hi, so I hard-bricked my S3 and I already tried using a jig and writing a de-brick .img to my ext. sd card, and neither worked so far. My phone remains completely unresponsive after I followed instructions on this site. The only response that my phone gives is a red light when it's connected to my pc or wall charger WHEN the battery is taken out, then the light disappears after several seconds. Also, my pc does recognize that something is connected, but then I get a bad connection sound after a few seconds. So far it seems that I tried every troubleshooting method on this site and I don't know what else to do. The last resort option I'm considering is sending my phone to a third party to get it de-bricked.
if you tried everything then probably a jtag is the only fix
chrisram88 said:
if you tried everything then probably a jtag is the only fix
Click to expand...
Click to collapse
Where could one get a jtag?? I have googled it but there are so many different models that pop up. I would assume we would need one for the Armv7, no?
is this it -> http://www.ebay.com/itm/like/190859630462?lpid=82 ??
codecaine21 said:
Where could one get a jtag?? I have googled it but there are so many different models that pop up. I would assume we would need one for the Armv7, no?
is this it -> http://www.ebay.com/itm/like/190859630462?lpid=82 ??
Click to expand...
Click to collapse
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-iii-jtag-brick-repair/ email them I you have any questions. That will definitely fix your hard brick.
Sent from my C6916
chrisram88 said:
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-iii-jtag-brick-repair/ email them I you have any questions. That will definitely fix your hard brick.
Sent from my C6916
Click to expand...
Click to collapse
No I mean if I dont wanna sent it out and do it on my own. What JTAG would I need. I don't have a bricked phone. I'm just curious.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
codecaine21 said:
No I mean if I dont wanna sent it out and do it on my own. What JTAG would I need. I don't have a bricked phone. I'm just curious.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ahh ok.... I'm not sure man.
Sent from my C6916
chrisram88 said:
Ahh ok.... I'm not sure man.
Sent from my C6916
Click to expand...
Click to collapse
I think we use the Armv7 and this might be the jtag device -> http://www.ebay.com/itm/like/190859630462?lpid=82 I'm curious as to how the process works though.

Categories

Resources