Related
Hi People,
I just murdered my T-Mobile SII (T989) :crying:
It was bright Saturday morning, was browsing through web, saw update on forums about official ICS update available for T-Mobile devices.
I have immediately and successfully updated my device to ICS, everything went well and was enjoyinh ICS. But, then the worm inside me yapped and from nowhere I started rooting the phone.
This is the moment it got killed and now I've dead device in my hand.
1. Buttons combo doesn't work.
2. Unable to get the device in download mode.
3. Phone is no longer getting detected on Laptop and throws (qhsusb_load / drivers not successfully installed.) error message.
4. Phone doesn't turn on at all.
I know it’s hard-bricked, but please tell me if there is any way to solve this?
Will JIG option work; if the device is hard-bricked?
I am based in India and sending phone for JTAG would be bit difficult, so kindly suggest if there is any way?
Nikhil
The jig is supposed to work in these type of situations.
Sent from my SAMSUNG-SGH-T989 using xda premium
I went through this and as far as I know the only way to fix is a jtag service. Or if you can jtag it yourself. I made a 301k USB jig and it doesn't work so jtag is the only option I know unless you warranty it.
Sent from my SGH-T989 using xda premium
You Murderer! I just reported you to the police
Sent from my Sony Tablet S using Tapatalk 2
OP, you had to of selected re-partion hard drive while flashing the custom recovery through Odin. If this is true there is no fix. Sorry. This destroys the boot partion and recovery nor download mode will work. Did you get a failed message through Odin?
Jamison904 said:
OP, you had to of selected re-partion hard drive while flashing the custom recovery through Odin. If this is true there is no fix. Sorry. This destroys the boot partion and recovery nor download mode will work. Did you get a failed message through Odin?
Click to expand...
Click to collapse
I could have sworn that rooting this phone was easier than rooting my att sgs 2. You must have done something wrong
Sent from my SAMSUNG-SGH-I777 using XDA
AMAZINGGGGGGG GRACEEEEEEEE HOW SWEEEETTTT THE SOUNDDDDDD
Sent from my SAMSUNG-SGH-T989 using XDA Premium App
lawalty said:
The jig is supposed to work in these type of situations.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
JIG will work in this situation?
send it to mobiletechvideos, they ship international.
Check out mobiletechvideos
Today, my friend, is great as I just got my previously hard bricked phone back from mobiletechvideos! They unbricked mine after I accidentally tried installing a different model gs2 rom to my phone (price is right fail music). If using the jig everyone recommended isn't working, definitely send it to them and they'll try to get your phone back to life!:laugh::good:
Good to here. I've heard a lot of good reviews for them. Glad your back up and running. NOW GET TO FLASHING!
Sent from my SGH-T989 using xda app-developers app
http://www.youtube.com/watch?v=Wn_iz8z2AGw
Sorry I had to!! Seriously though, good luck unbricking your phone I hope you get it fixed!
flashy flashy
Tnallen said:
Good to here. I've heard a lot of good reviews for them. Glad your back up and running. NOW GET TO FLASHING!
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
I'm still a pretty big noob when it comes to flashing stuff! I'm on gingerbread right now and am a little scared to death to flash anything :S then again the main reason I bricked out was because I attempted to flash a rom that was for a different galaxy s2. I'm still researching on how to safetly flash different roms and which ones work the best
Can someone explain to me what JIG is?
Sent from my SGH-T989 using xda app-developers app
a93hunt said:
Can someone explain to me what JIG is?
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
A jig is a USB chord that you take the chord off and attach certain resistors(usually total 301k) to the micro USB connector. Then when u plug it into a phone it should force it into download mode. It however does not work for this phone.
Sent from my SGH-T989 using xda premium
Anyone else having issue with apps2sd?
captain134 said:
A jig is a USB chord that you take the chord off and attach certain resistors(usually total 301k) to the micro USB connector. Then when u plug it into a phone it should force it into download mode. It however does not work for this phone.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
I have a jig and it puts it into download mode every time got it for 5 bucks off ebay
Sent from my SAMSUNG-SGH-T989 using xda premium
USB dongle download mode is what he's talking about I think
Sent from my SGH-T989 using Tapatalk
Never heard of that mode what's that used for??
Sent from my SAMSUNG-SGH-T989 using xda premium
Yes, I too hard bricked my t999 but funny thing is I've didn't flash any roms. Here's what happened, I was already on Wicked V5 rom, I went to the galaxys3root.com and downloaded MIUI for Tmobile gs3. When I tried to restart my phone to recovery mode the phone just turned off and never turn on again. Someone please help me. I don't really have time to send my phone to Texas, does anyone know any other ways to fix this? Is there service around NJ or Philly area?
Have you done all the usual? Pull battery wait a few put it back in and try to get into recovery or download mode?
Sent from my SGH-T999 using xda premium
Reply
funziebear said:
Have you done all the usual? Pull battery wait a few put it back in and try to get into recovery or download mode?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Yes, no luck..
Arent u able to get into download mode? Seems like you havent flash another s 3 rom so you should be able to get into download mode.
I had dome several stupid thing on phone and thought it bricked but I was able to get working.
Sent from my SGH-T999 using xda premium
Reply
bikrame said:
Arent u able to get into download mode? Seems like you havent flash another s 3 rom so you should be able to get into download mode.
I had dome several stupid thing on phone and thought it bricked but I was able to get working.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Yes, I didn't flash any roms, at least any wrong ones, I've only downloaded the miui for tmobile version but phone turned off when I tried to reboot into recovery, I've tried to boot into download by taking out battery and pressing volume down+home+power and plugging battery but nothing happens..
lampardd said:
Yes, I didn't flash any roms, at least any wrong ones, I've only downloaded the miui for tmobile version but phone turned off when I tried to reboot into recovery, I've tried to boot into download by taking out battery and pressing volume down+home+power and plugging battery but nothing happens..
Click to expand...
Click to collapse
Have you tried recovery?
Sent from my SGH-T999 using xda app-developers app
Reply
chrisram88 said:
Have you tried recovery?
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Yes I've, all I'm getting is qhsusb_dload error in my device manager when I plug the phone to my pc.
Send it for JTAG repair or use a jig. Your phone might not be bricked, but there is something wrong with it.
Sent from my SGH-T989 using xda premium
Is it plugged in when you try to power on? Try it both unplugged and plugged if you havent already.
Also try holding power for about 10-20 seconds.
Sent from my SGH-T999 using xda app-developers app
Does it vibrate
Sent from my SGH-T999 using xda app-developers app
Reply
DocHoliday77 said:
Is it plugged in when you try to power on? Try it both unplugged and plugged if you havent already.
Also try holding power for about 10-20 seconds.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I've tried everything, the phone doesn't vibrate either.
lampardd said:
Yes I've, all I'm getting is qhsusb_dload error in my device manager when I plug the phone to my pc.
Click to expand...
Click to collapse
Yup that's a brick... Search qhsusb and see all the threads related. They are all bricks. Nothing you can do but jtag. Jig won't fix it.
Sent from my SGH-T999 using xda app-developers app
Reply
chrisram88 said:
Yup that's a brick... Search qhsusb and see all the threads related. They are all bricks. Nothing you can do but jtag. Jig won't fix it.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Okay, but is Texas the only place to get the phone fixed, no one else in US knows how to do this jtag thing besides mobiletech who's 2000 miles away from me?
lampardd said:
Okay, but is Texas the only place to get the phone fixed, no one else in US knows how to do this jtag thing besides mobiletech who's 2000 miles away from me?
Click to expand...
Click to collapse
Best and only place I know.
Sent from my SGH-T999 using xda app-developers app
lampardd said:
Yes, I too hard bricked my t999 but funny thing is I've didn't flash any roms. Here's what happened, I was already on Wicked V5 rom, I went to the galaxys3root.com and downloaded MIUI for Tmobile gs3. When I tried to restart my phone to recovery mode the phone just turned off and never turn on again. Someone please help me. I don't really have time to send my phone to Texas, does anyone know any other ways to fix this? Is there service around NJ or Philly area?
Click to expand...
Click to collapse
Same issue here! Any help?
rekamyenom said:
Same issue here! Any help?
Click to expand...
Click to collapse
so it seems that the common issue here is that u both downloaded MIUI from the same wepage... I would think a malicious download... and in all Honesty I had bad experiences the guy's tut.... (with the guy running the site) I dunno I dont want to point finger or nothing but 2 people with same problem?? I suspect treachery afoot... lol
scratch that... I scanned MIUI Zip file and it contained no threats... so I'm guessing a hardware mulfuction?? or simply u got a bad phone.
Try Samsung warranty since you can't get into download mode they shouldn't know it's rooted. I wouldn't say this is a user error since you didn't even flash a rom
Sent from my SGH-T999 using xda premium
md1008 said:
Try Samsung warranty since you can't get into download mode they shouldn't know it's rooted. I wouldn't say this is a user error since you didn't even flash a rom
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
And you think Samsung won't have a way to enter download mode and see the counter? it's there hardware they know it better than we do.
Sent From My Galaxy S3 Boricua 100%
I gaved up on trying to fix it myself. Send your phone to mobile tech videos, guy did a great job. However I found another person on eBay the other day with high ratings who also does the jtag for only $30. (mobiletech was 60). Good luck
Sent from my SGH-T999 using xda app-developers app
razielpr said:
And you think Samsung won't have a way to enter download mode and see the counter? it's there hardware they know it better than we do.
Sent From My Galaxy S3 Boricua 100%
Click to expand...
Click to collapse
Dont you have regular tmobile warranty? the phone wont power on, no water damage, sounds like a clear cut case of getting your phone swapped out for you.
How do u know if your still safe to try usb Jig to force dload mode with knowing what functions are still showing signs of life ? Like if manual mode.doesnt do it , and u have a red light when charging with no battery.And or can still here connect and disconnect sounds on a Pc.This is a new Question related to possible soft brick only cause im waiting for a real tech savy member to.. hear me out...maybe help in detail.If you get sounds from phone to pc when plug in and can feel the phone quietly.vibe on and off during.button combo ...but all the time with a black screen
Sent from my LG-MS770 using xda app-developers
lojak29 said:
How do u know if your still safe to try usb Jig to force dload mode with knowing what functions are still showing signs of life ? Like if manual mode.doesnt do it , and u have a red light when charging with no battery.And or can still here connect and disconnect sounds on a Pc.This is a new Question related to possible soft brick only cause im waiting for a real tech savy member to.. hear me out...maybe help in detail.If you get sounds from phone to pc when plug in and can feel the phone quietly.vibe on and off during.button combo ...but all the time with a black screen
Sent from my LG-MS770 using xda app-developers
Click to expand...
Click to collapse
What did you do to brick your phone?
Sent from my Nexus 4 using xda premium
http://forum.xda-developers.com/showthread.php?p=39663897#post39663897
http://forum.xda-developers.com/showthread.php?p=39645631#post39645631
Well Im desperately trying to find anyway to avoid jtag expenses, i took.it to a sprint tech i know who deals with this stuff after i had exhausted my options .He said jtag it . Earlier today i made a 300kohm 1/2 watt jig but to no luck it wouldnt force dload mode?
Ive been reading on this other explored method of sd card unbricking using a jig and tweezers to trip a resistor on the board and manually flash a new bootloader it seems..very very very complicated
And noone has succesfully done this as far as i know.
All i did was accidentally flash my old gsm note 2 t889 backup ,jedi master10 rom, when i meant to flash jedi invasion I overlooked the words master for invasion after it flashed it said
Install failed in RED and No OS installed at top then i realized what i did and tried to Save my a** and restore my nandroid that failed also ,then i tried to dig myself out this mess and flash the only other t999 zip rom i had on my sd and that failed Said no OS Installed on top after i rebooted never could reboot again Not even 3button.works for dload mode
Sent from my LG-MS770 using xda app-developers app
Its been 24hrs bud !!!By the way ,the great moderator Mr kenny glass explains on the xda rules that seem to be so strict, anyone can legally reitterate on a previous post,so the links to my old post mean nothing
Sent from my LG-MS770 using xda app-developers app
He wanted to know what you did, I linked him to threads that explain what you did. I have no further interest in helping you, because of your attitude. As others seem to have chosen.
Dude you flashed a Rom for a different phone. You're boned! Jtag it.
Sent from my SGH-T999 using Tapatalk 2
bfranklin1986 said:
Dude you flashed a Rom for a different phone. You're boned! Jtag it.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Yeah, exactly. I remember thus thread from yesterday and the answer is still the same.
Sent from my SGH-T999 using Tapatalk 2
Pennycake said:
Yeah, exactly. I remember thus thread from yesterday and the answer is still the same.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
I know on the s2 you can force download mode by using a g2x charger and usb! But only an usb and charger made by lg for the g2x! Its does work I tried it not sure if it will on a s3 though
Sent from my Nexus 4 using xda premium
Thats interesting who takes credit for this bizarre workaround?
Is it something on that specific circuit board in the usb that triggers this
Sent from my LG-MS770 using xda app-developers app
lojak29 said:
Thats interesting who takes credit for this bizarre workaround?
Is it something on that specific circuit board in the usb that triggers this
Sent from my LG-MS770 using xda app-developers app
Click to expand...
Click to collapse
i think its a way that samsung built in specifically for them to refurbish phones in the bricked condition. other than that i have no idea lol
lojak29 said:
Thats interesting who takes credit for this bizarre workaround?
Is it something on that specific circuit board in the usb that triggers this
Sent from my LG-MS770 using xda app-developers app
Click to expand...
Click to collapse
Yes its built into the usb and charger I dunno why but it does work for the s2 never tried the s3
Sent from my Nexus 4 using xda premium
ziggy46 said:
i think its a way that samsung built in specifically for them to refurbish phones in the bricked condition. other than that i have no idea lol
Click to expand...
Click to collapse
I believe you are correct. I am still a noob at this tho.. But from what I see from an engineering stand-point, you nailed it.
re: hard or soft brick
lojak29 said:
How do u know if your still safe to try usb Jig to force dload mode with knowing what functions are still showing signs of life ? Like if manual mode.doesnt do it , and u have a red light when charging with no battery.And or can still here connect and disconnect sounds on a Pc.This is a new Question related to possible soft brick only cause im waiting for a real tech savy member to.. hear me out...maybe help in detail.If you get sounds from phone to pc when plug in and can feel the phone quietly.vibe on and off during.button combo ...but all the time with a black screen
Sent from my LG-MS770 using xda app-developers
Click to expand...
Click to collapse
I don't know all the specifics in your case, but I can tell you this about a hard or a soft bricked phone.
Plugging a Jig into any android phone is safe and will not harm it at all regardless of it's condition.
If the phone is hard bricked it will not go into download mode even with a Jig.
It makes no difference what the issue or problem is with the phone, simply
plugging a Jig into it will either get you into download mode or it won't.
The way you can tell if the phone is hard bricked is if the phone's screen and or
led's do not light up at all even with a known charged battery and regardless
of which button or combination of buttons are depressed.
If the phone vibrates it usually means that it's not hard bricked.
Hard bricked phones are DEAD they show no signs of life at all
that's why they are called BRICKS.
One of the nice things about the jig is that it can work even if the computer
does not recognize the phone when it's normally plugged into the usb port.
So if your phone is NOT hard bricked my suggestion would be to plug in the
Jig get it into download mode and have Odin ready with the stock or stock
rooted Tmobile Jellybean v4.1.1 firmware ready to flash using the TAR file.
Good Luck!
Sent from my useless no data sync gs3
smallyetzon said:
Sent from my useless no data sync gs3
Click to expand...
Click to collapse
Why not try an external micro SD?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
I don't think you can root your device with a jig, but the jig can help you if you mess up trying to do something to your device. But as far as rooting it, you might need to use ODIN.
Sent from my Galaxy S3
mhays705 said:
Why not try an external micro SD?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
rooting with a external sd card?? i wanna know how????
Sent from my useless no data sync gs3
TheKucho said:
I don't think you can root your device with a jig, but the jig can help you if you mess up trying to do something to your device. But as far as rooting it, you might need to use ODIN.
Sent from my Galaxy S3
Click to expand...
Click to collapse
thats the issue i cant connect to comp. due to a bad mini port
Sent from my useless no data sync gs3
smallyetzon said:
rooting with a external sd card?? i wanna know how????
Sent from my useless no data sync gs3
Click to expand...
Click to collapse
Put the files needed to flash to obtain root on an external and flash. Sorry thought it was self explanatory.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
mhays705 said:
Put the files needed to flash to obtain root on an external and flash. Sorry thought it was self explanatory.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
sorry but is not as simple as you think man i did that and try to flash cwm and superuser and it wont work since i have stock android recovery it says "signature verification failed"
Sent from my useless no data sync gs3
smallyetzon said:
thats the issue i cant connect to comp. due to a bad mini port
Sent from my useless no data sync gs3
Click to expand...
Click to collapse
So how would a jig do any good of you have a bad mini port?
There is a method to root by using terminal emulator and some files.
Look for it.
Its not hard.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
smallyetzon said:
sorry but is not as simple as you think man i did that and try to flash cwm and superuser and it wont work since i have stock android recovery it says "signature verification failed"
Sent from my useless no data sync gs3
Click to expand...
Click to collapse
I'm not quite familiar with mobile Odin. But flash a stock image that has twrp in it. Through mobile odib. Cwm is too buggy.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
mhays705 said:
I'm not quite familiar with mobile Odin. But flash a stock image that has twrp in it. Through mobile odib. Cwm is too buggy.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
to use mobile odin i need to be rooted thanks anyway
Sent from my useless no data sync gs3
jayRokk said:
So how would a jig do any good of you have a bad mini port?
There is a method to root by using terminal emulator and some files.
Look for it.
Its not hard.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
my mini port only charges so i thought the jig would do something but if it doesnt root then i wont need it, i found a method called motochopper tried it but it dont work with my version of gs3 i747 im crying out for help to see if there is a method i havent try or if it exist but thanks a lot
Sent from my useless no data sync gs3
http://item.mobileweb.ebay.com/viewitem?index=0&sbk=1&nav=SEARCH&itemId=140981411658
Its not hard to replace.
I've replaced my mic, camera, power button, and proximity sensor all for under 30$
The S3 is EASY to take apart and replace parts. Just try it. 2$ spent is way better over 200$
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
smallyetzon said:
to use mobile odin i need to be rooted thanks anyway
Sent from my useless no data sync gs3
Click to expand...
Click to collapse
Ah completely forgot about the root aspect. I believe there is a way to do it through a terminal emulator. But I know none of the specifics.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
jayRokk said:
http://item.mobileweb.ebay.com/viewitem?index=0&sbk=1&nav=SEARCH&itemId=140981411658
Its not hard to replace.
I've replaced my mic, camera, power button, and proximity sensor all for under 30$
The S3 is EASY to take apart and replace parts. Just try it. 2$ spent is way better over 200$
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
there is an11 pin soldering i think to do this huh a little challenging i got it replaced on a electronic shop for $60!!!! and came back charging but not connecting like if there is a bad pin or something i dont know
Sent from my useless no data sync gs3
mhays705 said:
Ah completely forgot about the root aspect. I believe there is a way to do it through a terminal emulator. But I know none of the specifics.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
i think you are talking about motochopper method but i tried that one thru terminal and everything went write but after i booted up still no root
Sent from my useless no data sync gs3
smallyetzon said:
there is an11 pin soldering i think to do this huh a little challenging i got it replaced on a electronic shop for $60!!!! and came back charging but not connecting like if there is a bad pin or something i dont know
Sent from my useless no data sync gs3
Click to expand...
Click to collapse
I would go back to that shop and get them to fix it right. That's too much money for a half ass job.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
mhays705 said:
I would go back to that shop and get them to fix it right. That's too much money for a half ass job.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
yeah man i did fight for it but they said its a risk customer takes when replacing an original part to a replacement part :banghead:
Sent from my useless no data sync gs3
smallyetzon said:
yeah man i did fight for it but they said its a risk customer takes when replacing an original part to a replacement part :banghead:
Sent from my useless no data sync gs3
Click to expand...
Click to collapse
WHAT???
Why would you do it then? Theyre pretty much telling you "If we do a s*** job its not our fault"
you should of gone somewhere were they were going to give you some king of warranty and someone who knows what theyre doing.
Thats a load of BS..... i apologize for the language but this is a risk you too that you shouldnt of taken. now youre left with a bas UBS port.
this is all i can think of, that will be the best bet
http://www.ebay.com/itm/Samsung-Gal...e_Replacement_Parts_Tools&hash=item2a2ef2edee
or go somewhere where they actually know what theyre doing.
jayRokk said:
WHAT???
Why would you do it then? Theyre pretty much telling you "If we do a s*** job its not our fault"
you should of gone somewhere were they were going to give you some king of warranty and someone who knows what theyre doing.
Thats a load of BS..... i apologize for the language but this is a risk you too that you shouldnt of taken. now youre left with a bas UBS port.
this is all i can think of, that will be the best bet
http://www.ebay.com/itm/Samsung-Gal...e_Replacement_Parts_Tools&hash=item2a2ef2edee
or go somewhere where they actually know what theyre doing.
Click to expand...
Click to collapse
Nah they said that after they install the part,, before, they told me the price and that they can fix it. So $60 + $150 = $210 ouch!! thats what i was afraid of im willing to sell it or exchange it for another one with someone but anyway i still have hope on a dev to make this happend for the i747 there is a lot of devices that can root without a computer
Sent from my useless no data sync gs3
smallyetzon said:
Nah they said that after they install the part,, before, they told me the price and that they can fix it. So $60 + $150 = $210 ouch!! thats what i was afraid of im willing to sell it or exchange it for another one with someone but anyway i still have hope on a dev to make this happend for the i747 there is a lot of devices that can root without a computer
Sent from my useless no data sync gs3
Click to expand...
Click to collapse
That ebay motherboard has everything working. All you would need to do is swapp out the motherboads.
(this is just connecting and disconnecting a few connectors)
its 150$ plus free shipping. its not bad and probably the cheapest if no one comes up with a way to root with out PC
I was putting a rom on my sprint galaxy s3 phone and i put the wrong rom. The rom wasnt for sprint phones. So now my phone wont turn on even when i press the volume home and power button. Is there any way to fix?
Yeah you can try this http://forum.xda-developers.com/showthread.php?p=43724690 which many have had success with. Or you can send it somewhere to have Jtag repair. Jtag will run you about 60 dollars the method I linked is free but you have to know what your doing. Since you bricked your device I'm not sure if you would be able to complete the steps needed. Good luck.
Sent from the future via Tapatalk 4
edfunkycold said:
yeah you can try this http://forum.xda-developers.com/showthread.php?p=43724690 which many have had success with. Or you can send it somewhere to have jtag repair. Jtag will run you about 60 dollars the method i linked is free but you have to know what your doing. Since you bricked your device i'm not sure if you would be able to complete the steps needed. Good luck.
sent from the future via tapatalk 4
Click to expand...
Click to collapse
thanks ill give it a try.
sflecha35 said:
thanks ill give it a try.
Click to expand...
Click to collapse
That method is supposed to work but it didn't for me I had to get a jtag
Sent from my SPH-L710 using xda app-developers app
idontknowmang said:
that method is supposed to work but it didn't for me i had to get a jtag
sent from my sph-l710 using xda app-developers app
Click to expand...
Click to collapse
yeah it didnt work for me either im also getting a jtag repair
sflecha35 said:
yeah it didnt work for me either im also getting a jtag repair
Click to expand...
Click to collapse
Its a sure way to go. If the memory is corrupt it takes a bit longer they had my s3 for 2 days
Sent from my SPH-L710 using xda app-developers app