hello i got a problem with my htc desire trying instal android and i had a error
BRAVO PVT3 SHIP S-ON
HBOOT-1.02.0001
RADIO-5.17.05.23
DATE
RUU
Parsing...[downloaded ZIP]
[1] RADIO-V2 - Fail-PU
and thats a problem
(SPLASH RECOVERY SPLASH2 RADIO_CUST BOOTLOADER USERDATA SYSTEM BOOT) OK
now when i turning on my htc i can just see to HTC and in corners are warning signs i don't known how to fix it i tried couple roms in some of them is signature updates problem
THANKS FOR ANY HELP!!!
and sorry for my english
Mazthalion said:
hello i got a problem with my htc desire trying instal android and i had a error
BRAVO PVT3 SHIP S-ON
HBOOT-1.02.0001
RADIO-5.17.05.23
DATE
RUU
Parsing...[downloaded ZIP]
[1] RADIO-V2 - Fail-PU
and thats a problem
(SPLASH RECOVERY SPLASH2 RADIO_CUST BOOTLOADER USERDATA SYSTEM BOOT) OK
now when i turning on my htc i can just see to HTC and in corners are warning signs i don't known how to fix it i tried couple roms in some of them is signature updates problem
THANKS FOR ANY HELP!!!
and sorry for my english
Click to expand...
Click to collapse
The Fail_PU is sign of a radio brick. A radio brick is difficult to overcome. Few phones get rescued from this state.
First, try the 2.3 RUU a couple of times:
http://www.htcdev.com/process/legal_download/152
If it doesn't work, try putting the phone in the freezer for 10 minutes with the battery taken out, and then imediatelly try the RUU.
If those don't work, then you will have to try to flash a lot of wwe RUUs from here: http://www.shipped-roms.com/?category=android&model=Bravo
Good luck!
Why should he put it in to the freezer? Did it work with less failures, when its cold?
Also from me: good luck!
humanshadow said:
Why should he put it in to the freezer? Did it work with less failures, when its cold?
Also from me: good luck!
Click to expand...
Click to collapse
It could be overheating. Trust me, I've seen Andu recommend this a lot and it seems to get the phone booted a decent amount of times.
Chromium_ said:
It could be overheating. Trust me, I've seen Andu recommend this a lot and it seems to get the phone booted a decent amount of times.
Click to expand...
Click to collapse
Ah Overheating makes Sense to me Thanks
Thx bro
Related
I have htc desire but know it is stuck on the htc logo with /!\ on the corners it will not enter recovery mode nor to the bootldr i tried to flash ruu but it tells me error[152]: image update error
and on phone
[1] bootloade - bypassed
[2] radio_v2 - ok
[3] radio_cust - ok
[4] boot - ok
[5] recovery - ok
[6] system - faild-pu
[7] userdata - ok
[8] splash1 - ok
[9] splash2 - ok
partition update fail!
update Fail1
what can i do to fix this my phone has s-off and it's rooted
Could it be you have cm7 or oxygen hboot with /system partition smaller than the rom needs?
if so as per the alpharev site, you need to fastboot flash the downgrader.img first as a hboot then RUU
do you have a custom hboot?
edit: rootsu beat me to it
elliottg61 said:
do you have a custom hboot?
edit: rootsu beat me to it
Click to expand...
Click to collapse
are you surprised? I seem to be answering this question about twice a day at the moment
rootSU said:
are you surprised? I seem to be answering this question about twice a day at the moment
Click to expand...
Click to collapse
not at all surprised haha, this forum seems to get more and more filled up with simple problems these days that could be avoided if people simply read up on things
rootSU said:
Could it be you have cm7 or oxygen hboot with /system partition smaller than the rom needs?
if so as per the alpharev site, you need to fastboot flash the downgrader.img first as a hboot then RUU
Click to expand...
Click to collapse
i had hd2 and sensation it is my first time to work with desire so how can i "fastboot flash the downgrader.img first as hboot"
Firstly, what Hboot have you got? Please give me every word and letter on the top 3 lines.
rootSU said:
Firstly, what Hboot have you got? Please give me every word and letter on the top 3 lines.
Click to expand...
Click to collapse
when i power on the device i get the htc logo with the /!\ markes i cant enter the bootloader using the power+volume down then i plug it in usb and unplug it i get this
alpharev cm7 r2
bravo pvt4 ship s-off
hboot-6.93.1002
microp-051d
touch panel-synt0101
radio-5.11.05.27
aug 10 2010, 17:52:18
RUU
ahhhhh I have a fix covered in my guide just read it.. .and comment something so it gets bumped upto the top and then everyone else can benefit from its goodness
Cool
Sent from my HTC Desire using XDA App
bortak said:
ahhhhh I have a fix covered in my guide just read it.. .and comment something so it gets bumped upto the top and then everyone else can benefit from its goodness
Click to expand...
Click to collapse
thanks my problem is resolved
Hello everybody,
I have a huge problem with my Desire : I cannot install any Ruu on it and I have the "error 152 : image update error". I tried and read many things but the probleme is that the phone is S-ON. So I cannot install a recovery image and cannot either access to the fastboot because I don't have one (I only have "RUU" on my screen).
So when I try to install the Ruu.exe I get this message :
BRAVO PVT1 SHIP S-ON
HBOOT-1.02.0001
MICROP-031d
TOUCH PANEL-SYNW0101
RADIO-5.11.05.27
RUU
[1] BOOT - OK
[2] BOOTLOADER - OK
[3] RADIO_v2 - Fail-PU
[4] RADIO_CUST -OK
[5] RECOVERY - OK
[6] SPLASH1 - OK
[7] SYSTEM - OK
[8] USERDATA - OK
Partition update fail!
Update Fail!
My phone image is the 2.29.405.7 one.
I really donn't k now what to do.
Thank you very much in advance.
Contact HTC. Looks like a radio brick and if it is only they can fix it. You were updating to 2.3.3 so this should be covered by warranty.
Sent from my HTC Desire using xda premium
HBOOT-1.02.0001
Click to expand...
Click to collapse
My phone image is the 2.29.405.7 one.
Click to expand...
Click to collapse
Then why do you have the new HBOOT which was in the Official DEVLEOPER 2.3 update ?
You need to use Revolutionary.io (root/s-off), then flash the downgrader from alpharev.nl and you can try an older RUU.
The phone needs to boot to s-off
Sent from my HTC Desire using xda premium
yup, phones bricked. Call HTC they *should* give you a new one.
Thank you for your replies.
I'm in Tunisia. I've bought it last year from France and my guarrantee is over
I cannot dot it with revolutionary because the pone is not detected but the computer even if my drivers are installed.
Should be a 2 year warranty but not sure if its from another country. You should contact HTC and see what they say
Sent from my HTC Desire using xda premium
Hmmm, with revolutionary.io you don't need to be booted AFAIK.
davebugyi said:
Hmmm, with revolutionary.io you don't need to be booted AFAIK.
Click to expand...
Click to collapse
yeah you do. Can't just do it from bootloader
I had the same problem after installing the RUU ROM on S-OFF Desire. I spent a solution for several days, so I will share if someone also solve the same problem I tried everything described above, but nothing helped. Finally it worked flash following versions Offic ROM download
ENJOY
i have a problem on my desire gsm
i cant boot it
i cant hboot it
all i get is htc sign whit exclamations marks in corners...
i dont know what to do
please help
haky1988 said:
i have a problem on my desire gsm
i cant boot it
i cant hboot it
all i get is htc sign whit exclamations marks in corners...
i dont know what to do
please help
Click to expand...
Click to collapse
Read bortaks guide in my sig, answer is there
Sent from my HTC Desire
I am trying to return my Desire to stock so that I can hand it down in the family, since i got a new GNex. while trying to run RUU during the radio flash, the phone vibrates multiple times and the RUU process fails.
Now am stuck with HTC logo and 4 "!" marks in the corners.
this is what i can see now...
this is what I see
AlphaRev Unlock (in pink)
BRAVO PVT4 SHIP S-OFF
HBOOT 6.93.9999
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO 5.17.05.23
Aug 10 2010, 17:52:19
RUU
Please help...thanks in advance
which RUU.exe did you use?
this one
RUU_Bravo_H3G_UK_1.22.771.1_Radio_32.36.00.28U_4.06.00.02_2_release_127568_signed
vmax007 said:
I am trying to return my Desire to stock so that I can hand it down in the family, since i got a new GNex. while trying to run RUU during the radio flash, the phone vibrates multiple times and the RUU process fails.
Now am stuck with HTC logo and 4 "!" marks in the corners.
this is what i can see now...
this is what I see
AlphaRev Unlock (in pink)
BRAVO PVT4 SHIP S-OFF
HBOOT 6.93.9999
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO 5.17.05.23
Aug 10 2010, 17:52:19
RUU
Please help...thanks in advance
Click to expand...
Click to collapse
have a look at the first sticky post at the top of the Q&A thread, i'm pretty sure it covers it
i did try the sticky thread... but i am not able to achieve S-ON even after flashing bravo_downgrader
Try the unsigned version of the RUU in this tread: http://forum.xda-developers.com/showthread.php?t=695667
If this doesn't work try one of the WWE versions.
EDIT: see also this thread, which discusses the same issue: http://forum.xda-developers.com/showthread.php?t=1191565
thanks for the quick replies...
i think i have moved a step forward.
Running a WWE RUU managed to move it to:
BRAVO PVT4 SHIP S-ON
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.11.05.27
Aug 10 2010,17:52:10
RUU
Running RUU again errors out saying bootloader errror...
why did you execute the RUU again?
because i couldnt do anything else .. #fml
[SOLVED]
Yaay solved the problem by downloading the android 2.3 upgrade RUU from htcdev site and now back to stock!! YES!
vmax007 said:
Yaay solved the problem by downloading the android 2.3 upgrade RUU from htcdev site and now back to stock!! YES!
Click to expand...
Click to collapse
sir I also was stuck with four '' ! '' marks. please tell me how did you solve this problem.
I'm in a real problem please help me.
thanks
Similar problem
vmax007 said:
Yaay solved the problem by downloading the android 2.3 upgrade RUU from htcdev site and now back to stock!! YES!
Click to expand...
Click to collapse
Hey guys, I had a HTC Desire that started working very strange. It was constantly freezing at the HTC logo (booting). After removing the battery for a few minutes, I could turn on the phone again. I tried rooting, it always failed. Then I tried installing 2.3 via HTC Dev official software. Followed all the instructions and had a RADIO_V2 - Fail PU. The RUU enters recovery mode: I unplug, remove battery for 3 seconds, then plug again and it runs the same procedure: RADIO_V2 - Fail PU again. I just tried 4x and nothing. The phone is bricked. If I try to boot holding volume down, it won't go to recovery, it just turns black with ! sign in all corners.
I am just afraid my Desire has some hardware problem, but in any case, now it is bricked. Any suggestions?
racery said:
Hey guys, I had a HTC Desire that started working very strange. It was constantly freezing at the HTC logo (booting). After removing the battery for a few minutes, I could turn on the phone again. I tried rooting, it always failed. Then I tried installing 2.3 via HTC Dev official software. Followed all the instructions and had a RADIO_V2 - Fail PU. The RUU enters recovery mode: I unplug, remove battery for 3 seconds, then plug again and it runs the same procedure: RADIO_V2 - Fail PU again. I just tried 4x and nothing. The phone is bricked. If I try to boot holding volume down, it won't go to recovery, it just turns black with ! sign in all corners.
I am just afraid my Desire has some hardware problem, but in any case, now it is bricked. Any suggestions?
Click to expand...
Click to collapse
You can now use your desire as a very expenive mirror.
Boot / flash recovery
racery said:
Hey guys, I had a HTC Desire that started working very strange. It was constantly freezing at the HTC logo (booting). After removing the battery for a few minutes, I could turn on the phone again. I tried rooting, it always failed. Then I tried installing 2.3 via HTC Dev official software. Followed all the instructions and had a RADIO_V2 - Fail PU. The RUU enters recovery mode: I unplug, remove battery for 3 seconds, then plug again and it runs the same procedure: RADIO_V2 - Fail PU again. I just tried 4x and nothing. The phone is bricked. If I try to boot holding volume down, it won't go to recovery, it just turns black with ! sign in all corners.
I am just afraid my Desire has some hardware problem, but in any case, now it is bricked. Any suggestions?
Click to expand...
Click to collapse
Download a recovery img for the phone, plug it in and run 'fastboot boot [recovery.img]' to boot into recovery or 'fastboot flash recovery [recovery.img] to flash and then boot into recovery.
tjsantos said:
Download a recovery img for the phone, plug it in and run 'fastboot boot [recovery.img]' to boot into recovery or 'fastboot flash recovery [recovery.img] to flash and then boot into recovery.
Click to expand...
Click to collapse
If radio bricks were that easy to solve, then this would be a better world.
hello
i am sorry i think i repeat the topic, but i'm new here, and i have learned the topics talking about my problem, i even seen Bortak's guide, but i did not get what i want,
please listen to me, my problem on my DESIRE is the black screen, and the four triangles, the message i recieve when i put and pull the usb cable on pc is the next :
BRAVO PVT1 SHIP S-ON
HBOOT-1.02.0001
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.11.05.27
JUL 22 2011.16.19.16
RUU
so if you see, on Bortak's guide, i'm on S-ON, but i can't create the goldcard because my phone can't wake up,
so how can i solve this problem please ?
ps : i could not download the : HTC DESIRE FLASHER from Bortak's guide, so please if someone helps me and give me a direct link to download it
also i'm sorry for my BAD ENGLISH !
Start here...
http://forum.xda-developers.com/showthread.php?p=17829936
Sent from my HTC One using Tapatalk 4 Beta
i have seen this, my problem is situated in (4) S-ON, and i need to create goldcard, but i can't because the phone doesn't work at all, it's stuck, so what should i do ?
sorry for the double reply, but after trying this : RUU_Bravo_Froyo_HTC_WWE_2_29_405_5_Radio_32_49_00_32U_5_11_05_27_release_159811_signed
it tells me that the update was corrupted for some reasons, and my phone after the update shows me this :
BRAVO PVT1 SHIP S-ON
HBOOT-1.02.0001
MICROP-031d
touch panel-synt0101
radio-5.11.05.27
Jul 22 2011,16:19:16
RUU
parsing...[downloaded ZIP]
[1] BOOTLOADER - Bypassed
[2] RADIO_V2
[3] RADIO_CRUST - OK
[4] BOOT - OK
[5] RECOVERY - OK
[6] SYSTEM - OK
[7] USERDATA - OK
[8] SPLASH1 - OK
[9] SPLASH2 - OK
Partition update fail!
Update Fail !
so what should i do ? i said it again i cannot do GOLDCARD ! so BORTAK'S GUIDE WILL NOT HELP ME I THINK
so please help me guys
chegue4 said:
sorry for the double reply, but after trying this : RUU_Bravo_Froyo_HTC_WWE_2_29_405_5_Radio_32_49_00_32U_5_11_05_27_release_159811_signed
it tells me that the update was corrupted for some reasons, and my phone after the update shows me this :
BRAVO PVT1 SHIP S-ON
HBOOT-1.02.0001
MICROP-031d
touch panel-synt0101
radio-5.11.05.27
Jul 22 2011,16:19:16
RUU
parsing...[downloaded ZIP]
[1] BOOTLOADER - Bypassed
[2] RADIO_V2
[3] RADIO_CRUST - OK
[4] BOOT - OK
[5] RECOVERY - OK
[6] SYSTEM - OK
[7] USERDATA - OK
[8] SPLASH1 - OK
[9] SPLASH2 - OK
Partition update fail!
Update Fail !
so what should i do ? i said it again i cannot do GOLDCARD ! so BORTAK'S GUIDE WILL NOT HELP ME I THINK
so please help me guys
Click to expand...
Click to collapse
Try flashing the 2.3 RUU.
http://www.htcdev.com/process/legal_download/152
yes that's what i did, i tried with this ROM and it shows me the message that i wrote !
chegue4 said:
yes that's what i did, i tried with this ROM and it shows me the message that i wrote !
Click to expand...
Click to collapse
You know there's a difference between the RUU you wrote you used (RUU_Bravo_Froyo_HTC_WWE) and the 2.3 RUU, right?
but the link that you gave me is the same that i used and i downloaded it, and flashed with it, didn't it ?
After using the link you sent me, and flashed with it i get ERROR 152 IMAGE UPDATE ERROR
The ROM Update Utility cannot update your android phone
Please get the correct ROM Update Utility and try again
ps : when i'm flashing it, always when it comes to flash the radio, the green bar on the phone became RED! and after that it returns green, so the problem always on updating RADIO !! so what should i do ?
chegue4 said:
After using the link you sent me, and flashed with it i get ERROR 152 IMAGE UPDATE ERROR
The ROM Update Utility cannot update your android phone
Please get the correct ROM Update Utility and try again
ps : when i'm flashing it, always when it comes to flash the radio, the green bar on the phone became RED! and after that it returns green, so the problem always on updating RADIO !! so what should i do ?
Click to expand...
Click to collapse
What does it say when flashing the radio? Does it say it failed?
abaaaabbbb63 said:
What does it say when flashing the radio? Does it say it failed?
Click to expand...
Click to collapse
i don't know how to flash radio alone, and what file to use for flashing radio itself alone without flashing ROM !! i guess it should be done by using ANDROID FLASHER, but i don't know how, i just tried to flash all the ROM
chegue4 said:
i don't know how to flash radio alone, and what file to use for flashing radio itself alone without flashing ROM !! i guess it should be done by using ANDROID FLASHER, but i don't know how, i just tried to flash all the ROM
Click to expand...
Click to collapse
No, I mean, what did it say when the RUU tried to flash the radio? In the post where you wrote the RUU log, you didn't write anything after "Radio v2". Did it say "OK", or "Fail"
OH I'm sorry, i forgot to mention it, it says FAIL-pu
chegue4 said:
OH I'm sorry, i forgot to mention it, it says FAIL-pu
Click to expand...
Click to collapse
Well, next time don't forget. It's the most important detail.
You have a radio brick. I'm afraid that you will have to struggle to unbrick your phone. You'll have to endlessly flash RUU's until one of them succeeds in flashing the radio.
There's no other known way
no problem, so you mean i should try all RUU"s on this forum till one of them work ?? that's it my friend ???
chegue4 said:
no problem, so you mean i should try all RUU"s on this forum till one of them work ?? that's it my friend ???
Click to expand...
Click to collapse
Well, try all the WWE RUU's from here:
http://www.shipped-roms.com/index.php?category=android&model=Bravo
Remember, you must try each one more than once. This is a matter of chance and luck.
Insist on the 2.3 RUU.
i am trying RUU_Bravo_Froyo_HTC_WWE_2_29_405_5_Radio_32_49_00_32U_5_11_05_27_release_159811_signed
when it reached about 24 % the phone vibrates two times, and it stucks on 26% on the status bar of the flashing, on 'upgrade radio'
it's still frozen on 26% should i wait for that ?? or unplug the usb and try with the same ROM,
because it's the first time that it vibrates !
after a weeks in the repair of its death, my phone now turns on, but still the problem of the frozen screen with htc logo, and four triangles
with this :
BRAVO PVT1 SHIP S-ON
HBOOT-1.02.0001
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.11.05.27
JUL 22 2011.16.19.16
so still no solution for an S-ON phone ?? i tried a lot of RUU's and now one worked for me
These are the only ifo i have for my phone
BRAVO PVT4 SHIP S-ON
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.11.05.27
i try to flash rom some time ruu flash done and some time show error
Radio_V2 - Fail PU during upgrading
i need help how solve that problem
imeicodes said:
These are the only ifo i have for my phone
BRAVO PVT4 SHIP S-ON
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.11.05.27
i try to flash rom some time ruu flash done and some time show error
Radio_V2 - Fail PU during upgrading
i need help how solve that problem
Click to expand...
Click to collapse
The Fail_PU is sign of a radio brick. A radio brick is difficult to overcome. Few phones get rescued from this state.
First, try the 2.3 RUU a couple of times:
http://www.htcdev.com/process/legal_download/152
If it doesn't work, try putting the phone in the freezer for 10 minutes with the battery taken out, and then imediatelly try the RUU.
If those don't work, then you will have to try to flash a lot of wwe RUUs from here: http://www.shipped-roms.com/?category=android&model=Bravo
Good luck!
thanks for reply brother
i did flashing done but still same condition i try 3 different firmware but there is no positive result
brother after successfully installed GB 2.3 now phone show htc logo and restart whats next
Thanks In advance
imeicodes said:
brother after successfully installed GB 2.3 now phone show htc logo and restart whats next
Thanks In advance
Click to expand...
Click to collapse
Try the freezer trick that Andu explained above.
Sent using xda-developers app
Chromium_ said:
Try the freezer trick that Andu explained above.
Sent using xda-developers app
Click to expand...
Click to collapse
phone flashed successful now phone full powered on and again restart
//edit: how did i post here? weird