Hello everybody,
I have a huge problem with my Desire : I cannot install any Ruu on it and I have the "error 152 : image update error". I tried and read many things but the probleme is that the phone is S-ON. So I cannot install a recovery image and cannot either access to the fastboot because I don't have one (I only have "RUU" on my screen).
So when I try to install the Ruu.exe I get this message :
BRAVO PVT1 SHIP S-ON
HBOOT-1.02.0001
MICROP-031d
TOUCH PANEL-SYNW0101
RADIO-5.11.05.27
RUU
[1] BOOT - OK
[2] BOOTLOADER - OK
[3] RADIO_v2 - Fail-PU
[4] RADIO_CUST -OK
[5] RECOVERY - OK
[6] SPLASH1 - OK
[7] SYSTEM - OK
[8] USERDATA - OK
Partition update fail!
Update Fail!
My phone image is the 2.29.405.7 one.
I really donn't k now what to do.
Thank you very much in advance.
Contact HTC. Looks like a radio brick and if it is only they can fix it. You were updating to 2.3.3 so this should be covered by warranty.
Sent from my HTC Desire using xda premium
HBOOT-1.02.0001
Click to expand...
Click to collapse
My phone image is the 2.29.405.7 one.
Click to expand...
Click to collapse
Then why do you have the new HBOOT which was in the Official DEVLEOPER 2.3 update ?
You need to use Revolutionary.io (root/s-off), then flash the downgrader from alpharev.nl and you can try an older RUU.
The phone needs to boot to s-off
Sent from my HTC Desire using xda premium
yup, phones bricked. Call HTC they *should* give you a new one.
Thank you for your replies.
I'm in Tunisia. I've bought it last year from France and my guarrantee is over
I cannot dot it with revolutionary because the pone is not detected but the computer even if my drivers are installed.
Should be a 2 year warranty but not sure if its from another country. You should contact HTC and see what they say
Sent from my HTC Desire using xda premium
Hmmm, with revolutionary.io you don't need to be booted AFAIK.
davebugyi said:
Hmmm, with revolutionary.io you don't need to be booted AFAIK.
Click to expand...
Click to collapse
yeah you do. Can't just do it from bootloader
I had the same problem after installing the RUU ROM on S-OFF Desire. I spent a solution for several days, so I will share if someone also solve the same problem I tried everything described above, but nothing helped. Finally it worked flash following versions Offic ROM download
ENJOY
i have a problem on my desire gsm
i cant boot it
i cant hboot it
all i get is htc sign whit exclamations marks in corners...
i dont know what to do
please help
haky1988 said:
i have a problem on my desire gsm
i cant boot it
i cant hboot it
all i get is htc sign whit exclamations marks in corners...
i dont know what to do
please help
Click to expand...
Click to collapse
Read bortaks guide in my sig, answer is there
Sent from my HTC Desire
Related
I have htc desire but know it is stuck on the htc logo with /!\ on the corners it will not enter recovery mode nor to the bootldr i tried to flash ruu but it tells me error[152]: image update error
and on phone
[1] bootloade - bypassed
[2] radio_v2 - ok
[3] radio_cust - ok
[4] boot - ok
[5] recovery - ok
[6] system - faild-pu
[7] userdata - ok
[8] splash1 - ok
[9] splash2 - ok
partition update fail!
update Fail1
what can i do to fix this my phone has s-off and it's rooted
Could it be you have cm7 or oxygen hboot with /system partition smaller than the rom needs?
if so as per the alpharev site, you need to fastboot flash the downgrader.img first as a hboot then RUU
do you have a custom hboot?
edit: rootsu beat me to it
elliottg61 said:
do you have a custom hboot?
edit: rootsu beat me to it
Click to expand...
Click to collapse
are you surprised? I seem to be answering this question about twice a day at the moment
rootSU said:
are you surprised? I seem to be answering this question about twice a day at the moment
Click to expand...
Click to collapse
not at all surprised haha, this forum seems to get more and more filled up with simple problems these days that could be avoided if people simply read up on things
rootSU said:
Could it be you have cm7 or oxygen hboot with /system partition smaller than the rom needs?
if so as per the alpharev site, you need to fastboot flash the downgrader.img first as a hboot then RUU
Click to expand...
Click to collapse
i had hd2 and sensation it is my first time to work with desire so how can i "fastboot flash the downgrader.img first as hboot"
Firstly, what Hboot have you got? Please give me every word and letter on the top 3 lines.
rootSU said:
Firstly, what Hboot have you got? Please give me every word and letter on the top 3 lines.
Click to expand...
Click to collapse
when i power on the device i get the htc logo with the /!\ markes i cant enter the bootloader using the power+volume down then i plug it in usb and unplug it i get this
alpharev cm7 r2
bravo pvt4 ship s-off
hboot-6.93.1002
microp-051d
touch panel-synt0101
radio-5.11.05.27
aug 10 2010, 17:52:18
RUU
ahhhhh I have a fix covered in my guide just read it.. .and comment something so it gets bumped upto the top and then everyone else can benefit from its goodness
Cool
Sent from my HTC Desire using XDA App
bortak said:
ahhhhh I have a fix covered in my guide just read it.. .and comment something so it gets bumped upto the top and then everyone else can benefit from its goodness
Click to expand...
Click to collapse
thanks my problem is resolved
Hi,
Help ! Help ! My HTC DESIRE is stuck on black screen with HTC logo and /!\ in the 4 corners after i tried to upgrade to Android 2.3 with the RUU downloaded from HTC web site (htcdev.com/devcenter/downloads). The upgrade looks like it run correctly but at the end I have the following error :
ERROR [152] : IMAGE UPDATE ERROR
The ROM update utility cannot update your Android Phone
Please get the correct ROM Update Utility and try again.
After recovery when i remove the USB cable i have the following screen on my DESIRE:
BRAVO PVT1 SHIP S-ON
HBOOT-1.02.0001
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.17.05.23
Jul 22 2001,16:19:16
RUU
Parsing...[downloaded ZIP]
[1] RADIO_V2 - OK
[2] SPLASH1 - OK
[3] RECOVERY - OK
[4] SPLASH2 - Fail-PU
[5] RADIO_CUST - OK
[6] BOOTLOADER - OK
[7] USERDATA - OK
[8] SYSTEM - OK
[9] BOOT - OK
Partition update fail!
Update Fail!
I tried to download RUU again and tried on an other PC nothing change. My previous ROM was 2.209.405.2, tried to install it again but still same issue. I did not do any customization on my desire, just removed the branded ROM Orange last year to upgrade to froyo 2.209.405.2 with the gold card method.
I’m novice so really don’t know what do to.
Thanks in advance for any help.
Vince
Failed splash screen update? Strange.
Now you can use revolutionary.io to root/s-off and try an older RUU.
Thanks is there a tutorial somewhere ? Really don't want to brick my phone.
all you need to know is on http://revolutionary.io
davebugyi said:
Failed splash screen update? Strange.
Now you can use revolutionary.io to root/s-off and try an older RUU.
Click to expand...
Click to collapse
rootSU said:
all you need to know is on http://revolutionary.io
Click to expand...
Click to collapse
but he's on the /!\ screen so revo won't work since he needs to be booted into the system
So what to do ? 4 days i'm browsing forums and no idea.
What is/was your splash screen? Maybe an orange branded one?
Can you boot into fastboot?
I previously removed the Branded Orange ROM, so i don't think it was an ORANGE Splash. I think i can boot into fastboot, but not that sure since i'm really a novice.
Can you please explain to me ?
Thanks
I'm pretty sure OP is screwed.
Fastboot won't do jack all - He's S-ON (also, he is stuck in RUU mode [exactly the same as fastboot]).
No other RUU will work because there is no newer o.ne than the 2.3.3 one - therefore unless that works he's still screwed
Even if he could boot recovery, he can't flash anything because it's the stock one.
He can't boot, therefore he can't root or S-OFF.
Sorry, but this is case closed. Send it to HTC.
I think I am stuffed as well.
I was preparing my desire for sale. Was running Blissymeade rom by coolexe. Brill
I wiped all my back ups, uninstalled all my downloaded apps
wiped all partitions and davelick
Formated and repartitioned Sd card
Bliisy meade would not boot just kept rebooting the white HTC screen
No probs (I thought) just take it back to stock
I have tried 3 RUU and all say the same Get the correct rom update utility and try again
Now I am stuck on the Black HTC screen with a ! in each corner
I cant acess the SD card except by putting it in the PC
I cant get into recovery or anything else
I did manage to get :-
AlphaRev CM7 r2
Bravo PVT4 Ship s-OFF
HBoot -6.93.1002
Microcrop-051d
Touch Panel-synt0101
Radio-5.11.05.27
Aug 10 2010,17:5218
RUU
[1] Bootloader - Bypassed
[2] Radio_V2 - OK
[3] Radio_cust _ OK
[4] Boot _ OK
[5] Recovery _ OK
[6] System _ Fail-PU
[7] Userdata _ OK
[8] Splash1 _ OK
[9] Splash2 _ OK
Partition update fail
Update fail!
Error [152] Image Error
Any ideas help would be gratefully recieved.
Many thanks
duryard said:
I think I am stuffed as well.
I was preparing my desire for sale. Was running Blissymeade rom by coolexe. Brill
I wiped all my back ups, uninstalled all my downloaded apps
wiped all partitions and davelick
Formated and repartitioned Sd card
Bliisy meade would not boot just kept rebooting the white HTC screen
No probs (I thought) just take it back to stock
I have tried 3 RUU and all say the same Get the correct rom update utility and try again
Now I am stuck on the Black HTC screen with a ! in each corner
I cant acess the SD card except by putting it in the PC
I cant get into recovery or anything else
I did manage to get :-
AlphaRev CM7 r2
Bravo PVT4 Ship s-OFF
HBoot -6.93.1002
Microcrop-051d
Touch Panel-synt0101
Radio-5.11.05.27
Aug 10 2010,17:5218
RUU
[1] Bootloader - Bypassed
[2] Radio_V2 - OK
[3] Radio_cust _ OK
[4] Boot _ OK
[5] Recovery _ OK
[6] System _ Fail-PU
[7] Userdata _ OK
[8] Splash1 _ OK
[9] Splash2 _ OK
Partition update fail
Update fail!
Error [152] Image Error
Any ideas help would be gratefully recieved.
Many thanks
Click to expand...
Click to collapse
did you use the 2.3.3 RUU as well? If you DIDN'T then check my guide.
Thanks for the quick reply bortak could you point me at a 2.3.3 ruu please to try. Reading your excellant guide now
duryard said:
Thanks for the quick reply bortak could you point me at a 2.3.3 ruu please to try. Reading your excellant guide now
Click to expand...
Click to collapse
nooooo don't use it!!!!!!! I was asking if you used it, since you posted on this thread
Also Erroe 152 just means you got the "wrong" RUU (that's what it thinks anyway) it can be easily bypassed with a goldcard. Everything you need to know is on my guide soo..
Ok
I have got recovery installed now but when I reboot the phone it still goes back to HTC black screen with ! in all corners
I am try ruu RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed
I have to flash recovery evrey time to get in to it done all the formating stuff installed blissy meade but still back to HTC black screen with !
duryard said:
Ok
I have got recovery installed now but when I reboot the phone it still goes back to HTC black screen with ! in all corners
I am try ruu RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed
I have to flash recovery evrey time to get in to it done all the formating stuff installed blissy meade but still back to HTC black screen with !
Click to expand...
Click to collapse
What are you talking about? lol what are you even trying to do.. recovery has nothing to do with using a RUU...
all you need to do is plug the phone in via usb and run the RUU from your pc..
you need a goldcard so you don't get error 152. Easy
The Black HTC screen was put there by the RUU not working
I can use android flasher to install recovery but every time I reboot it just goes back to the Black HTC screen With the ! in each corner. I then have to reflash recovery with android flasher to be able to get into clockwork recovrey. Trying to install cyangenmod now
Running RUU while you're on CM7r2 hboot isn't smart, just sayin.
I think thats the problem but I am not sure how to take it back to stock
bortak said:
nooooo don't use it!!!!!!!
Click to expand...
Click to collapse
Stop with that paranoid **** already, will ya? You sound like old vinyl plate! Learn a new tune.
Terepin said:
Stop with that paranoid **** already, will ya? You sound like old vinyl plate! Learn a new tune.
Click to expand...
Click to collapse
okay let me put it this way. A) You use a failsafe method that you KNOW works and offers you alternatives if things go wrong B) You use a method which has a high failure rate and is unfixable if something goes wrong...
Hmmmmmmmm HARD choice... haaaarrdd chooiiccceeee....
---------- Post added at 05:10 PM ---------- Previous post was at 05:09 PM ----------
k3lcior said:
Running RUU while you're on CM7r2 hboot isn't smart, just sayin.
Click to expand...
Click to collapse
Whoops! just noticed that
duryard said:
I think thats the problem but I am not sure how to take it back to stock
Click to expand...
Click to collapse
it is. use android flasher to flash the "bravo stock" hboot and re-do the ruu
Hi all,
I have a big problem with my desire. I was unable to start my desire (S-ON, never rooted) so I have decided to downlod RUU:
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed.exe
booted in fastboot with vol- + power and ran the above file but the process has failed so I had to reboot and since that moment I don't have fastboot menu anymore and I just see the 4 triangles screen. I can still connect phone to PC (windows 7) and run RUU file but everytime it fails with 152 error and "Radio_V2 Fail-PU" error (I can see the RUU process when I disconnect the USB cable, when I connect the cable again the RUU disappear and I see again the black screen with HTC and 4 triangles). I have also tried RUU_HTC Desire Android 2.3 Upgrade (Gingerbread).exe but no lucks.
Any suggestion on how to get my desire working again?
any help is really really appreciated,
many thanks
Already checked bortak's troubleshooting guide (see my sig).
Sent from my HTC Desire using Tapatalk
MatDrOiD said:
Already checked bortak's troubleshooting guide (see my sig).
Sent from my HTC Desire using Tapatalk
Click to expand...
Click to collapse
Thanks for your response. I have followed the guide above, point "[4]RUU PROBLEMS", S-ON solution, but I still cannot flash the RUU. I am stuck on HTC logo with "4" triangles and I get always the same error:
[1] BOOTLOADER - OK
[2] RADIO_V2 - FAIL-PU
[3] RADIO_CUST - OK
[4] BOOT - OK
[5] RECOVERY - OK
[6] SYSTEM - OK
[7] USERDATA - OK
[8] SPLASH1 - OK
[9] SPLASH2 - OK
Partition update fail!
Update Fail!
Here are the information I get if I disconnect the USB cable (it seems to be stuck in RUU mode):
BRAVO PVT1 SHIP S-ON
HBOOT-1.02.0001
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.11.05.27
Jul 22 2011.16:19:16
RUU
Please help me!
Any suggestion? it is an hardware problem?
thanks
Seems like radio-brick which is currently unfixable.
Which RUU did you try to flash?
Sent from my HTC Desire using Tapatalk
MatDrOiD said:
Seems like radio-brick which is currently unfixable.
Which RUU did you try to flash?
Sent from my HTC Desire using Tapatalk
Click to expand...
Click to collapse
I tried this:
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00. 32U_5.11.05.27_release_159811_signed.exe
but no luck.
Any suggestion? could I try to use revolutionary in order to have access to the recovery once again? other ideas?
Try 2.3.3 RUU from htcdev.com.
have you been sucessful? i have the same problem, with an originally vodafone branded device.
now I'm:
BRAVO PVT1 SHIP S-ON
HBOOT-1.02.0001
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.17.05.08
Jul 22 2011.16:19:16
RUU files fail with different errors and "Radio_V2 Fail-PU" error.
also Black screen and fancy triangles etc....
Goldcard is created and in place, but still couldn't use the WWE RUU...
Is it a complete brick? Is it confirmed that "radio-brick which is currently unfixable."??
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed
gives me ERROR [140]: BOOTLOADER-VERSION-ERROR
RUU_Bravo_Froyo_Vodafone_UK_2.33.161.2_Radio_32.49.00.32U_5.11.05.27_release_157522_signed
gives me ERROR [152]: IMAGE-UPDATE-ERROR
RUU_HTC Desire Android 2.3 Upgrade (Gingerbread)
gives me ERROR [152]: IMAGE-UPDATE-ERROR
I feel like troubleshootin'-Putin already, because I'm on it since 7 hours and there don't seem to be a solution!
Guess what - i have the exact same problem!
However if i go through the recovery procedure, sometimes the Radio image flashes ok, however during boot up, the phone is stuck on the htc white start up screen. If i flash the RUU again, i end up with the radio error.
HELP!!!
ardsar said:
Guess what - i have the exact same problem!
However if i go through the recovery procedure, sometimes the Radio image flashes ok, however during boot up, the phone is stuck on the htc white start up screen. If i flash the RUU again, i end up with the radio error.
HELP!!!
Click to expand...
Click to collapse
please tell (and how) if you are successful!!
i got exactly the same problem! has anyone any idea how to solve this?
thx
mtbiker_kev said:
i got exactly the same problem! has anyone any idea how to solve this?
thx
Click to expand...
Click to collapse
Radio-bricks are currently unfixable. Unless one can flash 2.3.3 RUU, which is the last hope.
Tried 2.3.3 RUU but nothing changed...I have tried everything I can think of!
I pulled my old Desire out of a draw yesterday as I need it as a test device - Exactly the same situation with RADIO_V2 - FAIL-PU
I've tried so many different RUUs, but all fail... Stumped after hours and hours of messing and searching.
If anyone manages to resolve this without returning to HTC, please do post!
same here...
alas
also have same problem
tried all...
also posted about it here
no go....
hope someone can fix this..
funny thing is :
was using botrak's troubleshooting guide
and it was there that was suggested to flash android 2.3 gingerbread ruu
i think that should be mentioned to be condemned
because once you flash that you can NOT downgrade again if anything goes wrong
as is obvious from our cases!!
really hope someone cracks this!
fastboot oem boot <- That command boots the phone friends.
htc inspire has black screen with white triangles
ledzgio said:
Hi all,
I have a big problem with my desire. I was unable to start my desire (S-ON, never rooted) so I have decided to downlod RUU:
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed.exe
booted in fastboot with vol- + power and ran the above file but the process has failed so I had to reboot and since that moment I don't have fastboot menu anymore and I just see the 4 triangles screen. I can still connect phone to PC (windows 7) and run RUU file but everytime it fails with 152 error and "Radio_V2 Fail-PU" error (I can see the RUU process when I disconnect the USB cable, when I connect the cable again the RUU disappear and I see again the black screen with HTC and 4 triangles). I have also tried RUU_HTC Desire Android 2.3 Upgrade (Gingerbread).exe but no lucks.
Any suggestion on how to get my desire working again?
any help is really really appreciated,
many thanks
Click to expand...
Click to collapse
hi guys, im having the same problem with my htc inspire 4g im stuck and dont know what to do, can u plz help:crying:
jwijnaldum said:
hi guys, im having the same problem with my htc inspire 4g im stuck and dont know what to do, can u plz help:crying:
Click to expand...
Click to collapse
try posting in htc inspire 4g section
Sorry guys, service best of ur luck. My desire got this for triangles before but it is not of radio brick, it is that I've got cm7r2 hboot.....
Sent from my HTC Desire using xda app-developers app
---------- Post added at 09:29 AM ---------- Previous post was at 09:23 AM ----------
You can try flashing an individual standalone radio image from those that rom cookers provide in dev thread
Sent from my HTC Desire using xda app-developers app
For anyone who is looking for the solution or a similiar one.. just install all the drivers on the net for the htc desire (at least i installed everything i could find). Go to htcdev.com website, register for free, and get a copy of the ruu for desire gingerbread. Attach the phone to the pc, turn it on, wait until the pc recognizes the phone and get the ruu_xxx.exe running. Solved!
Hope I came useful to some one.
Another way: Relock bootloader
PHP:
fastboot oem lock
and then install the corect RUU
Hello!
Guys... I have a big dilema. Im with my HTC G7/Bravo stuk at HTC Logo + 4 /!\ in coners.
I have read this forum till i was sick. And i still havent find nothing ( a tutorial ).
Configuration of the phone: |
"BRAVO PVT1 SHIP S-ON |
HBOOT - 1.02.0001 |
MICROP - 031D | This is happening when i pull out the USB cable
TOUCH PANEL - SYNT0101 |
RADIO - 5.11.05.27 |
Jul 22 2011, 16:19:16 |
I tried to flash with this "RUU_HTC Desire Android 2.3 Upgrade (Gingerbread).exe"
But at 82% im gettin Error 152 and the screan from HTC is showing me this:
"RUU
Parsing ... [ downloaded zip ]
[1] RADIO_V2 - Fail-PU
the rest ar ok
Partition update fail!
Update fail! "
So ... can anyone help me with this thing ?
Thank you in advance
spinky360 said:
I have read this forum till i was sick. And i still havent find nothing ( a tutorial ).
Click to expand...
Click to collapse
You telling us you didn't manage to find a tutorial two threads above this one??
Sent from my HTC Desire using Tapatalk 2
spinky360 said:
I have read this forum till i was sick. And i still havent find nothing ( a tutorial ).
Click to expand...
Click to collapse
Please for the love of god tell me you're joking.
Guys ... not that i havent find nothing. But i nothing is working for me!
what about bortak's guide? all sort of solutions there... btw you have radio brick... just one solution for radio brick HTC, SORRY
spinky360 said:
Hello!
Parsing ... [ downloaded zip ]
[1] RADIO_V2 - Fail-PU
the rest ar ok
Partition update fail!
Update fail! "
Click to expand...
Click to collapse
Doesn't look good. It seems you have yourself a dead phone.
kotag82 said:
what about bortak's guide? all sort of solutions there... btw you have radio brick... just one solution for radio brick HTC, SORRY
Click to expand...
Click to collapse
Hmm not ALWAYS. Try the 2.3 RUU, you can get it on my guide.
EDIT: My bad, already have 1.02 HBOOT. You can try again a couple of times, but no guarantee it will work.
SO ? I got a chance? to fix it ? or i have to take it to service wher they have box to fix it ?
try 2.3.3 ruu from htcdev.com or from bortak's guide a couple of times as bortak said, hopefuuly it may sort it out but I have a doubt it will not... It is a very long shot
can you check something for me? try to boot phone to fastboot power+back, then select bootloader and tell me if it is looking for pb99img file
kotag82 said:
try 2.3.3 ruu from htcdev.com or from bortak's guide a couple of times as bortak said, hopefuuly it may sort it out but I have a doubt it will not... It is a very long shot
can you check something for me? try to boot phone to fastboot power+back, then select bootloader and tell me if it is looking for pb99img file
Click to expand...
Click to collapse
I cant eneter in no menu:
Volum up + Power = In HTC Loggo + 4 /!\
Volum Down + Power = The same
Back Key + Power = The same
But if im puting it in USB is showing me the HTC LOGO and if im pulling out is showing me this:
"BRAVO PVT1 SHIP S-ON
HBOOT - 1.02.0001
MICROP - 031D
TOUCH PANEL - SYNT0101
RADIO - 5.11.05.27
Jul 22 2011, 16:19:16
RUU
There is no go with this... Tried ruu a couple of times? If that is not working unfortunately dead end
Sent from my HTC Sensation Z710e using XDA Premium App
soome times is geting stuk at 59% but all the time at 82% is ding ... Any hope except HTC? With jtag ? will work ? or how can i downgrade / upgrade boot ?
possibly... I don't know...
no higher hboot than 1.02
kotag82 said:
possibly... I don't know...
no higher hboot than 1.02
Click to expand...
Click to collapse
Can u give me some advices how, when, with what to do ? thank you. I will post today a movie how is reacting
Any progress?
Sent from my HTC Desire HD using XDA
Not at all nothink
With Android Flasher... Nothing happening
But with Normal Flasher from android is starting. Showing even on the screen,
If u know ther is a zip in the package -" rom.zip " in side u can find radi, hboot, bla,bla, bla. Have somebody implemented some files inside? Actualy is not a normal zip. The file is trange. I tryed to put a nother radio in that zip but wont let me boot it. If i can make smth like this will bee a way.
( i don like this in old HTC [ not android ]... and worked )
Thank You in advance.
1. i copied the rom.zip decompesd on microSd. Plug it in. - No error. After restart phone death. No signal on USB, no black ligth, no charging led no smallest reaction.
I think this thread shuld be close.!
Thank you once again for those who tryed to help me!
Keep gooing guys
hello
i am sorry i think i repeat the topic, but i'm new here, and i have learned the topics talking about my problem, i even seen Bortak's guide, but i did not get what i want,
please listen to me, my problem on my DESIRE is the black screen, and the four triangles, the message i recieve when i put and pull the usb cable on pc is the next :
BRAVO PVT1 SHIP S-ON
HBOOT-1.02.0001
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.11.05.27
JUL 22 2011.16.19.16
RUU
so if you see, on Bortak's guide, i'm on S-ON, but i can't create the goldcard because my phone can't wake up,
so how can i solve this problem please ?
ps : i could not download the : HTC DESIRE FLASHER from Bortak's guide, so please if someone helps me and give me a direct link to download it
also i'm sorry for my BAD ENGLISH !
Start here...
http://forum.xda-developers.com/showthread.php?p=17829936
Sent from my HTC One using Tapatalk 4 Beta
i have seen this, my problem is situated in (4) S-ON, and i need to create goldcard, but i can't because the phone doesn't work at all, it's stuck, so what should i do ?
sorry for the double reply, but after trying this : RUU_Bravo_Froyo_HTC_WWE_2_29_405_5_Radio_32_49_00_32U_5_11_05_27_release_159811_signed
it tells me that the update was corrupted for some reasons, and my phone after the update shows me this :
BRAVO PVT1 SHIP S-ON
HBOOT-1.02.0001
MICROP-031d
touch panel-synt0101
radio-5.11.05.27
Jul 22 2011,16:19:16
RUU
parsing...[downloaded ZIP]
[1] BOOTLOADER - Bypassed
[2] RADIO_V2
[3] RADIO_CRUST - OK
[4] BOOT - OK
[5] RECOVERY - OK
[6] SYSTEM - OK
[7] USERDATA - OK
[8] SPLASH1 - OK
[9] SPLASH2 - OK
Partition update fail!
Update Fail !
so what should i do ? i said it again i cannot do GOLDCARD ! so BORTAK'S GUIDE WILL NOT HELP ME I THINK
so please help me guys
chegue4 said:
sorry for the double reply, but after trying this : RUU_Bravo_Froyo_HTC_WWE_2_29_405_5_Radio_32_49_00_32U_5_11_05_27_release_159811_signed
it tells me that the update was corrupted for some reasons, and my phone after the update shows me this :
BRAVO PVT1 SHIP S-ON
HBOOT-1.02.0001
MICROP-031d
touch panel-synt0101
radio-5.11.05.27
Jul 22 2011,16:19:16
RUU
parsing...[downloaded ZIP]
[1] BOOTLOADER - Bypassed
[2] RADIO_V2
[3] RADIO_CRUST - OK
[4] BOOT - OK
[5] RECOVERY - OK
[6] SYSTEM - OK
[7] USERDATA - OK
[8] SPLASH1 - OK
[9] SPLASH2 - OK
Partition update fail!
Update Fail !
so what should i do ? i said it again i cannot do GOLDCARD ! so BORTAK'S GUIDE WILL NOT HELP ME I THINK
so please help me guys
Click to expand...
Click to collapse
Try flashing the 2.3 RUU.
http://www.htcdev.com/process/legal_download/152
yes that's what i did, i tried with this ROM and it shows me the message that i wrote !
chegue4 said:
yes that's what i did, i tried with this ROM and it shows me the message that i wrote !
Click to expand...
Click to collapse
You know there's a difference between the RUU you wrote you used (RUU_Bravo_Froyo_HTC_WWE) and the 2.3 RUU, right?
but the link that you gave me is the same that i used and i downloaded it, and flashed with it, didn't it ?
After using the link you sent me, and flashed with it i get ERROR 152 IMAGE UPDATE ERROR
The ROM Update Utility cannot update your android phone
Please get the correct ROM Update Utility and try again
ps : when i'm flashing it, always when it comes to flash the radio, the green bar on the phone became RED! and after that it returns green, so the problem always on updating RADIO !! so what should i do ?
chegue4 said:
After using the link you sent me, and flashed with it i get ERROR 152 IMAGE UPDATE ERROR
The ROM Update Utility cannot update your android phone
Please get the correct ROM Update Utility and try again
ps : when i'm flashing it, always when it comes to flash the radio, the green bar on the phone became RED! and after that it returns green, so the problem always on updating RADIO !! so what should i do ?
Click to expand...
Click to collapse
What does it say when flashing the radio? Does it say it failed?
abaaaabbbb63 said:
What does it say when flashing the radio? Does it say it failed?
Click to expand...
Click to collapse
i don't know how to flash radio alone, and what file to use for flashing radio itself alone without flashing ROM !! i guess it should be done by using ANDROID FLASHER, but i don't know how, i just tried to flash all the ROM
chegue4 said:
i don't know how to flash radio alone, and what file to use for flashing radio itself alone without flashing ROM !! i guess it should be done by using ANDROID FLASHER, but i don't know how, i just tried to flash all the ROM
Click to expand...
Click to collapse
No, I mean, what did it say when the RUU tried to flash the radio? In the post where you wrote the RUU log, you didn't write anything after "Radio v2". Did it say "OK", or "Fail"
OH I'm sorry, i forgot to mention it, it says FAIL-pu
chegue4 said:
OH I'm sorry, i forgot to mention it, it says FAIL-pu
Click to expand...
Click to collapse
Well, next time don't forget. It's the most important detail.
You have a radio brick. I'm afraid that you will have to struggle to unbrick your phone. You'll have to endlessly flash RUU's until one of them succeeds in flashing the radio.
There's no other known way
no problem, so you mean i should try all RUU"s on this forum till one of them work ?? that's it my friend ???
chegue4 said:
no problem, so you mean i should try all RUU"s on this forum till one of them work ?? that's it my friend ???
Click to expand...
Click to collapse
Well, try all the WWE RUU's from here:
http://www.shipped-roms.com/index.php?category=android&model=Bravo
Remember, you must try each one more than once. This is a matter of chance and luck.
Insist on the 2.3 RUU.
i am trying RUU_Bravo_Froyo_HTC_WWE_2_29_405_5_Radio_32_49_00_32U_5_11_05_27_release_159811_signed
when it reached about 24 % the phone vibrates two times, and it stucks on 26% on the status bar of the flashing, on 'upgrade radio'
it's still frozen on 26% should i wait for that ?? or unplug the usb and try with the same ROM,
because it's the first time that it vibrates !
after a weeks in the repair of its death, my phone now turns on, but still the problem of the frozen screen with htc logo, and four triangles
with this :
BRAVO PVT1 SHIP S-ON
HBOOT-1.02.0001
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.11.05.27
JUL 22 2011.16.19.16
so still no solution for an S-ON phone ?? i tried a lot of RUU's and now one worked for me