Develop Bugs

Stuck on HTC Boot

Hello, would appreciate a little assistance, thank you.
Flashed the gingerbread keyboard file from here
http://forum.xda-developers.com/showpost.php?p=9634029&postcount=10
There after my unit is stuck at the HTC boot screen.
My unit is a Telus unit. S-ON and rooted with ClockWork 2.5.1.2. Can boot to recovery.
Here's the specific HBOOT details in case it's important.
BRAVO PVT3 SHIP S-ON
HBOOT-0.93.0001
TOUCH PANEL-SYNW0101
RADIO-5.11.05.27
Aug 10 2010, 17:52:10
I assume I have to flash an RUU and re-root. Can someone point me to the right one for a Telus unit.
Unless of course someone has a set of ADB suggestions to backing out the 2.3 keyboard. And, no I didn't do a backup, yeah, my bad there. The unit is actually a friends that I was working on, so being fresh out of the box, didn't see the need to Nandroid.

Latest Telus FroYo RUU:
http://shipped-roms.com/download.ph...9.00.32U_5.11.05.27_release_151557_signed.exe

wipe and reflash a custom rom from recovery. i suppose that you can get into recovery. again, wipe everything before reflash.
cheers.
HTCinToronto said:
Hello, would appreciate a little assistance, thank you.
Flashed the gingerbread keyboard file from here
http://forum.xda-developers.com/showpost.php?p=9634029&postcount=10
There after my unit is stuck at the HTC boot screen.
My unit is a Telus unit. S-ON and rooted with ClockWork 2.5.1.2. Can boot to recovery.
Here's the specific HBOOT details in case it's important.
BRAVO PVT3 SHIP S-ON
HBOOT-0.93.0001
TOUCH PANEL-SYNW0101
RADIO-5.11.05.27
Aug 10 2010, 17:52:10
I assume I have to flash an RUU and re-root. Can someone point me to the right one for a Telus unit.
Unless of course someone has a set of ADB suggestions to backing out the 2.3 keyboard. And, no I didn't do a backup, yeah, my bad there. The unit is actually a friends that I was working on, so being fresh out of the box, didn't see the need to Nandroid.
Click to expand...
Click to collapse

mariosraptor said:
wipe and reflash a custom rom from recovery. i suppose that you can get into recovery. again, wipe everything before reflash.
cheers.
Click to expand...
Click to collapse
even though I'm at S-ON?

EddyOS said:
Latest Telus FroYo RUU:
http://shipped-roms.com/download.ph...9.00.32U_5.11.05.27_release_151557_signed.exe
Click to expand...
Click to collapse
Do you or anyone know if I need a goldcard for a Telus unit?

if you have a custom recovery put a custom rom in your sd card. wipe all, reflash. S-on has got nothing to do with it.
HTCinToronto said:
even though I'm at S-ON?
Click to expand...
Click to collapse

mariosraptor said:
if you have a custom recovery put a custom rom in your sd card. wipe all, reflash. S-on has got nothing to do with it.
Click to expand...
Click to collapse
Thanks much. Figured I had nothing to lose so flashed CM nightly to resume.
Guess the gingerbread keyboard is totally incompatible with the stock ROM.

you are welcome.
HTCinToronto said:
Thanks much. Figured I had nothing to lose so flashed CM nightly to resume.
Guess the gingerbread keyboard is totally incompatible with the stock ROM.
Click to expand...
Click to collapse

How do you upgrade radio?

I'm currently stuck on radio 3.35.20.10 and using custom ROMs such as CM I can't send things over bluetooth, so I am considering flashing a newer radio. Can anyone point me in the right direction please? I understand of the bricking risks, but in my opinion it needs to be done.
Heres my HBOOT information:
- BUZZ PVT SHIP S-OFF
- HBOOT-6.01.1002
- MI CROP-0622
- TOUCH PANEL-SY3KY_01
- RADIO-3.35.20.10
- Nov 17 2010,12:08:53
It is a European phone.

The process is the same as installing a Custom ROM Zip. The only pre-requisite is that you have to use CWM 2.x as Radio zips are not Edify scripted.
Alternately, you can use Fastboot to flash the radio as well using the command fastboot flash radio <file-name>.img. The required radio files can be found here:
http://forum.xda-developers.com/showthread.php?t=1029318 (Post 1, Point 4)
As long as you don't interrupt the process of flashing the radio, you should be fine.

3xeno said:
The process is the same as installing a Custom ROM Zip. The only pre-requisite is that you have to use CWM 2.x as Radio zips are not Edify scripted.
Alternately, you can use Fastboot to flash the radio as well using the command fastboot flash radio <file-name>.img. The required radio files can be found here:
http://forum.xda-developers.com/showthread.php?t=1029318 (Post 1, Point 4)
As long as you don't interrupt the process of flashing the radio, you should be fine.
Click to expand...
Click to collapse
Thanks, how do I know which is the newest radio?

The one you are having at the moment is the newest (ending with 20.10). However, for BT/GPS issues in CM or other AOSP ROMs, it is required that you reflash the radio, even if it is the same version as the one you already have.

3xeno said:
The one you are having at the moment is the newest (ending with 20.10). However, for BT/GPS issues in CM or other AOSP ROMs, it is required that you reflash the radio, even if it is the same version as the one you already have.
Click to expand...
Click to collapse
Thank you very much, I shall go do that now.
But just out of curiosity, will I have to reflash the radio every time I flash a CyanogenMod version?

No, it works fine between versions. (But, if you perform a data wipe before installing a new version, then, you may have to reflash the radio)

Wi-fi problem with CM7-7.1.0.1-buzz
Hi ,I am having problem with Wi-fi.When I connect to a network it works fine for few minutes but after that stops working .While on phone N/w strength is shown :Excellent.
Same case with Market and Browser.
Forgot the network in wireless settings and scaned again.Still the same problem.
Is there any way to get around it ? Is there anything to do with CM7 settings or reflashing the radio is the only option ?
Sorry,i am a newbie here.First time rooted my device like 2 days ago so out of any idea.
According to “3xeno” : http://forum.xda-developers.com/show....php?t=1355101
Do I need to reflash my radio ? RADIO-3.35.20.10 is the latest radio so there is no option of upgrading it . Any ideas ? Thanks.
Android version : 2.3.7
CM7 -7.1.0.1-buzz
Baseband version : 13.55.55.24H_3.35.20.10
Kernel version :2.6.35.14-nFinity([email protected]#1)
Build number : GWK74
HBOOT information:
Revolutionary
- BUZZ PVT SHIP S-OFF
- HBOOT-6.01.1002
- MI CROP-0622
- TOUCH PANEL-SYN3KY_01
- RADIO-3.35.20.10
wifi sleep policy is already set to “never” sleep. still have the problem.

Reflash radio...cm has this problem mine was solved by reflashing it...
Sent from my HTC Wildfire using XDA App

Ankurcul said:
Reflash radio...cm has this problem mine was solved by reflashing it...
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
Okey thanks, which radio should i reflash ? RADIO-3.35.20.10 ?
I am using CM7 -7.1.0.1-buzz.
Android version : 2.3.7
CM7 -7.1.0.1-buzz
Baseband version : 13.55.55.24H_3.35.20.10
Kernel version :2.6.35.14-nFinity([email protected]#1)
Build number : GWK74
HBOOT information:
Revolutionary
- BUZZ PVT SHIP S-OFF
- HBOOT-6.01.1002
- MI CROP-0622
- TOUCH PANEL-SYN3KY_01
- RADIO-3.35.20.10

Downloaded radio zip ” buzz.radio-3.35.20.10-signed”
Put on SD card
Started ROM Manager
Clicked Reboot into Recovery
Flashed from there
I got this Error :
Amend scripting (update script) is no longer supported.Amend scripting was deprecated by Google in Android 1.5.It was necessary to remove it when upgrading to the ClockworkMod 3.0 Gingerbread based recovery.
Please switch to Edify scripting(updater-script and update-binary)to create working update zip packages.
Installation aborted.
According to “3xeno” : http://forum.xda-developers.com/show...php?p=20227957
Do I need to use CWM 2.x ? If yes, how ? In ROM manager under “More Recoveries” >>Flash Alternate Recovery >>it says “No alternate recovery available”
When I click on “All CWM Recoveries”,it says “No legacy recoveries found”.
How to get CWM 2.x ? Any ideas ?
Android version : 2.3.7
CM7 -7.1.0.1-buzz
Baseband version : 13.55.55.24H_3.35.20.10
Kernel version :2.6.35.14-nFinity([email protected]#1)
Build number : GWK74
HBOOT information:
Revolutionary
- BUZZ PVT SHIP S-OFF
- HBOOT-6.01.1002
- MI CROP-0622
- TOUCH PANEL-SYN3KY_01
- RADIO-3.35.20.10

Okey ,Thanks,successfully reflashed the RADIO.
Gonna check if it's working now.

Okey ,Thanks,successfully reflashed the RADIO.
Gonna check if it's working now.

reflashing of RADIO didn't help
reflashed the RADIO "radio-3.35.20.10-signed" but still facing the same problem.
When I connect to a network it works fine for few minutes but after that stops working.
Any ideas ?
---------- Post added at 01:07 PM ---------- Previous post was at 01:05 PM ----------
Ankurcul said:
Reflash radio...cm has this problem mine was solved by reflashing it...
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
reflashed the RADIO "radio-3.35.20.10-signed" but still facing the same problem.
When I connect to a network it works fine for few minutes but after that stops working.
Any ideas ?

Unrevoked3 doesn't work

I have Desire:
Android version
2.2.2
Baseband version
2.6.32.15gfa401c
[email protected]#1
Build number
2.29.405.14CL345208 release-keys
Software number
2.29.405.14
Browser version
Webkit 3.1
Bravo PVT4 SHIP S-ON
HBOOT-0.93.0001
TOUCH PANEL-SYMW0101
Radio-5.11.05.27
Aug 10 2010, 17:52:10
I did the factory reset, and still, unrevoked3 says I have to new firmware..
How to root the damn phone?

I did the revolutionary and now I have revolutionary S-OFFed device with HBoot 6.93, but still NO ROOT!
Damn!
Revolutionary crashed when downloading clockworks..
What now?

gjurkovic said:
I did the revolutionary and now I have revolutionary S-OFFed device with HBoot 6.93, but still NO ROOT!
Damn!
Revolutionary crashed when downloading clockworks..
What now?
Click to expand...
Click to collapse
As It says
Code:
Does Revolutionary give me root?
No. You will need to flash this [url="http://downloads.androidsu.com/superuser/Superuser-3.0.7-efgh-signed.zip"]zipfile[/url] from recovery
refer to http://unrevoked.com/rootwiki/doku.php/public/revolutionary

I don't have a clockwork recovery.. When I select recovery, there is just the drive image with the ! inside the triangle...

gjurkovic said:
I don't have a clockwork recovery.. When I select recovery, there is just the drive image with the ! inside the triangle...
Click to expand...
Click to collapse
I think you have 2 options:
a. retry with Revolutionary until you successfully flash CWM recovery
b. select and flash a different custom recovery. Have a look here:
http://forum.xda-developers.com/showthread.php?t=1275632

use Android Flasher to flash this file its pretty simple to use and then you have your custom recovery on your desire

Thank you... I got revolutionary recovery..

loler90 said:
use Fastboot Commander to flash this file its pretty simple to use and then you have your custom recovery on your desire
Click to expand...
Click to collapse
Fixed!
10char

gjurkovic said:
I have Desire:
Android version
2.2.2
Baseband version
2.6.32.15gfa401c
[email protected]#1
Build number
2.29.405.14CL345208 release-keys
Software number
2.29.405.14
Browser version
Webkit 3.1
Bravo PVT4 SHIP S-ON
HBOOT-0.93.0001
TOUCH PANEL-SYMW0101
Radio-5.11.05.27
Aug 10 2010, 17:52:10
I did the factory reset, and still, unrevoked3 says I have to new firmware..
How to root the damn phone?
Click to expand...
Click to collapse
I had the same issue. I was able to solve it by downgrading to RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed.exe
I can't link to it due to forum restrictions, but you can find the download at shipped-roms.com. Look under category Android (duh ) / model name Bravo.
Just remember that it will wipe your data (not SD-card).

The ability of some people to solve problems in the most complicated ways never stops to amaze me.

Help Me Please!

I am new here, so I don't know if this is the correct section or not.
Anyway, I flashed a recovery image using ROM Manager.
Now, when I go into recovery, through ROM Manager or not, it hangs on the htc screen.
What do I do?

IDavidddHD said:
I am new here, so I don't know if this is the correct section or not.
Anyway, I flashed a recovery image using ROM Manager.
Now, when I go into recovery, through ROM Manager or not, it hangs on the htc screen.
What do I do?
Click to expand...
Click to collapse
Try to enter recovery manually (power off, then Vol- + power until Hnoot screen appears). If it doesn't work, install 4ext app and flash different recovery.
Good luck.
Sent from my HTC Desire using xda premium

IDavidddHD said:
I am new here, so I don't know if this is the correct section or not.
Anyway, I flashed a recovery image using ROM Manager.
Now, when I go into recovery, through ROM Manager or not, it hangs on the htc screen.
What do I do?
Click to expand...
Click to collapse
First of all, get rid of ROM Manager. It's a horrible software and causes more problems than it solves. Second of all, please post information from your hboot (top left corner).

i bought rom manager premium when i 1st got my desire and a few months later i think its a complete waste of money when all the roms are **** the servers are **** no help from the rom manager people bla bla bla i could go on

MatDrOiD said:
First of all, get rid of ROM Manager. It's a horrible software and causes more problems than it solves. Second of all, please post information from your hboot (top left corner).
Click to expand...
Click to collapse
Ok then
My HBOOT Info:
BRAVO PVT1 SHIP S-OFF
HBOOT-0.93.0001
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.11.05.27
Aug 10 2010,17:52:18
Also, when I try to flash a custom recovery in AndroidFlasher, it says something about an english bootloader.
EDIT: The cause of the problem was also my solution. I simply flashed the latest clockworkmod in rom manager again and the problem was fixed. Thanks for trying to help though guys

Good
Sent from my HTC Desire using XDA App

IDavidddHD said:
Ok then
My HBOOT Info:
BRAVO PVT1 SHIP S-OFF
HBOOT-0.93.0001
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.11.05.27
Aug 10 2010,17:52:18
Also, when I try to flash a custom recovery in AndroidFlasher, it says something about an english bootloader.
EDIT: The cause of the problem was also my solution. I simply flashed the latest clockworkmod in rom manager again and the problem was fixed. Thanks for trying to help though guys
Click to expand...
Click to collapse
Next time flash recovery via fastboot. Much easier and IMHO better than this ROM Manger crap.

[Q] How to downgrade hboot to go back to stock for Desire Bravo?

I want to go back to the stock version of Desire, The way it comes from factory, I tried according to many posts to flash a RUU but it cant as it shows S-Off even after flashing RUU. Some people says I have to downgrade hboot before flashing RUU, I am also not sure about which RUU I should flash. Please guide me how to do that , what hboot i need and how to come to stock hbook and please tell me the correct RUU to flash according my phone specs.
My phone Specs are:
Currently on Cyanogen Mod Version 10.1 (JB 4.2.2)
4EXT Recovery.
Unbranded GSM HTC Desire Bravo (Not bound to any network provider)
BRAVO PVT4 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.11.05.27
Aug 10 2010

Mastermindsaifee said:
I want to go back to the stock version of Desire, The way it comes from factory, I tried according to many posts to flash a RUU but it cant as it shows S-Off even after flashing RUU. Some people says I have to downgrade hboot before flashing RUU, I am also not sure about which RUU I should flash. Please guide me how to do that , what hboot i need and how to come to stock hbook and please tell me the correct RUU to flash according my phone specs.
My phone Specs are:
Currently on Cyanogen Mod Version 10.1 (JB 4.2.2)
4EXT Recovery.
Unbranded GSM HTC Desire Bravo (Not bound to any network provider)
BRAVO PVT4 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.11.05.27
Aug 10 2010
Click to expand...
Click to collapse
Just flash the Alpharev downgrade.img then run a ruu for ur device, or if u dont wana search for the correct ruu then just use the 2.3 gb upgrade ruu, it can be found in bortaks troubleshooting guide, or at shipped roms.

Going to do as directed

jmcclue said:
Just flash the Alpharev downgrade.img then run a ruu for ur device, or if u dont wana search for the correct ruu then just use the 2.3 gb upgrade ruu, it can be found in bortaks troubleshooting guide, or at shipped roms.
Click to expand...
Click to collapse
Could You please provide me the links for Alpharev downgrade.img and 2.3gb upgrade
many thanks in advance

jmcclue said:
Just flash the Alpharev downgrade.img then run a ruu for ur device, or if u dont wana search for the correct ruu then just use the 2.3 gb upgrade ruu, it can be found in bortaks troubleshooting guide, or at shipped roms.
Click to expand...
Click to collapse
I found that file on Alpharev site , i know how to flash PB99IMG file, put it on SD Card and it automatically run it when we on the phone with vol down and power button, going with that
alpharev.nl/PB99IMG_downgrade.zip

Mastermindsaifee said:
I found that file on Alpharev site , i know how to flash PB99IMG file, put it on SD Card and it automatically run it when we on the phone with vol down and power button, going with that
alpharev.nl/PB99IMG_downgrade.zip
Click to expand...
Click to collapse
u have to rename that file to just PB99IMG.zip for it to work, as for a ruu, google shipped roms the look in bravo section and find the ruu for ur phone, i.e country/region etc etc

I did all as u said but m still on S-OFF
jmcclue said:
u have to rename that file to just PB99IMG.zip for it to work, as for a ruu, google shipped roms the look in bravo section and find the ruu for ur phone, i.e country/region etc etc
Click to expand...
Click to collapse
I did all as u said but m still on S-OFF
I flashed Alpharev downgrade by Android Flasher and then run the RUU (2.3 gb update) from http://forum.xda-developers.com/showthread.php?t=1196172
when i go to bootloader it still shows the option to go into recovery and etc , but when i clicked on recovery there is a black screen with a mobile and a /!\ symbol at the center of screen , then i have to pull the battery off and restart the phone.
Thats the before and after Alpharev and RUU (I underlined the changes)
Before
BRAVO PVT4 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.11.05.27
Aug 10 2010
After
BRAVO PVT4 SHIP S-OFF
HBOOT-1.02.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.17.05.23
Jul 22 2011

Mastermindsaifee said:
I did all as u said but m still on S-OFF
I flashed Alpharev downgrade by Android Flasher and then run the RUU (2.3 gb update) from http://forum.xda-developers.com/showthread.php?t=1196172
when i go to bootloader it still shows the option to go into recovery and etc , but when i clicked on recovery there is a black screen with a mobile and a /!\ symbol at the center of screen , then i have to pull the battery off and restart the phone.
Thats the before and after Alpharev and RUU (I underlined the changes)
Before
BRAVO PVT4 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.11.05.27
Aug 10 2010
After
BRAVO PVT4 SHIP S-OFF
HBOOT-1.02.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.17.05.23
Jul 22 2011
Click to expand...
Click to collapse
Dunno so, usually when u flash bravo_downgrade.img then ruu it should be s-on again. Why does it matter that its s-off? it doesnt affect the phone in any way now that ur back on stock rom.

did you try the ruu from here?
http://forum.xda-developers.com/showthread.php?t=695667
Are you trying to go back for warranty or sth??

RoyW said:
did you try the ruu from here?
http://forum.xda-developers.com/showthread.php?t=695667
Are you trying to go back for warranty or sth??
Click to expand...
Click to collapse
jmcclue said:
Dunno so, usually when u flash bravo_downgrade.img then ruu it should be s-on again. Why does it matter that its s-off? it doesnt affect the phone in any way now that ur back on stock rom.
Click to expand...
Click to collapse
nops thats not for warranty purposes, My camera was working fine before rooting, But after root camera is not working on any of the avilable roms for HTC, I tried almost all roms. I sent the phone to be checked for the camera for hardware issues and they said its ok, So I decided to return to stock on which camera is working fine.

Mastermindsaifee said:
nops thats not for warranty purposes, My camera was working fine before rooting, But after root camera is not working on any of the avilable roms for HTC, I tried almost all roms. I sent the phone to be checked for the camera for hardware issues and they said its ok, So I decided to return to stock on which camera is working fine.
Click to expand...
Click to collapse
Did camera works for sure after that ? what you thinks ?

Mastermindsaifee said:
Did camera works for sure after that ? what you thinks ?
Click to expand...
Click to collapse
I tried telling you before, it's likely hardware.
You're already on stock ROM, even if you get it to S-ON I don't believe it will make a difference to the camera.
If you really need to get to S-ON, try flashing the downgrader manually using fastboot commands instead of android flasher. Set it up here You will know it works as it will say "Alpharev Unlock" at the top of the bootloader screen.
Then try the 2.3.3 RUU again.
If the camera still doesn't work, S-ON and stock ROM, then it's hardware related.

eddiehk6 said:
I tried telling you before, it's likely hardware.
You're already on stock ROM, even if you get it to S-ON I don't believe it will make a difference to the camera.
If you really need to get to S-ON, try flashing the downgrader manually using fastboot commands instead of android flasher. Set it up here You will know it works as it will say "Alpharev Unlock" at the top of the bootloader screen.
Then try the 2.3.3 RUU again.
If the camera still doesn't work, S-ON and stock ROM, then it's hardware related.
Click to expand...
Click to collapse
Must try it tonight for sure , Thanks

eddiehk6 said:
I tried telling you before, it's likely hardware.
You're already on stock ROM, even if you get it to S-ON I don't believe it will make a difference to the camera.
If you really need to get to S-ON, try flashing the downgrader manually using fastboot commands instead of android flasher. Set it up here You will know it works as it will say "Alpharev Unlock" at the top of the bootloader screen.
Then try the 2.3.3 RUU again.
If the camera still doesn't work, S-ON and stock ROM, then it's hardware related.
Click to expand...
Click to collapse
Got an Error message

Mastermindsaifee said:
Got an Error message
Click to expand...
Click to collapse
It says Not Allowed, which to me sounds like your no longer s-off. Are you?
Try using the PB99IMG.zip method and see if that works.

Chromium_ said:
It says Not Allowed, which to me sounds like your no longer s-off. Are you?
Try using the PB99IMG.zip method and see if that works.
Click to expand...
Click to collapse
I think so as the phone shows :
Before
BRAVO PVT4 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.11.05.27
Aug 10 2010
Now
BRAVO PVT4 SHIP S-OFF
HBOOT-1.02.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.17.05.23
Jul 22 2011

Mastermindsaifee said:
I think so as the phone shows :
Before
BRAVO PVT4 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.11.05.27
Aug 10 2010
Now
BRAVO PVT4 SHIP S-OFF
HBOOT-1.02.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.17.05.23
Jul 22 2011
Click to expand...
Click to collapse
Weird. Try the PB99IMG.zip.

Chromium_ said:
It says Not Allowed, which to me sounds like your no longer s-off. Are you?
Try using the PB99IMG.zip method and see if that works.
Click to expand...
Click to collapse
In PB99IMG.zip method , I have to rename ""bravo_downgrade.img"" in to PB99IMG.zip and put it on sd card root, and then open phone in boot HBOOT ? After that again run 2.3 RUU ?

Mastermindsaifee said:
In PB99IMG.zip method , I have to rename ""bravo_downgrade.img"" in to PB99IMG.zip and put it on sd card root, and then open phone in boot HBOOT ? After that again run 2.3 RUU ?
Click to expand...
Click to collapse
No, you DONT just rename an .img file to a .zip file. Download the PB99IMG_downgrade.zip from alpharev. Then rename that file to PB99IMG.zip. After that put it on the root of the sdcard, and boot into hboot. Wait a few seconds and it should ask you if you want to install. If it installs successfully run the 2.3 RUU.

Chromium_ said:
No, you DONT just rename an .img file to a .zip file. Download the PB99IMG_downgrade.zip from alpharev. Then rename that file to PB99IMG.zip. After that put it on the root of the sdcard, and boot into hboot. Wait a few seconds and it should ask you if you want to install. If it installs successfully run the 2.3 RUU.
Click to expand...
Click to collapse
Trying