My s3 has an unresponsive screen. To troubleshoot, I did a factory reset on it but now the ROM doesn't have USB debugging enabled so I can't use any app to control the screen and reset the flash counter.
Anyone know of a ROM that already has USB debugging enabled?
Most custom ROMS have it enabled, but if your screen is dead, how you going to flash it? I don't think any stock Rom will have it enabled.
Please read forum rules before posting
Questions and Help issues go in Q&A and Help section
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Related
I need instructions because i was trying to root and forgot to turn on usb debugging and am now stuck on screen that says "Firmware upgrade encountered an issue.Please select recovery mode in kies and try again" I tried to use kies but it does not work and am now stuck on this screen and do not know what to do? Please help.
I think that screen can be used as a type of download mode. Go through the process of connecting to Odin, see if it recognizes your phone.
It was able to go into download mode thank you so much.
You checked "yes this is a question" which means it gooooooooes where?
Please post questions in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Hello all, I am looking for some help. The advanced search is down and I am unable to find a remedy. I have been a crackflasher since my OG Droid.
I have been using WugFresh's Toolkit without any issue until now. I have used the various versions. Today upon wiping the phone clean by reverting to stock, relocking, unlocking then rooting, I ran into an issue. When the Toolkit prompt says that it is booting into bootloader, it doesn't. Nothing has changed. I upgraded nothing. A computer restart produced same result. In trying to root, I get to that point as my device in connected and I get the fastboot issue. I power the phone down, boot into bootloader then the process continues until it reboots my phone via the prompt and the "waiting for device to boot up" window shows and rremains on the screen. My phone has already booted and there is no SU app.
In problem solving, I uninstalled the PDANet and Nexus items on the device manager as per the instructions in Wugfresh. Used the alternate USB program attached and uninstalled the items from PDANet,Samsung and the two VendorId's. I rebooted and reinstalled the drivers per instructions. Everything connects as it should but once I get to the boot into bootloader in the rooting option, it does not reboot the deviceinto bootloader. I manually do it to only get the same result again.
Any ideas? I didn't change anything until I troubleshooted. Basically, I can't re-root my device via the toolkit.
We can try to use a direct CMD command and force n fix ur phone. This issue happens sometimes with wuggy, so suggest a time u r free buddy and will try to solve your issue by taking remote assistance of your system.
Cheers !!
Sent from my Galaxy Nexus using xda premium
Man up and use cmd commands..................
http://forum.xda-developers.com/showthread.php?t=1529058
FAQs
http://forum.xda-developers.com/showthread.php?t=1812959
Beamed from my Maguro.
Don't use a toolkit? I think that should fix all your issues.
Sent from my Galaxy Nexus using Tapatalk 2
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
My apologies. I found the error if anyone else runs into the issue. Since I had my GNex I was able to use the front USB ports on my desktop, using Win7 64 GB and Wugfresh without any probs.
There was a Windows Update downloaded (had to be critical) to my machine for a Samsung driver. I had to then revert to the back ports. Prob solved. Thanks for those that assisted.
Sent from my Nexus 10 using Tapatalk HD
Mach3.2 said:
Man up and use cmd commands..................
http://forum.xda-developers.com/showthread.php?t=1529058
FAQs
http://forum.xda-developers.com/showthread.php?t=1812959
Beamed from my Maguro.
Click to expand...
Click to collapse
Thank you for posting these links! This is so easy, a caveman could do it!
My Galaxy S3 turns on go to splash screen and then goes black and a blue LED light turns on and sits there a vibrates what do i do Need help
We need more info. Is it rooted? If it is what where you running? What did you do before it died?
it was rooted and its still not dead i rooted it with odin and super su first the texting on it stoped working so i tried to fix that and installed the wrong package i think
Can you manually put it in download mode?
And what did you flash? Isnt Metro PCS S3 more related to Sprints or Verizons?
Sent from my SGH-T999 using xda premium
Yea I believe the network is
Sent from my SGH-T999 using xda app-developers app
Did this happen after you flashed a rom? If so, you could try wiping the cache and dalvik cache if you can enter into recovery.
As stated before
Let us know if you can put it on Download mode. I had this issue with my tmob sgs3
Please read forum rules before posting
Questions and Help issues go in Q&A and Help section
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
just yesterday i could put it into download mode now today i wont even turn on it just vibrates and nothing but when i put it on the charger it can go into download mode and i have no idea what i flashed it with
What do you mean when you charge your phone it can go to download mode? If so, charge it, get into download mode, take out charger, plug into computer, launch odin, and flash stock rom and kernel.
I have a nexus 7 tablet. It stopped working and freezes at the start up screen (coloured balls circling). I have tried restart and factory reset with no luck. So decided to flash the original settings using the skipsoft Nexus 7 toolkit. I managed to use this to install the drivers on my windows 7 laptop. However I am unable to enter developer options to enable USB Debugging because the screen is frozen.
Please can you tell me how I can do this on a tablet that is frozen. I am not an expert with android and although I have searched widely have come up with no solution.
Many thanks
Brooz
Brooz said:
I have a nexus 7 tablet. It stopped working and freezes at the start up screen (coloured balls circling). I have tried restart and factory reset with no luck. So decided to flash the original settings using the skipsoft Nexus 7 toolkit. I managed to use this to install the drivers on my windows 7 laptop. However I am unable to enter developer options to enable USB Debugging because the screen is frozen.
Please can you tell me how I can do this on a tablet that is frozen. I am not an expert with android and although I have searched widely have come up with no solution.
Many thanks
Brooz
Click to expand...
Click to collapse
A few people have read this but noone has responded - I am wondering if this is because it is a silly question and people are too polite to say or there is no known solution. Comments appreciated; thanks
Brooz said:
A few people have read this but noone has responded - I am wondering if this is because it is a silly question and people are too polite to say or there is no known solution. Comments appreciated; thanks
Click to expand...
Click to collapse
Did you factory reset in recovery(power + volume up)?
If you did that already you should fastboot flash the factory image manually. There should be a guide in General section that shows you how. Fast boot is way better to learn than using a tool.
meekrawb said:
Did you factory reset in recovery(power + volume up)?
If you did that already you should fastboot flash the factory image manually. There should be a guide in General section that shows you how. Fast boot is way better to learn than using a tool.
Click to expand...
Click to collapse
Thanks very much - I have now tried to fastboot flash the image manually but I am getting an error and it seems that there is a fault in the factory image for razor-ktu84p - either that or the problem is I cannot enable usb debugging because the device is frozen. I dont find the instructions easy to follow but I am a newcomer to all this. I guess I should try another thread but thanks for your help.
First, if I'm in the wrong section for this I'm very sorry, if a moderator or admin could please move me to the correct one that would be awesome.
So, my LG G3 is 100% hard-bricked. The screen wont turn on, the buttons do nothing, download mode, emergency mode, and fastboot mode are 100% un-accessible. I'm a bit of a noob, so if you're able to help me make it as noob friendly as possible! Thank you!
Same here. I can also get a battery with a "?" Mark on it when I plug it in without the battery but that's it. My pc detects it as LGE AndroidNET.
Need immediate help please, only have 1 day before it's taken from me unless I fix it. Will compensate.
Sent From My HTC One (M9)