I need instructions because i was trying to root and forgot to turn on usb debugging and am now stuck on screen that says "Firmware upgrade encountered an issue.Please select recovery mode in kies and try again" I tried to use kies but it does not work and am now stuck on this screen and do not know what to do? Please help.
I think that screen can be used as a type of download mode. Go through the process of connecting to Odin, see if it recognizes your phone.
It was able to go into download mode thank you so much.
You checked "yes this is a question" which means it gooooooooes where?
Please post questions in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Related
When I plug in my T999 Galaxy S3 into my laptop, it doesn't reconize the phone at all, it charges that's all I have the drivers installed and have debugging on and rebooted my computer and phone still no difference can somebody please help thanks!!
Go her to find your answer
http://forum.xda-developers.com/showthread.php?p=32906335#post32906335
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
TRY THIS
nynexelf said:
when i plug in my t999 galaxy s3 into my laptop, it doesn't reconize the phone at all, it charges that's all i have the drivers installed and have debugging on and rebooted my computer and phone still no difference can somebody please help thanks!!
Click to expand...
Click to collapse
go to samsung.com an in the search spot type kies download install it could be bad or not installed prop. Drivers if still dont work put the phone into download mode see if the computer reconize it that way.
I've downloaded my drivers and Kias from the samsung website, and still doesn't make any differance at all, it's really strange, i'm starting to get worried, I have tried using anther usb cable and even a different computer and still no good so I don't know what to do
sdsdqbam said:
go to samsung.com an in the search spot type kies download install it could be bad or not installed prop. Drivers if still dont work put the phone into download mode see if the computer reconize it that way.
Click to expand...
Click to collapse
Mine is the same I actually have to the mass storage utility app on my phone for it to read it on my desktop. Now if I use it on my iMac with windows it reads or just fine
Sent from my iPad using Tapatalk HD
nynexelf said:
I've downloaded my drivers and Kias from the samsung website, and still doesn't make any differance at all, it's really strange, i'm starting to get worried, I have tried using anther usb cable and even a different computer and still no good so I don't know what to do
Click to expand...
Click to collapse
____________________________________________________________________________________
First , did you follow EXACTLY the steps in this link?
http://forum.xda-developers.com/showthread.php?p=32906335#post32906335
You need do do EACH STEP IN SEQUENCE and ALL of them
If you jump and skip around, it most likely will not work.
If you follow the directions, It WILL work.
If there are any error messages on the procedure, post them, and I will get you going in the right direction.
Really, it isn't hard to get this to work! Just be sure you do each step in sequence, and follow the list!
Post whatever comes of your effort.
My Galaxy S3 turns on go to splash screen and then goes black and a blue LED light turns on and sits there a vibrates what do i do Need help
We need more info. Is it rooted? If it is what where you running? What did you do before it died?
it was rooted and its still not dead i rooted it with odin and super su first the texting on it stoped working so i tried to fix that and installed the wrong package i think
Can you manually put it in download mode?
And what did you flash? Isnt Metro PCS S3 more related to Sprints or Verizons?
Sent from my SGH-T999 using xda premium
Yea I believe the network is
Sent from my SGH-T999 using xda app-developers app
Did this happen after you flashed a rom? If so, you could try wiping the cache and dalvik cache if you can enter into recovery.
As stated before
Let us know if you can put it on Download mode. I had this issue with my tmob sgs3
Please read forum rules before posting
Questions and Help issues go in Q&A and Help section
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
just yesterday i could put it into download mode now today i wont even turn on it just vibrates and nothing but when i put it on the charger it can go into download mode and i have no idea what i flashed it with
What do you mean when you charge your phone it can go to download mode? If so, charge it, get into download mode, take out charger, plug into computer, launch odin, and flash stock rom and kernel.
My s3 has an unresponsive screen. To troubleshoot, I did a factory reset on it but now the ROM doesn't have USB debugging enabled so I can't use any app to control the screen and reset the flash counter.
Anyone know of a ROM that already has USB debugging enabled?
Most custom ROMS have it enabled, but if your screen is dead, how you going to flash it? I don't think any stock Rom will have it enabled.
Please read forum rules before posting
Questions and Help issues go in Q&A and Help section
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Hey all...and to answer the number one question, yes I did do A TON of searches already to find a solution...PLEASE HELP if you have the knowledge
Phone Model: Galaxy S III (SPH-L710) Sprint 16gb
Firmware/ROM: All stock and never tried ANY customization
Problem: I think the problem happened when the phone auto updated to 4.3. Now when the phone tries to boot it just boots to the second Samsung "Samsung Galaxy S III" screen, reboots and then will get to the same screen and just sits there. One time I even let it sit there for 30 minutes just to see if it needed the ridiculous amount of time. When I try to get the phone into recovery mode (Volume UP/Home key/then the Power key) it will boot and on the first Samsung "Samsung" screen, in the top left corner in small print, it shows "booting recovery...". Then it will just go strait to the second Samsung screen then keeps rebooting twice before it will just stop on the second Samsung screen again. When I try to get the phone into ODIN mode (Volume DOWN/Home key/then the Power key) it will boot asking me if I'm sure and to press Volume UP to continue. Once I press Volume UP, to continue, I get to ODIN mode. In the top left corner it shows...
ODIN MODE
Product Name: SPH-710
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Official
(all grayed out) Qualcomm Secureboot: ENABLE
Then in the middle of the screen is the little Android guy. Below that it shows, "Downloading..." "Do not turn off target!!". And it just sits there doing nothing else.
I'm pretty sure I have done everything I could possible do to get it working again. From what I understand there may be other things I can do. Worse case scenario, if I must, I would be willing to loose everything on the phone and start over from scratch, if that's even possible.
There has to be some VERY smart people on here that can help me. This is my wife's phone and we don't have an upgrade until May...PLEASE HELP. Thanks all!!!
Okay 1st go to sammobile.com and download the firmware for d2att also you will need Odin I think it's 3.04. You can search odin on xda there are a few guides to use then put phone in download mode and use odin to flash the firmware, everything u need to follow is posted in sgsIII development forum
Sent from my SGH-I747M using Tapatalk
jimchee said:
Okay 1st go to sammobile.com and download the firmware for d2att also you will need Odin I think it's 3.04. You can search odin on xda there are a few guides to use then put phone in download mode and use odin to flash the firmware, everything u need to follow is posted in sgsIII development forum
Sent from my SGH-I747M using Tapatalk
Click to expand...
Click to collapse
I already downloaded latest versions of both. It states, from phone off and unplugged, start phone using ODIN/download route then immediately plug into PC then open ODIN and click the button....but I cant get that far because ODIN app on PC never recognizes the phone to be able to do so.
I'm now starting to get very discouraged because i'm seeing in some places that the device needs to be put into USB debugging mode. Please tell me this isn't true. Because there has never been any reason to put the phone into USB debug mode.
Can someone please confirm this. I'm really crossing my finger that there is a way to do this without needing to be in USB debug mode...PLS PLS PLS!!!
Thanks for your reply
http://forum.xda-developers.com/galaxy-s3-sprint/help
jimchee said:
Okay 1st go to sammobile.com and download the firmware for d2att also you will need Odin I think it's 3.04. You can search odin on xda there are a few guides to use then put phone in download mode and use odin to flash the firmware, everything u need to follow is posted in sgsIII development forum
Sent from my SGH-I747M using Tapatalk
Click to expand...
Click to collapse
He has the Sprint version, get the one for d2spr, correct?
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
DirtTrash said:
I already downloaded latest versions of both. It states, from phone off and unplugged, start phone using ODIN/download route then immediately plug into PC then open ODIN and click the button....but I cant get that far because ODIN app on PC never recognizes the phone to be able to do so.
I'm now starting to get very discouraged because i'm seeing in some places that the device needs to be put into USB debugging mode. Please tell me this isn't true. Because there has never been any reason to put the phone into USB debug mode.
Can someone please confirm this. I'm really crossing my finger that there is a way to do this without needing to be in USB debug mode...PLS PLS PLS!!!
Thanks for your reply
Click to expand...
Click to collapse
You have to plug the device in from download mode AFTER Odin is running. So, phone in download mode, start Odin, then plug in. Before you go that far are you letting go of the buttons when trying to get to recovery as soon as you seen 'recovery starting' in the top left corner or are you still holding them? If you do not let go the device will continue to attempt a normal boot. If you can get into recovery and do a factory restore it very well may solve your boot issue.
Hello, First of all let me introduce myself. My name is Mark, I live in the Philippines,and I'm also a grade 7
If you're wondering why someone so young is in this forums, it's because I just need help with my tablet.
I have a Samsung Galaxy Tab 3 10.1, I tried to root it with Kingo Root. But I was too late to find out that my tablet wasn't supported. I tried to unbrick it before but I haven't found anything yet, and then my tablet went out of battery. When it had its battery back, I can't go to Odin/Download mode anymore. If anyone can help me fix this problem and unbrick my device, that would be very helpful. Also please reply quickly since we need it now.
Thanks in advance.
-Mark
Hello there !
If you can't go to "Download mode" anymore, I'm sorry but it starts bad...
Can you still go on "Recovery mode" ?
Dowdheur said:
Hello there !
If you can't go to "Download mode" anymore, I'm sorry but it starts bad...
Can you still go on "Recovery mode" ?
Click to expand...
Click to collapse
Hello there, sorry for late response. I'm still at church replying and I dont have my tablet yet. How do you get to recovery mode by the way?
Oh and when I try to do this: Home button+power+lower volume it just wont go to odin/download mode. And it just flickers and goes back to samsung screen
Emergency!! Emergency!!
Sorry, I'm not here with a solution to the problem but Even i am dealing with the same kind of problem... actually I was updating my Galaxy Tab 3.7.0 Android jellybean 4.1.2 version to kitkat 4.4.2... but somehow my pc got hanged and the whole process was terminated.. after that i tried to switch on my tab 3.7.0 but It just kept saying 'Firmware upgrade encountered an issue. please select recovery mode in kies and try again!!'. I am not able to go into download mode or either recovery mode. When i tried it to connect with kies it said that kies doesn't support this device. i have all the drivers needed. And it's not even charging. I tried to recover it by using CWF recovery mod using ODIN 3.09 but the process just stucks at 'setting connection' I AM STUCK! PLEASE HELP!