I know this is a weird question but Im not a huge fan of Amoled screens.
Is there a way to replace the screen for an LCD ex. S4 active ?
No.
None of the drivers for the led screen would run the LCD screen.
Sent from your phone. You should be careful where you leave that thing.
Related
Is the touch screen of black tft compatible with gold screen??
in need a fast answer please!
P4k1t0 said:
Is the touch screen of black tft compatible with gold screen??
in need a fast answer please!
Click to expand...
Click to collapse
No.
There are two different LCD / TFT models for the Prophet. The one with the gold connection is not compatible with the one with the black connection, and vice versa.
I have replacement LCD screens. If you need one, PM me.
yes i know the lcd's is diferent, and isnt compatible, my question is the touch screen and not the lcd's!
Yes. The touchscreen is the same. The only part that is different is the LCD.
S200 screen flickers and does not show colors correctly
Hi,
Seems that you know a little bit about the screen for the S200?
Mine is since the first bios upgrade flickering when showing bigger screen areas in one color and also pictures and movies show poor color quality!
I just opened the S200 and unconnected and connected the screen connector plug but no improvement. Any idea what is wrong with that device?
Thanks,
Hi, I'm wanting to replace my HOXs screen.
There are yellow spots on the screen, does this mean I need to replace the lcd panel as well or if I just replace the glass/digitizer will this fix the yellow spots?
Also, I managed to fix a galaxy ace screen (glass/digitizer) by separating the digitizer from the lcd panel and the lcd panel is fine. I know it has been said it's not really possible to separate the two with the HOX but if I have managed to do it for the ace, do you think it's possible for the HOX??
Any thoughts would be appreciated
You don't really need to replace the screen if you have orange spots ,just put the screen on full brightness over night and your problems will be solved , if you want to replace the screen ,replace the whole thing as you said I have seen only one video out of 60 that the guy was successful in ceperating digitiser from LCD ,good luck
They will disapear after some time. I had the spots too.
Thanks for the replies.
Sorry I forgot to mention that the screen is cracked too. But my main concern was separating the lcd from the digitizer. I did do it for the ace and it was pretty easy buy if you think I would be better off to replace the panel and digitizer, then I'll do that.
shinigamikris said:
Thanks for the replies.
Sorry I forgot to mention that the screen is cracked too. But my main concern was separating the lcd from the digitizer. I did do it for the ace and it was pretty easy buy if you think I would be better off to replace the panel and digitizer, then I'll do that.
Click to expand...
Click to collapse
The things is, the ace and the hox are very different devices. Just because you've managed to seperate digitizer and screen on the ace doesn't mean you could do that on the hox too. Just compare the space between LCD and digitizer of both devices and you'll see what I mean.
Sent from my HTC One X using xda premium
You wont manage to seperate the screen from the digitizer trust me, i tryed it and the glue is too strong + the lcd is too fragile.
There is a blue tinted 'smear' in the left center of my phone. I removed my screen protector and realized it wasn't a smudge. It's the screen itself. It doesn't appear in screen shots either. It's apparent with white background.
I also noticed increasingly more dark shadows in my screen when pitch black screens or loading screens show up. They're hard to describe. It's like seeing a lcd with bleeding light but in various smears or shapes.
I've had this since I got the phone on launch day but since then I've noticed the number increase.
I thought maybe I've banged it too much or pressure in my pocket. But I never keep anything in my pocket with my phone besides my leather wallet occasionally. I also had a flip cover too which makes it weirder.
This is a samsung screen thing...most amoled screens have this... I belive its the glue or somthing...if u turn ur screen all the way down and use a screen filter to lower the brightness even more.. it should show up on blacks...there is a thread somewhere buried in qna with same issue.
twanskys204 said:
This is a samsung screen thing...most amoled screens have this... I belive its the glue or somthing...if u turn ur screen all the way down and use a screen filter to lower the brightness even more.. it should show up on blacks...there is a thread somewhere buried in qna with same issue.
Click to expand...
Click to collapse
even the weird blue miscolor? Its so annoying :X
Can u take a pic of your phone....like not screen shot but whith a different device?
Hello everyone.
Months ago my Samsung Tab Pro 8.4 felt into the floor which cracked the screen.
The touch screen was working and the colors of the tablet were still good.
Later I went to a store to put a new front which resulted in what you can see in the attached pictures [I CAN'T UPLOAD PICTURES YET]. They did a really bad job.
I don't know if the problem is just the front screen or if the entire LCD needs to be replaced. The difference is quite big in terms of money.
Can you help me on this? What should I buy: only the front LCD or the entire screen and touch?
Thanks for your help.
Can you give me an explanation, please? I really need to understand why.
tbica said:
Can you give me an explanation, please? I really need to understand why.
Click to expand...
Click to collapse
The digitizer+glass and the lcd are two different parts. If you see oddness in the screen display in terms of weird colors, stripes or artifacts, the lcd is broken. If touch doesn't work, or the glass is broken but it can still display normal colors etc, generally only the digitizer+glass needs replacement.
Sent from my SM-T320 with Tapatalk 4
amandalopolo said:
LCD Only: If the image under the glass is broken and the touch panel is NOT then you only need an LCD.
Touch Panel aka Digitizer: If the top touch panel or aka glass top is cracked or broken but the image under it is fine then you only need the Touch Panel.
Complete Screen with Touch Panel and LCD: If the top touch panel is broken and the lcd image is either black liquid or cracked you need a complete screen.
Click to expand...
Click to collapse
Thanks for the explanation.
So, I need the entire set. It's so expensive.
It's a shame that in the end the specs don't count so much. If we drop our toy, all depends on the screen.
tbica said:
Thanks for the explanation.
So, I need the entire set. It's so expensive.
It's a shame that in the end the specs don't count so much. If we drop our toy, all depends on the screen.
Click to expand...
Click to collapse
Your best bet would probably to send it to Samsung (maybe its under warranty or can make and exception), plus samsung probably warrantys their work.
or find a new /used lcd with the digitizer already pre-attached so its a easy install.
Hi guys,
So I sent my note 2 to the repair shop because the glass was cracked and I want to change it. The display and touch is fine though.
I received back the phone with severe burn-in I would say. The shadow of keypad and status bar.
AND the keyboard is NOT from my note, so is the status bar. I was using custom ROM and the burned-in keyboard looked like a stock keyboard. If I remember correctly, last time I'm using stock rom was 2014.
So my question is, does the screen burn-in come with glass or the AMOLED panel? Did they replace my perfect working AMOLED panel with the faulty one?
Thank you!
Sounds like the company did not change the glass but the entire scrreen including glass, LCD, and frame.
It comes from the OLED panel, not the glass.