Related
Hi So my friend rooted his HTC Wildfire S the other day and then flashed an experimental version of CM7 on it. Now its bricked and forever stays on a black screen. Occasionally, it will vibrate 3 or 4 times but thats about the only action it does. I tried putting PG76IMG.zip on my sd card and holding power + vol down but that didnt work. The phone also isnt recognized by Windows 7 Ultimate or Mac OSX Lion, but it does charge. Can i get some help on this? Thanks guys
can you get to custom recovery or hboot ?
nope, screen wont even turn on.
Have you tried flashing a RUU?
The phone isnt recognized by windows. it says there is a USB error. Unless maybe i used the wrong RUU?
SynGatesFan20 said:
The phone isnt recognized by windows. it says there is a USB error. Unless maybe i used the wrong RUU?
Click to expand...
Click to collapse
Where are you?
What network are you on?
What phone do you have?
United states, wisconsin
virgin mobile
HTC Wildfire S
You are in Qualcomm Diagnostic Mode. Use Search and enter Qualcomm Diagnostic Mode. Fund a WFS guide and use it accordingly.
Sent from a Time Lord, using his TARDIS.
i did and the only guide i could find didnt help much. My phone doesnt seem to recognize that the .zip file is on the sd card... i want to use the RUU but my computer wont recognize the phone either, not even as a device listed as "qualcomm device". The only thing my phone does is vibrate either 3,4, or 7 times.
SynGatesFan20 said:
i did and the only guide i could find didnt help much. My phone doesnt seem to recognize that the .zip file is on the sd card... i want to use the RUU but my computer wont recognize the phone either, not even as a device listed as "qualcomm device". The only thing my phone does is vibrate either 3,4, or 7 times.
Click to expand...
Click to collapse
Search foe it again, but use the advanced search, located in the WFS General forum. In a cooler of hours from now, I might help you, if I got the time.
Sent from a Time Lord, using his TARDIS.
It's funny that about 50 people made a new thread about this problem and none of them took the time to look for a similar situation.
MrTaco505 said:
It's funny that about 50 people made a new thread about this problem and none of them took the time to look for a similar situation.
Click to expand...
Click to collapse
True
Sent from a Time Lord, using his TARDIS.
ok ill try again. I would greatly appreciate the help. Thank you
still no luck :/ all the guides have me running in circles. I did however find one bit of information that might be of use. I appears that my internal memory may be corrupt. That may explain why its not being seen by windows or adb. Any way of fix thing this?
i Couldn't find my problem in the forums im sorry if im repeating it, seriously... im sorry. its about my HTC Desire HD.
i was using Advanced Ace Hack Kit and everything was fine, i downloaded the ROM as the cmd asked me to, installed it, rebooted it twice accroding to the cmd, but then it said something about pressing power button once this step finishes, and thats when my phone got stuck, the volume keys werent working and neither was the power key, just then my power went out and everything crashed!!
now when i turn on my HTC DESIRE HD, it starts but stucks at "HTC" white splash screen; not even "quietly brilliant" comes up, it just stucks on the white screen with HTC... i dont know what to do, please help me someone? did i brick it? can it be repaired if i send it into HTC for repair? please help me!!
once again please guys im extremly sorry if im repeating a thread with this one, im new but i still searched for half an hour over the internet but with no vain. PLEASE REPLY!
its my first expensive phone, and its only been with me for 2 weeks, if this is ruined then my parents wont buy me any other phone.
*fingers-crossed*
Ok man don't panic, just re run the hack kit from the white screen. If it is not working just let me know....
Sent from my Inspire 4G using xda app-developers app
still nothing :/
glevitan said:
Ok man don't panic, just re run the hack kit from the white screen. If it is not working just let me know....
Sent from my Inspire 4G using xda app-developers app
Click to expand...
Click to collapse
tried that just now with the phone off and plugged in (constant orange light) and with the phone on and plugged in(white screen only, no LEDs) and the hack kit just shows the message :
***ERROR ERROR ERROR***
Phone not plugged in
OR
Driver not installed
OR
USB Debugging not enabled.
***ERROR ERROR ERROR***
the pressing vol up button+power button also doesnt do anything, and the screen sticks to the white part for hours :/
I can't help much since my phone is "away" in the insurance company.
But have tried reflash of RUU
Sent from my Desire HD using XDA Premium App
trying that :|
XDA_h3n said:
I can't help much since my phone is "away" in the insurance company.
But have tried reflash of RUU
Sent from my Desire HD using XDA Premium App
Click to expand...
Click to collapse
im downloading the custom ROM i found a link to online, which said that i should just connected the switched off phone and run the executable file. fingers scrossed and hoping it works.
believe me buddy; im craving for the one X or even the one S.
but i will get that only if i make through with the DESIRE HD for at-least a year lol, doesn't seem quite possible as of the situation right now.
Ashjerk said:
tried that just now with the phone off and plugged in (constant orange light) and with the phone on and plugged in(white screen only, no LEDs) and the hack kit just shows the message :
***ERROR ERROR ERROR***
Phone not plugged in
OR
Driver not installed
OR
USB Debugging not enabled.
***ERROR ERROR ERROR***
the pressing vol up button+power button also doesnt do anything, and the screen sticks to the white part for hours :/
Click to expand...
Click to collapse
Ok...You Need to reflash the Ruu....do You know how to Get the Cid number
RE:
glevitan said:
Ok...You Need to reflash the Ruu....do You know how to Get the Cid number
Click to expand...
Click to collapse
sorry my network was down. back on now, i dont know what the CiD number is, so yeah i dont know how to get it. sorry :/
Ashjerk said:
sorry my network was down. back on now, i dont know what the CiD number is, so yeah i dont know how to get it. sorry :/
Click to expand...
Click to collapse
Man are u online?? I am sending u a PM...
---------- Post added at 03:31 AM ---------- Previous post was at 03:15 AM ----------
Ashjerk said:
tried that just now with the phone off and plugged in (constant orange light) and with the phone on and plugged in(white screen only, no LEDs) and the hack kit just shows the message :
***ERROR ERROR ERROR***
Phone not plugged in
OR
Driver not installed
OR
USB Debugging not enabled.
***ERROR ERROR ERROR***
the pressing vol up button+power button also doesnt do anything, and the screen sticks to the white part for hours :/
Click to expand...
Click to collapse
ok...if you press power + volume up you will never get to hboot...it's volume + power down.
To get the cid number, just boot in hboot, choose fastboot and plug the phone until you see fastboot usb in red. Then open a cmd in the pc and type fastboot getvar all. INFOcidnum is the information u need to get the ruu,
RE:
glevitan said:
Man are u online?? I am sending u a PM...
---------- Post added at 03:31 AM ---------- Previous post was at 03:15 AM ----------
ok...if you press power + volume up you will never get to hboot...it's volume + power down.
To get the cid number, just boot in hboot, choose fastboot and plug the phone until you see fastboot usb in red. Then open a cmd in the pc and type fastboot getvar all. INFOcidnum is the information u need to get the ruu,
Click to expand...
Click to collapse
yo if you're still there; i tried running the RUU executable file and after trying to read from my android phone, it says "error[170]: USB connection error".
Hopefully you get everything figured out dude
Ashjerk said:
yo if you're still there; i tried running the RUU executable file and after trying to read from my android phone, it says "error[170]: USB connection error".
Click to expand...
Click to collapse
Be patient, he'll sort things out.
@glevitan - lol..... second time I see you giving the instructions with the volume + power. You gotta remember it's volume down + power button
Sent from a dream.
I have exactly the same problem.
I cannot run a RUU as my computer won't detect the phone is connected via USB.
Any ideas? I've literally spent the past 4 hours trying to fix it.
klawsterfobik said:
I have exactly the same problem.
I cannot run a RUU as my computer won't detect the phone is connected via USB.
Any ideas? I've literally spent the past 4 hours trying to fix it.
Click to expand...
Click to collapse
Try installing the htc drivers/sync on your computer.
Sent from a dream.
Teichopsia said:
Try installing the htc drivers/sync on your computer.
Sent from a dream.
Click to expand...
Click to collapse
Done, but with no luck. The computer recognizes that the phone has been connected (it beeps and shows "Android Phone - Android Bootloader Interface") but I can't access it like a disk drive.
When I try to run the RUU I get an error saying it can't connect to the USB port...
** I un-installed, then re-installed HTC Sync and it picked the phone up and installed the drivers. So i'm doing the RUU at the moment and all seems to be running sweet. Its just finished and re-starting for the first time in a couple of hours! **
I'll try this rooting thing again eh!
Dont install HTC sync and disconnect ur computer from interner
klawsterfobik said:
Done, but with no luck. The computer recognizes that the phone has been connected (it beeps and shows "Android Phone - Android Bootloader Interface") but I can't access it like a disk drive.
When I try to run the RUU I get an error saying it can't connect to the USB port...
** I un-installed, then re-installed HTC Sync and it picked the phone up and installed the drivers. So i'm doing the RUU at the moment and all seems to be running sweet. Its just finished and re-starting for the first time in a couple of hours! **
I'll try this rooting thing again eh!
Click to expand...
Click to collapse
While using the ace hack dont install HTC sync use the drivers given in "*\tools\windrivers" folder
Most importantly Do not connect your computer to the internet As the driver manager checks for the latest drivers in microsoft website.. I was stuck there for a long time but nothing happened..
when ur not connected to internet it will take the drivers of "Android 1" which is already installed by installing "HTCDriver3.0.0.007.exe" from "*\tools\windrivers" folder.
Comin back the boot screen. Only HTC was visible on the screen after rooting but started the Ace hack again which removed this problem
You'll have a more successful ROOT if you use Ubuntu or a Ubuntu Live CD as I assume your using Windows right ? I used Ubuntu and rooted first time with no problems.
Thanks very
Ashjerk said:
i Couldn't find my problem in the forums im sorry if im repeating it, seriously... im sorry. its about my HTC Desire HD.
i was using Advanced Ace Hack Kit and everything was fine, i downloaded the ROM as the cmd asked me to, installed it, rebooted it twice accroding to the cmd, but then it said something about pressing power button once this step finishes, and thats when my phone got stuck, the volume keys werent working and neither was the power key, just then my power went out and everything crashed!!
now when i turn on my HTC DESIRE HD, it starts but stucks at "HTC" white splash screen; not even "quietly brilliant" comes up, it just stucks on the white screen with HTC... i dont know what to do, please help me someone? did i brick it? can it be repaired if i send it into HTC for repair? please help me!!
once again please guys im extremly sorry if im repeating a thread with this one, im new but i still searched for half an hour over the internet but with no vain. PLEASE REPLY!
its my first expensive phone, and its only been with me for 2 weeks, if this is ruined then my parents wont buy me any other phone.
*fingers-crossed*
Click to expand...
Click to collapse
i was in the exact same situation. All you have to do is connect your phone to your pc while its stuck on ''HTC'' boot screen. Wait for like a minute then use cmd and write 'adb reboot bootloader'. You should be able to fix it yourself from there
EDIT: doesnt work once bootloader is unlocked T_T im stuck on the white screen again...
IBeKay said:
i was in the exact same situation. All you have to do is connect your phone to your pc while its stuck on ''HTC'' boot screen. Wait for like a minute then use cmd and write 'adb reboot bootloader'. You should be able to fix it yourself from there
EDIT: doesnt work once bootloader is unlocked T_T im stuck on the white screen again...
Click to expand...
Click to collapse
Reflash a stock rooted rom and it's boot.img (found in the zip) and it will work.Or any custom.
Steam. said:
Reflash a stock rooted rom and it's boot.img (found in the zip) and it will work.Or any custom.
Click to expand...
Click to collapse
I would but there is no way of me getting to bootloader or recovery unless I force it into them, which I cant because I unlocked bootloader...
Hi there
I have recently brought a HTC ONE X second hand from a friend,
Im using the latest OS on my macbook pro and im trying to connect my new HTC to my sync manager but not having much success,
I have tried all the usual still developers usb debugging etc but still says unable to connect anyone have any advice or help please?
kind regards
Shane
shaneuk said:
Hi there
I have recently brought a HTC ONE X second hand from a friend,
Im using the latest OS on my macbook pro and im trying to connect my new HTC to my sync manager but not having much success,
I have tried all the usual still developers usb debugging etc but still says unable to connect anyone have any advice or help please?
kind regards
Shane
Click to expand...
Click to collapse
does your macbook recognises the device? Maybe your usb cable or drivers are problem?
hi
hiya
yes it says phone connected but nothing else
i can view music and photos but nothing more it says devise not found please reconnect phone yet when i try the home screen on sync manager it says phone connected loading data but nothing!!!
Dear Friends,
I have Samsung Grand I9082 that was stuck on logo screen.
I tried to flash it many times but I failed because I had the problem of "VHX_21nm_3bitMLC_8GB_p10"
So I downloaded the full flash files from this post in "http://forum.gsmhosting.com/vbb/f684/help-samsung-i9082-hank-logo-1780647/".
In the download mode I selected all files ((except the pda file)).
The download process is completed successfully and the phone restarted then screen became blank.
Now the phone is dead I can't open it in any mode even it doesn't be charged and the pc can't recognize it.
:crying:
Please I need your help.
Thanks in advance.
Go through the flashing guides again.
The pda file is which is the ROM file.
DMJoh said:
Go through the flashing guides again.
The pda file is which is the ROM file.
Click to expand...
Click to collapse
The problem that I cann't open my phone in any mode download or recovery mode.
PC cann't recognize the phone if i connected it
Did I lose my phone??
agsao said:
Did I lose my phone??
Click to expand...
Click to collapse
If it doesn't start then
Be prepaid to buy a new device.
Preshak said:
If it doesn't start then
Be prepaid to buy a new device.
Click to expand...
Click to collapse
I think the problem is software problem so it could solved.
When I connect the phone to PC it is recognized as unknown device not as previous which I could recognize it by Odin.
agsao said:
I think the problem is software problem so it could solved.
When I connect the phone to PC it is recognized as unknown device not as previous which I could recognize it by Odin.
Click to expand...
Click to collapse
Same thing happened with me last year...!!!!
I flashed a firmware using odin on my note...
I flashed wrong firmware for my note.
Aftr many attempts Odin was saying unrecognised device...!!!
I hard bricked my note...!!!!
Screen was blank..!!!
Ask help from dev.!! Pm them..!!
Hope dev can save your mobile...!!!
Try using heimdell..!!!
Its a software For bricked samsung mobiles...!!!
I think that the following post may help:
http://forum.xda-developers.com/showthread.php?t=2369125
But I need experts help.
hmm
its easy open odin connect your phone with pc in switched off mode ( remove battery before connecting to pc & when connected insert battery ) press vol down + home + power hopefully that should work for you cause the issue is windows don't install proper drivers & pc keeps showing unknown usb device connected or similar bla bla bla i don't know what this does but i am in similar situation almost 5-7 times till now with diff samsung models & this always worked for me hopefully for you too may work good luck ! :fingers-crossed:
BEingNiCK said:
hmm
its easy open odin connect your phone with pc in switched off mode ( remove battery before connecting to pc & when connected insert battery ) press vol down + home + power hopefully that should work for you cause the issue is windows don't install proper drivers & pc keeps showing unknown usb device connected or similar bla bla bla i don't know what this does but i am in similar situation almost 5-7 times till now with diff samsung models & this always worked for me hopefully for you too may work good luck ! :fingers-crossed:
Click to expand...
Click to collapse
Good to see you back.
BEingNiCK said:
hmm
its easy open odin connect your phone with pc in switched off mode ( remove battery before connecting to pc & when connected insert battery ) press vol down + home + power hopefully that should work for you cause the issue is windows don't install proper drivers & pc keeps showing unknown usb device connected or similar bla bla bla i don't know what this does but i am in similar situation almost 5-7 times till now with diff samsung models & this always worked for me hopefully for you too may work good luck ! :fingers-crossed:
Click to expand...
Click to collapse
Dear,
Thanks for your reply.
I've tried many times but I failed, the phone can't be detected by Pc nor ODIN.
I went to maintenance store and they told me that it need the bootloader to be installed and they failed to flash it using JTAG box.
What Can I Do!!!!!
akiratoriyama said:
Good to see you back.
Click to expand...
Click to collapse
not yet bro still busy with personal
---------- Post added at 12:52 AM ---------- Previous post was at 12:49 AM ----------
agsao said:
Dear,
Thanks for your reply.
I've tried many times but I failed, the phone can't be detected by Pc nor ODIN.
I went to maintenance store and they told me that it need the bootloader to be installed and they failed to flash it using JTAG box.
What Can I Do!!!!!
Click to expand...
Click to collapse
oops that hurts there is only 1 way you can make it work again i had same issue yesterday with s7562 just a few minutes before got known how to fix this & the only thing that worked for me was this thread
http://forum.xda-developers.com/showthread.php?t=2317311
don't forget to press thanks for OP, if it works for you :highfive: good luck !
BEingNiCK said:
not yet bro still busy with personal
---------- Post added at 12:52 AM ---------- Previous post was at 12:49 AM ----------
oops that hurts there is only 1 way you can make it work again i had same issue yesterday with s7562 just a few minutes before got known how to fix this & the only thing that worked for me was this thread
http://forum.xda-developers.com/showthread.php?t=2317311
don't forget to press thanks for OP, if it works for you :highfive: good luck !
Click to expand...
Click to collapse
What is the specific post number do you think it will solve my problem??
I think that this thread is about flashing phone under Ubuntu, but I can't start my phone!!!
agsao said:
What is the specific post number do you think it will solve my problem??
I think that this thread is about flashing phone under Ubuntu, but I can't start my phone!!!
Click to expand...
Click to collapse
previously you didn't mentioned that your phone don't even start, as per your later post you said it is recognized as unknown device that means device is able to response to your computer
& if all above is correct then flashing through ubuntu or any linux distro is only your last option cause there is no such thing as unknown device in ubuntu
i had a similar phone that won't boot in recovery nor download mode only blank black screen i tried many option but ubuntu was life saver for me, try it its worth :good:
Dear Friend,
Thanks for your reply.
BEingNiCK said:
previously you didn't mentioned that your phone don't even start, as per your later post you said it is recognized as unknown device that means device is able to response to your computer
Click to expand...
Click to collapse
If you read the title of my thread and the first post you will discover that my phone can't be turn on.
Anyway should I have Ubuntu or could I try this on PartedMagic live cd?
agsao said:
I think the problem is software problem so it could solved.
When I connect the phone to PC it is recognized as unknown device not as previous which I could recognize it by Odin.
Click to expand...
Click to collapse
this .
BEingNiCK said:
this .
Click to expand...
Click to collapse
Yes, Phone doesn't start (no screen, no download mode, no recovery mode, and can't be recognized by ODIN)
But when I connect it to the PC I hear the sound of the connected USB (from windows themes) and in the devices manager it's found as unknown device
agsao said:
Yes, Phone doesn't start (no screen, no download mode, no recovery mode, and can't be recognized by ODIN)
But when I connect it to the PC I hear the sound of the connected USB (from windows themes) and in the devices manager it's found as unknown device
Click to expand...
Click to collapse
seems hard bricked
here are few option the best is USB JIG buy it from ebay or amazon USB JIG costs no more then 200Rs ( 3-4 dollar )
second alternative ways am attaching links this helped me few times so i always have them bookmarked may work for you too but i still prefer USB JIG method
http://forum.xda-developers.com/showthread.php?t=1242466
http://en.miui.com/thread-14903-1-1.html
BEingNiCK said:
seems hard bricked
here are few option the best is USB JIG buy it from ebay or amazon USB JIG costs no more then 200Rs ( 3-4 dollar )
second alternative ways am attaching links this helped me few times so i always have them bookmarked may work for you too but i still prefer USB JIG method
http://forum.xda-developers.com/showthread.php?t=1242466
http://en.miui.com/thread-14903-1-1.html
Click to expand...
Click to collapse
Dear friend,
Thanks for your concern.
I have created a USB JIG and it doesn't work, then I've bought a new and it also doesn't work.
I've to check the links that you've post.
Regards,
i was trying to flash lollipop rooted stuck room via qpst i was in download mood connected the phone and it reads as 9008 and i press download .. everything was fine it was loading system.img and i got this error
it says download fail firehose fail firehose fail download finish .
after this the phone is not responding to any key i press and it doesn't show when i connect it to pc and qpst can't see the device also .. i don't know what to do to unbrick it .. pls help
mohamed_ragab09 said:
i was trying to flash lollipop rooted stuck room via qpst i was in download mood connected the phone and it reads as 9008 and i press download .. everything was fine it was loading system.img and i got this error
it says download fail firehose fail firehose fail download finish .
after this the phone is not responding to any key i press and it doesn't show when i connect it to pc and qpst can't see the device also .. i don't know what to do to unbrick it .. pls help
Click to expand...
Click to collapse
Can you get into download mode?
i tried to press power + volume uo or down but nothing happen
mohamed_ragab09 said:
i tried to press power + volume uo or down but nothing happen
Click to expand...
Click to collapse
Press voulme up and connect to pc.
is there a way to get into fastboot other than power+volume down ?
via adb or something ?
mohamed_ragab09 said:
i tried to press power + volume uo or down but nothing happen
Click to expand...
Click to collapse
Try volume up+connect phone to PC. If it isn't detected try charging it for 30 minutes and then the same thing. If that doesn't work try a different USB cable and/or different USB port on your PC.
i will try and get back to you .. thank you so much i appreciate your help
mohamed_ragab09 said:
i will try and get back to you .. thank you so much i appreciate your help
Click to expand...
Click to collapse
Any news?
NeptunePH said:
Try volume up+connect phone to PC. If it isn't detected try charging it for 30 minutes and then the same thing. If that doesn't work try a different USB cable and/or different USB port on your PC.
Click to expand...
Click to collapse
i tried with no luck the phone cant be detected although it was being detected before the failed flashing attempt .. can windows 10 64 bit be the problem here ? what else can i do to unbrick the phone ?
and i get a message that the usb not recognized or malfunctioned
mohamed_ragab09 said:
and i get a message that the usb not recognized or malfunctioned
Click to expand...
Click to collapse
That sounds exactly like the situation I had. Your motherboard is probably fried. Get it to your service center. Especially if you have the warranty.
NeptunePH said:
That sounds exactly like the situation I had. Your motherboard is probably fried. Get it to your service center. Especially if you have the warranty.
Click to expand...
Click to collapse
im out of warranty .. is there is another way ? what did you do ?
in another note : i gave it to a friend who understand some maintenance and he managed make the device readable when you connect it to pc .. and it was showing 9008 on his pc .. but when i took it home and connect it to mine it shows the first time but then it started to show me usb not recognized again after i removed it .. i don't know what this means .. i gave it back to him to try make it readable again .. his pc is win 7 .. mine is win 10 .. what do you make of that ?
mohamed_ragab09 said:
im out of warranty .. is there is another way ? what did you do ?
in another note : i gave it to a friend who understand some maintenance and he managed make the device readable when you connect it to pc .. and it was showing 9008 on his pc .. but when i took it home and connect it to mine it shows the first time but then it started to show me usb not recognized again after i removed it .. i don't know what this means .. i gave it back to him to try make it readable again .. his pc is win 7 .. mine is win 10 .. what do you make of that ?
Click to expand...
Click to collapse
I was in the same situation. For me sometimes I got port 9008 and sometimes USB device not recognized. However every time I got a Sahara Fail. Keep trying to flash the s288 row with different cables/ports. That's all I can think of.
NeptunePH said:
I was in the same situation. For me sometimes I got port 9008 and sometimes USB device not recognized. However every time I got a Sahara Fail. Keep trying to flash the s288 row with different cables/ports. That's all I can think of.
Click to expand...
Click to collapse
what exactly did work for you ?
mohamed_ragab09 said:
what exactly did work for you ?
Click to expand...
Click to collapse
I tried every method possible but nothing worked. Since I was under warranty I took it to a service center where they told me the Motherboard was fried.
Oppssss mother board fried.... Im listening this first time.
he managed to make it readable again and we flashed the rom on his pc .. it went will and my p1 is on again .. thank you for the help
hi can you be speciific
mohamed_ragab09 said:
he managed to make it readable again and we flashed the rom on his pc .. it went will and my p1 is on again .. thank you for the help
Click to expand...
Click to collapse
HI.. can you get from your friend a step by step guide so that it can be useful for everyone facing the same problem..??
venkat7117 said:
HI.. can you get from your friend a step by step guide so that it can be useful for everyone facing the same problem..??
Click to expand...
Click to collapse
he just said he heated on the memory chips or something like that .. apparently the flashing problem was my win 10 device . because once the phone show 9008 com on flashing software the flash process went ok on his win 7 device
There's another thing that I would like to add. When the flashing fails and phone becomes dead(seems dead), it is not in a powered off state i.e. it actually is in a dormant state in some occasions. That is, it doesn't respond to any actions performed like plugging to pc, plugging charger e.t.c.
For older phones with a removable battery, we could simply remove the battery and turn the phone off completely before trying to flash again.
But since newer phones like our Vibe P1 doesn't have a removable battery, we need to switch the phone off manually.
There is a method for that given in this link.