Dear Friends,
I have Samsung Grand I9082 that was stuck on logo screen.
I tried to flash it many times but I failed because I had the problem of "VHX_21nm_3bitMLC_8GB_p10"
So I downloaded the full flash files from this post in "http://forum.gsmhosting.com/vbb/f684/help-samsung-i9082-hank-logo-1780647/".
In the download mode I selected all files ((except the pda file)).
The download process is completed successfully and the phone restarted then screen became blank.
Now the phone is dead I can't open it in any mode even it doesn't be charged and the pc can't recognize it.
:crying:
Please I need your help.
Thanks in advance.
Go through the flashing guides again.
The pda file is which is the ROM file.
DMJoh said:
Go through the flashing guides again.
The pda file is which is the ROM file.
Click to expand...
Click to collapse
The problem that I cann't open my phone in any mode download or recovery mode.
PC cann't recognize the phone if i connected it
Did I lose my phone??
agsao said:
Did I lose my phone??
Click to expand...
Click to collapse
If it doesn't start then
Be prepaid to buy a new device.
Preshak said:
If it doesn't start then
Be prepaid to buy a new device.
Click to expand...
Click to collapse
I think the problem is software problem so it could solved.
When I connect the phone to PC it is recognized as unknown device not as previous which I could recognize it by Odin.
agsao said:
I think the problem is software problem so it could solved.
When I connect the phone to PC it is recognized as unknown device not as previous which I could recognize it by Odin.
Click to expand...
Click to collapse
Same thing happened with me last year...!!!!
I flashed a firmware using odin on my note...
I flashed wrong firmware for my note.
Aftr many attempts Odin was saying unrecognised device...!!!
I hard bricked my note...!!!!
Screen was blank..!!!
Ask help from dev.!! Pm them..!!
Hope dev can save your mobile...!!!
Try using heimdell..!!!
Its a software For bricked samsung mobiles...!!!
I think that the following post may help:
http://forum.xda-developers.com/showthread.php?t=2369125
But I need experts help.
hmm
its easy open odin connect your phone with pc in switched off mode ( remove battery before connecting to pc & when connected insert battery ) press vol down + home + power hopefully that should work for you cause the issue is windows don't install proper drivers & pc keeps showing unknown usb device connected or similar bla bla bla i don't know what this does but i am in similar situation almost 5-7 times till now with diff samsung models & this always worked for me hopefully for you too may work good luck ! :fingers-crossed:
BEingNiCK said:
hmm
its easy open odin connect your phone with pc in switched off mode ( remove battery before connecting to pc & when connected insert battery ) press vol down + home + power hopefully that should work for you cause the issue is windows don't install proper drivers & pc keeps showing unknown usb device connected or similar bla bla bla i don't know what this does but i am in similar situation almost 5-7 times till now with diff samsung models & this always worked for me hopefully for you too may work good luck ! :fingers-crossed:
Click to expand...
Click to collapse
Good to see you back.
BEingNiCK said:
hmm
its easy open odin connect your phone with pc in switched off mode ( remove battery before connecting to pc & when connected insert battery ) press vol down + home + power hopefully that should work for you cause the issue is windows don't install proper drivers & pc keeps showing unknown usb device connected or similar bla bla bla i don't know what this does but i am in similar situation almost 5-7 times till now with diff samsung models & this always worked for me hopefully for you too may work good luck ! :fingers-crossed:
Click to expand...
Click to collapse
Dear,
Thanks for your reply.
I've tried many times but I failed, the phone can't be detected by Pc nor ODIN.
I went to maintenance store and they told me that it need the bootloader to be installed and they failed to flash it using JTAG box.
What Can I Do!!!!!
akiratoriyama said:
Good to see you back.
Click to expand...
Click to collapse
not yet bro still busy with personal
---------- Post added at 12:52 AM ---------- Previous post was at 12:49 AM ----------
agsao said:
Dear,
Thanks for your reply.
I've tried many times but I failed, the phone can't be detected by Pc nor ODIN.
I went to maintenance store and they told me that it need the bootloader to be installed and they failed to flash it using JTAG box.
What Can I Do!!!!!
Click to expand...
Click to collapse
oops that hurts there is only 1 way you can make it work again i had same issue yesterday with s7562 just a few minutes before got known how to fix this & the only thing that worked for me was this thread
http://forum.xda-developers.com/showthread.php?t=2317311
don't forget to press thanks for OP, if it works for you :highfive: good luck !
BEingNiCK said:
not yet bro still busy with personal
---------- Post added at 12:52 AM ---------- Previous post was at 12:49 AM ----------
oops that hurts there is only 1 way you can make it work again i had same issue yesterday with s7562 just a few minutes before got known how to fix this & the only thing that worked for me was this thread
http://forum.xda-developers.com/showthread.php?t=2317311
don't forget to press thanks for OP, if it works for you :highfive: good luck !
Click to expand...
Click to collapse
What is the specific post number do you think it will solve my problem??
I think that this thread is about flashing phone under Ubuntu, but I can't start my phone!!!
agsao said:
What is the specific post number do you think it will solve my problem??
I think that this thread is about flashing phone under Ubuntu, but I can't start my phone!!!
Click to expand...
Click to collapse
previously you didn't mentioned that your phone don't even start, as per your later post you said it is recognized as unknown device that means device is able to response to your computer
& if all above is correct then flashing through ubuntu or any linux distro is only your last option cause there is no such thing as unknown device in ubuntu
i had a similar phone that won't boot in recovery nor download mode only blank black screen i tried many option but ubuntu was life saver for me, try it its worth :good:
Dear Friend,
Thanks for your reply.
BEingNiCK said:
previously you didn't mentioned that your phone don't even start, as per your later post you said it is recognized as unknown device that means device is able to response to your computer
Click to expand...
Click to collapse
If you read the title of my thread and the first post you will discover that my phone can't be turn on.
Anyway should I have Ubuntu or could I try this on PartedMagic live cd?
agsao said:
I think the problem is software problem so it could solved.
When I connect the phone to PC it is recognized as unknown device not as previous which I could recognize it by Odin.
Click to expand...
Click to collapse
this .
BEingNiCK said:
this .
Click to expand...
Click to collapse
Yes, Phone doesn't start (no screen, no download mode, no recovery mode, and can't be recognized by ODIN)
But when I connect it to the PC I hear the sound of the connected USB (from windows themes) and in the devices manager it's found as unknown device
agsao said:
Yes, Phone doesn't start (no screen, no download mode, no recovery mode, and can't be recognized by ODIN)
But when I connect it to the PC I hear the sound of the connected USB (from windows themes) and in the devices manager it's found as unknown device
Click to expand...
Click to collapse
seems hard bricked
here are few option the best is USB JIG buy it from ebay or amazon USB JIG costs no more then 200Rs ( 3-4 dollar )
second alternative ways am attaching links this helped me few times so i always have them bookmarked may work for you too but i still prefer USB JIG method
http://forum.xda-developers.com/showthread.php?t=1242466
http://en.miui.com/thread-14903-1-1.html
BEingNiCK said:
seems hard bricked
here are few option the best is USB JIG buy it from ebay or amazon USB JIG costs no more then 200Rs ( 3-4 dollar )
second alternative ways am attaching links this helped me few times so i always have them bookmarked may work for you too but i still prefer USB JIG method
http://forum.xda-developers.com/showthread.php?t=1242466
http://en.miui.com/thread-14903-1-1.html
Click to expand...
Click to collapse
Dear friend,
Thanks for your concern.
I have created a USB JIG and it doesn't work, then I've bought a new and it also doesn't work.
I've to check the links that you've post.
Regards,
Related
Hi there! First of all I don't speak english very well.
My Galaxy Nexus hard bricked yesterday.
tl;dr no boot animation, no recovery mode, no download mode, no response from computer.
I thought it had just a low battery level, I found it turned off. So I tried to recharge it but it gave no signals, no battery icon, nothing.
After an all night long recharge I tried to turn it on, to enter in download mode or in recovery mode but nothing works. I also tried to connect it with my computer with and without battery, no response, no "OMAP" device found, no sound from Windows for plugging it in, nothing.
I found this thread here in xda, many people has been redirected to it and found their solution to the brick problem.
I tried to follow all the steps but when I plug in the phone and start the .bat file nothing happens, just stuck on "Waiting for device".
The phone is unlocked and rooted. I'm running AOKP JB-MR1 Build 2 and Franco Kernel for a month, never had problems with them, never installed other ROMs after that.
What should I do now? Should I try to do something or just bring it to a support center? The phone is still in warranty, there would be any problem because it has a non-stock ROM?
I've red about a jig to force the Odin mode, should I buy it? (I found this one)
Thanks for the help.
Have you tried booting into Odin mode
ntb81 said:
Have you tried booting into Odin mode
Click to expand...
Click to collapse
Yes, it doesn't work.
have you your warranty on it?
return it and get a new one
It's hard bricked and a JTAG unit may force it into download mode, if you send it in for warranty, chances are it won't be accepted as it was obviously tampered with and they would find out that your bootloader is unlocked and charge you more money than the device is actually worth to fix it.
I don't understand how it could of bricked if nothing has changed on the phone for a month or longer. Nothing was flashed recently so how can you hard brick the phone?
Beauenheim said:
It's hard bricked and a JTAG unit may force it into download mode, if you send it in for warranty, chances are it won't be accepted as it was obviously tampered with and they would find out that your bootloader is unlocked and charge you more money than the device is actually worth to fix it.
Click to expand...
Click to collapse
Yeah, that's why I'm not sure to send it in for warranty. So have I to try with a JTAG first?
[bman123] said:
I don't understand how it could of bricked if nothing has changed on the phone for a month or longer. Nothing was flashed recently so how can you hard brick the phone?
Click to expand...
Click to collapse
I'm not understanding that too, I don't know what happened. Suddendly it stopped working. Maybe is just a battery problem, I'll try to use another one before bringing it to the shop where I bought it.
same happened to me, but I have an untouched phone with stock android. it worked well for over an year until today.
I see a lot of people having same issue, but they say that when connected to PC over USB the phone is recognized as OMAP.
for me the PC doesn't do anything...
any help? thanks
---------- Post added at 06:12 AM ---------- Previous post was at 06:02 AM ----------
galiganu said:
same happened to me, but I have an untouched phone with stock android. it worked well for over an year until today.
I see a lot of people having same issue, but they say that when connected to PC over USB the phone is recognized as OMAP.
for me the PC doesn't do anything...
any help? thanks
Click to expand...
Click to collapse
so right after I wrote that I plugged my phone into USB of my PC without battery. when I inserted the battery it started showing me the battery sign and I could started the phone. 3 minutes later it went black again, but the trick didnt work again.
any ideas? thanks
Try This !!
Arrange a 4 ohm resistor and try to attach it in ur usb plug port of phone ..it 'll force the phon eto go in download mode or say Fastboot mode.
then follow a tutorial to flash any rom..
its quite easy else ping me !!
Tech.Nik said:
Arrange a 4 ohm resistor and try to attach it in ur usb plug port of phone ..it 'll force the phon eto go in download mode or say Fastboot mode.
then follow a tutorial to flash any rom..
its quite easy else ping me !!
Click to expand...
Click to collapse
Please could you explain a bit more how to go about this? I have a Verizon Galaxy Nexus in a somewhat similar condition. This one is recognised as an OMAP 4430 device. I downloaded OMAP Flasher, installed drivers and tried to bring it back to life but after running the batch file I get this error: Operation FAILED (Remote: : Driver init error 0x00FF8080 - MMC CONFIG FAILURE). Can the resistor trick work on this and if yes, how can I go about it? I am not faint-hearted; I think I can handle it if given the right instructions.
After I tried everything i could from the internet, I went to a shop and tested to see if the USB is broken - and indeed it was. I replaced the USB component of the phone and after that it started.
Thanks guys
galiganu said:
After I tried everything i could from the internet, I went to a shop and tested to see if the USB is broken - and indeed it was. I replaced the USB component of the phone and after that it started.
Thanks guys
Click to expand...
Click to collapse
Yeah, the faulty USB port is a very common issue.
I downloaded ROM MANAGER app, and I used the option "Install ROM from SD CARD" to try to install the official ROM V20e.zip. During the process, and restart the device no longer functions.
the device gives no heartbeat, no charge, no power on. The PC does not recognize it when plugged into USB.
The device died ...
What do I do?
Thanks
RODELA said:
I downloaded ROM MANAGER app, and I used the option "Install ROM from SD CARD" to try to install the official ROM V20e.zip. During the process, and restart the device no longer functions.
the device gives no heartbeat, no charge, no power on. The PC does not recognize it when plugged into USB.
The device died ...
What do I do?
Thanks
Click to expand...
Click to collapse
You need to manually enter recovery. I don't have that phone so I don't kbiw if that rom is even the correct rom for your phone. To enter recovery on most devices hold volume up, home button and power. Roms are flashed in recovery not apps.
Sent from my SGH-I317 using xda app-developers app
markbencze said:
You need to manually enter recovery. I don't have that phone so I don't kbiw if that rom is even the correct rom for your phone. To enter recovery on most devices hold volume up, home button and power. Roms are flashed in recovery not apps.
Sent from my SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
I can not enter in recovery mode because the device even power on! Any button not working
RODELA said:
I can not enter in recovery mode because the device even power on! Any button not working
Click to expand...
Click to collapse
And is your battery full? Does adb recognize it?
If the rom is definitely for your phone I don't believe you've actually hard bricked.
U may wanna check that
? http://bit.ly/18WHgY4 ?
markbencze said:
And is your battery full? Does adb recognize it?
If the rom is definitely for your phone I don't believe you've actually hard bricked.
U may wanna check that
Click to expand...
Click to collapse
Battery was arround 80%...
Adb Shell says: device not found.
This device is not sold in my contry (Brazil), and probaly LG will not make any kind of concert...
I'm losing hope
RODELA said:
Battery was arround 80%...
Adb Shell says: device not found.
This device is not sold in my contry (Brazil), and probaly LG will not make any kind of concert...
I'm losing hope
Click to expand...
Click to collapse
Search man. Dont give up yet. Are you 100% sure that rom u tried to flash was for your device? If it wasnt then yes u may have a brick. If you're sure it was thwn keep searching there may be hope still. Maybe even try the method u used to root in tge first place?
? http://bit.ly/18WHgY4 ?
It might bricked
At first make sure your battery is healthy and try to charge it,then use one of unbrick methods available,take your phone to download mode and flash one of official p936 *.KDZ roms
it's better to flash android 2.3 versions for unbricking
Sent from my LG-P930 using Tapatalk 2
try boot this way
hold vol. up while plug ur usb cable on pc the phone should enter in download mode if ur unable to enter in D/L Mode May bricked ur phone
---------- Post added at 10:38 AM ---------- Previous post was at 10:34 AM ----------
altvolt74 said:
hold vol. up while plug ur usb cable on pc the phone should enter in download mode if ur unable to enter in D/L Mode May bricked ur phone
Click to expand...
Click to collapse
if u see QHSUSB_DLOAD on ur PC Driver manager is posible that ur are hard bricked the only way to fix http://unlimited.io/qhsusbdload.htm (note) that this is for htc phone and u need Linux not sure if this will work on LG have carefull and good luck
markbencze said:
Search man. Dont give up yet. Are you 100% sure that rom u tried to flash was for your device? If it wasnt then yes u may have a brick. If you're sure it was thwn keep searching there may be hope still. Maybe even try the method u used to root in tge first place?
Click to expand...
Click to collapse
Sorry,, what is"tge"?
altvolt74 said:
hold vol. up while plug ur usb cable on pc the phone should enter in download mode if ur unable to enter in D/L Mode May bricked ur phone
---------- Post added at 10:38 AM ---------- Previous post was at 10:34 AM ----------
if u see QHSUSB_DLOAD on ur PC Driver manager is posible that ur are hard bricked the only way to fix [...]
Click to expand...
Click to collapse
Exactly, i see "QHSUS_DLOAD"....
I followed the procedure u indicate, but in the end appears "QDL reset", and the phone remains the same :/
HELPPP
RODELA said:
Exactly, i see "QHSUS_DLOAD"....
I followed the procedure u indicate, but in the end appears "QDL reset", and the phone remains the same :/
HELPPP
Click to expand...
Click to collapse
Yeah not good. Basically the phone is an expensive paper weight now. I had the same thing happen to me a few months back and had to get a new phone. Your options:
1. Contact your phone company and see if it can be handled under warranty.
2. Contact LG.....same thing.
3. Spend $50-$100 on having a third party fix your phone.
4. Buy an expensive j-tag box and hard restore your ROM: http://forum.xda-developers.com/showthread.php?t=1628254&page=1
Sent from my LG-P930 using xda app-developers app
power button is broken.
Flashed an odin stock (tried multiple) and I m still getting stuck on samsung logo
with no power button, I cant get to recovery to wipe/reset
any ideas boys?
ordered the replacement power switch but it's a long wait for it to reach me. I not in the US currently
nabilbek said:
power button is broken.
Flashed an odin stock (tried multiple) and I m still getting stuck on samsung logo
with no power button, I cant get to recovery to wipe/reset
any ideas boys?
ordered the replacement power switch but it's a long wait for it to reach me. I not in the US currently
Click to expand...
Click to collapse
http://youtu.be/pqBgbN8NLjI
sounds crazy , but i did this to my sons t989 a year ago and still working-might be worth a try
Fasted12 said:
http://youtu.be/pqBgbN8NLjI
sounds crazy , but i did this to my sons t989 a year ago and still working-might be worth a try
Click to expand...
Click to collapse
tried a lot man
the button seems completely dead
nabilbek said:
tried a lot man
the button seems completely dead
Click to expand...
Click to collapse
you know, unless you have a touch recovery , getting there wont help with a bad power button
Fasted12 said:
you know, unless you have a touch recovery , getting there wont help with a bad power button
Click to expand...
Click to collapse
yep ... using latest twrp
but I dont think there is a way into recovery if you are unable to boot the phone and no power button
I need something like a odin flashable tar that wipes cache /resets (because this usually fixes the stuck on logo)
nabilbek said:
yep ... using latest twrp
but I dont think there is a way into recovery if you are unable to boot the phone and no power button
I need something like a odin flashable tar that wipes cache /resets (because this usually fixes the stuck on logo)
Click to expand...
Click to collapse
flashing anything with a fluky power button is very hazardous. If it goes off in the middle of something, your device could be toast.
I'd get it fixed before doing anything. if it can't be fixed....phone shopping time! [emoji106]
KJ said:
flashing anything with a fluky power button is very hazardous. If it goes off in the middle of something, your device could be toast.
I'd get it fixed before doing anything. if it can't be fixed....phone shopping time! [emoji106]
Click to expand...
Click to collapse
I ordered a new power switch but I am bad at waiting
nabilbek said:
I ordered a new power switch but I am bad at waiting
Click to expand...
Click to collapse
You're risking your phone flashing anything.
But its yours to do with as you wish. Just would suck to finally get that power button delivered....and not have a functioning phone to use it with.
nabilbek said:
I ordered a new power switch but I am bad at waiting
Click to expand...
Click to collapse
you could try installing adb http://forum.xda-developers.com/showthread.php?t=1853159
Fasted12 said:
you could try installing adb http://forum.xda-developers.com/showthread.php?t=1853159
Click to expand...
Click to collapse
I am aware and have adb. thing is phone is bricked after last update (stuck at logo)
so i can only get into download mode ....wish there was a way to get from download to recovery but I cant find any
without the use of the power button ofc ...
nabilbek said:
I am aware and have adb. thing is phone is bricked after last update (stuck at logo)
so i can only get into download mode ....wish there was a way to get from download to recovery but I cant find any
without the use of the power button ofc ...
Click to expand...
Click to collapse
sorry man, hope the button install goes well
hmm
Fasted12 said:
sorry man, hope the button install goes well
Click to expand...
Click to collapse
i have the same exact problem minus my power button, it works normal
and i get firmware upgrade encountered an issue
i get that screen when i normal boot it, try recovery, or download mode, everything results to firmware upgrade encountered an issue
not sure if i should post here with this or not, just letting you know
ovenbird said:
i have the same exact problem minus my power button, it works normal
and i get firmware upgrade encountered an issue
i get that screen when i normal boot it, try recovery, or download mode, everything results to firmware upgrade encountered an issue
not sure if i should post here with this or not, just letting you know
Click to expand...
Click to collapse
i guess the question is, can you get your phone to download mode...
download mode
Fasted12 said:
i guess the question is, can you get your phone to download mode...
Click to expand...
Click to collapse
it reaches download mode no matter what i do ( the firmware error is in the download mode )
the problem is while in download mode nothing recognizes it ( its not normal download mode )
Im getting this :
I cant post links but this is the image i can send you
cdn.droidviews.com/wp-content/uploads/2013/09/Firmware-upgrade-encountered-an-issue jpg
put a DOT in there
ovenbird said:
it reaches download mode no matter what i do ( the firmware error is in the download mode )
the problem is while in download mode nothing recognizes it ( its not normal download mode )
Im getting this :
I cant post links but this is the image i can send you
cdn.droidviews.com/wp-content/uploads/2013/09/Firmware-upgrade-encountered-an-issue jpg
put a DOT in there
Click to expand...
Click to collapse
if kies wont recognize, nor will odin-i dont know--try reposting maybe get some new views, sorry
ovenbird said:
i have the same exact problem minus my power button, it works normal
and i get firmware upgrade encountered an issue
i get that screen when i normal boot it, try recovery, or download mode, everything results to firmware upgrade encountered an issue
not sure if i should post here with this or not, just letting you know
Click to expand...
Click to collapse
this happened with me once. long long time ago
But I swear I cant remember why
here try this : https://www.youtube.com/watch?v=GbAJH_mL6N4
another well explained guide for solving using kies : http://androidcentral.us/2013/09/how-to-fix-firmware-upgrade-encountered-an-issue-on-kies/
In case anyone doesn't know.....Odin won't see your device if kies is running. You need to kill the kies process. Make sure there's no mention of it in windows task manager.
Then, if your drivers are installed right....Odin should see your phone.
Also, I've always had the best luck with Odin 3.04.
---------- Post added at 07:31 PM ---------- Previous post was at 07:30 PM ----------
Or uninstall kies... I never once used it for anything.
KJ said:
In case anyone doesn't know.....Odin won't see your device if kies is running. You need to kill the kies process. Make sure there's no mention of it in windows task manager.
Then, if your drivers are installed right....Odin should see your phone.
Also, I've always had the best luck with Odin 3.04.
---------- Post added at 07:31 PM ---------- Previous post was at 07:30 PM ----------
Or uninstall kies... I never once used it for anything.
Click to expand...
Click to collapse
exactly ... kies is utter ****!
I would never recommend it too. A pure waste of time
Also, see what your phone shows as in windows device manager. If its listed with an "!" on it....the drivers may need to be reinstalled. If windows doesn't see it correctly, either will Odin. ?
Problem solved, I reinstalled drivers.
That simple.
Thanks for the video btw, I even added the guy from youtube channel
i was trying to flash lollipop rooted stuck room via qpst i was in download mood connected the phone and it reads as 9008 and i press download .. everything was fine it was loading system.img and i got this error
it says download fail firehose fail firehose fail download finish .
after this the phone is not responding to any key i press and it doesn't show when i connect it to pc and qpst can't see the device also .. i don't know what to do to unbrick it .. pls help
mohamed_ragab09 said:
i was trying to flash lollipop rooted stuck room via qpst i was in download mood connected the phone and it reads as 9008 and i press download .. everything was fine it was loading system.img and i got this error
it says download fail firehose fail firehose fail download finish .
after this the phone is not responding to any key i press and it doesn't show when i connect it to pc and qpst can't see the device also .. i don't know what to do to unbrick it .. pls help
Click to expand...
Click to collapse
Can you get into download mode?
i tried to press power + volume uo or down but nothing happen
mohamed_ragab09 said:
i tried to press power + volume uo or down but nothing happen
Click to expand...
Click to collapse
Press voulme up and connect to pc.
is there a way to get into fastboot other than power+volume down ?
via adb or something ?
mohamed_ragab09 said:
i tried to press power + volume uo or down but nothing happen
Click to expand...
Click to collapse
Try volume up+connect phone to PC. If it isn't detected try charging it for 30 minutes and then the same thing. If that doesn't work try a different USB cable and/or different USB port on your PC.
i will try and get back to you .. thank you so much i appreciate your help
mohamed_ragab09 said:
i will try and get back to you .. thank you so much i appreciate your help
Click to expand...
Click to collapse
Any news?
NeptunePH said:
Try volume up+connect phone to PC. If it isn't detected try charging it for 30 minutes and then the same thing. If that doesn't work try a different USB cable and/or different USB port on your PC.
Click to expand...
Click to collapse
i tried with no luck the phone cant be detected although it was being detected before the failed flashing attempt .. can windows 10 64 bit be the problem here ? what else can i do to unbrick the phone ?
and i get a message that the usb not recognized or malfunctioned
mohamed_ragab09 said:
and i get a message that the usb not recognized or malfunctioned
Click to expand...
Click to collapse
That sounds exactly like the situation I had. Your motherboard is probably fried. Get it to your service center. Especially if you have the warranty.
NeptunePH said:
That sounds exactly like the situation I had. Your motherboard is probably fried. Get it to your service center. Especially if you have the warranty.
Click to expand...
Click to collapse
im out of warranty .. is there is another way ? what did you do ?
in another note : i gave it to a friend who understand some maintenance and he managed make the device readable when you connect it to pc .. and it was showing 9008 on his pc .. but when i took it home and connect it to mine it shows the first time but then it started to show me usb not recognized again after i removed it .. i don't know what this means .. i gave it back to him to try make it readable again .. his pc is win 7 .. mine is win 10 .. what do you make of that ?
mohamed_ragab09 said:
im out of warranty .. is there is another way ? what did you do ?
in another note : i gave it to a friend who understand some maintenance and he managed make the device readable when you connect it to pc .. and it was showing 9008 on his pc .. but when i took it home and connect it to mine it shows the first time but then it started to show me usb not recognized again after i removed it .. i don't know what this means .. i gave it back to him to try make it readable again .. his pc is win 7 .. mine is win 10 .. what do you make of that ?
Click to expand...
Click to collapse
I was in the same situation. For me sometimes I got port 9008 and sometimes USB device not recognized. However every time I got a Sahara Fail. Keep trying to flash the s288 row with different cables/ports. That's all I can think of.
NeptunePH said:
I was in the same situation. For me sometimes I got port 9008 and sometimes USB device not recognized. However every time I got a Sahara Fail. Keep trying to flash the s288 row with different cables/ports. That's all I can think of.
Click to expand...
Click to collapse
what exactly did work for you ?
mohamed_ragab09 said:
what exactly did work for you ?
Click to expand...
Click to collapse
I tried every method possible but nothing worked. Since I was under warranty I took it to a service center where they told me the Motherboard was fried.
Oppssss mother board fried.... Im listening this first time.
he managed to make it readable again and we flashed the rom on his pc .. it went will and my p1 is on again .. thank you for the help
hi can you be speciific
mohamed_ragab09 said:
he managed to make it readable again and we flashed the rom on his pc .. it went will and my p1 is on again .. thank you for the help
Click to expand...
Click to collapse
HI.. can you get from your friend a step by step guide so that it can be useful for everyone facing the same problem..??
venkat7117 said:
HI.. can you get from your friend a step by step guide so that it can be useful for everyone facing the same problem..??
Click to expand...
Click to collapse
he just said he heated on the memory chips or something like that .. apparently the flashing problem was my win 10 device . because once the phone show 9008 com on flashing software the flash process went ok on his win 7 device
There's another thing that I would like to add. When the flashing fails and phone becomes dead(seems dead), it is not in a powered off state i.e. it actually is in a dormant state in some occasions. That is, it doesn't respond to any actions performed like plugging to pc, plugging charger e.t.c.
For older phones with a removable battery, we could simply remove the battery and turn the phone off completely before trying to flash again.
But since newer phones like our Vibe P1 doesn't have a removable battery, we need to switch the phone off manually.
There is a method for that given in this link.
I was doing some experiment with DriveDroid and now I am in big mess.
I think I messed up with drivedroid settings and I was not able to see my phone (oneplus 3 rooted LOS 15.1 ) on my computers.
I have tried different computers but all cant detect my phone.
I have tried drivedroid wizard, different usb systems, different usb settings and no luck.
I have tried uninstalling the drivedroid and still no luck.
The phone was going in charging mode only. Its was not going to MTP mode so I can see the phone internal storage in computer
I have tried to do factory reset also but no luck.
Now I mistakenly wiped data partition also and now the phone is with
No OS
No USB detection on phone while in TWRP
No OTG detection
No any ROM.zip file in phone memory.
When I am on TWRP and connect my phone in computer I am seeing same error message and cant see my phone interenal storage.
Now what to do? Any way to flash ROM ?
I am in big mess, and I dont want to spend money on new phone as of now
I hope someone will be my angle and suggest me something to recover and save me from this mess...
Crying out loud now...
Hi, i think you can use adb sideload with twrp
Uruloki64 said:
Hi, i think you can use adb sideload with twrp
Click to expand...
Click to collapse
Phone is not recognized in computer while in twrp mode so it is not able to connct to adb via USB.
Just get os flashed at OnePlus service center.
I did something same in my previous Samsung phone. I took it to service center and told em that it's not booting up and I don't know the reason. They flashed the firmware from scratch, charged me 250 INR and my phone was back to being normal.
aj141 said:
Just get os flashed at OnePlus service center.
I did something same in my previous Samsung phone. I took it to service center and told em that it's not booting up and I don't know the reason. They flashed the firmware from scratch, charged me 250 INR and my phone was back to being normal.
Click to expand...
Click to collapse
Ya.. going there tomorrow. Lets see what they say about it.
amit3880 said:
Ya.. going there tomorrow. Lets see what they say about it.
Click to expand...
Click to collapse
have u tried hard bricked tool for OP3? if not then try it
https://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700
Hayatzada said:
have u tried hard bricked tool for OP3? if not then try it
https://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700
Click to expand...
Click to collapse
I am not able to follow this as phone is not even coming in USB mode. So its actually soft bricked because can go to twrp and fastboot mode and booting up without OS but USB is not able to detect on my computer.
now the service center guys saying I need to change the motherboard which I dont think is the issue, mother board is not going gone for sure as I can boot up in twrp and fastboot mode. its just may be the usb host controller gone.
Cant decide if I should go ahead with mother board replacement at cost of 10k INR ( phone cost was 28K INR) .
amit3880 said:
I am not able to follow this as phone is not even coming in USB mode. So its actually soft bricked because can go to twrp and fastboot mode and booting up without OS but USB is not able to detect on my computer.
now the service center guys saying I need to change the motherboard which I dont think is the issue, mother board is not going gone for sure as I can boot up in twrp and fastboot mode. its just may be the usb host controller gone.
Cant decide if I should go ahead with mother board replacement at cost of 10k INR ( phone cost was 28K INR) .
Click to expand...
Click to collapse
If you use the Method 2 of the Unbrick Guide, you don't need normal adb/usb mode recognition. Follow that guide scrupulously and step by step. Don't skip any and don't rush.
tnsmani said:
If you use the Method 2 of the Unbrick Guide, you don't need normal adb/usb mode recognition. Follow that guide scrupulously and step by step. Don't skip any and don't rush.
Click to expand...
Click to collapse
We are giving an advice of 10K InR in free and he is not even interested according to his opinion,
Hayatzada said:
We are giving an advice of 10K InR in free and he is not even interested according to his opinion,
Click to expand...
Click to collapse
I even tried that but somehow it is not even recognized as QHUSB_BULK device.
believe me I have tried all things to revive the phone but its not hard brick in my opinion, it can boot into twrp but the when I connect the phone in computer it shows the error message I shown as attachment in my first post.
yes, I have tried 2 different computers and few usb cables.
amit3880 said:
I even tried that but somehow it is not even recognized as QHUSB_BULK device.
believe me I have tried all things to revive the phone but its not hard brick in my opinion, it can boot into twrp but the when I connect the phone in computer it shows the error message I shown as attachment in my first post.
yes, I have tried 2 different computers and few usb cables.
Click to expand...
Click to collapse
Your phone need not be hardbricked to use the Guide. It will work even on a normal perfectly working phone. If your phone is not recognised while following the Guide, it only means one of two things: either it is a hardware fault or you are not following the Guide properly.
amit3880 said:
I even tried that but somehow it is not even recognized as QHUSB_BULK device.
believe me I have tried all things to revive the phone but its not hard brick in my opinion, it can boot into twrp but the when I connect the phone in computer it shows the error message I shown as attachment in my first post.
yes, I have tried 2 different computers and few usb cables.
Click to expand...
Click to collapse
reviewed post
tnsmani said:
Your phone need not be hardbricked to use the Guide. It will work even on a normal perfectly working phone. If your phone is not recognised while following the Guide, it only means one of two things: either it is a hardware fault or you are not following the Guide properly.
Click to expand...
Click to collapse
tried to follow the unbrick guide on windows 10 but phone is not seen as QSBULK device in device manager.
I am going to try on windows 7 as few post said that windows 7 would be better for unbricking than windows 10.
finger crossed, right now flashing windows 7 live iso on USB.
so finally I am declaring my op3 as hardware failure as one of my other phone (yureka) easily identified as 9008 mode in my computer but my op3 is not. so all drivers are installed correctly but somehow my op3's usb hub is failed.
i guess time to move on..
thank you everyone for spending time to help me. it really is supportive and encouraging...
amit3880 said:
so finally I am declaring my op3 as hardware failure as one of my other phone (yureka) easily identified as 9008 mode in my computer but my op3 is not. so all drivers are installed correctly but somehow my op3's usb hub is failed.
i guess time to move on..
thank you everyone for spending time to help me. it really is supportive and encouraging...
Click to expand...
Click to collapse
So sorry about that .... Sad news
@Ammit3880
have you tried plugging in a usb in you phone trough the usb OTG cable? see if twrp recognizes the usb. and just put the needed files on there. maybe windows is just breing ignorant as always
BADA 187 said:
@Ammit3880
have you tried plugging in a usb in you phone trough the usb OTG cable? see if twrp recognizes the usb. and just put the needed files on there. maybe windows is just breing ignorant as always
Click to expand...
Click to collapse
ya.. tried all the ways including various OTG cabel/dongle,, various OS windows 7/8/8.1/10 all the way..
nothing working...
amit3880 said:
ya.. tried all the ways including various OTG cabel/dongle,, various OS windows 7/8/8.1/10 all the way..
nothing working...
Click to expand...
Click to collapse
damn sorry to hear man.
BADA 187 said:
damn sorry to hear man.
Click to expand...
Click to collapse
Got 6T yesterday.... .. Yay!!
Couldnt find other phone competative in the price range.
Time to change the xda signature...
Although I bought 6T now and am kind of happy with that, but I am still missing my oneplus 3 and want to experiment on getting it revived.
By any chance someone can help me answering my doubts.. I would be greatful..
1. Is it ok to replace oneplus3's motherboard with oneplus 3t motherboard ? If by any chance i get any resell op3 or op3t in dirt cheap price I want to know if its ok to use 3T's motherboard.
2. Is there any way I can turn on the wifi from within TWRP and so I can connect to phone via adb over wifi/tcpip ??
Thank you all in advance.