hi i've installed this rom
http://forum.xda-developers.com/showthread.php?t=2248654
and it works great but i cant increase my internal memory throug sd card i tried the script that came with the rom and it didnt work i also tried to create an ext3 & ext2 and then link it through link2sd but it also didnt work plz somebody help
abdoelking said:
hi i've installed this rom
http://forum.xda-developers.com/showthread.php?t=2248654
and it works great but i cant increase my internal memory throug sd card i tried the script that came with the rom and it didnt work i also tried to create an ext3 & ext2 and then link it through link2sd but it also didnt work plz somebody help
Click to expand...
Click to collapse
Use INT2EXT+ its easyer, faster, and reliable. Make a ext2 partition on your SD card using ether a Partition PC Program or a different method, i recommend using MiniTool Partition Wizard Home Edition and after you make the partition, re-install the ROM but dont start up the ROM now after you install the ROM install INT2EXT+ and now reboot your phone and your Internal Memory should be fine :good: You install the INT2EXT+ like you installed the ROM, just that first re-install the ROM then install the INT2EXT+
MiniTool Partition Wizard Home Edition Link: http://download.cnet.com/MiniTool-Partition-Wizard-Home-Edition/3000-2094_4-10962200.html
INT2EXT+: Attached
thanks
i did as you told me and i made it ext2 primary then i re-installed the rom and then i ran the script you gave me after installing gapps directly but it didnt work :'( :'( i tried to open link2sd but it said cannot mount script
abdoelking said:
i did as you told me and i made it ext2 primary then i re-installed the rom and then i ran the script you gave me after installing gapps directly but it didnt work :'( :'( i tried to open link2sd but it said cannot mount script
Click to expand...
Click to collapse
Did you wipe cache partition? wipe data/factory reset? Download this other attachment I gave you. Then go to recovery, Go to wipe data/factory reset, the wipe cache partition then go to install zip from sdcard --> choose zip from sdcard --> SuperWipeMarvelcEdition it'll say that you should reboot your phone, dont reboot and go and install your ROM and after you installed it, install the INT2EXT2+ that i gave you! But do all that first, then after you did that, then you can start your ROM.
I tried everything for many hours, but every time I did a partition using PC the phone wouldn't read the card and in the end I just formatted the card to factory settings using the PC and tried the CWR partitioning, worked like a charm with Link2SD.
Related
So i installed http://forum.xda-developers.com/showthread.php?t=1040121
i rooted my phone yesterday and today tried install that rom i installed it with
http://theunlockr.com/2010/09/21/how-to-load-a-custom-rom-on-the-htc-desire-2/ guide after install it said it was succesfully installed and i tried reboot it and now i cannot open it normally.
I can go recovery mode by pressing power + volume down
Can some1 help me what should i do?
In most circumstances it is because your sd card is not properly formatted or you have flashed the wrong data table. I think it is probably becuase of the sd card, make sure you format with a fat 32 and a ext4 partition. You can do this very easily with your recovery program or with gparted. If this fails I would flash a simple rooted rom to get the phone up and running and then read the forum. I assure you that is is not as complicated as it all seems
can some1 give me link for guide to format with a fat 32 and a ext4 partition
or simple rooted rom to i can get my phone back to work?
This is a rooted stock rom
http://forum.xda-developers.com/showthread.php?t=833310
Download this, put it on your sd card and flash it exactly as you flashed your previous rom, this will get the phone working again. I would then simply download and install Clockwork Mod recovery or 4ext recovery, both these will sort you sd card out. You simply want a fat32 with a 1gb ext 3 partition. Once this has been done you can then look at installing more complex roms.
If you get stuck lt me know and I will try and help, I was in the same place a year ago!!!!
Sorry, use this rooted rom as the other link requires sd ext
http://forum.xda-developers.com/showthread.php?t=741775
everything u need is in this thread, videos too (ext4 with Gparted, see Step 5)
http://forum.xda-developers.com/showthread.php?t=1016084
denatwork said:
everything u need is in this thread, videos too (ext4 with Gparted, see Step 5)
http://forum.xda-developers.com/showthread.php?t=1016084
Click to expand...
Click to collapse
how that will help when i cannot even open my phone exept recovery mode
tonil92 said:
how that will help when i cannot even open my phone exept recovery mode
Click to expand...
Click to collapse
.... because you're partitioning your SD-CARD.. and as far as I know that can be taken out of the phone no?
you can use gparted or minitool partition wizard (google the names). Most ROMs require a minimum of 512mb EXT Partition but 1GB is advisable. EXT3 is preferable, as the faster EXT4 is not compatible with all ROMS
u've asked for the link... i'gave u the link...
use a cardreader and boot not from ur smart, but from usb and do the same steps as in video described
Hey guys, I recently flashed benjamingwynn's cm 10. I really liked the rom but the rom takes up a lot of space. My internal memory is very low, so even if I use link2sd I was only able to install some apps. Then I tried data2sd from the market. I created a storage file but when I try to mount it, there's nothing happening. Is there any way to make data2sd working? Should I follow any other steps?
Thanks in advance!
rajatmendus said:
Hey guys, I recently flashed benjamingwynn's cm 10. I really liked the rom but the rom takes up a lot of space. My internal memory is very low, so even if I use link2sd I was only able to install some apps. Then I tried data2sd from the market. I created a storage file but when I try to mount it, there's nothing happening. Is there any way to make data2sd working? Should I follow any other steps?
Thanks in advance!
Click to expand...
Click to collapse
Data2sd from market? lol.
Data2sd is a script which is only flashed by installing from recovery or rom manager... Get cronmod int2ext+ script and flash it from recovery. It works pretty well.
I can only repeat sukhjit321, you have to flash it in recovery.
Download this: http://www.mediafire.com/?t1r06j60gybhn2t
Put it on your SD card, then install it from recovery just like a rom (delete cache partition and dalvik cache before).
Or try int2ext+ or something else, but you have to flash all of them in the recovery.
Pr3no said:
I can only repeat sukhjit321, you have to flash it in recovery.
Download this: http://www.mediafire.com/?t1r06j60gybhn2t
Put it on your SD card, then install it from recovery just like a rom (delete cache partition and dalvik cache before).
Or try int2ext+ or something else, but you have to flash all of them in the recovery.
Click to expand...
Click to collapse
Should i create a partition my sd card before flashing?
rajatmendus said:
Should i create a partition my sd card before flashing?
Click to expand...
Click to collapse
Yes, first make a FAT32 partition, and then an ext4 partition (the ext4 is going to be your internal memory, so make it as big as you want)
Pr3no said:
Yes, first make a FAT32 partition, and then an ext4 partition (the ext4 is going to be your internal memory, so make it as big as you want)
Click to expand...
Click to collapse
actually i thing 2048mb is the last stable bit
Data 2SD on CM10
Pr3no said:
Yes, first make a FAT32 partition, and then an ext4 partition (the ext4 is going to be your internal memory, so make it as big as you want)
Click to expand...
Click to collapse
Hi....i have a Wildfire S working on CM10. Im facing the problems of Low internal memory too...I have tried usinbg Link2Sd but barely helps...again doomed for low internal memory...if i flash data2sd try int2ext+ or something else, i wud have to flash all of them in the recovery by going in recovery mode and the install from SD card..BUT do i have to wipe everything or what i mean to say is do i have to flash the CM10 all over again by deleting everything OR just flashing DATA2SD / int2ext+ wud help.
Beacuse while using Link 2Sd i have already created partiion EXT4 for about 3GB on my 8 GB SD card..
Please suggest how i must do the process ....
Regards ,
Piyush
no...don't flash data2s or int2ext or othe sceipt simultanuslly....lit will cause crash...and u can use your link2sd partition as 2 nd partition....but if after flashing int2ext+ your internal memory dont change and 150 mb than you have to make patition again...sad..
Sent from my Wildfire S A510e using xda premium
Hi all!
I just created an sd-ext partition (ext4) on my sd-card and flashed the INT2EXT4+ script, but it doesn't seem to work.
What I did:
- Go into recovery
- Mount /system
- Installed the INT2EXT4+ script from my sd-card
- Formatted the sd-ext partition
- Rebooted my phone
I've done this a couple of times, but I still have the same amount of internal memory as before I flashed the script. (Before using this script, I tried using Link2SD but that had the same problem..)
And yes, I have init.d enabled and busybox installed and the script is located in the init.d folder.
Does anyone know how to fix this problem?
Btw, I'm using Maclaw's AOSP ICS Final 2.
You may refer to here.
http://forum.xda-developers.com/showthread.php?t=1590807
Try partitioning in CWM. I got S2E to work on CM7 in this way.
cegrade said:
You may refer to here.
http://forum.xda-developers.com/showthread.php?t=1590807
Try partitioning in CWM. I got S2E to work on CM7 in this way.
Click to expand...
Click to collapse
I tried the script/app without repartitioning my SD-card via CWM (I did it via Minitool Partition Wizard, so I didn't have to format my sd-card first) and it still doesn't work.. Should repartitioning via CWM fix the problem?
And btw, in the app description it says "Works on Cyanogenmod........". Since I'm not using Cyanogenmod, this app shouldn't even work, right?
Sorry if I'm being dumb now... :/
Sorry but I don't know if it works on CM rom. Others may know the answer.
I also tried Minitool Partition Wizard but the phone didn't relaize the partition. Then, I tried CWM and it worked.
cegrade said:
Sorry but I don't know if it works on CM rom. Others may know the answer.
I also tried Minitool Partition Wizard but the phone didn't relaize the partition. Then, I tried CWM and it worked.
Click to expand...
Click to collapse
Alright, I'll try that soon then and post the result here!
I don't want to format my sd-card.. :crying:
I have a little problem with my WFS. I partitioned the SD card to use Int2Ext4, but the ROM keeps saying that no SD card is present, even if it does use the EXT partition. I can mount the card in CWM, I can see it's content there.
I'm using the ROM from OWL Project (this thread), the last version of it.
I would post there, but I don't have the post count yet.
Any advice? I'm currently repartitioning my SD card and try again. I reflashed the ROM a couple of times, fixed permissions as well from CWM.
Did you format your partition on the SD card with EXT4? INT2EXT4 only supports the ext4 file system, not ext2 or ext3. I use the INT2EXTV2 on myl WFS with the OWL ROM for a few weeks and it works without problems so far.
allandanton said:
Did you format your partition on the SD card with EXT4? INT2EXT4 only supports the ext4 file system, not ext2 or ext3. I use the INT2EXTV2 on myl WFS with the OWL ROM for a few weeks and it works without problems so far.
Click to expand...
Click to collapse
Yes, I used Ext4. I tried flashing Int2Ext, Int2Ext+, Int2ExtV2+ and Int2Ext4+ from CWM, but I was always stuck on bootloop. The only way I made it work was by extracting the script file from Int2Ext4+ and placing it in /system/etc/init.d of the ROM zip. Flashed it, it worked, but then I got this problem )
I'm thinking that maybe the FAT32 partition was not formatted correctly. So I'm doing that now.
I repartitioned the SD card and now it worked correctly. Weird is, I did the same thing as before, so I'm not really sure why it wasn't working in the first time.
DrCriss said:
I have a little problem with my WFS. I partitioned the SD card to use Int2Ext4, but the ROM keeps saying that no SD card is present, even if it does use the EXT partition. I can mount the card in CWM, I can see it's content there.
I'm using the ROM from OWL Project (this thread), the last version of it.
I would post there, but I don't have the post count yet.
Any advice? I'm currently repartitioning my SD card and try again. I reflashed the ROM a couple of times, fixed permissions as well from CWM.
Click to expand...
Click to collapse
i format the sdcard, cache, dalvik, etc then flash the script (data2sd or int2ext or int2ext+ or watever) then goto advanced then select partition sd card, select 512 MB and 0 MB for linux swap space. DONE, hope solves it for you
I have too WFS with OWL project and i dont have any problem with this
Go to recovery menu and here create partition (befor it backup sd card)
Then go to mount and storage menu > mount usb storage >connect usb cable > give cronomod on sd
Then go to install zip from sd card and instal cronomod INT2EXT+
And have more memory
After instal cronomod dont stres android start is first longer but only first then normal speed
Thanks for the answers. I did say I fixed it already by repartitioning the card. Probably I didn't format it right.
DrCriss said:
Thanks for the answers. I did say I fixed it already by repartitioning the card. Probably I didn't format it right.
Click to expand...
Click to collapse
Click thanks if i was Helpfull
Hi all, I have a problem with the new CWM.
I trying to get functioned KK (http://forum.xda-developers.com/showthread.php?t=2735775).
1. I have succesfully installed KK rom
2. I have succesfully installed gapps for KK rom
3. Now I want to get more internal memory using the int2ext+ script..but there is the problem..firstly I tried to install int2ext+ but when I rebooted I find out that internal memory is same as without metioned script, so I tried to install int2extV2+..again, no more space in internal memory..so I decided that there is a problem with "no partion"..I tried to find out in mentioned recovery where to partition the card, but I cannot find it, how to solve this problem please? And is necessary to reinstall rom etc. because of "non-succesfully flashed two int2ext scripts"?
Thanks
KoFiler said:
Hi all, I have a problem with the new CWM.
I trying to get functioned KK (http://forum.xda-developers.com/showthread.php?t=2735775).
1. I have succesfully installed KK rom
2. I have succesfully installed gapps for KK rom
3. Now I want to get more internal memory using the int2ext+ script..but there is the problem..firstly I tried to install int2ext+ but when I rebooted I find out that internal memory is same as without metioned script, so I tried to install int2extV2+..again, no more space in internal memory..so I decided that there is a problem with "no partion"..I tried to find out in mentioned recovery where to partition the card, but I cannot find it, how to solve this problem please? And is necessary to reinstall rom etc. because of "non-succesfully flashed two int2ext scripts"?
Thanks
Click to expand...
Click to collapse
Mount on windows computer. Use Mini partition wizard. First partition Fat32 + second partion Ext4 (Both partitions must be "primary")
LS.xD said:
Mount on windows computer. Use Mini partition wizard. First partition Fat32 + second partion Ext4 (Both partitions must be "primary")
Click to expand...
Click to collapse
I will try it and post if I was succesed thx m8!
Edit: How can I please mount my mobile to computer? (I know, little bit noobish question, sorry for that)
KoFiler said:
I will try it and post if I was succesed thx m8!
Edit: How can I please mount my mobile to computer? (I know, little bit noobish question, sorry for that)
Click to expand...
Click to collapse
run CWM --> mount USB storage
All done! All ("I hope") works! Thanks again m8!
you can also use usb card reader or if you have notebook with card reader