Hey guys, I recently flashed benjamingwynn's cm 10. I really liked the rom but the rom takes up a lot of space. My internal memory is very low, so even if I use link2sd I was only able to install some apps. Then I tried data2sd from the market. I created a storage file but when I try to mount it, there's nothing happening. Is there any way to make data2sd working? Should I follow any other steps?
Thanks in advance!
rajatmendus said:
Hey guys, I recently flashed benjamingwynn's cm 10. I really liked the rom but the rom takes up a lot of space. My internal memory is very low, so even if I use link2sd I was only able to install some apps. Then I tried data2sd from the market. I created a storage file but when I try to mount it, there's nothing happening. Is there any way to make data2sd working? Should I follow any other steps?
Thanks in advance!
Click to expand...
Click to collapse
Data2sd from market? lol.
Data2sd is a script which is only flashed by installing from recovery or rom manager... Get cronmod int2ext+ script and flash it from recovery. It works pretty well.
I can only repeat sukhjit321, you have to flash it in recovery.
Download this: http://www.mediafire.com/?t1r06j60gybhn2t
Put it on your SD card, then install it from recovery just like a rom (delete cache partition and dalvik cache before).
Or try int2ext+ or something else, but you have to flash all of them in the recovery.
Pr3no said:
I can only repeat sukhjit321, you have to flash it in recovery.
Download this: http://www.mediafire.com/?t1r06j60gybhn2t
Put it on your SD card, then install it from recovery just like a rom (delete cache partition and dalvik cache before).
Or try int2ext+ or something else, but you have to flash all of them in the recovery.
Click to expand...
Click to collapse
Should i create a partition my sd card before flashing?
rajatmendus said:
Should i create a partition my sd card before flashing?
Click to expand...
Click to collapse
Yes, first make a FAT32 partition, and then an ext4 partition (the ext4 is going to be your internal memory, so make it as big as you want)
Pr3no said:
Yes, first make a FAT32 partition, and then an ext4 partition (the ext4 is going to be your internal memory, so make it as big as you want)
Click to expand...
Click to collapse
actually i thing 2048mb is the last stable bit
Data 2SD on CM10
Pr3no said:
Yes, first make a FAT32 partition, and then an ext4 partition (the ext4 is going to be your internal memory, so make it as big as you want)
Click to expand...
Click to collapse
Hi....i have a Wildfire S working on CM10. Im facing the problems of Low internal memory too...I have tried usinbg Link2Sd but barely helps...again doomed for low internal memory...if i flash data2sd try int2ext+ or something else, i wud have to flash all of them in the recovery by going in recovery mode and the install from SD card..BUT do i have to wipe everything or what i mean to say is do i have to flash the CM10 all over again by deleting everything OR just flashing DATA2SD / int2ext+ wud help.
Beacuse while using Link 2Sd i have already created partiion EXT4 for about 3GB on my 8 GB SD card..
Please suggest how i must do the process ....
Regards ,
Piyush
no...don't flash data2s or int2ext or othe sceipt simultanuslly....lit will cause crash...and u can use your link2sd partition as 2 nd partition....but if after flashing int2ext+ your internal memory dont change and 150 mb than you have to make patition again...sad..
Sent from my Wildfire S A510e using xda premium
Related
Hi,
I've created an ext4 partition on my SD with the intention of using it to store apps on
I used the gparted method described in http://forum.xda-developers.com/showthread.php?t=1016084
Now I've flashed a couple of ROM's (Oxygen, Redux and CM7) but have no idea how I can put apps on it
Additional question:
1) if you do a data, cache/dalvik wipe will the apps on the ext4 partition also be deleted or will they remain on it so you can reuse them in another ROM
2) I've rooted and s-offed my stock rom, can I use the partition I've created here as well? and if so, how?
thx
B
berre said:
Hi,
I've created an ext4 partition on my SD with the intention of using it to store apps on
I used the gparted method described in http://forum.xda-developers.com/showthread.php?t=1016084
Now I've flashed a couple of ROM's (Oxygen, Redux and CM7) but have no idea how I can put apps on it
Additional question:
1) if you do a data, cache/dalvik wipe will the apps on the ext4 partition also be deleted or will they remain on it so you can reuse them in another ROM
2) I've rooted and s-offed my stock rom, can I use the partition I've created here as well? and if so, how?
thx
B
Click to expand...
Click to collapse
on all 3 roms youve mentioned you tried, app2sd is automstically setup on rom install. so you are already using app2sd.
1. yes if you wipe dsata, it wipes your apps on ext 4 partition
2. and yes, your aready using your partition once your using a app2sd rom. specific roms allow you to push your dalvik cache to your partition but it is not reccommended as it can slow donw your phone.
LINKSLOVESANDROID said:
2. and yes, your aready using your partition once your using a app2sd rom. specific roms allow you to push your dalvik cache to your partition but it is not reccommended as it can slow donw your phone.
Click to expand...
Click to collapse
hi,
thx for the feedback, can I install app2sd on my stock froyo rom somehow?
I'm rooted and s-offed
Thx
B
extra test: I've installed Leedroid with app2sd
when I install an app from the market my internal memory decreases and I cannot move it to SD card
I've created a 500mb partition, should this be visible as "internal memory"?
cheers
B
Some apps still need some space from the NAND internal memory.
berre said:
I've created a 500mb partition, should this be visible as "internal memory"?
Click to expand...
Click to collapse
Nope. But if you download "Quick system info" from the market, you will see where it's written A2SD your external partition and its used space.
berre said:
extra test: I've installed Leedroid with app2sd
when I install an app from the market my internal memory decreases and I cannot move it to SD card
I've created a 500mb partition, should this be visible as "internal memory"?
cheers
B
Click to expand...
Click to collapse
If you are like me and want to install lots of apps app2sd is not good enough sorry I was on Leedroid superb ROM but I soon ran out of install memory because even if you move app2sd say you have 20mb app and move it to SD it will move like 16mb to SD and 4mb will still be on phone.
Best way is Data2SD I use startburst and have 2gb ext4 and my phone thinks it has 2gb internal memory
Make sure you backup and have a SD card class 4 and above some say class 2 fine I dont think so.
Hello,
after performing ful wipe, I installed MIUI V4 for HTC Desire following che "complete installation". After reboot, my desire is stuck, for about half a hour, on white htc screen with green led. Can someone help me?
Thanks.
Probably a no sd-ext partition issue.
via xda app
I don't understand, I followed the complete installation that appear when install the rom. There's something else to do???
Did u partition ur sdcard ? Coz u said u just did full wipe
Sent from my HTC Desire
I perform wipe data/factory reset and wipe cache partition. Next I install zip from sd card choosing MIUI-4-Desire-2.4.27-byMarange.zip. Then I choose the complete installation on menu and i install the rom.
Thanks for your time
ciccioing said:
I perform wipe data/factory reset and wipe cache partition. Next I install zip from sd card choosing MIUI-4-Desire-2.4.27-byMarange.zip. Then I choose the complete installation on menu and i install the rom.
Thanks for your time
Click to expand...
Click to collapse
U have to partition ur sdcard for rom to work. Go read the devs OP its says it there :banghead:
Sent from my HTC Desire
maybe I have to first create a ext3 partition in my sd card through gparted?!? My sd card is 4 Gb. How much space do I have to ext3 partition?
ciccioing said:
maybe I have to first create a ext3 partition in my sd card through gparted?!? My sd card is 4 Gb. How much space do I have to ext3 partition?
Click to expand...
Click to collapse
LOL yes u have to create an ext3/ext4 partition before u install the rom. What ever the dev recommends. What recovery do u have?
Sent from my HTC Desire
excuse my ignorance and thank you for your time. I use ClockworkMod 2.5.0.7 and I have a 4 Gb Sd card. What should I use to create the ext3 partition and how big???
ciccioing said:
excuse my ignorance and thank you for your time. I use ClockworkMod 2.5.0.7 and I have a 4 Gb Sd card. What should I use to create the ext3 partition and how big???
Click to expand...
Click to collapse
Personally i wouldnt use ClockWorkMod, its dodgy. but thats me. Go to miui rom v4 thread and read the developers install requirments. I hav'nt time to do it for you.(u should always READ before flashing a rom). I think in ClockWorkMod, u go down to advanced then partition sdcard, then it will give u sizes to choose from and pick what ever the dev requires
Sent from my HTC Desire
I'm using that ROM from Marange. My settings are 1GB EXT3, 128MB SWAP, other FAT32. This settings are working very fine for me...
During the installation choose custom installation then the LX-script (from Lennox, don't know the right name at the moment), then choose EXT3 and existing SWAP.
The first boot needs some time, but then all should work perfect!
Hey Guys
My friend has a Wildfire S.. We have S-offed it.. and put custom recovery.. CWM 5.0.2.8 .. Questions are
1) Is that good or latest recovery? or something better?? like TWRP ?
2) We have drilled down to three ROM's we can see..
CM10.1 4.2.1
CM10 4.1.2
CM7 2.3.7
We had tried CM10.1 but felt a bit sluggish.. slowish.. probably needed to do something more...
which rom is good out of the three or any other??
(we don't care about the usb tethering not working or camcorder recording etc).. should not be sluggish although.. won't say it will be lightning fast either.. I know the phone is quite old and limited..
3) We saw internal memory used 100MB and left only 20MB.. obviously we need to increase that.. we have a 12GB Card.. Now..
Do we need to format to ext4 ? full Card or partition? how much? what with the rest of the partition ?
Then which one to use for data to SD by default? Do we use INT2EXT4+ as mentioned in CM10.1 guide?
Is that compatible with all the ROM's or others above
We can currently format so just want to set it up correctly first time.. dont want to get it wrong..
any answers will be great!!
Cheers
Actually you posted in wrong section.. This should goes to Q/A section.... and yeah these questions have asked many times... Try search before posting...
Anyway... there is a touch type CWM recovery available(search in development section)... but 5.0.2.8 is used by most of the users, cuz no one need more than that....
Try cm9 roms... like MIUI, Paranoid Android ICS, Speed Droid... Those are great and quite stable and of course fast...
and for SD Card tweaks.. ext2 and ext4 are best... But for cm9, cm10 ext4 partition is preferred (idk why)...
make a second partition using minitool as ext4 and make it as primary (imp - not as logical)... then flash the int2ext+ (or) int2ext4+ script after you flashed the rom...
note that int2ext4+ is only for ext4 type partition and int2ext+ is for all ext2,3,4 type partitions... You can partition you sd card upto 2 GB ... cuz it is stable limit..
Yes int2ext scripts works with all roms....
Thanks for that..
So CM10 rom is not going to be quick?? which is good in Gingerbread then?
So I should format the 12GB card into 1) primary ext4 of 2GB and 2) leave the rest as FAT32??
then
1) Wipe everything
2) Install custom ROM
3) Install int2ext+
4) reboot
5) get into recovery again
6) install gapps
7) reboot??
missing anything?? also do i need custom kernel etc?? which one if so??
Flash the JellyKing rom by kantry. It is a smooth and stable cm 10 rom. There is eoghan's kernel in that rom so you don't have to flash a kernel.
Everything else like you listed it in the last post.
4ndaKava said:
Flash the JellyKing rom by kantry. It is a smooth and stable cm 10 rom. There is eoghan's kernel in that rom so you don't have to flash a kernel.
Everything else like you listed it in the last post.
Click to expand...
Click to collapse
Thanks will try that ROM
so is that generally best atm.. and any recommendation on custom recovery??
so
1) wipe
2) format 2GB ext4 in sd card as primary and rest as fat32?? or any other?? both primary??
3) install ROM
4) install int2ext+
5) reboot
6) install gapps
will this work for any ROM ?
khandu said:
Thanks will try that ROM
so is that generally best atm.. and any recommendation on custom recovery??
so
1) wipe
2) format 2GB ext4 in sd card as primary and rest as fat32?? or any other?? both primary??
3) install ROM
4) install int2ext+
5) reboot
6) install gapps
will this work for any ROM ?
Click to expand...
Click to collapse
yeah.let me clear about partition of sdcard:
for int2ext scripts
1) FAT32
2) ext3 or ext4 (as per custom rom,some rom wont work with ext4 but cm9 and cm10 will do)
for link2sd
1)FAT32
2)ext3 or ext4
3)linux swap partition(as per your phone RAM,512 MB is enough)
int2ext scripts dont require swap partition as per their description in main post.all partition should be primary,and 1 GB is enough but if you want 2 GB its ur choice but dont partition more than 2 GB,and yeah int2ext+ script uses 100 MB internal memory for 500 MB ext3/ext4 so if you partition 2 GB,your 400 MB internal space will be consumed..
you can directly partition you sdcard with help of minipartition tool on your computer.
and for you clearance linux swap partition is work as your backup rom.some cache will save on that partition so your phone speed wont slow.
Thanks..
Considering (in terms of preference)
1) JellyKing
2) Paranoid Android
3) Speed Droid
Any suggestions between the three?
Also I am planning to use in2ext+ with the following
1) 1st Partition - Primary 1.5GB ext4 (Read maximum should be 2GB so just being safe?)
2) 2nd Partition - Primary 14.5GB FAT32
So
1) Do the partition structure and size look good ?
2) Do all these roms support int2ext+ (I think so on reading)..
3) Do I create a swap partition as well? if so which order and how much? (reading suggests 500MB).. whats the advantage? any additional thing to be used for install? how to check if it worked as it should?
So after doing that.. I should
1) Wipe everything
2) Install ROM
(reboot or not after that??)
3) install int2ext+
4) Reboot and see if rom detects internal memory properly?
5) back into recovery and install gapps and reboot
Does all of this sound good??
Need to do this in an hr or 2 so quick reply will be appreciated
Cheers
khandu said:
Thanks..
Considering (in terms of preference)
1) JellyKing
2) Paranoid Android
3) Speed Droid
Any suggestions between the three?
Also I am planning to use in2ext+ with the following
1) 1st Partition - Primary 1.5GB ext4 (Read maximum should be 2GB so just being safe?)
2) 2nd Partition - Primary 14.5GB FAT32
So
1) Do the partition structure and size look good ?
2) Do all these roms support int2ext+ (I think so on reading)..
3) Do I create a swap partition as well? if so which order and how much? (reading suggests 500MB).. whats the advantage? any additional thing to be used for install? how to check if it worked as it should?
So after doing that.. I should
1) Wipe everything
2) Install ROM
(reboot or not after that??)
3) install int2ext+
4) Reboot and see if rom detects internal memory properly?
5) back into recovery and install gapps and reboot
Does all of this sound good??
Need to do this in an hr or 2 so quick reply will be appreciated
Cheers
Click to expand...
Click to collapse
sorry for late reply but my internet sucks.
first install speedroid.its fast,stable.i m using it s.:cyclops:
another reasons are jellyking is based on JB,which has many little bugs despite camcorder and all.and paranoid has dockbar and dpi size is very small so i dont like it.but its upto you what you want.
and use int2ext4+
its very fast and better than int2ext+ and yeah all cm9 and cm10 roms supports it.
partitions are good,you can use 1.5 GB ext4 but keep it 1 GB for caution purposes.might you dont need 1.5 GB belive me.
and yeah swap partition isn't need in int2ext4+ scripts but you have 16 GB memory card so keep swap partition 512 MB.
swap is work as backup RAM,its 512 MB because wildfire s has 512 MB ram.
steps:
1)wipe everything
2)install rom
3)install int2ext4+
4)go to "mount and storage"
5)format /sd-ext (its needed to format your sd-ext partition)
6)reboot
its take little long time to boot because we installed int2ext4+ script.then you can check internal memory.
then reboot in recovery again and install gapps.
and yeah if you wanted to install speeddroid,gapps already installed in it so no need to flash it.
need quick help.. have done everything and shows internal memory fine and have put speed droid
but i am installing gapps-jb-20120726-lite-rebased.zip and reboot but not a single gapps showing in phone.. it flashes fine as well..
partition
1) fat32 12GB
2) ext4 - 2000MB
3) swap - 500MB
using int2ext4+
khandu said:
need quick help.. have done everything and shows internal memory fine and have put speed droid
but i am installing gapps-jb-20120726-lite-rebased.zip and reboot but not a single gapps showing in phone.. it flashes fine as well..
partition
1) fat32 12GB
2) ext4 - 2000MB
3) swap - 500MB
using int2ext4+
Click to expand...
Click to collapse
you installed JB version..i have ICS version so not sure about gapps.
but might you installed wrong gapps.
when you installed gapps and reboot,
on your screen something like that "android is upgrading?"
---------- Post added at 02:49 PM ---------- Previous post was at 02:45 PM ----------
crossfire77 said:
you installed JB version..i have ICS version so not sure about gapps.
but might you installed wrong gapps.
when you installed gapps and reboot,
on your screen something like that "android is upgrading?"
Click to expand...
Click to collapse
and its not because of int2ext4+.
its fine.
just might you flashed wrong gapps.
search latest gapps on goo.im website.
and flash it.
good luck.
crossfire77 said:
when you installed gapps and reboot,
on your screen something like that "android is upgrading?"
---------- Post added at 02:49 PM ---------- Previous post was at 02:45 PM ----------
and its not because of int2ext4+.
its fine.
just might you flashed wrong gapps.
search latest gapps on goo.im website.
and flash it.
good luck.
Click to expand...
Click to collapse
No.. I know it should show that android is upgrading. it does not
i am reformatting to ext3 and going to use int2ext+ and try again!!!
Downloading gapps-jb-20121011-signed.zip
didnt work .. shows upgrading android.. but no apps show from gapps
khandu said:
No.. I know it should show that android is upgrading. it does not
i am reformatting to ext3 and going to use int2ext+ and try again!!!
Downloading gapps-jb-20121011-signed.zip
didnt work .. shows upgrading android.. but no apps show from gapps
Click to expand...
Click to collapse
oh..but keep in mind..nothing wrong in ext4 partition.its good for cm9 and cm10 though..anyways u can do one thing might it ll help..
1)wipe everything
2)install rom
3)install gapps
and then install int2ext.
crossfire77 said:
oh..but keep in mind..nothing wrong in ext4 partition.its good for cm9 and cm10 though..anyways u can do one thing might it ll help..
1)wipe everything
2)install rom
3)install gapps
and then install int2ext.
Click to expand...
Click to collapse
Yes I did that this time.. but left ext3 as it is..didn't convert it back to ext4.. hope that does not screw anything up..
worked this time.. used the speed rom ics build!!!
Doesn't matter what custom ROM I use, after the installation they all work until I restart the phone again (I restart the phone after clean ROM installation to see if it will boot, and it never does). After flashing any ROM I flash CronMod INT2Ext4, I have 512MB sd-ext (8GB SD Card). Can anyone help me with this? I would be thankfull.
srtjko said:
Doesn't matter what custom ROM I use, after the installation they all work until I restart the phone again (I restart the phone after clean ROM installation to see if it will boot, and it never does). After flashing any ROM I flash CronMod INT2Ext4, I have 512MB sd-ext (8GB SD Card). Can anyone help me with this? I would be thankfull.
Click to expand...
Click to collapse
Why would you flash INT2EXT4 on any ROM that you flash? By the way, do you delete the already existing a2sd scripts from the ROM before flashing INT2EXT4?
dvsk69 said:
Why would you flash INT2EXT4 on any ROM that you flash? By the way, do you delete the already existing a2sd scripts from the ROM before flashing INT2EXT4?
Click to expand...
Click to collapse
I flash for more internal storage, I know there are other ways, I just didn't know how to do them. And I don't delete any a2sd scrips, looks like I do most things wrong...
srtjko said:
I flash for more internal storage, I know there are other ways, I just didn't know how to do them. And I don't delete any a2sd scrips, looks like I do most things wrong...
Click to expand...
Click to collapse
try flashing the rom without flashing INT2EXT4. Most roms have built in a2sd scripts, which allow you to move apps to an sd ext partition.
Also, how did you create the partition, best done with 4ext recovery or gparted.
512MB is also quite small, might want to consider 1-1.5GB.
As above, just flash Rom without another a2sd script as most have them built in or activate with terminal commands, check each thread. Which Rom are you using?
eddiehk6 said:
Also, how did you create the partition, best done with 4ext recovery or gparted.
512MB is also quite small, might want to consider 1-1.5GB.
As above, just flash Rom without another a2sd script as most have them built in or activate with terminal commands, check each thread. Which Rom are you using?
Click to expand...
Click to collapse
I created the partition with CWM Recovery, I'll look for the guide and make one with 4ext.
I want to use 1Gig but that INT2EXT4 guide said that I need 100mb internal storage per every 512mb sd-ext. (and I had like 150mb free intenal)
ROM I want to use is AOKP CM10. Don't know how to activate a2sd, and I don't need to know it if 4ext recovery will do it...
srtjko said:
I created the partition with CWM Recovery, I'll look for the guide and make one with 4ext.
I want to use 1Gig but that INT2EXT4 guide said that I need 100mb internal storage per every 512mb sd-ext. (and I had like 150mb free intenal)
ROM I want to use is AOKP CM10. Don't know how to activate a2sd, and I don't need to know it if 4ext recovery will do it...
Click to expand...
Click to collapse
making the partition using cwm may have been your problem. Use this guide to remake the partition. Im assuming you want to use VJ's CM10.1 ROM. If this is the case, there is no need to use INT2EXT4. Instead use the preinstalled a2sd script.
After flashing the rom, you can activate a2sd by doing the following:
Open terminal emulator provided in the rom.
Type the following commands
su
a2sd install
Y
N
Y
chromium96 said:
making the partition using cwm may have been your problem. Use this guide to remake the partition. Im assuming you want to use VJ's CM10.1 ROM. If this is the case, there is no need to use INT2EXT4. Instead use the preinstalled a2sd script.
After flashing the rom, you can activate a2sd by doing the following:
Open terminal emulator provided in the rom.
Type the following commands
su
a2sd install
Y
N
Y
Click to expand...
Click to collapse
Yes, that's the guide I'm looking into now, but the ROM I want to use is VJs AOKP ROM:
http://forum.xda-developers.com/showthread.php?t=1863780
It doesn't have a2sd I think...
srtjko said:
Yes, that's the guide I'm looking into now, but the ROM I want to use is VJs AOKP ROM:
http://forum.xda-developers.com/showthread.php?t=1863780
It doesn't have a2sd I think...
Click to expand...
Click to collapse
It does. And you activate it the same way, as how i said above.
chromium96 said:
It does. And you activate it the same way, as how i said above.
Click to expand...
Click to collapse
Ok, thank you, now just one more thing. I have to remove the previous sd-ext partition and I can't do that on PC cause disk managment doesn't recognize it, it shows 6.87GB free, I think it should be about 7.3GB cause its 8GB SD. Can EXT4 recovery do that or should I find some program on PC?
---------------
I figured it out.
srtjko said:
Ok, thank you, now just one more thing. I have to remove the previous sd-ext partition and I can't do that on PC cause disk managment doesn't recognize it, it shows 6.87GB free, I think it should be about 7.3GB cause its 8GB SD. Can EXT4 recovery do that or should I find some program on PC?
Click to expand...
Click to collapse
In 4ext, there is an option to "Remove all partitions and start from scratch". Im guessing that deletes/wipes your fat32 partition as well, so back your files up.
If you want to delete it without the fat32 being formated too, you can use gparted. But thats a bit time consuming and a hassle.
when i install custom rom and start a2sd script from terminal emulator its work but when i reboot my phone all installed apps gone and ext partition not showing.
pls help..
Could u post more info?
Rom, hboot, recovery?
More importantly how did you partition your sdcard?
Should be done only with 4EXT recovery or gparted, not clockworkmod or minitool
slim vj rom & bravo alphaspl sense hboot 180-40-217 hboot
SaySayonara said:
Could u post more info?
Rom, hboot, recovery?
Click to expand...
Click to collapse
i use slim vj rom & bravo alphaspl sense hboot 180mb system 40mb cache & 217mb data & 4ext recovery
i created ext4 partition with 4ext recovery
eddiehk6 said:
More importantly how did you partition your sdcard?
Should
i created a 512mb ext4 partition via 4ext recovery
Click to expand...
Click to collapse
ranjodhricky said:
eddiehk6 said:
More importantly how did you partition your sdcard?
Should
i created a 512mb ext4 partition via 4ext recovery
Click to expand...
Click to collapse
hmm strange you created it using the right recovery.
The ext partition won't show up in your internal memory (i.e. it won't read 217MB + 512MB) but the sd-ext should store your apps and dalvik if you activated with A2SD with Y N Y
However, 512MB is very small, if you have enough apps it will fill up quite quickly. I'd recommend:
- backup sd card
- repartition with maximum 2GB ext4 partition, no swap (1.5GB is enough normally)
- full wipe and reinstall ROM, activate A2SD
- restore apps
Check your partition is filling up with an app like 'DiskUsage'
Click to expand...
Click to collapse
Try mount2sd and then verify it is enabled by checking overview in titanium backup.
Tapatalked from tablet.
Mounts2SD doesn't work with 4.2.2. I tried it.. or maybe I didn't do it right.
It only worked on GB for me..
but instead of the
a2sd install y>n>y
I did
a2sd xdata
Works like a charm
i use only 10 to 15 apps
actully bro i used only some apps that used only 350mb space some time ext partition show in app manager but after rebooting its gone.
now i use Link2sd app & its working properly
Sorry for bad english & thanks bro.