Develop Bugs

[Q] My HOX (HTC One X) wont install sense roms

Hello,
I have recently bought a second-hand HTC One X. When i bought the HOX it was rooted running the viper x 2.0.0 rom. I decided to change the rom to cyanogen 10 nightly. It was working fine but then i decided to install slim bean 3.0.0 and this was working fine too (this is what i have on my HOX right now).What i would like to do is install viper x 2.0.0 again or another sense-based rom. However i tried doing this and it does not boot. When i install it, it just loads the htc logo and then reboots again back into clockworkmod recovery?
I have tried various sense-based roms and none of then work? Also i know viper x 2.0.0 works because it was on there when i bought it.
Please can someone give me instuctions on how to do it.
Thanks in advance
P.S When i try to install the viper x or other sense-based rom i flash the boot.img using 'fastboot flash boot boot.img'
I have just fixed it i installed the latest version and worked the one i was installing must have been a ota update? anyway if u are stuck like me read this

after flashing the boot.img try "fastboot erase cache" it should work

erase cache always

Thanks for reply
Iacopo91 said:
after flashing the boot.img try "fastboot erase cache" it should work
Click to expand...
Click to collapse
Yes i have tried doing this many times and still isn't installing any sense roms?
Please could u give me a instruction to how to install a sense-based rom or viperx (step by step)
Thanks

He is what is says:
The5alodi said:
erase cache always
Click to expand...
Click to collapse
View attachment 1568226

Are you flashing the correct boot.img from the viperx rom.zip
Sent from my HTC One X

Viperx
TToivanen said:
Are you flashing the correct boot.img from the viperx rom.zip
Sent from my HTC One X
Click to expand...
Click to collapse
Yes, i know this because i use winrar to extract the boot.img from the viperx.zip
What do u think i should do to make it work?
I was thinking do i need to flash a kernel that works for the viperx to work or does the viperx.zip already have a kernel inside the file?
At the moment i have : 2.6.39.4-cyanogenmod because i have slimbean installed which is based on cm10

Full wipe, that's all I can think of.
Sent from my HTC One X

This is one of the ways i have done it:
TToivanen said:
Full wipe, that's all I can think of.
Sent from my HTC One X
Click to expand...
Click to collapse
1. go to bootloader and hit fastboot option
2. fastboot erase cache
3. fastboot flash boot boot.img (boot.img from the viperx.zip)
4. fastboot erase cache
5. disconect the phone from USB and go to the recovery
6. wipe data/factory reset
7. wipe cache
8. mounts & storage format system , data , cache
9. go to advanced and wipe dalvic cache
10. flash the rom
11. I rebooted the HOX in the aroma installer
12. and then it just boots on htc logo then back into recovery?!?
Also the weird thing is only sense-based roms don't work? And all the sense-based roms i have tried use aroma installer, maybe this could be to do with it?

First install rom then boot.img.
Sent from my HTC One X

did u full wipe inside aroma + what rom ver you are using maybe you are flashing an update or what hboot you are on ?

Ok will try now...
TToivanen said:
First install rom then boot.img.
Sent from my HTC One X
Click to expand...
Click to collapse
Ok i will try now and report back my results.
Thanks for possible anwser

i used to install ROM before flashing the boot.img and erasing cache... if i flash boot.img before sometimes i'm stuck in bootloop...
the boot.img has to be extracted from the rom itself... also try to flash other different roms

It is...
The5alodi said:
did u full wipe inside aroma + what rom ver you are using maybe you are flashing an update or what hboot you are on ?
Click to expand...
Click to collapse
I will try now a full wipe and it is not a update as far as i am aware of. the file is called: ViperX_v2.0.0
And my hboot is:
HBOOT-1.12.0000

I have done this...
Iacopo91 said:
i used to install ROM before flashing the boot.img and erasing cache... if i flash boot.img before sometimes i'm stuck in bootloop...
the boot.img has to be extracted from the rom itself... also try to flash other different roms
Click to expand...
Click to collapse
I have done this?!?

try the latest i think its 2.7 or check ARHD because your problem is weird

ok i willl
The5alodi said:
try the latest i think its 2.7 or check ARHD because your problem is weird
Click to expand...
Click to collapse
Ok i will have to download it and its 647mb which will take me 1hr to 1hr and 30mins so will report back when i try to install it.

ok i am going to watch real Madrid match so P.M me i will help dont worry

ok thanks very much!!!!!!!!
The5alodi said:
ok i am going to watch real Madrid match so P.M me i will help dont worry
Click to expand...
Click to collapse
Ok i will do

Its working now!!!
Everyone thanks for helping i think i was instally a update not the actual rom !?! silly me !!!
Thanks again!

[Q] please help me error after upgrading hbot

my one x is HTC_622 hboot 1.36
now, my one x cant get into the android
before the error, my one x is android 4.0 custom rom
and i want to upgrade to 4.1
and i tried this one http://forum.xda-developers.com/showthread.php?t=1660807
and i tried http://forum.xda-developers.com/showthread.php?t=2009525
unfortunately, i forgot the ruu will clear my sdcard. and i dont have the zip file in the sd card
i cant trun on my phone into android, so i cant put the zip to sd card
so i run the ruu of radio 2.12 again in order to get back the stock rom
but it failed.
how to slove this problem.

kelvin1hui said:
my one x is HTC_622 hboot 1.36
now, my one x cant get into the android
before the error, my one x is android 4.0 custom rom
and i want to upgrade to 4.1
and i tried this one http://forum.xda-developers.com/showthread.php?t=1660807
and i tried http://forum.xda-developers.com/showthread.php?t=2009525
unfortunately, i forgot the ruu will clear my sdcard. and i dont have the zip file in the sd card
i cant trun on my phone into android, so i cant put the zip to sd card
so i run the ruu of radio 2.12 again in order to get back the stock rom
but it failed.
how to slove this problem.
Click to expand...
Click to collapse
1.Flash custom recovery http://download.clockworkmod.com/rec...-endeavoru.img ( Fastboot flash recovery nameofrecoveryfile.img) make sure youre in fastboot folder.
2.Go to Fastboot mode holding power and volume button simultaneously.
3. Select recovery mode.
4. Go to mount and storage < Mount usb storage.
Copy the ROM of your choice.
5. Flash the boot.img - fastboot flash boot boot.img
Note: Use any custom JB rom of your choice
Hope it helps.

thx
but another problem happened
after i installed viper 3.2, i cant get any phone signal, that means i cant connect to internet wif hspa or cant phone
do you know how to slove this? i cant use viper3.2 in hong kong?

kelvin1hui said:
thx
but another problem happened
after i installed viper 3.2, i cant get any phone signal, that means i cant connect to internet wif hspa or cant phone
do you know how to slove this? i cant use viper3.2 in hong kong?
Click to expand...
Click to collapse
have you flashed the rom's boot.img?

matt95 said:
have you flashed the rom's boot.img?
Click to expand...
Click to collapse
yes, i confirmed twice

kelvin1hui said:
yes, i confirmed twice
Click to expand...
Click to collapse
Try flashing the boot.img only, make sure to clean cache and dalvik cache.
Under mobile network try to do a manual search.

ashishchandra said:
Try flashing the boot.img only, make sure to clean cache and dalvik cache.
Under mobile network try to do a manual search.
Click to expand...
Click to collapse
fastboot erase cache?

kelvin1hui said:
fastboot erase cache?
Click to expand...
Click to collapse
That's always good to do, but Matt means the cache and dalvik cache that you can wipe in the recovery

kelvin1hui said:
fastboot erase cache?
Click to expand...
Click to collapse
yes from fastboot as well as from recovery !!

Hmmm i am starting to lose the confidence in the hboot firmware update. I am seeing more and more reports of this problem. My opinion :
its always the best thing to update officially with a nandroid backup !
This way you avoid radio/ril problems ..... but its to late for that now, the solution ..... I don't have it
Try to flash from scratch again, wipe ALL from recovery even format the sdcard and copy only the rom.zip back on it.
Flash the boot.img and install this script right before you install the rom !
http://db.tt/eLoVUcRc
(Install it the same way as a rom - install zip from sdcard and continue to install it)
Then the rom, and also choose in the aroma full wipe and also very important (this might be the problem!!!) The question about the custom kernel ....choose NO !

You could try getRIL from play store.
Sent from my One X

:laugh::laugh::laugh:
every problem solved now ,after i follow all steps that you guys recommend
now im using viper 3.2 now
i hope i dont need to upgrade hboot again when 4.2 or 5.0 released

Nice !

kelvin1hui said:
:laugh::laugh::laugh:
every problem solved now ,after i follow all steps that you guys recommend
now im using viper 3.2 now
i hope i dont need to upgrade hboot again when 4.2 or 5.0 released
Click to expand...
Click to collapse
Good Luck mate, you will learn a lot from all . :good:

HOX bootloop..!

Hi, I successfully Rooted my phone, made a backup with CWM and I installed TWRP, made a backup, and then flashed CleanROM, but somehow, the same ROM appeared, so I checked the forums and I flashed "fastboot boot boot.img", and then the bootloop started,
I tried many thing, read the Q&A, tried to restore my backups but nothing, I have CleanROM 6 R2.zip on my phone, have CWM and TWRP, I can switch between these 2 recovery apps, tried to cleach cache, wipe etc.. but didnt work,
Please someone help to solve this problem with the CleanROM or the stock ROM
Thanks, and sorry for my bad english.

Clean Rom :
Make a full wipe in the recovery ! Data,caches,system,android secure......all except the sdcard !
Install the cleanrom.zip and flash the boot.img
Fastboot flash boot boot.img
Fastboot erase cache
The cleanrom....isn't that a rom for the at&t hox (HTC one XL) what does your bootloader say ?
EVITA OR ENDEAVORU ???

Mr Hofs said:
Clean Rom :
Make a full wipe in the recovery ! Data,caches,system,android secure......all except the sdcard !
Install the cleanrom.zip and flash the boot.img
Fastboot flash boot boot.img
Fastboot erase cache
The cleanrom....isn't that a rom for the at&t hox (HTC one XL) what does your bootloader say ?
EVITA OR ENDEAVORU ???
Click to expand...
Click to collapse
ENDEAVORU R_Radio_5.1204.162.29
I already tried this:
Mr Hofs said:
Make a full wipe in the recovery ! Data,caches,system,android secure......all except the sdcard !
Install the cleanrom.zip and flash the boot.img
Fastboot flash boot boot.img
Fastboot erase cache
Click to expand...
Click to collapse
But didnt work

If the clean rom is downloaded from the at&t forum DITCH IT NOW !!! you might end up bricked.
Do you have a link to the rom ?
Download a rom from here, from this section ! Never ....EVER go to the at&t, rogers, HTC one XL forum with a ENDEAVOURU international tegra 3 HTC one X. These are 2 completely different phones !.

Mr Hofs said:
If the clean rom is downloaded from the at&t forum DITCH IT NOW !!! you might end up bricked.
Do you have a link to the rom ?
Download a rom from here, from this section ! Never ....EVER go to the at&t, rogers, HTC one XL forum with a ENDEAVOURU international tegra 3 HTC one X. These are 2 completely different phones !.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1655011
This was the rom I flashed, so you think, I bricked it, and can't dont anything? :crying:

No its not bricked as long as you can enter the bootloader and recovery. You just need to flash a new rom from THIS forum !

Mr Hofs said:
No its not bricked as long as you can enter the bootloader and recovery. You just need to flash a new rom from THIS forum !
Click to expand...
Click to collapse
Please can you link me a good ROM and tell me how to upload the rom for my phone in bootloader mode, or just tell me how to flash a new ROM? because I cant reach phone storage from my PC, I would appreciate it.

I dont know what you like, browse and check for one yourself
I can tell you how to install it.
1: enter the bootloader and flash the new boot.img
2: enter the recovery and mount the sdcard as a usb mass storage device (cwm has it under mounts and storage)
3: copy the rom.zip to the sdcard and unmount
4: perform a full wipe
5: install the new rom.zip
6: reboot

Mr Hofs said:
I dont know what you like, browse and check for one yourself
I can tell you how to install it.
1: enter the bootloader and flash the new boot.img
2: enter the recovery and mount the sdcard as a usb mass storage device (cwm has it under mounts and storage)
3: copy the rom.zip to the sdcard and unmount
4: perform a full wipe
5: install the new rom.zip
6: reboot
Click to expand...
Click to collapse
Thank you, I found one, but I would like to ask you, http://forum.xda-developers.com/showthread.php?t=1745176
This ROM will be okay?
I will inform you after the process, I hope i can fix it.

Very fine rom indeed, but what is your hboot ? If its a JB one i would go for the 3.4 JB version of the viper X
If you have a hboot that is higher then 1.28 install this one
http://forum.xda-developers.com/showthread.php?t=2087443
Download the full 3.4.0 rom ! NOT the 3.4.3......that one does not boot up.

*** UNLOCKED ***
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.36.0000
CPLD-None
MICROP-None
Radio-5.1204.162.29
eMMC-bootmode-disabled
CPU-bootmode: disabled
MODEM PATH : OFF
Nov 16 2012, 18:32:39
I hope this will help, and if you can give me a link for the proper ROM please , thanks.

I just did 1 post before yours......install the JB one, your hboot is fine :thumbup:

Im in CMW now, but here are these options : mount /sdcard -mount USB storage, I tried both but it says E: unable to open ums(no such file or directory), what souhld I do ? ( and i dont see the phone in my computer)

Update the cwm recovery to 5.8.4.0.....you are using an older version !
The new one will fix that problem and you will be able to mount the sdcard
Link
http://db.tt/Krlm4dPs

Worked, thack for your help, and for your fast answers :victory::victory::victory::victory:

Nice ! Glad i could help
CASE CLOSED !

[Q] Don't know what RUU to use (softbricked)

Hi everybody,
I'm in deep poop right here.. I messed around with the roms a little bit and now I'm stuck with an ampty sdcard and clockworkmod.
I've tried pushing a rom through adb, but somehow it won't work on my phone/pc. So now I'm planning to go back to stock using RUU.
I've been trying several RUU's, but with no avail. I really don't know what to use right now so I'm asking for your help guys.
Here's some information I got:
CID: HTC__E11 (Dutch)
Main number: 4.18.401.2
Radio-5.1204.167.31
HBOOT: 1.72.0000
I also found this thread: http://forum.xda-developers.com/showthread.php?t=2663718
But I wouldn't have the slightest idea on how to go back to stock 4.1.1. like they suggest here.
Please help me out guys you're my only hope!:crying::crying::crying::crying:

Why don't u this TWRP http://www.androidfilehost.com/?fid=23329332407579463
UMS works, but be patient and wait for a minute or two until it mounts.
Also, this recovery can flash JB and KK roms.

aleksandar.1 said:
Why don't u this TWRP
UMS works, but be patient and wait for a minute or two until it mounts.
Also, this recovery can flash JB and KK roms.
Click to expand...
Click to collapse
Yeah, done that. But unfortunately it's a common One x problem that the touchscreen doesn't work and the version without touch doesn't have the ADB/USBmount capabilities.
I've also been troubleshooting for a few hours on why the ADB doesn't work on my device as well, but again, to no avail.
Installing via RUU is pretty much my only option here I think :/

ogradish said:
Yeah, done that. But unfortunately it's a common One x problem that the touchscreen doesn't work and the version without touch doesn't have the ADB/USBmount capabilities.
I've also been troubleshooting for a few hours on why the ADB doesn't work on my device as well, but again, to no avail.
Installing via RUU is pretty much my only option here I think :/
Click to expand...
Click to collapse
Did u even try the twrp from the link ??? I also have hboot1.72 and touchscreen works.
And you have no ruu for sense 5.

aleksandar.1 said:
Did u even try the twrp from the link ??? I also have hboot1.72 and touchscreen works.
And you have no ruu for sense 5.
Click to expand...
Click to collapse
Sorry man, you're right, I should've tried it.
I just flashed it, but like the last time, the touch screen still doesn't work.
This might sound retarded, but if there's no RUU for sense 5, can't I just use one for sense 4?

Flash this recovery :
https://www.dropbox.com/s/qp21ubo10xetcvn/Philz recovery 5.15.9.img
And then install this rom
http://forum.xda-developers.com/showthread.php?t=1546970

Mr Hofs said:
Flash this recovery :
https://www.dropbox.com/s/qp21ubo10xetcvn/Philz recovery 5.15.9.img
And then install this rom
http://forum.xda-developers.com/showthread.php?t=1546970
Click to expand...
Click to collapse
Will try!
Thanks
I'll give an update once I've done that

Mr Hofs said:
Flash this recovery :
https://www.dropbox.com/s/qp21ubo10xetcvn/Philz recovery 5.15.9.img
And then install this rom
http://forum.xda-developers.com/showthread.php?t=1546970
Click to expand...
Click to collapse
I just flashed the recovery. I try to mount USB storage, but nothing shows up on my computer, the same goes for when I use the comman "adb devices"

Mr Hofs said:
Flash this recovery :
https://www.dropbox.com/s/qp21ubo10xetcvn/Philz recovery 5.15.9.img
And then install this rom
http://forum.xda-developers.com/showthread.php?t=1546970
Click to expand...
Click to collapse
Nevermind, This did work for me!!!!
I just had to give it a little time though
ADB doesn't work but that's got to do with windows 8.1
It also won't recognize the system storage, but it's allright as long as I can put a rom on it now.
Thanks for all the support everybody!
In the Philz recovery I made sure system and sdcard said "unmount" and went into "mount usb"
If you want to get system storage to work or for some reason the mass storage isn't working you should check this out : http://forum.xda-developers.com/showthread.php?t=2232799
I flashed back to clockworkmod to flash a Nandroid backup I found on the internet which can be found here: http://forum.xda-developers.com/showthread.php?t=1975140 (make sure you unpack it when it's in your clockworkmod/backup folder

Yeah i know the collection thread ...... also for the M8 now

[Q] Verizon HTC one can`t use storage

Hey there,
My HTC One m7 vzw HBOOT 1.56. cannot use its storage after flashing teaMSeven kernel.
I use cyanogenmod 11 last stable release and TWRP 2.8.4.0.
My device is rooted, s-on and it is "TAMPERED UNLOCKED"
When the device is in the recovery, the problem does not appear.
I tried to flash a different ROM and it says "error executing updater binary in zip sdcard...
or " unable to mount /system". I can flash CM 11 and boot into it but i cant save or download anything on the Phone.
I also tried to flash a different kernel (tinykernel-m7-cm11) -nothing changed
pls help me !
ps. yes I know my english is bad, its because i'm German

maxizocker said:
Hey there,
My HTC One m7 vzw HBOOT 1.56. cannot use its storage after flashing teaMSeven kernel.
I use cyanogenmod 11 last stable release and TWRP 2.8.4.0.
My device is rooted, s-on and it is "TAMPERED UNLOCKED"
When the device is in the recovery, the problem does not appear.
I tried to flash a different ROM and it says "error executing updater binary in zip sdcard...
or " unable to mount /system". I can flash CM 11 and boot into it but i cant save or download anything on the Phone.
I also tried to flash a different kernel (tinykernel-m7-cm11) -nothing changed
pls help me !
ps. yes I know my english is bad, its because i'm German
Click to expand...
Click to collapse
Hi, You'll need to run this RUU here. It repairs mount/partition/system problems:
http://forum.xda-developers.com/verizon-htc-one/help/exe-ruu-vzw-m7-4-4-3-s-users-t2919442
After running, do a factory reset, then it is 100% stock and everything will be working.