I was on Paranoid Android. Wanted to switch back to a TW so I went to Goodness Noteworthy and flashed the mc2 modem. had problems with updating my prl and getting service, so I decided it was time for me to revert back to stock. odin will not flash stock. please help!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> COMBINATION_L900VPLJ1_L900VPALJ1_CL265523_HWID04_HW-Rev0406_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> param.bin
<ID:0/005> recovery.img
<ID:0/005> sboot.bin
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
Try once more.
Odin did that to me where everything in the log was successful, but failed in the end. I tried again and it worked. I don't know why.
Lord Sekhmet said:
Try once more.
Odin did that to me where everything in the log was successful, but failed in the end. I tried again and it worked. I don't know why.
Click to expand...
Click to collapse
have tried a bunch of times now. i have tried a handful of different .tar files too. I cant get any of them to work =[
I am new all this and am learning to tinker, brick and fix too.
Here is a trick I came up with. Get a Micro SD card. Download a ROM and anything else you need to it. Put in phone. Go into recovery. Flash away.
Lord Sekhmet said:
I am new all this and am learning to tinker, brick and fix too.
Here is a trick I came up with. Get a Micro SD card. Download a ROM and anything else you need to it. Put in phone. Go into recovery. Flash away.
Click to expand...
Click to collapse
I cant even get into recovery =[
Your problem is probably beyond me in my learning curve.
But, just to make sure you know this trick. Pull the battery. Place fingers on Power, Home and Volume Up buttons. Hold those buttons tightly while inserting the battery. Keep holding until the recovery screen appears.
Good luck!
If I find or figure out another method I will post again.
You can not downgrade because of your sboot try the mc2 odin file.
Sent from my SPH-L900 using xda premium
shabgard said:
You can not downgrade because of your sboot try the mc2 odin file.
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
I will give that a try. its just in the modems section right?
djkozdefantastico said:
I will give that a try. its just in the modems section right?
Click to expand...
Click to collapse
Download of these 2 files from this site, you need to reflash the whole system dump:
http://www.rwilco12.com/downloads.p...ote II (SPH-L900)/Stock ROMs/MC2/Full Restore
Related
please help me someone i had the stock el29 system and tried to root it with this
http://forum.xda-developers.com/showthread.php?t=1433101&highlight=el29+root
but it froze at factoryfs.im so im waited 25 mins then tried doing the odin manually by putting the file in myself then it went all the way to rqt_close then nothing it stuck.
i need to get rooted cause i want this rom but i will take anything now rooted non rooted i just want my phone fixed.
http://forum.xda-developers.com/showthread.php?t=1512419&highlight=fd24
it (auto root) made my phone say "firmware upgrade encountered and issue. please select recovery mode in kies & try again.
my first device. i couldnt connect to odin and computer wouldnt recognize device so i took it to sprint and they gave me a replacement.
i figured it was a bad download or something so i downloaded it again today and it messed this phone up to only this phone connects to pc and is recognized but when i try to upload the rom on the regular odin and not the one click it stuck at rqt_close and im confused as to what to do now. i dont even have to be rooted anymore i just want a rom on this phone i was out of a phone for 5 days for that Rom and its messed me over again.
1st time it stuck at factoryfs.img then i got replacement and it stuck at modem and then i took out battery after it was froze for like 25 mins. please help me!!!
Have you tried a different USB cable and/or computer?
yes ive tried a different cable but i only have this one computer. its recognizable through odin and my computer im a little dissapointed though. ive been flashing roms for 2 yrs almost and this has never happened to me
TamiaSky said:
yes ive tried a different cable but i only have this one computer. its recognizable through odin and my computer im a little dissapointed though. ive been flashing roms for 2 yrs almost and this has never happened to me
Click to expand...
Click to collapse
Can you get into recovery mode?
no i cant get into recovery just that dreadful notice but i can get into download mode, so thats a good thing im guessing.
i get all the way to the end to rqt_close then it says my device has been removed like odin is kicking me out or something. i dont unplug my phone or anything but it gets all the way to the end then says removed then failed
You get that message whenever ODIN doesn't complete a download. It doesn't mean much, other than the previous download didn't complete.
Is ODIN flashing anything or does it just stop right away?
If you are using regular ODIN, can you double-check you are using the PDA slot and not the Phone slot?
sfhub knows WAY more about Odin then I do but did you also try to Odin a different stock build to see what happens?
sfhub said:
You get that message whenever ODIN doesn't complete a download. It doesn't mean much, other than the previous download didn't complete.
Is ODIN flashing anything or does it just stop right away?
If you are using regular ODIN, can you double-check you are using the PDA slot and not the Phone slot?
Click to expand...
Click to collapse
ive tried the auto packages and doing it manually and when i did it manually i made sure tat it was the pda slot and i unchecked the re-partition when it popped up as well then after looking around on the internet still i used one of the 7-zip packages and used the pit file with it and checked re-partition and still nothing. odin gets all the way to the end right after modem and then sticks on rqt_close then says removed now it just did this
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.bin
<ID:0/006> hidden.img
<ID:0/006> boot.bin
<ID:0/006> Sbl.bin
<ID:0/006> param.lfs
<ID:0/006> cache.img
<ID:0/006> zImage
<ID:0/006> factoryfs.img
<ID:0/006>
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
i really hope you guys can help me. im so serious if i get this fixed ill never try to root this phone again. i dont wanna have to get another replacement phone.
MeWarning said:
sfhub knows WAY more about Odin then I do but did you also try to Odin a different stock build to see what happens?
Click to expand...
Click to collapse
no ive only been trying the el29 one the rooted one, then i tried the el29 that was just stock and not rooted.
Is this the NoData or Full version you are flashing?
Try the NoData if you are using the Full.
I'm curious, you were on ICS before. Did you happen to do a wipe/factory restore or nandroid restore using ICS kernel and custom recovery?
TamiaSky said:
no ive only been trying the el29 one the rooted one, then i tried the el29 that was just stock and not rooted.
Click to expand...
Click to collapse
Well first if you look in the reference section B in the one you've been trying to Odin(http://forum.xda-developers.com/showthread.php?t=1433101&highlight=el29+root) there's separate tar files for the modem, kernel, and rom. Why don't you try doing each one one at a time to see if anything will succeed.
And if that doesn't work try to Odin one of the leaked stock ICS builds sfhub has also.
This is what happens when I do it manually without the auto package.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SPH-D710.EL29_CL852097_ROOTED_PDA.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> hidden.img
<ID:0/006> boot.bin
<ID:0/006> Sbl.bin
<ID:0/006> param.lfs
<ID:0/006> cache.img
<ID:0/006> zImage
<ID:0/006> factoryfs.img
<ID:0/006> data.img
<ID:0/006> modem.bin
<ID:0/006> RQT_CLOSE !!
then it freezes
sfhub said:
Is this the NoData or Full version you are flashing?
Try the NoData if you are using the Full.
I'm curious, you were on ICS before. Did you happen to do a wipe/factory restore or nandroid restore using ICS kernel and custom recovery?
Click to expand...
Click to collapse
its the full, and ive never been on ics
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SPH-D710.EL29_CL852097_ROOTED_PDA.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> hidden.img
<ID:0/006> boot.bin
<ID:0/006> Sbl.bin
<ID:0/006> param.lfs
<ID:0/006> cache.img
<ID:0/006> zImage
<ID:0/006> factoryfs.img
<ID:0/006> data.img
<ID:0/006> modem.bin
<ID:0/006> RQT_CLOSE !!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
now i will try the no data and see what happens.
thanks guys for helping me with this. the no data is downloading right now and i looked on my computer i tried to flash the ek02 sorry, i forgot that one.
TamiaSky said:
thanks guys for helping me with this. the no data is downloading right now and i looked on my computer i tried to flash the ek02 sorry, i forgot that one.
Click to expand...
Click to collapse
No problem, just let us know how it goes.
Don't worry about flashing the NoData version, you don't have the issue I was thinking you might.
Why don't you just flash the modem by itself and see if that works. As the previous poster mentioned, it is in the 2nd post reference section.
If it doesn't work, then just flash the kernel by itself. It should work, and then your phone shouldn't complain about the last flash failing and theoretically should boot. Basically you have completed flashing everything but the modem.
If it still doesn't boot, then ODIN flash CWM only and then flash the modem from recovery. This will increment your ODIN flash count, but it is better than a phone not working.
sfhub said:
Don't worry about flashing the NoData version, you don't have the issue I was thinking you might.
Why don't you just flash the modem by itself and see if that works. As the previous poster mentioned, it is in the 2nd post reference section.
If it doesn't work, then just flash the kernel by itself. It should work, and then your phone shouldn't complain about the last flash failing and theoretically should boot. Basically you have completed flashing everything but the modem.
If it still doesn't boot, then ODIN flash CWM only and then flash the modem from recovery.
Click to expand...
Click to collapse
so once i flash the modem then how will i know if it worked or not am i jus supposed to try turning my phone on? or do i reflash the auto package after flashing the modem?
TamiaSky said:
so once i flash the modem then how will i know if it worked or not am i jus supposed to try turning my phone on? or do i reflash the auto package after flashing the modem?
Click to expand...
Click to collapse
Just flash the modem. The reboot option should be checked. When it is done flashing the modem, it should reboot. If it hangs like before, boot back into ODIN DL mode and flash just the kernel.
The individual components are 7zip self-extractors, so you double-click on them to get the .tar.md5 file. All the .tar.md5 files can go into the PDA slot (including the modem). No need to use the Phone slot.
sfhub said:
Just flash the modem. The reboot option should be checked. When it is done flashing the modem, it should reboot. If it hangs like before, boot back into ODIN DL mode and flash just the kernel.
The individual components are 7zip self-extractors, so you double-click on them to get the .tar.md5 file. All the .tar.md5 files can go into the PDA slot (including the modem). No need to use the Phone slot.
Click to expand...
Click to collapse
Sfhub,I noticed that a while ago in your directions about having the modem in the PDA slot. Why is it not done in the Phone spot anymore? Just curious is all.
MeWarning said:
Sfhub,I noticed that a while ago in your directions about having the modem in the PDA slot. Why is it not done in the Phone spot anymore? Just curious is all.
Click to expand...
Click to collapse
When you package a modem.bin inside of a .tar.md5 it can flash in both the PDA and Phone slot. It is simpler for the instructions to ask people to always use the PDA slot.
If you flash a modem.bin file itself, then it must go in the Phone slot. If you flash the wrong file in the Phone slot, your phone won't boot. That is why I package things so people always use the PDA slot.
for some reason while trying to return to stock, odin keeps failing while trying to flash sboot.bin. any info on a work around would be helpful.
yavimaya401 said:
for some reason while trying to return to stock, odin keeps failing while trying to flash sboot.bin. any info on a work around would be helpful.
Click to expand...
Click to collapse
Write a radio from before ma7 so like a ljc or whatever radio and then try again ....
Sent from my SPH-L900 using Xparent BlueTapatalk 2
yavimaya401 said:
for some reason while trying to return to stock, odin keeps failing while trying to flash sboot.bin. any info on a work around would be helpful.
Click to expand...
Click to collapse
I'm having the exact same problem, I tried everything I could i'm still failing at the sboot.bin
Is this what you're screen looks like?
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SPH-L900_L900VPALJ1_L900VPALJ1_L900SPTALJ1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> boot.img
<ID:0/011> NAND Write Start!!
<ID:0/011> cache.img
<ID:0/011> hidden.img
<ID:0/011> modem.bin
<ID:0/011> param.bin
<ID:0/011> recovery.img
<ID:0/011> sboot.bin
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<ID:0/011> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/011> Removed!!
Download an official release from samfirmware.con
Sent from my SPH-L900 using xda app-developers app
Sboot.bin won't downgrade the normal way from ma7 back to lk8/ljc etc. Garwynn has a work around for it somewhere in the dev section. I believe you need to use billards all in one revert to ljc with flash counter reset to downgrade the bootloader. This is why I didn't flash the bootloader with ma7 I just flashed the rom and modem. That way I wouldn't need to hassle around with downgrading it if I wanted to one click back to ljc instead of ma7
☆SoA: Son's of Android™☆
I like to break stuff!
Thanks for help and suggestions.
All systems are go on my phone now, I downloaded the stock file from Samsungupdates.com, then installed it thru Odin and it worked like a charm.
I did have to install it twice and it passed both time, It took to long the first time to reboot, so I deleted and did a factory reset then reinstalled the TAR.
I'm good to go
I reinstalled the drivers, reinstalled odin, re-downloaded the LJ1 MD5, used different cables, but everytime I getting this in the Odin screen
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SPH-L900_L900VPALJ1_L900VPALJ1_L900SPTALJ1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> boot.img
<ID:0/011> NAND Write Start!!
<ID:0/011> cache.img
<ID:0/011> hidden.img
<ID:0/011> modem.bin
<ID:0/011> param.bin
<ID:0/011> recovery.img
<ID:0/011> sboot.bin
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<ID:0/011> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/011> Removed!!
Anyone have any other method I can try to get back to complete stock. Any ideas would be appreciated.
Go to Android development and look for billiard412's thread he had a back to stock setup that works very well.
http://forum.xda-developers.com/showthread.php?t=2086769
THAT
Sent from my SPH-L900 using xda app-developers app
Tw1sted247 said:
Go to Android development and look for billiard412's thread he had a back to stock setup that works very well.
Click to expand...
Click to collapse
00mred00 said:
http://forum.xda-developers.com/showthread.php?t=2086769
THAT
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Thanks for help and suggestions.
All systems are go on my phone now, I downloaded the stock file from Samsungupdates.com, then installed it thru Odin and it worked like a charm.
Where did you find the stock file from samsungupdates.com? I can't find it anyway. I've been stuck on this for nearly a day now. I've learned quite a bit of new stuff... more than I care to know lol. I know there is a solution to this, I just need some guidance please.
QuantumPSI said:
Where did you find the stock file from samsungupdates.com? I can't find it anyway. I've been stuck on this for nearly a day now. I've learned quite a bit of new stuff... more than I care to know lol. I know there is a solution to this, I just need some guidance please.
Click to expand...
Click to collapse
here the link to the page
http:// samsung-updates.com/device/?id=SPH-L900 (remove the spaces)
download the middle link, it should take about 2 hours, run this file thru Odin as if it were any other TAR
After you download, this is what the file should be: KIES_HOME_L900VPALJ1_L900SPTALJ1_265523_REV04_user_low_ship.tar.md5
lexvdub1 said:
here the link to the page
download the middle link, it should take about 2 hours, run this file thru Odin as if it were any other TAR
After you download, this is what the file should be: KIES_HOME_L900VPALJ1_L900SPTALJ1_265523_REV04_user_low_ship.tar.md5
Click to expand...
Click to collapse
I REALLY NEED THIS FILE CAN YOU SEND IT TO ME PLZ! THE SITE IS DOWN..I used cdma ws 3.8.0 wont read my note 2 sph-l900 even connected to the correct com and in diag mode with pda and then dm+modem+adb...never had this problem before, I even flashed lj1 and ljc stock roms and still say's FAILED..PHONE DOES NOT ANSWER! I've flashed many phones and usually all I'd have to do is change the usb cable or the com port but even then it's not working.
Doesn't get any easier than this right here:
http://forum.xda-developers.com/showthread.php?t=2086769
Sent from my SPH-L900 using xda app-developers app
Well I was on the 4/10 nightly for CM 10.1, and I wanted to switch back to a stock TW ROM, so I downloaded and flashed PlainJane. Upon reboot my phone demanded that I reset my data because encryption had failed, and I never had my device encrypted, but the only thing I could do was press reset. So I did, and the phone booted into TWRP and flashed a quick message and rebooted to the same screen. I thought oh well no biggie I can restore my backup...NOPE. Looks like my SD card decided to corrupt. Well hey theres Odin right? WRONG AGAIN. I tried the method at
http://www.sxtpdevelopers.com/showthread.php?t=74 and Odin tells me
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> modem.bin
<ID:0/006> param.bin
<ID:0/006> recovery.img
<ID:0/006> sboot.bin
<ID:0/006>
<ID:0/006>
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I cannot boot into recovery because it tells me a firmware update has failed. Please someone help...
When you use ljc it will always fail at sbin it's not going to install the old boot loader use the new tar from This thread
http://forum.xda-developers.com/showthread.php?t=2086769
Sent from my SPH-L900 using Xparent BlueTapatalk 2
Epix4G said:
When you use ljc it will always fail at sbin it's not going to install the old boot loader use the new tar from This thread
http://forum.xda-developers.com/showthread.php?t=2086769
Sent from my SPH-L900 using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
THANK YOU SO MUCH! I got TWRP up and running and I'm flashing the stock reset now .
Hello,
I have been trying to root my galaxy s3 sgh t999v by the root66 method. I have done this method before and then returned to stock, and now choosing to go back to a custom rom. However, this time odin has been failing and not allowing me to root my phone, I am using the right files as well as the stock cable that came with the s3. I have twrp installed by going through odin and installing that. But now it is stuck on either a boot loop or if I try installing the root66 or stock rom it will take me to the stuck in "please connect to kies " recovery mode screen..
Not sure what to do, any help is appreciated thank you
What does it say in odins message box after flashing?
Sent from my SAMSUNG-SGH-I747 using Tapatalk
DocHoliday77 said:
What does it say in odins message box after flashing?
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_T999VVLALH2_T999VYVLALH2_CL1030062_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Heres the exact message
You can't downgrade, that's why you're getting that message. So either flash the same firmware version you had last, or a newer one
Yeah, that's 4.0.4 firmware. Try a more recent build. You can get it from my firmware thread too btw. Should give you a faster download.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Okay will try the same firmware, thanks for the quick replies
I have a bit of a problem, I was on 4.4.2 but I don't see any root66 methods for 4.4.2, will I have to find another method?
Oh ok. Didn't realize you were on the latest, sorry. Flash the official firmware and then root with Towelroot. I have a thread for this in the General section.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Thanks a lot! It worked Really appreciate the help
No problem! Glad to hear it!
Sent from my SAMSUNG-SGH-I747 using Tapatalk