Develop Bugs

Going back to stock....I'm getting a fail

I reinstalled the drivers, reinstalled odin, re-downloaded the LJ1 MD5, used different cables, but everytime I getting this in the Odin screen
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SPH-L900_L900VPALJ1_L900VPALJ1_L900SPTALJ1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> boot.img
<ID:0/011> NAND Write Start!!
<ID:0/011> cache.img
<ID:0/011> hidden.img
<ID:0/011> modem.bin
<ID:0/011> param.bin
<ID:0/011> recovery.img
<ID:0/011> sboot.bin
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<ID:0/011> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/011> Removed!!
Anyone have any other method I can try to get back to complete stock. Any ideas would be appreciated.

Go to Android development and look for billiard412's thread he had a back to stock setup that works very well.

http://forum.xda-developers.com/showthread.php?t=2086769
THAT
Sent from my SPH-L900 using xda app-developers app

Tw1sted247 said:
Go to Android development and look for billiard412's thread he had a back to stock setup that works very well.
Click to expand...
Click to collapse
00mred00 said:
http://forum.xda-developers.com/showthread.php?t=2086769
THAT
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Thanks for help and suggestions.
All systems are go on my phone now, I downloaded the stock file from Samsungupdates.com, then installed it thru Odin and it worked like a charm.

Where did you find the stock file from samsungupdates.com? I can't find it anyway. I've been stuck on this for nearly a day now. I've learned quite a bit of new stuff... more than I care to know lol. I know there is a solution to this, I just need some guidance please.

QuantumPSI said:
Where did you find the stock file from samsungupdates.com? I can't find it anyway. I've been stuck on this for nearly a day now. I've learned quite a bit of new stuff... more than I care to know lol. I know there is a solution to this, I just need some guidance please.
Click to expand...
Click to collapse
here the link to the page
http:// samsung-updates.com/device/?id=SPH-L900 (remove the spaces)
download the middle link, it should take about 2 hours, run this file thru Odin as if it were any other TAR
After you download, this is what the file should be: KIES_HOME_L900VPALJ1_L900SPTALJ1_265523_REV04_user_low_ship.tar.md5

lexvdub1 said:
here the link to the page
download the middle link, it should take about 2 hours, run this file thru Odin as if it were any other TAR
After you download, this is what the file should be: KIES_HOME_L900VPALJ1_L900SPTALJ1_265523_REV04_user_low_ship.tar.md5
Click to expand...
Click to collapse
I REALLY NEED THIS FILE CAN YOU SEND IT TO ME PLZ! THE SITE IS DOWN..I used cdma ws 3.8.0 wont read my note 2 sph-l900 even connected to the correct com and in diag mode with pda and then dm+modem+adb...never had this problem before, I even flashed lj1 and ljc stock roms and still say's FAILED..PHONE DOES NOT ANSWER! I've flashed many phones and usually all I'd have to do is change the usb cable or the com port but even then it's not working.

Doesn't get any easier than this right here:
http://forum.xda-developers.com/showthread.php?t=2086769
Sent from my SPH-L900 using xda app-developers app

HELP. Maybe bricked phone?

Well I was on the 4/10 nightly for CM 10.1, and I wanted to switch back to a stock TW ROM, so I downloaded and flashed PlainJane. Upon reboot my phone demanded that I reset my data because encryption had failed, and I never had my device encrypted, but the only thing I could do was press reset. So I did, and the phone booted into TWRP and flashed a quick message and rebooted to the same screen. I thought oh well no biggie I can restore my backup...NOPE. Looks like my SD card decided to corrupt. Well hey theres Odin right? WRONG AGAIN. I tried the method at
http://www.sxtpdevelopers.com/showthread.php?t=74 and Odin tells me
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> modem.bin
<ID:0/006> param.bin
<ID:0/006> recovery.img
<ID:0/006> sboot.bin
<ID:0/006>
<ID:0/006>
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I cannot boot into recovery because it tells me a firmware update has failed. Please someone help...

When you use ljc it will always fail at sbin it's not going to install the old boot loader use the new tar from This thread
http://forum.xda-developers.com/showthread.php?t=2086769
Sent from my SPH-L900 using Xparent BlueTapatalk 2

Epix4G said:
When you use ljc it will always fail at sbin it's not going to install the old boot loader use the new tar from This thread
http://forum.xda-developers.com/showthread.php?t=2086769
Sent from my SPH-L900 using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
THANK YOU SO MUCH! I got TWRP up and running and I'm flashing the stock reset now .

*soft brick*failed odin*need help!*

I was on Paranoid Android. Wanted to switch back to a TW so I went to Goodness Noteworthy and flashed the mc2 modem. had problems with updating my prl and getting service, so I decided it was time for me to revert back to stock. odin will not flash stock. please help!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> COMBINATION_L900VPLJ1_L900VPALJ1_CL265523_HWID04_HW-Rev0406_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> param.bin
<ID:0/005> recovery.img
<ID:0/005> sboot.bin
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.

Try once more.
Odin did that to me where everything in the log was successful, but failed in the end. I tried again and it worked. I don't know why.

Lord Sekhmet said:
Try once more.
Odin did that to me where everything in the log was successful, but failed in the end. I tried again and it worked. I don't know why.
Click to expand...
Click to collapse
have tried a bunch of times now. i have tried a handful of different .tar files too. I cant get any of them to work =[

I am new all this and am learning to tinker, brick and fix too.
Here is a trick I came up with. Get a Micro SD card. Download a ROM and anything else you need to it. Put in phone. Go into recovery. Flash away.

Lord Sekhmet said:
I am new all this and am learning to tinker, brick and fix too.
Here is a trick I came up with. Get a Micro SD card. Download a ROM and anything else you need to it. Put in phone. Go into recovery. Flash away.
Click to expand...
Click to collapse
I cant even get into recovery =[

Your problem is probably beyond me in my learning curve.
But, just to make sure you know this trick. Pull the battery. Place fingers on Power, Home and Volume Up buttons. Hold those buttons tightly while inserting the battery. Keep holding until the recovery screen appears.
Good luck!
If I find or figure out another method I will post again.

You can not downgrade because of your sboot try the mc2 odin file.
Sent from my SPH-L900 using xda premium

shabgard said:
You can not downgrade because of your sboot try the mc2 odin file.
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
I will give that a try. its just in the modems section right?

djkozdefantastico said:
I will give that a try. its just in the modems section right?
Click to expand...
Click to collapse
Download of these 2 files from this site, you need to reflash the whole system dump:
http://www.rwilco12.com/downloads.p...ote II (SPH-L900)/Stock ROMs/MC2/Full Restore

[Q] Can I do a factory Reset with Odin on MK2?

Is it possible to do a factory reset with Odin? I flashed this rom http://forum.xda-developers.com/showthread.php?t=2268880 on to my phone but it's on M919UVUEMK2. Currently, my phone is soft bricked and I can only go into download mode and I can't install the clockwork recovery mod. My phone will boot to the Galaxy S4 logo and turnoff.

re: odin flash
Trong357 said:
Is it possible to do a factory reset with Odin? I flashed this rom http://forum.xda-developers.com/showthread.php?t=2268880 on to my phone but it's on M919UVUEMK2. Currently, my phone is soft bricked and I can only go into download mode and I can't install the clockwork recovery mod. My phone will boot to the Galaxy S4 logo and turnoff.
Click to expand...
Click to collapse
About the only thing you can do is start all over again and put your phone into download
mode and flash the official stock samsung 4.2.2 MDL odin flash firmware.
After that you can root and odin flash twrp or cwm custom recovery.
Here is a link for the official samsung m919 4.2.2 stock mdl firmware:
http://k0nane.info/rom/M919UVUAMDL_M919TMBAMDL_TMB.zip
After downloading unzip and you will find the .TAR file which you
need to use with Odin in it's PDA slot.
Good luck!

How can I see my modem on my phone. I just want to be sure what the modem I have now.
Sent from my SGH-M919 using xda premium

xperia_88 said:
How can I see my modem on my phone. I just want to be sure what the modem I have now.
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
In Settings/More/About device/Baseband
☞ Sent from here☜???

Thanks but it didn't work. Odin keeps say it failed.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sbl2.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)

Trong357 said:
Thanks but it didn't work. Odin keeps say it failed.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sbl2.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
You're using a stock FW to go from 4.3 to 4.2.2 which is not possible. You have to use a 4.3 stock FW to go back to stock. Once you're on the 4.3 boot loader, you're stuck with 4.3. You can NOT downgrade to a different bootloader.
---------- Post added at 01:09 AM ---------- Previous post was at 01:05 AM ----------
Download the 4.3 FW from here, should be the first link.

Thanks but:"Hotfile has been shudown. A download link to Terafile will be presented as soon as the firmware is uploaded. We are busy uploading all files to the new host. We apologize for the inconvenience."

re: official stock m919 firmware
Trong357 said:
Thanks but:"Hotfile has been shudown. A download link to Terafile will be presented as soon as the firmware is uploaded. We are busy uploading all files to the new host. We apologize for the inconvenience."
Click to expand...
Click to collapse
Here is the identical firmware as found on SamMobile.com
This is the M919UVUEMK2_M919TMBEMK2_TMB.zip
This contains the TAR file for the official Samsung M919 MK2 4.3 stock firmware.
Here is the direct download link: https://copy.com/hzfaqBpWhinn/M919UVUEMK2_M919TMBEMK2_TMB.zip?download=1
This is a much faster mirror than the Hotfile host which SamMobile uses.
Good luck!

Thanks and thank you and to everyone else who helped. The rom installed successfully but when I tried to turn the phone on, it gets to the T-Mobile splash screen and doesn't go on from there. I left it there for nearly 30 min but it didn't load and the phone was very hot. I re-Odin the rom and tried wiping cache partition and dalvik in recovery but the phone never goes past the T-Mobile screen.

Misterjunky, sir. Thank you!. Your link helped me to unbrick. I've a working ROM now. My root is gone, wifi slightly flaky - but hey can make calls etc.!
I am on 4.3 + MK2 now. My warranty is void etc..but really thank u very much!.

[Q&A] [HOWTO][TAR][OUDHS] THE ODIN THREAD :: Return to stock, fix soft brick :: 5/7/

[Q&A] [HOWTO][TAR][OUDHS] THE ODIN THREAD :: Return to stock, fix soft brick :: 5/7/
Q&A for [HOWTO][TAR][OUDHS] THE ODIN THREAD :: Return to stock, fix soft brick :: 5/7/13 MDL
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [HOWTO][TAR][OUDHS] THE ODIN THREAD :: Return to stock, fix soft brick :: 5/7/13 MDL. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

i did all this to my s4 but now when i boot it, says Kernel Is Not Seandroid Enforcing, Set Warranty Bit
also when i booted the phone the wifi does not work. could you help with this problem?

Samsung Galaxy S4
Is This ''UVUAMDL Official TAR'' for Samsung Galaxy S4?

Ayaz Gill said:
Is This ''UVUAMDL Official TAR'' for Samsung Galaxy S4?
Click to expand...
Click to collapse
Yes

UPDATE: I fixed the issue while posting this, the solution is included. I am hoping by posting this it may help someone having the same problem, because I spent hours and days trying to solve the issue. Sorry the post is so long.
This is my first post.. I am in desperate need of help!
I have searched everywhere, and cannot find any answers really.
I rooted my M919 at one point, and I could not receive OTA updates.
I do not know if it was rooted when I tried to update it with Odin though.
I was in a hurry (I know BIG mistake) and I never wiped my phone or anything before trying to flash the phone.
I think the phone may not be working because I may have not used triangle away before, but I am not sure if I ever used it. I did the root a long time ago.
I have tried changing USB cords, computers, drivers, md5 files, different Odin versions, flashing PIT file, you name it, I have probably tried it
When I boot the phone the currupt recovery screen shows up. Kies will not recognize the phone.
In the left corner it says:
ODIN MODE
...SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMMC BURST MODE enabled
I can still access "downloading" mode, and it says the same as above.
Odin gives me different errors depending on the file I am attempting to flash
The reason I tried flashing the PIT file is because it would sometimes say
I am not completely sure what update I was using before this all happened, but I think it may have been this one, unrooted?:
CF-Auto-Root-jfltetmo-jfltetmo-sghm919.tar.md5
Error codes are as follows:
While flashing 4.4.4 (Odin 3.10)
M919UVUFNH7_M919TMBFNH7_M919UVUFNH7_HOME.tar.md5
JFLTE_USA_TMO_16G.pit
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUFNH7_M919TMBFNH7_M919UVUFNH7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Recovery File I found (Odin 3.09)
JFLTE_USA_TMO_16G.pit
openrecovery-twrp-2.8.0.1-jfltetmo.tar
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Recovery File I found (Odin 3.09)
JFLTE_USA_TMO_16G.pit
openrecovery-twrp-2.8.0.1-jfltetmo.tar
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
One time I tried using this and it passed!!!
This ONLY works on 3.07 to my knowledge though. It fails on every other Odin
Recovery File I found (Odin 3.07)
JFLTE_USA_TMO_16G.pit
openrecovery-twrp-2.8.0.1-jfltetmo.tar
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
The screen is now frozen on the "Samsung Galaxy S4" screen and just shuts off if trying to boot into recovery mode.
If plugged into USB while trying to boot into recovery it launches the recovery file I just flashed!
I went back into download mode, and plugged the phone back in.
I opened Odin 3.07 again, since I had success with the recovery file.
I tried flashing 4.4.4 again M919UVUFNH7_M919TMBFNH7_M919UVUFNH7_HOME.tar.md5
and it failed while only having Auto Reboot checked. I tried launching it with Auto Reboot AND F Reset Time, and it worked!! Hope this helps someone!!

Hi DarkMenace - would it be possible for you to send me signed M919 PIT file as well? Thanks

shaqto said:
Hi DarkMenace - would it be possible for you to send me signed M919 PIT file as well? Thanks
Click to expand...
Click to collapse
Replied to your email. Not sure if I still have it but I may be able to find it if you say it's not there.

alright i did a no no... I tried flashing back to stock odin when my phone was encrypted .. now its softbricked.
everytime i try to flash the stock odin, it always fails at system.img ext4. Need some help guys, its been softbricked for a week. I flashed philz touch twrp on it so I do recovery on it. any ideas?

doesnt work
Bricked my s4/but i had twrp installed to fix it

I'm getting a Fail message in Odin over and over. I've downloaded the .zip twice so I don't think it's an issue with a corrupt file... The .dll is in my Odin folder and everything. Pretty confused and today is my last day to send my phone back into T-Mobile before they charge me.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)

asmth00 said:
I'm getting a Fail message in Odin over and over. I've downloaded the .zip twice so I don't think it's an issue with a corrupt file... The .dll is in my Odin folder and everything. Pretty confused and today is my last day to send my phone back into T-Mobile before they charge me.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
What version Bootloader/Modems do you have now on the phone? If the version you have now has Knox, then you can't downgrade to MDL.
If you are not sure, you can use this free app: https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo&hl=en
If the version is MK2 or newer, you can't downgrade to MDL.
You can find newer firmwares either on the SamMobile.com site, or on this thread: http://forum.xda-developers.com/galaxy-s4-tmobile/general/firmwares-official-mdl-mk2-nb4-t2816508
Rob

<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!

In odin, it says 0:[COM4] on the top left
You have 0:[COM3] in your screenshot
Is there a problem or something?Or is it fine?

<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SGH-M919-UVUAMDB-k0nane.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
I get this when i click start
i have a gt-1905 softbricked
please help me

AziNoapte said:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SGH-M919-UVUAMDB-k0nane.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
I get this when i click start
i have a gt-1905 softbricked
please help me
Click to expand...
Click to collapse
If you have a GT-1905 (which I can't find), you shouldn't be trying to flash FIRMWARE for a T-Mobile phone (SGH-M919). That will brick your phone.
If it is an S4, you should be able to take off the back and look under the battery for the model number.
You can flash ROMs, but not firmware between different S4 models. Try finding the FIRMWARE for your phone, and flash that. Also, verify your model, because GT-1905 isn't a Samsung model number.
You can find firmwares here: http://www.sammobile.com/firmwares/
Rob

rlichtefeld said:
If you have a GT-1905 (which I can't find), you shouldn't be trying to flash FIRMWARE for a T-Mobile phone (SGH-M919). That will brick your phone.
If it is an S4, you should be able to take off the back and look under the battery for the model number.
You can flash ROMs, but not firmware between different S4 models. Try finding the FIRMWARE for your phone, and flash that. Also, verify your model, because GT-1905 isn't a Samsung model number.
You can find firmwares here: ------------To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links--------------
Rob
Click to expand...
Click to collapse
i messed up the writing cuz i was scared
I have 19505
I managed to get to 4.2.2 with konane`s guide,got the stock tar but wifi doesnt work on my S4
Can you help me fix it?
Or if it is impossible, can i upgrade to KitKat?

AziNoapte said:
i messed up the writing cuz i was scared
I have 19505
I managed to get to 4.2.2 with konane`s guide,got the stock tar but wifi doesnt work on my S4
Can you help me fix it?
Or if it is impossible, can i upgrade to KitKat?
Click to expand...
Click to collapse
Since this forum is for the T-Mobile variant of the S4, and I'm not familiar with the GT-I9505, I would suggest you try the forum for that model:
http://forum.xda-developers.com/galaxy-s4
If you flashed a T-Mobile tar to your I9505, it is probably because of the radio/modem which was designed for the T-Mo model. There should be links in that forum about no WiFi, etc.
Rob

Hello gang. Got a new circuit board installed two weeks ago. Got the phone back, started setting it up, and after about an hour the touchscreen quit working. >8\
I emailed the shop and they said "could be because you're rooted."
Smelled like bull**** to me, but giving them the benefit of the doubt I figured I'd try to flash back to stock. (Which I WAS actually stock, I had the 4.4.4 OTA update, and then rooted and de-bloated.)
Anyway, I downloaded the "Stock firmware" (SGH-M919-UVUAMDB-k0nane.tar.md5) from post 1 in the title thread and flashed it with Odin.
SEEMS to be working, but oddly enough I have a M919UVUFNH7 baseband and bootloader, but Android 4.4.2, which based on my reading, should be impossible?
Also, like several other posters, I have no wifi.
In any event, I am currently downloading the NH7 firmware from sammobile. Says 2 hours to go.
Will try to flash that with Odin and we'll see what happens. Anyone have suggestions in the meantime?

OK - follow-up. I downloaded M919UVUFNK2_M919TMBFNK2_M919UVUFNK2_HOME.tar and flashed it with Odin. Even though Odin said "Boot" and "Modem" in the flashing process, I still seem to have NH7 bootloaders and baseband.
Help?

Well, never mind. I don't care anymore. Tried to replace my glass and cracked the digitizer. Dunno if I'm down to drop another $120 on this thing now.
$300 purchase price
$100 circuit board replacement
$12 glass
Now $120 for a display? I might just call knock it off with this thing.