This Guide Will Show you how to Unbrick your Galaxy Y
Things That You Need:
*A Computer(Windows XP, Windows 7, Windows Vista, Windows 8, Windows 10)
*A USB Cable
*Properly Installed Samsung USB drivers to Connect your phone to Computer Click the Link below to download Samsung USB Drivers
http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows
*Odin 1.84/Odin1.85 Click The Link Below to Download Odin
http://forum.xda-developers.com/showthread.php?t=1262272
Disclaimer: I'm not responsible for any damage done to your phone.
Note: Samfirmware doesn't let you download Stock Roms for Galaxy Y anymore as it is an old device. Updated the guide below since I found another way on how to get the Stock Rom, It might be longer than usual but its the only way to ensure that we get the Official Stock Rom. I no longer have the device(GT-S5360) but the software that I found is the one that I use to download Stock Rom for my old device.
Instructions
1.Download the software below so we can download the Stock Rom. Click on the link then click the Blue Download Button
http://www.mediafire.com/file/2xtp37e2lq4w8wm/Frija-v1.4.2.zip/file
2.Open the Zip File then Extract the files to your folder of Choice or drag and drop it to another folder
3.Go to the Folder where you extracted the files then right click on Frija.exe then press Run as Administrator then press Yes if prompted.
4. Now the Frija Interface will show up. Make sure the Auto Box has Check on it. Now, You should focus only in Model Section and the CSC Section. On the Model Section, Type in GT-S5360.
5. For the CSC Section, We need to search this based on the country of your phone or where you bought the phone. Here is the link: https://www.sammobile.com/samsung/galaxy-y/firmware/#GT-S5360 . Now once you opened the link, You'll need to find the Country/Carrier of the Country where you bought the phone and Carrier too if you bought it of a Carrier. Now once you found the your Country, Tap on the name of the Country and then look for Product Code. You can find below an example of the Product Code so you have a guide on how to find It. Once you found the Product Code, Go back to Frija and then on the CSC Section, Type it in then once your done. Press Check Update.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6. Now the boxes below the Frija Software will automatically generate the Information of the Stock Rom, Then on the Lower of the Frija Software, Press Download button.
7.A dialog box will show up where you want to save the Stock Rom then once you're done, Press Save.
8. The download will start then wait until it says Download Complete.
9. Go to the Location where you chose to save the Stock Rom then double click on the Zip file.
10.Extract The Zip File You Downloaded Above
11.Open Odin 1.85(Windows 7 Run as Administrator)
(Locate the Firmware files, The Zip files we extracted)
12.Click PDA - PDA_S5360_*****.tar.md5
13.Click Phone - MODEM_S5360_*****..tar.md5
14.Click CSC - CSC_S5360_******.tar.md5
15.Now turn off your Galaxy Y {Remove the battery}
16.Now attach/connect your phone to computer via USB cable.
17.Press and Hold Volume Down button+Home button+Power button for 5 Seconds
18.Now you booted up on Download mode, Press Volume Up button to Continue
19.Wait for a Yellow text to appear
20.Click Start
21.And let ODIN do its work and wait till you see PASS in green color, it means the flashing process is completed successfully
22.You Sucessfully Flashed your phone..!!
23.Insert the battery and Boot up your phone and Enjoy..!!
Comment for Any Problems?? Thank You
Device:Samsung Galaxy Y GT-S5360
Rom:Lenox Evolution 2.2
Kernel:Savie Kernel
Device:Samsung Galaxy S Duos 2 GT-S7582
Rom:Stock Jellybean 4.2.2
Kernel:Stock kernel
Device:Samsung Galaxy J2 SM-J200GU
Rom:Stock Lollipop 5.1.1
Kernel:Stock kernel
Device:Samsung Galaxy J7 Core SM-J701F
Rom:Stock Oreo 8.1.0
Kernel:Stock kernel
Device:Samsung Galaxy A50 SM-A505GN/DS
Rom:Stock Pie 10
Kernel:Stock kernel
Sent from SM-J200GU using Tapatalk 2
you should change following things..
1) you can do this procedure in windows 8
2) its not neccessary that battery must be fully charged.....
you can do whole procedure by removing battery too....
so edit above things....
Sent from my GT-S5360
LetJect said:
you should change following things..
1) you can do this procedure in windows 8
2) its not neccessary that battery must be fully charged.....
you can do whole procedure by removing battery too....
so edit above things....
Sent from my GT-S5360
Click to expand...
Click to collapse
YUP! BROTHER THE WHOLE PROCESS IS ALSO RUN WHEN WE REMOVE THE BATTERY.....CAUSE ODIN FLASH DOES NOT REQUIRE A PHONE WITH BATTERY.....
FOR YOUR KIND INFORMATION Hikachu321 --CONNECT THE PHONE WITHOUT A BATTERY WITH PC BY DATA CABLE;AND PRESS VOL DOWN+POWER+HOME KEY TOGETHER...THEN YOUR PHONE AUTOMATICALLY GOES TO ODIN MODE WITHOUT A SINGLE BATTERY.....
BUT THANKS FOR THE GUIDE......
I Tried to remove the battery to enter to download mode and it works!! Well anyways I updated the guide!!
Device:Samsung Galaxy Y GT-S5360
Rom:Lenox evolution V2
Kernel:Savie kernel#73
Sent from my GT-S5360 using Tapatalk 2
hikachu321 said:
This Guide Will Show you how to Unbrick your Galaxy Y
Things That You Need:
*A Computer(Windows XP,Windows 7,Windows Vista,Windows 8)
*A USB Cable
*Properly Installed Samsung USB drivers to Connect your phone to Computer Click the Link below to download Samsung USB Drivers
http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows
*Odin 1.84/Odin1.85 Click The Link Below to Download Odin
http://forum.xda-developers.com/showthread.php?t=1262272
Disclaimer: I'm not responsible for any damage done to your phone.
Instructions
1.Download the firmware of Your Country Click The Link Below
http://forum.xda-developers.com/showpost.php?p=21846620&postcount=1
2.Extract The Two Zip Files You Downloaded Above
3.Open Odin 1.85(Windows 7 Run as Administrator)
(Locate the Firmware files)
4.Click PDA - PDA_S5360_*****.tar.md5
5.Click Phone - MODEM_S5360_*****..tar.md5
6.Click CSC - CSC_S5360_******.tar.md5
7.Now turn off your Galaxy Y {Remove the battery}
8.Now attach/connect your phone to computer via USB cable.
9.Press and Hold Volume Down button+Home button+Power button for 5 Seconds
10.Now you booted up on Download mode, Press Volume Up button to Continue
11.Wait for a Yellow text to appear
12.Click Start
13.And let ODIN do its work and wait till you see PASS in green color, it means the flashing process is completed successfully
13.You Sucessfully Flashed your phone..!!
14.Insert the battery and Boot up your phone and Enjoy..!!
Comment for Any Problems?? Thank You
Device:Samsung Galaxy Y GT-S5360
Rom:Remix V2.5
Sent from GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
I've follow above procedure till step 10 and stuck on downloading screen, and no sign of progress (blinking text or something)
Upon rechecking, I found out that firmware files are with .rar extension without .md5. what is .md5 means?
works for me everytime..
Can I just say Hotfile's dead so we can't download the firmwares?
Just check the sticky,on android development section.....the firmwares are reuploaded
DC07 said:
Just check the sticky,on android development section.....the firmwares are reuploaded
Click to expand...
Click to collapse
Okay thanks. Going there now.
thanks
but you can do it through stock recovery
galaxy y still off, although it was flashed by odin
hi i have done up to the part where you get a PASS but my phone still is off. what is the problem?
hikachu321 said:
This Guide Will Show you how to Unbrick your Galaxy Y
Things That You Need:
*A Computer(Windows XP,Windows 7,Windows Vista,Windows 8)
*A USB Cable
*Properly Installed Samsung USB drivers to Connect your phone to Computer Click the Link below to download Samsung USB Drivers
http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows
*Odin 1.84/Odin1.85 Click The Link Below to Download Odin
http://forum.xda-developers.com/showthread.php?t=1262272
Disclaimer: I'm not responsible for any damage done to your phone.
Instructions
1.Download the firmware of Your Country Click The Link Below
http://forum.xda-developers.com/showpost.php?p=21846620&postcount=1
2.Extract The Two Zip Files You Downloaded Above
3.Open Odin 1.85(Windows 7 Run as Administrator)
(Locate the Firmware files, The Zip files we extracted)
4.Click PDA - PDA_S5360_*****.tar.md5
5.Click Phone - MODEM_S5360_*****..tar.md5
6.Click CSC - CSC_S5360_******.tar.md5
7.Now turn off your Galaxy Y {Remove the battery}
8.Now attach/connect your phone to computer via USB cable.
9.Press and Hold Volume Down button+Home button+Power button for 5 Seconds
10.Now you booted up on Download mode, Press Volume Up button to Continue
11.Wait for a Yellow text to appear
12.Click Start
13.And let ODIN do its work and wait till you see PASS in green color, it means the flashing process is completed successfully
13.You Sucessfully Flashed your phone..!!
14.Insert the battery and Boot up your phone and Enjoy..!!
Comment for Any Problems?? Thank You
Device:Samsung Galaxy Y GT-S5360
Rom:Lenox Evolution v2.2
Kernel:Savie's kernel #54
Sent from GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
Ahaiziah said:
hi i have done up to the part where you get a PASS but my phone still is off. what is the problem?
Click to expand...
Click to collapse
Simply turn on the phone. If the phone always stuck on boot animation, reboot to stock recovery (Vol UP+Home+Power) and select wipe data/factory reset.
Sent from my GT-S5300 using Tapatalk 0.01a
1. Love doesn't need any reason.
2. Wanna speed up 3G (not 4G LTE)?
Here it is:
http://forum.xda-developers.com/showthread.php?t=2586876
Rebooting in download mode
Hi I have a Samsung Galaxy Y which worked worked good until yesterday night.I was unchecking my alarms for tomorrow and suddenly it shutdown and the galaxy y boot logo came,I thought it was usual as it happened before and device came back to its state after some time but this time it didn't happened like this instead it kept rebooting and rebooting , I tried many ways.I tried going recorvery mode but it rebooted from there as soon as I went there.One time I was lucky enough to have some time to delete cache and wipe the phone but it didn't worked then i tried going in download mode with the odin1.85 but it didn't lety the windows install that driver thing because whenever I went into the download mode it kept restarrting giving windows no time to install the drivers and I am now very frustrated please help me how can I stop this restarting , thanks
dudePUNJABI said:
Hi I have a Samsung Galaxy Y which worked worked good until yesterday night.I was unchecking my alarms for tomorrow and suddenly it shutdown and the galaxy y boot logo came,I thought it was usual as it happened before and device came back to its state after some time but this time it didn't happened like this instead it kept rebooting and rebooting , I tried many ways.I tried going recorvery mode but it rebooted from there as soon as I went there.One time I was lucky enough to have some time to delete cache and wipe the phone but it didn't worked then i tried going in download mode with the odin1.85 but it didn't lety the windows install that driver thing because whenever I went into the download mode it kept restarrting giving windows no time to install the drivers and I am now very frustrated please help me how can I stop this restarting , thanks
Click to expand...
Click to collapse
Try to reboot to download mode with USB Cable attached and pull the battery.
Updated already the Firmware's Link..!!
I passed all the steps successfully but still i am stuck on the boot animation screen.plz help brother.....
---------- Post added at 05:48 PM ---------- Previous post was at 05:32 PM ----------
I have passed all steps successfully....Still it is stuck on boot animation page.......Stock recovery mode not coming up now.....please help me brother.....
devamrit said:
I passed all the steps successfully but still i am stuck on the boot animation screen.plz help brother.....
---------- Post added at 05:48 PM ---------- Previous post was at 05:32 PM ----------
I have passed all steps successfully....Still it is stuck on boot animation page.......Stock recovery mode not coming up now.....please help me brother.....
Click to expand...
Click to collapse
Just Try To Flash Stock Rom Again
devamrit said:
I passed all the steps successfully but still i am stuck on the boot animation screen.plz help brother.....
Click to expand...
Click to collapse
this thread is abit out of date
use odin 3.07
download a wipe firmware pack from my firmware thread at the top of the 5360 dev section
make sure odin is connected - will say com then a number in a coloured box under com:id
My galaxy y is not connecting with odin3 what should I do????
Prayas M4A1 said:
My galaxy y is not connecting with odin3 what should I do????
Click to expand...
Click to collapse
installed samsung usb drivers here
turn phone off (or pull battery and put back in)
put your phone into download mode - hold vol down home button then with them held also hold power button
connect usb cable from phone to pc (use rear usb ports not front ones if you have front usb)
push vol up to start connection (if drivers are installed it should say android adb in device manager)
open odin 3.07 (other versions may work but thats the one I use)
if odin is connected it will say com then a number is a coloured box under com:id on the left hand side
only auto reboot and F.reset time shoud be ticked - DO NOT tick anything else!
put pda in pda
put phone in modem
put csc in csc
start the flashing process
you can get odin flashable firmware from my thread here
Related
About one month i bricked my phone , so i installed cyanogenmod 7 , so i was wondering can i re install the stock rom
i searched and the answer was something about odin so plz can somebody explain the procedure and can it work ???
hubix said:
Hey guys,
in this tutorial I will show you how to upgrade and root your Samsung Galaxy Ace S5830. This method is the simplest way to do it.
Shall not be liable for any resulting damage to your phone! Everything you do at your own risk!
if you don't understand what is root, ROM, phone, flash, CMD etc. watch this movie: http://www.youtube.com/watch?v=JmvCpR45LKA
You will need (most files are available below this post):
- PC with Windows XP SP2 or later
- .Net Framework 2.0 or later (x86: http://www.microsoft.com/download/en/details.aspx?id=19 x64: http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=6523)
- Samsung Galaxy Ace GT-S5830
- USB to Micro-USB cable
- ODIN 4.38 (here: http://www.multiupload.com/MUBOZPEOS3)
- OPS file (You must be registered to download: http://www.samfirmware.com/WEBPROTECT-s5830.htm)
C. Flashing the newest firmware:
1) Turn off your phone
2) Remove your SIM Card and SD Card
3) Extract previously downloaded firmware
4) Open ODIN 4.38 on your PC
5) Select from extracted archive: OPS-OPS, Boot-APBOOT, Phone-MODEM, PDA-CODE, CSC-CSC (leave EFS and One Package empty)
6) Connect your phone via USB into PC
7) When the screen is turned on hold POWER+VOLUME DOWN+HOME and wait until the phone enters the Download Mode
8) If ODIN detected and recognised your phone should light up the first square to the left side
9) Press "Start" button and wait, the process should take ~5 minutes
10) If all goes well your phone should reboot automatically
11) Square should change the color to blue and display "PASS" it means that flashing process was successful and we have the newest firmware
12) Disconnect your phone
13) Turn off your phone
14) Insert your SIM Card and SD Card again
15) Turn on your phone
16) Now you have the newest firmware!
Click to expand...
Click to collapse
Use http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-S5830&r=-1#modelsa for the latest firmware.
Please use search before posting, there are already tutorials on using Odin.
Yes, it works!
Hi,
I was using my Grand Duos I9082 with great CWM11 4.4.2..
But due to change my phone with LG G2 nowadays, I'll give my phone to a friend but he needs dual sim option..
So, I need to flash original rom to on it.. I've downloaded these files:
Duos4.2.2stock-TUR-I9082XXUBMHC-20130906121521.zip (975.573.674 bytes)
and
I9082XXAMC7_I9082OJVAMC1_TUR.zip (827.176.269 bytes)...
I'm not sure which one is suitable for Turkish stock rom..
And how can I flash one of the file (if possible, tell me which one is better) via Odin?
I think I'll choose as PDA but I'm not sure another options required for Odin process..
If some expert tell me the whole process?
Thanks..
COA said:
Hi,
I was using my Grand Duos I9082 with great CWM11 4.4.2..
But due to change my phone with LG G2 nowadays, I'll give my phone to a friend but he needs dual sim option..
So, I need to flash original rom to on it.. I've downloaded these files:
Duos4.2.2stock-TUR-I9082XXUBMHC-20130906121521.zip (975.573.674 bytes)
and
I9082XXAMC7_I9082OJVAMC1_TUR.zip (827.176.269 bytes)...
I'm not sure which one is suitable for Turkish stock rom..
And how can I flash one of the file (if possible, tell me which one is better) via Odin?
I think I'll choose as PDA but I'm not sure another options required for Odin process..
If some expert tell me the whole process?
Thanks..
Click to expand...
Click to collapse
Here's the process
1.Turn off the device.
2. Boot in into Download Mode (to enter into download
mode you have to: press and keep holding the power,
volume down and home buttons in the same time).
3. While the device is into Download Mode, connect the
Samsung Galaxy Grand device to the PC via USB
cable.
4. Now, ensure that ODIN recognize the device, and the
“added” message is displayed, and ID:COM section is
yellow or blue. Note: if not, you will have to close the
ODIN app, disconnect the device by removing the
USB cable, change the USB port from the PC and
reinstall the USB Grand drivers once again. Then,
repeat all the steps from above.
5. Now, if everything is ok you can move to the next
step.
6. From ODIN app click on the “PDA” button.
7. Browse and pick the extracted firmware file from your pc
8. Next, from ODIN click on “START” button.
9. The installation process should begin immediately,
and you must wait until the firmware is being flashed.
10. When into ODIN app the “pass” message will be
displayed and the ID:COM section will turn green,
then the firmware is completely installed.
11. Now, you can disconnect the USB cable from PC.
12. Reboot the Galaxy Grand device.
Note: the first boot after the installation
process will take longer than usual, just be
patient.
If you still face some problem you can refer to guides in the general section.
There are some great guides there.
Sent from my GT-I9082 using XDA Premium 4 mobile app
manthan29jamdagni said:
Here's the process
1.Turn off the device.
2. Boot in into Download Mode (to enter into download
mode you have to: press and keep holding the power,
volume down and home buttons in the same time).
3. While the device is into Download Mode, connect the
Samsung Galaxy Grand device to the PC via USB
cable.
4. Now, ensure that ODIN recognize the device, and the
“added” message is displayed, and ID:COM section is
yellow or blue. Note: if not, you will have to close the
ODIN app, disconnect the device by removing the
USB cable, change the USB port from the PC and
reinstall the USB Grand drivers once again. Then,
repeat all the steps from above.
5. Now, if everything is ok you can move to the next
step.
6. From ODIN app click on the “PDA” button.
7. Browse and pick the extracted firmware file from your pc
8. Next, from ODIN click on “START” button.
9. The installation process should begin immediately,
and you must wait until the firmware is being flashed.
10. When into ODIN app the “pass” message will be
displayed and the ID:COM section will turn green,
then the firmware is completely installed.
11. Now, you can disconnect the USB cable from PC.
12. Reboot the Galaxy Grand device.
Note: the first boot after the installation
process will take longer than usual, just be
patient.
If you still face some problem you can refer to guides in the general section.
There are some great guides there.
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Next time just give link to the all in one thread...
http://forum.xda-developers.com/showthread.php?t=2616816
And it's called CM11 (CyanogenMod 11) not CWM (Clockworkmod)
naufalhadyan said:
Next time just give link to the all in one thread...
http://forum.xda-developers.com/showthread.php?t=2616816
And it's called CM11 (CyanogenMod 11) not CWM (Clockworkmod)
Click to expand...
Click to collapse
Ya ohk.
Sent from my GT-I9082 using XDA Premium 4 mobile app
Thank you for your help..
Dear manthan29jamdagni & naufalhadyan,
Thank you for your great help..
I'd handled it by your steps easily..
Fully appreciated..
Thank you very very much...
HAS ANYONE ELSE HAVE THIS ISSUE!!!
WON'T ALLOW BOOT INTO RECOVERY!!
Tired to flash the Wicked ROM for the I747 S3 model and right after wiping and flashing the ROM, the device shut off. Once I went to wipe and restore because clearly this ROM didn't work. I ended up with:
Could not do normal boot.
ODIN MODE
PRODUCT NAME: SGH-I747
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: Enabled
WARRANTY BIT: 1
BOOTLOADER AP SWREV: 2
I'm not doing this for warranty purposes, I'm just trying to revive my phone whether it be with or without root access.
Since you can get into download, try installing a custom recovery via Odin such as Philz Touch and then try to get into recovery. Maybe you existing recovery has been corrupted.
Perfect. Got it up and running. Thanks
Sent from my SAMSUNG-SGH-I337 using Tapatalk
P. Dexter85 said:
Perfect. Got it up and running. Thanks
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
Remember, as long as you are able to boot either in download mode or even your bootloader, you're pretty much guaranteed to get your phone back up and running. Although lets say you cannot access both, then you'll need to JTAG your device which may be difficult depending on your skill set in that area.
Can’t access to Download Mode or Recovery Mode after bricking AT&T Galaxy S3 i744 4.3
Hi I have (had) a AT&T galaxy S3 i747 with android 4.1.1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Because the phone is in another country I couldn’t update it by OTA to android 4.3
So I started to read forums that said how to Update AT&T S3 i747 to android 4.3 (I747UCUEMJB)
The S3 was not Root
I installed all the phone drivers in the computer
This is what I did: (http://forum.xda-developers.com/showpost.php?p=52341582&postcount=38)
- Use Odin 3.07
- Check Auto Reboot and Re-Partition, and uncheck all the boxes
- I put my phone in USB debugging in the developer options
- I turned it off
- Started to put the phone on Download Mode pressing volume DW+home+power button at the same time
- In Odin on the PDA box I checked and loaded the file .tar.md5 (I747UCUEMJB_2024954_REV04_user_low_ship.tar.md5 )
- Pressed the button Start
The installation seemed to go right, the program never showed anything weird.
When the Programs finished the installation the phone turned off and then turned on and show the logo of android (seemed to be lying down or inclined) and after that it turned off.
The computer showed that something was connected (QHSUSB_DLOAD) but couldn’t install any driver, so I disconnected it of the computer.
I couldn’t turn on the phone :crying:, I took the battery out and put it in and tried to start the phone and nothing happened, I tried pressing any button to access to recovery o download mode and none of this worked.
I started to search forums that talk about restart or turn on a brick AT&T S3 i747
I found one (http://forum.xda-developers.com/showthread.php?t=2549068) that said to download a image (debrick-SGH-I747U-CUEMJB3.img) and using the program “Win32DiskImager” to put the image inside of a micro SD to make the phone turn on,
I put the micro SD inside the phone and when I pushed the power button for almost 3 seconds it Turned on , the phone seems to be fine an it has android 4.3 (I747UCUEMJB) installed.
I can use it normally so far.
But the problem is that I can’t turn on the phone if the micro SD card is not inserted on the phone.
Without the micro SD inside don’t show any sign of life
When the micro SD is inside I can turn on the phone and use its apps.
I have tried to enter to Recovery mode or Download mode with the micro SD inside but the phone only show what its supposed to happen for 1 second then turns off and then turns on by its own (after that I can use it normally)
Does anyone know how can I Fix my phone ?
How can I boot my phone without using the micro SD card?
How can I access to download mode?
And if I could access to download mode what should I do next ?
The only files I have now are:
Odin3 v3.07
I747UCUEMJB_2024954_REV04_user_low_ship.tar.md5(905 Mb)
debrick-SGH-I747U-CUEMJB3.img (80 Mb)
BUMP
Maralex1520 said:
Hi I have (had) a AT&T galaxy S3 i747 with android 4.1.1 View attachment 2790296
Because the phone is in another country I couldn’t update it by OTA to android 4.3
So I started to read forums that said how to Update AT&T S3 i747 to android 4.3 (I747UCUEMJB)
The S3 was not Root
I installed all the phone drivers in the computer
This is what I did: (http://forum.xda-developers.com/showpost.php?p=52341582&postcount=38)
- Use Odin 3.07
- Check Auto Reboot and Re-Partition, and uncheck all the boxes
- I put my phone in USB debugging in the developer options
- I turned it off
- Started to put the phone on Download Mode pressing volume DW+home+power button at the same time View attachment 2790297View attachment 2790298
- In Odin on the PDA box I checked and loaded the file .tar.md5 (I747UCUEMJB_2024954_REV04_user_low_ship.tar.md5 )
- Pressed the button Start View attachment 2790299
The installation seemed to go right, the program never showed anything weird. View attachment 2790300
When the Programs finished the installation the phone turned off and then turned on and show the logo of android (seemed to be lying down or inclined) and after that it turned off.
The computer showed that something was connected (QHSUSB_DLOAD) but couldn’t install any driver, so I disconnected it of the computer.
I couldn’t turn on the phone :crying:, I took the battery out and put it in and tried to start the phone and nothing happened, I tried pressing any button to access to recovery o download mode and none of this worked.
I started to search forums that talk about restart or turn on a brick AT&T S3 i747
I found one (http://forum.xda-developers.com/showthread.php?t=2549068) that said to download a image (debrick-SGH-I747U-CUEMJB3.img) and using the program “Win32DiskImager” to put the image inside of a micro SD to make the phone turn on,
I put the micro SD inside the phone and when I pushed the power button for almost 3 seconds it Turned on , the phone seems to be fine an it has android 4.3 (I747UCUEMJB) installed.View attachment 2790301
I can use it normally so far.
But the problem is that I can’t turn on the phone if the micro SD card is not inserted on the phone.
Without the micro SD inside don’t show any sign of life
When the micro SD is inside I can turn on the phone and use its apps.
I have tried to enter to Recovery mode or Download mode with the micro SD inside but the phone only show what its supposed to happen for 1 second then turns off and then turns on by its own (after that I can use it normally)
Does anyone know how can I Fix my phone ?
How can I boot my phone without using the micro SD card?
How can I access to download mode?
And if I could access to download mode what should I do next ?
The only files I have now are:
Odin3 v3.07
I747UCUEMJB_2024954_REV04_user_low_ship.tar.md5(905 Mb)
debrick-SGH-I747U-CUEMJB3.img (80 Mb)
Click to expand...
Click to collapse
I'm in the same situation. Please if anyone could shed some light on the problem listed above.
Thanks in advance.
is thread still alive?.im having the same issue as op but when ever i flash a cwm or twrp recovery odin says pass and phone reboots to the same screen again..anybody have suggestion? my device is also i747
Flash cwm or twrp using Odin but don't check anything except f.reset time. When you see the word reset in the status window, disconnect USB cable, pull the battery, and boot into recovery.
no recovery still whatsoever..idk what my phone is up to..anything i try to flash with odin seems to fail except recovery..but even when it says pass it isnt installed?!.if i flash stock rom it says no pit partition but i already have the pit..curiously i noticed that my counter never increase..still 0 no matter how many times i flash cwm/twrp recovery..im not on 4.3 yet so im really freaked out..
Are you checking auto reboot in Odin when flashing recovery?
@audit13
Checked or unchecked yields same results..im smelling a fried emmc..might need board replacement..hard to find someone to replace emmc here in ph..
BUMP
Maralex1520 said:
Hi I have (had) a AT&T galaxy S3 i747 with android 4.1.1 View attachment 2790296
Because the phone is in another country I couldn’t update it by OTA to android 4.3
So I started to read forums that said how to Update AT&T S3 i747 to android 4.3 (I747UCUEMJB)
The S3 was not Root
I installed all the phone drivers in the computer
This is what I did: (http://forum.xda-developers.com/showpost.php?p=52341582&postcount=38)
- Use Odin 3.07
- Check Auto Reboot and Re-Partition, and uncheck all the boxes
- I put my phone in USB debugging in the developer options
- I turned it off
- Started to put the phone on Download Mode pressing volume DW+home+power button at the same time View attachment 2790297View attachment 2790298
- In Odin on the PDA box I checked and loaded the file .tar.md5 (I747UCUEMJB_2024954_REV04_user_low_ship.tar.md5 )
- Pressed the button Start View attachment 2790299
The installation seemed to go right, the program never showed anything weird. View attachment 2790300
When the Programs finished the installation the phone turned off and then turned on and show the logo of android (seemed to be lying down or inclined) and after that it turned off.
The computer showed that something was connected (QHSUSB_DLOAD) but couldn’t install any driver, so I disconnected it of the computer.
I couldn’t turn on the phone :crying:, I took the battery out and put it in and tried to start the phone and nothing happened, I tried pressing any button to access to recovery o download mode and none of this worked.
I started to search forums that talk about restart or turn on a brick AT&T S3 i747
I found one (http://forum.xda-developers.com/showthread.php?t=2549068) that said to download a image (debrick-SGH-I747U-CUEMJB3.img) and using the program “Win32DiskImager” to put the image inside of a micro SD to make the phone turn on,
I put the micro SD inside the phone and when I pushed the power button for almost 3 seconds it Turned on , the phone seems to be fine an it has android 4.3 (I747UCUEMJB) installed.View attachment 2790301
I can use it normally so far.
But the problem is that I can’t turn on the phone if the micro SD card is not inserted on the phone.
Without the micro SD inside don’t show any sign of life
When the micro SD is inside I can turn on the phone and use its apps.
I have tried to enter to Recovery mode or Download mode with the micro SD inside but the phone only show what its supposed to happen for 1 second then turns off and then turns on by its own (after that I can use it normally)
Does anyone know how can I Fix my phone ?
How can I boot my phone without using the micro SD card?
How can I access to download mode?
And if I could access to download mode what should I do next ?
The only files I have now are:
Odin3 v3.07
I747UCUEMJB_2024954_REV04_user_low_ship.tar.md5(905 Mb)
debrick-SGH-I747U-CUEMJB3.img (80 Mb)
Click to expand...
Click to collapse
peego said:
I'm in the same situation. Please if anyone could shed some light on the problem listed above.
Thanks in advance.
Click to expand...
Click to collapse
I'm also in this same situation. I revived my S3 from a long time being bricked so I can give it to my daughter and found myself in this same situation. It would only boot with the debrick sd card and won't boot into download mode. It would only stay for 1/2 a sec and then reboot. Has anyone been able to crack this? Thanks!
A tiny help
Hi, i have been really disconected of this.
Good and big bad news.
The good is could fix the phone, the bad is i dont remenber the procedure i did to fix it, i just searched in many forums, and tried many methods and downloaded some files that helped me to fix it. the only thing i remenber is i download a .rar that contain the android 4.3 for the samsung i747. Even though i dont remind what i did, hope this pictures of the files i used to recover the phone works for you.
if you find this files on the web, or when i have time to upload them hope they can help you.
sorry, but thats what a i call this a small and insignificant Help
vagosto said:
I'm also in this same situation. I revived my S3 from a long time being bricked so I can give it to my daughter and found myself in this same situation. It would only boot with the debrick sd card and won't boot into download mode. It would only stay for 1/2 a sec and then reboot. Has anyone been able to crack this? Thanks!
Click to expand...
Click to collapse
I have not had to use a debrick image myself. I have read where once you have the phone booted using a debrick image you can remove the card and replace it with one holding a ROM image which can then be flashed from a custom recovery. If you don't have a custom recovery installed you may be able to install the ROM with adb/fastboot after changing the cards. If this is not clear, there may be a better worded answer posted in one of the debrick threads.
Thanks. I already have the other sd card with the rom, kernel, etc. ready to flash but since I don't have custom recovery, I'm stuck. I remember seeing a thread mentioning about using adb/fastboot. I'll continue searching.
vagosto said:
Thanks. I already have the other sd card with the rom, kernel, etc. ready to flash but since I don't have custom recovery, I'm stuck. I remember seeing a thread mentioning about using adb/fastboot. I'll continue searching.
Click to expand...
Click to collapse
this may help.
http://forum.xda-developers.com/showthread.php?t=2225405
http://forum.xda-developers.com/showthread.php?t=2317790
"all i can really do , is stay out of my own way and let the will of heaven be done"
Great thanks!
your welcome :thumbup:
"all i can really do , is stay out of my own way and let the will of heaven be done"
Use this tutorial only with the Samsung Galaxy S4 ACTIVE shv-e470s smartphone.
CAUTION:THIS ROOTING METHOD IS ONLY FOR THE KOREAN VERSION SHV-E470S!!!
It was tested successfully on Samsung Galaxy S4 Active SHV-E470S Android version 4.2.2
Firmware version:E470SKSUANA1
Abstract:
Do not attempt to root any other smartphones with the files that you wil find in this articles.
This tutorial is destined to be used by advanced Android users.
I won’t be blamed in case you brick the phone or lose any data in the process!!!
Rooting the Galaxy S4 ACTIVE SHV-E470S will revoke its warranty. If you want to restore your phone's warranty then you will need to flash an official Samsung Android ROM OS.
Pre-requisites :
Download and install the Samsung USB Drivers on your computer
Disable Samsung KIES program if you have it installed on your computer
Disable any antivirus applications from running on your computer
Enable USB Debugging from Developer Options.
If Developer Options doesn’t appear in Settings, then you need to enable it.
go to Settings, then More, open About Device.
tap seven times on the Build Number.
you will now be enabling Developer Option, go back to main Settings section, scroll down and enable USB Debugging
Check your phone’s battery and make sure that there is at least 50% left before the device switches off
Read the entire post, don’t skip any steps and the guide should be completed in under ten minutes with success.
In case you have trouble completing the guide, then you are free to ask for extra help in comments
Download required files (see attachments)
Odin3 1.85
UPDATE-SuperSU-v1.93
unofficial_philz_touch_6.12.8-e470s
Process:
1. Copy the "UPDATE-SuperSU-v1.93.zip" into your phone internal or external memory
2. Extract the contents of the Odin zip file and place them on your computer’s desktop screen.
3. Power off the Galaxy S4 active shv-e470s now.
4. After that you have to boot the device in Android Download Mode (press and hold: volume down,home and power buttons}
5. Launch Odin on your PC as administrator
6. Connect the phone with your computer via USB cable.(make sure antivirus+firewall is now disabled!!)
7. Wait for ODIN to detect your device,(you should see the "added" message) then continue to the next step.
8. If the phone is not recognized by your PC, then you should re-install the Samsung USB Drivers.
9. Go to ODIN’s main window, click on PDA and then find the "unofficial_philz_touch_6.12.8-e470s.tar" Load it in ODIN.
10. Do not change any other Odin default settings
11. Make sure that the Re-Partition option is not enabled
12. When ready, hit the START button for the process to begin.
13. Don’t press any buttons until the process is complete
14. When ODIN completes the process it will show the PASS alert, then the phone will reboot in normal mode. You can unplug the device from PC when the Samsung Galaxy S4 active shv-e470s boot animation screen loads.
15. Now power off your phone again and boot in recovery mode (press and hold: volume up,home and power buttons)
16. Once in recovery mode,find and install the "UPDATE-SuperSU-v1.93.zip" .To do this,in the recovery menu choose the "install zip" option and then find the directory u have saved the zip file and choose it for installing.
17. Wait for the process to finish and then ur phone will reboot.once reboot u can download "root checker" from play store and verify that u have root access.
18. Have fun and enjoy your rooted SHV-E470s
Did anyone try with E470SKSUAND1 yet?
story said:
Did anyone try with E470SKSUAND1 yet?
Click to expand...
Click to collapse
I tried and it works.
req new download links
The download links has expired . please give me another links.thx
This phone is update to 4.4.2. Are we can't root our phone such as #1?
new files
nickserbanoiu said:
The download links has expired . please give me another links.thx
Click to expand...
Click to collapse
hello my friend....i just renewed the files.
Thanks you !
how about 4.4.2 root, can we use this tool to root?
story said:
I tried and it works.
Click to expand...
Click to collapse
Hi, I also have E470SKSUAND1, but my recovery mode only shows me 4 or 5 options, no install zip option. I looked for the cwm but the shv e470s isn´t supportet yet. How did you do it?
Hi, I need pit file for this phone or 2gb system dump. Pls help me. My phone is brick now.
shv-e470s
Thanh_GSM said:
Hi, I need pit file for this phone or 2gb system dump. Pls help me. My phone is brick now.
Click to expand...
Click to collapse
Bro!! did you repair your shv-e470s boot-loader ?
i have hard bricked my shv-e470s any help?
Does anyone try on E470SKSUCOE1? (lollipop 5.0.1)
Bump for lollipop E470SKSUCOH1 rooting...
Hi, I downgrade my Samsung Galaxy S4 Active (SHV-E470s) from Android 4.4.2 kitkat to Android 4.2.2 JellyBean, Odin says "PASS", it means i successfully flash the 4.2.2 jellybean firmware, then I try to reboot my phone, nothing happens, It won't turn on, I try to charge it but no response, no vibration, it is like completely dead, It is Hard brick? How can I unbrick and revive it? Thank you.
the most popular way on net to root note3 neo is
"Download and extract Odin to any folder on desktop or anywhere.
Now extract CF-Auto-Root-hl3g-hl3gub-smn750.zip file and you will get a CF-Auto-Root-hl3g-hl3gub-smn750.tar.md5 file.
Run Odin3 v3.09.exe as Administrator. Just right click on the file and select Run as administrator.
urn off your Samsung Galaxy Note 3 and wait for few seconds to turn it on.
Press and hold Volume down and home buttons for sometime. After 2 seconds press and hold power button too. You will see a warning message. Press Volume UP button to boot in Download mode from where we will flash CF-Auto-Root tool.
Connect your device with USB and wait for a few seconds. In the message box which is in the bottom left, you will see a message Added!! If you didn't get the message, then please install USB Drivers from here.
In the section of AP, just select the CF-Auto-Root-hl3g-hl3gub-smn750.tar.md5 file.
Make sure that Auto Reboot and F. Reset Time are the only boxes which are selected. If any other box is selected, please un-select it.
Hit the Start button to root your device and flash it.
You will see a PASS message in the message box and your device will be rebooted automatically."
n it doesnt work
rather it just stop at 30 percent & brick it
please give a actual root procedure that work for indian note 3 neo
ill b really thankful
i live in india n build no. is N750XXUANB3
please help
leok810i said:
the most popular way on net to root note3 neo is
"Download and extract Odin to any folder on desktop or anywhere.
Now extract CF-Auto-Root-hl3g-hl3gub-smn750.zip file and you will get a CF-Auto-Root-hl3g-hl3gub-smn750.tar.md5 file.
Run Odin3 v3.09.exe as Administrator. Just right click on the file and select Run as administrator.
urn off your Samsung Galaxy Note 3 and wait for few seconds to turn it on.
Press and hold Volume down and home buttons for sometime. After 2 seconds press and hold power button too. You will see a warning message. Press Volume UP button to boot in Download mode from where we will flash CF-Auto-Root tool.
Connect your device with USB and wait for a few seconds. In the message box which is in the bottom left, you will see a message Added!! If you didn't get the message, then please install USB Drivers from here.
In the section of AP, just select the CF-Auto-Root-hl3g-hl3gub-smn750.tar.md5 file.
Make sure that Auto Reboot and F. Reset Time are the only boxes which are selected. If any other box is selected, please un-select it.
Hit the Start button to root your device and flash it.
You will see a PASS message in the message box and your device will be rebooted automatically."
n it doesnt work
rather it just stop at 30 percent & brick it
please give a actual root procedure that work for indian note 3 neo
ill b really thankful
i live in india n build no. is N750XXUANB3
please help
Click to expand...
Click to collapse
your phone brick?
flash your stock firmware first the try it again.
leok810i said:
the most popular way on net to root note3 neo is
"Download and extract Odin to any folder on desktop or anywhere.
Now extract CF-Auto-Root-hl3g-hl3gub-smn750.zip file and you will get a CF-Auto-Root-hl3g-hl3gub-smn750.tar.md5 file.
Run Odin3 v3.09.exe as Administrator. Just right click on the file and select Run as administrator.
urn off your Samsung Galaxy Note 3 and wait for few seconds to turn it on.
Press and hold Volume down and home buttons for sometime. After 2 seconds press and hold power button too. You will see a warning message. Press Volume UP button to boot in Download mode from where we will flash CF-Auto-Root tool.
Connect your device with USB and wait for a few seconds. In the message box which is in the bottom left, you will see a message Added!! If you didn't get the message, then please install USB Drivers from here.
In the section of AP, just select the CF-Auto-Root-hl3g-hl3gub-smn750.tar.md5 file.
Make sure that Auto Reboot and F. Reset Time are the only boxes which are selected. If any other box is selected, please un-select it.
Hit the Start button to root your device and flash it.
You will see a PASS message in the message box and your device will be rebooted automatically."
n it doesnt work
rather it just stop at 30 percent & brick it
please give a actual root procedure that work for indian note 3 neo
ill b really thankful
i live in india n build no. is N750XXUANB3
please help
Click to expand...
Click to collapse
ikw d fix 4 it... do 1 thing remove ur battery... go to download mode 1st without connecting usb cable... when it will say press vol up to cont b4 press vol up insert the usb cable tn press vol up u will c that the com port will come without fail and if it still.fails tn fry check out ur driver pack or try flash it using linux OS like ubntu try it
Sent from my SM-N750 using XDA Premium 4 mobile app
klaud004 said:
your phone brick?
flash your stock firmware first the try it again.
Click to expand...
Click to collapse
yes i brick my phone
but got it fixed by company
but need A root procedure that work
sgatechwork said:
ikw d fix 4 it... do 1 thing remove ur battery... go to download mode 1st without connecting usb cable... when it will say press vol up to cont b4 press vol up insert the usb cable tn press vol up u will c that the com port will come without fail and if it still.fails tn fry check out ur driver pack or try flash it using linux OS like ubntu try it
Sent from my SM-N750 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
hi,
company fixed y mobile but go kexc counter to 1 so i dont think so they'll do t next time
i only have window 7 os
i think i have driver issue
so if u can please upload the driver & odin u used to root ur note3 neo, it'll be of great help
n please give the step by step procedure to root
i m a total noob for samsung device
leok810i said:
hi,
company fixed y mobile but go kexc counter to 1 so i dont think so they'll do t next time
i only have window 7 os
i think i have driver issue
so if u can please upload the driver & odin u used to root ur note3 neo, it'll be of great help
n please give the step by step procedure to root
i m a total noob for samsung device
Click to expand...
Click to collapse
give me the variant of ur note 3 neo first.
leok810i said:
hi,
company fixed y mobile but go kexc counter to 1 so i dont think so they'll do t next time
i only have window 7 os
i think i have driver issue
so if u can please upload the driver & odin u used to root ur note3 neo, it'll be of great help
n please give the step by step procedure to root
i m a total noob for samsung device
Click to expand...
Click to collapse
ya i will PM u
Sent from my SM-N750 using XDA Premium 4 mobile app
klaud004 said:
give me the variant of ur note 3 neo first.
Click to expand...
Click to collapse
build no. is N750XXUANB3
baseband version N750DDUANA5
android version 4.3
i have attached an screenshot of info
leok810i said:
build no. is N750XXUANB3
baseband version N750DDUANA5
android version 4.3
i have attached an screenshot of info
Click to expand...
Click to collapse
can u download a cpu z then take a screenshot.so we know wich chipset u have.
klaud004 said:
can u download a cpu z then take a screenshot.so we know wich chipset u have.
Click to expand...
Click to collapse
hi
i have attached the snapshots
leok810i said:
hi
i have attached the snapshots
Click to expand...
Click to collapse
ok you have the hexacore.
first you install the driver in your pc
then run odin as administrator.click pda.then choose sm-n750 tar file in your pc.
turn on usb debugging in you note3 neo.then powerdown your phone.now boot youre phone in download mode.
by pressing volune down.home button and power.
now conect youre phone into pc then wait till a blue color appear in the small box in the upper left of odin saying id: com(dont know if i remember that corectly)if not.try another usb port.
if its blue then click start.utill you see succes.
download http://goo.gl/zEeQcr
I have SM-N750 with the same SOC and spec with your phone. It is using in Vietnam and rooted by the file: https://mega.co.nz/#!KccSnQwZ!C_kb6flVTrO5s0EyLNO_1Dx8m9XO-9_B3X_8-lMvVvs
It was rooted ok (use ODIN 3.0.7 or 3.0.9 and PDA button to choose the file). Unfortunatelly it has not any stable recovery up to now.
Note: If you connect to the laptop or PC first then start ODIN, ODIN must show the "added!" message. If not, trying to install Samsung mobile driver or/and Kies 2. Besides, download mode may be turn off and turn on again.