Develop Bugs

[req]can it run[req]

About one month i bricked my phone , so i installed cyanogenmod 7 , so i was wondering can i re install the stock rom
i searched and the answer was something about odin so plz can somebody explain the procedure and can it work ???

hubix said:
Hey guys,
in this tutorial I will show you how to upgrade and root your Samsung Galaxy Ace S5830. This method is the simplest way to do it.
Shall not be liable for any resulting damage to your phone! Everything you do at your own risk!
if you don't understand what is root, ROM, phone, flash, CMD etc. watch this movie: http://www.youtube.com/watch?v=JmvCpR45LKA
You will need (most files are available below this post):
- PC with Windows XP SP2 or later
- .Net Framework 2.0 or later (x86: http://www.microsoft.com/download/en/details.aspx?id=19 x64: http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=6523)
- Samsung Galaxy Ace GT-S5830
- USB to Micro-USB cable
- ODIN 4.38 (here: http://www.multiupload.com/MUBOZPEOS3)
- OPS file (You must be registered to download: http://www.samfirmware.com/WEBPROTECT-s5830.htm)
C. Flashing the newest firmware:
1) Turn off your phone
2) Remove your SIM Card and SD Card
3) Extract previously downloaded firmware
4) Open ODIN 4.38 on your PC
5) Select from extracted archive: OPS-OPS, Boot-APBOOT, Phone-MODEM, PDA-CODE, CSC-CSC (leave EFS and One Package empty)
6) Connect your phone via USB into PC
7) When the screen is turned on hold POWER+VOLUME DOWN+HOME and wait until the phone enters the Download Mode
8) If ODIN detected and recognised your phone should light up the first square to the left side
9) Press "Start" button and wait, the process should take ~5 minutes
10) If all goes well your phone should reboot automatically
11) Square should change the color to blue and display "PASS" it means that flashing process was successful and we have the newest firmware
12) Disconnect your phone
13) Turn off your phone
14) Insert your SIM Card and SD Card again
15) Turn on your phone
16) Now you have the newest firmware!
Click to expand...
Click to collapse
Use http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-S5830&r=-1#modelsa for the latest firmware.
Please use search before posting, there are already tutorials on using Odin.
Yes, it works!

[Q] pls answer me ASAP urgentlyyyyyyyyyy !!

hello ,,
pls i have t-mobile galaxy s3 and its screen has broken :S and turned into black but the device still working ,, so i need to delete all my data from it cos im gonna change it by warranty !! so please help me to delete all my files without root !!
thanks in advance guys

Can you see anything on screen or just black ??

bikrame said:
Can you see anything on screen or just black ??
Click to expand...
Click to collapse
no just black

Do u have any hdmi output cable ?

bikrame said:
Can you see anything on screen or just black ??
Click to expand...
Click to collapse
bikrame said:
Do u have any hdmi output cable ?
Click to expand...
Click to collapse
what's hdmi cable ??

Its a cable to join phon with tv or laptop where you can view your phone screen on tv.
I dont think there is any option left for you then. Becoz for alll process you need to see whats on ur screen and u say your screen is all blank.
Sorry man

Find out if your TV support HDMI port...if it does and you are willing to cough up few bucks, get this to connect it
http://www.amazon.com/Skiva-Samsung...403295&sr=8-3&keywords=hdmi+samsung+galaxy+s3

**** !!
so what if i installed a new rom via odin ?

You can install a stock ROM through Odin. Only thing is that the only way you will see it has properly connected in Download mode is throuhg the Com: box in Odin and you probably won't know if it boots up or not.
Couple of things.
Try to get an HDMI cable from a friend or something and use the TV as a monitor.
What recovery are you using? You might be able to get someone to walk you through some screen clicks (that is if your screen even registers the touches) to wipe /data (either through recovery or through Settings>Security>Factory Reset) or even /mounts and pull off through your PC that way.
Best bet is to get an HDMI cable and then once you have your new phone, you'll have all the wonders that the cable provides on a fully functioning phone.
You could always pull the internal SD from ADB and wipe through that avenue as well.

while in recovery on cwm touch, I'm almost positive that volume rockers and power button still react to clicks

Woody said:
You can install a stock ROM through Odin. Only thing is that the only way you will see it has properly connected in Download mode is throuhg the Com: box in Odin and you probably won't know if it boots up or not.
Couple of things.
Try to get an HDMI cable from a friend or something and use the TV as a monitor.
What recovery are you using? You might be able to get someone to walk you through some screen clicks (that is if your screen even registers the touches) to wipe /data (either through recovery or through Settings>Security>Factory Reset) or even /mounts and pull off through your PC that way.
Best bet is to get an HDMI cable and then once you have your new phone, you'll have all the wonders that the cable provides on a fully functioning phone.
You could always pull the internal SD from ADB and wipe through that avenue as well.
Click to expand...
Click to collapse
thanks alot ,, but could you please tell me where could i find stock Rom for it !! and tell me all steps to do it cause i dont have much info about android

Use odin I guarantee thats the best bet .
Do this pull battery, then put it back in.
Hold home button first then volume down and power at same time for 6seconds after right after 6 seconds release all buttons at once then immediately press vol up for half a second
Now the test to see if its in download mode connect to Odin plug usb into pc if u see "com" in one of the ports you are good to flash the stock tar file in the Pda section only
Remember to follow the steps they are timed as I have tested the time it takes to boot into download mode
First download the following files on your pc in order .Here is the files first is odin which is the tool to flash to stock. Extract it to a desktop folder named odin .Next is the usb drivers download and install and next and last is the actual firmware .tar file to flash in odin And only select pda section then find file and click start when says pass/reset its complete
1# http://hotfile.com/dl/161620048/6c6d559/Odin3_v3.07.rar.html
2# http://hotfile.com/dl/167907224/256bf74/T-Mobile_T999_GSIII_Samsung_USB_Driver_v1_4_6_0.exe.html
3# http://hotfile.com/dl/179539523/d0bd79a/SGH-T999_TMB_T999UVDLJA_T999TMBDLJA_Original.zip.html
Sent from my SGH-T999 using xda app-developers app

lojak29 said:
Use odin I guarantee thats the best bet .
Do this pull battery, then put it back in.
Hold home button first then volume down and power at same time for 6seconds after right after 6 seconds release all buttons at once then immediately press vol up for half a second
Now the test to see if its in download mode connect to Odin plug usb into pc if u see "com" in one of the ports you are good to flash the stock tar file in the Pda section only
Remember to follow the steps they are timed as I have tested the time it takes to boot into download mode
First download the following files on your pc in order .Here is the files first is odin which is the tool to flash to stock. Extract it to a desktop folder named odin .Next is the usb drivers download and install and next and last is the actual firmware .tar file to flash in odin And only select pda section then find file and click start when says pass/reset its complete
1# http://hotfile.com/dl/161620048/6c6d559/Odin3_v3.07.rar.html
2# http://hotfile.com/dl/167907224/256bf74/T-Mobile_T999_GSIII_Samsung_USB_Driver_v1_4_6_0.exe.html
3# http://hotfile.com/dl/179539523/d0bd79a/SGH-T999_TMB_T999UVDLJA_T999TMBDLJA_Original.zip.html
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
thanksssss so much for ur help
i will try it and hope it work :good:

Samsung Galaxy S4 ACTIVE shv-e470s Rooting Guide

Use this tutorial only with the Samsung Galaxy S4 ACTIVE shv-e470s smartphone.
CAUTION:THIS ROOTING METHOD IS ONLY FOR THE KOREAN VERSION SHV-E470S!!!
It was tested successfully on Samsung Galaxy S4 Active SHV-E470S Android version 4.2.2
Firmware version:E470SKSUANA1
Abstract:
Do not attempt to root any other smartphones with the files that you wil find in this articles.
This tutorial is destined to be used by advanced Android users.
I won’t be blamed in case you brick the phone or lose any data in the process!!!
Rooting the Galaxy S4 ACTIVE SHV-E470S will revoke its warranty. If you want to restore your phone's warranty then you will need to flash an official Samsung Android ROM OS.
Pre-requisites :
Download and install the Samsung USB Drivers on your computer
Disable Samsung KIES program if you have it installed on your computer
Disable any antivirus applications from running on your computer
Enable USB Debugging from Developer Options.
If Developer Options doesn’t appear in Settings, then you need to enable it.
go to Settings, then More, open About Device.
tap seven times on the Build Number.
you will now be enabling Developer Option, go back to main Settings section, scroll down and enable USB Debugging
Check your phone’s battery and make sure that there is at least 50% left before the device switches off
Read the entire post, don’t skip any steps and the guide should be completed in under ten minutes with success.
In case you have trouble completing the guide, then you are free to ask for extra help in comments
Download required files (see attachments)
Odin3 1.85
UPDATE-SuperSU-v1.93
unofficial_philz_touch_6.12.8-e470s
Process:
1. Copy the "UPDATE-SuperSU-v1.93.zip" into your phone internal or external memory
2. Extract the contents of the Odin zip file and place them on your computer’s desktop screen.
3. Power off the Galaxy S4 active shv-e470s now.
4. After that you have to boot the device in Android Download Mode (press and hold: volume down,home and power buttons}
5. Launch Odin on your PC as administrator
6. Connect the phone with your computer via USB cable.(make sure antivirus+firewall is now disabled!!)
7. Wait for ODIN to detect your device,(you should see the "added" message) then continue to the next step.
8. If the phone is not recognized by your PC, then you should re-install the Samsung USB Drivers.
9. Go to ODIN’s main window, click on PDA and then find the "unofficial_philz_touch_6.12.8-e470s.tar" Load it in ODIN.
10. Do not change any other Odin default settings
11. Make sure that the Re-Partition option is not enabled
12. When ready, hit the START button for the process to begin.
13. Don’t press any buttons until the process is complete
14. When ODIN completes the process it will show the PASS alert, then the phone will reboot in normal mode. You can unplug the device from PC when the Samsung Galaxy S4 active shv-e470s boot animation screen loads.
15. Now power off your phone again and boot in recovery mode (press and hold: volume up,home and power buttons)
16. Once in recovery mode,find and install the "UPDATE-SuperSU-v1.93.zip" .To do this,in the recovery menu choose the "install zip" option and then find the directory u have saved the zip file and choose it for installing.
17. Wait for the process to finish and then ur phone will reboot.once reboot u can download "root checker" from play store and verify that u have root access.
18. Have fun and enjoy your rooted SHV-E470s

Did anyone try with E470SKSUAND1 yet?

story said:
Did anyone try with E470SKSUAND1 yet?
Click to expand...
Click to collapse
I tried and it works.

req new download links
The download links has expired . please give me another links.thx

This phone is update to 4.4.2. Are we can't root our phone such as #1?

new files
nickserbanoiu said:
The download links has expired . please give me another links.thx
Click to expand...
Click to collapse
hello my friend....i just renewed the files.

Thanks you !
how about 4.4.2 root, can we use this tool to root?

story said:
I tried and it works.
Click to expand...
Click to collapse
Hi, I also have E470SKSUAND1, but my recovery mode only shows me 4 or 5 options, no install zip option. I looked for the cwm but the shv e470s isn´t supportet yet. How did you do it?

Hi, I need pit file for this phone or 2gb system dump. Pls help me. My phone is brick now.

shv-e470s
Thanh_GSM said:
Hi, I need pit file for this phone or 2gb system dump. Pls help me. My phone is brick now.
Click to expand...
Click to collapse
Bro!! did you repair your shv-e470s boot-loader ?
i have hard bricked my shv-e470s any help?

Does anyone try on E470SKSUCOE1? (lollipop 5.0.1)

Bump for lollipop E470SKSUCOH1 rooting...

Hi, I downgrade my Samsung Galaxy S4 Active (SHV-E470s) from Android 4.4.2 kitkat to Android 4.2.2 JellyBean, Odin says "PASS", it means i successfully flash the 4.2.2 jellybean firmware, then I try to reboot my phone, nothing happens, It won't turn on, I try to charge it but no response, no vibration, it is like completely dead, It is Hard brick? How can I unbrick and revive it? Thank you.

no way to root indian note3 neo, please help

the most popular way on net to root note3 neo is
"Download and extract Odin to any folder on desktop or anywhere.
Now extract CF-Auto-Root-hl3g-hl3gub-smn750.zip file and you will get a CF-Auto-Root-hl3g-hl3gub-smn750.tar.md5 file.
Run Odin3 v3.09.exe as Administrator. Just right click on the file and select Run as administrator.
urn off your Samsung Galaxy Note 3 and wait for few seconds to turn it on.
Press and hold Volume down and home buttons for sometime. After 2 seconds press and hold power button too. You will see a warning message. Press Volume UP button to boot in Download mode from where we will flash CF-Auto-Root tool.
Connect your device with USB and wait for a few seconds. In the message box which is in the bottom left, you will see a message Added!! If you didn't get the message, then please install USB Drivers from here.
In the section of AP, just select the CF-Auto-Root-hl3g-hl3gub-smn750.tar.md5 file.
Make sure that Auto Reboot and F. Reset Time are the only boxes which are selected. If any other box is selected, please un-select it.
Hit the Start button to root your device and flash it.
You will see a PASS message in the message box and your device will be rebooted automatically.​"
n it doesnt work
rather it just stop at 30 percent & brick it
please give a actual root procedure that work for indian note 3 neo
ill b really thankful
i live in india n build no. is N750XXUANB3
please help

leok810i said:
the most popular way on net to root note3 neo is
"Download and extract Odin to any folder on desktop or anywhere.
Now extract CF-Auto-Root-hl3g-hl3gub-smn750.zip file and you will get a CF-Auto-Root-hl3g-hl3gub-smn750.tar.md5 file.
Run Odin3 v3.09.exe as Administrator. Just right click on the file and select Run as administrator.
urn off your Samsung Galaxy Note 3 and wait for few seconds to turn it on.
Press and hold Volume down and home buttons for sometime. After 2 seconds press and hold power button too. You will see a warning message. Press Volume UP button to boot in Download mode from where we will flash CF-Auto-Root tool.
Connect your device with USB and wait for a few seconds. In the message box which is in the bottom left, you will see a message Added!! If you didn't get the message, then please install USB Drivers from here.
In the section of AP, just select the CF-Auto-Root-hl3g-hl3gub-smn750.tar.md5 file.
Make sure that Auto Reboot and F. Reset Time are the only boxes which are selected. If any other box is selected, please un-select it.
Hit the Start button to root your device and flash it.
You will see a PASS message in the message box and your device will be rebooted automatically.​"
n it doesnt work
rather it just stop at 30 percent & brick it
please give a actual root procedure that work for indian note 3 neo
ill b really thankful
i live in india n build no. is N750XXUANB3
please help
Click to expand...
Click to collapse
your phone brick?
flash your stock firmware first the try it again.

leok810i said:
the most popular way on net to root note3 neo is
"Download and extract Odin to any folder on desktop or anywhere.
Now extract CF-Auto-Root-hl3g-hl3gub-smn750.zip file and you will get a CF-Auto-Root-hl3g-hl3gub-smn750.tar.md5 file.
Run Odin3 v3.09.exe as Administrator. Just right click on the file and select Run as administrator.
urn off your Samsung Galaxy Note 3 and wait for few seconds to turn it on.
Press and hold Volume down and home buttons for sometime. After 2 seconds press and hold power button too. You will see a warning message. Press Volume UP button to boot in Download mode from where we will flash CF-Auto-Root tool.
Connect your device with USB and wait for a few seconds. In the message box which is in the bottom left, you will see a message Added!! If you didn't get the message, then please install USB Drivers from here.
In the section of AP, just select the CF-Auto-Root-hl3g-hl3gub-smn750.tar.md5 file.
Make sure that Auto Reboot and F. Reset Time are the only boxes which are selected. If any other box is selected, please un-select it.
Hit the Start button to root your device and flash it.
You will see a PASS message in the message box and your device will be rebooted automatically.​"
n it doesnt work
rather it just stop at 30 percent & brick it
please give a actual root procedure that work for indian note 3 neo
ill b really thankful
i live in india n build no. is N750XXUANB3
please help
Click to expand...
Click to collapse
ikw d fix 4 it... do 1 thing remove ur battery... go to download mode 1st without connecting usb cable... when it will say press vol up to cont b4 press vol up insert the usb cable tn press vol up u will c that the com port will come without fail and if it still.fails tn fry check out ur driver pack or try flash it using linux OS like ubntu try it
Sent from my SM-N750 using XDA Premium 4 mobile app

klaud004 said:
your phone brick?
flash your stock firmware first the try it again.
Click to expand...
Click to collapse
yes i brick my phone
but got it fixed by company
but need A root procedure that work

sgatechwork said:
ikw d fix 4 it... do 1 thing remove ur battery... go to download mode 1st without connecting usb cable... when it will say press vol up to cont b4 press vol up insert the usb cable tn press vol up u will c that the com port will come without fail and if it still.fails tn fry check out ur driver pack or try flash it using linux OS like ubntu try it
Sent from my SM-N750 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
hi,
company fixed y mobile but go kexc counter to 1 so i dont think so they'll do t next time
i only have window 7 os
i think i have driver issue
so if u can please upload the driver & odin u used to root ur note3 neo, it'll be of great help
n please give the step by step procedure to root
i m a total noob for samsung device

leok810i said:
hi,
company fixed y mobile but go kexc counter to 1 so i dont think so they'll do t next time
i only have window 7 os
i think i have driver issue
so if u can please upload the driver & odin u used to root ur note3 neo, it'll be of great help
n please give the step by step procedure to root
i m a total noob for samsung device
Click to expand...
Click to collapse
give me the variant of ur note 3 neo first.

leok810i said:
hi,
company fixed y mobile but go kexc counter to 1 so i dont think so they'll do t next time
i only have window 7 os
i think i have driver issue
so if u can please upload the driver & odin u used to root ur note3 neo, it'll be of great help
n please give the step by step procedure to root
i m a total noob for samsung device
Click to expand...
Click to collapse
ya i will PM u
Sent from my SM-N750 using XDA Premium 4 mobile app

klaud004 said:
give me the variant of ur note 3 neo first.
Click to expand...
Click to collapse
build no. is N750XXUANB3
baseband version N750DDUANA5
android version 4.3
i have attached an screenshot of info

leok810i said:
build no. is N750XXUANB3
baseband version N750DDUANA5
android version 4.3
i have attached an screenshot of info
Click to expand...
Click to collapse
can u download a cpu z then take a screenshot.so we know wich chipset u have.

klaud004 said:
can u download a cpu z then take a screenshot.so we know wich chipset u have.
Click to expand...
Click to collapse
hi
i have attached the snapshots

leok810i said:
hi
i have attached the snapshots
Click to expand...
Click to collapse
ok you have the hexacore.
first you install the driver in your pc
then run odin as administrator.click pda.then choose sm-n750 tar file in your pc.
turn on usb debugging in you note3 neo.then powerdown your phone.now boot youre phone in download mode.
by pressing volune down.home button and power.
now conect youre phone into pc then wait till a blue color appear in the small box in the upper left of odin saying id: com(dont know if i remember that corectly)if not.try another usb port.
if its blue then click start.utill you see succes.
download http://goo.gl/zEeQcr

I have SM-N750 with the same SOC and spec with your phone. It is using in Vietnam and rooted by the file: https://mega.co.nz/#!KccSnQwZ!C_kb6flVTrO5s0EyLNO_1Dx8m9XO-9_B3X_8-lMvVvs
It was rooted ok (use ODIN 3.0.7 or 3.0.9 and PDA button to choose the file). Unfortunatelly it has not any stable recovery up to now.
Note: If you connect to the laptop or PC first then start ODIN, ODIN must show the "added!" message. If not, trying to install Samsung mobile driver or/and Kies 2. Besides, download mode may be turn off and turn on again.

[Q] Wont enter download mode! Phone stuck in boot loop.

After downloading the new AT&T update yesterday my phone (No root) went thru the update process and completed and then restarted itself and ever since then has been stuck in a boot loop on the LG logo screen. Was going to do the flashing procedure but when I try to boot the phone in download mode the little box appears saying "download mode" but instead of the "firmware update" screen appearing shortly after that my screen just goes black again. Have tried every port using the stock chord on my computer (Windows 8.1, USB 3.0) and have tried every port on another computer (Windows 7, USB 2.0) and still the same thing every time. Have installed the proper LG drivers on both computers but still fails to recognize the phone correctly under device manager as well.
ANY HELP IS MUCH APPRECIATED!

Update to lollipop? Wow sorry to hear that OP. Did you pull out the battery? Sometimes that helps strangely.

squall458 said:
Update to lollipop? Wow sorry to hear that OP. Did you pull out the battery? Sometimes that helps strangely.
Click to expand...
Click to collapse
Update to lolipop went fine it was this update that enables VoLTE that screwed it up. I cant post link because I am a new member but google it and you will find it.
But yes pulled the battery out first to end the boot loop and thats where the original post picks up from.

Sometimes to get into Download Mode:
Remove Battery.
Press Volume Up.
While still pressing Volume Up, replace Battery.
Still pressing Volume Up, connect to p.c. by USB Cable. Phone should now enter Download Mode......

jac10000 said:
Sometimes to get into Download Mode:
Remove Battery.
Press Volume Up.
While still pressing Volume Up, replace Battery.
Still pressing Volume Up, connect to p.c. by USB Cable. Phone should now enter Download Mode......
Click to expand...
Click to collapse
Thanks for the tip but still the same outcome.

craincrizzy said:
Thanks for the tip but still the same outcome.
Click to expand...
Click to collapse
How is it recognized in dvice manger on your computer. USB port ? COM port ?

jac10000 said:
How is it recognized in dvice manger on your computer. USB port ? COM port ?
Click to expand...
Click to collapse
Shows up under other devices as "QHSUSB_BULK"

craincrizzy said:
Shows up under other devices as "QHSUSB_BULK"
Click to expand...
Click to collapse
Ok your G3 is brick, you can try that : http://forum.xda-developers.com/lg-g2/general/tool-unbrick-lg-g2-qualcomm-9008-board-t3072073

Thank you so much for pointing me to that program! Worked like a charm.
Sent from my LG-D850 using XDA Free mobile app

craincrizzy, I am having the same issue with my LG G3 D850. Device manager shows QHUSB_bulk. What steps did you take to get your issue resolve?

I'm at work right now but once I'm home I will give you a step by step.
Sent from my LG-D850 using XDA Free mobile app

craincrizzy said:
I'm at work right now but once I'm home I will give you a step by step.
Sent from my LG-D850 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks man, I will wait for you.
What driver do you use?
I have conecct a pin of the micro to the ground (how I read) and no more HQSUBS, now Windows detect a unknow device USB.

phillye said:
craincrizzy, I am having the same issue with my LG G3 D850. Device manager shows QHUSB_bulk. What steps did you take to get your issue resolve?
Click to expand...
Click to collapse
Before I even start just gonna let you know you have to flash the phone back to the stock firmware meaning you will lose anything saved on your phone but this is the only way to get it back functional.
Pre-requirements
1. Stock LG cord that came with phone
2. Desktop computer with USB 2.0 ports (3.0 wouldnt work for me)
3. Disable driver signature enforcement (Depends on OS as to how to do this so just google it. Takes just a few minutes)
*UNPLUG PHONE BEFORE STARTING*
1. Download and install the QDLoader HS-USB Driver here: http://www.androidbrick.com/download/qdloader-hs-usb-driver/
2. Plug your phone in while holding volume up to initiate "Download Mode" and it should now show up under "Ports" as "Qualcomm HS-USB QDLoader 9008"
3. Download and extract this: https://www.drive.google.com/file/d/0B_Hol5T47S-bYjNETmVPZkdWUms/view
4. Now download the stock fimware files (the .zip and .dll files) here: http://downloadandroidfiles.org/directory-php/?Directory=/LG%20G3/Stock%20Files/ATT%20D850
5. Extract the .tot file out of the .zip file and place it and your .dll file on your desktop.
6. Now open (be sure to right click and run as administrator!) BoardDiag which is located in the BoardDiag_V2_9 folder you downloaded in step 3.
7. If you need pictures to follow along with the next few steps go here: http://forum.xda-developers.com/lg-g2/general/tool-unbrick-lg-g2-qualcomm-9008-board-t3072073 and see the Attached Thumbnails at the bottom of the first post.
7. At the bottom under "Image Extraction" place the .tot file in the BIN field and make the DIR wherever you wish the files to be extracted to and then hit "Extract" and wait for process to finish.
8. Now under "Board Diag Test" check the boxes beside "AP check" and "EMMC TEST"
9. In the right column make sure "B2 (MSM8974AC)" is selected in dropdown "AP Chipset"
10. On the "Com Port" dropdown select the COM number your device shows up with in Device Manager.
11. In the "Target Dir" type the destination where you extracted the .tot file to in Step 7.
12. Click "START" and wait for process to finish. If the test passes the AP check and the EMMC TEST then you're good to go. If not then im afraid you have a hard brick and I cant help you there.
13. Uncheck "EMMC TEST" and check "RESTORE BOOT IMG" under "Restore Device"
14. In the dropdown beside "RESTORE BOOT IMG" choose the following in the order typed and hit "START" after choosing each file letting it flash the stock file to your phone: aboot--Backupgpt--boot--dbi--laf--Primarygpt--recovery--rpm--tz--sbl1
15. Your phone should now have the LG logo and underneath that say "Security Error".
16. Unplug your phone and pop your battery out and back in. Now plug your phone in while holding volume up for "Download Mode" and this time it should display the "Firmware Update" screen after a few seconds.
17. Now that you have the Firmware screen this guide will help you get your phone software back up and going (THIS IS WHERE YOU NEED A USB 2.0 PORT): http://www.androidrootz.com/2014/07/how-to-unroot-lg-g3-all-variants.html
Good Luck!!
Imporatant: If the OTA update boot looped your phone like mine DO NOT apply any OTA updates your phone tells you to apply because the same thing will happen again (Trust me I tried it)

craincrizzy, much thanks. Well written. I finally got the phone up. Good to be back in business. Thank you a million times again!

Good to hear. Glad I could help.
Sent from my LG-D850 using XDA Free mobile app