Change from lte to h+ on aosp - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

How can I use only H+ on am soap ROM wit high flashing to a different tom then restoring to a backup...my phone hasn't been making backups correctly and I Dont want to try to restore a backup again till I want to flash another rom

The 3g APN that came with the ROM doesn't work..only the late one

Anyone? I'm desperate for a fix

I think is in Settings/more settings/mobile networks/network mode/ and choose your network. Those listed are LTE/GSM/WCDMA (Auto Mode), GSM only and WCDMA only. Hope this helps.

Doesn't work..it changes back immediately

trh1341 said:
Doesn't work..it changes back immediately
Click to expand...
Click to collapse
I am making the assumption you are on AT&T version of the SGS3 based off the fact that your profile shows you with AT&T. If this is the case before you select from network modes, you need to select "network operator". This will take several minutes to find them all and give you a selection. Once it finally populates, you can choose your carrier. I get 3 AT&T options on my phone so I just choose the first one. Selecting anything other than the AT&T network may not work. Once you have done this you should be able to make the network selection stick. This will only last until you reboot and you will need to redo the process over again. I do not know if switching Airplane mode on and off will cause the need to redo it but you can test it out to check.

Thanks! It works! Thanks for your help! i will only have to use this till I can make good backups again

trh1341 said:
Thanks! It works! Thanks for your help! i will only have to use this till I can make good backups again
Click to expand...
Click to collapse
Glad I could help.
Sent from my SAMSUNG-SGH-I747

Related

Impossible to get network operator

I flashed CM10.1 on my S3 and had the same problem as others where data was intermittent. It worked for some time and after one nightly, I lost my IMEI. So I got back to stock, used the procedure with QPST and got back my IMEI. I got back to cm10.1 and unsurprisingly, I had a hard time having data. But worst off, I had a hard time having cell connection anymore, not even voice or sms. Tried AOKP without any luck. Tried different modems, not luck either. Now I went back to stock and still doesn't work. There's something that is not resetted between flash of ROM that keeps messing up my connection. I also found out that only one network provider is ever found, one is Rogers Wireless (I'm with Bell), or one is EXT. But never any other provider is ever found. And also in *#*#4636#*#* under phone info I can'T change the radio band like I can on the phone of my girlfriend.
So there it is. I'm stuck. I don't really want to buy another phone. It is a software issue for sure. But how can we solve that? Is there any way to restore the EFS to factory default? Could it be buried there? What is the ERI? Could it be that? My stock ROm says that it can't get the ERI version.
Any help is welcome.
my stock telus ERI is unavailable but i think thats normal... i have no problems
from what i understand imei and apn settings are the things to check into
24680 said:
my stock telus ERI is unavailable but i think thats normal... i have no problems
from what i understand imei and apn settings are the things to check into
Click to expand...
Click to collapse
IMEI and APN are good. IMEI will get me data, but I can't even get a cell connection now. No radio at all.
whats your radio band set to?
if i set mine to anything but automatic it wont find networks like yours..
*#*#4636#*#* dont work on my telus s3.
i use a different method
*#197328460# then
UMTS > Debug Screen > Phone control > Network Control > Band selection >
Automatic...
beware what you change in here as there is no return to default
24680 said:
whats your radio band set to?
if i set mine to anything but automatic it wont find networks like yours..
*#*#4636#*#* dont work on my telus s3.
i use a different method
*#197328460# then
UMTS > Debug Screen > Phone control > Network Control > Band selection >
Automatic...
beware what you change in here as there is no return to default
Click to expand...
Click to collapse
Neither of the two works. *#*#4636#*#* was working with CM10/10.1 and AOKP. But not with stock. And the one you suggest after is not working either.
But I remember going ot *#*#4636#*#* before flashing stock rom and I wasn't able to selet any band. On my girlfriend's android phone (HTC) I can.
if it were me.. i would try reflashing stock again... after flashing stock do a factory reset thru recovery... seems to help for clean stock setup.
if still no network i would check that band selection is set to automatic.
maybe someone else with more experience would have a better idea.
you mentioned you changed your band selection and now cant change it back.
i dont think flashing stock changes this.
i think that might be your problem.
ifso you first need to fix phone to use *# code... i have no idea why its not working
it works on my stock telus 4.0.4 and 4.1.1
maybe bell blocks from using *#code?
ebfortin said:
I flashed CM10.1 on my S3 and had the same problem as others where data was intermittent. It worked for some time and after one nightly, I lost my IMEI. So I got back to stock, used the procedure with QPST and got back my IMEI. I got back to cm10.1 and unsurprisingly, I had a hard time having data. But worst off, I had a hard time having cell connection anymore, not even voice or sms. Tried AOKP without any luck. Tried different modems, not luck either. Now I went back to stock and still doesn't work. There's something that is not resetted between flash of ROM that keeps messing up my connection. I also found out that only one network provider is ever found, one is Rogers Wireless (I'm with Bell), or one is EXT. But never any other provider is ever found. And also in *#*#4636#*#* under phone info I can'T change the radio band like I can on the phone of my girlfriend.
So there it is. I'm stuck. I don't really want to buy another phone. It is a software issue for sure. But how can we solve that? Is there any way to restore the EFS to factory default? Could it be buried there? What is the ERI? Could it be that? My stock ROm says that it can't get the ERI version.
Any help is welcome.
Click to expand...
Click to collapse
if i were u i would first try your girls sim in your phone and vise versa and if no luck do the qpst instructions to regain LTE not imei .and if u still cant manually find network operator after that i would format both sd cards and odin back to stock rooted and do the imei injection again for the hell of it and the LTE fix ..and stay on stock rooted or 4.1.2 until u get this figured out cause 4.2 builds are gonna have more probs then 4.1...I know u are having cell connect probs and these instructions are for imei and data but it sounds like your out of options....i lost imei once and had to manually inject with qpst and my reception was one bar til i did the LTE fix and it worked awesome..one more thing is my phone will not select a radio band ever unless i manually select my network operator first or i have no sim card in phone..i have also had sim cards crap out for no apparent reason..good luck
edit. my bad i thought your girl also had gs3..maybe the sims are still the same
stuey25 said:
if i were u i would first try your girls sim in your phone and vise versa and if no luck do the qpst instructions to regain LTE not imei .and if u still cant manually find network operator after that i would format both sd cards and odin back to stock rooted and do the imei injection again for the hell of it and the LTE fix ..and stay on stock rooted or 4.1.2 until u get this figured out cause 4.2 builds are gonna have more probs then 4.1...I know u are having cell connect probs and these instructions are for imei and data but it sounds like your out of options....i lost imei once and had to manually inject with qpst and my reception was one bar til i did the LTE fix and it worked awesome..one more thing is my phone will not select a radio band ever unless i manually select my network operator first or i have no sim card in phone..i have also had sim cards crap out for no apparent reason..good luck
edit. my bad i thought your girl also had gs3..maybe the sims are still the same
Click to expand...
Click to collapse
Thanks for your answer. Really appreciated. I've flashed so much time that I don't see the point of doing it again. I also had, at some point, to inject my IMEI and it worked with QPST.
What I find really strange is that a stock reflash doesn't put everything back to when I bought the phone. Funny thing, after the flash, it knew what my Wi-Fi router password was! So obviously there are some part of the config that is not overwritten. Which I find odd.
I also started playing with the service menu and found a lot of settings for the radio band. No luck yet.
ebfortin said:
Thanks for your answer. Really appreciated. I've flashed so much time that I don't see the point of doing it again. I also had, at some point, to inject my IMEI and it worked with QPST.
What I find really strange is that a stock reflash doesn't put everything back to when I bought the phone. Funny thing, after the flash, it knew what my Wi-Fi router password was! So obviously there are some part of the config that is not overwritten. Which I find odd.
I also started playing with the service menu and found a lot of settings for the radio band. No luck yet.
Click to expand...
Click to collapse
Your WiFi password could have been restored by google just like it puts your contact info back.
If you are doing a Odin to stock that should wipe it clean.
stuey25 said:
if i were u i would first try your girls sim in your phone and vise versa and if no luck do the qpst instructions to regain LTE not imei .and if u still cant manually find network operator after that i would format both sd cards and odin back to stock rooted and do the imei injection again for the hell of it and the LTE fix ..and stay on stock rooted or 4.1.2 until u get this figured out cause 4.2 builds are gonna have more probs then 4.1...I know u are having cell connect probs and these instructions are for imei and data but it sounds like your out of options....i lost imei once and had to manually inject with qpst and my reception was one bar til i did the LTE fix and it worked awesome..one more thing is my phone will not select a radio band ever unless i manually select my network operator first or i have no sim card in phone..i have also had sim cards crap out for no apparent reason..good luck
edit. my bad i thought your girl also had gs3..maybe the sims are still the same
Click to expand...
Click to collapse
This thing is so strange. There's only one network that my phone can see now, and it is 302720. Bell is 302610. No other network is visible. And since I'm with Bell, then I can't connect to 302720. I'm in for emergency calls only. That's why I thought it may have to do with radio. But it seems Rogers (302720) and Bell use the same bands. A channel maybe? But this should be all automatic! It's a pretty stupid bug let me tell you!
Maybe a SIM card issue? That would be quite a coincidence that it happen exactly when I'm playing with ROMs...
RUNNERX said:
Your WiFi password could have been restored by google just like it puts your contact info back.
If you are doing a Odin to stock that should wipe it clean.
Click to expand...
Click to collapse
Ah that's a good possibility. I didn't know it was saving passwords as well.
So if it wipes clean, how come this bug stays? There is obviously something that is not wiped and overwritten or else it would work.
How can one tell if someone losses their IMEI number? Unable to make phone calls? No 4g/ lte?
Sent from my SGH-I747 using xda app-developers app
Deggy said:
How can one tell if someone losses their IMEI number? Unable to make phone calls? No 4g/ lte?
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
When you go to info about your phone, in status you usually have your IMEI number. It'll show 0 if it's corrupted. Or sometimes it's a generic IMEI dans is used when the real one is unknown. It's 049 something I think.
Without an IMEI number you can do phone call. But you'll never have a data connection.

[Q] keep auto connect to LTE

Hey!
So my M919V has LTE disabled..basically doesn't have under mobile network and network mode: "LTE/GSM/WCDMA (auto connect)" .
I can't flash tmobile modem due to AUTH: Fail, and secure check fail.
I flashed stock, original i337M rom and it got me the LTE option: under mobile network and network mode: "LTE/GSM/WCDMA (auto connect)" .
then I flashed back the original M919V stock rom. I have the "LTE/GSM/WCDMA (auto connect)" option, but the rom naturally goes to "GSM/WCDMA (auto connect)" only, even though the LTE is present.
So, when i pick the LTE option and reboot phone, it switches back to GSM/WCDMA . How do I fix this, i want it to always stay at "LTE/GSM/WCDMA (auto connect)".
Please help?
im on stock original windmoile 4.2.2 firmware - M919V .
Do you have this APN?
Biker1 said:
Do you have this APN?
Click to expand...
Click to collapse
No, the only APN i see is
"Bell internet" my carrier APN.
LimitsX said:
How do I access the APN?!
Click to expand...
Click to collapse
Settings
Connections
More networks
Mobile networks
Access Point Names
Biker1 said:
Settings
Connections
More networks
Mobile networks
Access Point Names
Click to expand...
Click to collapse
lol Thank you for that, i figured it !
So, i wrote that i only see "Bell internet" APN only.
so im connected to "4G" my rom doesnt say LTE idk why. but i have to manually connect it, like i said in my original post. but it switches to just GSM/WCDMA one after I reboo my phone.
I want it to stay at LTE/GSM/WCDMA, though.
LimitsX said:
lol Thank you for that, i figured it !
So, i wrote that i only see "Bell internet" APN only.
so im connected to "4G" my rom doesnt say LTE idk why. but i have to manually connect it, like i said in my original post. but it switches to just GSM/WCDMA one after I reboo my phone.
I want it to stay at LTE/GSM/WCDMA, though.
Click to expand...
Click to collapse
The issue being why isn't the LTE setting locking in after Boot.
The LTE setting is there which you can manually set. But upon Reboot, you have to manually set it again?
Suggestion would be to ODIN Samsung Stock Firmware. Make sure the Firmware is for your ddevice.
ODINing back to stock will flash the stock ROM, Recovery, Kernel and Modem, and get you back to where you were prior to your issue.
If you're running a custom ROM/Recovery, install those afterwards.
But first see if your issues are resolved.
Biker1 said:
The issue being why isn't the LTE setting locking in after Boot.
The LTE setting is there which you can manually set. But upon Reboot, you have to manually set it again?
Suggestion would be to ODIN Samsung Stock Firmware. Make sure the Firmware is for your ddevice.
ODINing back to stock will flash the stock ROM, Recovery, Kernel and Modem, and get you back to where you were prior to your issue.
If you're running a custom ROM/Recovery, install those afterwards.
But first see if your issues are resolved.
Click to expand...
Click to collapse
I am already on a original stock rom though :S .
LimitsX said:
I am already on a original stock rom though :S .
Click to expand...
Click to collapse
I'm not sure, although I've read about this happening before. To clarify, it used to auto lock, but now it isn't. Can you remember if you made any changes prior to the issue appearing?
App installs, Kernel changes, etc.
I understand you're on stock now, but were any changes made which caused the issue, which prompted you to flash Stock Firmware, but the issue remained?

[Q] No Service. Data working but no Call/Text.

Hello!
I have m919 T-Mobile Galaxy s4 but I'm with other carrier (Wind Canada). I rooted the phone about a month ago, I believe, using THIS guide.
I spent yesterday in environment where I didn't had coverage for most of the day, but i haven't gotten it back yet. Sounds really weird as it might be not connected to the fact at all. I have 4G connection active, which means that I have internet, but it keeps 'searching' for service and I can't Call/Text anyone, neither I can receive calls or texts. Instead of the bar at the top showing how good coverage i have it just shows a crossed out circle icon.
I've tried reboots, keeping my phone off for 30mins without battery, taking out sim and putting it back in, changing network modes and resetting APN (all from settings panel).
Have anyone experienced something like that and how do I fix it? It was working perfectly for last couple of months and the phone didn't get any damage yesterday neither.
P.S Did the the regular factory reset (don't know if it affects rooting) but it didn't change anything. =
I have same problem.
Did you solve it? and how?
Haven't solved it, that was the whole point of my post!
kokozaurs said:
Haven't solved it, that was the whole point of my post!
Click to expand...
Click to collapse
Never had this happen to me. Data works off your signal, something is wickedly wrong. I'd flash the modem again if you are on 4.2.2 bootloader (doesn't matter which rom or android version). If that fails, go intonrecovery, wipe cache, wipe dalvik cache, and wipe data. If that fails, backup your data and Odin flash back to 100% stock. If that fails, more than likely your /efs folder was corrupted.
Sent from my SGH-M919 using XDA Premium 4 mobile app
Please don't create multi thread on the same topic
xdapowerapps said:
Never had this happen to me. Data works off your signal, something is wickedly wrong. I'd flash the modem again if you are on 4.2.2 bootloader (doesn't matter which rom or android version). If that fails, go intonrecovery, wipe cache, wipe dalvik cache, and wipe data. If that fails, backup your data and Odin flash back to 100% stock. If that fails, more than likely your /efs folder was corrupted.
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I think I'm gonna flash it back to 100% stock, but the problem is that I'm on mac and I don't know how to flash it back. Is there any guide on how to do it from MAC platform?
Thanks!!
kokozaurs said:
I think I'm gonna flash it back to 100% stock, but the problem is that I'm on mac and I don't know how to flash it back. Is there any guide on how to do it from MAC platform?
Thanks!!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=755265
http://forums.techdiscussion.in/sho...Heimdall-Terminal-on-Mac-OS-(Odin-Alternative)
Second one will be more helpful. Good luck! :good:
xdapowerapps said:
http://forum.xda-developers.com/showthread.php?t=755265
http://forums.techdiscussion.in/sho...Heimdall-Terminal-on-Mac-OS-(Odin-Alternative)
Second one will be more helpful. Good luck! :good:
Click to expand...
Click to collapse
Ok, so I got heimdall, and got the recovery.img from the other topic. I followed the steps that was provided in the second link, but nothing much changed, it successfully uploaded the recovery.img, then i did recovery boot with power button + home button + volume up, it did some things with a pirate android guy in the back and thats it, booted up. Not sure if I have everything back to stock or not - either way, the issue with the network hasn't been resolved!
kokozaurs said:
Haven't solved it, that was the whole point of my post!
Click to expand...
Click to collapse
Tried this?
go to settings/more networks/Mobile networks/Network operators/Search now......
It might take a minute or two, then show you some networks it finds. Select your provider and it should list some options for you.
need to see Mobile data with a check, Data roaming checked, network mode should be LTE/GSM/WCDMA(auto connect)
If you KNOW what your APN (access Point Name) is you can check if it's correctly there.
It usually is downloaded with the search for network so just try with whatever is ther for now.
Back all the way out, and power off. Take out the battery, wait like 30 seconds, replace the battery and power on again.
See if you get service and can dial out.
Aloha and Good Luck!
bobolinko said:
Tried this?
go to settings/more networks/Mobile networks/Network operators/Search now......
It might take a minute or two, then show you some networks it finds. Select your provider and it should list some options for you.
need to see Mobile data with a check, Data roaming checked, network mode should be LTE/GSM/WCDMA(auto connect)
If you KNOW what your APN (access Point Name) is you can check if it's correctly there.
It usually is downloaded with the search for network so just try with whatever is ther for now.
Back all the way out, and power off. Take out the battery, wait like 30 seconds, replace the battery and power on again.
See if you get service and can dial out.
Aloha and Good Luck!
Click to expand...
Click to collapse
yep, one of first routines i tried. No difference
kokozaurs said:
yep, one of first routines i tried. No difference
Click to expand...
Click to collapse
Ok, now you might want to call your provider and ask them to remove you from their network and reinsert you again. That procedure will often re-enable normal operation of cellular connectivity.
They will ask you to power down and remove your battery for about a minute, then power up again.
Aloha and Good Luck!
Tried it all
Well im in the same boat here.
I checked the IMEI is correct
i did a full stock MK5 install with Odin without sim inserted and with
*#2263# helps it recognizes the network on the search list (WIND)
but it wont connect (failed to connect try again)
sometimes it connects to 4G and i can use the web
but no calls or sms
i noticed i dont have LTE enabled which ill do tomorrow
i even opened my phone to check that no cables came off as it was in service for a broken screen
tried a different sim from koodo wich also acts weird it connects to data but wont make phone calls or sms
the problems began after its been UNLOCKED (sim free)
any suggestions? im willing to try anything
its been in service 4 times and still they cant figure it out...
thanks!
ph3r0c1ty said:
Well im in the same boat here.
I checked the IMEI is correct
i did a full stock MK5 install with Odin without sim inserted and with
*#2263# helps it recognizes the network on the search list (WIND)
but it wont connect (failed to connect try again)
sometimes it connects to 4G and i can use the web
but no calls or sms
i noticed i dont have LTE enabled which ill do tomorrow
i even opened my phone to check that no cables came off as it was in service for a broken screen
tried a different sim from koodo wich also acts weird it connects to data but wont make phone calls or sms
the problems began after its been UNLOCKED (sim free)
any suggestions? im willing to try anything
its been in service 4 times and still they cant figure it out...
thanks!
Click to expand...
Click to collapse
Ok I found the solution. Apparently I have bought a stolen phone. Check the imei if it hasn't been blacklisted!

[Q] Network Reverting to GSM/WCDMA Only

Hi,
I bought a 2nd hand G3 from a store recently and have noticed that under network settings even if I select GSM/WCDMA/LTE as soon as I leave the menu it reverts to GSM/WCDMA only. It sometimes finds and attaches to the 4G network but prefers the HSPA network and connects to that as a priority even if 4G is in the area.
I've done a rom flash with clear option and done a factory reset but that option continues to stay set to GSM/WCDMA so wondered if somebody had changed something in the hidden menus and that I might need to change it back and what setting might need changing?
I've tried 2 official rom flashes just to make sure it wasn't a bug, they are the 10G and the 10J roms, the 10J being whats installed now.
Any ideas anyone??
Go to dial press 3845#*your phones model and then press # like 3845#*855# then go to lte only and then go to modem settings and then rat selection and then choice what you want
Tried that makes no difference. As soon as you leave the menu it still reverts back
Delete lteconfig with TB
Whats TB?
Jinxy said:
Whats TB?
Click to expand...
Click to collapse
Titanium Backup
I'm not rooted so titanium backup won't work
I have the exact same problem, after you choose GSM/WCDMA/LTE and exit the menu it goes back to GSM/WCDMA im on D855 with 10i not rooted.
Ok so it might be a software thing with the later builds? I'm on 10j at the moment and have done factory reset full reflash the lot, so thought it might be something that had previously been done in the hidden menu.
Sent from my iPad using Tapatalk
Jinxy said:
Ok so it might be a software thing with the later builds? I'm on 10j at the moment and have done factory reset full reflash the lot, so thought it might be something that had previously been done in the hidden menu.
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
I was using 10a-eur before and everything was fine im using 10i-global wich i updated with lgflashtool, so im guessing either that is the problem (eur to global) or its with the update itself.
I'd guess then it's in the update 10i/j
Sent from my iPad using Tapatalk
Jinxy said:
I'd guess then it's in the update 10i/j
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
If you do not want to root you could consider to flash it back to the v10 version that did not gave you any problems with it! But the most easy way is to root it using purpledrake and then install titanium backup and delete the lteconfig!
http://forum.xda-developers.com/lg-g3/development/root-root-lg-g3-easily-purpledrake-lite-t2821000
vak20 said:
If you do not want to root you could consider to flash it back to the v10 version that did not gave you any problems with it! But the most easy way is to root it using purpledrake and then install titanium backup and delete the lteconfig!
http://forum.xda-developers.com/lg-g3/development/root-root-lg-g3-easily-purpledrake-lite-t2821000
Click to expand...
Click to collapse
So i rooted my phone and did all that it seems to be working now but if i want to remove root i have to reinstall the kdz wich means it will go back to not working again right?
edit: just tested myself root gone and it goes back to not staying on LTE damm bug -.-
I rooted, removed the lte file and flashed it and had the same problem, so I downloaded the 10h kdz again and it fixed it, so the 10g and 10j files I had must contain the duff lte file
Sent from my iPad using Tapatalk
Jinxy said:
I rooted, removed the lte file and flashed it and had the same problem, so I downloaded the 10h kdz again and it fixed it, so the 10g and 10j files I had must contain the duff lte file
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
I have the 10i version, guess im downloading the H to give it a go.
Jinxy said:
I rooted, removed the lte file and flashed it and had the same problem, so I downloaded the 10h kdz again and it fixed it, so the 10g and 10j files I had must contain the duff lte file
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
I agree with you! I flashed few days ago the10j files and I noticed that 2G/3G/4G was missing. Today I decided to reflash the D85510H_00. This .kdz files are suitable for my IMEI. I downladed from http://lg-firmware-rom.com/. Now 2G/3G/4G is active. I think that will help!
For those who aren't rooted, try NOT going into the "Mobile Networks" menu to switch to "GSM/WCDMA/LTE".
Try this instead.
-Go into dialer and dial in 3845#*855#
-Select "LTE-Only" and go into "Modem Settings"
-select "RAT Selection" and select "GSM / WCDMA /LTE auto"
See if this helps you retain LTE. If it does, do NOT go into "Mobile Networks" or switch to "2G only" because I have that it disables my LTE when I do that.
O29C said:
For those who aren't rooted, try NOT going into the "Mobile Networks" menu to switch to "GSM/WCDMA/LTE".
Try this instead.
-Go into dialer and dial in 3845#*855#
-Select "LTE-Only" and go into "Modem Settings"
-select "RAT Selection" and select "GSM / WCDMA /LTE auto"
See if this helps you retain LTE. If it does, do NOT go into "Mobile Networks" or switch to "2G only" because I have that it disables my LTE when I do that.
Click to expand...
Click to collapse
I tried that, it goes into 4g sometimes but it preferes 3g/2g conections for some reason, switched to 10h eur and it shows on the network menu lte enabled and it works fine.

No 4G

I've searched and tried the suggestions here and installed creepers (very cool) and still only 3g I'm on the latest Emotionos on my 910v with newest twrp. This is a great rom and I donated anyway but has anyone had any luck getting the 4 g back?
sportytony said:
I've searched and tried the suggestions here and installed creepers (very cool) and still only 3g I'm on the latest Emotionos on my 910v with newest twrp. This is a great rom and I donated anyway but has anyone had any luck getting the 4 g back?
Click to expand...
Click to collapse
Do a full firmware flash. Use the clp1 without recovery and aboot. That's the god fix. Then flash your rom again. All good.
sportytony said:
I've searched and tried the suggestions here and installed creepers (very cool) and still only 3g I'm on the latest Emotionos on my 910v with newest twrp. This is a great rom and I donated anyway but has anyone had any luck getting the 4 g back?
Click to expand...
Click to collapse
flash this then in settings go to more under wireless & networks then mobile networks then access point names then in the three dot menu reset to default and reboot your phone
weard1212 said:
flash this then in settings go to more under wireless & networks then mobile networks then access point names then in the three dot menu reset to default and reboot your phone
Click to expand...
Click to collapse
Thank you thank you! Worked like a charm! I thought I searched everywhere and was freaking that I was gonna have to start from scratch. But this was perfect. I hope someone else finds this and thanks you.
weard1212 said:
flash this then in settings go to more under wireless & networks then mobile networks then access point names then in the three dot menu reset to default and reboot your phone
Click to expand...
Click to collapse
After I flash the zip, should I still wipe dalvich cache before rebooting? Thanks
dhplap said:
After I flash the zip, should I still wipe dalvich cache before rebooting? Thanks
Click to expand...
Click to collapse
no, its not necessary for this.
Worked for me as well(!)
Flashing LTEfix.zip, then resetting networks to default worked for me as well.
Samsung N910V (trtlevzw) EmotionOS 20170129-OFFICIAL Baseband (modem) N910VVRU2CPF3.
Was only seeing 3G, now see 4G. Not sure if that's a change in indicators or actual 4G (LTE-A), but it seems to have worked.
Thanks!
weard1212 said:
flash this then in settings go to more under wireless & networks then mobile networks then access point names then in the three dot menu reset to default and reboot your phone
Click to expand...
Click to collapse
Hi, I was wondering if you could point me in the direction of the thread where the lte fix came from. I just want to do a little more reading on it. Thanks
There are no words, weard1212! I owe you a beer or pizza! I was gonna have to buy a N4 off swappa since losing 4g a week ago. THANK YOU SO MUCH SIR! The ltefix got my 4g back!!!
I do have a new issue though. I'm on emotionOS build 20170328, baseband cfp3 as well. In global network mode I still only get 3g, but 4g works fine when I switch to wcdma/lte. Even weirder: in the expanded pull down notification bar it says "no service" where it should say "Verizon wireless" under the cellular data quick tile button (4g still works though). Any ideas, I'm almost back to being perfect! Thanks again friend!
okay so I can't send texts over lte/cdma? They work on global/3G but not when I have 4g. I'm certain this can be fixed and that's it not hardware. Please, anybody have experience or opinions? Ran the flash twice now, reset apn, network settings and restored nandroids. On global mode under apns it's blank, "the apns for this user cannot be displayed". Flash a different modem perhaps?
weard1212 said:
flash this then in settings go to more under wireless & networks then mobile networks then access point names then in the three dot menu reset to default and reboot your phone
Click to expand...
Click to collapse
Old thread but if you are still around do you know what file the binary in this zip is replacing?
droidzer1 said:
Old thread but if you are still around do you know what file the binary in this zip is replacing?
Click to expand...
Click to collapse
system/etc/apns-conf.xml

Categories

Resources