I've searched and tried the suggestions here and installed creepers (very cool) and still only 3g I'm on the latest Emotionos on my 910v with newest twrp. This is a great rom and I donated anyway but has anyone had any luck getting the 4 g back?
sportytony said:
I've searched and tried the suggestions here and installed creepers (very cool) and still only 3g I'm on the latest Emotionos on my 910v with newest twrp. This is a great rom and I donated anyway but has anyone had any luck getting the 4 g back?
Click to expand...
Click to collapse
Do a full firmware flash. Use the clp1 without recovery and aboot. That's the god fix. Then flash your rom again. All good.
sportytony said:
I've searched and tried the suggestions here and installed creepers (very cool) and still only 3g I'm on the latest Emotionos on my 910v with newest twrp. This is a great rom and I donated anyway but has anyone had any luck getting the 4 g back?
Click to expand...
Click to collapse
flash this then in settings go to more under wireless & networks then mobile networks then access point names then in the three dot menu reset to default and reboot your phone
weard1212 said:
flash this then in settings go to more under wireless & networks then mobile networks then access point names then in the three dot menu reset to default and reboot your phone
Click to expand...
Click to collapse
Thank you thank you! Worked like a charm! I thought I searched everywhere and was freaking that I was gonna have to start from scratch. But this was perfect. I hope someone else finds this and thanks you.
weard1212 said:
flash this then in settings go to more under wireless & networks then mobile networks then access point names then in the three dot menu reset to default and reboot your phone
Click to expand...
Click to collapse
After I flash the zip, should I still wipe dalvich cache before rebooting? Thanks
dhplap said:
After I flash the zip, should I still wipe dalvich cache before rebooting? Thanks
Click to expand...
Click to collapse
no, its not necessary for this.
Worked for me as well(!)
Flashing LTEfix.zip, then resetting networks to default worked for me as well.
Samsung N910V (trtlevzw) EmotionOS 20170129-OFFICIAL Baseband (modem) N910VVRU2CPF3.
Was only seeing 3G, now see 4G. Not sure if that's a change in indicators or actual 4G (LTE-A), but it seems to have worked.
Thanks!
weard1212 said:
flash this then in settings go to more under wireless & networks then mobile networks then access point names then in the three dot menu reset to default and reboot your phone
Click to expand...
Click to collapse
Hi, I was wondering if you could point me in the direction of the thread where the lte fix came from. I just want to do a little more reading on it. Thanks
There are no words, weard1212! I owe you a beer or pizza! I was gonna have to buy a N4 off swappa since losing 4g a week ago. THANK YOU SO MUCH SIR! The ltefix got my 4g back!!!
I do have a new issue though. I'm on emotionOS build 20170328, baseband cfp3 as well. In global network mode I still only get 3g, but 4g works fine when I switch to wcdma/lte. Even weirder: in the expanded pull down notification bar it says "no service" where it should say "Verizon wireless" under the cellular data quick tile button (4g still works though). Any ideas, I'm almost back to being perfect! Thanks again friend!
okay so I can't send texts over lte/cdma? They work on global/3G but not when I have 4g. I'm certain this can be fixed and that's it not hardware. Please, anybody have experience or opinions? Ran the flash twice now, reset apn, network settings and restored nandroids. On global mode under apns it's blank, "the apns for this user cannot be displayed". Flash a different modem perhaps?
weard1212 said:
flash this then in settings go to more under wireless & networks then mobile networks then access point names then in the three dot menu reset to default and reboot your phone
Click to expand...
Click to collapse
Old thread but if you are still around do you know what file the binary in this zip is replacing?
droidzer1 said:
Old thread but if you are still around do you know what file the binary in this zip is replacing?
Click to expand...
Click to collapse
system/etc/apns-conf.xml
Related
This thread is a place for people to ask questions and get answers about CM 10.1 Nighty and Official when it comes out. This thread is the proper place for these kind of questions for now.
Link to CM 10.1 Nightly
http://jenkinsmanifest.clockworkmod.com/device/d2att/all
CM 10.1 Changelog credit lisek99
http://10.1.cmxlog.com/?device=d2att
4.2 GAPPS Credit Mike Ramsay
http://goo.im/devs/itsmikeramsay/gapps-jb-20121212-signed.zip
Ktoonsez 4.2 Kernel
http://forum.xda-developers.com/showthread.php?t=1871946
CyanogenMod's Progress
http://review.cyanogenmod.org/#/q/status:merged,n,z
itsmikeramsay's rendition of CM 10.1
http://forum.xda-developers.com/showthread.php?t=2039995
It has "..a few cherry-picks. We're shooting for that sweet spot between CM10.1 and AOKP."
Euroskank CM 10.1 kang d2att
http://forum.xda-developers.com/showthread.php?t=1806921
has cherry picks as well
Common Flash Process
1. wipe cache/dalvik
2. wipe system
3. factory reset
4. wipe data
5. TWRP users wipe internal-wipes internal data that could corrupt something
6. flash rom
7. flash gapps
Do this if you have any unexpected problems.
If you want flash ktoonsez kernel but if you have problems follow the flashing procedure before posting about problems/questions
Possible Data Fix
Alright, for anyone having issues with the CM10.1 "pre-release" builds (official or otherwise) not allowing you to keep a connection, here's how to fix it:
Download one of the modem files for your device (read!) in the OP of the modem thread. Any of the options will work, pick the one you want.
Keep that ZIP on your EXTERNAL storage. You need to be able to find it from CWM/TWRP.
With CM10.1 running, disable data from System Settings > "More..." (under Data Usage) > Mobile Networks > "Data enabled" (uncheck it)
Reboot into recovery. (Long-press Power, "Reboot", "Recovery", [OK])
Flash the modem from step 1.
Clear Cache and Dalvik Cache.
Reboot back into CM10.1.
Wait 30 seconds!
Enable data from System Settings > "More..." (under Data Usage) > Mobile Networks > "Data enabled" (check it).
You should have data within 10-20 seconds!
If this doesn't work, you might need to reset your APNs to default. This will only happen if you make changes to your APNs, so go into the APN list and press the menu key and hit "Reset to defaults". Then start over at step 1.
To prevent this problem, you should disable data before shutting off your device. You can enable it 30 seconds after boot and it should work again. If you get stuck in the "disconnect-loop", repeat these steps.
Themes
Sense 4 10.1 theme (might work for other roms)
http://forum.xda-developers.com/showthread.php?t=2051326
My dataaa, oh my dataaaa.
I almost have everything working, however I can't seem to get my 4G data to work.
khep24 said:
I almost have everything working, however I can't seem to get my 4G data to work.
Click to expand...
Click to collapse
1) Do you mean LTE, HSPA(+), or something else? HSPA(+) doesn't seem to work very well under 4.2 conditions.
2) Who's your carrier?
smelenchuk said:
1) Do you mean LTE, HSPA(+), or something else? HSPA(+) doesn't seem to work very well under 4.2 conditions.
2) Who's your carrier?
Click to expand...
Click to collapse
I'm sorry for being vague I thought this whole thread was just for GS3 AT&T version, but LTE data for AT&T. Thanks
khep24 said:
I'm sorry for being vague I thought this whole thread was just for GS3 AT&T version, but LTE data for AT&T. Thanks
Click to expand...
Click to collapse
The same model of phone (well, more or less) is used for several Canadian carriers, which is why I'm asking.
Just to confirm: are you getting a data connection on something other than LTE? If so, that narrows down the number of things that could be wrong - my two immediate guesses would be that you have the wrong APN set or you have the wrong network type set in either Settings -> More -> Mobile Networks or in the Phone Info menu you can get by dialing *#*#4636#*#* (these are both known to happen immediately after flashing something).
smelenchuk said:
The same model of phone (well, more or less) is used for several Canadian carriers, which is why I'm asking.
Just to confirm: are you getting a data connection on something other than LTE? If so, that narrows down the number of things that could be wrong - my two immediate guesses would be that you have the wrong APN set or you have the wrong network type set in either Settings -> More -> Mobile Networks or in the Phone Info menu you can get by dialing *#*#4636#*#* (these are both known to happen immediately after flashing something).
Click to expand...
Click to collapse
There it goes , that did the trick thanks for the help. Now my GS3 is working perfectly with the update.
Are you getting a 4G logo on your bar? I cannot get anything but 3g,H, and H+. Mobile network setting set to LTE/GSM/WCDMA. any help would be nice, I seem to mainly get H+ and sometime switches to 3G.
Using ATT carrier.
Sent from my Nexus 7
sliverboyx2002 said:
Are you getting a 4G logo on your bar? I cannot get anything but 3g,H, and H+. Mobile network setting set to LTE/GSM/WCDMA. any help would be nice, I seem to mainly get H+ and sometime switches to 3G.
Using ATT carrier.
Sent from my Nexus 7
Click to expand...
Click to collapse
I'm going to offer the same suggestions: check your APN settings (that seems to be the big one for AT&T) and check your network types.
I assume you've had LTE coverage under other ROMs?
Hey guys, when I connect my phone to my PC I can't see any folders. Anyone else having this?
AOKP 4.2 preview
Sent from my SGH-I747 using xda premium
Everything installs fine,....but the google play store gives me a "no connection" error....but browsing the internet works fine. I followed all the steps exactly.
zap12341 said:
Hey guys, when I connect my phone to my PC I can't see any folders. Anyone else having this?
AOKP 4.2 preview
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Are no files displayed at all or is it just displaying differently? Once I updated, it moved all my files to the folder/0. Check there and it should display your folders as on 4.1. I believe it has to do with the multiple user functionality.
Sent from my Nexus 7 using xda app-developers app
When I flashed it, it didn't create a /0 for me.
Sent from my SGH-I747 using xda premium
zap12341 said:
When I flashed it, it didn't create a /0 for me.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
I can't see any folders either. Same ROM.
Sent from my SAMSUNG-SGH-I747 using xda premium
zap12341 said:
Hey guys, when I connect my phone to my PC I can't see any folders. Anyone else having this?
AOKP 4.2 preview
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Its a preview. Its not supposed to work. The preview I released is basically just a screenshot of what's to come. I haven't even release a full ROM yet.
Emoticons
The emoticons are now implemented in the keyboard, is there a way to flash em over or download em. If anyone else has this issue let me know.
I can't get Portable Wi-Fi hotspot to work?
any ideas, has anyone else tried it?
is there a way to submit bug reports for nightly builds?
no data connection at all now via the radio.(but the phone can receive & make calls) I followed the steps to check it as posted by another user above....but still tryin different modem files.
did you try the fix in the op?
CM10.1 on Bell Galaxy SIII
I installed CM10.1 yesterday. Most of it works flawlessly. Had to uninstall and reinstall some apps (Google Play Magazines) for example. But almost all of them work as is.
I do have a problem with cell data connectivity. I need to reboot a couple of time to make it work. When it does, it works flawlessly. But when it doesn't there's nothing you can do. And it's random. You reboot, it may or may not work. If it doesn't, you reboot until it does. I also didn't have H+. I changed my baseband version and I now have H+.
This very much like a limit condition on init sequence. It was working with CM10 so I guess the components initialization sequence changed a bit for CM10.1.
wujiku said:
did you try the fix in the op?
Click to expand...
Click to collapse
Ya that's what I've been working on. I finally did get it working (for now) with the modem 3rd down on the list.
Does CM10.1 have a LTE icon that appears when LTE is being used, or does it always just say "4G"?
---------- Post added at 06:48 PM ---------- Previous post was at 06:39 PM ----------
ebfortin said:
I installed CM10.1 yesterday. Most of it works flawlessly. Had to uninstall and reinstall some apps (Google Play Magazines) for example. But almost all of them work as is.
I do have a problem with cell data connectivity. I need to reboot a couple of time to make it work. When it does, it works flawlessly. But when it doesn't there's nothing you can do. And it's random. You reboot, it may or may not work. If it doesn't, you reboot until it does. I also didn't have H+. I changed my baseband version and I now have H+.
This very much like a limit condition on init sequence. It was working with CM10 so I guess the components initialization sequence changed a bit for CM10.1.
Click to expand...
Click to collapse
This is getting to be my experience. I just tried a few different modems, and finally got it to work...then I decided to reboot...and it stopped working. A few reboots later, and it still is down for the count. I guess I'll try another modem.
[Q] SGH-T989 will not boot past samsung black screen after running "AutomatedDebloat"
I rooted my T-Mobile SGH-T989 Android 4.0.4 using "Odin/Clockwork Mod" success! Yeah!
I then ran "AutomatedDebloat.bat" which did nothing as far as removing T-Mobile crap/bloat ware.
Now my phone will not boot past the "flashing" Samsung logo black screen.
I can boot to "CWM-based Recovery v5.0.2.6.
This is my first attempt at this level of phone mod and at this point I do not want to try anything else without some expert assistance.
Thanks in advance.
If you can get into recovery try wiping dalvik and wiping cache then reboot. If this does not work you can : A) factory reset B) put rom on ex card and install new rom or C) use odin to flash new rom. Try one of these options.
Sent from my SGH-T989 using Tapatalk
richardlibeau said:
If you can get into recovery try wiping dalvik and wiping cache then reboot. If this does not work you can : A) factory reset B) put rom on ex card and install new rom or C) use odin to flash new rom. Try one of these options.
thanks for your response and assistance. 1st I ran thru my previous actions after the root again and then flashed with JMTX3. I can now access the phone.
Now for the 2nd problem, I cannot access the internet with this phone. Wifi is Ok but unlike my other Android phones this one refuses to connect to the internet no matter what I do.
I am sure it it a T-imMobile issue but I have had no success with resolving this.
Click to expand...
Click to collapse
Had the same problem before try a new radio like UVLE1 etc. Or try a new kernel it should connect to wifi after you change one of these or both.
Sent from my SGH-T989 using Tapatalk
puuyai_bahn said:
thanks for your response and assistance. 1st I ran thru my previous actions after the root again and then flashed with JMTX3. I can now access the phone.
Now for the 2nd problem, I cannot access the internet with this phone. Wifi is Ok but unlike my other Android phones this one refuses to connect to the internet no matter what I do.
I am sure it it a T-imMobile issue but I have had no success with resolving this.
Click to expand...
Click to collapse
Try setting up your APN manually or change a radio.
re: no internet with SGH-T989
android88 said:
Try setting up your APN manually or change a radio.
Click to expand...
Click to collapse
I think I have muddied the waters a bit.
This phone has always had access to wifi and does now. For years my previous phones were HTC Android. To access mobile networks it was "Settings" - "Wireless & Networks" - "Mobile Network" - "Connect" and I was connected. The APN settings filled in automatic. What's up with Samsung or am I just being thick?
re:SGH-T989 will not boot past samsung black screen after running "AutomatedDebloat"
puuyai_bahn said:
I think I have muddied the waters a bit.
This phone has always had access to wifi and does now. For years my previous phones were HTC Android. To access mobile networks it was "Settings" - "Wireless & Networks" - "Mobile Network" - "Connect" and I was connected. The APN settings filled in automatic. What's up with Samsung or am I just being thick?
Click to expand...
Click to collapse
Problem Solved!
I had created a new APN before the root that did not work.
Created the new APN after the root and SUCCESS!
Thanks for the help!
Hello,
I purchased the new Nexus 7 LTE last friday. The very next day I unlocked, rooted, and installed the ElementalX kernel (with the stock ROM) . All worked well.
Sunday I tried installing a ROM (IceCold). It ran fine, and I was on wifi, so everything was working. Until I go out of my house. Mobile data was not working at all. I later reflashed stock, and did a factory reset. Mobile data worked again.
I thought it might just be the ROM, so I decided to instead flash P.A.C Nightly 4.3.1 with default kernel, and again, same issue. The mobile data icon is grayed out, unless I connect to wifi, and then it goes back to the blue color.
I have tried everything I could think of:
Restore stock recovery, kernel, and ROM.
Help would be greatly appreciated. Thanks ya'll.
Bump
Does no one have the same problems? Could this just be me missing something?
You are probably using a rom for flo Devices that do not have lte or 3g connectivity. Only use roms from the "nexus 7 (2013) LTE Android Development" forum!
Sent from my Nexus 7 using XDA Premium 4 mobile app
It could be that the custom ROM you are trying does not include the APN for your carrier. Go to Settings -> More -> Mobile Networks -> Access Point Names. You will need to find the correct APN settings for your carrier. You could copy them down while you're on stock, or look them up online.
Dabarr said:
You are probably using a rom for flo Devices that do not have lte or 3g connectivity. Only use roms from the "nexus 7 (2013) LTE Android Development" forum!
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No, I checked this. The first ROM I tried installing wouldn't install because of it being for flo devices. However the next two were both made for deb devices. So that wasn't the issue. Thanks though.
raptir said:
It could be that the custom ROM you are trying does not include the APN for your carrier. Go to Settings -> More -> Mobile Networks -> Access Point Names. You will need to find the correct APN settings for your carrier. You could copy them down while you're on stock, or look them up online.
Click to expand...
Click to collapse
This does make a lot of sense, could it be it's not reading the Sim correctly perhaps? I'll be sure to try this when I get the chance.
Most APN settings are easily found with search of the carrier name and APN. You may have to enter these manually.
Did you try mobile data before rooting and installing a ROM/Kernel?
Wrngway said:
Most APN settings are easily found with search of the carrier name and APN. You may have to enter these manually.
Did you try mobile data before rooting and installing a ROM/Kernel?
Click to expand...
Click to collapse
Data worked before during stock, and when I had a custom Kernel with the stock ROM. So the cause definitely had something to do with the ROM. After I reset everything (relocked and unrooted) it still works. I am redoing the unlock and root as I type this, and I will hopefully get a ROM installed and check to see if the APN settings really were the problem
Flare_ said:
Data worked before during stock, and when I had a custom Kernel with the stock ROM. So the cause definitely had something to do with the ROM. After I reset everything (relocked and unrooted) it still works. I am redoing the unlock and root as I type this, and I will hopefully get a ROM installed and check to see if the APN settings really were the problem
Click to expand...
Click to collapse
Well that's good news. The only reason I asked was to make sure it wasn't possibly hardware related.
raptir said:
It could be that the custom ROM you are trying does not include the APN for your carrier. Go to Settings -> More -> Mobile Networks -> Access Point Names. You will need to find the correct APN settings for your carrier. You could copy them down while you're on stock, or look them up online.
Click to expand...
Click to collapse
Wrngway said:
Well that's good news. The only reason I asked was to make sure it wasn't possibly hardware related.
Click to expand...
Click to collapse
Woot! APN settings fixed it. Thanks y'all. Definitely saved me a lot of hassle with my insane schedule I have going on, I appreciate it greatly.
Have a good one
-Matt
I had the CM11 rom...flashed the Vanir rom and since have not been able to get any network. I made a backup before and reverted to that backup but now theres no network even in CM11...I am using the LG F180S...Help please :\
neaznc021 said:
I had the CM11 rom...flashed the Vanir rom and since have not been able to get any network. I made a backup before and reverted to that backup but now theres no network even in CM11...I am using the LG F180S...Help please :\
Click to expand...
Click to collapse
I had similar problem.
I'm on E975 and I was able to get networks connecting manually because LTE is on by default (but it was always droping)
After changing to 3G no more problems. Have you tried this?
P.S. I never tried to solve the 4G issue but probably I need to change APN settings.
rimsilva said:
I had similar problem.
I'm on E975 and I was able to get networks connecting manually because LTE is on by default (but it was always droping)
After changing to 3G no more problems. Have you tried this?
P.S. I never tried to solve the 4G issue but probably I need to change APN settings.
Click to expand...
Click to collapse
Mine doesn't even recognize the network. Can't even search for it manually. I reflashed the KDZ and flashed the baseband still no network :\
Don't understand what you mean... after reboot you get any message? What do you have in status bar? the red cross over the signal icon?
That what I was getting...
You can't go to setting - more - mobile networks - network operators and seach networks? Why, it's grey?
rimsilva said:
Don't understand what you mean... after reboot you get any message? What do you have in status bar? the red cross over the signal icon?
That what I was getting...
You can't go to setting - more - mobile networks - network operators and seach networks? Why, it's grey?
Click to expand...
Click to collapse
Yeah I;m getting the red cross. When I was in CM 11, I tried searching for networks manually but it would just be a loop. So I reflashed the LGF180S KDZ and I am back to stock. Still I have the red cross and the stock rom does not allow to search for networks manually.
neaznc021 said:
Yeah I;m getting the red cross. When I was in CM 11, I tried searching for networks manually but it would just be a loop. So I reflashed the LGF180S KDZ and I am back to stock. Still I have the red cross and the stock rom does not allow to search for networks manually.
Click to expand...
Click to collapse
I'm with E975 stock ROM and I have the options to search network, as I mention above and you should have too.
The problem here could be that it's grey and you are not allowed to do it, but the option is there, is that your case?
I'm not sure if I had that before (you know so many flashes...) but I've always solved my issues by restoring to a previous works ROM. I remember that I got GPS issues too and I restore a ROM backup.
I believe that I can't help more
flash baseband and you're done
and8eye said:
flash baseband and you're done
Click to expand...
Click to collapse
tried and didn't work...Had to flash e975 kdz and flash f180s modem through CWM
me also have the samr problem.where to het naseband?
Sent from my LG-E975 using xda app-developers app
This post may help yu... Use it as reference
http://forum.xda-developers.com/showthread.php?p=47101752
Sent from my LG-E975 powering Stock 4.1.2
first if you read a little and ask in the Vanir rom thread if you can't see which of the 2 roms are for your phone, you need to have the correct modem flashed to the rom aswell, plus using the right APN's or else you can have network trouble.
i am running stock CM11 on my own E975 and it don't have any mobile network when i do a reboot or a cold boot, but then i go in and search for network and all networks in my country shows up, and i just choose the one i want and i get 3g/4g LTE no problem there
Hello!
I have m919 T-Mobile Galaxy s4 but I'm with other carrier (Wind Canada). I rooted the phone about a month ago, I believe, using THIS guide.
I spent yesterday in environment where I didn't had coverage for most of the day, but i haven't gotten it back yet. Sounds really weird as it might be not connected to the fact at all. I have 4G connection active, which means that I have internet, but it keeps 'searching' for service and I can't Call/Text anyone, neither I can receive calls or texts. Instead of the bar at the top showing how good coverage i have it just shows a crossed out circle icon.
I've tried reboots, keeping my phone off for 30mins without battery, taking out sim and putting it back in, changing network modes and resetting APN (all from settings panel).
Have anyone experienced something like that and how do I fix it? It was working perfectly for last couple of months and the phone didn't get any damage yesterday neither.
P.S Did the the regular factory reset (don't know if it affects rooting) but it didn't change anything. =
I have same problem.
Did you solve it? and how?
Haven't solved it, that was the whole point of my post!
kokozaurs said:
Haven't solved it, that was the whole point of my post!
Click to expand...
Click to collapse
Never had this happen to me. Data works off your signal, something is wickedly wrong. I'd flash the modem again if you are on 4.2.2 bootloader (doesn't matter which rom or android version). If that fails, go intonrecovery, wipe cache, wipe dalvik cache, and wipe data. If that fails, backup your data and Odin flash back to 100% stock. If that fails, more than likely your /efs folder was corrupted.
Sent from my SGH-M919 using XDA Premium 4 mobile app
Please don't create multi thread on the same topic
xdapowerapps said:
Never had this happen to me. Data works off your signal, something is wickedly wrong. I'd flash the modem again if you are on 4.2.2 bootloader (doesn't matter which rom or android version). If that fails, go intonrecovery, wipe cache, wipe dalvik cache, and wipe data. If that fails, backup your data and Odin flash back to 100% stock. If that fails, more than likely your /efs folder was corrupted.
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I think I'm gonna flash it back to 100% stock, but the problem is that I'm on mac and I don't know how to flash it back. Is there any guide on how to do it from MAC platform?
Thanks!!
kokozaurs said:
I think I'm gonna flash it back to 100% stock, but the problem is that I'm on mac and I don't know how to flash it back. Is there any guide on how to do it from MAC platform?
Thanks!!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=755265
http://forums.techdiscussion.in/sho...Heimdall-Terminal-on-Mac-OS-(Odin-Alternative)
Second one will be more helpful. Good luck! :good:
xdapowerapps said:
http://forum.xda-developers.com/showthread.php?t=755265
http://forums.techdiscussion.in/sho...Heimdall-Terminal-on-Mac-OS-(Odin-Alternative)
Second one will be more helpful. Good luck! :good:
Click to expand...
Click to collapse
Ok, so I got heimdall, and got the recovery.img from the other topic. I followed the steps that was provided in the second link, but nothing much changed, it successfully uploaded the recovery.img, then i did recovery boot with power button + home button + volume up, it did some things with a pirate android guy in the back and thats it, booted up. Not sure if I have everything back to stock or not - either way, the issue with the network hasn't been resolved!
kokozaurs said:
Haven't solved it, that was the whole point of my post!
Click to expand...
Click to collapse
Tried this?
go to settings/more networks/Mobile networks/Network operators/Search now......
It might take a minute or two, then show you some networks it finds. Select your provider and it should list some options for you.
need to see Mobile data with a check, Data roaming checked, network mode should be LTE/GSM/WCDMA(auto connect)
If you KNOW what your APN (access Point Name) is you can check if it's correctly there.
It usually is downloaded with the search for network so just try with whatever is ther for now.
Back all the way out, and power off. Take out the battery, wait like 30 seconds, replace the battery and power on again.
See if you get service and can dial out.
Aloha and Good Luck!
bobolinko said:
Tried this?
go to settings/more networks/Mobile networks/Network operators/Search now......
It might take a minute or two, then show you some networks it finds. Select your provider and it should list some options for you.
need to see Mobile data with a check, Data roaming checked, network mode should be LTE/GSM/WCDMA(auto connect)
If you KNOW what your APN (access Point Name) is you can check if it's correctly there.
It usually is downloaded with the search for network so just try with whatever is ther for now.
Back all the way out, and power off. Take out the battery, wait like 30 seconds, replace the battery and power on again.
See if you get service and can dial out.
Aloha and Good Luck!
Click to expand...
Click to collapse
yep, one of first routines i tried. No difference
kokozaurs said:
yep, one of first routines i tried. No difference
Click to expand...
Click to collapse
Ok, now you might want to call your provider and ask them to remove you from their network and reinsert you again. That procedure will often re-enable normal operation of cellular connectivity.
They will ask you to power down and remove your battery for about a minute, then power up again.
Aloha and Good Luck!
Tried it all
Well im in the same boat here.
I checked the IMEI is correct
i did a full stock MK5 install with Odin without sim inserted and with
*#2263# helps it recognizes the network on the search list (WIND)
but it wont connect (failed to connect try again)
sometimes it connects to 4G and i can use the web
but no calls or sms
i noticed i dont have LTE enabled which ill do tomorrow
i even opened my phone to check that no cables came off as it was in service for a broken screen
tried a different sim from koodo wich also acts weird it connects to data but wont make phone calls or sms
the problems began after its been UNLOCKED (sim free)
any suggestions? im willing to try anything
its been in service 4 times and still they cant figure it out...
thanks!
ph3r0c1ty said:
Well im in the same boat here.
I checked the IMEI is correct
i did a full stock MK5 install with Odin without sim inserted and with
*#2263# helps it recognizes the network on the search list (WIND)
but it wont connect (failed to connect try again)
sometimes it connects to 4G and i can use the web
but no calls or sms
i noticed i dont have LTE enabled which ill do tomorrow
i even opened my phone to check that no cables came off as it was in service for a broken screen
tried a different sim from koodo wich also acts weird it connects to data but wont make phone calls or sms
the problems began after its been UNLOCKED (sim free)
any suggestions? im willing to try anything
its been in service 4 times and still they cant figure it out...
thanks!
Click to expand...
Click to collapse
Ok I found the solution. Apparently I have bought a stolen phone. Check the imei if it hasn't been blacklisted!