Related
I have a kindle fire with no OS, it has TWRP recovery and I was trying to wipe android 4.0 from it and re install 6.2.2 but I accidentally deleted the OS and any hope of re installing it. I cannot communicate with the device whatsoever using kindle utility or Kindle fire unbricker. I played with the drivers for awhile in device manager to no avail. it currently sits in 'Disk Drives' as Amazon Kindle USB device but I cannot put anything on it because it it's showing up as a proper driver or w/e. when I turn it on I get what I believe is the firefirefire triangle and if I choose to I can access TWRP, but when I left it fully boot I get a black lighting. Any help is extremely appreciate. I did look around for a bit before posting my question and found nothing that fit my problem but if there is such a thread I'm sorry I posted an unnecessary one.
have you tried mounting your kindle in twrp if you can then just flash a new ROM and you should be good to go
Sent from my CM9 LG G2X using Tapatalk
I thought I already tried that but I went back and fiddle with a few settings and got access to my kindle, I went looking for the kindle 6.2.2 stock rom and couldn't find a download, I need to find a stock download because brother plans on selling this kindle, I'm only helping because I was the one who rooted and put android 4.0 on there.
TLR; Where can I get kindle fire stock rom at?
One does not simply delete an entire OS.... ;~;
http://forum.xda-developers.com/showthread.php?t=1399072
Bacondroid said:
One does not simply delete an entire OS.... ;~;
Click to expand...
Click to collapse
Lol one does simply delete an entire is. I made this same mistake and had to push a is to my kindle while in fastboot mode through adb. Took awhile for me to think of it but it finnally worked and I fixed it.
Sent from my Kindle Fire using Tapatalk
OK, My command prompt can't find my kindle fire as listed devices. I really need help! Plus, there is no exclamation point (!) all it lists is the Android ADB thing. How do I get it to find the device
threed42 said:
OK, My command prompt can't find my kindle fire as listed devices. I really need help! Plus, there is no exclamation point (!) all it lists is the Android ADB thing. How do I get it to find the device
Click to expand...
Click to collapse
This has literally nothing to do with the topic you posted in. Take a step back and do a little research before posting. You'll much likely be better off if you know what's going on.
I suggest you start here:
http://forum.xda-developers.com/showpost.php?p=25884555
soupmagnet said:
This has literally nothing to do with the topic you posted in. Take a step back and do a little research before posting. You'll much likely be better off if you know what's going on.
I suggest you start here:
http://forum.xda-developers.com/showpost.php?p=25884555
Click to expand...
Click to collapse
I mean, I got there, but there is no OS installed on my kindle fire
Okay, I realize I tend to come off a little "jerky" sometimes, but I really am trying to help. When you hijack a thread that's several months old and post a problem that seemingly has nothing to do with the OP, only to later reveal that there is much more to your problem (even after being suggested to do it differently), it makes other people that would normally be willing to help, think twice about getting involved. Nobody wants to have to ask 50 different questions to get to the root of the problem. You need to realize that the people who would help, probably don't want to do more work than absolutely necessary. And you should be respectful of that if you want some quality assistance from the people who might be able to solve your problem.
So once again, and respectfully, I suggest you click on the link I gave you, read it, do any suggested research and follow the directions given in the post.
Hey I'm having the same problem. I tried to root my kinble fire and accidentilly wiped the stockos off it but I have TWRP on the device, however I am not able to mount the device using twrp to put a ROM on the device to boot to. Any help getting the device to be recognized by the computer and mounting it would be a great help and any other info about installing a ROM to my kindle would also be a big help.
jgrun8732 said:
Hey I'm having the same problem. I tried to root my kinble fire and accidentilly wiped the stockos off it but I have TWRP on the device, however I am not able to mount the device using twrp to put a ROM on the device to boot to. Any help getting the device to be recognized by the computer and mounting it would be a great help and any other info about installing a ROM to my kindle would also be a big help.
Click to expand...
Click to collapse
[Edit:] Have you looked into SoupKit?
soupmagnet said:
[Edit:] Have you looked into SoupKit?
Click to expand...
Click to collapse
I actually figured everything out about 2 hours after my post. In order to get the Kindle recognized by my pc I had to change it over to USB composite device then I was able to load a ROM on it and I am now enjoying jelly bean 4.1 on the kindle now. I have not been able to restore the kindle os but I am assuming that if I look long enough for the kernal and firmware I will be able to restore it. Not that I have any plans to seeing as I have a dedicated android tablet now that does everything I want it and need to do anyways, I read on the kindle for like 3 months when it first came out, not worried about reading on it any more besides there's an app for it. Anyways thanks for the reply.
Hi, sorry if it is bad manners to post in threats months old but I am also having a similar problem with my kindle fire.
Today I spent hours rooting it and trying to get the google play store to work on it - all in a dangerously haphazard manner. It was really reckless of me.
Somewhere in the process I used KFU 0.9.9 after restoring to stock and re-rooting, then after a reboot the OS would't show up. it seemed like it loaded and everything but I couldn't see anything after it loaded past TWRP. I wiped system, and now am without an OS and only TWRP to use.
Some details:
Mounting works
Flashing stock is NOT WORKING. This is my main problem. I don't know any other method of restoring an OS; I do not know how sideloading with ADB works, or if that would help at all.
Much apologies in advanced for my juvenile-ty
thanks
DJLamontagneIII said:
have you tried mounting your kindle in twrp if you can then just flash a new ROM and you should be good to go
Sent from my CM9 LG G2X using Tapatalk
Click to expand...
Click to collapse
I count believe I was forgetting to mount Thanks
I know this thread is old and i apologize if this is the wrong place for me to post.
I'm in a similar situation, no os can access twrp and mount but my computer wants me to format. What can I do at this point?
thanks
iamchaos said:
I know this thread is old and i apologize if this is the wrong place for me to post.
I'm in a similar situation, no os can access twrp and mount but my computer wants me to format. What can I do at this point?
thanks
Click to expand...
Click to collapse
figured it out formatted and was able to load rom and flash.
Thanks
No idea What I need to do
I have a kindle fire with no OS, it has TWRP recovery and I was trying to wipe android 4.0 from it and re install 6.2.2 but I accidentally deleted the OS and any hope of re installing it. I cannot communicate with the device whatsoever using kindle utility or Kindle fire unbricker. I played with the drivers for awhile in device manager to no avail. it currently sits in 'Disk Drives' as Amazon Kindle USB device but I cannot put anything on it because it it's showing up as a proper driver or w/e. when I turn it on I get what I believe is the firefirefire triangle and if I choose to I can access TWRP, but when I left it fully boot I get a black lighting. Any help is extremely appreciate. I did look around for a bit before posting my question and found nothing that fit my problem but if there is such a thread I'm sorry I posted an unnecessary one.
Csnoopy35 said:
I have a kindle fire with no OS, it has TWRP recovery and I was trying to wipe android 4.0 from it and re install 6.2.2 but I accidentally deleted the OS and any hope of re installing it. I cannot communicate with the device whatsoever using kindle utility or Kindle fire unbricker. I played with the drivers for awhile in device manager to no avail. it currently sits in 'Disk Drives' as Amazon Kindle USB device but I cannot put anything on it because it it's showing up as a proper driver or w/e. when I turn it on I get what I believe is the firefirefire triangle and if I choose to I can access TWRP, but when I left it fully boot I get a black lighting. Any help is extremely appreciate. I did look around for a bit before posting my question and found nothing that fit my problem but if there is such a thread I'm sorry I posted an unnecessary one.
Click to expand...
Click to collapse
it's not broken, you have twrp,
don't use kfu or unbricker
what version of twrp?
Sent from my KFFOWI using XDA Labs
I have the newest version I think?
sd_shadow said:
it's not broken, you have twrp,
don't use kfu or unbricker
what version of twrp?
Sent from my KFFOWI using XDA Labs
Click to expand...
Click to collapse
I rooted my fire a couple weeks ago. Used the KFU and everything worked perfectly. I have the android marketplace. I even downloaded the OTA something that allows you to temporally disable so I can still watch prime videos.
But tonight it powered off on its own and got stuck on the yellow triangle screen. I tried using the KFU and change it to normal boot mode. which seemed to work. It got to the Kindle fire screen and booted up. As soon as the carousel popped up it shutdown immediately and got stuck on the yellow triangle screen. It keeps doing this. Any ideas.
I tried reading many of the other threads, but I got majorly confused. So any help is appreciated. Thanks
edit: I noticed i had a few seconds before it would shutdown on me. I was able to open OTA rootkeeper and turn the root back on before it shutdown. As soon as I click restore root, it shutdown again, but it booted up fine. Im thinking the issue was caused by the root temporally being disabled. Is this a known problem. Seems to be working fine, will update tomorrow.
Edit: seems I have to changed it no normal boot everytime. Is there a way to unroot my fire. Hopefully its not too complicated.
Thanks for anything guys.
And I think the root is disabled at the moment, but not a %100 sure. NOt sure if that matters.
Mine's doing the same thing. I think it has something to do with the new OTA update? Mine will start up then reboot into recovery...any thoughts guys?
I'd start here, since it appears many others had similar problems with the OTA push:
http://forum.xda-developers.com/showthread.php?t=1634075&page=2
Supposedly KFU rooting still works. You may need to try this method again. Check this thread and see what others had to say as far as what worked for them. Good luck!
How do I unroot it completely. Its still getting stuck on yellow triangle. I used it for 30 minutes last night. Now unless I make it boot up normally, it gets stuck. getting frustrated.
Now when I use KFU to start it in normal mode, it gets to the Kindle fire screen, and occasionally the screen where I typed in my code to unlock it and it turns off, black screen, It will only turn on when plugged in.
edit: I guess my battery somehow died overnight. Swear it was full when I went to bed
Would updating my fire with the usb get rid of the root? I just want it back to normal. What is easiest way to do that?
Now its stuck on this cycle where it says theres an error and the kindle fire must reset to its original factory settings its does this. Reboots I think and does it again. Its stuck like this.
To break root and restore everything back to original:
http://forum.xda-developers.com/showthread.php?p=25681034
soupmagnet said:
To break root and restore everything back to original:
http://forum.xda-developers.com/showthread.php?p=25681034
Click to expand...
Click to collapse
Thanks but I cant get out of the cycle of what I said in my last post. I think my Fire is broken for good.
Can you boot into recovery? Do you know how?
soupmagnet said:
Can you boot into recovery? Do you know how?
Click to expand...
Click to collapse
I was able to before. My computer doesn't recognize the Kindle anymore
Guess I will be buying a new one.
TURBO1112 said:
I was able to before. My computer doesn't recognize the Kindle anymore
Click to expand...
Click to collapse
Your computer doesn't need to be recognized by the computer to boot into recovery.
soupmagnet said:
Can you boot into recovery? Do you know how?
Click to expand...
Click to collapse
I *think* I'm having the same issue. When the fire is not plugged in, it's a black screen. No method of pressing the power button does anything (length of time, number of times, etc.). When it IS plugged in, the standard kindle fire/android logo just blinks. Again, power button has no effect whatsoever.
KFU shows ADB offline and Boot unknown.
Just some background info, I had a rooted working Fire. Out of the blue (likely the OTA update) it got stuck at the triangle logo screen and was able to get it into recovery mode. The first time I just reset it to factory.
Rooted again using KFU, said successful root, but installing Google apps kept saying failed or error until finally saying "All done!"
Then tried to install TWRP, and KFU got stuck at trying to put the fire into fast boot mode then <waiting for device>. Recovery screen came up again, and (here's where I made a bonehead decision) figuring I would help things along, I selected fast boot mode. It was stuck on the kindle fire screen for hours. I even tried reinstalling the drivers but that failed. I left it plugged in to my PC and when I woke up this morning I found it in the state it is in now that I first described above.
I will continue to search more threads for an answer, but if I don't update this one that I've found one, it means I haven't.
fzdolfan said:
I *think* I'm having the same issue. When the fire is not plugged in, it's a black screen. No method of pressing the power button does anything (length of time, number of times, etc.). When it IS plugged in, the standard kindle fire/android logo just blinks. Again, power button has no effect whatsoever.
KFU shows ADB offline and Boot unknown.
Just some background info, I had a rooted working Fire. Out of the blue (likely the OTA update) it got stuck at the triangle logo screen and was able to get it into recovery mode. The first time I just reset it to factory.
Rooted again using KFU, said successful root, but installing Google apps kept saying failed or error until finally saying "All done!"
Then tried to install TWRP, and KFU got stuck at trying to put the fire into fast boot mode then . Recovery screen came up again, and (here's where I made a bonehead decision) figuring I would help things along, I selected fast boot mode. It was stuck on the kindle fire screen for hours. I even tried reinstalling the drivers but that failed. I left it plugged in to my PC and when I woke up this morning I found it in the state it is in now that I first described above.
I will continue to search more threads for an answer, but if I don't update this one that I've found one, it means I haven't.
Click to expand...
Click to collapse
The "blinking" boot logo is indicative of a dead battery, probably caused by leaving it in fastboot mode for so long.
http://forum.xda-developers.com/showthread.php?p=25400963
http://www.droidforums.net/forum/droid-labs/146492-how-why-make-your-own-motorola-factory-cable.html
http://forum.xda-developers.com/showthread.php?p=20317299
Your best bet is to follow the first link and do what you can to install FFF1.4 and that will allow you to charge your battery from such a low power state.
You'll have to use the fastboot flash command for this so be sure that the file you use to flash your bootloader is in a .bin format. Simply renaming a .zip to .bin will not work. You have to extract the u-boot.bin from the FFF1.4.zip, otherwise you will hard-brick your device. If you're unsure of what you're doing, ask for help.
On the chance you can't get FFF1.4 installed, you'll need to acquire a factory cable to keep the device powered on long enough to install your bootloader.
Another user recently had a problem that required a factory cable to fix. Take a look at that thread so you have an idea of what needs to be done and how to fix your problem. His problem was different from yours but the solution is the same. http://forum.xda-developers.com/showthread.php?p=25693109
soupmagnet said:
The "blinking" boot logo is indicative of a dead battery, probably caused by leaving it in fastboot mode for so long.
http://forum.xda-developers.com/showthread.php?p=25400963
http://www.droidforums.net/forum/droid-labs/146492-how-why-make-your-own-motorola-factory-cable.html
http://forum.xda-developers.com/showthread.php?p=20317299
Your best bet is to follow the first link and do what you can to install FFF1.4 and that will allow you to charge your battery from such a low power state.
You'll have to use the fastboot flash command for this so be sure that the file you use to flash your bootloader is in a .bin format. Simply renaming a .zip to .bin will not work. You have to extract the u-boot.bin from the FFF1.4.zip, otherwise you will hard-brick your device. If you're unsure of what you're doing, ask for help.
On the chance you can't get FFF1.4 installed, you'll need to acquire a factory cable to keep the device powered on long enough to install your bootloader.
Another user recently had a problem that required a factory cable to fix. Take a look at that thread so you have an idea of what needs to be done and how to fix your problem. His problem was different from yours but the solution is the same. http://forum.xda-developers.com/showthread.php?p=25693109
Click to expand...
Click to collapse
Even after reading the posts regarding the factory cable, I'm still not sure what the difference is. I have been (successfully) using a Motorola Android phone cable that when plugged into the Fire (when it was working) would say that USB is connected and I can now transfer files. I also successfully rooted it once before and installed all the apps and such with the KFU. What would be different that would make this cable only now insufficient?
Btw, I was able to charge it using the stock wall charger. At least I assume it is charged because it is no longer blinking the kindle fire logo, and I am able to shut it down by holding the power button even when plugged into the USB cable.
However, it still won't do anything but show the android/kindle fire logo (static, not flashing/oscillating) whether it's turned on with or without a cable plugged in. Opening the KFU and trying boot modes does nothing. There is no acknowledgment whatsoever that it is connected to the PC either from the fire or the PC. I don't even get the sound effect from the PC that something has been connected via USB.
fzdolfan said:
Even after reading the posts regarding the factory cable, I'm still not sure what the difference is. I have been (successfully) using a Motorola Android phone cable that when plugged into the Fire (when it was working) would say that USB is connected and I can now transfer files. I also successfully rooted it once before and installed all the apps and such with the KFU. What would be different that would make this cable only now insufficient?
Btw, I was able to charge it using the stock wall charger. At least I assume it is charged because it is no longer blinking the kindle fire logo, and I am able to shut it down by holding the power button even when plugged into the USB cable.
However, it still won't do anything but show the android/kindle fire logo (static, not flashing/oscillating) whether it's turned on with or without a cable plugged in. Opening the KFU and trying boot modes does nothing. There is no acknowledgment whatsoever that it is connected to the PC either from the fire or the PC. I don't even get the sound effect from the PC that something has been connected via USB.
Click to expand...
Click to collapse
A "factory cable" is specially made to interact with the device in a way that is different from the OEM Motorola USB cable you are currently using. With a little research and a little more reading you'll be able to find out what the difference is and why it works for fixing dead battery issues.
Using the stock charger was one of the very first things covered in the first link that I gave you. I'm trying to help you fix your problem so please try to pay attention to the information I'm giving you.
So now that your battery issue is resolved, you have to fix the next part of the problem which is resetting your bootmode. By far the easiest way to do this is by flashing the latest 1.4 version of FireFireFire in recovery. Be sure to use recovery to install it or you may find yourself in more trouble than you started.
The thread for the new version along with important information on how to install and use it can be found here: http://forum.xda-developers.com/showthread.php?t=1632375
soupmagnet said:
Using the stock charger was one of the very first things covered in the first link that I gave you.
Click to expand...
Click to collapse
I realize that, and I acknowledged it in my post by stating that it solved the drained battery issue. I also gave thanks on your post.
Accusing me of not paying attention is not necessary.
I only said that I don't see the difference in the factory cable because a) my drained battery was resolved by other means and b) I did read in the factory cable thread that "Seems like you have power and this cable is maininly for when your ... battery is dead and you need to ... fastboot with no battery life left.... So the cable does not matter in your case since your battery has power you can use any usb cable."
soupmagnet said:
So now that your battery issue is resolved, you have to fix the next part of the problem which is resetting your bootmode. By far the easiest way to do this is by flashing the latest 1.4 version of FireFireFire in recovery. Be sure to use recovery to install it or you may find yourself in more trouble than you started.
The thread for the new version along with important information on how to install and use it can be found here: http://forum.xda-developers.com/showthread.php?t=1632375
Click to expand...
Click to collapse
I also looked at this thread, but the initial post seems to imply that I already know how to "Apply this flash.zip from recovery just like any other ROM or kernel .zip file.", which I do not.
As I said, my fire is currently stuck at the kindle fire logo and does not respond to being plugged in to the PC (other than turning on to the kindle fire screen).
Admittedly, I only went about 4 pages deep into the thread, but it seemed to be all posts of thanks (for the most part) to the original post. I will continue reading the thread if you're saying that it indeed contains more helpful information.
I apologize if my post came across as ignorant or lazy, but the fact is that I've been researching this for the better part of the day, and I see plenty of info on what to do if I can get my PC to communicate with my Fire, but the first problem is that I cannot find out how to hurdle that first very important obstacle.
Just to save us both some time (and I do appreciate your patience and willingness to help), are you saying that I need a factory cable regardless of the state of the battery? Because if that's the case, then my first priority is to figure out how to get one, because my knowledge, means, and experience in soldering and inner workings of electronics is zero, so making one myself is not an option.
Forgive my impatience but playing twenty questions with other, less motivated to learn users, gets kind of old after a while (not to say that you fall into that category). Not to mention, I'm a prick and have very little patience to begin with.
With a good charge on your battery there is no longer a need for a factory cable.
Most of the users here are fairly proficient with the use of recovery so its easy to overlook those who aren't. That's why it's important to know up front what your level of experience is, to avoid such assumptions.
Your recovery (TWRP or CWM) has a mount function for mounting certain partitions as external drives onto your computer. Your computer will recognize it in the same way it does a thumb drive. Use it to mount your sdcard and transfer the FFF1.4 so it can be installed while in recovery.
Once installed, reboot and hold the power button as if you were trying to enter recovery again and you will be able to select which mode to boot with. Choose "Normal Boot".
Hello, I bricked my kindle fire by flashing a update.zip file because I wanted to return to stock. I wiped everything from cache to system and now my Kindle Fire just hangs on the KF screen.
I tried using KFU, FireKit, and I can get into adb but I can't access the adb shell and I can not get into fastboot.
Any help would be appreciated. And I don't know if my battery is even charging either. The battery is dead. Thanks.
I'm having the same problem except I soft bricked mine. :c It doesn't even show up on ADB.
I literally just had this exact problem, and the ONLY thing that actually worked was buying a factory cable from SKORPN. After I got it, all I had to do was plug it in and used the Kindle fire utility to install FIREFIREFIFE and boom, it worked like a charm.
Sent from my Amazon Kindle Fire using xda premium
Mine doesn't even show up on my PC or ADB [Kindle Fire Utility]. What should I do? :c Point me to a utility that will fix it?
Joey117225 said:
Mine doesn't even show up on my PC or ADB [Kindle Fire Utility]. What should I do? :c Point me to a utility that will fix it?
Click to expand...
Click to collapse
Even if your computer won't recognize the Kindle fire, it won't matter. The factory cable made by SKOPRN is specially made for your computer to recognize it, but it won't say that it has recognized it. By the way, there is no utility that will unbrick your fire, and trust me I have tried. The only thing that actually worked was buying a factory cable. It's only 12-13 dollars and if your fire ever gets bricked again, the cable will save the day. Almost always.
Pls try reinstalling the drivers.. I have attached the steps below: It should help
1) Download KFU from this link http://forum.xda-developers.com/show....php?t=1399889
2) Before you start rooting ur device.. do the below
3) Extract the util.. run the install_drivers.bat.. this will help you install the drivers..
4) Once it is successfully done..follow the steps outlined in the document attached below (install drivers for ur kindle.docx)
5) Next step is to root ur device and install the google framework and market
6) To root your device.. run run.bat.. select option 2 to install the root.. it might take sometime and will restart the kindle and notify you
7) to install the google apps..run option 6 and then select 1.. sit back and watch the magic happen
kishorev said:
Pls try reinstalling the drivers.. I have attached the steps below: It should help
1) Download KFU from this link http://forum.xda-developers.com/show....php?t=1399889
2) Before you start rooting ur device.. do the below
3) Extract the util.. run the install_drivers.bat.. this will help you install the drivers..
4) Once it is successfully done..follow the steps outlined in the document attached below (install drivers for ur kindle.docx)
5) Next step is to root ur device and install the google framework and market
6) To root your device.. run run.bat.. select option 2 to install the root.. it might take sometime and will restart the kindle and notify you
7) to install the google apps..run option 6 and then select 1.. sit back and watch the magic happen
Click to expand...
Click to collapse
I did all that, besides I can't get past step 2 because it says ADB is offline. Even with the drivers installed it shows up on the computer. What am I doing wrong
EDIT: I got it to activate ADB but still won't go on fastboot or anything. Atleast I got somewhere but now what? It won't even start up lmao. Why did I ever have to install CM9 on my device without installing FireFireFire
EDIT again: LOL I just broke it even more now it doesn't get past the Kindle fire screen, now what? Atleast I have a reason to take it to best buy now, the last time I went I said it was a hardware issue, now I can say it won't get past the kindle fire screen. Maybe I can take it back there and see if they can do anything xD
EDIT again: Good news, it's broken enough to get a new one! So I'm gonna get a refund and see how this goes c;
EDIT: Fixxed it without returning. No worries
Joey11746 said:
I did all that, besides I can't get past step 2 because it says ADB is offline. Even with the drivers installed it shows up on the computer. What am I doing wrong
EDIT: I got it to activate ADB but still won't go on fastboot or anything. Atleast I got somewhere but now what? It won't even start up lmao. Why did I ever have to install CM9 on my device without installing FireFireFire
EDIT again: LOL I just broke it even more now it doesn't get past the Kindle fire screen, now what? Atleast I have a reason to take it to best buy now, the last time I went I said it was a hardware issue, now I can say it won't get past the kindle fire screen. Maybe I can take it back there and see if they can do anything xD
EDIT again: Good news, it's broken enough to get a new one! So I'm gonna get a refund and see how this goes c;
Click to expand...
Click to collapse
EDIT: Leave the new one stock.lol
EDIT again: Leave the new one stock.lol
Sent from my Amazon Kindle Fire using xda app-developers app
Joey11746 said:
I did all that, besides I can't get past step 2 because it says ADB is offline. Even with the drivers installed it shows up on the computer. What am I doing wrong
EDIT: I got it to activate ADB but still won't go on fastboot or anything. Atleast I got somewhere but now what? It won't even start up lmao. Why did I ever have to install CM9 on my device without installing FireFireFire
EDIT again: LOL I just broke it even more now it doesn't get past the Kindle fire screen, now what? Atleast I have a reason to take it to best buy now, the last time I went I said it was a hardware issue, now I can say it won't get past the kindle fire screen. Maybe I can take it back there and see if they can do anything xD
EDIT again: Good news, it's broken enough to get a new one! So I'm gonna get a refund and see how this goes c;
Click to expand...
Click to collapse
Just so you know, your device was never "broken". You just don't know what you're doing. But I agree with the previous post. Until you have a better idea of how the Kindle Fire works, leave it stock.
---------- Post added at 04:25 PM ---------- Previous post was at 04:19 PM ----------
[Edit:] And this constant practice of breaking one's own device and sending them back to Amazon despite knowing that it violates the terms of the warranty, is probably one of the biggest reasons Amazon locked down the new Kindle Fire HDs and probably every subsequent device moving forward.
The old saying, "You made your bed, now sleep in it", definitely applies here.
I rooted my Kindle Fire 2 about a week ago and I was really enjoying it. Today I decided that I wanted to get cyanogen mod on my kindle. I went to a a forum page here on XDA which had a one click thing for TWRP. I downloaded it onto my kindle and started to install it. I allowed it with superuser, but then my screen went black and turned red. Now I'm kind of nervous because I've read that now I need to use a Factory/Fastboot cable to restore it. Is there any other way for me to restore my kindle? I can turn it off by holding the power button for 20 secs, but when I turn it back on the logo flashes for 2 secs and the red screen comes back.. Please help.. I'm kinda upset right now
No. You need a cable. Sorry you are upset but this is clearly stated in the CyanogenMod thread.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
mindmajick said:
No. You need a cable. Sorry you are upset but this is clearly stated in the CyanogenMod thread.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Ok, so if I purchase the cable, will that allow me to enter fastboot and fix the problem? Is fastboot somthing that is already on the device.. or is it something that I should of installed on it beforehand? Someone told me that all I need is the Factory Cable and I can work from there. Is that true?
You might want to start reading before you permanently brick your device
Start here:
http://forum.xda-developers.com/showthread.php?t=2228539
The "someone" is correct... But save yourself somw hassle and read everything you can while waiting for your cable.
See XDA rule #1
--
Sent from my mind to your screen.
mindmajick said:
You might want to start reading before you permanently brick your device
Start here:
http://forum.xda-developers.com/showthread.php?t=2228539
The "someone" is correct... But save yourself somw hassle and read everything you can while waiting for your cable.
See XDA rule #1
--
Sent from my mind to your screen.
Click to expand...
Click to collapse
I'm sorry, I know im asking dumb questions; honestly I'm new to this and I just need some help and I do appreciate the help you are providing. I have read the link you posted, but I have one more question. When I plug in the Factory Cable is fastboot something that is already on the device? I dont think I installed fastboot on my device (if it can even be installed) But I know for a fact that my KF2 is rooted. I know this is a dumb question, but the only way for me to find out is if I ask. Thanks.
https://www.google.com/webhp?client...rce=hp&q=what+is+fastboot&oq=what+is+fastboot
--
Sent from my mind to your screen.
TruElement said:
I rooted my Kindle Fire 2 about a week ago and I was really enjoying it. Today I decided that I wanted to get cyanogen mod on my kindle. I went to a a forum page here on XDA which had a one click thing for TWRP. I downloaded it onto my kindle and started to install it. I allowed it with superuser, but then my screen went black and turned red. Now I'm kind of nervous because I've read that now I need to use a Factory/Fastboot cable to restore it. Is there any other way for me to restore my kindle? I can turn it off by holding the power button for 20 secs, but when I turn it back on the logo flashes for 2 secs and the red screen comes back.. Please help.. I'm kinda upset right now
Click to expand...
Click to collapse
i have the problem two days ago and i was crazy about that, but i did a factory cable
Red Screen Fixed !!!!
TruElement said:
I rooted my Kindle Fire 2 about a week ago and I was really enjoying it. Today I decided that I wanted to get cyanogen mod on my kindle. I went to a a forum page here on XDA which had a one click thing for TWRP. I downloaded it onto my kindle and started to install it. I allowed it with superuser, but then my screen went black and turned red. Now I'm kind of nervous because I've read that now I need to use a Factory/Fastboot cable to restore it. Is there any other way for me to restore my kindle? I can turn it off by holding the power button for 20 secs, but when I turn it back on the logo flashes for 2 secs and the red screen comes back.. Please help.. I'm kinda upset right now
Click to expand...
Click to collapse
i just fixed mine it had a red screen I tried everything....but what worked was the kindle fire first aide...YAY!!!!!
i flashed to 10.2.3 and and rooted it's all good....but you gotta use a fastboot cable...SWEET!!!!
bigrob504 said:
i just fixed mine it had a red screen I tried everything....but what worked was the kindle fire first aide...YAY!!!!!
i flashed to 10.2.3 and and rooted it's all good....but you gotta use a fastboot cable...SWEET!!!!
Click to expand...
Click to collapse
sent you PM if you got it.. needing some help.... thanks!
mistaanime said:
sent you PM if you got it.. needing some help.... thanks!
Click to expand...
Click to collapse
Okay you need factory cable it's really the fastboot cable..got mine from ebay bout $5...download kindle fire first aide...
download and install sdk manager((google it).....plug your kindle to your computer....(with the fastboot cable your screen on the kindle should say fastboot)open the kindle fire first aide and run the RunMe.bat file...choose restore image and run the program....the program also lets you root your device again.....Hope I helped you
Here's a link for the cable and a guide
google this kindle fire hd fastboot cable from ebay
bigrob504 said:
Okay you need factory cable it's really the fastboot cable..got mine from ebay bout $5...download kindle fire first aide...
download and install sdk manager((google it).....plug your kindle to your computer....(with the fastboot cable your screen on the kindle should say fastboot)open the kindle fire first aide and run the RunMe.bat file...choose restore image and run the program....the program also lets you root your device again.....Hope I helped you
Here's a link for the cable and a guide
google this kindle fire hd fastboot cable from ebay
Click to expand...
Click to collapse
Do I have to have my own system image backup? I wasn't able to "adb pull" before all of this because it wouldn't give me r/w permissions due to something called a protective shell or something?
supergaara2 said:
Do I have to have my own system image backup? I wasn't able to "adb pull" before all of this because it wouldn't give me r/w permissions due to something called a protective shell or something?
Click to expand...
Click to collapse
It helps but you can use Kindle Fire FirstAid and a factory fastboot cord and restore to factory. http://forum.xda-developers.com/showthread.php?t=2096888 You can make a fastboot cord or buy one for 10 bucks, up to you.
He did a good job describing everything.
If you want to try getting custom recovery again, root your Kindle Fire using Bin4ry's method. Use the new method (No Xperia stuff - You'll know when u use it). And use Kindle Fire First Aid and disable OTA updates. Download TweezerMod Installer (Google it) and follow instructions. You will be as amazed, excited, and happy as at first when you recovered your kindle.
help me
bigrob504 said:
i just fixed mine it had a red screen I tried everything....but what worked was the kindle fire first aide...YAY!!!!!
i flashed to 10.2.3 and and rooted it's all good....but you gotta use a fastboot cable...SWEET!!!!
Click to expand...
Click to collapse
cam you help me to unbrick my kindle fire in red screen with kindle fire first aid please
I have installed 22 different driver packages. None work. My PC connects to all my phones so I don't think the problem is there. USB port 2.0. Brand new factory cable (gets fast boot) canyon have the driver pack that works? I can believe how many bs file I have downloaded.
Also, yes, I uninstalled each one after failure an deleted all associated files. Please help before my wife shoots me!!
whodisname said:
I have installed 22 different driver packages. None work. My PC connects to all my phones so I don't think the problem is there. USB port 2.0. Brand new factory cable (gets fast boot) canyon have the driver pack that works? I can believe how many bs file I have downloaded.
Also, yes, I uninstalled each one after failure an deleted all associated files. Please help before my wife shoots me!!
Click to expand...
Click to collapse
Turns out thing work better when you actually know what you are doing. But at leas I gained some knowledge. probably had the right drivers for a day and a half. Smh
Hey guys, I've been lurking pretty hard the past couple days and can't find a thread that addresses my question, so here goes:
I have a 1st gen Kindle Fire that I don't sue and wanted to put a ROM on it. I grabbed KFU v0.9.6, used the install drivers bat, then I believe I ran permanent root with superuser and TWRP recovery install. This all worked, I used TWRP to create a backup, restored my kindle to factory, and then I put the latest Cyanogenmod rom on it and installed that. This is the point that I'm at now, where I can start my kindle and it boots, but I can't get into recovery mode (I didn't install FireFireFire because I didn't know what it was) and so it boots from the kindle logo to Cyanogenmod, where it hangs as long as I keep it powered on. I've tried reinstalling drivers and running KFU in hopes I can get adb shell to recognize it, and although it does say it's "Online", the boot status is unknown, so it isn't able to reboot it, and adb shell just doesn't recognize it, although adb devices does.
I hope that all made sense, let me know if I need to elaborate on anything or post any screen shots, as I'd be glad to, I just don't know what you need. I'm hoping I haven't bricked it, and that there's some way to get the kindle file system recognized or something, but I haven't been able to figure it out on my own.
Thanks for the help, and again feel free to ask for any sort of info/screenshots.
(Windows 7 x64, Kindle Fire 1st Gen, KFU v0.9.6)
Never Mind
Try KFUBU.
I believe that its not bricked. Try using Kindle Fire Unbrick utility. Pretty neat and easy to use..
I think you should have installed FireFireFire and used the latest KFU, though. Just an opinion.
Anyways, try out the Unbrick Utility. I can't post links here as I'm a new member!
Hit "Thanks" if I helped!
Yea, that's what I figured. I think I had a tutorial from when KFU didn't need firefirefire? I could be making that up. Anyway, thanks for the idea, I'll hopefully try that in the next hour, otherwise I'll be back in a week since I'm gonna be out of town.
Thanks!