I rooted my fire a couple weeks ago. Used the KFU and everything worked perfectly. I have the android marketplace. I even downloaded the OTA something that allows you to temporally disable so I can still watch prime videos.
But tonight it powered off on its own and got stuck on the yellow triangle screen. I tried using the KFU and change it to normal boot mode. which seemed to work. It got to the Kindle fire screen and booted up. As soon as the carousel popped up it shutdown immediately and got stuck on the yellow triangle screen. It keeps doing this. Any ideas.
I tried reading many of the other threads, but I got majorly confused. So any help is appreciated. Thanks
edit: I noticed i had a few seconds before it would shutdown on me. I was able to open OTA rootkeeper and turn the root back on before it shutdown. As soon as I click restore root, it shutdown again, but it booted up fine. Im thinking the issue was caused by the root temporally being disabled. Is this a known problem. Seems to be working fine, will update tomorrow.
Edit: seems I have to changed it no normal boot everytime. Is there a way to unroot my fire. Hopefully its not too complicated.
Thanks for anything guys.
And I think the root is disabled at the moment, but not a %100 sure. NOt sure if that matters.
Mine's doing the same thing. I think it has something to do with the new OTA update? Mine will start up then reboot into recovery...any thoughts guys?
I'd start here, since it appears many others had similar problems with the OTA push:
http://forum.xda-developers.com/showthread.php?t=1634075&page=2
Supposedly KFU rooting still works. You may need to try this method again. Check this thread and see what others had to say as far as what worked for them. Good luck!
How do I unroot it completely. Its still getting stuck on yellow triangle. I used it for 30 minutes last night. Now unless I make it boot up normally, it gets stuck. getting frustrated.
Now when I use KFU to start it in normal mode, it gets to the Kindle fire screen, and occasionally the screen where I typed in my code to unlock it and it turns off, black screen, It will only turn on when plugged in.
edit: I guess my battery somehow died overnight. Swear it was full when I went to bed
Would updating my fire with the usb get rid of the root? I just want it back to normal. What is easiest way to do that?
Now its stuck on this cycle where it says theres an error and the kindle fire must reset to its original factory settings its does this. Reboots I think and does it again. Its stuck like this.
To break root and restore everything back to original:
http://forum.xda-developers.com/showthread.php?p=25681034
soupmagnet said:
To break root and restore everything back to original:
http://forum.xda-developers.com/showthread.php?p=25681034
Click to expand...
Click to collapse
Thanks but I cant get out of the cycle of what I said in my last post. I think my Fire is broken for good.
Can you boot into recovery? Do you know how?
soupmagnet said:
Can you boot into recovery? Do you know how?
Click to expand...
Click to collapse
I was able to before. My computer doesn't recognize the Kindle anymore
Guess I will be buying a new one.
TURBO1112 said:
I was able to before. My computer doesn't recognize the Kindle anymore
Click to expand...
Click to collapse
Your computer doesn't need to be recognized by the computer to boot into recovery.
soupmagnet said:
Can you boot into recovery? Do you know how?
Click to expand...
Click to collapse
I *think* I'm having the same issue. When the fire is not plugged in, it's a black screen. No method of pressing the power button does anything (length of time, number of times, etc.). When it IS plugged in, the standard kindle fire/android logo just blinks. Again, power button has no effect whatsoever.
KFU shows ADB offline and Boot unknown.
Just some background info, I had a rooted working Fire. Out of the blue (likely the OTA update) it got stuck at the triangle logo screen and was able to get it into recovery mode. The first time I just reset it to factory.
Rooted again using KFU, said successful root, but installing Google apps kept saying failed or error until finally saying "All done!"
Then tried to install TWRP, and KFU got stuck at trying to put the fire into fast boot mode then <waiting for device>. Recovery screen came up again, and (here's where I made a bonehead decision) figuring I would help things along, I selected fast boot mode. It was stuck on the kindle fire screen for hours. I even tried reinstalling the drivers but that failed. I left it plugged in to my PC and when I woke up this morning I found it in the state it is in now that I first described above.
I will continue to search more threads for an answer, but if I don't update this one that I've found one, it means I haven't.
fzdolfan said:
I *think* I'm having the same issue. When the fire is not plugged in, it's a black screen. No method of pressing the power button does anything (length of time, number of times, etc.). When it IS plugged in, the standard kindle fire/android logo just blinks. Again, power button has no effect whatsoever.
KFU shows ADB offline and Boot unknown.
Just some background info, I had a rooted working Fire. Out of the blue (likely the OTA update) it got stuck at the triangle logo screen and was able to get it into recovery mode. The first time I just reset it to factory.
Rooted again using KFU, said successful root, but installing Google apps kept saying failed or error until finally saying "All done!"
Then tried to install TWRP, and KFU got stuck at trying to put the fire into fast boot mode then . Recovery screen came up again, and (here's where I made a bonehead decision) figuring I would help things along, I selected fast boot mode. It was stuck on the kindle fire screen for hours. I even tried reinstalling the drivers but that failed. I left it plugged in to my PC and when I woke up this morning I found it in the state it is in now that I first described above.
I will continue to search more threads for an answer, but if I don't update this one that I've found one, it means I haven't.
Click to expand...
Click to collapse
The "blinking" boot logo is indicative of a dead battery, probably caused by leaving it in fastboot mode for so long.
http://forum.xda-developers.com/showthread.php?p=25400963
http://www.droidforums.net/forum/droid-labs/146492-how-why-make-your-own-motorola-factory-cable.html
http://forum.xda-developers.com/showthread.php?p=20317299
Your best bet is to follow the first link and do what you can to install FFF1.4 and that will allow you to charge your battery from such a low power state.
You'll have to use the fastboot flash command for this so be sure that the file you use to flash your bootloader is in a .bin format. Simply renaming a .zip to .bin will not work. You have to extract the u-boot.bin from the FFF1.4.zip, otherwise you will hard-brick your device. If you're unsure of what you're doing, ask for help.
On the chance you can't get FFF1.4 installed, you'll need to acquire a factory cable to keep the device powered on long enough to install your bootloader.
Another user recently had a problem that required a factory cable to fix. Take a look at that thread so you have an idea of what needs to be done and how to fix your problem. His problem was different from yours but the solution is the same. http://forum.xda-developers.com/showthread.php?p=25693109
soupmagnet said:
The "blinking" boot logo is indicative of a dead battery, probably caused by leaving it in fastboot mode for so long.
http://forum.xda-developers.com/showthread.php?p=25400963
http://www.droidforums.net/forum/droid-labs/146492-how-why-make-your-own-motorola-factory-cable.html
http://forum.xda-developers.com/showthread.php?p=20317299
Your best bet is to follow the first link and do what you can to install FFF1.4 and that will allow you to charge your battery from such a low power state.
You'll have to use the fastboot flash command for this so be sure that the file you use to flash your bootloader is in a .bin format. Simply renaming a .zip to .bin will not work. You have to extract the u-boot.bin from the FFF1.4.zip, otherwise you will hard-brick your device. If you're unsure of what you're doing, ask for help.
On the chance you can't get FFF1.4 installed, you'll need to acquire a factory cable to keep the device powered on long enough to install your bootloader.
Another user recently had a problem that required a factory cable to fix. Take a look at that thread so you have an idea of what needs to be done and how to fix your problem. His problem was different from yours but the solution is the same. http://forum.xda-developers.com/showthread.php?p=25693109
Click to expand...
Click to collapse
Even after reading the posts regarding the factory cable, I'm still not sure what the difference is. I have been (successfully) using a Motorola Android phone cable that when plugged into the Fire (when it was working) would say that USB is connected and I can now transfer files. I also successfully rooted it once before and installed all the apps and such with the KFU. What would be different that would make this cable only now insufficient?
Btw, I was able to charge it using the stock wall charger. At least I assume it is charged because it is no longer blinking the kindle fire logo, and I am able to shut it down by holding the power button even when plugged into the USB cable.
However, it still won't do anything but show the android/kindle fire logo (static, not flashing/oscillating) whether it's turned on with or without a cable plugged in. Opening the KFU and trying boot modes does nothing. There is no acknowledgment whatsoever that it is connected to the PC either from the fire or the PC. I don't even get the sound effect from the PC that something has been connected via USB.
fzdolfan said:
Even after reading the posts regarding the factory cable, I'm still not sure what the difference is. I have been (successfully) using a Motorola Android phone cable that when plugged into the Fire (when it was working) would say that USB is connected and I can now transfer files. I also successfully rooted it once before and installed all the apps and such with the KFU. What would be different that would make this cable only now insufficient?
Btw, I was able to charge it using the stock wall charger. At least I assume it is charged because it is no longer blinking the kindle fire logo, and I am able to shut it down by holding the power button even when plugged into the USB cable.
However, it still won't do anything but show the android/kindle fire logo (static, not flashing/oscillating) whether it's turned on with or without a cable plugged in. Opening the KFU and trying boot modes does nothing. There is no acknowledgment whatsoever that it is connected to the PC either from the fire or the PC. I don't even get the sound effect from the PC that something has been connected via USB.
Click to expand...
Click to collapse
A "factory cable" is specially made to interact with the device in a way that is different from the OEM Motorola USB cable you are currently using. With a little research and a little more reading you'll be able to find out what the difference is and why it works for fixing dead battery issues.
Using the stock charger was one of the very first things covered in the first link that I gave you. I'm trying to help you fix your problem so please try to pay attention to the information I'm giving you.
So now that your battery issue is resolved, you have to fix the next part of the problem which is resetting your bootmode. By far the easiest way to do this is by flashing the latest 1.4 version of FireFireFire in recovery. Be sure to use recovery to install it or you may find yourself in more trouble than you started.
The thread for the new version along with important information on how to install and use it can be found here: http://forum.xda-developers.com/showthread.php?t=1632375
soupmagnet said:
Using the stock charger was one of the very first things covered in the first link that I gave you.
Click to expand...
Click to collapse
I realize that, and I acknowledged it in my post by stating that it solved the drained battery issue. I also gave thanks on your post.
Accusing me of not paying attention is not necessary.
I only said that I don't see the difference in the factory cable because a) my drained battery was resolved by other means and b) I did read in the factory cable thread that "Seems like you have power and this cable is maininly for when your ... battery is dead and you need to ... fastboot with no battery life left.... So the cable does not matter in your case since your battery has power you can use any usb cable."
soupmagnet said:
So now that your battery issue is resolved, you have to fix the next part of the problem which is resetting your bootmode. By far the easiest way to do this is by flashing the latest 1.4 version of FireFireFire in recovery. Be sure to use recovery to install it or you may find yourself in more trouble than you started.
The thread for the new version along with important information on how to install and use it can be found here: http://forum.xda-developers.com/showthread.php?t=1632375
Click to expand...
Click to collapse
I also looked at this thread, but the initial post seems to imply that I already know how to "Apply this flash.zip from recovery just like any other ROM or kernel .zip file.", which I do not.
As I said, my fire is currently stuck at the kindle fire logo and does not respond to being plugged in to the PC (other than turning on to the kindle fire screen).
Admittedly, I only went about 4 pages deep into the thread, but it seemed to be all posts of thanks (for the most part) to the original post. I will continue reading the thread if you're saying that it indeed contains more helpful information.
I apologize if my post came across as ignorant or lazy, but the fact is that I've been researching this for the better part of the day, and I see plenty of info on what to do if I can get my PC to communicate with my Fire, but the first problem is that I cannot find out how to hurdle that first very important obstacle.
Just to save us both some time (and I do appreciate your patience and willingness to help), are you saying that I need a factory cable regardless of the state of the battery? Because if that's the case, then my first priority is to figure out how to get one, because my knowledge, means, and experience in soldering and inner workings of electronics is zero, so making one myself is not an option.
Forgive my impatience but playing twenty questions with other, less motivated to learn users, gets kind of old after a while (not to say that you fall into that category). Not to mention, I'm a prick and have very little patience to begin with.
With a good charge on your battery there is no longer a need for a factory cable.
Most of the users here are fairly proficient with the use of recovery so its easy to overlook those who aren't. That's why it's important to know up front what your level of experience is, to avoid such assumptions.
Your recovery (TWRP or CWM) has a mount function for mounting certain partitions as external drives onto your computer. Your computer will recognize it in the same way it does a thumb drive. Use it to mount your sdcard and transfer the FFF1.4 so it can be installed while in recovery.
Once installed, reboot and hold the power button as if you were trying to enter recovery again and you will be able to select which mode to boot with. Choose "Normal Boot".
Related
After I rooted my kindle and installed adw.launcher everything was going fine. I rebooted my kindle and out of nowhere it refuses to start. Absolutely nothing shows up at all. The screen doesn't come on, the logo, nothing. The battery was at 75% when it was working. Even when I plug it in the orange charge light doesn't even come on. I need help badly and I would prefer not to have to send it in to get a replacement. The entire reason I created this xda account was to fix this. Please I need help.
That doesn't sound good. Press and hold the on button for like 20 seconds and see if anything happens.
jaredkzr said:
After I rooted my kindle and installed adw.launcher everything was going fine. I rebooted my kindle and out of nowhere it refuses to start. Absolutely nothing shows up at all. The screen doesn't come on, the logo, nothing. The battery was at 75% when it was working. Even when I plug it in the orange charge light doesn't even come on. I need help badly and I would prefer not to have to send it in to get a replacement. The entire reason I created this xda account was to fix this. Please I need help.
Click to expand...
Click to collapse
Try the Hard reset option as explained by GBH2 and if it doesn't help, then please list down what exactly did you do to root your device, stock FW version etc.
Sent from my GT-I9100 using XDA App
I have already tried the hard reset but to no avail. I have no idea what happened to it. I think I will just have to get a replacement. I followed instructions off of mobilemag and of course I can't place the link in this post.
I literally just had same issue... holing power button for 20+ seconds did the trick here.
Running CM7 w/ MAC address fix.
mine's bricked too
I also have a bricked Kindle and not sure what to do about it.
I had my KF rooted and working. Then, I followed these instructions to get a better keyboard. In short, I edited one row of the secure table in settings.db, trying to enable Hackers Keyboard. I followed the instructions very carefully, including changing permissions. When I rebooted, it stuck at the kindle fire logo, and it is still stuck there.
I can connect via adb, but can no longer burrito root. Can't run 'su'. I'm searching these forums trying to figure what to do next.
do you have twrp available ?
if not you could follow this post: http://forum.xda-developers.com/showthread.php?t=1414832
fixed
Thanks. I found that thread via http://forum.xda-developers.com/showthread.php?t=1356257&page=61 and it saved the day.
I was able to fastboot, twrp, and eventually solve my problem.
I had updated settings.db, then used `adb push` to put it in the right place. Then, I chmod-ed it as the instructions warned. However, it was owned by root not system! With twrd, I was able to get back into adb. Chown-ing and chgrp-ing that file to system solved my problem.
(Unfortunately some of the other stuff I did along the way broke a few apps... anyway I'm happy to have a working KF again.)
good to hear !!!
Did you ever get your KF to work? I can not get mine to turn on after KFU 0.9.5 used to do perm root. Now nothing works at all
Kindle fire wont power on /boot
I'm facing the same issue here, i have FFF 1.4a and TWRP 2.2.2.1 installed and JB 4.2.1 from twv. However i noticed whenever i pressed reboot from menu or power it off, i cannot turn it on again.
Luckily i have an OTG cable which help me force boot it, but i want to solve the issue coz i dont want to use the OTG cable always to turn it on.
Note: Holding power button for 20secs did not solve the issue
hi vertcam9 how do you force boot it please.
omniac
omniac said:
hi vertcam9 how do you force boot it please.
omniac
Click to expand...
Click to collapse
Hello, i have a Factory Cable (USB cable) with a different pin configuration. Basically if you have a working bootloader, you just plug it in (with a PC) and it will go to the FFF screen.
I think my issue is a busted USB port already.
ok thanks tried that, but it is deader than that.
omniac
Dead is right on the mark for mine also. With pc never detecting my CM9 , I updated my TWRP to v2.2.2.1, in hopes to go to CM10
And for first time saw *bootloader* as an option in TWRP . Screeching halt!!! Beware.
Seriously people...
vertcam9 said:
I'm facing the same issue here, i have FFF 1.4a and TWRP 2.2.2.1 installed and JB 4.2.1 from twv. However i noticed whenever i pressed reboot from menu or power it off, i cannot turn it on again.
Luckily i have an OTG cable which help me force boot it, but i want to solve the issue coz i dont want to use the OTG cable always to turn it on.
Note: Holding power button for 20secs did not solve the issue
Click to expand...
Click to collapse
vertcam9 said:
Hello, i have a Factory Cable (USB cable) with a different pin configuration. Basically if you have a working bootloader, you just plug it in (with a PC) and it will go to the FFF screen.
Click to expand...
Click to collapse
Normally I would assume you had a 2nd generation device and tried to modify it, but I see your first post was made back in April and then edited two days ago?!? Is this a new problem or the same problem you had eight months ago?
I'm pretty sure your USB port isn't bad and you just have a broken bootloader. If you have a 1st generation device, the Firekit w/shorting trick to put the device in USBboot will do the trick.
omniac said:
hi vertcam9 how do you force boot it please.
omniac
Click to expand...
Click to collapse
omniac said:
ok thanks tried that, but it is deader than that.
omniac
Click to expand...
Click to collapse
How about some details...better yet, start a new thread...In the Q&A section.
Smmoph said:
Dead is right on the mark for mine also. With pc never detecting my CM9 , I updated my TWRP to v2.2.2.1, in hopes to go to CM10
And for first time saw *bootloader* as an option in TWRP . Screeching halt!!! Beware.
Click to expand...
Click to collapse
This sounds like a completely different problem. You should probably start a new thread as well...In the Q&A section.
I have the exact same problem!!!!!!!!!
After I rooted my kindle, everything was going fine. My kindle turned off and when I rebooted, it got stuck in a bootloop. I tried to fix it by reflashing a fresh image and out of nowhere it refuses to start. Absolutely nothing shows up at all. The screen doesn't come on, the logo, nothing. The battery was at 75% when it was working.
This has been the problem since 5 months...
I am using a kindle fire 5th generation and don't have a factory cable.
Can somebody plz help!!!!!!!!!!!!
If so, can someone post a link for a cheap factory cable however I really don't want to use/buy one.
Thanks!
samiultahir said:
I have the exact same problem!!!!!!!!!
After I rooted my kindle, everything was going fine. My kindle turned off and when I rebooted, it got stuck in a bootloop. I tried to fix it by reflashing a fresh image and out of nowhere it refuses to start. Absolutely nothing shows up at all. The screen doesn't come on, the logo, nothing. The battery was at 75% when it was working.
This has been the problem since 5 months...
I am using a kindle fire 5th generation and don't have a factory cable.
Can somebody plz help!!!!!!!!!!!!
If so, can someone post a link for a cheap factory cable however I really don't want to use/buy one.
Thanks!
Click to expand...
Click to collapse
this is only for Kindle Fire 1 (2011)
there is a separate section for your device see
Fire Index: Which Amazon (Kindle) Fire Do I have?
for correct forum link
Sent from my XT1028 using XDA Labs
sd_shadow said:
this is only for Kindle Fire 1 (2011)
there is a separate section for your device see
Fire Index: Which Amazon (Kindle) Fire Do I have?
for correct forum link
Sent from my XT1028 using XDA Labs
Click to expand...
Click to collapse
Oh Thanks Anyways but do you know a fix for this?
BTW I think my device is hard bricked. :crying:
samiultahir said:
Oh Thanks Anyways but do you know a fix for this?
BTW I think my device is hard bricked. :crying:
Click to expand...
Click to collapse
post in the correct forum
Sent from my sailfish using XDA Labs
Hey folks, really having a day here with my Fire.
Looks like it's stuck in a boot loop. I can't stop it or get it to load into recovery. I'm using TWRP and CM9 Reloaded. The problem is I can't change it from fast boot because the ROM won't let me mount the storage. Any suggestions or should I just throw this thing away?
TheTitleist said:
Hey folks, really having a day here with my Fire.
Looks like it's stuck in a boot loop. I can't stop it or get it to load into recovery. I'm using TWRP and CM9 Reloaded. The problem is I can't change it from fast boot because the ROM won't let me mount the storage. Any suggestions or should I just throw this thing away?
Click to expand...
Click to collapse
It would be helpful for you to describe in detail what your device is doing. If you are in fastboot mode, neither the ROM nor the storage mount has anything to do with it. Perhaps it would be helpful for you to read this guide...
http://forum.xda-developers.com/showthread.php?t=1552547
... or if you want to throw the thing away, I can give you my address and I'll be sure to dispose of it properly.
I have read over the beginners guide multiple times hoping for something that might help me.
When I power on my device, I get the FFF triangle for a few seconds. Then it begins to loop that screen for a few seconds then reboot. I am unable to press the power button (either once, multiple times or holding the button down) to enter into recovery.
Windows is not discovering my device when I connect the USB. In between loops it will occasionally pop up the Found New Device wizard. As for not being able to discover my device - I was told this was related to the ROM. I could only mount the storage from within TWRP which I am unable to access.
Is there anything else I could tell you that might help you understand what is happening? I'm not a android pro by any means but I'm not totally technologically inept either.
Thanks again for any advice.
TheTitleist said:
I have read over the beginners guide multiple times hoping for something that might help me.
When I power on my device, I get the FFF triangle for a few seconds. Then it begins to loop that screen for a few seconds then reboot. I am unable to press the power button (either once, multiple times or holding the button down) to enter into recovery.
Windows is not discovering my device when I connect the USB. In between loops it will occasionally pop up the Found New Device wizard. As for not being able to discover my device - I was told this was related to the ROM. I could only mount the storage from within TWRP which I am unable to access.
Is there anything else I could tell you that might help you understand what is happening? I'm not a android pro by any means but I'm not totally technologically inept either.
Thanks again for any advice.
Click to expand...
Click to collapse
Based on what you are describing, I think your battery is (near) dead. The reboot is probably happening because the CPU not getting enough power. I would suggest plugging it into your stock AC charger and leaving it alone for a while to see if it will charge back up.
The bad thing is that the Kindle Fire needs to boot up to charge because the ramdisk handles the charging operation. If your battery doesn't have enough juice to get the CPU going, you might find yourself in a catch-22.
The AC charger is your first, best bet to get your device fixed up.
EDIT: Most users I've seen report this problem have been able to get it to charge with the stock AC charger. However, if that doesn't work for you, take a look at this thread...
http://forum.xda-developers.com/showthread.php?t=1392693&page=23
start at #226 and read about 20 posts or so into it.... Good luck!
Thanks for the information. What you are saying makes a ton of sense. I've not been charging my Fire with the wall plug (The unloaded ROM was having issues with that and could only charge via the USB). I can say that my Fire was totally dead this morning and it sat on the USB charger all day - however it might have been too dead to matter.
I'll park it on the AC charger tonight and see.
TheTitleist said:
Thanks for the information. What you are saying makes a ton of sense. I've not been charging my Fire with the wall plug (The unloaded ROM was having issues with that and could only charge via the USB). I can say that my Fire was totally dead this morning and it sat on the USB charger all day - however it might have been too dead to matter.
I'll park it on the AC charger tonight and see.
Click to expand...
Click to collapse
Resolved. AC charge was all that was needed.
Sneaky bastard of an issue though, looks just like a boot loop.
Thanks for the assistance.
Sent from my Kindle Fire using XDA
ans.
for first five seconds after start up your kindle is in fastboot mode. i`d the same problem. the problem is solved rather simply. you need to connect kindle to the computer and at the same time in Kindle Fire Utility constantly to choose the Fastboot mode. at me it turned out to make it from the third attempt. after that I am flashed my kindle and installed cwm
i had rooted my kindle with firefirefire by KFU and had accidentally erased the SDCARD, so i found a new gingerbread kindle fire OS.zip online no problem and installed it, had it up and working again, all fine and dandy.
Then everytime i booted it up it would always come up with the whole blue "kindle fire" and "press power button for boot options" screen and i decided i didnt want twrp on my kindle anymore and that i wanted to return it back to factory condition. so i looked up on youtube how to de-root you kindle fire and i referenced myself with this video:
http://www.youtube.com/watch?v=AzbmxV45x10
i downloaded the update.zip and flashed my kindle with twrp (just like it said) and everything went fine. however the next time i turned it on (well when it turned itself on after the update) it just got stuck in a boot loop... it will display the factory setting "kindle fire" with the red color, not twrp's blue "kindle fire", then the screen will go brighter like it is about to load the unlock screen, then it just goes back to the darker screen (all whilst displaying the kindle fire logo) then it will shut off. after about 5-10 seconds of being off, it will boot itself back on and repeat the same cycle again.
i have tried to hook it up to the computer, but it only shows up in "My Computer" for about a millisecond. thought maybe it was just my computer that couldnt load fast, so i tried a different computer, same thing.
i have tried holding the power button down for anywhere between 20- 60 seconds, still nothing.
i have tried opening the KFU and going to install firefirefire and letting it load to the point of <waiting for device> and then plugging in my device, still nothing.
i am extremely grateful of any ideas and solutions you guys/girls can offer and help me out. i loved my kindle fire quite dearly and used it everyday. i am willing to accept the fact that i have a $200 brick, but will do just about anything to fix. please help http://forum.xda-developers.com/images/smilies/frown.gif
Have you tried to factory reset it? Very likely you will need to purchase a factory cable to force it into fastboot in order to resend twrp and fff to the device so that you can flash a new rom.
James.Whaton said:
it will display the factory setting "kindle fire" with the red color...then the screen will go brighter like it is about to load the unlock screen, then it just goes back to the darker screen (all whilst displaying the kindle fire logo).
Click to expand...
Click to collapse
Yep, you definitely need a factory cable. You have to wipe both system and factory reset when reverting back to stock or...well...this will happen. Keep your device turned off until you get it because it probably won't charge in that state, and you don't ALSO want to be dealing with a dead battery.
soupmagnet said:
Yep, you definitely need a factory cable. You have to wipe both system and factory reset when reverting back to stock or...well...this will happen. Keep your device turned off until you get it because it probably won't charge in that state, and you don't ALSO want to be dealing with a dead battery.
Click to expand...
Click to collapse
i do have a rocketfish cable that is a step up from the factory cable, always worked in the past whenever i used it for the kindle, i can get it to charge, just not stay connected to my computer... i dont quite know why this happened because all i did was install that update... not quite sure why it did this... any ideas on how to get it back to normal?
Thepooch said:
Have you tried to factory reset it? Very likely you will need to purchase a factory cable to force it into fastboot in order to resend twrp and fff to the device so that you can flash a new rom.
Click to expand...
Click to collapse
how would i factory reset it? i cant get it hooked up to the computer and twrp is completely off the system (or so i would seem) i have a rocketfish cable that is a higher quality then the factory cable or are you talking about a specialized cable that does something other than hook it up to the computer?
James.Whaton said:
how would i factory reset it? i cant get it hooked up to the computer and twrp is completely off the system (or so i would seem) i have a rocketfish cable that is a higher quality then the factory cable or are you talking about a specialized cable that does something other than hook it up to the computer?
Click to expand...
Click to collapse
You wipe system and factory reset BEFORE you revert to stock. Now you need to use the factory cable to get into fastboot and reinstall TWRP so you can go back and do it the right way.
As for the computer not detecting the device...see my post here:
http://forum.xda-developers.com/showthread.php?t=2088864
soupmagnet said:
You wipe system and factory reset BEFORE you revert to stock. Now you need to use the factory cable to get into fastboot and reinstall TWRP so you can go back and do it the right way.
As for the computer not detecting the device...see my post here:
http://forum.xda-developers.com/showthread.php?t=2088864
Click to expand...
Click to collapse
my computer will detect the device but only for a second, because it never fully loads it is only in the booting mode.my computer cant see it due to the kindle not being available. where would i purchase a foctory cable becuse by the way you guys are talking about it it sounds like the cable isnt just a cable but it can make it boot differently... the cable i have now connects it to the computer very easily and just fine, and the only reason that it isnt working now is because the kindle is in a boot loop.
http://forum.xda-developers.com/showthread.php?t=1392693 post 9 James the factory cable will force the device into fastboot so you can use kfu to resend fff and twrp to the device in order to do a full wipe and flash a new system.
forgive me for being curious, but how exactly does this factory cable work? i know that it isnt you who is making them, but i would hope that if you are suggesting to use it you would understand how it works... i have my cable here so why go buy a new one instead of just doing it myself? it seems like it is just a simple soldering job, which i could handle. after a little research it looks like i need to connect pin 1 to pin 4 which wouldnt be all that difficult to do by myself.
could anyone tell me how i could simply create on myself. yes ive read this post:
http://forum.xda-developers.com/showthread.php?t=1392693
but they never quite explain in detail what i need to do to make one. i watched a couple videos on youtube to figurre out what i had to do, but i still would like a more professional opinion as to what i need to do and as to how it works. thank you
lost OS
i have done every thing to the T to get OS back. when i down load the new OS and place it in the kindle updates folder it does not show up in TWRP when I unmount the KF.
suggestions> I have been beating my head on this since some screwball decided to pay with it.
I cannot seem to get my kindle fire unbricked despite reading and trying all solutions I could find and/or think of. I've tried KFU, Kindle Fire Debricker/Unbricker, followed various tutorials, and even made my own factory cable all to no avail yet. My Kindle simply keeps rebooting itself into the stock OS 6.3.1 of amazons about every 30 seconds +/-. Nothing I do can/will change that. When it starts up it shows the kindle fire bootloader then onto the main "Home" screen where various notices come up stating that basically everything is NOT working and they've all failed miserably and horribly. Then onto the next reboot. There is no longer any sort of recovery as far as I can tell. I cant get it to respond to any sort of fastboot anythings. On the positive side I do have the drivers loaded and can use adb with it at will, including adb shell. But all that is just about pointless as any command I try and enter, it simply responds with something about me not having any rights to do anything. I'm pretty sure I know what happened, far as I can tell I was in TWRP recovery when I tried to flash the stock firmware from there and everything just failed. Anyhow, if anyone has any idea what so ever on what to try or where to look for an answer, I'd be eternally grateful. Or if any other info is wanted, just let me know. Thanks all for any advice given ahead of time.
http://forum.xda-developers.com/showthread.php?t=2120816
"That's a special kind of stupid. The kind that makes me laugh."
24861 said:
I cannot seem to get my kindle fire unbricked despite reading and trying all solutions I could find and/or think of.....On the positive side I do have the drivers loaded and can use adb with it at will, including adb shell. But all that is just about pointless as any command I try and enter, it simply responds with something about me not having any rights to do anything. I'm pretty sure I know what happened
Click to expand...
Click to collapse
Try right clicking and select run as administrator.
Sent from my Amazon Kindle Fire using Tapatalk HD
soupmagnet said:
http://forum.xda-developers.com/showthread.php?t=2120816
"That's a special kind of stupid. The kind that makes me laugh."
Click to expand...
Click to collapse
Not to be rude, but..... Any chance on any actual help? Like maybe what to do? mLike I previously said I already have a factory cable but have gotten no where with that. Thank you
24861 said:
Not to be rude, but..... Any chance on any actual help? Like maybe what to do? mLike I previously said I already have a factory cable but have gotten no where with that. Thank you
Click to expand...
Click to collapse
Sure, but I need to know a few things first...
Do you understand what the factory cable is for? Do you know how to use it?
Do you know what fastboot is and how to use it? If so, do you know how to use it to install recovery?
Do you have a general idea of what you need to accomplish to fix your KF? (see the link provided)
"That's a special kind of stupid. The kind that makes me laugh"
soupmagnet said:
Sure, but I need to know a few things first...
Do you understand what the factory cable is for? Do you know how to use it?
Do you know what fastboot is and how to use it? If so, do you know how to use it to install recovery?
Do you have a general idea of what you need to accomplish to fix your KF? (see the link provided)
"That's a special kind of stupid. The kind that makes me laugh"
Click to expand...
Click to collapse
In general....... yes.
Factory cable is simply to put it in fastboot (although I dont know that it does on mine).
I do know what fastboot is and can type in the needed commands if you'd be willing to tell me, though I know a couple.
And yes, Im looking to install TWRP and then flash a stock rom and stock recovery.... I believe.
Then again, all that is probably wrong, ergo why I ask you sir.
Thank you
24861 said:
In general....... yes.
Factory cable is simply to put it in fastboot (although I dont know that it does on mine).
I do know what fastboot is and can type in the needed commands if you'd be willing to tell me, though I know a couple.
And yes, Im looking to install TWRP and then flash a stock rom and stock recovery.... I believe.
Then again, all that is probably wrong, ergo why I ask you sir.
Thank you
Click to expand...
Click to collapse
Okay...
When you plug your powered off Kinlde Fire into the computer with the factory able, it should boot directly to fastboot. Meaning, it will stay at a bright Kindle Fire logo and not go dim or flash.
Anything outside of that would make me wonder if your factory cable is defective (probably not likely) or your battery is near dead. The 30 second reboot is a good indicator of the latter, although that particular situation usually results in a much faster reboot loop (5-10 seconds).
Plug your device into your stock charger and immediately hold the power button down until it shuts off. Then let it charge for a while then try again later.
soupmagnet said:
Okay...
When you plug your powered off Kinlde Fire into the computer with the factory able, it should boot directly to fastboot. Meaning, it will stay at a bright Kindle Fire logo and not go dim or flash.
Anything outside of that would make me wonder if your factory cable is defective (probably not likely) or your battery is near dead. The 30 second reboot is a good indicator of the latter, although that particular situation usually results in a much faster reboot loop (5-10 seconds).
Plug your device into your stock charger and immediately hold the power button down until it shuts off. Then let it charge for a while then try again later.
Click to expand...
Click to collapse
Okay. So far so good. Is doing just what you said, except for I evidently have no fastboot driver installed. Plus it doesnt recognize that the fire is plugged in (in fastboot mode) inside the device manager. So....? Is there a specific driver (fastboot driver) that I need to load (and do you have it?) and how do I get the fire to atleast become recognized?
Thanks again bud
That may not necessarily be the case. What color is your Kindle Fire logo?
"That's a special kind of stupid. The kind that makes me laugh"
soupmagnet said:
That may not necessarily be the case. What color is your Kindle Fire logo?
"That's a special kind of stupid. The kind that makes me laugh"
Click to expand...
Click to collapse
Its white and orange. Although I believe my current issue is that it is stuck in fastboot (4002) mode. Even though it still reboots into normal mode, it remains stuck in fastboot. And I am unsure as to how to get it back as nothing will recognize it, so no drivers will ever install. So I am currently trying to let it run dry of juice in hopes it will reset when its dead. Any ideas?
Don't let the battery die!
I'll tell you what you need to do later when I have more time. In the meantime, keep it turned off.
"That's a special kind of stupid. The kind that makes me laugh"
Draining Is never a good idea. It`s very common for the stock bootloader to be difficult to detect even more so now after there recent update in the past few months, because Amazon tampered with the bootloader enough to cause some people issues.
soupmagnet said:
Don't let the battery die!
I'll tell you what you need to do later when I have more time. In the meantime, keep it turned off.
"That's a special kind of stupid. The kind that makes me laugh"
Click to expand...
Click to collapse
okay. Waiting on you. Thanks
Thepooch said:
Draining Is never a good idea. It`s very common for the stock bootloader to be difficult to detect even more so now after there recent update in the past few months, because Amazon tampered with the bootloader enough to cause some people issues.
Click to expand...
Click to collapse
Just had stock bootloader drivers all installed and what not before I started in with the factory cable (thereby putting it in fastboot (4002) mode.
24861 said:
Just had stock bootloader drivers all installed and what not before I started in with the factory cable (thereby putting it in fastboot (4002) mode.
Click to expand...
Click to collapse
Agreed it`s still normal to be undetected by kfu how does it show in device manager?
24861 said:
Just had stock bootloader drivers all installed and what not before I started in with the factory cable (thereby putting it in fastboot (4002) mode.
Click to expand...
Click to collapse
So far everything seems to be working the way it's supposed to.
Using the factory cable to get into fastboot, type the following command and hit enter:
Code:
fastboot getvar product
When you see "waiting for device", hold the power button to turn the device off. Unplug then replug the factory cable to boot the device back into fastboot. When it boots, you should see an output of "kindle" in the command window.
If that works, do the same thing for the commands to install recovery and change the bootmode.
If you really want to go back to stock, do what you did previously, only this time be sure to do a "factory reset" before installing the update.zip.
soupmagnet said:
So far everything seems to be working the way it's supposed to.
Using the factory cable to get into fastboot, type the following command and hit enter:
Code:
fastboot getvar product
When you see "waiting for device", hold the power button to turn the device off. Unplug then replug the factory cable to boot the device back into fastboot. When it boots, you should see an output of "kindle" in the command window.
If that works, do the same thing for the commands to install recovery and change the bootmode.
If you really want to go back to stock, do what you did previously, only this time be sure to do a "factory reset" before installing the update.zip.
Click to expand...
Click to collapse
Nothing doin' there champ......... just same old "waiting for device" followed to a tee, but nada. Anything else?
Make sure you're using a 2.0 usb port.
I assuredly am using a 2.0 USB port, but still nada. Anything else anybody? Please.................
So.... back to where I was (I had to switch PC's though). I can get adb running just fine. I can getshell even. But cant do much with as all permissions seem denied. And I have continuous access to the sd card as its always mounted it seems, even thru every restart. So...... what to do now?
This is for my 9 year old daughter.
I bought her a kindle fire for christmas but she didnt like the user interface but loved the way my samsung note 2 ran. So to stop her using my note 2 all the time i decided to go ahead and root her kindle fire. Which i did fine. i struggled with installing cutom recover but found TWEEZERMOD worked briiliant along with the cordless APK.
i tried to install cm-10.1-20130218-UNOFFICIAL-otter2.zip and it worked like a charm. In cuoidstom recovery i did all the nessasary wipes beofre installing the rom to avoid being stuck at boot lolgo and it loaded up perfect!
i then downlaoded another om to test that (i shouldnt have pushed my luck) jb-4.2-kfire-hashcode-12-11 and it installed but never booted.
I am now stuck on the white and orrange kindle fire logo. my computer wont recognise or ackowladge that the kindle fire is plugged into it so i cannot use unbrick utility or anything.
I have been upp all night desperatly trying to solve this problem and im stuck.
please please help me i have do get this done before my daughter wakes otherwise i lose all hero status.
i will await your response
thank you
Ichigo said:
Wipe everything by external storage and flash again.
Click to expand...
Click to collapse
In case you're wondering, I'm pretty sure Ichigo means wipe everything BUT external storage
Hey guys thanks for the imput been sat here for ages waiting for a reply so im very greatfull. Do you mean reboot the phone into recovery via KFU?
My laptop wont detect the kindle fire at all. None of the utilities ive downloaded over the past 5 hours detect my device.
im trying everything here so any imput is magical thanks
Ichigo said:
Hold the power down until it shuts down and then reboot into recovery. Wipe everything by external storage and flash again. If you get stuck again, redownload the ROM.
Click to expand...
Click to collapse
Ive tried holding the power button for 20 seconds to reboot into recovery but no joy
Nothing happens
When i switch it on it just stays on the "kindle fire" white and orange logo. When i hold the power button down, it switches off. So if i hold it for 20 seconds it powers on for about 15 seconds (still holding power) then it goes of. I have plugged it into my laptop when its off then it comes on (back to the kindle fire logo) but the laptop wont detect it.
im in dyer need of help here
No option for boot into recovery. Piror to me installing the second rom a blue "kindle fire" Logo would show and say " press power button to boot into recovery" id press it and that took me into twrp. And as you know from there i can do wipes and reinstall a rom.
But it doesnt get past "kindle fire" white and orange logo.
this is where im stuck.
there is nothing on this site that i have found to help me out it looks like a new problem. which is just my luck.
Leejaxson said:
When i switch it on it just stays on the "kindle fire" white and orange logo. When i hold the power button down, it switches off. So if i hold it for 20 seconds it powers on for about 15 seconds (still holding power) then it goes of. I have plugged it into my laptop when its off then it comes on (back to the kindle fire logo) but the laptop wont detect it.
im in dyer need of help here
Click to expand...
Click to collapse
You don't have FireFireFire installed so you need to get a factory cable.
Factory cable? hhmmmmmmmmm now im in trouble. What would this do?
when you say factory cable do you mean the cable that came with the kindle?
Factory cable
PLEASE NOTE: THIS CABLE IS NOT A STANDARD USB DATA AND CHARGING CABLE IT LOOKS THE SAME AS A STD CABLE BUT IS WIRED TOTALLY DIFFERENT TO A STD USB CABLE. It is a factory cable that is specifically designed to access functions on devices that cannot be accessed with a standard USB Data Cable.
What is a Factory Cable?
Unlike a normal USB cable these cables are wired in a way that allow compatible Motorola phones or devices, including the Kindle Fire to recognize a "factory" setting when plugged in. This allows the phone or device to power up and be flashed without having a battery in the phone, (no battery removal is required with Kindle Fire). Depending upon the model of the phone or device, it may also boot up differently than it does with a normal USB cable.
A Factory Cable is used when your device is being made in the ‘factory’, the manufacturer plugs in a cable and loads the Operating System for the first time. They use the special cable as shown in the Ebay listing above which makes the device download a boot-loader easily. A Factory Cable allows you to do the exact same thing – it enables someone to load a new boot-loader easily. This can, in turn, be used to load new ROMS (Operating systems) and access a device such as the Kindle Fire in a boot mode when it has been impossible to access the Device.
If you want to buy one, go with SkorPn's factory cable. Unless you are cheap and you want to buy it from China...
Here's the link
http://forum.xda-developers.com/showthread.php?p=20380015
It is different from a regular USB cable or a power cable like the one that came with the kindle in the sense that it shorts the kindle, which causes the device to be put into fastboot.
Sent from my Amazon Kindle Fire using Tapatalk HD
Leejaxson said:
This is for my 9 year old daughter.
I bought her a kindle fire for christmas but she didnt like the user interface but loved the way my samsung note 2 ran. So to stop her using my note 2 all the time i decided to go ahead and root her kindle fire. Which i did fine. i struggled with installing cutom recover but found TWEEZERMOD worked briiliant along with the cordless APK.
i tried to install cm-10.1-20130218-UNOFFICIAL-otter2.zip and it worked like a charm. In cuoidstom recovery i did all the nessasary wipes beofre installing the rom to avoid being stuck at boot lolgo and it loaded up perfect!
i then downlaoded another om to test that (i shouldnt have pushed my luck) jb-4.2-kfire-hashcode-12-11 and it installed but never booted.
I am now stuck on the white and orrange kindle fire logo. my computer wont recognise or ackowladge that the kindle fire is plugged into it so i cannot use unbrick utility or anything.
I have been upp all night desperatly trying to solve this problem and im stuck.
please please help me i have do get this done before my daughter wakes otherwise i lose all hero status.
i will await your response
thank you
Click to expand...
Click to collapse
Is youre kindle a KF2? before you rooted/rom'ed it, what was the system version? I think you flashed your Kindle Fire 2 with a KF1 rom. Was your 1st rom from here: http://get.cm/?device=otter or Here: http://get.cm/?device=otter2. If your rom was the 2nd one, you have a KF2 and you flashed the rom for the KF1 on the 2nd one. You will have to get a factory cable (The one jma9454 shows)
Ichigo said:
Ah, yes. I took a look, and the first ROM you flashed was powerpoint45's build fore the kindle fire 2. You said it worked like a charm, so I assume you have a kf2. You should not flash any ROMS you find over here, for they are kf1 only
Click to expand...
Click to collapse
And TweezerMod is only KF2.
Case Solved!
ok guys im back!!! thank you all so very much for your input last time round i need to call on your good selves again!
I have purchased a factory cable. I have it plugged in to my laptop and on the screen i have in red the words FASTBOOT with a green light flashing.
please somebody guide me as to what i do next.
thanks again i cant seem to find a right guide.
You have a 2nd generation Kindle Fire. You should probably start with the Kindle Fire 2 forums.
Ok ill try and search there
sorry i cant find my answers over there
i will send money via paypal if someone can help me tonight!!!!!!
As much as I would LOVE to take your money, there are others more deserving of your donation...
http://forum.xda-developers.com/showpost.php?p=36647251