Develop Bugs

[Q] Original RUU

Hi peeps
I screwed up installing a ROM. does anyone have or can help with the original RUU for a UK htc one x? Pretty please :cyclops:

You can not screw up a rom, only the install process ! Do it again the right way.
Do a full wipe, flash the boot.img that is in the rom.zip file with fastboot commands, flash the rom.zip in recovery !
Should be good to go again

MarcelHofs said:
You can not screw up a rom, only the install process ! Do it again the right way.
Do a full wipe, flash the boot.img that is in the rom.zip file with fastboot commands, flash the rom.zip in recovery !
Should be good to go again
Click to expand...
Click to collapse
Ok yeas it wasnt the ROM it was me and the process - thats what i meant.
Thanks I will give it a go, fingers crossed.

PaulReddington said:
Ok yeas it wasnt the ROM it was me and the process - thats what i meant.
Thanks I will give it a go, fingers crossed.
Click to expand...
Click to collapse
Well flashed the boot.img but not sure how to boot the rom.zip in recovery. Could you help please. not the phone instead of just being frozen is now on a loop so its progress.

PaulReddington said:
Well flashed the boot.img but not sure how to boot the rom.zip in recovery. Could you help please. not the phone instead of just being frozen is now on a loop so its progress.
Click to expand...
Click to collapse
flash the boot.img as you did again, then boot into recovery and flash the rom.zip... remember to full wipe

In recovery you have to
Install zip from sdcard
Choose zip from sdcard
Choose the rom.zip and follow the on screen process :thumbup:

So close
MarcelHofs said:
In recovery you have to
Install zip from sdcard
Choose zip from sdcard
Choose the rom.zip and follow the on screen process :thumbup:
Click to expand...
Click to collapse
Thanks for the imput guys,
i managed to get it installed and load into the new Rom (maximus) but i have no wi fi and no signal and bluetooth/airplane mode are both playing up any ideas what i can do?
I read on here something about flashing the radio but have no idea where that file would be as havent been able to find it going through all the files in the ROM.
Much appreciated

[Q] My HOX (HTC One X) wont install sense roms

Hello,
I have recently bought a second-hand HTC One X. When i bought the HOX it was rooted running the viper x 2.0.0 rom. I decided to change the rom to cyanogen 10 nightly. It was working fine but then i decided to install slim bean 3.0.0 and this was working fine too (this is what i have on my HOX right now).What i would like to do is install viper x 2.0.0 again or another sense-based rom. However i tried doing this and it does not boot. When i install it, it just loads the htc logo and then reboots again back into clockworkmod recovery?
I have tried various sense-based roms and none of then work? Also i know viper x 2.0.0 works because it was on there when i bought it.
Please can someone give me instuctions on how to do it.
Thanks in advance
P.S When i try to install the viper x or other sense-based rom i flash the boot.img using 'fastboot flash boot boot.img'
I have just fixed it i installed the latest version and worked the one i was installing must have been a ota update? anyway if u are stuck like me read this

after flashing the boot.img try "fastboot erase cache" it should work

erase cache always

Thanks for reply
Iacopo91 said:
after flashing the boot.img try "fastboot erase cache" it should work
Click to expand...
Click to collapse
Yes i have tried doing this many times and still isn't installing any sense roms?
Please could u give me a instruction to how to install a sense-based rom or viperx (step by step)
Thanks

He is what is says:
The5alodi said:
erase cache always
Click to expand...
Click to collapse
View attachment 1568226

Are you flashing the correct boot.img from the viperx rom.zip
Sent from my HTC One X

Viperx
TToivanen said:
Are you flashing the correct boot.img from the viperx rom.zip
Sent from my HTC One X
Click to expand...
Click to collapse
Yes, i know this because i use winrar to extract the boot.img from the viperx.zip
What do u think i should do to make it work?
I was thinking do i need to flash a kernel that works for the viperx to work or does the viperx.zip already have a kernel inside the file?
At the moment i have : 2.6.39.4-cyanogenmod because i have slimbean installed which is based on cm10

Full wipe, that's all I can think of.
Sent from my HTC One X

This is one of the ways i have done it:
TToivanen said:
Full wipe, that's all I can think of.
Sent from my HTC One X
Click to expand...
Click to collapse
1. go to bootloader and hit fastboot option
2. fastboot erase cache
3. fastboot flash boot boot.img (boot.img from the viperx.zip)
4. fastboot erase cache
5. disconect the phone from USB and go to the recovery
6. wipe data/factory reset
7. wipe cache
8. mounts & storage format system , data , cache
9. go to advanced and wipe dalvic cache
10. flash the rom
11. I rebooted the HOX in the aroma installer
12. and then it just boots on htc logo then back into recovery?!?
Also the weird thing is only sense-based roms don't work? And all the sense-based roms i have tried use aroma installer, maybe this could be to do with it?

First install rom then boot.img.
Sent from my HTC One X

did u full wipe inside aroma + what rom ver you are using maybe you are flashing an update or what hboot you are on ?

Ok will try now...
TToivanen said:
First install rom then boot.img.
Sent from my HTC One X
Click to expand...
Click to collapse
Ok i will try now and report back my results.
Thanks for possible anwser

i used to install ROM before flashing the boot.img and erasing cache... if i flash boot.img before sometimes i'm stuck in bootloop...
the boot.img has to be extracted from the rom itself... also try to flash other different roms

It is...
The5alodi said:
did u full wipe inside aroma + what rom ver you are using maybe you are flashing an update or what hboot you are on ?
Click to expand...
Click to collapse
I will try now a full wipe and it is not a update as far as i am aware of. the file is called: ViperX_v2.0.0
And my hboot is:
HBOOT-1.12.0000

I have done this...
Iacopo91 said:
i used to install ROM before flashing the boot.img and erasing cache... if i flash boot.img before sometimes i'm stuck in bootloop...
the boot.img has to be extracted from the rom itself... also try to flash other different roms
Click to expand...
Click to collapse
I have done this?!?

try the latest i think its 2.7 or check ARHD because your problem is weird

ok i willl
The5alodi said:
try the latest i think its 2.7 or check ARHD because your problem is weird
Click to expand...
Click to collapse
Ok i will have to download it and its 647mb which will take me 1hr to 1hr and 30mins so will report back when i try to install it.

ok i am going to watch real Madrid match so P.M me i will help dont worry

ok thanks very much!!!!!!!!
The5alodi said:
ok i am going to watch real Madrid match so P.M me i will help dont worry
Click to expand...
Click to collapse
Ok i will do

Its working now!!!
Everyone thanks for helping i think i was instally a update not the actual rom !?! silly me !!!
Thanks again!

[Q] Cant install blade v2.1.0 ?

Hello,
I am wanting to install blade v2.1.0 on my htc one x with hboot 1.36 but when i flash boot.img and install it, it gets stuck on htc boot logo?
At the moment i am on viper x 2.7.1 if that helps?
Could anyone help me thanks in advance
thanks

Link...
http://forum.xda-developers.com/showthread.php?t=2027029

Try wipe before install.

i have already?
TToivanen said:
Try wipe before install.
Click to expand...
Click to collapse
This is what i have done:
1)flash boot .img
2)wipe date/factory reset
3)Wipe cache
4)wipe davlik cache
5)install zip from sd card
6)then reboot...
7)then stuch on htc logo on boot?
Thanks for repling do u no what to do? THanks in advance
i waited for 5mins on the htc logo and no sign of it booting?

Do it all over but this time install this zipfile before flashing the rom in recovery
http://db.tt/eLoVUcRc
Put this file on the sd card and flash it in recovery like a rom, when this completed install the blade rom ! Maybe it helps
Ps it's a superwipe script !

Thankyou will try now..
MarcelHofs said:
Do it all over but this time install this zipfile before flashing the rom in recovery
http://db.tt/eLoVUcRc
Put this file on the sd card and flash it in recovery like a rom, when this completed install the blade rom ! Maybe it helps
Ps it's a superwipe script !
Click to expand...
Click to collapse
Thankyou for trying i will try now and report back thanks for your help !

Did not work!
It didnt work why do u think its not working?
When i install the desense version it takes less than 30secs to install and it says
"Installing update package"
But it cant be an update because it was 280mb and the 2.0.0 release is also 280mb?
Thanks for help any more suggestions?

Did u check the checksum of the rom ? Maybe bad downloads, are u using some download manager or accelerater ? Those things might cause trouble ?
Just thinking out loud here !

hello thanks
MarcelHofs said:
Did u check the checksum of the rom ? Maybe bad downloads, are u using some download manager or accelerater ? Those things might cause trouble ?
Just thinking out loud here !
Click to expand...
Click to collapse
I know what u mean but no i am just downloading normally and i have just downloaded the sense version and itdid not work ?
I can still boot into viperx thou???
And how do u check the cheaksum?
Thanks in advance.

Is your hboot now 1.36 ?
Can you run command fastboot getvar version-main in fastboot and write here what it say

ckpv5 said:
Is your hboot now 1.36 ?
Can you run command fastboot getvar version-main in fastboot and write here what it say
Click to expand...
Click to collapse
He says it is on the OP.....so i assume he checked that

MarcelHofs said:
He says it is on the OP.....so i assume he checked that
Click to expand...
Click to collapse
I saw that, just need to reconfirm as he said after reboot he has ViperX running... but I don't really follow ViperX ROM, can that run on hboot 1.36 ?

Yes ... I'm running it on the 1.36 hboot myself

MarcelHofs said:
Yes ... I'm running it on the 1.36 hboot myself
Click to expand...
Click to collapse
Thanks for the info...
And now OP post his question in that Blade ROM thread, he will get more help there

Yeh I have hboot 1.36 and it still doesn't boot can u help ? Thanks in advance
Sent from my HTC One X using xda premium

Also I can use viperx cos the Rom can run on that hboot
Sent from my HTC One X using xda premium

The only thing i can think of is a bad download .....
If you flashed the kernel in fastboot, did a full wipe (superwipe script) and flash the rom it should boot ... It's just as simple as that !
And I don't see a modified boot.img in the OP of the blade rom either so that's not it !
I would gladly test it on my hox with 1.36 hboot but I can't until tomorrow in the evening .a

Lewiswatson99 said:
I can still boot into viperx thou???
Thanks in advance.
Click to expand...
Click to collapse
when you said you still can boot into viperx, you reflash the viperx ROM or just a reboot after failed attempt to boot Blade, it boots to viperx ?
Edit: It is either you use the superwipe script provided by MarcelHofs to really make a full wipe
or on your previous step that you mentioned:
1)flash boot .img
2)wipe date/factory reset
3)Wipe cache
4)wipe davlik cache
** format system <---- do this too
5)install zip from sd card
6)then reboot...
7)then stuch on htc logo on boot? it should boot
---------- Post added at 05:34 PM ---------- Previous post was at 05:00 PM ----------
MarcelHofs said:
I would gladly test it on my hox with 1.36 hboot but I can't until tomorrow in the evening .a
Click to expand...
Click to collapse
I think there is no need for you to waste your time to test the ROM. If he run your superwipe script, it should boot.
Check your PM.

What I personally did:
1. format /system
2. wipe data/factory reset
3. clear dalvik and erase cache
4. flash ROM
5. flash boot.img
No problem..

tomascus said:
What I personally did:
1. format /system
2. wipe data/factory reset
3. clear dalvik and erase cache
4. flash ROM
5. flash boot.img
No problem..
Click to expand...
Click to collapse
Good ! And it's the standard procedure ....i'm not getting it why it doesn't boot ???

[Q] Com.android.phone on boot

Hello,i was having a problem with my HTC one x tegra 3 32gb version.I rooted,put a TWRP recovery.Then try to flash with a cianogenmod.I wipe data before.Clear cache both.The flash was succesfull but when phone load up to home screen it shows this error "Unfortunately,the process com.android.phone has stopped.".Then i try to flash with a venom rom and the same problem apears again.

Same problem here.Please help..

Did you flash the boot.img?
Sent from my IceCold One X

TToivanen said:
Did you flash the boot.img?
Sent from my IceCold One X
Click to expand...
Click to collapse
Do you mean flash recovery like CWNM or TWRP?

quasar iKrime said:
Do you mean flash recovery like CWNM or TWRP?
Click to expand...
Click to collapse
No. You must extract the boot.img from the ROM zip file and put it to your fastboot folder. Type fastboot flash boot boot.img to flash it.
Then full wipe and flash the ROM in recovery.
Sent from my IceCold One X

TToivanen said:
No. You must extract the boot.img from the ROM zip file and put it to your fastboot folder. Type fastboot flash boot boot.img to flash it.
Then full wipe and flash the ROM in recovery.
Sent from my IceCold One X
Click to expand...
Click to collapse
Im Just Downloaded Slimrom.And selected install zip from sd form CWM.There is need for flash?Please help and thanks.

quasar iKrime said:
Im Just Downloaded Slimrom.And selected install zip from sd form CWM.There is need for flash?Please help and thanks.
Click to expand...
Click to collapse
Download this : https://www.dropbox.com/s/0y31poo1ki...e script.zip
1. Flash The boot.img from the rom.zip(Open rom.zip using winrar/winzip and extract the boot.img from it). Put the boot.img in fasboot folder and then boot into fastboot and run the following line in cmd:
fastboot erase cache
fastboot flash boot boot.img
fastboot erase cache
2. Boot into recovery and use the super wipe script.
3. Flash the rom.zip and then gapps.zip
4. Reboot.
5. Enjoy!

@vin4yak
Thanks but he already figured it out and informed me via PM.
Now we wait for @Mvalev95 to pop up...

[email protected] i didnt flash the boot.img now i've done your steps but i have new problem but i can use the phone.The problem is i get error android.process.acore

Mvalev95 said:
[email protected] i didnt flash the boot.img now i've done your steps but i have new problem but i can use the phone.The problem is i get error android.process.acore
Click to expand...
Click to collapse
If you have followed the exacts steps which I have given, then it should work fine!
Maybe its a bad download? Download the ROM/Gapps again OR try downloading a different ROM like IceColdJelly (which I'm using) and repeat the steps again which I have given...
ROM Link : http://tunsd.de/downloads/ICJ/IceColdJelly421/aokp_ICJ422-V3.0.zip
Gapps: http://goo.im/gapps/gapps-jb-20130301-signed.zip

I am such a newb i forgot to put the gapps zip when flashing.What i need to do now to flash the rom with the with the rom and the gapps.I think i dont have to do with boot.img now.

Mvalev95 said:
I am such a newb i forgot to put the gapps zip when flashing.What i need to do now to flash the rom with the with the rom and the gapps.I think i dont have to do with boot.img now.
Click to expand...
Click to collapse
Yes you don't need to flash the boot.img again... Just boot into recovery... wipe cache+dalvic and then flash gapps.zip (Download the one which I gave you)... and then reboot!
Edit: The above way can be followed if your booting into ROM correctly... If you can't then just follow the steps again which I had posted earlier in the thread...

Everything is fixxed thanks i add only gapps and the problem persist but clear contact storage and now is ok.

Mvalev95 said:
Everything is fixxed thanks i add only gapps and the problem persist but clear contact storage and now is ok.
Click to expand...
Click to collapse
great!! :good:

TWRP screen not working

Hello,
So i was rooting my HTC ONE X, following the steps by guide in general thread. And when i flashed TWRP and booted into it, screen is not responding and i can not navigate through it. What i did wrong?

Nothing probably. The newer official bases have updated touchdrivers .....
Flash this one and try again
http://db.tt/H7m4ffIP

there are problems with the 3.20 fw...I am using cwm now, until fixed version will come out

Mr Hofs said:
Nothing probably. The newer official bases have updated touchdrivers .....
Flash this one and try again
http://db.tt/H7m4ffIP
Click to expand...
Click to collapse
How should i do that? I was following this http://forum.xda-developers.com/showthread.php?t=2069904 thread so really no idea how to flash things without CWMP or TWRP.

throcker said:
there are problems with the 3.20 fw...I am using cwm now, until fixed version will come out
Click to expand...
Click to collapse
Nah no problem with the 3.20 firmware.....it already exist from the first 3.16 update

So should i flash CWM on top?

Yeah just flash it. It will override the old one

Mr Hofs said:
Yeah just flash it. It will override the old one
Click to expand...
Click to collapse
Thank you, it worked just fine.

I know
CASE CLOSED !

Mr Hofs said:
I know
CASE CLOSED !
Click to expand...
Click to collapse
So another problem i have. After i wiped cache dalvik and other, Flashed a ROM and flashed a kernel from boot.img, rom boots up. Everything seems ok except touchscreen not working. Can not insert pin code. Any ideas?

redh4t said:
So another problem i have. After i wiped cache dalvik and other, Flashed a ROM and flashed a kernel from boot.img, rom boots up. Everything seems ok except touchscreen not working. Can not insert pin code. Any ideas?
Click to expand...
Click to collapse
Which ROM are you using?
Did you fully wipe everything in recovery?
1. Flash boot.img from the rom.zip after that...
2. fastboot erase cache
3. Flash this script via recovery(Install from sd>choose the zip) : http://d-h.st/kG0 (it wipes /data/cache/dalvic/system
4. Flash the rom
5. Reboot!

vin4yak said:
Which ROM are you using?
Did you fully wipe everything in recovery?
1. Flash boot.img from the rom.zip after that...
2. fastboot erase cache
3. Flash this script via recovery(Install from sd>choose the zip) : http://d-h.st/kG0 (it wipes /data/cache/dalvic/system
4. Flash the rom
5. Reboot!
Click to expand...
Click to collapse
How to do that second step? fastboot erase cache?
This is what i did:
1. Rooted my phone.
2. Made a backup
3. Wipe Cache, Dalvik, Factory Reset and System with CWMR
4. Installed ROM MIUI Official
5. Rebooted into bootloader
6. Opened toolkit by Hasoon2000 (allinone) and flashed kernel (boot.img) from ROM.zip
7. Rebooted - touchscreen bug.

redh4t said:
How to do that second step? fastboot erase cache?
This is what i did:
1. Rooted my phone.
2. Made a backup
3. Wipe Cache, Dalvik, Factory Reset and System with CWMR
4. Installed ROM MIUI Official
5. Rebooted into bootloader
6. Opened toolkit by Hasoon2000 (allinone) and flashed kernel (boot.img) from ROM.zip
7. Rebooted - touchscreen bug.
Click to expand...
Click to collapse
Use RD-MIUI from xda! Don't use the one from the other site... many people have found this touch screen bug! It's because of the different bases I presume...
I don't use toolkits to flash boot.img or anything... I do it manually via fastboot.. The toolkit also does the same thing but it just doesn't show you (does it in background)...

vin4yak said:
Use RD-MIUI from xda! Don't use the one from the other site... many people have found this touch screen bug! It's because of the different bases I presume...
I don't use toolkits to flash boot.img or anything... I do it manually via fastboot.. The toolkit also does the same thing but it just doesn't show you (does it in background)...
Click to expand...
Click to collapse
So i flashed XM kernel and modules in it. Screen seems to be working.

redh4t said:
So i flashed XM kernel and modules in it. Screen seems to be working.
Click to expand...
Click to collapse
Great! Enjou MIUI! :good:

vin4yak said:
Great! Enjou MIUI! :good:
Click to expand...
Click to collapse
Thank you. +1 for you guys.

Mr Hofs said:
Nothing probably. The newer official bases have updated touchdrivers .....
Flash this one and try again
http://db.tt/H7m4ffIP
Click to expand...
Click to collapse
Hello I have the same issue but there no file anymore when I click on link above.
Could you tell me what the file you gave to help that person was ?

layoup said:
Hello I have the same issue but there no file anymore when I click on link above.
Could you tell me what the file you gave to help that person was ?
Click to expand...
Click to collapse
http://db.tt/SPXdFfPw
This one.....

Mr Hofs said:
http://db.tt/SPXdFfPw
This one.....
Click to expand...
Click to collapse
Thanks a lot
It works

Mr Hofs said:
http://db.tt/SPXdFfPw
This one.....
Click to expand...
Click to collapse
EDITED: I found my nand in CWM backup.