[Q] Cant install blade v2.1.0 ? - HTC One X

Hello,
I am wanting to install blade v2.1.0 on my htc one x with hboot 1.36 but when i flash boot.img and install it, it gets stuck on htc boot logo?
At the moment i am on viper x 2.7.1 if that helps?
Could anyone help me thanks in advance
thanks

Link...
http://forum.xda-developers.com/showthread.php?t=2027029

Try wipe before install.

i have already?
TToivanen said:
Try wipe before install.
Click to expand...
Click to collapse
This is what i have done:
1)flash boot .img
2)wipe date/factory reset
3)Wipe cache
4)wipe davlik cache
5)install zip from sd card
6)then reboot...
7)then stuch on htc logo on boot?
Thanks for repling do u no what to do? THanks in advance
i waited for 5mins on the htc logo and no sign of it booting?

Do it all over but this time install this zipfile before flashing the rom in recovery
http://db.tt/eLoVUcRc
Put this file on the sd card and flash it in recovery like a rom, when this completed install the blade rom ! Maybe it helps
Ps it's a superwipe script !

Thankyou will try now..
MarcelHofs said:
Do it all over but this time install this zipfile before flashing the rom in recovery
http://db.tt/eLoVUcRc
Put this file on the sd card and flash it in recovery like a rom, when this completed install the blade rom ! Maybe it helps
Ps it's a superwipe script !
Click to expand...
Click to collapse
Thankyou for trying i will try now and report back thanks for your help !

Did not work!
It didnt work why do u think its not working?
When i install the desense version it takes less than 30secs to install and it says
"Installing update package"
But it cant be an update because it was 280mb and the 2.0.0 release is also 280mb?
Thanks for help any more suggestions?

Did u check the checksum of the rom ? Maybe bad downloads, are u using some download manager or accelerater ? Those things might cause trouble ?
Just thinking out loud here !

hello thanks
MarcelHofs said:
Did u check the checksum of the rom ? Maybe bad downloads, are u using some download manager or accelerater ? Those things might cause trouble ?
Just thinking out loud here !
Click to expand...
Click to collapse
I know what u mean but no i am just downloading normally and i have just downloaded the sense version and itdid not work ?
I can still boot into viperx thou???
And how do u check the cheaksum?
Thanks in advance.

Is your hboot now 1.36 ?
Can you run command fastboot getvar version-main in fastboot and write here what it say

ckpv5 said:
Is your hboot now 1.36 ?
Can you run command fastboot getvar version-main in fastboot and write here what it say
Click to expand...
Click to collapse
He says it is on the OP.....so i assume he checked that

MarcelHofs said:
He says it is on the OP.....so i assume he checked that
Click to expand...
Click to collapse
I saw that, just need to reconfirm as he said after reboot he has ViperX running... but I don't really follow ViperX ROM, can that run on hboot 1.36 ?

Yes ... I'm running it on the 1.36 hboot myself

MarcelHofs said:
Yes ... I'm running it on the 1.36 hboot myself
Click to expand...
Click to collapse
Thanks for the info...
And now OP post his question in that Blade ROM thread, he will get more help there

Yeh I have hboot 1.36 and it still doesn't boot can u help ? Thanks in advance
Sent from my HTC One X using xda premium

Also I can use viperx cos the Rom can run on that hboot
Sent from my HTC One X using xda premium

The only thing i can think of is a bad download .....
If you flashed the kernel in fastboot, did a full wipe (superwipe script) and flash the rom it should boot ... It's just as simple as that !
And I don't see a modified boot.img in the OP of the blade rom either so that's not it !
I would gladly test it on my hox with 1.36 hboot but I can't until tomorrow in the evening .a

Lewiswatson99 said:
I can still boot into viperx thou???
Thanks in advance.
Click to expand...
Click to collapse
when you said you still can boot into viperx, you reflash the viperx ROM or just a reboot after failed attempt to boot Blade, it boots to viperx ?
Edit: It is either you use the superwipe script provided by MarcelHofs to really make a full wipe
or on your previous step that you mentioned:
1)flash boot .img
2)wipe date/factory reset
3)Wipe cache
4)wipe davlik cache
** format system <---- do this too
5)install zip from sd card
6)then reboot...
7)then stuch on htc logo on boot? it should boot
---------- Post added at 05:34 PM ---------- Previous post was at 05:00 PM ----------
MarcelHofs said:
I would gladly test it on my hox with 1.36 hboot but I can't until tomorrow in the evening .a
Click to expand...
Click to collapse
I think there is no need for you to waste your time to test the ROM. If he run your superwipe script, it should boot.
Check your PM.

What I personally did:
1. format /system
2. wipe data/factory reset
3. clear dalvik and erase cache
4. flash ROM
5. flash boot.img
No problem..

tomascus said:
What I personally did:
1. format /system
2. wipe data/factory reset
3. clear dalvik and erase cache
4. flash ROM
5. flash boot.img
No problem..
Click to expand...
Click to collapse
Good ! And it's the standard procedure ....i'm not getting it why it doesn't boot ???

Related

[Q] My HOX (HTC One X) wont install sense roms

Hello,
I have recently bought a second-hand HTC One X. When i bought the HOX it was rooted running the viper x 2.0.0 rom. I decided to change the rom to cyanogen 10 nightly. It was working fine but then i decided to install slim bean 3.0.0 and this was working fine too (this is what i have on my HOX right now).What i would like to do is install viper x 2.0.0 again or another sense-based rom. However i tried doing this and it does not boot. When i install it, it just loads the htc logo and then reboots again back into clockworkmod recovery?
I have tried various sense-based roms and none of then work? Also i know viper x 2.0.0 works because it was on there when i bought it.
Please can someone give me instuctions on how to do it.
Thanks in advance
P.S When i try to install the viper x or other sense-based rom i flash the boot.img using 'fastboot flash boot boot.img'
I have just fixed it i installed the latest version and worked the one i was installing must have been a ota update? anyway if u are stuck like me read this
after flashing the boot.img try "fastboot erase cache" it should work
erase cache always
Thanks for reply
Iacopo91 said:
after flashing the boot.img try "fastboot erase cache" it should work
Click to expand...
Click to collapse
Yes i have tried doing this many times and still isn't installing any sense roms?
Please could u give me a instruction to how to install a sense-based rom or viperx (step by step)
Thanks
He is what is says:
The5alodi said:
erase cache always
Click to expand...
Click to collapse
View attachment 1568226
Are you flashing the correct boot.img from the viperx rom.zip
Sent from my HTC One X
Viperx
TToivanen said:
Are you flashing the correct boot.img from the viperx rom.zip
Sent from my HTC One X
Click to expand...
Click to collapse
Yes, i know this because i use winrar to extract the boot.img from the viperx.zip
What do u think i should do to make it work?
I was thinking do i need to flash a kernel that works for the viperx to work or does the viperx.zip already have a kernel inside the file?
At the moment i have : 2.6.39.4-cyanogenmod because i have slimbean installed which is based on cm10
Full wipe, that's all I can think of.
Sent from my HTC One X
This is one of the ways i have done it:
TToivanen said:
Full wipe, that's all I can think of.
Sent from my HTC One X
Click to expand...
Click to collapse
1. go to bootloader and hit fastboot option
2. fastboot erase cache
3. fastboot flash boot boot.img (boot.img from the viperx.zip)
4. fastboot erase cache
5. disconect the phone from USB and go to the recovery
6. wipe data/factory reset
7. wipe cache
8. mounts & storage format system , data , cache
9. go to advanced and wipe dalvic cache
10. flash the rom
11. I rebooted the HOX in the aroma installer
12. and then it just boots on htc logo then back into recovery?!?
Also the weird thing is only sense-based roms don't work? And all the sense-based roms i have tried use aroma installer, maybe this could be to do with it?
First install rom then boot.img.
Sent from my HTC One X
did u full wipe inside aroma + what rom ver you are using maybe you are flashing an update or what hboot you are on ?
Ok will try now...
TToivanen said:
First install rom then boot.img.
Sent from my HTC One X
Click to expand...
Click to collapse
Ok i will try now and report back my results.
Thanks for possible anwser
i used to install ROM before flashing the boot.img and erasing cache... if i flash boot.img before sometimes i'm stuck in bootloop...
the boot.img has to be extracted from the rom itself... also try to flash other different roms
It is...
The5alodi said:
did u full wipe inside aroma + what rom ver you are using maybe you are flashing an update or what hboot you are on ?
Click to expand...
Click to collapse
I will try now a full wipe and it is not a update as far as i am aware of. the file is called: ViperX_v2.0.0
And my hboot is:
HBOOT-1.12.0000
I have done this...
Iacopo91 said:
i used to install ROM before flashing the boot.img and erasing cache... if i flash boot.img before sometimes i'm stuck in bootloop...
the boot.img has to be extracted from the rom itself... also try to flash other different roms
Click to expand...
Click to collapse
I have done this?!?
try the latest i think its 2.7 or check ARHD because your problem is weird
ok i willl
The5alodi said:
try the latest i think its 2.7 or check ARHD because your problem is weird
Click to expand...
Click to collapse
Ok i will have to download it and its 647mb which will take me 1hr to 1hr and 30mins so will report back when i try to install it.
ok i am going to watch real Madrid match so P.M me i will help dont worry
ok thanks very much!!!!!!!!
The5alodi said:
ok i am going to watch real Madrid match so P.M me i will help dont worry
Click to expand...
Click to collapse
Ok i will do
Its working now!!!
Everyone thanks for helping i think i was instally a update not the actual rom !?! silly me !!!
Thanks again!

[Q] please help me error after upgrading hbot

my one x is HTC_622 hboot 1.36
now, my one x cant get into the android
before the error, my one x is android 4.0 custom rom
and i want to upgrade to 4.1
and i tried this one http://forum.xda-developers.com/showthread.php?t=1660807
and i tried http://forum.xda-developers.com/showthread.php?t=2009525
unfortunately, i forgot the ruu will clear my sdcard. and i dont have the zip file in the sd card
i cant trun on my phone into android, so i cant put the zip to sd card
so i run the ruu of radio 2.12 again in order to get back the stock rom
but it failed.
how to slove this problem.
kelvin1hui said:
my one x is HTC_622 hboot 1.36
now, my one x cant get into the android
before the error, my one x is android 4.0 custom rom
and i want to upgrade to 4.1
and i tried this one http://forum.xda-developers.com/showthread.php?t=1660807
and i tried http://forum.xda-developers.com/showthread.php?t=2009525
unfortunately, i forgot the ruu will clear my sdcard. and i dont have the zip file in the sd card
i cant trun on my phone into android, so i cant put the zip to sd card
so i run the ruu of radio 2.12 again in order to get back the stock rom
but it failed.
how to slove this problem.
Click to expand...
Click to collapse
1.Flash custom recovery http://download.clockworkmod.com/rec...-endeavoru.img ( Fastboot flash recovery nameofrecoveryfile.img) make sure youre in fastboot folder.
2.Go to Fastboot mode holding power and volume button simultaneously.
3. Select recovery mode.
4. Go to mount and storage < Mount usb storage.
Copy the ROM of your choice.
5. Flash the boot.img - fastboot flash boot boot.img
Note: Use any custom JB rom of your choice
Hope it helps.
thx
but another problem happened
after i installed viper 3.2, i cant get any phone signal, that means i cant connect to internet wif hspa or cant phone
do you know how to slove this? i cant use viper3.2 in hong kong?
kelvin1hui said:
thx
but another problem happened
after i installed viper 3.2, i cant get any phone signal, that means i cant connect to internet wif hspa or cant phone
do you know how to slove this? i cant use viper3.2 in hong kong?
Click to expand...
Click to collapse
have you flashed the rom's boot.img?
matt95 said:
have you flashed the rom's boot.img?
Click to expand...
Click to collapse
yes, i confirmed twice
kelvin1hui said:
yes, i confirmed twice
Click to expand...
Click to collapse
Try flashing the boot.img only, make sure to clean cache and dalvik cache.
Under mobile network try to do a manual search.
ashishchandra said:
Try flashing the boot.img only, make sure to clean cache and dalvik cache.
Under mobile network try to do a manual search.
Click to expand...
Click to collapse
fastboot erase cache?
kelvin1hui said:
fastboot erase cache?
Click to expand...
Click to collapse
That's always good to do, but Matt means the cache and dalvik cache that you can wipe in the recovery
kelvin1hui said:
fastboot erase cache?
Click to expand...
Click to collapse
yes from fastboot as well as from recovery !!
Hmmm i am starting to lose the confidence in the hboot firmware update. I am seeing more and more reports of this problem. My opinion :
its always the best thing to update officially with a nandroid backup !
This way you avoid radio/ril problems ..... but its to late for that now, the solution ..... I don't have it
Try to flash from scratch again, wipe ALL from recovery even format the sdcard and copy only the rom.zip back on it.
Flash the boot.img and install this script right before you install the rom !
http://db.tt/eLoVUcRc
(Install it the same way as a rom - install zip from sdcard and continue to install it)
Then the rom, and also choose in the aroma full wipe and also very important (this might be the problem!!!) The question about the custom kernel ....choose NO !
You could try getRIL from play store.
Sent from my One X
:laugh::laugh::laugh:
every problem solved now ,after i follow all steps that you guys recommend
now im using viper 3.2 now
i hope i dont need to upgrade hboot again when 4.2 or 5.0 released
Nice !
kelvin1hui said:
:laugh::laugh::laugh:
every problem solved now ,after i follow all steps that you guys recommend
now im using viper 3.2 now
i hope i dont need to upgrade hboot again when 4.2 or 5.0 released
Click to expand...
Click to collapse
Good Luck mate, you will learn a lot from all . :good:

[Q] Help my HOX stuck "quietly brilliant" when to Root ViperX 3.3.1

Help please help me,..
when going root to viperx 3.3.1 my HOX stuck in logo "HTC quietly brilliant"
i thing because My HOX S-on ......
for my HOX use hboot 1.36
My cid htc_044
if anyone can give solution.....
please give me solution.......
Did you flash the boot.img ?
Mr Hofs said:
Did you flash the boot.img ?
Click to expand...
Click to collapse
yes i use boot.img but stuck again,... please help me....
Do a full wipe in recovery before you flash the rom
Clockworkmod recovery ?
Wipe cache partition
Wipe data/factory reset
Advanced - wipe dalvik cache
Mounts & storage - format cache, data, system
Flash the boot.img
Fastboot flash boot boot.img
Then flash the rom.zip and choose in the installer about the custom kernel NO !!!
Xperia™S said:
yes i use boot.img but stuck again,... please help me....
Click to expand...
Click to collapse
do you get acces to cwm recovery.
If so try installing an other rom ( try something without sense like cm10 rom). an don t forget to flash boot.img after it.
Mr Hofs said:
Do a full wipe in recovery before you flash the rom
Clockworkmod recovery ?
Wipe cache partition
Wipe data/factory reset
Advanced - wipe dalvik cache
Mounts & storage - format cache, data, system
Flash the boot.img
Fastboot flash boot boot.img
Then flash the rom.zip and choose in the installer about the custom kernel NO !!!
Click to expand...
Click to collapse
yes i always using prosedur step by step in viper developer like you but stuck again...
i try download viper3.3.1.zip again because i thing there are some files korupt.....
Bloodbreed said:
do you get acces to cwm recovery.
If so try installing an other rom ( try something without sense like cm10 rom). an don t forget to flash boot.img after it.
Click to expand...
Click to collapse
i always using prosedur in viper developers but i cant finish to instal,....
Check the MD5 after the download too !
Mr Hofs said:
Check the MD5 after the download too !
Click to expand...
Click to collapse
how do I check the md5???
Google on checksum checker or let the winrar calculate the MD5 number and match it with the MD5 on the OP of the viper x thread
Mr Hofs said:
Google on checksum checker or let the winrar calculate the MD5 number and match it with the MD5 on the OP of the viper x thread
Click to expand...
Click to collapse
yes i finish int my instalation,..
it is true there are some corrupt files because when I extract the files in the windows there was a notice on the winrar files that some error....... thanks for your intruction,.......
So its working now i understand ?
Oke i now thanks for your helping for me.....
Sent from my HTC One X using XDA Premium HD app
Cool !
CASE CLOSED !
Yes closed the tread...
Sent from my HTC One X using XDA Premium HD app

[Q] switching ROMs

well i got know the ROM blade.
and it got some bugs so i want to replace it to mik project X rom..
do i need to do the same thing as i installed the blade rom?
or i need to do something else..
and can u get a guild how to install rom agine? i kinda forgot..
1. Flash the boot.img via fastboot and then fastboot erase cache
2. Go to recovery and wipe data/cache/dalvic and format /system
3. Flash rom.zip via recovery
4. Reboot!
vin4yak said:
1. Flash the boot.img via fastboot and then fastboot erase cache
2. Go to recovery and wipe data/cache/dalvic and format /system
3. Flash rom.zip via recovery
4. Reboot!
Click to expand...
Click to collapse
thank's you!
and my Hboot ver. is 1.36.
ok isn't it?
Ron312123 said:
thank's you!
and my Hboot ver. is 1.36.
ok isn't it?
Click to expand...
Click to collapse
Yes, it's fine!
You can flash any rom out here!
Hboot sounds good to me.
I recommend doing a nandroid backup first so if anything goes wrong you can just restore from it but mind flashing your old boot.img again.
land.apfel said:
Hboot sounds good to me.
I recommend doing a nandroid backup first so if anything goes wrong you can just restore from it but mind flashing your old boot.img again.
Click to expand...
Click to collapse
thanks i did an recovery one.. i hope everything goes ok.. for know its seems it dosent.. ill try doing it agine..
nvm! its worked.. i just reset it!
thanks!
that ROM look awsome

Problems installing CM11 - stuck at startup screen

Hi Guys.
I have some problems installing CM11 on my
HTC One X - endeavoru
I have tried both installting
cm-11-20140204-NIGHTLY-endeavoru.zip
cm-11-20140203-NIGHTLY-endeavoru.zip
I use Colckworkmod v. 6.0.4.5 as recovery
Before install CM i
Wipe userdata
Wipe Cache
Wipe Dalvik Chace
Install CM.zip
Install GApps.zip
After installing i reboot but it keeps looping in startup screen with the Cyanogen logo
I have tried to restart / factory reset but i doenst work
Any ideas ?
Thanks in advance.
izemate said:
Hi Guys.
I have some problems installing CM11 on my
HTC One X - endeavoru
I have tried both installting
cm-11-20140204-NIGHTLY-endeavoru.zip
cm-11-20140203-NIGHTLY-endeavoru.zip
I use Colckworkmod v. 6.0.4.5 as recovery
Before install CM i
Wipe userdata
Wipe Cache
Wipe Dalvik Chace
Install CM.zip
Install GApps.zip
After installing i reboot but it keeps looping in startup screen with the Cyanogen logo
I have tried to restart / factory reset but i doenst work
Any ideas ?
Thanks in advance.
Click to expand...
Click to collapse
have you flashed boot.img via fastboot and then erased cache (always via fastboot)?
lukes91 said:
have you flashed boot.img via fastboot and then erased cache (always via fastboot)?
Click to expand...
Click to collapse
Yes Lukes is right. This is the typical issue if you didn't flash boot.img AND erased the cache. Give it a go, it'll fix it for sure.
fixed
Yep it did the trick ! now it works fine.
What are your experience with updating nightly builds.
Can i just update them through CMs update manager or is it best to flash from scratch.
Sorry, always used sense roms on HOX
Sent from my Venomed HOX using XDA Premium 4 Chocolate Orange
You may flash boot.img before reboot your phone.
Sent from my HTC One X using xda app-developers app
izemate said:
Yep it did the trick ! now it works fine.
What are your experience with updating nightly builds.
Can i just update them through CMs update manager or is it best to flash from scratch.
Click to expand...
Click to collapse
mrkizy said:
You may flash boot.img before reboot your phone.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Read all posts hehe
izemate said:
Yep it did the trick ! now it works fine.
What are your experience with updating nightly builds.
Can i just update them through CMs update manager or is it best to flash from scratch.
Click to expand...
Click to collapse
Hi,
I am have the same problem except my HTC OneX is in a loop on the HTC screen. Can you please tell me how you flashed the boot.img and also from where did you get this file ?
aduly123 said:
Hi,
I am have the same problem except my HTC OneX is in a loop on the HTC screen. Can you please tell me how you flashed the boot.img and also from where did you get this file ?
Click to expand...
Click to collapse
Why do people mess around even before reading !!!
You flash a boot.img via fastboot commands on the pc. The boot.img is located inside the rom.zip file !
I strongly suggest you start reading here
http://forum.xda-developers.com/showthread.php?t=1832891
Mr Hofs said:
Why do people mess around even before reading !!!
You flash a boot.img via fastboot commands on the pc. The boot.img is located inside the rom.zip file !
I strongly suggest you start reading here
http://forum.xda-developers.com/showthread.php?t=1832891
Click to expand...
Click to collapse
Thanks Mr Hofs,
I flashed the boot.img after installing the ROM and then I erased the cache and rebooted the device and Vola - IT WORKED.
aduly123 said:
Thanks Mr Hofs,
Just one more question, do I flash before or after installing the rom.zip ?
Click to expand...
Click to collapse
You mean the boot.img ? Doesn't matter, can be done before or after.
I usually do it before.....just a habit.

Categories

Resources