Hi all,
I have been using a N7100 for nearly a year now, and this is the first time this has happened to me.
I am currently running stock 4.1.2.
When i try and connect any bluetooth device (apart from a bluetooth adaptor for my speakers) to my device, it pairs fine, when i click on the paired device to connect it, it just doesnt do anything.
When i used to click on it, it would say its connecting, and then connect, but now it just says paired, and doesnt do anything.
I have tried connecting it with my HTC 8X, Galaxy S2, and Alienware M17x, and its the same for all of them. but if i try pairing it with my fission (cheap brand) bluetooth adaptor, it says its "connected to media audio". and i can play music thru the external speakers.
But it wont work with any other device.
Can anyone tell me what i am doing wrong??.
Does anyone know a fix for this issue?.
I have tried flashing to different versions of stock firmware, but it doesnt help.
Thanks in advance
Cheers
Corey
Related
Situation:
I'm using a Xlink bluetooth gateway in my house to connect my phone with and I also have a Mazda CX-5 with integrated Bluetooth system with the latest update from TomTom and Mazda. In the Mazda, I use the Bluetooth mainly for the phone, but occasionally use it to stream audio.
Phone:
T-Mobile samsung S2 x SGH-T989D with ICS 4.0.4 (Rogers leak)
Issues:
At first (With official Gingerbread)... everything was working fine. Both device paired and all functionality worked.
Then, applied official ICS update from Kies software ICS 4.0.3 and Bluetooth issues started. I first paired my Xlink device. So far it worked. Then tried to pair my Mazda, everything was really slow but managed to have it work. Turn the car off, get back in the house and the phone is now able to pair with my Xlink device, but cannot connect as a phone audio. Even if I go manually in the Bluetooth menu and try to activate the Phone audio it wont work. Only way to have it work again is to unpaired the Mazda and reboot.
After reboot, the phone works great in the house with my Xlink device. Going back to my car and try to pair my Mazda. Same issue. The phone does pair with the Mazda, but I'm unable to make a call since the phone cannot activate the Phone audio.
Look online and have tried the ICS 4.0.4 (Rogers leak) and same issue with Bluetooth.
The only way my devices works perfectly is when I only pair with one device at a time. There is something happening when you pair more than one device, even if not both device are turned on or in range.
Anybody got the same issue or a fix to that?
Thank you and sorry if my post is a little long... but that issue is the only thing that make me not enjoy my phone.
I have Galaxy NEXUS yakju, otad stock 4.1.1 stock everything. But every time I try to connect to my platronics k100 it doesn't show on the list. I have to reboot both devices several times before my gnex sees the platronics. I then go to pair the device but I get cannot connect to pk100 either wrong pin or passkey. I cannot find away to enter a passkey. I tried clearing the Bluetooth cache to see if that helps but nothing. Anyone else have this issue? Anyone have a fix? Could this be because of the new radio that dropped? I never had this issue with ICS.
I'm also stock 4.1.1 GNex. I had perfect BT behavior with several devices with ICS, now have a problem with my car's built-in BT hands-free phone (2007 BMW 328). Pairing is fine. About every other phone call I'm told they can barely hear me over the noise but my audio is fine. I've paired and unpaired, and I did a complete wipe before installing JB. Very frustrating since everything worked great with ICS. Also no problems with 2 other BT headsets and connecting to 2 different PCs via BT.
Hello,
Did either on of you find a fix for this?
Thanks in advance
Bluetooth Connectivity Problem
I Am Not able to receive files via bluetooth In my G-NEX
When SOmeone tries to send it it shows "Content Not supported" when it was sent from HTC ONE X And Display that "Transfer Complete " when tried from HTC ONE V
Please help me with the problem!!!
I've tried to connect my phone via BT to two different cars and have no luck. It will scan for devices but won't find them at all. Does this happen to anyone else with the SIII? Strangely enough, it finds and connects to my JamBox is just fine.
What ROM are u on ? Stock or rooted?
What kind of cars I know my Audi A8 will connect but I always have to connect manually and enter the 1234 paswrd.
Sent from my SAMSUNG-SGH-I747 using xda premium
bbgt2 said:
What ROM are u on ? Stock or rooted?
What kind of cars I know my Audi A8 will connect but I always have to connect manually and enter the 1234 paswrd.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Still rocking the stock and unrooted for the phone. I tried on a Lexus GS and a Scion xB but no results show up. How do you connect manually? I should try that
Phone calls and bluetooth streaming works fine in my 2009 Mazda 6 (GT, no navigation). My phone is stock + root.
I use Slacker Radio everyday, launched by Automateit Pro when the connection to my car is established.
IIRC, I had to input a PIN on my phone, then in my car to do the pairing, and after that, I had to connect the phone manually to the stereo, but only once. After that, it's automatic when I start the car. Watch out for the "Only visible to paired devices" setting on your phone. It must not be checked.
I too have major issues with bluetooth, my phone connects whenever it feels like. I had to flash to cm9 to be able to listen to music in my G37. No problems in my other car (it has aftermaket pioneer system).
PS Just flashed the CM10 since they finally figured out A2DP, but the image is broken. (Note to myself: "Read the thread before flashing") Will wait for the next nightly build.
Nissan's always had a horrid BT stack in it. I'm in an 09 Altima and BT just sucks. I know it's not the phone as I've tried multiple phones from multiple vendors and they all suck. Nissan won't fix it either.
[Q] Bluetooth issue with Cars
I have AKOP Rom and KT Kernel. My bluetooth connectin to Mazda Cx-5 is fine. However, the problem I have is a lot of phone information (Song title, Battery Status) I used to have on stock, now are gone. Previously, I can fast foward or Rewind a song, also, once BT is connected, the default music player will start automatically
Can someone suggest a BT manager app which can change and enhance BT setting?
I have a 2009 Mercedes B200. My phone connects to the car just fine, but no sound comes from the speakers and no sound goes into the microphone. Same thing with my car and the HTC One X, although that was fixed with a stock ROM update. Bluetooth on cars can be very hit and miss.
Hi guys, question. My Nexus plays music through my aftermarket stereo fine through bluetooth but my annoyance is that the info doesn't show up. ie artist name, songs etc. While my ipod shows it all. I've read that it's just bluetooth firmware on the stereo/iphone/android but it's still such a pain in the a** that Iphone has the benefits while Android being better doesn't get as much. =( My question is do any bluetooth guru's out there know of a workaround or way to have info show up. My next step is trying different players etc.
The data needs to be sent by the application playing the music. I've found that Apollo will send this data to the screen on my 2012 Civic, the stock player does not.
I think certain ROMs have the latest bluetooth firmware. I think CM9 does? Not positive. I would also like to know if there was some way to update the firmware, on any ROM.
Cheesejam said:
I think certain ROMs have the latest bluetooth firmware. I think CM9 does? Not positive. I would also like to know if there was some way to update the firmware, on any ROM.
Click to expand...
Click to collapse
My GN wont connect for Bluetooth Audio (A2DP bluetooth receiver plugged into car ipod dock) - I have tried and tried, different roms, etc, no luck - my 3 year old Droid X works just fine, but my 8 month old Nexus wont connect - WTF. I enter password, get error that unable to pair.
My phone pairs to the car bluetooth phone no problem, but will not pair to audio.
Any suggestions???
Thanks!
Hoping someone can help shed some light. Googling didn't turn up anything. My S6 after the 5.1.1 update, bluetooth is borked. It is connected to my Sony Smartwatch 3, Gear 2 Neo, and was connected to my Fibit Charge HR and Microsoft band. The Fitbit Charge HR got a firmware update and then would not pair with my S6, but would pair with my work iPhone. So I thought it was defective. But it pairs with my old S5. So I went into bluetooth settings and did a scan and it will not see it. So, I stupidly unpaired my microsoft band and now it's now recognized at all. The SW3, G2 Neo are paired, as well as my Sync in my car, but show up in bluetooth as "Not Connected" even though they are. This is frustrating and I don't want to go back to my S5. Everything else seems to work okay - just the bluetooth. Anybody have any thoughts? I'm on the latest OTA, OFE.
SO no one's got any ideas. I have wiped cache both while normally running and by booting into recovery. Bluetooth still hosed. Would a factory reset help?
Saafir said:
@kbboykin Does your devics keep a bluetooth pairing history? If so delete it and try again. Have to do that with a lot of my devics
Click to expand...
Click to collapse
I don't think it does. See screenshot. All of these devices are paired and connected, but bluetooth says they are "Not Connected".