Develop Bugs

[Q] HTC Desire GSM / CM 7.1.0 - Bluetooth issues

Hi all
I've searched for this issue on the forums but can't find anything that addresses my particular problem. I was wondering if anyone had any thoughts or suggestions.
I'm running CM 7.1.0 stable on my HTC Desire GSM and all is well - all except bluetooth. I don't seem to be able to pair with any devices.
The particular device I'm trying to pair with at present is a PLT BB903+ headset. I know the device works fine since I was able to pair with it when I was running stock Sense and I can pair with it using my wife's BlackBerry without any issues.
The device always appears in my list of found devices, whether it's in pairing mode or not, and even if it's switched off. I've wiped my Bluetooth pairing data using Titanium Backup but it still appears there as "Paired but not connected". Trying to connect fails but no error message appears. Unpairing then repairing has the same result - failure, no error message, and the next time I scan for devices it still appears as "Paired but not connected".
I've installed "Bluetooth File Transfer" from the Market as suggested elsewhere. When I attempt to pair using this I get the message "Pairing operation was aborted by user".
Any thoughts? Anyone had similar issues, resolved or otherwise?
Miz.

Please use the Q&A Forum for questions Thanks
Moving to Q&A

Bluetooth issues
Mizake said:
Hi all
I've searched for this issue on the forums but can't find anything that addresses my particular problem. I was wondering if anyone had any thoughts or suggestions.
I'm running CM 7.1.0 stable on my HTC Desire GSM and all is well - all except bluetooth. I don't seem to be able to pair with any devices.
The particular device I'm trying to pair with at present is a PLT BB903+ headset. I know the device works fine since I was able to pair with it when I was running stock Sense and I can pair with it using my wife's BlackBerry without any issues.
The device always appears in my list of found devices, whether it's in pairing mode or not, and even if it's switched off. I've wiped my Bluetooth pairing data using Titanium Backup but it still appears there as "Paired but not connected". Trying to connect fails but no error message appears. Unpairing then repairing has the same result - failure, no error message, and the next time I scan for devices it still appears as "Paired but not connected".
I've installed "Bluetooth File Transfer" from the Market as suggested elsewhere. When I attempt to pair using this I get the message "Pairing operation was aborted by user".
Any thoughts? Anyone had similar issues, resolved or otherwise?
Miz.
Click to expand...
Click to collapse
I wish someone could reply on this..... I have the same problem. Is it an issue with the Radio??
appreciate any help

There sometimes is a Reset-Button on under the Panel. Take it off and see if there is something.
i`m on 7.1.0 and my bluetooth works fine pairing with an alpine CDE-133BT.
But i have a different Issue:
a crackling and swishing noise in the background as soon as the bluetooth-channel opens for a2dp... with loud music it`s not hearable but with soft and quiet music it`s so annoying!
tried cm7 stock kernel, different Manu`s and Tiamat`s and i flashed the latest Radio... I think i try a different ROM... let`s see...

[Q] Bluetooth pairing no longer working with official ICS update => What should I do

[Q] Bluetooth pairing no longer working with official ICS update => What should I do
Hi guys,
I upgraded my Arc S and it's now running the official ICS update from Sony.
But now I can't pair my car's bluetooth system anymore (Alfa Blue&Me system).
The phone can see the bluetooth car kit but can't pair with it: tries for one second and stops, never even prompts for the pin code.
This worked perfectly in GB.
Other phones (samsung galaxy s2 and htc one x) with ICS do work with the car, so it's something with this ROM.
Could I resolve this issue by trying another ROM ?
Has this anything to do with the baseband version (70) ?
Any advice is welcome !

I got this problem before I also blamed for Sony too
But I found a solution finally
Try to deauthorize and reauthorize your phone again
The old setting of your phone conflict with ics

Hi,
I did that already, completely wiped the config from the car but won't pair
Nick

Bluethooth pairing no longer working with official ICS update
Hi there, did you manage to fix the problem with bluetooth? i have exactly the same problem. i have done a factory reset 3 times already and i'm really getting frustrated. please help i would really appreciate it.

I am having the same problem...any help?

same problem here

have the same problem after upgrading my boss's arc to ics, cant connect to car Bluetooth set, connection to a computer works fine, SGS2 connects to the set without any problems, the problem is that the phone in pairing mode doesn't get to the pin screen.
any news regarding this problem?

Have any of you looked at your car makers help sites for help?

nickdd said:
Hi guys,
I upgraded my Arc S and it's now running the official ICS update from Sony.
But now I can't pair my car's bluetooth system anymore (Alfa Blue&Me system).
The phone can see the bluetooth car kit but can't pair with it: tries for one second and stops, never even prompts for the pin code.
This worked perfectly in GB.
Other phones (samsung galaxy s2 and htc one x) with ICS do work with the car, so it's something with this ROM.
Could I resolve this issue by trying another ROM ?
Has this anything to do with the baseband version (70) ?
Any advice is welcome !
Click to expand...
Click to collapse
A workaround as been found:
Open contacts,send one via bluetooth,chose your bluetooth device,now it ask for pin code.....voilà!
Inviato dal mio ST18i

[Q] Multiple device over Bluetooth issues since ICS

Situation:
I'm using a Xlink bluetooth gateway in my house to connect my phone with and I also have a Mazda CX-5 with integrated Bluetooth system with the latest update from TomTom and Mazda. In the Mazda, I use the Bluetooth mainly for the phone, but occasionally use it to stream audio.
Phone:
T-Mobile samsung S2 x SGH-T989D with ICS 4.0.4 (Rogers leak)
Issues:
At first (With official Gingerbread)... everything was working fine. Both device paired and all functionality worked.
Then, applied official ICS update from Kies software ICS 4.0.3 and Bluetooth issues started. I first paired my Xlink device. So far it worked. Then tried to pair my Mazda, everything was really slow but managed to have it work. Turn the car off, get back in the house and the phone is now able to pair with my Xlink device, but cannot connect as a phone audio. Even if I go manually in the Bluetooth menu and try to activate the Phone audio it wont work. Only way to have it work again is to unpaired the Mazda and reboot.
After reboot, the phone works great in the house with my Xlink device. Going back to my car and try to pair my Mazda. Same issue. The phone does pair with the Mazda, but I'm unable to make a call since the phone cannot activate the Phone audio.
Look online and have tried the ICS 4.0.4 (Rogers leak) and same issue with Bluetooth.
The only way my devices works perfectly is when I only pair with one device at a time. There is something happening when you pair more than one device, even if not both device are turned on or in range.
Anybody got the same issue or a fix to that?
Thank you and sorry if my post is a little long... but that issue is the only thing that make me not enjoy my phone.

[Q] BlueTooth & Cars

I've tried to connect my phone via BT to two different cars and have no luck. It will scan for devices but won't find them at all. Does this happen to anyone else with the SIII? Strangely enough, it finds and connects to my JamBox is just fine.

What ROM are u on ? Stock or rooted?
What kind of cars I know my Audi A8 will connect but I always have to connect manually and enter the 1234 paswrd.
Sent from my SAMSUNG-SGH-I747 using xda premium

bbgt2 said:
What ROM are u on ? Stock or rooted?
What kind of cars I know my Audi A8 will connect but I always have to connect manually and enter the 1234 paswrd.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Still rocking the stock and unrooted for the phone. I tried on a Lexus GS and a Scion xB but no results show up. How do you connect manually? I should try that

Phone calls and bluetooth streaming works fine in my 2009 Mazda 6 (GT, no navigation). My phone is stock + root.
I use Slacker Radio everyday, launched by Automateit Pro when the connection to my car is established.
IIRC, I had to input a PIN on my phone, then in my car to do the pairing, and after that, I had to connect the phone manually to the stereo, but only once. After that, it's automatic when I start the car. Watch out for the "Only visible to paired devices" setting on your phone. It must not be checked.

I too have major issues with bluetooth, my phone connects whenever it feels like. I had to flash to cm9 to be able to listen to music in my G37. No problems in my other car (it has aftermaket pioneer system).
PS Just flashed the CM10 since they finally figured out A2DP, but the image is broken. (Note to myself: "Read the thread before flashing") Will wait for the next nightly build.

Nissan's always had a horrid BT stack in it. I'm in an 09 Altima and BT just sucks. I know it's not the phone as I've tried multiple phones from multiple vendors and they all suck. Nissan won't fix it either.

[Q] Bluetooth issue with Cars
I have AKOP Rom and KT Kernel. My bluetooth connectin to Mazda Cx-5 is fine. However, the problem I have is a lot of phone information (Song title, Battery Status) I used to have on stock, now are gone. Previously, I can fast foward or Rewind a song, also, once BT is connected, the default music player will start automatically
Can someone suggest a BT manager app which can change and enhance BT setting?

I have a 2009 Mercedes B200. My phone connects to the car just fine, but no sound comes from the speakers and no sound goes into the microphone. Same thing with my car and the HTC One X, although that was fixed with a stock ROM update. Bluetooth on cars can be very hit and miss.

bluetooth pairing issues / delete paired devices

Hey guys,
since I bought my bluetooth headphones (Wearhaus Arc), which are actually pretty cool, I have lots of troubles with them.
When I paired my phone (HTC One M8 running latest official stock unbranded Android 6.0) with the headphones the first time, everything was great.
While using them from day to day I was faced with connection issues. That means, that both my phone and headphones are on, but it takes (almost everytime) a couple of tries to connect them. Even if I tap in the saved devices on the headphone, the connect could not be established. Turning off and on the headphones and bluetooth on my phone was the only way to fix it.
If I finally had a connection, everything was fine. In a few very rare cases, the connection worked at the first go.
Some weeks ago, a new firmware for the headphones was released, so I wanted to install them. During the update process, the updater (Android app) said, that the verifcation failed and the firmware cound no be updated. Same behaviour with the Windows 10 app. Even with another phone it did not work. Seems like, something is wrong with the headphones.
So I contacted the support again (first time they gave me the advice to use the Windows 10 app to update firmware) and told me, that I have to return it for repair. The gave me a return label etc. and I sent it back.
After waiting a few weeks I finally got it back. With zest I turned them on, but the joy was marred, because my phone did not recognize them.
Before sending them back, I unpaired the headphones in order to start over with the new ones. Maybe this was the mistake...
I did some pairing testing with other phones (HTC Sensation, BlackBerry Q10, HTC HD2), which found the headphones immediately and worked fine. So my guess is, that only my M8 has a problem with them.
Pairing, unpairing and "repairing" (pairing again) between my M8 and the other mentioned phones worked well, so there cannot be an general bluetooth issue.
After doing a factory reset on my M8 I'm a step futher, because now the phone sees the headphones (somethimes), but it isn't able to establish a connection. In case I see it, I tap on the available devices, the phone tries to connect, but a second later I get the message: "unable to pair. Make sure your devices are on and discoverable, and then try pairing again". Rebooting the phone does not work. I also cleared the data and cache of the bluetooth share app and performed a network reset like described here: http://forum.xda-developers.com/htc-one-m8/help/htc-one-m8-bluetooth-wont-android-6-0-t3340279
My question to guys is, what can I do, to get the headphones to work?
Is it possible, that on the phone is still a piece of information left about the former connection, which refuses any new connection?
Is there a file on the phone, which stores the bluetooth connections? if yes, maybe deleting or editing the file could help?
Thank you in advance!
@@RON

Anyone an idea?
Sent from my HTC One_M8 using Tapatalk