Situation:
I'm using a Xlink bluetooth gateway in my house to connect my phone with and I also have a Mazda CX-5 with integrated Bluetooth system with the latest update from TomTom and Mazda. In the Mazda, I use the Bluetooth mainly for the phone, but occasionally use it to stream audio.
Phone:
T-Mobile samsung S2 x SGH-T989D with ICS 4.0.4 (Rogers leak)
Issues:
At first (With official Gingerbread)... everything was working fine. Both device paired and all functionality worked.
Then, applied official ICS update from Kies software ICS 4.0.3 and Bluetooth issues started. I first paired my Xlink device. So far it worked. Then tried to pair my Mazda, everything was really slow but managed to have it work. Turn the car off, get back in the house and the phone is now able to pair with my Xlink device, but cannot connect as a phone audio. Even if I go manually in the Bluetooth menu and try to activate the Phone audio it wont work. Only way to have it work again is to unpaired the Mazda and reboot.
After reboot, the phone works great in the house with my Xlink device. Going back to my car and try to pair my Mazda. Same issue. The phone does pair with the Mazda, but I'm unable to make a call since the phone cannot activate the Phone audio.
Look online and have tried the ICS 4.0.4 (Rogers leak) and same issue with Bluetooth.
The only way my devices works perfectly is when I only pair with one device at a time. There is something happening when you pair more than one device, even if not both device are turned on or in range.
Anybody got the same issue or a fix to that?
Thank you and sorry if my post is a little long... but that issue is the only thing that make me not enjoy my phone.
Related
Bluetooth cuts in and out when connected to 2 devices (car's "phone" and "media")
I have a GSM Galaxy Nexus on stock Jellybean, and bluetooth streaming works great in my car (Chevy Sonic) until I also connect the "phone" connection. When it's connected, the music cuts in and out constantly. Phone calls seem to do the same thing if "media" is connected.
If I kill 1 connection, the other works great. Is this a Galaxy Nexus problem or Jellybean? I've tried stock, franco's, trinity, etc kernels but I'm guessing this won't matter (since the source was JUST released for JB).
Does anyone else pair to multiple BT devices simultaneously? Do you have issues?
I just came from an iPhone 4S, and it paired nicely with both connections without them cutting out. I hope this is something I can get working because I use both functions all the time.
Thanks!
I connect to 2 devices in my truck and it actually seems to work better since installing Jelly Bean. On ICS I had a similar problem. My truck connects via the "phone" profile and I connect to a bluetooth adapter for the "media" profile. I could use either of them independently without a problem, but with both connected, my call quality was awful and my music would cut out periodically. I believe that the truck "phone" profile was disconnecting and reconnecting every couple minutes as I would see the display on my truck indicate that a bluetooth device had just connected.
Since installing JB, that behavior seems to have stopped. I can't say for sure as I haven't driven very much yet since installing it, but early testing seems to indicate the problem has gone away. I know this doesn't help in your situation, but I did want to share my experience as it was similar to yours.
I have Galaxy NEXUS yakju, otad stock 4.1.1 stock everything. But every time I try to connect to my platronics k100 it doesn't show on the list. I have to reboot both devices several times before my gnex sees the platronics. I then go to pair the device but I get cannot connect to pk100 either wrong pin or passkey. I cannot find away to enter a passkey. I tried clearing the Bluetooth cache to see if that helps but nothing. Anyone else have this issue? Anyone have a fix? Could this be because of the new radio that dropped? I never had this issue with ICS.
I'm also stock 4.1.1 GNex. I had perfect BT behavior with several devices with ICS, now have a problem with my car's built-in BT hands-free phone (2007 BMW 328). Pairing is fine. About every other phone call I'm told they can barely hear me over the noise but my audio is fine. I've paired and unpaired, and I did a complete wipe before installing JB. Very frustrating since everything worked great with ICS. Also no problems with 2 other BT headsets and connecting to 2 different PCs via BT.
Hello,
Did either on of you find a fix for this?
Thanks in advance
Bluetooth Connectivity Problem
I Am Not able to receive files via bluetooth In my G-NEX
When SOmeone tries to send it it shows "Content Not supported" when it was sent from HTC ONE X And Display that "Transfer Complete " when tried from HTC ONE V
Please help me with the problem!!!
I've tried to connect my phone via BT to two different cars and have no luck. It will scan for devices but won't find them at all. Does this happen to anyone else with the SIII? Strangely enough, it finds and connects to my JamBox is just fine.
What ROM are u on ? Stock or rooted?
What kind of cars I know my Audi A8 will connect but I always have to connect manually and enter the 1234 paswrd.
Sent from my SAMSUNG-SGH-I747 using xda premium
bbgt2 said:
What ROM are u on ? Stock or rooted?
What kind of cars I know my Audi A8 will connect but I always have to connect manually and enter the 1234 paswrd.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Still rocking the stock and unrooted for the phone. I tried on a Lexus GS and a Scion xB but no results show up. How do you connect manually? I should try that
Phone calls and bluetooth streaming works fine in my 2009 Mazda 6 (GT, no navigation). My phone is stock + root.
I use Slacker Radio everyday, launched by Automateit Pro when the connection to my car is established.
IIRC, I had to input a PIN on my phone, then in my car to do the pairing, and after that, I had to connect the phone manually to the stereo, but only once. After that, it's automatic when I start the car. Watch out for the "Only visible to paired devices" setting on your phone. It must not be checked.
I too have major issues with bluetooth, my phone connects whenever it feels like. I had to flash to cm9 to be able to listen to music in my G37. No problems in my other car (it has aftermaket pioneer system).
PS Just flashed the CM10 since they finally figured out A2DP, but the image is broken. (Note to myself: "Read the thread before flashing") Will wait for the next nightly build.
Nissan's always had a horrid BT stack in it. I'm in an 09 Altima and BT just sucks. I know it's not the phone as I've tried multiple phones from multiple vendors and they all suck. Nissan won't fix it either.
[Q] Bluetooth issue with Cars
I have AKOP Rom and KT Kernel. My bluetooth connectin to Mazda Cx-5 is fine. However, the problem I have is a lot of phone information (Song title, Battery Status) I used to have on stock, now are gone. Previously, I can fast foward or Rewind a song, also, once BT is connected, the default music player will start automatically
Can someone suggest a BT manager app which can change and enhance BT setting?
I have a 2009 Mercedes B200. My phone connects to the car just fine, but no sound comes from the speakers and no sound goes into the microphone. Same thing with my car and the HTC One X, although that was fixed with a stock ROM update. Bluetooth on cars can be very hit and miss.
First of all, CleanROM is a wonderful ROM. I have installed it on my ATT Note 2. :good:
However I have one slight problem if you guys can help me figure it out.
My bluetooth connects perfectly to my car stereo (A Brand New Pioneer made in July 2012). I can make phone calls perfectly, but I cannot play media via bluetooth. Meaning, when I try to play music it does not send a signal to the radio.
I made some troubleshooting steps to no avail:
1. The bluetooth Media option is checked under the bluetooth settings.
2. The car stereo works perfectly with my rooted Galaxy S II with Stock ROM 2.3.5 (phone + media)
3. My Note 2 fails to send media signal to my GF's new car Stereo (2013 model). Hence this is NOT an issue of an outdated bluetooth receiver. Again here, the same issue: it connects when making phone calls, but no media playing.
4. I even unpaired all other devices from the stereo to no avail.
I am starting to think it is an issue with the ROM..Is there an app I can download or some patch to fix this, or should I try a different ROM.
It took me 2 days to finally set up everything on my phone and I would hate to have to erase all and start all over.
Thanks a lot in advance for your help.
privatewarrior1 said:
First of all, CleanROM is a wonderful ROM. I have installed it on my ATT Note 2. :good:
However I have one slight problem if you guys can help me figure it out.
My bluetooth connects perfectly to my car stereo (A Brand New Pioneer made in July 2012). I can make phone calls perfectly, but I cannot play media via bluetooth. Meaning, when I try to play music it does not send a signal to the radio.
I made some troubleshooting steps to no avail:
1. The bluetooth Media option is checked under the bluetooth settings.
2. The car stereo works perfectly with my rooted Galaxy S II with Stock ROM 2.3.5 (phone + media)
3. My Note 2 fails to send media signal to my GF's new car Stereo (2013 model). Hence this is NOT an issue of an outdated bluetooth receiver. Again here, the same issue: it connects when making phone calls, but no media playing.
4. I even unpaired all other devices from the stereo to no avail.
I am starting to think it is an issue with the ROM..Is there an app I can download or some patch to fix this, or should I try a different ROM.
It took me 2 days to finally set up everything on my phone and I would hate to have to erase all and start all over.
Thanks a lot in advance for your help.
Click to expand...
Click to collapse
I'm having the same problem different radio.
Hello there. I've been experiencing a problem with my OP3, regarding the BT connection to my car stereo.
I recently bought a new head unit for my car, a Pioneer MVH-X580BT unit, it Works fine. However, when i connect my phone to it, it allows me to playback áudio, but i won't allow me to use it for hands-free calling. The Bluetooth menu on the phone says "MVH-X580BT - Connected (no phone)". It happens with any CM-based rom that i've tried so far.
However, when i install a stock rom (Oxygen OS, Freedom OS also works), it works just fine, both audio and phone mode.
Is there something in custom roms that changes some sort of parameters in the ROM that makes the phone refuse a phone mode connection from the radio?
Any tips i can use?
Thanks!
logcat of the incident:
Here.
Hope it helps.
I've had the same problems. It's an issue with the LOS BT stack. I've created several unofficial versions of my favorite ROMs using a different BT stack that fixes this problem for me. Let me know if they work.