Develop Bugs

[q] boost on evo help

So, I just set up my Evo to work on boost. Everything works fine(including MMS) but the internet won't connect. I've searched the forums but I'm not sure if any of the answers are specific to my problems and I just want to be safe. Could someone please help me to fix this problem. I would very much appreciate it.
Also, will this stick throughout flashing different ROMS, sbf flashes, etc?
EDIT: I bought the phone already flashed, just set up my account today

Flowsick said:
So, I just set up my Evo to work on boost. Everything works fine(including MMS) but the internet won't connect. I've searched the forums but I'm not sure if any of the answers are specific to my problems and I just want to be safe. Could someone please help me to fix this problem. I would very much appreciate it.
Also, will this stick throughout flashing different ROMS, sbf flashes, etc?
Click to expand...
Click to collapse
Did you put in the HA password for profile 0 and the AAA password for profile 1?
something you can try, i had to do it myself. Restore to factory, dont let the handfree go thru until after you have put in all your info. reinput your info in service programming and then add your HA and AAA passwords. after it resets let the hands free do its thing. you can also try updating the profile... if your passwords are correct you should be good from there.

I apologize, what I actually meant to say was that I bought this phone already on boost. I just payed the bill for the first time today. I am not an android-modding noon but I have no idea what you mean HA & AAA are unfamiliar to me

Flowsick said:
I apologize, what I actually meant to say was that I bought this phone already on boost. I just payed the bill for the first time today. I am not an android-modding noon but I have no idea what you mean HA & AAA are unfamiliar to me
Click to expand...
Click to collapse
Did the internet ever work? you can try and do a profile update.
settings-system updates-update profile... this may or maynot work. since you bought the phone pre flashed the only way to get the ha and aaa would be to have the donor phone, contact the seller in hopes they will give it to you or get boost to reset it.
---------- Post added at 01:44 AM ---------- Previous post was at 01:40 AM ----------
i think i read somewhere that boost can do a reset on the phone and it will cause the internet to provision. also it may take upto 48 hours to provission.
By chance do you have another boost mobile cdma phone? if you do you can put that on your boost account, wait about 10-15 mins then put the evo back on, that should cause it to provission.

I bought it from craigslist, so I'm not sure if it worked or not. I also do not have another boost phone. How would I get boost to reset it?

you can call boost and tell them that the internet isnt working, tell them that its a incognito or whatever phone is listed on the account. they will reset it and hopefully it will provision. Its sounds to me like the internet has either not provisioned yet or the passwords are wrong. did you try the update profile trick?
as far as having another boost phone... you can search on here or google and should be able to find a meid you can use just to do the switch with.
Also you can do the meid swap on boosts website, that way they dont try to charge you for activating a phone that has been activated before.

I'm not sure if it matters, but
when I view my signal strength, it's EVDO rev A and about -81 dbm

I read what you wrote on how to do it above. Do i do a factory data reset or something like sbf flashing? And I'm lost from there.

Flowsick said:
I'm not sure if it matters, but
when I view my signal strength, it's EVDO rev A and about -81 dbm
Click to expand...
Click to collapse
ok try this and tell me what you see under evdo engineering... ##debug#
scroll all the way down til you see an/aaa authentication.
if it says 1 = authenticated, then your passwords are good the phone just needs to provission.
---------- Post added at 02:18 AM ---------- Previous post was at 02:16 AM ----------
if it is authenticated, i would search for a boost meid i could use to swap in for a few mins, then swap it back to the evo. once you switch back to the evo, it should provision then.

sxxdnne said:
ok try this and tell me what you see under evdo engineering... ##debug#
scroll all the way down til you see an/aaa authentication.
if it says 1 = authenticated, then your passwords are good the phone just needs to provission.
---------- Post added at 02:18 AM ---------- Previous post was at 02:16 AM ----------
if it is authenticated, i would search for a boost meid i could use to swap in for a few mins, then swap it back to the evo. once you switch back to the evo, it should provision then.
Click to expand...
Click to collapse
I tried this in the dialer ##23284# but nothing happened, the numbers just disappeared. I'm assuming it's supposed to be something similar to when I enter ##3282#\
Also, my attempts at a profile update failed. It didn't go through

only way i would factroy reset without having access to the donor is if i wrote down all the info needed from the evo. since its pretty much already set up you can open qpst service programming and copy everything from the first tab to the the roaming tab. thats the info you will need to put in to restore the phone back to the way it is now. also if you grab nv items 1192 1194 465 466 they contain your ha and aaa passwords. or you can open qxdm and input this code
Requestnvitemread ds_mip_ss_user_prof 0 and Requestnvitemread ds_mip_ss_user_prof 1
---------- Post added at 02:33 AM ---------- Previous post was at 02:31 AM ----------
Flowsick said:
I tried this in the dialer ##23284# but nothing happened, the numbers just disappeared. I'm assuming it's supposed to be something similar to when I enter ##3282#\
Also, my attempts at a profile update failed. It didn't go through
Click to expand...
Click to collapse
##33284# = ##debug#
---------- Post added at 02:35 AM ---------- Previous post was at 02:33 AM ----------
##debug# is the field trial menu... it will show you what your phone is doing.
evdo rev a is good -81 db can be better but it means you have reception.

sxxdnne said:
only way i would factroy reset without having access to the donor is if i wrote down all the info needed from the evo. since its pretty much already set up you can open qpst service programming and copy everything from the first tab to the the roaming tab. thats the info you will need to put in to restore the phone back to the way it is now. also if you grab nv items 1192 1194 465 466 they contain your ha and aaa passwords. or you can open qxdm and input this code
Requestnvitemread ds_mip_ss_user_prof 0 and Requestnvitemread ds_mip_ss_user_prof 1
---------- Post added at 02:33 AM ---------- Previous post was at 02:31 AM ----------
##33284# = ##debug#
---------- Post added at 02:35 AM ---------- Previous post was at 02:33 AM ----------
##debug# is the field trial menu... it will show you what your phone is doing.
evdo rev a is good -81 db can be better but it means you have reception.
Click to expand...
Click to collapse
I am very sorry about all these questions(never dealt with a flashed phone before) but
-how do I get to qpst service programming?
-"nv items 1192 1194 465 466" where would I get these?
-lastly what is qxdm and how do I get into it.
I know some of the basics of code from using Linux and such so that last part doesn't sound too difficult

I just saw your post on the ##debug#, noob mistake. but, it is showing the AN/AAA as authenticated

thats good news.... search on here, howard forums, google.... you need a meid that you can use for a few mins. just long enough for the system to reset. if you can get a meid for a boost cdma phone, goto boostmobile.com swap in the borrowed meid, then swap the evo back in after a few mins. it should provision on its own. or you can call boost and tell them you need them to reset your internet because its not working. it still may take upto 48 hours to provision but it usually doesnt take that long, at least for me it didnt.
---------- Post added at 02:51 AM ---------- Previous post was at 02:49 AM ----------
qpst and qxdm are both programs... along with cdma tools you can use them to do whatever you need to your phone including bricking it so be careful what you change when using those programs.

sxxdnne said:
thats good news.... search on here, howard forums, google.... you need a meid that you can use for a few mins. just long enough for the system to reset. if you can get a meid for a boost cdma phone, goto boostmobile.com swap in the borrowed meid, then swap the evo back in after a few mins. it should provision on its own. or you can call boost and tell them you need them to reset your internet because its not working. it still may take upto 48 hours to provision but it usually doesnt take that long, at least for me it didnt.
---------- Post added at 02:51 AM ---------- Previous post was at 02:49 AM ----------
qpst and qxdm are both programs... along with cdma tools you can use them to do whatever you need to your phone including bricking it so be careful what you change when using those programs.
Click to expand...
Click to collapse
Oh okay, I've had 3 Motorola droids, so I'm used to using RSD Lite and the command prompt to flash and push files. Thanks for the info. I'll try calling boost first, seeing as I have to leave in a few. I'll update the thread to let you know. And I really do appreciate all of your help. People like you make this forum easier to adjust to.

No problem... Good luck.... Im just paying it forward...

You'll never guess what happened. Turns out it just took a while to kick in, I didnt have to do anything. Well at least other people can use this thread

yeah sometimes it takes the system a few mins to catch up to all the phones being activated. Im glad to hear all is well, Welcome to having a fully working evo4g on boost ;-)... In the future if you have any questions, feel free to ask. I will tell you what I know, and if I dont know I will help you find the answer.

Cool, thanks

[UPDATE]
So, my I was messing around on my phone and wanted to see what happened if I attempted to use the 4G Sense widget. when i pushed it, a sprint website came up(not sure what that means) but when I turned 4G off, my internet stopped working again. i called boost to get it provisioned, but they just told me to call back on a boost handset but I don't have one. So then I viewed my boost account, and when at the upgrade handset page, I noticed that it has my phone MEID as that of an Incognito and the model as well. When I put in the MEID to my Evo, I got the notification that the MEID/ESN could not be used with Boost Mobile.
I'm not sure if the guy I bought my Evo from from changed the actual MEID, if he did then how could boost tell it wasn't a boost phone, or is that was the MEID of the donor phone used?
Either way, I need help on getting my internet provisioned and back working again. So if someone could help me out that would be great, because I'm stumped

USSD Codes

HThought I would compile a list of USSD codes for everyones reference. I have tested most if anybody has any to add please feel free.
****Warning some of these codes can be harmful( wipe data and ect.) I am not responsible for anything you do to your device****
Some of these codes may lead you to a menu use the option key (far left soft key) to navigate
Some of the functions may be locked to our use but im still working on how to use these menus more extensively
Information
*#1234# View SW Version PDA, CSC, MODEM
*#12580*369# SW & HW Info
*#197328640# Service Mode
*#06# = IMEI Number.
*#1234# = Firmware Version.
*#2222# = H/W Version.
*#272*imei#* Product code
Testing
*#0842# Vibration Motor Test Mode
*#0782# Real Time Clock Test
*#0228# ADC Reading
*#0*# General Test Mode
*#7353# Quick Test Menu
*#0842#- Vibration test*
Network
*7465625*638*# Configure Network Lock MCC/MNC
#7465625*638*# Insert Network Lock Keycode
*7465625*782*# Configure Network Lock NSP
#7465625*782*# Insert Partitial Network Lock Keycode
*7465625*77*# Insert Network Lock Keycode SP
#7465625*77*# Insert Operator Lock Keycode
*7465625*27*# Insert Network Lock Keycode NSP/CP
#7465625*27*# Insert Content Provider Keycode
*#7465625# View Phone Lock Status
*#232338# WLAN MAC Address
*#526# WLAN Engineering Mode -runs wlan tests (same as below)
*#528# WLAN Engineering Mode
*#2263# RF Band Selection-not sure about this one appears to be locked
*#301279# HSDPA/HSUPA Control Menu---change HSDPA classes (opt. 1-5)
Tools/Misc.
*#*#1111#*#*- Service Mode
#273283*255*663282*# Data Create SD Card
*#4777*8665# = GPSR Tool.
*#4238378# GCF Configuration
*#1575# GPS Control Menu
*#9090# Diagnostic Configuration
*#7284# USB I2C Mode Control—mount to usb for storage/modem
*#872564# USB Logging Control
*#9900# System dump mode- can dump logs for debugging
*#34971539# Camera Firmware Update
*#7412365# Camera Firmware Menu
*#273283*255*3282*# Data Create Menu- change sms, mms, voice, contact limits
*2767*4387264636# Sellout SMS / PCODE view
*#3282*727336*# Data Usage Status
*#*#8255#*#*- Show GTalk service monitor-great source of info
*#3214789# GCF Mode Status
*#0283# Audio Loopback Control
#7594# Remap Shutdown to End Call TSK
*#272886# Auto Answer Selection
****SYSTEM***
USE CAUTION
*#7780# Factory Reset
*2767*3855# Full Factory Reset
*#*#7780#*#* Factory data reset
*#745# RIL Dump Menu
*#746# Debug Dump Menu
*#9900# System Dump Mode
*#8736364# OTA Update Menu
*#2663# TSP / TSK firmware update
*#03# NAND Flash S/N
I found these over in the AT&T Galaxy Note section. I thought I would repost them here seeing as how every code I've tried so far works on my GS3. I have only tried a few of them. If you find some that don't work, let me know & I'll make an edit. Here's the OP.
http://forum.xda-developers.com/showthread.php?t=1953506
Big thanks to KevHuff for putting this list together.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

I've tried a random sampling of these codes and most of them don't work for me. Maybe you should sit down and test them all, instead of using members as guinea pigs.

I've tried several of these as well in the network section and the test section and they don't work

mattsternc said:
I've tried several of these as well in the network section and the test section and they don't work
Click to expand...
Click to collapse
Which ones did you try? I think that they are pretty standard for all Samaung GSMs.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Are you getting a connection problem or invalid mmi code???
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Here is a link to a similar thread on our (TMobile) side by Joederp.
Just be careful because some of these codes will work on SGH-I747 (ATT SGS3) but not on SGH-T999 (TMo SGS3), yes on N-7000 (Note1) but not on SCH-I535 (VZW SGS3). Then there are the Sammy codes that work on all variants.
With the good there is the bad too. There are some very real dangers of punching in the wrong codes i.e. wiping your Internal SD, Soft/Hard Brick, anything really. And some survive boot and some do not, so there is that too.
I had a report about this thread and wanted to make sure that the above was known.

Woodrube said:
Here is a link to a similar thread on our (TMobile) side by Joederp.
Just be careful because some of these codes will work on SGH-I747 (ATT SGS3) but not on SGH-T999 (TMo SGS3), yes on N-7000 (Note1) but not on SCH-I535 (VZW SGS3). Then there are the Sammy codes that work on all variants.
With the good there is the bad too. There are some very real dangers of punching in the wrong codes i.e. wiping your Internal SD, Soft/Hard Brick, anything really. And some survive boot and some do not, so there is that too.
I had a report about this thread and wanted to make sure that the above was known.
Click to expand...
Click to collapse
Thanks man. I appreciate it. I know that some of them can really screw things up.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

I posted something similar in another thread. I found most of them to work but since there's so many I couldn't test them all. Don't know if the lists are the same.
http://forum.xda-developers.com/showthread.php?p=31687534
Sent from my SAMSUNG-SGH-I747 using xda premium

I'm thinking maybe u should edit the list to only include working codes. Just a thought.
...sent using Tapatalk on my Galaxy SIII...

NeoTINS said:
I'm thinking maybe u should edit the list to only include working codes. Just a thought.
...sent using Tapatalk on my Galaxy SIII...
Click to expand...
Click to collapse
Yeah. That's my plan. I just haven't had the time to sit down & do it this weekend. I've been SUPER busy. I have already edited some of it.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Is there any reason none of these codes are working on my Galaxy S3? I came here trying to fix a usb issue I'm having but any code that I type in I just get "Connection problem or invalid MMI code."

I think a lot of those are for the international version. Also don't forget to use the stock dialer. And you have yo be on a touch wiz ROM.

I have a domestic GS3 and the codes I tried work fine.
Sent from my SAMSUNG-SGH-I747

AverageCanadian said:
Is there any reason none of these codes are working on my Galaxy S3? I came here trying to fix a usb issue I'm having but any code that I type in I just get "Connection problem or invalid MMI code."
Click to expand...
Click to collapse
A whole bunch of these codes do not work for me either. I have an i747m running 4.1.1 stock.
If I recall correctly, more codes worked on 4.0.4.
Does anyone have any thoughts as to why this is happening?

mrhaley30705 said:
I think a lot of those are for the international version. Also don't forget to use the stock dialer. And you have yo be on a touch wiz ROM.
Click to expand...
Click to collapse
Thanks for the feedback. Guess I'll try a touchwhiz rom. My phone wont connect to any computer any longer. Charges without issue but not data. Was hoping to use some of the USB codes to try and fix it.

Just throwing this out there, I'm not sure most the codes will work unless you are on a stock rom ... at least in my experiance. In the past [for my captivate and skyrocket] i noticed when I changed roms [cappy i ran synergy, skyrocket ran cm9] only one or two codes would work.
i didn't try any codes prior to switching my s3 to cm10 ... but i can't get any to work on my s3 now ...
~j

Useful numbers...thanks.

AverageCanadian said:
Thanks for the feedback. Guess I'll try a touchwhiz rom. My phone wont connect to any computer any longer. Charges without issue but not data. Was hoping to use some of the USB codes to try and fix it.
Click to expand...
Click to collapse
Could be a corrupted driver or a bad cable. Start by trying to update the driver first and then see if a new stock s3 cable will work.

getting invaild mmi code
how do you fix this I have a unlock code
---------- Post added at 05:22 PM ---------- Previous post was at 05:14 PM ----------
I am getting connection problem or invalid mmi code

[Q] Locking an unlocked Sprint S3

I bought a Galaxy S3 from Gazelle on eBay. Though it was listed as unrooted, it turned out to be. Because of this, Sprint could add it to their network, but the phone wouldn't go through hands free activation. We tried entering the MSL/SPC code they had on file, however the phone would not respond to it. I unrooted the phone, and installed the stock 4.3 rom. Though, it would still not take the MSL/SPC code. This led me to believe the phone is unlocked, which turned out to be correct. The SPC is 000000, and when a call is made, it forwards to Verizon's customer service.
This being said, am I correct is needing to set the SPC back to the correct one? Also, when entering ##000000# I added my phone number as the MDN, and the MSID from my previous phone as the MSID. However, the MSID did not take. It's still saying 0000009088.
I've been at this for 13 hours now, and have ran out of ideas.
DFS CDMA Tool results in an error "GET SEC_CODE CPS_ERROR BAD_SPC_MODE" when trying to change the SPC code.
Anyone have any idea?
Thanks!!!!

kf5jak said:
I bought a Galaxy S3 from Gazelle on eBay. Though it was listed as unrooted, it turned out to be. Because of this, Sprint could add it to their network, but the phone wouldn't go through hands free activation. We tried entering the MSL/SPC code they had on file, however the phone would not respond to it. I unrooted the phone, and installed the stock 4.3 rom. Though, it would still not take the MSL/SPC code. This led me to believe the phone is unlocked, which turned out to be correct. The SPC is 000000, and when a call is made, it forwards to Verizon's customer service.
This being said, am I correct is needing to set the SPC back to the correct one? Also, when entering ##000000# I added my phone number as the MDN, and the MSID from my previous phone as the MSID. However, the MSID did not take. It's still saying 0000009088.
I've been at this for 13 hours now, and have ran out of ideas.
DFS CDMA Tool results in an error "GET SEC_CODE CPS_ERROR BAD_SPC_MODE" when trying to change the SPC code.
Anyone have any idea?
Thanks!!!!
Click to expand...
Click to collapse
to be clear you do not have to "lock" your phone for a carrier to use it on any network its just them being pricks if they suggest it as they are trying to sell you something. and i would call verizon to release the phone from their system as thats probably whats causing your issue as it isnt allowing it to move off network thus preventing sprint to put it in to their system and allowing you to acctivate it. otherwise it sounds as if youve done everything else that i would suggest.
---------- Post added at 12:38 PM ---------- Previous post was at 12:34 PM ----------
also i may be asking a dumb question but is this a verizon version of the s3?

digit12345 said:
to be clear you do not have to "lock" your phone for a carrier to use it on any network its just them being pricks if they suggest it as they are trying to sell you something. and i would call verizon to release the phone from their system as thats probably whats causing your issue as it isnt allowing it to move off network thus preventing sprint to put it in to their system and allowing you to acctivate it. otherwise it sounds as if youve done everything else that i would suggest.
---------- Post added at 12:38 PM ---------- Previous post was at 12:34 PM ----------
also i may be asking a dumb question but is this a verizon version of the s3?
Click to expand...
Click to collapse
Gotcha, well I'll give that a try then. And no, it's the sprint version.

kf5jak said:
Gotcha, well I'll give that a try then. And no, it's the sprint version.
Click to expand...
Click to collapse
Well, I just got off the phone with Verizon, they asked for the HEX of the IMEI, I read the 'HEX' on the sticker on the back of the phone to them, however, they said they could not find that device ever being on any Verizon account. This came a little odd to me though. When I view the 'IMEI' in the about menu on the phone, it shows as all zeros.
EDIT: I just noticed something as I was checking what the IMEI says.. MEID in the about menu, is different than what it is on the sticker!

Registry Keys for VoLTE enable?

I've been doing some poking around with Win10M on my 830 and want to enable VoLTE so that I can place VoLTE calls on T-Mobile.
I have an RM985 device, so I get access to T-mobile LTE, but don't have all AWS bands so in LTE only areas (Becoming more common) I cannot place calls.
I found Microsoft's documentation for VoLTE & IMS settings, but cannot figure out where in the registry these are. Can someone help me figure out where to write to so that I can toggle my VoLTE settings?
https://msdn.microsoft.com/en-us/library/windows/hardware/dn772272(v=vs.85).aspx
and https://msdn.microsoft.com/en-us/library/windows/hardware/mt138319(v=vs.85).aspx
Anyone have any information?

Path:
HKLM\SOFTWARE\Microsoft\Cellular\MVSettings\IMSISpecific\Default\CellUX
Key:
ShowVoLTEToggle
Set to 1.

Techno-Freak said:
Path:
HKLM\SOFTWARE\Microsoft\Cellular\MVSettings\IMSISpecific\Default\CellUX
Key:
ShowVoLTEToggle
Set to 1.
Click to expand...
Click to collapse
Thanks for that! Looks like changing that toggle (and the one on my specific IMSI) didn't bring the toggle up in win10m. I'll keep digging though. I know the phone is VoLTE capable since the AT&T one is, but it seems I'm missing something important.
Edit:
Did some more digging, found every registry key that I need to throw in, and threw them into both the default location and the one specific to my IMS.
Turns out you need it at HKLM\SOFTWARE\Microsoft\Cellular\MVSettings\IMSISpecific\Default\CellUX\Critical instead.
Unfortunately, adding these keys, plus adding a key at HKLM\SOFTWARE\Microsoft\Cellular\MVSettings\IMSISpecific\Default\VoLTE for the two keys required hasn't made the toggle show up. I'm still digging and assume there's some other set of keys that I'm missing at this point.

I remember seeing the toggle after modifying the registry key a few months back, although it made no change for actual state of Calls on VoLTE.
Might have changed in recent builds, I could not make it show up now either.

Techno-Freak said:
I remember seeing the toggle after modifying the registry key a few months back, although it made no change for actual state of Calls on VoLTE.
Might have changed in recent builds, I could not make it show up now either.
Click to expand...
Click to collapse
Thanks for the info again.
Has anyone figured out if the 830 & other phones have the dialer options to bring up the band selection and other features like we can do on the 640 and 1520?

pizzaboy192 said:
Has anyone figured out if the 830 & other phones have the dialer options to bring up the band selection and other features like we can do on the 640 and 1520?
Click to expand...
Click to collapse
I don't know but try adding ##3282# to HKLM\SOFTWARE\Microsoft\Phone\Settings\PartnerImmediateDialStrings using CustomPFD Registry Editor; reboot and dial ##3282# ?

Does anyone knows if there is a registry key to enable call recording on all lumia phones? For now it is only possible to record call on new Lumias.
http://mspoweruser.com/record-calls-lumia-windows-10-device/

winphouser said:
I don't know but try adding ##3282# to HKLM\SOFTWARE\Microsoft\Phone\Settings\PartnerImmediateDialStrings using CustomPFD Registry Editor; reboot and dial ##3282# ?
Click to expand...
Click to collapse
Holy crap! It worked! Time to start messing around!

winphouser said:
I don't know but try adding ##3282# to HKLM\SOFTWARE\Microsoft\Phone\Settings\PartnerImmediateDialStrings using CustomPFD Registry Editor; reboot and dial ##3282# ?
Click to expand...
Click to collapse
I did it on lumia 640 xl dual sim.!! thank you.

i have a lumia 920 originally from mexico but it's sim unlocked even so i can't get the LTE bands available in my country and also after upgrading from wp8 to wp8.1 i can't connect to 2g networks only 3g so it seems like a missing registry value or a blocked one i'm trying to find it with no luck yet so if you can help me i'll appreciate it

really?
How do you able to do that? please tell me the way. I want to try it on Lumia 730
pizzaboy192 said:
Holy crap! It worked! Time to start messing around!
Click to expand...
Click to collapse

I enabled field test using the reg edit but it doesnt show a list of bands, all I can do is lock to 2-3-4g, the other toggles revert after restart

qzem said:
Does anyone knows if there is a registry key to enable call recording on all lumia phones? For now it is only possible to record call on new Lumias.
http://mspoweruser.com/record-calls-lumia-windows-10-device/
Click to expand...
Click to collapse
You need to know probably these keys from an x50 user
HKLM\Software\Microsoft\Phone\Settin\PreferredRecordingApplication
HKLM\Software\Microsoft\Phone\Setting\RecordingFeatureDisabled
Also, there is high chance that it will require more keys other than this to enable recording.

provisioning files for VoLTE for T-Mobile
Hey everyone, these are the files that are processed for provisioning the L640 (T-Mobile) to set up the phone for VoLTE. I've been looking for a way to either deploy the files, most of the core files that is needed for VoLTE is processed through the provxml which via MCSF. Attempting to hard code the MCSF to its location in the registry from the source keys fails to create the necessary folder to continue(this is with the interop unlocked L950DS). Maybe someone else on xda can help out.

Enable VoLTE in Lumia 950 DS
pizzaboy192 said:
Thanks for that! Looks like changing that toggle (and the one on my specific IMSI) didn't bring the toggle up in win10m. I'll keep digging though. I know the phone is VoLTE capable since the AT&T one is, but it seems I'm missing something important.
Edit:
Did some more digging, found every registry key that I need to throw in, and threw them into both the default location and the one specific to my IMS.
Turns out you need it at HKLM\SOFTWARE\Microsoft\Cellular\MVSettings\IMSISpecific\Default\CellUX\Critical instead.
Unfortunately, adding these keys, plus adding a key at HKLM\SOFTWARE\Microsoft\Cellular\MVSettings\IMSISpecific\Default\VoLTE for the two keys required hasn't made the toggle show up. I'm still digging and assume there's some other set of keys that I'm missing at this point.
Click to expand...
Click to collapse
Hi,
Did you managed to find any way to enable VoLTE ?
I am using Lumia 950 DS, My carrier supports VoLTE feature but in my phone there is no option to enable VoLTE. I can just use internet but no voice call.
I tried to change registry keys as well but no luck.
Please help me if anybody here managed to enable this feature.

EspHack2 said:
I enabled field test using the reg edit but it doesnt show a list of bands, all I can do is lock to 2-3-4g, the other toggles revert after restart
Click to expand...
Click to collapse
these reg edit there from long time,it can't enable field test,even if you deploy field test appx ,and open with gadget app , it limited to locking 2g/3g/4g same setting in sim settings appears in field-test app.better solution would be trying Fw that had field test on ROM.
it will look like RM-XXXX VAR NAM ( or ) RM-XXXX VAR APAC VN CV lumiafirmware.com,
locked bands in field-test will be in same state even after reboot.

L950 DS VoLTE enable..
Any one find out the Registry key for VoLTE enabling...
Pls help us.....
---------- Post added at 02:05 PM ---------- Previous post was at 01:56 PM ----------
pizzaboy192 said:
Holy crap! It worked! Time to start messing around!
Click to expand...
Click to collapse
hi.. can you help me to edit the regitry fro Enabling VoLTE on Lumia 950.???

it also seems like their is a modemconfig .nvi files that has to be loaded to the phone for the modem to configure correctly. Activating certain registry key wont actually enable some of the feature due to the modem config files. I am still looking for the Alcatel OneTouch Fierce XL windows ffu or cab list to help with enabling VoLTE or to dive deeper. I posted on the windowscentral forums, reddit, and here on xda but no one is able or I assume willing to offer up the ffu for cablist for the phone. The reasoning behind wanting the ffu or cablist for the Alcatel phone is because it is the only "official" tmobile phone that came with windows 10 mobile on it, which as we all know, the registry configurations has changed a little in windows 10 mobile from that of windows phone 8.1.

dipayans24 said:
You need to know probably these keys from an x50 user
HKLM\Software\Microsoft\Phone\Settin\PreferredRecordingApplication
HKLM\Software\Microsoft\Phone\Setting\RecordingFeatureDisabled
Also, there is high chance that it will require more keys other than this to enable recording.
Click to expand...
Click to collapse
You are wrong. I've enabled recording for voice calls and it saves it to my Phone in C:\Data\Users\Public\Recorded Calls under the name of the person you recorded.

raghulive said:
these reg edit there from long time,it can't enable field test,even if you deploy field test appx ,and open with gadget app , it limited to locking 2g/3g/4g same setting in sim settings appears in field-test app.better solution would be trying Fw that had field test on ROM.
it will look like RM-XXXX VAR NAM ( or ) RM-XXXX VAR APAC VN CV lumiafirmware.com,
locked bands in field-test will be in same state even after reboot.
Click to expand...
Click to collapse
none of that for 928 so I'm out of luck, at least I can lock to 3g now but hardly ever needed to do that anyway

How sim unlock Galaxy J500FN

Hi everyone.
I got phone from UK and i want use in PL.
I would like unlock sim card only.
Maybe I have to install new ROM and all will be good?
Any hint, please?

sever321 said:
Hi everyone.
I got phone from UK and i want use in PL.
I would like unlock sim card only.
Maybe I have to install new ROM and all will be good?
Any hint, please?
Click to expand...
Click to collapse
Sim lock is related to hardware. You can't unlock by flashing software. (Like OS)

MaDaLiNoSt said:
Sim lock is related to hardware. You can't unlock by flashing software. (Like OS)
Click to expand...
Click to collapse
sim lock is also known network lock right? but why theres a lot of cases that they successfully unlock their phone using z3x or other samsung tool box?
---------- Post added at 06:27 PM ---------- Previous post was at 06:00 PM ----------
sever321 said:
Hi everyone.
I got phone from UK and i want use in PL.
I would like unlock sim card only.
Maybe I have to install new ROM and all will be good?
Any hint, please?
Click to expand...
Click to collapse
try to flash firmware for specific country you want to use your phone, find here
http://www.sammobile.com/firmwares/
or you can dial a code *#272* "you imei no." # and choose your country code for poland choose XEO and touch install then reboot and be free :good:
I recommend the dial code cause its safer and easier for me
IT WILL FACTORY RESET YOU PHONE SO MAKE A FULL BACK-UP :good:

maxxetan said:
try to flash firmware for specific country you want to use your phone, find here
http://www.sammobile.com/firmwares/
or you can dial a code *#272* "you imei no." # and choose your country code for poland choose XEO and touch install then reboot and be free :good:
I recommend the dial code cause its safer and easier for me
IT WILL FACTORY RESET YOU PHONE SO MAKE A FULL BACK-UP :good:
Click to expand...
Click to collapse
What the code for middle east?

i had a similar problem and contacted samsung in the live chat they assured me all you need to do is a 5min pone call with a si in the original region and then it will be unlocked. in my case the phone was from poland and i need to use it with a brazilian sim. Im testing this rigth this moment.
drum roll
and the results are in:
it worked !!! after a 5:36 call (jsut to be sure) the phone no longer says anything about the sim being locked as it did before.
here is the chat:
Amber
11:55:03
Welcome to Samsung Support. Please allow me a moment to read through your enquiry.
Vinicius Costa
11:55:41
good afternnon i would like to obtain the unlock code for my wifes phone
11:56:46
she just got it as a gift and i tested sim cad for the country where we live (Brazil) but hte phone is locked and it was a gift from her mom i would like to help them as my in law is very nervous about this issue
11:57:09
i told her that i would talk to the samsung support and they would probabilly solve this issue for us
11:57:21
would unlocking the sim void the warranty?
11:57:45
i wouldn´t think so because this is only a software lock
11:57:50
can you guys help me?
We don't unlock phones here
11:58:31
In what way is the phone locked? To network? Or region?
ME
11:58:43
region
11:59:03
she bought it on a shop its not tagged to any network
11:59:21
i can provide scan of the receit or ayhting that may be nescessary
Amber
11:59:26
Okay, it needs to have a five minute call in it's country of origin, otherwise it will not work.
11:59:36
There is no other way to unlock the phone
Me
11:59:36
the phone isnt branded with any network
Amber
11:59:56
Yes, but you would need to make a call in the UK or EU for 5 minutes.
ME
12:00:07
so if she makes a 5 minute phone call in the country of origin the phone will unlock by itself?
Amber
12:00:14
Yes
12:00:26
Needs to be to another number in that country/
ME
12:00:38
im still in urope so all i have to do is make a 5 minute phone call to a european number and pronto?!
12:00:45
voila that is problem solved?
Amber
12:00:46
Yes! That's great
ME
12:01:02
Oh man that is great
12:01:21
samsung already kickign lg´s ass in less than an hour we have the phone
12:01:26
Amber
12:01:41
Haha, it's super lucky you're still in the EU!
12:01:45
Is there anything else I can help you with today?
ME
12:01:57
and then after that 5 minutes phone call we can insert a brazilian sim to test?
12:02:09
yes indeed its lucky
12:02:45
you can help me by confirming that after the 5 miutes call with an eurpoean sim i can swithc for the BR sim and it will be ok
Amber
12:02:55
Yes
ME
12:03:13
great thank you very much
12:03:26
that is all the help i need today
Amber
12:03:39
Thanks for contacting Samsung today, I hope you have a wonderful day! If you could fill out the short survey after chat that would really help me a lot Thanks again!
me
12:03:45
you too amber
12:03:56
i will give you good grades!
12:03:59
Amber
12:04:03
Thanks!!
PS I EDITED MY REAL NAME IN THERE

Cabronbr said:
i had a similar problem and contacted samsung in the live chat they assured me all you need to do is a 5min pone call with a si in the original region and then it will be unlocked. in my case the phone was from poland and i need to use it with a brazilian sim. Im testing this rigth this moment.
drum roll
and the results are in:
it worked !!! after a 5:36 call (jsut to be sure) the phone no longer says anything about the sim being locked as it did before.
here is the chat:
Amber
11:55:03
Welcome to Samsung Support. Please allow me a moment to read through your enquiry.
Vinicius Costa
11:55:41
good afternnon i would like to obtain the unlock code for my wifes phone
11:56:46
she just got it as a gift and i tested sim cad for the country where we live (Brazil) but hte phone is locked and it was a gift from her mom i would like to help them as my in law is very nervous about this issue
11:57:09
i told her that i would talk to the samsung support and they would probabilly solve this issue for us
11:57:21
would unlocking the sim void the warranty?
11:57:45
i wouldn´t think so because this is only a software lock
11:57:50
can you guys help me?
We don't unlock phones here
11:58:31
In what way is the phone locked? To network? Or region?
ME
11:58:43
region
11:59:03
she bought it on a shop its not tagged to any network
11:59:21
i can provide scan of the receit or ayhting that may be nescessary
Amber
11:59:26
Okay, it needs to have a five minute call in it's country of origin, otherwise it will not work.
11:59:36
There is no other way to unlock the phone
Me
11:59:36
the phone isnt branded with any network
Amber
11:59:56
Yes, but you would need to make a call in the UK or EU for 5 minutes.
ME
12:00:07
so if she makes a 5 minute phone call in the country of origin the phone will unlock by itself?
Amber
12:00:14
Yes
12:00:26
Needs to be to another number in that country/
ME
12:00:38
im still in urope so all i have to do is make a 5 minute phone call to a european number and pronto?!
12:00:45
voila that is problem solved?
Amber
12:00:46
Yes! That's great
ME
12:01:02
Oh man that is great
12:01:21
samsung already kickign lg´s ass in less than an hour we have the phone
12:01:26
Amber
12:01:41
Haha, it's super lucky you're still in the EU!
12:01:45
Is there anything else I can help you with today?
ME
12:01:57
and then after that 5 minutes phone call we can insert a brazilian sim to test?
12:02:09
yes indeed its lucky
12:02:45
you can help me by confirming that after the 5 miutes call with an eurpoean sim i can swithc for the BR sim and it will be ok
Amber
12:02:55
Yes
ME
12:03:13
great thank you very much
12:03:26
that is all the help i need today
Amber
12:03:39
Thanks for contacting Samsung today, I hope you have a wonderful day! If you could fill out the short survey after chat that would really help me a lot Thanks again!
me
12:03:45
you too amber
12:03:56
i will give you good grades!
12:03:59
Amber
12:04:03
Thanks!!
PS I EDITED MY REAL NAME IN THERE
Click to expand...
Click to collapse
Whenever my friends use to purchase mobile which was in an offer by network locked in the middle east, they used to call for 5-10 mins in the same country before sending it to their families in another. And I used to think they were STUPID. Fortunately, their network locked mobiles do get unlocked but I couldn't believe them as I didn't understand the logic behind it. After hearing your success story, I kinda believe it but still how will it unlock technically?
---------- Post added at 12:39 PM ---------- Previous post was at 12:38 PM ----------
mirasal2 said:
What the code for middle east?
Click to expand...
Click to collapse
Did you succeed in unlocking your mobile in the middle east?
I'm still stuck

cooldudell said:
Did you succeed in unlocking your mobile in the middle east?
I'm still stuck
Click to expand...
Click to collapse
Not at all ,I just "نسيت الموضوع"

J510f country unlock
dear need J510f Country unlock solution, i have z3x and octopus box please help me if anyone get solution.........

maxxetan said:
sim lock is also known network lock right? but why theres a lot of cases that they successfully unlock their phone using z3x or other samsung tool box?
---------- Post added at 06:27 PM ---------- Previous post was at 06:00 PM ----------
try to flash firmware for specific country you want to use your phone, find here
or you can dial a code *#272* "you imei no." # and choose your country code for poland choose XEO and touch install then reboot and be free :good:
I recommend the dial code cause its safer and easier for me
IT WILL FACTORY RESET YOU PHONE SO MAKE A FULL BACK-UP :good:
Click to expand...
Click to collapse
Hi
I have the same issue. Bought a non working j500fn from ebay. It was not charging and not booting. Managed to fix it. However, now it appears that it is sim locked. It asks for a sim unlock code. I tried flashing different FWs, but with no result. The issue remains. Tried dialing the code you mention "*#272+IMEI*" but again nothing. By the I can not execute any codes. Even *#06# to show the IMEI does not work. I might have broken something, while trying different FWs.
Also I tried using SamsungToolPro but again couldn't get the unlock code. On the videos I watched, people presses a button "Read codes" in the SamsungToolPro and the tool showed them the unlock code. However, there is no such button for my model j500fn. I tried J300 and there is such a button and when I press it starts showing info for my phone j500fn, but when it comes to the retrival ot codes it just stops with an error that it tried to access an invalid memory or something.
Also I can not use an UK SIM, because I am in Bulgaria and don't have any active UK sim cards here with me.
Please help me. This is a rather old model so I am pretty sure there has to be a way to unlock it. Otherwise I will have to trow it away or re sell it for parts. The display is in perfect condition by the way. That way I bought it.

anyone ..... ? can't anyone help? Hereis full of android gurus, i thought this would be an easily one ...

HI
I am proud to anounce that after trying several firmware images i finally managed to unlock the sim of the phone.
The key element is to be able to run the hidden codes, which I wasn't for some reason. For example, *#06# didn't show me anything. When you get that fixed, you have to enter the hidden code *#0808# and select "DM+Modem+ADB” . After that just use the Z3X\Samsung\SamsungToolPRO - press "Unlock" and you are done.