Is this possible? Is there a way to downgrade from 4.1.2 to 4.1.1 without a connection to a PC?
I have a Rogers Note 2 on 4.1.2, and need to get to 4.1.1. The USB connection does not work.
Mobile odin
I'm not rooted. It's a stock phone.
Sent from my SGH-I317M using xda app-developers app
Idk then
bmancell said:
Is this possible? Is there a way to downgrade from 4.1.2 to 4.1.1 without a connection to a PC?
I have a Rogers Note 2 on 4.1.2, and need to get to 4.1.1. The USB connection does not work.
Click to expand...
Click to collapse
It physically doesn't work? Or your computer makes a sound and knows *something* is plugged in, but doesn't know what? If your USB port is physically damaged, it's an easy fix and like $20 for the part:
http://www.youtube.com/watch?v=B3rvuwJ0GpQ
If I plug in the USB connection, it starts charging, it knows its getting power. The phone does not show the normal dialogs when connected to a PC, and the PC does not do anything at all either.
bmancell said:
If I plug in the USB connection, it starts charging, it knows its getting power. The phone does not show the normal dialogs when connected to a PC, and the PC does not do anything at all either.
Click to expand...
Click to collapse
Dial *#7284# while it's unplugged. Make sure both UART and USB are set to PDA. Then hit QUALCOMM SETTINGS and make sure it's set to MTP + ADB. You don't need to reboot.
Sent from my Galaxy Note 2
That didn't work. I think it's hardware, but was hoping to confirm it or not.
bmancell said:
That didn't work. I think it's hardware, but was hoping to confirm it or not.
Click to expand...
Click to collapse
Make sure the Samsung Drivers are installed on your computer as well.
Well like I said. It's a $20, 5 minute fix with no soldering. I literally just bought an otherwise mint T-mobile Note 2 from eBay with the same issue for 395 because the fix takes 5 minutes and is cheap.
Sent from my Galaxy Note 2
Product F(RED) said:
Make sure the Samsung Drivers are installed on your computer as well.
Well like I said. It's a $20, 5 minute fix with no soldering. I literally just bought an otherwise mint T-mobile Note 2 from eBay with the same issue for 395 because the fix takes 5 minutes and is cheap.
Sent from my Galaxy Note 2
Click to expand...
Click to collapse
Yea but that isn't the replacement for a USB connection that doesn't charge, mine charges just no data connection of any kind.
How do I know this will fix it.
bmancell said:
Yea but that isn't the replacement for a USB connection that doesn't charge, mine charges just no data connection of any kind.
How do I know this will fix it.
Click to expand...
Click to collapse
So if it's not physical damage, then it's just software. Reinstall the Samsung USB Drivers. Trust me. The fact that your computer knows something is plugged in means something.
Sent from my Galaxy Note 2
I never once said my computer knows something, it doesn't detect anything. I guess I will try the replacement, no other option I guess.
Thanks.
bmancell said:
I never once said my computer knows something, it doesn't detect anything. I guess I will try the replacement, no other option I guess.
Thanks.
Click to expand...
Click to collapse
? What is your reason for downgrade? Ya wanna unlock it? With the hidden menu? Well if your able to get into recovery, then you should try downgrading your modem if your trying to perform the unlock!! I've read and confirmed that downgrading the modem will give you all the menus you need to perform the UNLOCK!
And next I noticed you did not try your phone with another computer/laptop to see if that one sees your phone!! If not then move on to the replacement part! If you have insurance then do a warranty exchange. Easy as that. But I would try what Fred ^^^^^ said reinstall the Samsung usb drivers.
Just my 2¢®
Sent from my SAMSUNG-SGH-I317 using Xparent SkyBlue Tapatalk 2
Bajanman said:
? What is your reason for downgrade? Ya wanna unlock it? With the hidden menu? Well if your able to get into recovery, then you should try downgrading your modem if your trying to perform the unlock!! I've read and confirmed that downgrading the modem will give you all the menus you need to perform the UNLOCK!
And next I noticed you did not try your phone with another computer/laptop to see if that one sees your phone!! If not then move on to the replacement part! If you have insurance then do a warranty exchange. Easy as that. But I would try what Fred ^^^^^ said reinstall the Samsung usb drivers.
Just my 2¢®
Sent from my SAMSUNG-SGH-I317 using Xparent SkyBlue Tapatalk 2
Click to expand...
Click to collapse
I know how to get to recover, but how do I downgrade my modem?
bmancell said:
I know how to get to recover, but how do I downgrade my modem?
Click to expand...
Click to collapse
First you'll need to locate the original modem for your device I317m. Not sure where to find that, SEARCH is your friend. But I'll start you off start here:
http://forum.xda-developers.com/showthread.php?t=1986480
But you didn't state if your were trying to perform the unlock or just want to downgrade... Just curious is too why you want to is ALL...
Sent from my SAMSUNG-SGH-I317 using Xparent SkyBlue Tapatalk 2
I want it to be unlocked for any carrier. Though the USB issue is a major issue, the other issue I have is WiFi does not work unless I do a setting change after each reboot. Which can be fixed with a downgrade.
The main thing is getting it unlocked.
bmancell said:
I want it to be unlocked for any carrier. Though the USB issue is a major issue, the other issue I have is WiFi does not work unless I do a setting change after each reboot. Which can be fixed with a downgrade.
The main thing is getting it unlocked.
Click to expand...
Click to collapse
Ok then first find the modem you have now, and the original modem. Flash and c if you get all the unlock menus to come up. I'm quite sure you know the code already...
Here check this thread out where I helped someone with there unlock by downgrading modem. Fyi
http://forum.xda-developers.com/showthread.php?p=40405906
Sent from my SAMSUNG-SGH-I317 using Xparent SkyBlue Tapatalk 2
Doesn't' matter. Just realised that I can't flash that with out custom recovery
bmancell said:
Doesn't' matter. Just realised that I can't flash that with out custom recovery
Click to expand...
Click to collapse
That is correct . Taught you had one installed already..
Sent from my SAMSUNG-SGH-I317 using Xparent SkyBlue Tapatalk 2
bmancell said:
Doesn't' matter. Just realised that I can't flash that with out custom recovery
Click to expand...
Click to collapse
Do you have root? You can flash a custom recovery onto your phone, from your phone as long as you have root.
Related
I got this phone from Craigslist yesterday and I've been trying to connect it to computer. The phone is not recognized... it does show that it is charging on the phone. There is no sign of any kind of device found. I'm a advanced user and I have used two different laptops and went to device manager to scan for hardware manually but still no devices show up there... not even as an unknown hardware with a question mark
My computer makes a sound each time I connect any USB drive or any hardware, there is no such sound when I plug in the nexus. I do not know what to do with it to fix it. Any recommendations?
Edit 1: The phone is on stock 4.0.2 with stock recovery installed. User who sold me said it has never been rooted and I can't find any trace of it either.
Edit 2: i have reset it to factory settings and tried it. Also, in developer options I turned on the USB debugging and trued it again. No success.
Mods: Please move it to the Q&A section.
Sent from my Galaxy Nexus using xda premium
did you try a different cable?
Zepius said:
did you try a different cable?
Click to expand...
Click to collapse
I have three different cables. Two from htc and one from gs2.
Sent from my Galaxy Nexus using xda premium
do you know if the phone is on factory images? if the phone is charging on the pc and not even popping up on the machine, sounds like fastcharge is enabled.
Zepius said:
do you know if the phone is on factory images? if the phone is charging on the pc and not even popping up on the machine, sounds like fastcharge is enabled.
Click to expand...
Click to collapse
The phone is on the factory image and has never been rooted. It still has stock recovery on it.
I have formatted it to the factory settings twice. Its on 4.0.2
How do I make sure that it is on fast charge mode? Can we have fast charge on stock rom/recovery? Will that setting persist if I do a factory restore?
Sent from my Galaxy Nexus using xda premium
ceo.mtcl said:
The phone is on the factory image and has never been rooted. It still has stock recovery on it.
I have formatted it to the factory settings twice. Its on 4.0.2
How do I make sure that it is on fast charge mode?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
If your gnex is not rooted, chances are it's not turned on.
When you plug your gnex into your computer, does it says Charging(USB) or Charging(AC)?
If it is AC, then Fast Charge is turned on.
All of my cables that didn't come with the GN do not work in charging or being recognized by my PC.
I have to use the one that came in the box.
Mach3.2 said:
If your gnex is not rooted, chances are it's not turned on.
When you plug your gnex into your computer, does it says Charging(USB) or Charging(AC)?
If it is AC, then Fast Charge is turned on.
Click to expand...
Click to collapse
My computer says nothing. As if nothing is connected to it. Galaxy nexus has a charging icon on top and that's about it. It doesn't say charging USB or AC...
descendency said:
All of my cables that didn't come with the GN do not work in charging or being recognized by my PC.
I have to use the one that came in the box.
Click to expand...
Click to collapse
I've used these cables on my previous nexus without any issues... I'm not sure how to get a new one now ??
Sent from my Galaxy Nexus using xda premium
ceo.mtcl said:
I got this phone from Craigslist yesterday and I've been trying to connect it to computer. The phone is not recognized... it does show that it is charging on the phone. There is no sign of any kind of device found. I'm a advanced user and I have used two different laptops and went to device manager to scan for hardware manually but still no devices show up there... not even as an unknown hardware with a question mark
My computer makes a sound each time I connect any USB drive or any hardware, there is no such sound when I plug in the nexus. I do not know what to do with it to fix it. Any recommendations?
Edit 1: The phone is on stock 4.0.2 with stock recovery installed. User who sold me said it has never been rooted and I can't find any trace of it either.
Edit 2: i have reset it to factory settings and tried it. Also, in developer options I turned on the USB debugging and trued it again. No success.
Mods: Please move it to the Q&A section.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Have you tried to reload the Samsung drivers on the computer in question?
Sent from a phone...
ceo.mtcl said:
My computer says nothing. As if nothing is connected to it. Galaxy nexus has a charging icon on top and that's about it. It doesn't say charging USB or AC...
Click to expand...
Click to collapse
when you're on the lockscreen, which does the phone say?
edfunkycold said:
Have you tried to reload the Samsung drivers on the computer in question?
Sent from a phone...
Click to expand...
Click to collapse
I've tried the galaxy nexus tool kit v7. But should it not recognize it as an unknown hardware at least? It's not even doing that.
Zepius said:
when you're on the lockscreen, which does the phone say?
Click to expand...
Click to collapse
The phone says 'charging, 82%'
Sent from my Galaxy Nexus using xda premium
ceo.mtcl said:
I've tried the galaxy nexus tool kit v7. But should it not recognize it as an unknown hardware at least? It's not even doing that.
The phone says 'charging, 82%'
Click to expand...
Click to collapse
Does it say charging (AC) in Settings -> Battery when connected to the pc?
I a issue exactly like this and had to replace my USB charging board.
Melhouse said:
Does it say charging (AC) in Settings -> Battery when connected to the pc?
I a issue exactly like this and had to replace my USB charging board.
Click to expand...
Click to collapse
Yes verified. It does say charging AC over there.
So is it for sure a hardware issue? How much will it cost to get it fixed?
Sent from my Galaxy Nexus using xda premium
ceo.mtcl said:
I've tried the galaxy nexus tool kit v7. But should it not recognize it as an unknown hardware at least? It's not even doing that.
The phone says 'charging, 82%'
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Not necessarily will it recognize it. Go here download the updated drivers for the Nexus.
http://m.samsung.com/us/support/owners/product/SPH-L700ZKASPR
Install on the computer in question and then try.
Sent from a phone...
ceo.mtcl said:
My computer says nothing. As if nothing is connected to it. Galaxy nexus has a charging icon on top and that's about it. It doesn't say charging USB or AC...
I've used these cables on my previous nexus without any issues... I'm not sure how to get a new one now ??
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Settings > Battery.
Sorry for not telling you this.
Settings/Storage...go into the advanced menu and make sure MTP is checked..
If that doesn't work download a program called USBDEVIEW onto your computer. Make sure to Run as Administrator when you open it. Use it to delete all the drivers that say Samsung, Galaxy or Nexus. Do a clean install of the drivers using the toolkit. If your phone is charging, it SHOULD just be bad drivers or the fact that MTP isn't checked.
lowandbehold said:
Settings/Storage...go into the advanced menu and make sure MTP is checked..
Click to expand...
Click to collapse
Yep verified. That is checked. Toggled to be sure. Rebooted... factory reset. Nothing is fixing it.
If there is a hardware issue can I claim warranty on the GSM version in USA?
Sent from my Galaxy Nexus using xda premium
ceo.mtcl said:
Yep verified. That is checked. Toggled to be sure. Rebooted... factory reset. Nothing is fixing it.
If there is a hardware issue can I claim warranty on the GSM version in USA?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
See my above post again...I had to edit it.
I'm telling you its the drivers on That one computer. This ^ person right here (lowandbehold) is telling you the same thing. Wipe the computer clean of any thing that says samsung and reload the drivers.
Sent from a phone...
If it says AC charging it sounds like someone had it rooted and turned on USB fast charge then never turned it off. There was a thread about a week ago where someone's USB connection was screwed up due to that mod.
Sent from my Galaxy Nexus using xda premium
I flashed a wrong Rom on my T-Mobile S3. Now I can not get it into download mode. It none responsive I cannot get it to power on. I try pull out the battery put in back in. Didn't work either. Any one have any idea how I get my s3 power up into download mode??
Thanks
Sent from my SGH-T999 using xda premium
Try a USB dongle.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
International rom?
Bizdady said:
International rom?
Click to expand...
Click to collapse
Yes, It was my nephew's s3. He was blindly flashed it, now He asked me to help him, and I am asking any one in here know how to get it power up and into download mode.
I think that flashing the wrong radio version could fry the whole thing dead permanently.
However, if you can get ADB to recognize the device you may be able to get it working. See if you can get adb to recognize the device at all, if you can there may be hope.
lgkahn said:
Try a USB dongle.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
and how do you fix it with that?
Sorry many that have flashed international have been hard bricked if they can't return on. Mskip has a toolkit but if it won't turn on then it's hard to flash though.
Sent from my Samsung Galaxy SIII using Tapatalk
Does any screen come up? If it's hard bricked, just bring it to the store, and show them. They'll probably try a new battery, and if they can't boot it up, then they may replace it.
Worst case, they say they won't replace it cause you messed with it, and you're back where you started.
NedDasty said:
Does any screen come up? If it's hard bricked, just bring it to the store, and show them. They'll probably try a new battery, and if they can't boot it up, then they may replace it.
Worst case, they say they won't replace it cause you messed with it, and you're back where you started.
Click to expand...
Click to collapse
No ..nothing come up. screen is blank
jordan032503 said:
and how do you fix it with that?
Click to expand...
Click to collapse
Cause the USB dongle will put you straight to download mode. From there you can flash the proper ROM.
Anyway, if you can't get in to download mode, can't boot up to anything, and especially if ADB can't find your phone, then you might have just gotten yourself a very expensive paperweight.
Sent from my SGH-I747M using xda app-developers app
jordan032503 said:
I flashed a wrong Rom on my T-Mobile S3. Now I can not get it into download mode. It none responsive I cannot get it to power on. I try pull out the battery put in back in. Didn't work either. Any one have any idea how I get my s3 power up into download mode??
Thanks
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
The same thing happened to me a year ago, I flashed the wrong Kernel to my T-Mobile Galaxy 4G, you need a (JTAG Service). Go to this website and contact the guy he will help you get it working again, good luck.
http://mobiletechvideos.mybigcommerce.com/
youre brickd
The jig won't work for u. I bet if you plug it in the computer it sees it as QHSUSB DLOAD. sound right? Sounds like u need JTAG or to return it. You just woke up and it didn't turn on right? Lmao
jordan032503 said:
I flashed a wrong Rom on my T-Mobile S3. Now I can not get it into download mode. It none responsive I cannot get it to power on. I try pull out the battery put in back in. Didn't work either. Any one have any idea how I get my s3 power up into download mode??
Thanks
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I did the same thing, quit wasting time, you need a Jtag service period, if you can't get into download mode, Odin and Adb IS NOT going to work. It will not see the device. Go into device manager, if you see this QHSUSB DLOAD, you are seriously bricked, only Jtag can help it. The usbjig will NOT work with this issue, I have tried.
---------- Post added at 07:32 AM ---------- Previous post was at 07:25 AM ----------
billard412 said:
The jig won't work for u. I bet if you plug it in the computer it sees it as QHSUSB DLOAD. sound right? Sounds like u need JTAG or to return it. You just woke up and it didn't turn on right? Lmao
Click to expand...
Click to collapse
This is the correct answer, Jtag or return are the only options.
jordan032503 said:
I flashed a wrong Rom on my T-Mobile S3. Now I can not get it into download mode. It none responsive I cannot get it to power on. I try pull out the battery put in back in. Didn't work either. Any one have any idea how I get my s3 power up into download mode??
Thanks
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-iii-jtag-brick-repair/
Sent from my SGH-T999 using xda premium
deeznutz1977 said:
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-iii-jtag-brick-repair/
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
This is exactly where I sent my phone repair, quick and informative.
just and fyi, I fried my old g2 with the wrong Rom within the first week I had it. but insurance covers your phone when it gets destroyed in a car accident.
Sent from my SGH-T999 using xda app-developers app
oscarwylde said:
just and fyi, I fried my old g2 with the wrong Rom within the first week I had it. but insurance covers your phone when it gets destroyed in a car accident.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Lol.
oscarwylde said:
just and fyi, I fried my old g2 with the wrong Rom within the first week I had it. but insurance covers your phone when it gets destroyed in a car accident.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
lol, not in Texas they won't.
BRICK
My T999 is the same the computer is not recognized with error message QHSUSB DLOAD. but i dont know why after i install SAMSUNG ADB INTERFACE then the computer start see it in Device Manager and name my device as SAMSUNG ADROID PHONE . but ODIN not reconized , can't get into download mode, Odin and Adb IS NOT going to work , the usbjig is NOT work . The USB on PC make sound when i plug in but the phone still not on . I think i get hard brick and may have to send it to TEXAS . any help , please
I bricked mine last week. I then lost it too...insurance sent me a new one.
I bought a new USB cable that was supposed to work for data/sync and charging for my phone. It worked fine as a charging cable, but my PC did not detect my phone's USB connection so I can't access my sdcard or get into Fastboot or Flashmode. When trying to get into Fastboot, I see a very brief blue blip, but that's all. Flashmode doesn't turn green at all.
I have tried this now on 2 different PCs with several different cables that have worked OK previously and have not had any updates done to them. On a third PC, I'm able to connect to the USB port and access the sdcard, but Fastboot and Flashmode still are not detected. I thought I had read something about this problem before, but I've not found any answers. Is this something that Alejandrissimo might be able to fix, or is it strictly a hardware issue and insurance time? I am able to return the phone to a stock, unrooted state if need be.
I would return it to stock state and see if that fixes it. I remember reading about a similar issue once. I too will try to find it and see if there was a solution.
Sent from my R800x using xda premium
jgregoryj1 said:
I would return it to stock state and see if that fixes it. I remember reading about a similar issue once. I too will try to find it and see if there was a solution.
Sent from my R800x using xda premium
Click to expand...
Click to collapse
Nope - It was actually a failing/failed USB port. I took it to Best Buy and sent it off for repair/replacement and have a loaner phone to use until it comes back in later this week.
Ouch. That sucks. Sorry man. Hopefully you get it fixed and not a replacement. Suck to to have to reunlock the bootloader again. Just cuz I am curious what phone did they give you? Hope to jeebus its not and iPhone....haha. kidding
Sent from my R800x using xda premium
jgregoryj1 said:
Ouch. That sucks. Sorry man. Hopefully you get it fixed and not a replacement. Suck to to have to reunlock the bootloader again. Just cuz I am curious what phone did they give you? Hope to jeebus its not and iPhone....haha. kidding
Sent from my R800x using xda premium
Click to expand...
Click to collapse
Nope, it is a loaner Play.
And, yeah, I'll have to pay to get the bootloader unlocked again, but that's life.
All,
I am a 3rd party and was given a phone to try and fix. I've tried OMAPflash & SDK without any luck. I was told the person did an OTA and something about a bootloader and could have potentially dropped the phone. I was told they stated the phone wouldn't charge and then died and didn't turn back on; we've tried another battery with no luck. The phone does not power on or respond to any button combinations, but when plugged into a computer; it fails to recognize the device...even with drivers installed; so the computer can see it, it just won't load the drivers. I don't want to spend tons of money fixing a phone that isn't mine but does anyone know if a USB Jig works on a phone that's hard bricked to the point where it has no power? No fastboot or adb, neither read the phone. tried multiple computers.
My last resort is this USB Jig. Also, no warranty from sammy. I feel like i've tried everything.
Thank You in advance.
I used a jig to recover a friend's S3 after he flashed an international S3 ROM and it wouldn't boot or do anything so I suppose it could work.
Your last resort *is* the jig.
Go for it, do you know how to get one?
Sent from my Galaxy Nexus using xda app-developers app
jimmyco2008 said:
Your last resort *is* the jig.
Go for it, do you know how to get one?
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
My lastttt resort is paying $50 for someone to JTAG it. I know where to find one. Will report back.
Edit: jig ordered. Should be here in two days.
Edit: 1/12: got the jig, no dice; but it works on my GSIII. Going to send the phone in to get fixed.
Thank you all
Sent from my SPH-L710 using xda premium
Question about using jig on GS3
hELLO,a simple question: what state was your GS3 in when you used the jig...? I am not concerned about the other phone just the GS3... Was your GS3 turning on at all??
Sooppex said:
My lastttt resort is paying $50 for someone to JTAG it. I know where to find one. Will report back.
Edit: jig ordered. Should be here in two days.
Edit: 1/12: got the jig, no dice; but it works on my GSIII. Going to send the phone in to get fixed.
Thank you all
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
Sooppex said:
it fails to recognize the device...even with drivers installed; so the computer can see it, it just won't load the drivers
Click to expand...
Click to collapse
Did you do this [OMAPflash] without battery? Also note that it's normal for the computer to beep repeatedly (usb connected usb disconnected...) until you start the flashing program.
Did you see OMAP in the device manager at all?
You guys realize you are posting on a thread 6 months old, right?
Sent from my Galaxy Nexus using Tapatalk 2
I just used this ROM:
http://slimroms.net/index.php/downl...-i9300/2843-slim-i9300-4-2-2-build-6-official
And I think I needed this one:
http://slimroms.net/index.php/downl...-d2spr/2832-slim-d2spr-4-2-2-build-6-official
Now my phone won't even turn on at all. How do I fix this?
NOTE: When I plug it into my PC w/o a battery i get a QHSUSB_DLOAD driver that pops up but idk what to do with it.
There are plenty of threads if you had done some searching.
http://forum.xda-developers.com/showthread.php?t=2283908
There's one of the many.
Another one bites the dust.
It is bricked.
Next time just stay in the SPRINT s3 forums please.
------------------------
Sprint Galaxy S3 "Supernexus"
Whiplashh Rom
Look it up.
Lesson learned.
VikingoRMCF said:
Lesson learned.
Click to expand...
Click to collapse
By the looks of it... I doubt it.
If you can't/don't read, nothing will fix your stupidity lol.
w4rl0 said:
NOTE: When I plug it into my PC w/o a battery i get a QHSUSB_DLOAD driver that pops up but idk what to do with it.
Click to expand...
Click to collapse
Yes you essentially tried turning your device into an International GSM SGS3. It won't work. It is hard bricked. You can search on here there are several places offering JTAG service and they can repair it something between 50 to 75 dollars. You have to send the phone to them.
Please read and if it doesn't say Sprint D2spr or SPH-L710 do not use it.
Sent from the future via Xparent Green Tapatalk 2
edfunkycold said:
Yes you essentially tried turning your device into an International GSM SGS3. It won't work. It is hard bricked. You can search on here there are several places offering JTAG service and they can repair it something between 50 to 75 dollars. You have to send the phone to them.
Please read and if it doesn't say Sprint D2spr or SPH-L710 do not use it.
Sent from the future via Xparent Green Tapatalk 2
Click to expand...
Click to collapse
Will a JIG work?
w4rl0 said:
Will a JIG work?
Click to expand...
Click to collapse
Nope sorry
Sent from the future via Xparent Green Tapatalk 2
edfunkycold said:
Nope sorry
Sent from the future via Xparent Green Tapatalk 2
Click to expand...
Click to collapse
Why would it not work?
because you didnt just flash to the the partitions in a wrong way... you created different incompatible partitions that your phone cant use... when a jtag happens, they open up your phone and plug the whole board into their pc and manually repartition the memory... even the usb port cant do that youd have to have direct access to the memory units...
eisawi99 said:
because you didnt just flash to the the partitions in a wrong way... you created different incompatible partitions that your phone cant use... when a jtag happens, they open up your phone and plug the whole board into their pc and manually repartition the memory... even the usb port cant do that youd have to have direct access to the memory units...
Click to expand...
Click to collapse
Hmmmm Got any sites you can point me to
w4rl0 said:
Hmmmm Got any sites you can point me to
Click to expand...
Click to collapse
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-iii-jtag-brick-repair/
and heres a video on how its done