Related
I flashed a wrong Rom on my T-Mobile S3. Now I can not get it into download mode. It none responsive I cannot get it to power on. I try pull out the battery put in back in. Didn't work either. Any one have any idea how I get my s3 power up into download mode??
Thanks
Sent from my SGH-T999 using xda premium
Try a USB dongle.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
International rom?
Bizdady said:
International rom?
Click to expand...
Click to collapse
Yes, It was my nephew's s3. He was blindly flashed it, now He asked me to help him, and I am asking any one in here know how to get it power up and into download mode.
I think that flashing the wrong radio version could fry the whole thing dead permanently.
However, if you can get ADB to recognize the device you may be able to get it working. See if you can get adb to recognize the device at all, if you can there may be hope.
lgkahn said:
Try a USB dongle.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
and how do you fix it with that?
Sorry many that have flashed international have been hard bricked if they can't return on. Mskip has a toolkit but if it won't turn on then it's hard to flash though.
Sent from my Samsung Galaxy SIII using Tapatalk
Does any screen come up? If it's hard bricked, just bring it to the store, and show them. They'll probably try a new battery, and if they can't boot it up, then they may replace it.
Worst case, they say they won't replace it cause you messed with it, and you're back where you started.
NedDasty said:
Does any screen come up? If it's hard bricked, just bring it to the store, and show them. They'll probably try a new battery, and if they can't boot it up, then they may replace it.
Worst case, they say they won't replace it cause you messed with it, and you're back where you started.
Click to expand...
Click to collapse
No ..nothing come up. screen is blank
jordan032503 said:
and how do you fix it with that?
Click to expand...
Click to collapse
Cause the USB dongle will put you straight to download mode. From there you can flash the proper ROM.
Anyway, if you can't get in to download mode, can't boot up to anything, and especially if ADB can't find your phone, then you might have just gotten yourself a very expensive paperweight.
Sent from my SGH-I747M using xda app-developers app
jordan032503 said:
I flashed a wrong Rom on my T-Mobile S3. Now I can not get it into download mode. It none responsive I cannot get it to power on. I try pull out the battery put in back in. Didn't work either. Any one have any idea how I get my s3 power up into download mode??
Thanks
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
The same thing happened to me a year ago, I flashed the wrong Kernel to my T-Mobile Galaxy 4G, you need a (JTAG Service). Go to this website and contact the guy he will help you get it working again, good luck.
http://mobiletechvideos.mybigcommerce.com/
youre brickd
The jig won't work for u. I bet if you plug it in the computer it sees it as QHSUSB DLOAD. sound right? Sounds like u need JTAG or to return it. You just woke up and it didn't turn on right? Lmao
jordan032503 said:
I flashed a wrong Rom on my T-Mobile S3. Now I can not get it into download mode. It none responsive I cannot get it to power on. I try pull out the battery put in back in. Didn't work either. Any one have any idea how I get my s3 power up into download mode??
Thanks
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I did the same thing, quit wasting time, you need a Jtag service period, if you can't get into download mode, Odin and Adb IS NOT going to work. It will not see the device. Go into device manager, if you see this QHSUSB DLOAD, you are seriously bricked, only Jtag can help it. The usbjig will NOT work with this issue, I have tried.
---------- Post added at 07:32 AM ---------- Previous post was at 07:25 AM ----------
billard412 said:
The jig won't work for u. I bet if you plug it in the computer it sees it as QHSUSB DLOAD. sound right? Sounds like u need JTAG or to return it. You just woke up and it didn't turn on right? Lmao
Click to expand...
Click to collapse
This is the correct answer, Jtag or return are the only options.
jordan032503 said:
I flashed a wrong Rom on my T-Mobile S3. Now I can not get it into download mode. It none responsive I cannot get it to power on. I try pull out the battery put in back in. Didn't work either. Any one have any idea how I get my s3 power up into download mode??
Thanks
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-iii-jtag-brick-repair/
Sent from my SGH-T999 using xda premium
deeznutz1977 said:
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-iii-jtag-brick-repair/
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
This is exactly where I sent my phone repair, quick and informative.
just and fyi, I fried my old g2 with the wrong Rom within the first week I had it. but insurance covers your phone when it gets destroyed in a car accident.
Sent from my SGH-T999 using xda app-developers app
oscarwylde said:
just and fyi, I fried my old g2 with the wrong Rom within the first week I had it. but insurance covers your phone when it gets destroyed in a car accident.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Lol.
oscarwylde said:
just and fyi, I fried my old g2 with the wrong Rom within the first week I had it. but insurance covers your phone when it gets destroyed in a car accident.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
lol, not in Texas they won't.
BRICK
My T999 is the same the computer is not recognized with error message QHSUSB DLOAD. but i dont know why after i install SAMSUNG ADB INTERFACE then the computer start see it in Device Manager and name my device as SAMSUNG ADROID PHONE . but ODIN not reconized , can't get into download mode, Odin and Adb IS NOT going to work , the usbjig is NOT work . The USB on PC make sound when i plug in but the phone still not on . I think i get hard brick and may have to send it to TEXAS . any help , please
I bricked mine last week. I then lost it too...insurance sent me a new one.
I bought a new USB cable that was supposed to work for data/sync and charging for my phone. It worked fine as a charging cable, but my PC did not detect my phone's USB connection so I can't access my sdcard or get into Fastboot or Flashmode. When trying to get into Fastboot, I see a very brief blue blip, but that's all. Flashmode doesn't turn green at all.
I have tried this now on 2 different PCs with several different cables that have worked OK previously and have not had any updates done to them. On a third PC, I'm able to connect to the USB port and access the sdcard, but Fastboot and Flashmode still are not detected. I thought I had read something about this problem before, but I've not found any answers. Is this something that Alejandrissimo might be able to fix, or is it strictly a hardware issue and insurance time? I am able to return the phone to a stock, unrooted state if need be.
I would return it to stock state and see if that fixes it. I remember reading about a similar issue once. I too will try to find it and see if there was a solution.
Sent from my R800x using xda premium
jgregoryj1 said:
I would return it to stock state and see if that fixes it. I remember reading about a similar issue once. I too will try to find it and see if there was a solution.
Sent from my R800x using xda premium
Click to expand...
Click to collapse
Nope - It was actually a failing/failed USB port. I took it to Best Buy and sent it off for repair/replacement and have a loaner phone to use until it comes back in later this week.
Ouch. That sucks. Sorry man. Hopefully you get it fixed and not a replacement. Suck to to have to reunlock the bootloader again. Just cuz I am curious what phone did they give you? Hope to jeebus its not and iPhone....haha. kidding
Sent from my R800x using xda premium
jgregoryj1 said:
Ouch. That sucks. Sorry man. Hopefully you get it fixed and not a replacement. Suck to to have to reunlock the bootloader again. Just cuz I am curious what phone did they give you? Hope to jeebus its not and iPhone....haha. kidding
Sent from my R800x using xda premium
Click to expand...
Click to collapse
Nope, it is a loaner Play.
And, yeah, I'll have to pay to get the bootloader unlocked again, but that's life.
How do u know if your still safe to try usb Jig to force dload mode with knowing what functions are still showing signs of life ? Like if manual mode.doesnt do it , and u have a red light when charging with no battery.And or can still here connect and disconnect sounds on a Pc.This is a new Question related to possible soft brick only cause im waiting for a real tech savy member to.. hear me out...maybe help in detail.If you get sounds from phone to pc when plug in and can feel the phone quietly.vibe on and off during.button combo ...but all the time with a black screen
Sent from my LG-MS770 using xda app-developers
lojak29 said:
How do u know if your still safe to try usb Jig to force dload mode with knowing what functions are still showing signs of life ? Like if manual mode.doesnt do it , and u have a red light when charging with no battery.And or can still here connect and disconnect sounds on a Pc.This is a new Question related to possible soft brick only cause im waiting for a real tech savy member to.. hear me out...maybe help in detail.If you get sounds from phone to pc when plug in and can feel the phone quietly.vibe on and off during.button combo ...but all the time with a black screen
Sent from my LG-MS770 using xda app-developers
Click to expand...
Click to collapse
What did you do to brick your phone?
Sent from my Nexus 4 using xda premium
http://forum.xda-developers.com/showthread.php?p=39663897#post39663897
http://forum.xda-developers.com/showthread.php?p=39645631#post39645631
Well Im desperately trying to find anyway to avoid jtag expenses, i took.it to a sprint tech i know who deals with this stuff after i had exhausted my options .He said jtag it . Earlier today i made a 300kohm 1/2 watt jig but to no luck it wouldnt force dload mode?
Ive been reading on this other explored method of sd card unbricking using a jig and tweezers to trip a resistor on the board and manually flash a new bootloader it seems..very very very complicated
And noone has succesfully done this as far as i know.
All i did was accidentally flash my old gsm note 2 t889 backup ,jedi master10 rom, when i meant to flash jedi invasion I overlooked the words master for invasion after it flashed it said
Install failed in RED and No OS installed at top then i realized what i did and tried to Save my a** and restore my nandroid that failed also ,then i tried to dig myself out this mess and flash the only other t999 zip rom i had on my sd and that failed Said no OS Installed on top after i rebooted never could reboot again Not even 3button.works for dload mode
Sent from my LG-MS770 using xda app-developers app
Its been 24hrs bud !!!By the way ,the great moderator Mr kenny glass explains on the xda rules that seem to be so strict, anyone can legally reitterate on a previous post,so the links to my old post mean nothing
Sent from my LG-MS770 using xda app-developers app
He wanted to know what you did, I linked him to threads that explain what you did. I have no further interest in helping you, because of your attitude. As others seem to have chosen.
Dude you flashed a Rom for a different phone. You're boned! Jtag it.
Sent from my SGH-T999 using Tapatalk 2
bfranklin1986 said:
Dude you flashed a Rom for a different phone. You're boned! Jtag it.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Yeah, exactly. I remember thus thread from yesterday and the answer is still the same.
Sent from my SGH-T999 using Tapatalk 2
Pennycake said:
Yeah, exactly. I remember thus thread from yesterday and the answer is still the same.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
I know on the s2 you can force download mode by using a g2x charger and usb! But only an usb and charger made by lg for the g2x! Its does work I tried it not sure if it will on a s3 though
Sent from my Nexus 4 using xda premium
Thats interesting who takes credit for this bizarre workaround?
Is it something on that specific circuit board in the usb that triggers this
Sent from my LG-MS770 using xda app-developers app
lojak29 said:
Thats interesting who takes credit for this bizarre workaround?
Is it something on that specific circuit board in the usb that triggers this
Sent from my LG-MS770 using xda app-developers app
Click to expand...
Click to collapse
i think its a way that samsung built in specifically for them to refurbish phones in the bricked condition. other than that i have no idea lol
lojak29 said:
Thats interesting who takes credit for this bizarre workaround?
Is it something on that specific circuit board in the usb that triggers this
Sent from my LG-MS770 using xda app-developers app
Click to expand...
Click to collapse
Yes its built into the usb and charger I dunno why but it does work for the s2 never tried the s3
Sent from my Nexus 4 using xda premium
ziggy46 said:
i think its a way that samsung built in specifically for them to refurbish phones in the bricked condition. other than that i have no idea lol
Click to expand...
Click to collapse
I believe you are correct. I am still a noob at this tho.. But from what I see from an engineering stand-point, you nailed it.
re: hard or soft brick
lojak29 said:
How do u know if your still safe to try usb Jig to force dload mode with knowing what functions are still showing signs of life ? Like if manual mode.doesnt do it , and u have a red light when charging with no battery.And or can still here connect and disconnect sounds on a Pc.This is a new Question related to possible soft brick only cause im waiting for a real tech savy member to.. hear me out...maybe help in detail.If you get sounds from phone to pc when plug in and can feel the phone quietly.vibe on and off during.button combo ...but all the time with a black screen
Sent from my LG-MS770 using xda app-developers
Click to expand...
Click to collapse
I don't know all the specifics in your case, but I can tell you this about a hard or a soft bricked phone.
Plugging a Jig into any android phone is safe and will not harm it at all regardless of it's condition.
If the phone is hard bricked it will not go into download mode even with a Jig.
It makes no difference what the issue or problem is with the phone, simply
plugging a Jig into it will either get you into download mode or it won't.
The way you can tell if the phone is hard bricked is if the phone's screen and or
led's do not light up at all even with a known charged battery and regardless
of which button or combination of buttons are depressed.
If the phone vibrates it usually means that it's not hard bricked.
Hard bricked phones are DEAD they show no signs of life at all
that's why they are called BRICKS.
One of the nice things about the jig is that it can work even if the computer
does not recognize the phone when it's normally plugged into the usb port.
So if your phone is NOT hard bricked my suggestion would be to plug in the
Jig get it into download mode and have Odin ready with the stock or stock
rooted Tmobile Jellybean v4.1.1 firmware ready to flash using the TAR file.
Good Luck!
Hey everyone. Thanks in advance. I have searched the forums, the web. Ended up here. I rooted my phone, added carbon rom. With goo download I think it was called. "Goo" something. Now my phone is dead. Will not boot to download mode. Will not turn on at all. The only time I can get anything response from the phone is when I pull the battery plug it in and hold the three buttons. The light stays red, but that is all. No activity from the screen. I have read the phone is "hard bricked" and that I basically need to buy a new phone. I hope that is not the case. Any help is much appreciated. Sorry if this is a repeat post, but after hours of research and no specific answers I felt this what the only way.
Thanks again!
My two suggestions...
1. Hold up (or was it down?) volume, home and power all at the same time. Until you get a reaction. Then figure it out from there
2. Your phone is done for.. Find out where the closest att service center is and say your phone screwed up during an update of theirs. Or just say your phone stopped working and hope for the best
A main question is, does your computer recognize your phone at all?
Sent from my SGH-I747 using xda app-developers app
axel4401 said:
My two suggestions...
1. Hold up (or was it down?) volume, home and power all at the same time. Until you get a reaction. Then figure it out from there
2. Your phone is done for.. Find out where the closest att service center is and say your phone screwed up during an update of theirs. Or just say your phone stopped working and hope for the best
A main question is, does your computer recognize your phone at all?
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Thank you for the response. I tired 1 a hundred times and no luck. 2 is my next step tomorrow. BUT the weird thing, is if i pull the battery and plug it in the red charge light shows red. Also, having a PC the computer does the beep as if you plugged in something via USB. This i just recently discovered. Although i really dont think it matters. I also tried making a jig, no luck either. Most likely fail on my end with that.
At this point in time I think the best bet will be the ATT store. Unless someone has another solution, that is the only way I see it being fixed. Gotta read the details when you mess around with this stuff. Now I am paying the price.
Does Odin recognize it when you plug it in to the computer? Keep in mind you need the right drivers for it to recognize a working phone... And this is a longshot to day the least
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
this thread is open in like 2 other forums, including the i9300. this device was probably flashed with an incorrect models firmware and is hard bricked.
TeknoGodz said:
Does Odin recognize it when you plug it in to the computer? Keep in mind you need the right drivers for it to recognize a working phone... And this is a longshot to day the least
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
No its does not. Oden did detect the phone prior to this.
xBeerdroiDx said:
this thread is open in like 2 other forums, including the i9300. this device was probably flashed with an incorrect models firmware and is hard bricked.
Click to expand...
Click to collapse
One other forum the 19300 yes. Got flamed good too. Seems like a hand full of people like to chastise more than help. Couldnt figure out how to delete the original thread. In all my frustration as is, I played the F it card. You are right about 2 things though. It was flashed with wrong software, and yes it is hard bricked.
xBeerdroiDx said:
this thread is open in like 2 other forums, including the i9300. this device was probably flashed with an incorrect models firmware and is hard bricked.
Click to expand...
Click to collapse
if this is the case
jtag or pay 356 $ to sammy
Sent from my SAMSUNG-SGH-I747 using xda premium
niceppl said:
if this is the case
jtag or pay 356 $ to sammy
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Thats what I am thinking too. Lesson learned.
Thanks
Well went to att. They gave me a new phone. They couldnt turn it on either. Guess when it comes to this just act stupid and see what they will do for you.
Good job. I did the same thing with my captivate a while back!
Always remember to check compatibility. If unsure, keep reading the thread or ask.
Sent from my SGH-I747 using xda app-developers app
mjmiam said:
Seems like a hand full of people like to chastise more than help.
Click to expand...
Click to collapse
Welcome to XDA.
mjmiam said:
Well went to att. They gave me a new phone. They couldnt turn it on either. Guess when it comes to this just act stupid and see what they will do for you.
Click to expand...
Click to collapse
Till you see a charge on your bill, showing a modified phone. Soon as the techs report that it has been rooted and so on. Happen to one of my friends. You may see a surprise on your bill....beware
TheAxman said:
Till you see a charge on your bill, showing a modified phone. Soon as the techs report that it has been rooted and so on. Happen to one of my friends. You may see a surprise on your bill....beware
Click to expand...
Click to collapse
It's unlikely but it can happen.
Sent from my SGH-I747 using xda app-developers app
So long story short, I broke my Samsung Galaxy SIII T999 about a month ago and sent it in to be replaced through my insurance. I thought they had sent me another T999 but instead, they sent me the newer T999L model. I was unaware of this until I managed to hardbrick my new phone by trying to install a firmware for the T999 Model. Lesson learned, 'nuff said.
Now, to my REAL problem.... I've managed to contact a local guy who repairs hardbricked phones via Riff Box/Jtagging. But because this phone is such a new model, there isn't currently an "official" resurrection file out for the T999L. I got in contact with a guy on ebay who repairs phones and he stated that he had created his own resurrection file for the particular model. Buuuuuut he didn't want to share or sell it
Does anyone have access to a T999L resurrection file? I'm a little skeptical of sending my phone to be repaired, just because I've heard stories of phones not being returned and etc. Would my only other option be to perhaps swap out the motherboard on the phone?
Unfortunately, there isn't one. Motodefier and I have been working on creating one, but its not quite ready yet. Almost, but not quite. Ill try to get back to looking at it tonight.
For actual, official firmware, youd have to wait for an update from sammy &T-Mobile.
Our thread is in the development section if you want to take a look.
Sent from my SGH-T999L using xda premium
Ahhhh, thats what I figured. Well thanks for the clarification I really appreciate it. Good luck on finishing that resurrection file :good:
If you do end up sending it in for repair, check out mobiletechvideos.com
I'd steer clear of the guy who supposedly has it, but won't share it. Sounds shady to me. (He may just be waiting for us to finish it!)
As for mobiletechvideos.com, lots of people have given positive reviews in this forum and I've never seen a negative one.
I've seen one other mentioned here that was just as good but cheaper, but can't remember more than that. Maybe someone else remembers.
Sorry I haven't got ours working btw. Ill be able to get back on it again tonight. I'm not the only one working on it though. So keep an eye on our thread.
Sent from my SGH-T999L using xda premium
Can you get into the recovery menu? And do you have usb debugging enabled? If so we should be able to reverse the dumps we took of the partitions to get you back up, but I would only want to use this as a last resort, as we are very close to having this odin flashable finished.
Sent from my SGH-T999L using xda app-developers app
That always sucks man
Sent from my LG-LS970 using xda app-developers app
MotoDefier said:
Can you get into the recovery menu? And do you have usb debugging enabled? If so we should be able to reverse the dumps we took of the partitions to get you back up, but I would only want to use this as a last resort, as we are very close to having this odin flashable finished.
Sent from my SGH-T999L using xda app-developers app
Click to expand...
Click to collapse
Nah dude I'm not able to boot into recovery OR download mode. Completely hard bricked
Dang. That sucks
Sent from my LG-LS970 using xda app-developers app
Tasty_Beats said:
Nah dude I'm not able to boot into recovery OR download mode. Completely hard bricked
Click to expand...
Click to collapse
Its going to be hard to create an unbrickable mod, which I think is probably what you will need, qualcomm simplified thier pinout configuration for the MSM8960 board to keep us from getting into thier pbl but I know it can be done, we will just have to work on it, I will see what we might be able to come up with software wise for a oneclick unbrick for the T999L. Might be hard without having a bricked device to test it on, I will see if I can find one for sale on ebay or something. Its just a matter of time before it happens regaurdless of who gets it done. No promises but we will work on it. You might check this thread and see if you can get some support to adapt it to the T999L http://forum.xda-developers.com/showthread.php?t=2023069
Sent from my SGH-T999L using xda app-developers app
Well hey man, as stated before, thank you guys for your work. I really appreciate it. I do have one last question though.... I technically would be able to swap out the mainboard with another T999L board right? I could also even switch it with a T999 mainboard correct?
Tasty_Beats said:
Well hey man, as stated before, thank you guys for your work. I really appreciate it. I do have one last question though.... I technically would be able to swap out the mainboard with another T999L board right? I could also even switch it with a T999 mainboard correct?
Click to expand...
Click to collapse
Yes you could swap the T999L main board, but the T999 mainboard is different, it may work but I doubt it, your ribbon cables probably won't match up.
Sent from my SGH-T999L using xda app-developers app
So as I'm following this op, basically this device is so touchy and so new that a jtag doesnt even exist even with mobiltech vid?
Do we even have a stock firmware t999l tar file for Odin? For the sake of saving it through dload mode?
I'm gonna stay stock until theres some heavy dev work done, don't need a :banghead: hard brick...
Sent from my SGH-T999L using xda app-developers app
lojak29 said:
So as I'm following this op, basically this device is so touchy and so new that a jtag doesnt even exist even with mobiltech vid?
Do we even have a stock firmware t999l tar file for Odin? For the sake of saving it through dload mode?
I'm gonna stay stock until theres some heavy dev work done, don't need a :banghead: hard brick...
Sent from my SGH-T999L using xda app-developers app
Click to expand...
Click to collapse
We are currently working on it, I think we're getting close, but not quite there yet. I believe DocHoliday77 has finished the md5's you can use in cwm or twrp but you should double check with him, as we are going through so much info, its a little hard to keep up with everything.
Sent from my SGH-T999L using xda app-developers app
MotoDefier said:
We are currently working on it, I think we're getting close, but not quite there yet. I believe DocHoliday77 has finished the md5's you can use in cwm or twrp but you should double check with him, as we are going through so much info, its a little hard to keep up with everything.
Sent from my SGH-T999L using xda app-developers app
Click to expand...
Click to collapse
Is there any solution for this? I think I got in exact same situation, got a replacement phone and figured out they sent me SGH-T999L version only after I flashed
alex_mib said:
Is there any solution for this? I think I got in exact same situation, got a replacement phone and figured out they sent me SGH-T999L version only after I flashed
Click to expand...
Click to collapse
If you can get it into download mode, this is the full stock untouched odin flashable package http://sourceforge.net/projects/d2ltetmo/files/latest/download
Sent from my SGH-T999L using xda app-developers app
MotoDefier said:
If you can get it into download mode, this is the full stock untouched odin flashable package http://sourceforge.net/projects/d2ltetmo/files/latest/download
Sent from my SGH-T999L using xda app-developers app
Click to expand...
Click to collapse
No, the thing is that is doesnt react to anything, looks like hard bricked... Any way to fix this?
alex_mib said:
No, the thing is that is doesnt react to anything, looks like hard bricked... Any way to fix this?
Click to expand...
Click to collapse
Your only hope outside of a warranty claim or jtag service would be to buy a jig on ebay, and see if that will do it, I had my samsung vibrant do the same back in the day, and the jig saved me, its worth a shot they are usually only 2-5 bucks, beats buying a new phone.
Sent from my SGH-T999L using xda app-developers app
MotoDefier said:
Your only hope outside of a warranty claim or jtag service would be to buy a jig on ebay, and see if that will do it, I had my samsung vibrant do the same back in the day, and the jig saved me, its worth a shot they are usually only 2-5 bucks, beats buying a new phone.
Sent from my SGH-T999L using xda app-developers app
Click to expand...
Click to collapse
Yeah, thats what I thought and ordered one already. Is recovery process easy as they say in description? They say just plug it in and after 2 sec download logo would appear?
that jtag thing is a micro usb piece probably with some kind of program written in it, why can't developers send those commands through regular usb cable so the phone thinks its jtag?
alex_mib said:
Yeah, thats what I thought and ordered one already. Is recovery process easy as they say in description? They say just plug it in and after 2 sec download logo would appear?
that jtag thing is a micro usb piece probably with some kind of program written in it, why can't developers send those commands through regular usb cable so the phone thinks its jtag?
Click to expand...
Click to collapse
If the jig works for you, yes it is as easy as they say you will get the download mode logo very quickly after plugging the jig into your phone. If it doesn't work the first time, try borrowing someone else's battery because your battery could possibly be dead, it shouldn't be, but that happened to my Vibrant and I thought it was hardbricked, until I tried another battery, also sometimes the cheaper jigs won't work if your battery isn't fully charged, the one I bought didn't work the second time I used it, battery was around 70-80% I replaced the resistors with some I bought at fry's and it works every time, probably something to do with the quality of resistors being used. If they show a jtag as just a micro usb then its labeled wrong, jtag is usually performed with a riff box, both software and hardware are required to perform a jtag service, and it usually involves getting access to certain contact points on the motherboard, send me the link to what they are calling a jtag I would like to look at it, but most likely it's just a jig, Jtags are pretty expensive because of the type of software they require.
Sent from my SGH-T999L using xda app-developers app
MotoDefier said:
If the jig works for you, yes it is as easy as they say you will get the download mode logo very quickly after plugging the jig into your phone. If it doesn't work the first time, try borrowing someone else's battery because your battery could possibly be dead, it shouldn't be, but that happened to my Vibrant and I thought it was hardbricked, until I tried another battery, also sometimes the cheaper jigs won't work if your battery isn't fully charged, the one I bought didn't work the second time I used it, battery was around 70-80% I replaced the resistors with some I bought at fry's and it works every time, probably something to do with the quality of resistors being used. If they show a jtag as just a micro usb then its labeled wrong, jtag is usually performed with a riff box, both software and hardware are required to perform a jtag service, and it usually involves getting access to certain contact points on the motherboard, send me the link to what they are calling a jtag I would like to look at it, but most likely it's just a jig, Jtags are pretty expensive because of the type of software they require.
Sent from my SGH-T999L using xda app-developers app
Click to expand...
Click to collapse
Yeah, youre right, it's jig http://www.ebay.com/itm/USB-Jig-Don...Phone_PDA_Cables_Adapters&hash=item51acb6eae7
Do you think it will work?
Another option I saw on ebay you can send your phone to somebody and they fix it for 25-50$ + shipping.