Develop Bugs

Need help

Hey guys need some help. I updated my note 2 i317m to 4.3 after install was done. Phone booted everything worked except no phone or data signal, wifi works. When I went into network setting message came up no sim access in network. I was on ditto rom before working fine. I went back to 4.1.1 and same thing loaded fine but no phone signal only wifi. I also notice In about phone imei says unknown network unknown baseband version unknown. I tried installing without sim but same thing. Can anyone else plsssss.
Sent from my SM-T210/SM-T210R using xda app-developers app

1mile said:
Hey guys need some help. I updated my note 2 i317m to 4.3 after install was done. Phone booted everything worked except no phone or data signal, wifi works. When I went into network setting message came up no sim access in network. I was on ditto rom before working fine. I went back to 4.1.1 and same thing loaded fine but no phone signal only wifi. I also notice In about phone imei says unknown network unknown baseband version unknown. I tried installing without sim but same thing. Can anyone else plsssss.
Sent from my SM-T210/SM-T210R using xda app-developers app
Click to expand...
Click to collapse
You need to set the SE LINUX to permissive. It can be done in either x posed settings with Wanam or with the SE LINUX CHANGER app from the play store. Both require root.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

See the screen shots below.
Either way works
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

I'll give it a try let u know the outcome soon
Sent from my SM-T210/SM-T210R using xda app-developers app

Hey shrekopher,
is it avaliable for 4.1.1. Playstore says its not. Should I update to 4.1.2 or 4.3?
ShrekOpher said:
See the screen shots below.
Either way works
View attachment 2493029
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
Sent from my SM-T210/SM-T210R using xda app-developers app

1mile said:
Hey shrekopher,
is it avaliable for 4.1.1. Playstore says its not. Should I update to 4.1.2 or 4.3?
Sent from my SM-T210/SM-T210R using xda app-developers app
Click to expand...
Click to collapse
SELINUX is new for 4.3 only

Well installed 4.3 again. The used the root 4.3 to get root access. Installed x posed. Checked the 3 options that are required rebooted. Still same thing
Sent from my SM-T210/SM-T210R using xda app-developers app

1mile said:
Well installed 4.3 again. The used the root 4.3 to get root access. Installed x posed. Checked the 3 options that are required rebooted. Still same thing
Sent from my SM-T210/SM-T210R using xda app-developers app
Click to expand...
Click to collapse
Go into your phone and check the "About Device" > Status section. Se if anything is under the baseband and IMEI.
It may have gotten deleted when you went to 4.3. We can fix it if it has.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
---------- Post added at 09:15 PM ---------- Previous post was at 09:01 PM ----------
ShrekOpher said:
Go into your phone and check the "About Device" > Status section. Se if anything is under the baseband and IMEI.
It may have gotten deleted when you went to 4.3. We can fix it if it has.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
If you want you can get to 4.3 with working signal below. The first one will update you to 4.3 android and 4.3 bootloader w/ knox. The second will get you root back. (It will trip knox but that's no big deal) once you have root back download ROM manager and install CWM. Then I recommend flashing JediMasterX 2 as your rom. But that is more preference, their are a lot of good roms.
One click Odin AT&T 4.3 update Note2 -> http://forum.xda-developers.com/showthread.php?t=2496292 direct download link https://mega.co.nz/#!alo3HAZC!L8nSwjeElTwJP2hTcsWQu2cjh8hQCpuNaccpX2__ph4
youtube video with instructions https://www.youtube.com/watch?v=zwUdd_SkzSQ
CF Auto Root -> http://forum.xda-developers.com/showthread.php?t=1980644
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

1mile said:
Well installed 4.3 again. The used the root 4.3 to get root access. Installed x posed. Checked the 3 options that are required rebooted. Still same thing
Sent from my SM-T210/SM-T210R using xda app-developers app
Click to expand...
Click to collapse
Who is your carrier?
How did you update to 4.3 originally? You stated you updated to 4.3 and lost signal/data......

Im with rogers. I updated through odin. 3.07.
Sent from my SM-T210/SM-T210R using xda app-developers app

ShrekOpher said:
Go into your phone and check the "About Device" > Status section. Se if anything is under the baseband and IMEI.
It may have gotten deleted when you went to 4.3. We can fix it if it has.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
---------- Post added at 09:15 PM ---------- Previous post was at 09:01 PM ----------
If you want you can get to 4.3 with working signal below. The first one will update you to 4.3 android and 4.3 bootloader w/ knox. The second will get you root back. (It will trip knox but that's no big deal) once you have root back download ROM manager and install CWM. Then I recommend flashing JediMasterX 2 as your rom. But that is more preference, their are a lot of good roms.
One click Odin AT&T 4.3 update Note2 -> http://forum.xda-developers.com/showthread.php?t=2496292 direct download link https://mega.co.nz/#!alo3HAZC!L8nSwjeElTwJP2hTcsWQu2cjh8hQCpuNaccpX2__ph4
youtube video with instructions https://www.youtube.com/watch?v=zwUdd_SkzSQ
CF Auto Root -> http://forum.xda-developers.com/showthread.php?t=1980644
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
****I updated the above post with the direct download links and the youtube instructional video****

TW KitKat 4.4.2 for international i9505?

http://www.sammobile.com/2014/01/10...-kitkat-test-firmware-for-galaxy-s4-gt-i9505/
Sent from my SGH-M919 using Tapatalk 2

epsix said:
http://www.sammobile.com/2014/01/10...-kitkat-test-firmware-for-galaxy-s4-gt-i9505/
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
Is it possible to get this leaked build running on the T-Mobile variant?

Yes... But need Dev to cook a ROM for us. Its just like Roms in i9505 section.
Sent from my SGH-M919 using Tapatalk 2

I'll make an Odin for people when i get home.
Sent from my SGH-M919 using Tapatalk

ShinySide said:
I'll make an Odin for people when i get home.
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Just to be clear, the Odin-able ROM will contain Knox, thus flashing it will result in the installation of the e-fuse? Hence if folks attempt to revert, the Knox counter will then trip?

Dr. Fed said:
Just to be clear, the Odin-able ROM will contain Knox, thus flashing it will result in the installation of the e-fuse? Hence if folks attempt to revert, the Knox counter will then trip?
Click to expand...
Click to collapse
Won't contain the boot loader. So no Knox flag and should be revert able. Shouldn't trip anything since it's official firmware
Sent from my SGH-M919 using Tapatalk

ShinySide said:
Won't contain the boot loader. So no Knox flag and should be revert able. Shouldn't trip anything since it's official firmware
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Cool thanks. I know it wouldn't trip anything if installed, I was just concerned about reverting out of it. My understanding is that once Knox is on, the Knox counter is active. However, whay you're saying is thay the e fuse/Knox counter is boot loader dependent, therefore problem solved by removing the official Leak's boot loader... Correct?
Do you sub the boot loader with a previous version's boot loader? And if that's the case, would we expect the same kind of problems that were encountered with the 4.3 builds (sound, connectivity) until the hybrid modem solution was applied?

Dr. Fed said:
Cool thanks. I know it wouldn't trip anything if installed, I was just concerned about reverting out of it. My understanding is that once Knox is on, the Knox counter is active. However, whay you're saying is thay the e fuse/Knox counter is boot loader dependent, therefore problem solved by removing the official Leak's boot loader... Correct?
Do you sub the boot loader with a previous version's boot loader? And if that's the case, would we expect the same kind of problems that were encountered with the 4.3 builds (sound, connectivity) until the hybrid modem solution was applied?
Click to expand...
Click to collapse
No just don't add a bootloader at all.
And evidently people are able to revert according to the i9505 thread.
I'm on mk2 everything including bootloader. Once I have flashed it I'll provide full info if it trips anything.
Dunno yet. I'd imagine you'd at least need the mk2 modem. The modems will be removed too. They'll fail in Odin and if flashed will cause no service.
Sent from my SGH-M919 using Tapatalk

That will be cool. I will hold and wait for your result.
ShinySide said:
I'll make an Odin for people when i get home.
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse

Guys make sure you do NOT flash this firmware. Its not for Tmobile. Its for DEV , they need to cook a ROM for us.
Sent from my SGH-M919 using Tapatalk 2

epsix said:
Guys make sure you do NOT flash this firmware. Its not for Tmobile. Its for DEV , they need to cook a ROM for us.
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
You listened to the modder too much.
What exactly do you think this "cooking" thing you speak of? Deodexing and zip aligning with the kitchen?
Sent from my SGH-M919 using Tapatalk

ShinySide said:
You listened to the modder too much.
What exactly do you think this "cooking" thing you speak of? Deodexing and zip aligning with the kitchen?
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
I'm not a Dev,but don't have put it in dsixda's Android Kitchen and remove bootloader etc and deoxed or odex?
Sent from my SGH-M919 using Tapatalk 2

ShinySide, Cant wait for your results. :laugh:
ShinySide said:
You listened to the modder too much.
What exactly do you think this "cooking" thing you speak of? Deodexing and zip aligning with the kitchen?
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse

epsix said:
I'm not a Dev,but don't have put it in dsixda's Android Kitchen and remove bootloader etc and deoxed or odex?
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
Hahaha no. Odex and Deodexing has absolutely nothing to do with it. Nor the kitchen.
Do things need removed? Yes. Bootloader and modem's would be one. They fail in odin. You can even flash the recovery if you wanted.
I did the same thing with 4.3 update. No kitchen needed. No fancy fake cooking. Or any other crap another has said.
I'll show you in the next 2 hours. Should be heading home in a few.
Sent from my SGH-M919 using Tapatalk

ShinySide said:
Hahaha no. Odex and Deodexing has absolutely nothing to do with it. Nor the kitchen.
Do things need removed? Yes. Bootloader and modem's would be one. They fail in odin. You can even flash the recovery if you wanted.
I did the same thing with 4.3 update. No kitchen needed. No fancy fake cooking. Or any other crap another has said.
I'll show you in the next 2 hours. Should be heading home in a few.
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Sorry wasn't mean to offend you ,I guest you know what you're doing. I just don't want newbie like myself to just DL this and flash it.
Sent from my SGH-M919 using Tapatalk 2

ShinySide said:
Hahaha no. Odex and Deodexing has absolutely nothing to do with it. Nor the kitchen.
Do things need removed? Yes. Bootloader and modem's would be one. They fail in odin. You can even flash the recovery if you wanted.
I did the same thing with 4.3 update. No kitchen needed. No fancy fake cooking. Or any other crap another has said.
I'll show you in the next 2 hours. Should be heading home in a few.
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Doesn't seem like is going to be so easy the guys over at the international version are trying to cook a rom without much success this is from iB4STiD which builds all the goldeneye roms
iB4STiD said:
4.4 so far
well.. the security on this is odd.. the kernel is either doing a check with the bootloader or its security check come in at the later part of the boot cycle .. its different i can say that .. but this is a leak of a beta who knows.. im still trying to get this stupid thing to boot we shall see.. dont hold ur breath until we get a kernel security bypass .. but it could be worse .. gotta love sammy!!
Click to expand...
Click to collapse

He's trying to modify it. I don't modify. I'm not a rom modder of factory firmware. I'll build Carbon, aokp, etc but not a modder.
What I'll give? Is factory touchwiz 4.4.
Sent from my SGH-M919 using Tapatalk

ShinySide said:
He's trying to modify it. I don't modify. I'm not a rom modder of factory firmware. I'll build Carbon, aokp, etc but not a modder.
What I'll give? Is factory touchwiz 4.4.
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Sounds good Let me know if you get it working I'll flash it and give it a shot...... I know they chainfire has a root for it also

I tripped both flags on mk2 bootloader and phone reads custom , not that I care but , and wifi isn't working at the moment but everything else is
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-I9505 using Tapatalk

ShinySide said:
He's trying to modify it. I don't modify. I'm not a rom modder of factory firmware. I'll build Carbon, aokp, etc but not a modder.
What I'll give? Is factory touchwiz 4.4.
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
ShinySide said:
I tripped both flags on mk2 bootloader and phone reads custom , not that I care but , and wifi isn't working at the moment but everything else is
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
Yeah mines have been tripped for a while so it doesn't bother me at all either lol..... Weird that the wifi isn't working tho ??? Are you getting any signal lost or is the 4.3 radio working good ??

KitKat Official 4.4 update "M919UVUFNB4" BASEBAND/Modem/FIXED FIRMWARE/ROOT/

KitKat Official 4.4 update "M919UVUFNB4" BASEBAND/Modem/FIXED FIRMWARE/ROOT/
Has anybody gotten a hold of the full firmware or just the baseband for 4.4 that was released for the tmo version??? anybody has it uploaded somewhere that downloads at a reasonable speed ???
I will upload it on mega once I get my hands on it if nobody has gotten it before I do so everyone else could download
Android version 4.4.2 / Baseband version M919UVUFNB4
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The KitKat update brings improved stability, and major features include white status bar icons, improved performance, reduced memory usage, improvements to Samsung’s onscreen keyboard in landscape mode, inbuilt wireless printing support, ability to select the default launcher and messaging app from the settings menu, a camera shortcut and full-screen album art on the lock screen, and new emojis. You might also find that most apps are lesser access to the external storage than before, which is by Google’s design and hence something you’ll have to live with.
Improvements:
KitKat
Improved stability
New camera shortcut on the lock screen
Improved on screen keyboard
Prerequisites
M919UVUEMK2
Device software is not rooted
50% battery life
Latest version of Kies software downloaded on PC or MAC
Data connection
File size of update is 388 MB.
There is already a ROOT Method for our KITKAT UPDATE in the link below " I DO NOT TAKE CREDIT AS I FOUND ALL THIS SEARCHING "
http://true-android.blogspot.com/2014/03/root-m919uvufnb4-t-mobile-galaxy-s4.html
here is Chainfire Cf Auto root which works on 4.4
http://download.chainfire.eu/328/CF-Root/CF-Auto-Root/CF-Auto-Root-jfltetmo-jfltetmo-sghm919.zip
Update Package uploaded by ShinySide <~~~ I believe you need to be on stock 4.3 to use this, That's how I updated to 4.4 without the OTA Download
https://mega.co.nz/#!U0kgSBgL!oTyV07Oy7OQMtZsen4wxybh3s9ZYT0jeJsC-oe2wR84
4.3 Stock mk2 Firmware in case anybody needs it
https://mega.co.nz/#!44AgmayA!tPmGd4U_luXwiOhWibdblB1EXiJMwK4nlKaJz11wznI
4.4 Baseband thanks 2 @Fenny make sure to thank him for this
https://mega.co.nz/#!k1gEzDgQ!nDZe4sVHm9UEeZOaC1UKAxUnoLmQZGYCQ5VLvX6dFag
Download file and flash MODEM.bin thru ODIN under phone if you are using an older ODIN if you are using Odin 3.09 select Cp
4.4 to Full-Firmware
Actually fixed by @Fenny since the one release by Samsung doesn't even work........ deff go and thank him for this
http://www.cheatersedge.org/android/m919/M919UVUFNB4_M919TMBFNB4_TMB_FENNY_FIXED.zip

Added----- Update Package uploaded by ShinySide <~~~ I believe you need to be on stock 4.3 to use this, That's how I updated to 4.4 without the OTA Download
https://mega.co.nz/#!U0kgSBgL!oTyV07Oy7OQMtZsen4wxybh3s9ZYT0jeJsC-oe2wR84

Saving this one

gdmlaz said:
Added----- Update Package uploaded by ShinySide <~~~ I believe you need to be on stock 4.3 to use this, That's how I updated to 4.4 without the OTA Download
https://mega.co.nz/#!U0kgSBgL!oTyV07Oy7OQMtZsen4wxybh3s9ZYT0jeJsC-oe2wR84
Click to expand...
Click to collapse
If this were flashed on stock 4.3 with Knox flag triggered would it not work, brick or work?
Sent from my SGH-M919 using Tapatalk

DylanTheVillian said:
If this were flashed on stock 4.3 with Knox flag triggered would it not work, brick or work?
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Knox could be triggered it doesn't matter..... My device has knox triggered since a long time ago and upgraded to 4.4 just fine WIFI calling is working you just need to flash a costum kernel after to make WIFI work "I USED ADAM KERNEL" I'm sure any other tw 4.4 kernel will work just fine also..... for some reason this package doesn't update the baseband leaves it on the mk2
http://wanamlite.com/2014/03/06/adam-kernel-galaxys4-lte-v2-1-android-kitkat/ <~~~ ADAM KERNEL

I just got done with the OTA and I'm still have the MK2 baseband. How can I get the newer one?

imanoobfml said:
I just got done with the OTA and I'm still have the MK2 baseband. How can I get the newer one?
Click to expand...
Click to collapse
Is weird that the OTA update is not upgrading us to the newer baseband...... I guess we have to wait till the complete firmware is out that will deff upgrade us to the new Baseband ???? is ur WIFI working after the OTA update ?? with stock kernel ?
THE ACTUAL FIRMWARE hasn't been released to download so we'll have to wait till is uploaded
I actually see that some people got updated to the newer BASEBAND with the OTA update and some DIDN'T that's just weird..... I guess the unlucky ones have to wait till the full firmware is released

@gdmlaz did you odin the update?
Sent from my SGH-M919 using Tapatalk

princeasi said:
@gdmlaz did you odin the update?
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
I actually updated it by going into the FACTORY RECOVERY and flashing it from an external sd card...... maybe that's why my baseband didn't get updated ????

@gdmlaz thanks. Did you need to restore your data?
Sent from my SGH-M919 using Tapatalk

princeasi said:
@gdmlaz thanks. Did you need to restore your data?
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Nope everything how it was before no need to reinstall apps/or data

gdmlaz said:
I actually updated it by going into the FACTORY RECOVERY and flashing it from an external sd card...... maybe that's why my baseband didn't get updated ????
Click to expand...
Click to collapse
The only reason I updated was for the newer baseband. I guess I'll just wait for it. I didn't really try out the stock at all. I just finished the update and after Rooting and custom recovery, I'm restoring my GPE rom. I can't take TW.

imanoobfml said:
The only reason I updated was for the newer baseband. I guess I'll just wait for it. I didn't really try out the stock at all. I just finished the update and after Rooting and custom recovery, I'm restoring my GPE rom. I can't take TW.
Click to expand...
Click to collapse
Yea my main reason for me was also the baseband since I use mostly International Roms........ Don't have 2 much need in Wifi calling also.....

gdmlaz said:
Yea my main reason for me was also the baseband since I use mostly International Roms........ Don't have 2 much need in Wifi calling also.....
Click to expand...
Click to collapse
Agreed. Only interested in the baseband.. I Will wait.

When I try installing update zip via philz recovery it gives me a status error 7 anyone getting this
Sent from my SGH-M919 using XDA Premium 4 mobile app

Romcrazguy said:
When I try installing update zip via philz recovery it gives me a status error 7 anyone getting this
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You need to use the stock recovery comes from the stock Rom.
Sent from my GT-I9505G using Tapatalk

Cwm or twrp
Sent from my SGH-M919 using XDA Premium 4 mobile app

gdmlaz said:
Is weird that the OTA update is not upgrading us to the newer baseband...... I guess we have to wait till the complete firmware is out that will deff upgrade us to the new Baseband ???? is ur WIFI working after the OTA update ?? with stock kernel ?
THE ACTUAL FIRMWARE hasn't been released to download so we'll have to wait till is uploaded
I actually see that some people got updated to the newer BASEBAND with the OTA update and some DIDN'T that's just weird..... I guess the unlucky ones have to wait till the full firmware is released
Click to expand...
Click to collapse
My baseband got updated and I took the ota and already rooted it working great!
Sent from my SGH-M919 using Tapatalk

style154 said:
My baseband got updated and I took the ota and already rooted it working great!
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Were you previously rooted before updating?
Sent from my SGH-M919 using Tapatalk

princeasi said:
Were you previously rooted before updating?
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Well I was but odined the stock unrooted firmware and took ota because tmobile somehow knows if you're rooted I even moved supersu, the only modified system file I had to data/app and still couldn't take the ota. Kept getting a message my device was modified. So I was unrooted when I took the ota
Sent from my SGH-M919 using Tapatalk

[FULL RESTORE][TAR] Stock NDC Odin FLASHABLE [4.4.2] [BOOST/VM]

Nothing fancy, just the Boost/VM variant of 4.4.2 Kit Kat tar, captured from Kies.
NOTE: For those Boost/VM users who flashed the Sprint ND8 version, this WILL flash successfully over the ND8 bootloader.
- This will (should) not wipe your data.
- As with everything, you are responsible for what you do to your device.
- I have Deodexed and Odexed rooted stock zips ready to test if someone wants to give them a go. Let me know.
Download Link
Instructions:
1. Download file to your PC(somewhere you can find it!)
2. Put your phone into Download/Odin mode
3. Start Odin(I suggest the latest, 3.09 is out now I think, I used 3.07)
4. Click on PDA, find tar file, click it to put it into PDA slot
5. Click Start
6. Takes a good 15 minutes, so sit back and chill. It will reboot on it's own, and you now have Kit Kat.
Oh, and because I know someone will ask, YES, this does have the Knox bootloader on it

Does anyone have the modem from this build. Hoping it will fix issues I'm having with ND8 modem.
Sent from my SPH-L710 using XDA Premium 4 mobile app

marcran75 said:
Does anyone have the modem from this build. Hoping it will fix issues I'm having with ND8 modem.
Sent from my SPH-L710 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It's the last download link in the OP below. Good luck!
http://forum.xda-developers.com/showthread.php?p=53219958
Sent from my SM-G900P using XDA Free mobile app

jdsingle76 said:
It's the last download link in the OP below. Good luck!
http://forum.xda-developers.com/showthread.php?p=53219958
Sent from my SM-G900P using XDA Free mobile app
Click to expand...
Click to collapse
No dice. Wiped cache and dalvik, flashed modem and wiped cache and dalvik again for good measure. Wi-Fi won't even turn on.
Sent from my SPH-L710 using XDA Premium 4 mobile app

marcran75 said:
No dice. Wiped cache and dalvik, flashed modem and wiped cache and dalvik again for good measure. Wi-Fi won't even turn on.
Sent from my SPH-L710 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It did the same thing for me on nd8 boot loader. Try a custom kernel perhaps. KT747 was recommended to me for that fix, but I flashed ndc before I got around to trying it
Sent from my SM-G900P using XDA Free mobile app

jdsingle76 said:
It did the same thing for me on nd8 boot loader. Try a custom kernel perhaps. KT747 was recommended to me for that fix, but I flashed ndc before I got around to trying it
Sent from my SM-G900P using XDA Free mobile app
Click to expand...
Click to collapse
I can confirm it works.
Sent from my SPH-L710 using XDA Premium 4 mobile app

marcran75 said:
I can confirm it works.
Sent from my SPH-L710 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yep ktoonsez's custom kernal is awsome.
SPH-L710 SGS3 Bilgerryan's Wicked X Kit Kat v7.0 with s5 ported apps - Powered by Ktoonsez's KT747

marcran75 said:
I can confirm it works.
Sent from my SPH-L710 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Awesome, glad it worked out for you. I'll post that fix in the OP.
Sent from my SM-G900P using XDA Free mobile app

Im going to stick with the nd8 modem. I thought about trying this but everything is working fine. I use virgin mobile and i use xda. When i bought my s3 i couldn't find kit kat for virgin so i researched the sprint tar. I was only on the stock virgin 4.3 for a day, and rooted and what not. I odined sprint s3 stock nd8 tar through odin3.07 with reboot unticked- pulled battery - odined philz touch recovery(spr) reboot unticked - pulled battery. Then i booted into recovery flashed newest philz (lte) recovery. Then i flashed bilgerryans wicked x rom. Phone is now rooted, deodexed, and has custom kernal. Phone works great, especially since i changed data setting for throttling. Hope this helps someone. My exact steps i took to get my phone to awsomeness.
SPH-L710 SGS3 Bilgerryan's Wicked X Kit Kat v7.0 with s5 ported apps - Powered by Ktoonsez's KT747

Just Odin'd my GS3 today with this and everything went well. My drop down notification bar says Virgin Mobile like it should. No problems except not receiving a 4G signal where I used to. It doesn't even say 3g. Is there something I should know about this? LOL. Any help appreciated.
Sent from my SAMSUNG-SM-G900A using XDA Premium 4 mobile app

PS4AndroidHacker said:
Just Odin'd my GS3 today with this and everything went well. My drop down notification bar says Virgin Mobile like it should. No problems except not receiving a 4G signal where I used to. It doesn't even say 3g. Is there something I should know about this? LOL. Any help appreciated.
Sent from my SAMSUNG-SM-G900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Update your Profile and PRL in Settings/More/System Updates
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

PS4AndroidHacker said:
Just Odin'd my GS3 today with this and everything went well. My drop down notification bar says Virgin Mobile like it should. No problems except not receiving a 4G signal where I used to. It doesn't even say 3g. Is there something I should know about this? LOL. Any help appreciated.
Click to expand...
Click to collapse
Hi! Update PRL and Profile from the Settings / More / System Update menu.
If that doesn't do it, there's a code to dial in the stock dialer to reset data. I need to add it to my contacts some I keep forgetting. ##73678# or something like that. Be prepared, I think it reboots your phone in the process. Then update PRL and Profile again after.
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Wicked X v6.5, Ktoonsez' latest kernel and the latest Philz Touch Recovery.

roirraW "edor" ehT said:
Hi! Update PRL and Profile from the Settings / More / System Update menu.
If that doesn't do it, there's a code to dial in the stock dialer to reset data. I need to add it to my contacts some I keep forgetting. ##73678# or something like that. Be prepared, I think it reboots your phone in the process. Then update PRL and Profile again after.
@bilgerryan, what's the code? TIA
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Wicked X v6.5, Ktoonsez' latest kernel and the latest Philz Touch Recovery.
Click to expand...
Click to collapse
##72786#
Sent from my SPH-L710 using XDA Premium 4 mobile app

marcran75 said:
##72786#
Click to expand...
Click to collapse
Thank you, sir! Going in my contacts now.
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Wicked X v6.5, Ktoonsez' latest kernel and the latest Philz Touch Recovery.

Is there a KnoxFree release of this yet? Am I just blind?

FatalIll said:
Is there a KnoxFree release of this yet? Am I just blind?
Click to expand...
Click to collapse
If your waiting for a knox free version.... You will be waiting forever. Its not going to happen. There is no way to take knox out of the bootloader, trust me everyone has been trying... Knox just makes it were you cant downgrade through odin. You can flash any rom version you want in recovery.
http://i1265.photobucket.com/albums...f-1145-4404-8c04-3460628ca1bf_zps4f663980.jpg
@the_original_teknikl
PCB Wicked Blue Theme
@TONY6669
Mean Wicked Green Theme
Pink for Breast Cancer Theme(4 4 2 port soon)
@TeamBlackOut
Themed Apps
@roirraw"edor"eht
Plasma Battery Mod

n00b-xda-disciple said:
If your waiting for a knox free version.... You will be waiting forever. Its not going to happen. There is no way to take knox out of the bootloader, trust me everyone has been trying... Knox just makes it were you cant downgrade through odin. You can flash any rom version you want in recovery.
http://i1265.photobucket.com/albums...f-1145-4404-8c04-3460628ca1bf_zps4f663980.jpg
@the_original_teknikl
PCB Wicked Blue Theme
@TONY6669
Mean Wicked Green Theme
Pink for Breast Cancer Theme(4 4 2 port soon)
@TeamBlackOut
Themed Apps
@roirraw"edor"eht
Plasma Battery Mod
Click to expand...
Click to collapse
MK5 was made KNOX free... Hell, I have MK5 modem & bootloader, completely KNOX free...

FatalIll said:
MK5 was made KNOX free... Hell, I have MK5 modem & bootloader, completely KNOX free...
Click to expand...
Click to collapse
And Knox was further incorporated into the device with 4.4 (and it will be in all Android devices to some extent with Android L). It makes a call to see if Knox is present at first boot, if it's not there it bricks the device. All the newer devices have it too. Unless you're planning on sending your phone to Samsung for a warranty claim there no reason to even think about it being there.

bilgerryan said:
And Knox was further incorporated into the device. It makes a call to see if Knox is present at first boot, if it's not there it bricks the device. All the newer devices have it too. Unless you're planning on sending your phone to Samsung for a warranty claim there no reason to even think about it being there.
Click to expand...
Click to collapse
Last time I had KNOX, I flashed a new recovery ZIP and bricked the phone. I don't want to tip-toe around KNOX if its there, I dont want to have to worry about it all together. If I just flash the Modem, will I get KNOX or will it just update the PRL and such?

FatalIll said:
Last time I had KNOX, I flashed a new recovery ZIP and bricked the phone. I don't want to tip-toe around KNOX if its there, I dont want to have to worry about it all together. If I just flash the Modem, will I get KNOX or will it just update the PRL and such?
Click to expand...
Click to collapse
To get 4.4.2 without bricking... You need to odin 4.4.2 stock tar and odin 4.4 2 compatible recovery afterwards. Any other way will lead to brick. I never have to worry about knox because the only tar i have is the 4.4.2. I flash whatever rom i want in recovery with no problems. Like Bilgerryan said knox really only affects you, if your trying to return your phone to samsung with knox tripped. Im loving 4.4.2 im glad i made the plunge.
http://i1265.photobucket.com/albums...f-1145-4404-8c04-3460628ca1bf_zps4f663980.jpg
@the_original_teknikl
PCB Wicked Blue Theme
@TONY6669
Mean Wicked Green Theme
Pink for Breast Cancer Theme(4 4 2 port soon)
@TeamBlackOut
Themed Apps
@roirraw"edor"eht
Plasma Battery Mod

[ROM]Official[317/317M](7/08) [SaberKat 1.5][4.4.2 KITKAT TW]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to SaberKat Android TouchWiz 4.4.2. This is a Semi-Stock ROM with a few speed tweaks and a slightly modified kernel to allow permmisive state. Includes several S5 apps and probably more to come but who knows what I'll do with this thing. The ROM includes Xposed, Wanam and SE Mode Switcher used to activate permissive kernel. Updates are planned including at some point possibly implementing my own custom kernel.
Download: SaberKat 1.5
Download: SaberKat 1.0
SuperSU download: SuperSU
If you are still on the old 4.1.2 bootloader then you will need to flash agni kernel for WiFi
AGNI Download: AGNI Purestock Thread
AGNI External SD write fix. Should work with any kernel. Download: AGNI KK SD fix
New ATT 4.4.2 Modem: I317UCUCNE5_Modem.zip
New Canadian 4.4.2 Modem: I317MVLUDNF1 Modem.zip
HOW TO INSTALL
Download the zip
WIPE DATA/FACTORY RESET
Wipe System
Wipe Cache/Dalvic Cache
Flash the Rom
Reboot
Set up APN, save and select. Go back and turn on Flight Mode. Now turn off flight mode. Network switch now available but should be LTE on default. If not change it. Reboot to recovery (4 Way Reboot now standard) and flash SuperSU. Reboot and enjoy
Enjoy
Thanks to these fine folks here for helping me: @eZdubzitmk4 for helping me acclimate to TouchWiz as almost all my experience has been with AOSP. @gregsarg for numerous tests and continued effort. Not to mention hours of mind numbing searching and countless valuable input. @Mr.Bola for the S5 apps
Notes:Unobtrusive calling only works when in app. Messaging quick reply go to message settings, notifications and enable pop up. That's all for now, have to check what all I've actually changed. ENJOY THE ROM
Disclaimer:/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications.
*/

Reserved #1
If this is in the wrong section/thread please let me know guys as I have the ATT model so I wasn't quite sure

rogersb11 said:
Reserved #1
If this is in the wrong section/thread please let me know guys as I have the ATT model so I wasn't quite sure
Click to expand...
Click to collapse
No this is good it says ATT but really most Roms work on both

Thanks

This is mine
Sent from my GT-N7105 using XDA Premium 4 mobile app

Mine ..
Thank you !!...
I'm gonna play with this and see what a stock rom feels like for a few...
I appreciate the rom...!!...g
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app

mataflakitas said:
This is mine
Sent from my GT-N7105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
gregsarg said:
Mine ..
Thank you !!...
I'm gonna play with this and see what a stock rom feels like for a few...
I appreciate the rom...!!...g
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
MINE MUAHAHAHAHA. lol Also I'm deodexing and debloating right now so i'll reupload once it's finished. Thanks guys

Got it booted on stock kernel. ..
Runs nice. ...
I'm editing the build.prop now...
Stock DPI is different than the US roms. ..but no complaints. .
I'm gonna play some more. ..lol
Edit:
Camera is sweet !!
Same interface. ..but snappy and clear. ..
Video is nice too..g
Sent from my SGH-I317M using XDA Premium 4 mobile app

Could we flash this on at&t i317?
Sent from my SGH-I317 using XDA Premium 4 mobile app
---------- Post added at 09:54 PM ---------- Previous post was at 09:54 PM ----------
Like has anyone tried it yet?
Sent from my SGH-I317 using XDA Premium 4 mobile app

Stock ROM SGH-I317M[4.4.2 KITKAT TW]
terpin32 said:
Could we flash this on at&t i317?
Sent from my SGH-I317 using XDA Premium 4 mobile app
---------- Post added at 09:54 PM ---------- Previous post was at 09:54 PM ----------
Like has anyone tried it yet?
Sent from my SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Gregs has. Doubled flash. I'd use Agni stock until I work out the kernel but it does work. Smooth. Enjoy. Be updating the OP soon

rogersb11 said:
Gregs has. Doubled flash. I'd use Agni stock until I work out the kernel but it does work. Smooth. Enjoy. Be updating the OP soon
Click to expand...
Click to collapse
Sweet will give it a try when I get home and let you guys know how it went
Sent from my SGH-I317 using XDA Premium 4 mobile app

The rom definitely works on AT&T but is there a way to edit the apn (I know how to edit the apn) type as all that's available is internet+mms or one or the other?
Sent from my SGH-I317 using Tapatalk

cnote74 said:
The rom definitely works on AT&T but is there a way to edit the apn (I know how to edit the apn) type as all that's available is internet+mms or one or the other?
Sent from my SGH-I317 using Tapatalk
Click to expand...
Click to collapse
Works on ATT for sure but I had to flash agni. Change network type to lte instead of w something. Don't have phone on me this instant. Rom is deodexing now and then I'm going to reupload

rogersb11 said:
Works on ATT for sure but I had to flash agni. Change network type to lte instead of w something. Don't have phone on me this instant. Rom is deodexing now and then I'm going to reupload
Click to expand...
Click to collapse
I can't edit that as I changed my build.prop to AT&T so that option isn't available to me.
Sent from my SGH-I317 using Tapatalk

Hmm.... I did mine first. I'll look into it. Plan on doing something with the kernel in real release. You using Agni?

rogersb11 said:
Hmm.... I did mine first. I'll look into it. Plan on doing something with the kernel in real release. You using Agni?
Click to expand...
Click to collapse
I'm using agni kernel didn't know if this would boot with the i317m kernel on a i317.
Sent from my SGH-I317 using Tapatalk

I've heard it has but it wouldn't for me. Try using the code *#*#4636#*#* and changing it from there

rogersb11 said:
I've heard it has but it wouldn't for me. Try using the code *#*#4636#*#* and changing it from there
Click to expand...
Click to collapse
I think that code might be deleted as I've heard a lot of usd codes weren't working anymore.
Sent from my SGH-I317 using Tapatalk

cnote74 said:
I think that code might be deleted as I've heard a lot of usd codes weren't working anymore.
Sent from my SGH-I317 using Tapatalk
Click to expand...
Click to collapse
Yep just tried. Noted. Oh wait. You edited prop. Bet you broke root. Flash supersu zip and see if you can edit then

rogersb11 said:
Yep just tried. Noted. Oh wait. You edited prop. Bet you broke root. Flash supersu zip and see if you can edit then
Click to expand...
Click to collapse
Root Isn't broken it's not a big problem I can survive with it like this.
Sent from my SGH-I317 using Tapatalk